Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Quality columns
and millwork
Subject Page
Fiberglass
iberglass columns from Crown Column & Millwork are a satisfying
combination of modern-day technology and low maintenance care. Each column shaft is
produced with the lower one third straight and the upper two thirds tapered, creating a
correct architectural entasis. Entasis, attributed to ancient Greek architecture, is the
slight convex curving of the column shaft resulting in a most pleasing appearance.
Fiberglass columns are available in plain and fluted shafts. Our fluted round columns
are cast fluted, resulting in a crisp, deep and architecturally correct Ionic flute. Fluted
columns are available in a wide range of sizes from 6” through 16” diameter. The columns
Non-tapered are a composition of cast glass-reinforced polymers with exceptional strength and durability.
Fiberglass Priming and painting with an oil-based or latex coating is all that is necessary after
Column with installation. They exceed requirements for flame spread and smoke density (SDA) and
Contemporary
Capital & each has a NFPA class A rating and BOCA Type I rating for flame spread and
Base smoke development.
Molding Non-tapered plain cast columns are available in 8”, 10”, 12” and 14” diameters up
to 16’ in length. All Crown fiberglass columns come with a limited lifetime warranty
for material and workmanship when properly installed. B
Page Four
Fiberglass Column Collection --- Filament Wound
Fiberglass
includes 14” up to 30” diameters (custom sizes are
also available). The filament wound column defines
easy installation. This lightweight yet strong and
durable product is the best choice for exterior projects
which call for large columns. The winding process
of the column allows for a high concentration of
fiberglass and a lower concentration of resins. The
high content of fiberglass gives this product the
durability and strength required of large exterior
columns. Eliminating the need for a crane to install
this column also makes it an ideal selection.
N
FILAMENT WOUND DIMENSIONS
I
Bottom Neck Above
Size Dia. Dia. Bead Bead Lengths
A B N I
14" 14" 12" 6 5/8" 1 3/8" 16’
16" 16" 131/2" 7 5/8" 1 11/16" 8’9’10’12’14’16’18’20’
18" 18" 15" 8 1/2" 2" 12’14’16’18’20’
20" 20" 17" 9 3/8" 2 1/8" 18’20’22’24’
22" 22" 18 1/2" 10 1/4" 2 1/8" 18’20’22’24’
24" 24" 20" 11 3/8" 2 19/16" 18’20’22’24’26’
30" 30" 25" 14 1/8" 3 1/8" 20’22’24’
A
b c d
Page Five
Fiberglass Column Collection---Square Columns
Fiberglass
more traditional round columns. Crown’s plain square
fiberglass columns are made from specially formulated
glass-reinforced polymers with a one-piece shaft
and applied astragal with an attractive capital and
base molding. Crown’s square fiberglass column is
both lightweight and strong, resulting in a column
that is easy to handle, water-resistant and impervious
to moisture-related problems.
Fluted square fiberglass columns are also available
and are produced by the same process as fiberglass
round columns with glass-reinforced polymers. The
astragal is cast on the column; the flutes are crisp, deep
and architecturally correct. Typical options for any
fiberglass column include: cutting at the bead, cutting
to overall length, splitting, and tabbing for reassembly.
B
E
i f g h D
C
Page Six
Fiberglass Column Collection --- Synthetic Capitals & Bases
Cap& Base
rown fiberglass columns come standard with
a Tuscan capital and base molding and are made
from materials that are water resistant, rot resistant
and impervious to insect infestation. Optional design
styles include the Attic base molding, the Roman
Doric captial and base molding and Contemporary
caps and bases for non-tapered fiberglass columns.
For the more traditional installations, Crown
offers a full range of decorative capitals that can be
viewed on page fourteen of this literature piece.
