0 valutazioniIl 0% ha trovato utile questo documento (0 voti)
261 visualizzazioni1 pagina
Thor broadcast 4 CH YPbPR HD MPEG2 or H.264 encoder + RF Modulator with QAM or ATSC RF output and IP Ethernet output, 4 HD Video incites - 1-4 CATV channel output
It has also IP and DVB-ASI output,
Excellent for private cable channel creation form the video of your choice, for hotels, schools, motels, universities
https://thorbroadcast.com/products/hdmi
Titolo originale
4 channel HD Video Encoder RF modulator, 4 video inputs , 1-4 Channel output ,with IP video ouput and ASI output , Support AC3 audio
Thor broadcast 4 CH YPbPR HD MPEG2 or H.264 encoder + RF Modulator with QAM or ATSC RF output and IP Ethernet output, 4 HD Video incites - 1-4 CATV channel output
It has also IP and DVB-ASI output,
Excellent for private cable channel creation form the video of your choice, for hotels, schools, motels, universities
https://thorbroadcast.com/products/hdmi
Thor broadcast 4 CH YPbPR HD MPEG2 or H.264 encoder + RF Modulator with QAM or ATSC RF output and IP Ethernet output, 4 HD Video incites - 1-4 CATV channel output
It has also IP and DVB-ASI output,
Excellent for private cable channel creation form the video of your choice, for hotels, schools, motels, universities
https://thorbroadcast.com/products/hdmi
Thors YPbPr all in one devices encoding and video distribution platform for broadcast and professional AV systems.
The system is based on a universal multiplex-
ing chassis with two input bays. Thor offers a variety of encoding cards for this platform including YPbPr, HDMI, dual HDMI, HD-SDI, as well as SD analog cards. The entire system is managed through an integrated web server. All configuration settings and parameters can be controlled through the web interface or the front panel LCD display. Parameters for each channel can be set independently; such as bit rate, encoding level, and PID mapping. After encoding, the chassis multiplexes the signals from all inputs and distributes them in three useful formats. The QAM-IP platform outputs programming as a modulated RF television channel, an IPTV multicast or unicast feed, and a DVB-ASI broadcast transport stream simultaneously. All three outputs are available continuously. The RF modulator can be set to any frequency, and 8VSB is available in addition to QAM. The IPTV output is industry standard UDP and is easy to configure for use with media server software or as a stand alone multicast program. DVB-ASI is a broadcast protocol used for transport or contribution of digital video. In addition to ASI output, the chassis also has an ASI input that feeds into the units main multiplexer. This allows an externally created ASI signal to be added to the output programming. This broad feature set allows a Thors YPbPr system to dramatically reduce rack space and total cost. Key Features * MPEG2 HD/SD & MPEG4 AVC H.264 HD/SD video encoding * MPEG4-AAC; MPEG2-AAC; MPEG1 Layer audio encoding * 2 YPbPr / CVBS channel in Single Card, 2 slots available * Modular design, pluggable encoding modules * 1*ASI in for re-mux; 1*RF in for RF mix * Digital RF out (DVB-C/T/ATSC/ISDB-T RF Optional) * ASI out; IP out * VCT (Virtual Channel Table) supports ATSC modulating module * Excellent modulation quality * LCD display, Remote control and firmware * Web-based NMS management; Updates via web * LCN (Logical Channel Number) supports DVB-C/T/ISDB-T modulating module * Lowest cost per channel Video Encoding Encoding: MPEG2; MPEG4 AVC/H.264 Interface: 2 YPbPr, 2 CVBS, 2 S-Video on single card Resolution: 1920*1080_60P, 1920*1080_50P, 1920*1080_60I, 1920*1080_50I, 1280-720_60P, 1280*720_50P Audio Encoding Encoding: MPEG 1 Layer II, MPEG2-AAC; MPEG4-AAC , Audio Interface: Analog Left Right Sample Rate: 480KHz Bit Rate: 64/96/128/192/256/320/384kbps Modulator Specifications : QAM or ATSC (8VSB) -by firmware Standard: QAM , DVB-C , ATSC Bandwidth: 6M, 7M, 8M Constellation: QPSK, 16QAM, 64QAM Code Rate: 1/2, 2/3, 3/4, 5/6, 7/8 Guard Interval: 1/32, 1/16, 1/8, 1/4 Transmission Mode: 2K, 8K MER: >42dB RF Frequency: 30~960MHz, 1KHz step RF Out: 1*or 2 QAM or ATSC carriers combined output (optional) RF Output Level: -30~-10dbm (77~97 DVUV) 0.1db step Modulator Specifications DVB-C Standard: J.83A(DVB-C) J.83B, J.83C MER: >43dB RF Frequency: 30~960MHz, 1KHz step RF Output Level: -30~-10dbm (77~97 DVUV) 0.1db step Symbol Rate: 5.000~9.000Msps adjustable RF Out: 1*QAM, ATSC or 2 *QAM, ATSC Constellation: J.83A J.83B J.83C 16/32/64/128/256QAM 64/256QAM 64/256QAM Bandwidth: 8M, 6M, 6M ATSC Standard: ATSC A/53 MER: >42db Constellation: 8VSB System Local Interface: LCD + control buttons Remote Management: Web NMS Stream Out: 2 ASI out (BNC type); IP(MPTS/SPTS) out (RJ45, 100M) NMS Interface: RJ45, 100M Language: English General Power Supply: AC 100V~240V Dimensions: 482*300*44mm Weight: 3.5kg Operation Temperature: 0~45 C Sales@thorfiber.com Tel: 1 (800) 521-THOR NEW!!! 2 YPbPr QAM IP OR 4 YPbPr QAM IP Models H-2YPbPr-QAM-IP - 2 YPbPr / 2 CVBS /2 S-Video to QAM and IP H-4YPbPr-QAM-IP - 4 YPbPr / 4 CVBS /4 S-Video to QAM and IP H-2YPbPr-ATSC-IP - 2 YPbPr / 2 CVBS /2 S-Video to ATSC and IP H-4YPbPr-ATSC-IP - 4 YPbPr / 4 CVBS /4 S-Video to ATSCand IP