0 valutazioniIl 0% ha trovato utile questo documento (0 voti)
22 visualizzazioni3 pagine
LAN connection to the Succession Media Card enables a user to telnet to the Text-based User Interface (see page 155) from a remote site and interact with the card in the same way as using a localmaintenance terminal. To use the FTP downloads and uploads capability, a permanent assignment of an IP address is required.
LAN connection to the Succession Media Card enables a user to telnet to the Text-based User Interface (see page 155) from a remote site and interact with the card in the same way as using a localmaintenance terminal. To use the FTP downloads and uploads capability, a permanent assignment of an IP address is required.
LAN connection to the Succession Media Card enables a user to telnet to the Text-based User Interface (see page 155) from a remote site and interact with the card in the same way as using a localmaintenance terminal. To use the FTP downloads and uploads capability, a permanent assignment of an IP address is required.
Configuring the IP address, subnet mask, Gateway and IP method
1 Log in to the MIRAN III Text-based User Interface by entering the user name and password and selecting -Login- at the login screen. Refer to Login screen on page 160 for further information. 2 At the Main Menu, select -2- to access the Pack Administration menu. 3 At the Pack Administration menu, select -5- to access the Ethernet Configuration screen. 4 A the Ethernet Configuration screen, enter the new IP address, subnet mask, gateway, and IP method. This new information writes over any old LAN configuration information that the card contains. 5 Select -Set- to set the new LAN configuration information. A confirmation notice at the bottom of the Ethernet Configuration screen indicates successful completion of the task. Refer to Ethernet Configuration screen on page 208 for further information. 6 Reboot the Succession Media Card to activate the new LAN configuration. Procedure 10 Accessing the MIRAN III BUI 1 Enter the IP address of the card in the URL address field of the browser. The MIRAN III BUI login screen appears. 2 Select the username; admin is the default. 3 Enter the password; admin000 is the default password for admin. 4 Click on the Login button. If login is successful, a confirmation message appears. 5 Click on Main Menu. The main MIRAN Administration page appears. End of Procedure After accessing the BUI, OA&M functions can be performed. The LAN connection to the Succession Media Card enables a user to telnet to the Text-based User Interface (see page 155) from a remote site and interact with the Succession Media Card in the same way as using a localmaintenance terminal. To telnet to the Succession Media Card, follow the steps in Procedure 11. Procedure 11 Telneting to the Succession Media Card 1 Use the telnet command from any Operating Systems command line. 2 Use the HyperTerminal program. End of Procedure FTP downloads and uploads LAN connection to the Succession Media Card allows the transfer of files to and from the card using File Transfer Protocol (FTP). To use the FTP capability, the following are required: a connection of the Succession Media Card to the LAN through the Succession Media Card Audio-adaptor a permanent assignment of an IP address to the card Page 76 of 302 Installation and configuration 553-3001-112 Standard 5.00 May 2002 a valid user name and password with which to access the card a standard FTP client application. (The figures in this section show the use of the WS_FTP Professional file transfer client.) To transfer files to and from the Succession Media Card using FTP, follow the steps in Procedure 12. Procedure 12 To tranfer files to and from the Succession Media Card using FTP 1 Open the FTP client application. Select Connect to open a dialog box similar to the one shown in Figure 12. Figure 12 Logging in to the MIRAN through an FTP client application Procedure 10 Accessing the MIRAN III BUI 1 Enter the IP address of the card in the URL address field of the browser. The MIRAN III BUI login screen appears. 2 Select the username; admin is the default. 3 Enter the password; admin000 is the default password for admin. 4 Click on the Login button. If login is successful, a confirmation message appears. 5 Click on Main Menu. The main MIRAN Administration page appears. End of Procedure After accessing the BUI, OA&M functions can be performed. The LAN connection to the Succession Media Card enables a user to telnet to the Text-based User Interface (see page 155) from a remote site and interact with the Succession Media Card in the same way as using a localmaintenance terminal. To telnet to the Succession Media Card, follow the steps in Procedure 11. Procedure 11 Telneting to the Succession Media Card 1 Use the telnet command from any Operating Systems command line. 2 Use the HyperTerminal program. End of Procedure FTP downloads and uploads LAN connection to the Succession Media Card allows the transfer of files to and from the card using File Transfer Protocol (FTP). To use the FTP capability, the following are required: a connection of the Succession Media Card to the LAN through the Succession Media Card Audio-adaptor a permanent assignment of an IP address to the card Page 76 of 302 Installation and configuration 553-3001-112 Standard 5.00 May 2002 a valid user name and password with which to access the card a standard FTP client application. (The figures in this section show the use of the WS_FTP Professional file transfer client.) To transfer files to and from the Succession Media Card using FTP, follow the steps in Procedure 12. Procedure 12 To tranfer files to and from the Succession Media Card using FTP 1 Open the FTP client application. Select Connect to open a dialog box similar to the one shown in Figure 12. Figure 12 Logging in to the MIRAN through an FTP client application Procedure 10 Accessing the MIRAN III BUI 1 Enter the IP address of the card in the URL address field of the browser. The MIRAN III BUI login screen appears. 2 Select the username; admin is the default. 3 Enter the password; admin000 is the default password for admin. 4 Click on the Login button. If login is successful, a confirmation message appears. 5 Click on Main Menu. The main MIRAN Administration page appears. End of Procedure After accessing the BUI, OA&M functions can be performed. The LAN connection to the Succession Media Card enables a user to telnet to the Text-based User Interface (see page 155) from a remote site and interact with the Succession Media Card in the same way as using a localmaintenance terminal. To telnet to the Succession Media Card, follow the steps in Procedure 11. Procedure 11 Telneting to the Succession Media Card 1 Use the telnet command from any Operating Systems command line. 2 Use the HyperTerminal program. End of Procedure FTP downloads and uploads LAN connection to the Succession Media Card allows the transfer of files to and from the card using File Transfer Protocol (FTP). To use the FTP capability, the following are required: a connection of the Succession Media Card to the LAN through the Succession Media Card Audio-adaptor a permanent assignment of an IP address to the card Page 76 of 302 Installation and configuration 553-3001-112 Standard 5.00 May 2002 a valid user name and password with which to access the card a standard FTP client application. (The figures in this section show the use of the WS_FTP Professional file transfer client.) To transfer files to and from the Succession Media Card using FTP, follow the steps in Procedure 12. Procedure 12 To tranfer files to and from the Succession Media Card using FTP 1 Open the FTP client application. Select Connect to open a dialog box similar to the one shown in Figure 12. Figure 12 Logging in to the MIRAN through an FTP client application