CONTEMPORARY
SPECIFICATIONS FOR TUSCAN CAPITAL & BASE TUSCAN ROUND
BASE CAPITAL ASTRAGAL E
F
Size Plinth Molding Square Round C
G
C D E F G H I H
Fiberglass Cast SPECIFICATIONS FOR
6" 8 1/4" 1 1/2" 1 3/4" 7 1/8" 1 1/8" 5
/8" * CONTEMPORARY CAPITAL & BASE
8" 10 1/4" 1 7/8" 2 3/8" 9 9/16" 1 3/8" 1" 1" E BASE
10" 12 7/8" 2 3/8" 2 7/8" 11 7/8" 1 3/4" 1 1/4" 1" D Size Molding
C C E
12" 15 1/4" 2 3/4" 3 1/4" 14 1/2" 2" 1 3/8" 1"
Fiberglass Cast
14" 18 3/4" 3 3/8" 4" 17 1/4" 2 3/8" 1 5/8"
8" 10 3/4" 3 1/ 4"
16" 21 1/2" 3 7/8" 4 1/2" 19 1/4" 2 3/4" 1 7/8" TUSCAN SQUARE 10" 13 3/8" 3 7/8"
18" 24 1/4" 4 1/4" 5 3/8" 21 3/8" 3" 2" F 12" 16 1/8" 4 1/2"
Filament Wound G 14" 18 3/4" 5 3/8"
14" 18 3/4" 3
3 /8" 4" 1
17 /8" 3
2 /8" 5
1 / 8" H
16" 21 1/2" 3 7/8" 4 1/2" 19 1/4" 2 3/4" 1 7/8"
18" 24 1/4" 4 1/4" 5 3/8" 21 1/2" 3" 2 1/8" I
ATTIC BASE
20" 27" 4 3/4" 6" 24 1/4" 3 3/8" 2 1/4"
22" 29 3/4" 5 1/4" 6 7/8" 26 1/2" 3 3/4" 2 1/2" E
E
24" 32 1/2" 5 3/4" 7 1/2" 28 3/4" 4 1/8" 2 3/4" D
30" 40 1/2" 7 1/4" 9 1/4" 35 3/4" 5 1/8" 3 1/2" C D
C
SPECIFICATIONS FOR ROMAN DORIC CAPITAL & BASE SPECIFICATIONS FOR ATTIC BASE
BASE CAPITAL BASE
Size Plinth Molding Square Round Size Plinth Molding
C D E F G H C D E
ROMAN DORIC Fiberglass Cast
Fiberglass Cast
6" 8 1/2" 1 1/2" 2 7/16"
6" 8 1/4" 1 /2" 1 3
1 /4" 1
7 /8" 1
1 /8" 5
/8" F
8" 10 3/4" 1 7/8" 3 1/4"
8" 10 3/8" 1 1/8" 2 7/16" 9 3/4" 1 7/16" 1 1/16" G
H 10" 13 3/8" 2 3/8" 3 7/8"
10" 12 15/16" 2 5/16" 3 1/8" 12 5/16" 1 3/4" 1 9/16"
12" 16 1/8" 2 3/4" 4 1/2"
12" 15 3/16" 2 3/4" 3 1/2" 14 3/4" 2 3/16" 1 1/2"
14" 18 3/4" 3 3/8" 5 3/8"
14" 18 11/16" 3 3/8" 4 1/16" 17 1/2" 2 5/16" 2 1/16"
E 16" 21 1/2" 3 7/8" 6 1/4"
16" 21 1/2" 3 7/8" 4 7/8" 19 7/8" 2 5/8" 2 1/16"
D 18" 24 1/4" 4 1/4" 7 1/8"
18" 24 3/8" 4 1/4" 5 3/4" 22 1/4" 3 1/8" 2 1/4"
C Filament Wound
Filament Wound
14" 18 3/4" 3 3/8" 5 3/8"
14" 18 11/16" 3 3/8" 4 1/16" 17 1/2" 2 5/16" 2 1/16"
16" 21 1/2" 3 7/8" 6 1/4"
16" 21 1/2" 3 7/8" 4 7/8" 19 7/8" 2 5/8" 2 1/16"
18" 24 1/4" 4 1/4" 7 1/8"
18" 24 3/8" 4 1/4" 5 3/4" 22 1/4" 3 1/8" 2 1/4"
20" 27" 4 3/4" 8 1/8"
20" 27" 4 3/4" 6 1/4" 25" 4" 2 3/4"
22" 29 3/4" 5 1/4" 9"
22" 29 3/4" 5 1/4" 6 3/4" 27 3/8" 4 3/8" 3"
24" 32 1/2" 5 3/4" 9 15/16"
24" 32 1/2" 5 3/4" 7 1/2" 29 3/4" 4 1/2" 3 1/4"
30" 40 1/2" 7 1/4" 12"
30" 40 1/2" 7 1/4" 9 3/8" 37" 5 7/8" 4 1/2 "
Page Seven
Colonial & Authentic Wood Column Collection
Stock Wood
choice in our stock wood column collection. The
Colonial column is available both plain and fluted
and is manufactured with a double bead molding.
The Colonial column has a gradual straight taper.
The Authentic wood column is also available
plain or fluted and has a double taper approximately
one foot below the top of the shaft. The exaggerated
taper gives the authentic column a distinctive
appearance at the neck molding of the shaft.
Typical options for wood columns include: cutting
at the bead, cutting to overall length, altering flute
length, prime one coat, prime/sand/prime, application
of asphaltum, splitting, and splining for reassembly.
Tuscan
Capital J
Page Eight
A
Non-Tapered Wood Column Collection -- Round & Square
COLUMNS TO SURROUND
Non-Tapered Wood
STRUCTURAL SUPPORTS
T hese stock round wood columns are not tapered and
are available in plain or fluted styles. They can be pro- Size
Maximum Maximum
Round
Support
Square
Support
SQUARE
B
SQUARE DIMENSIONS SURROUND STRUCTURAL SUPPORT
Maximum Maximum
Bottom Top Flute No. Size Net Wall Square Round
Size Width Width Width Flutes Lengths Width Thickness Support Support
A B L
L
6" 5 1/4" 5 1/4" 5
/8" 4 8’10’ 6" 5 1/4" 5
/ 8" 4" 1 1/8"
8" 7 1/4" 7 1/4" 3
/4" 5 8’10’ 8" 7 1/4" 5
/ 8" 6" 3 1/4"
10" 9 1/4" 9 1/4" 13
/16" 6 8’10’12’ 10" 1
9 /4" 1" 1
7 /4" 5 1/4"
12" 11 1/4" 11 1/4" 7
/8" 7 8’10’12’ 12" 1
11 /4" 1" 1
9 /4" 7 1/4"
A
Page Nine
Classic Wood Column Collection
Classic Wood
C rown’s Classic wood column is an upgraded
selection to the Colonial and Authentic styles.
Available with a plain or fluted shaft, the Classic
column is manufactured with a one-third straight,
two-third radius taper (correct entasis). The bead
detail is more sophisticated and has an architectural
attractiveness.
Every column shaft is made with finger-jointed
staves for added strength and stability. The staves
are joined using tongue and groove joints with Type
I exterior glues and each shaft is treated with a
wood preservative. All sizes for wood columns
include the standard Tuscan capital, column shaft
and Tuscan base and plinth.
CLASSIC DIMENSIONS
Bottom Neck Above Flute Above Below No. CLASSIC
Size Dia. Dia. Bead Bead Width Flute Flute Flutes Lengths B
A B M I L K J M
I
6" 5 /"1
2
3
4 /" 4
1
3 /" 8
3
1 /" 8
3
/" 4
1
3 /" 2 10 / "3
4 12 8’9’10’ K
8" 7 1/4" 6 1/4" 3 1/8" 1 3/8" 15
/16" 3 1/2" 10 3/4" 16 8’9’10’12’
10" 9 1/4" 8" 3 1/8" 1 3/8" 15
/16" 3 1/2" 10 3/4" 20 8’9’10’12’14’16’
12" 11 1/4" 9 1/4" 3 1/8" 1 3/8" 15
/16" 3 1/2" 10 3/4" 24 8’9’10’12’14’16’18’ L
14" 13 5/8" 12" * 1 3/8" 1 1/8" 2 3/4" 5" 24 8’9’10’12’14’16’18’20’
16" 15 5/8" 13 1/2" * 1 3/8" 1 1/4" 2 3/4" 5" 24 8’9’10’12’14’16’18’20’
18" 17 5/8" 15" * 1 3/8" 1 1/2" 2 3/4" 5" 24 8’9’10’12’14’16’18’20’22’
20" 19 5/8" 17" * 1 3/8" 1 5/8" 2 3/4" 5" 24 12’14’16’18’20’22’24’ J
22" 21 5/8" 18 1/2" * 1 3/8" 1 3/4" 2 3/4" 5" 24 12’14’16’18’20’22’24’
24" 23 5/8" 20" * 1 3/8" 1 7/8" 2 3/4" 5" 24 12’14’16’18’20’22’24’ A
b c d
Page Ten
Wood Column Collection---Synthetic Capitals & Bases
Capital&Base
C rown stock wood columns come standard
with a Tuscan capital and base molding and
are made from a material that is water resistant,
rot resistant and impervious to insect infestation.
Optional design styles include the Attic base
molding and the Roman Doric base molding.
Decorative capitals of various styles are available
for all sizes of our wood columns and can be viewed
on page fourteen of this literature piece.
E E
ROMAN DORIC ATTIC BASE
BASE D D
C C
Hardwood Classic
H ARDWOOD CLASSIC COLUMNS
A quality stain grade column manufactured from select hardwoods such as Red Oak, Cherry,
Maple and Mahogany. Used for interior applications, this column incorporates a tapered shaft
with a true architectural entasis and a classic style bead.
Hardwood classic columns are available either plain or fluted in sizes 8”x8’ through
12”x12’. Time honored craftsmanship and attention to detail set Crown hardwood classic
columns apart as the standard for elegance and beauty.
CLASSIC
B
HARDWOOD CLASSIC DIMENSIONS SIZES M
Shaft Wt. I
Bottom Neck Above Flute Above Below No. Size (lbs) K
Size Dia. Dia. Bead Bead Width Flute Flute Flutes
A B M I L K J 8" x 8' 33
8" x 10' 45
L
8" 7 1/4" 6 1/4" 3 1/8" 1 3/8" 15
/16" 3 1/2" 10 3/4" 16 8" x 12' 49
10" 9 1/4" 8" 3 1/8" 1 3/8" 15
/16" 3 1/2" 10 3/4" 20 10" x 8' 46
12" 11 1/4" 9 1/4" 3 1/8" 1 3/8" 15
/16" 3 1/2" 10 3/4" 24 10" x 10' 54
10" x 12' 56
12" x 8' 46 J
12" x 10' 64
See specifications for tapered Tuscan Capital & Base on page Eleven
12" x 12' 76
A
Page Twelve
Hardwood Mantle Column Collection
Hardwood Mantle
ARDWOOD MANTLE COLUMNS
A quality stain grade column used in mantle
applications and manufactured from select hardwoods
such as Red Oak, Cherry, Maple and Poplar. This
column incorporates either a tapered shaft with a true
architectural entasis or a non-tapered shaft for a
contemporary appearance. The classic hardwood
column may be purchased with or without a bead
molding, and is available in both a plain or fluted
shaft.
A Crown mantle column is the essential component
in providing natural beauty and pleasing charm to
any mantle installation.
MANTLE
MANTLE COLUMN DIMENSIONS
B
Bottom Neck Above Flute Top Bottom No. M
Size Dia. Dia. Bead Bead Width Flute Flute Flute Length I
K
A B M I L K J
TAPERED
3 1/2" 3" 2 13/16" 1 1/4" 5
/16" 7
/16" 5
/16" 1
/2" 12 52” L
5" 4 1/2" 3 7/8" 1 1/4" 5
/16" 7
/16" 5
/16" 1
/2" 20 52”
NON-TAPERED
3 1/2" 3" 3 3/8" 1 1/4" 5
/16" 7
/16" 5
/16" 1
/2" 12 52”
5" 4 1/2" 4 7/8" 1 1/4" 5
/16" 7
/16" 5
/16" 1
/2" 12 52” J
TAPERED
3 1/ 2 " 5" 1" 1 1/4" 4 1/2" 1 1/8" 5
/8" E
5" 6 1/2" 1" 1 1/4" 4 1/2" 1 1/8" 5
/8" D
NON-TAPERED C
3 1/2" 5" 1" 1 1/4" 5" 1 1/8" 5
/8"
5" 6 1/2" 1" 1 1/4" 6 1/2" 1 1/8" 5
/8"
Page Thirteen
Decorative Capitals--Fiberglass & Wood Columns
Decorative Capitals
C rown Column & Millwork offers an infinite
selection of specialty items such as decorative capitals,
from a composite mold of marble & polyestor resin.
They can be mounted on either plain or fluted columns
for interior or exterior use. These capitals are true to
their original inspirations and when combined
with todays advanced material technology and
construction methods they form a truely unique product.
STOCK ROUND
WOOD
Authentic,Colonial,
Non-tapered or
Classic
Size
6”
8”
10”
12”
14”
16”
18”
20”
22”
24”
ROUND
Empire Empire with Necking Greek Angular Ionic FIBERGLASS
Fiberglass Cast
Size
6”
8”
10”
12”
14”
16”
18”
Filament Wound
Greek Erectheum Greek Erectheum with Modern Composite 14”
Necking 16”
18”
20”
22”
24”
Page Fourteen
Composite Porch Post Collection
Composite Posts
C rown’s composite porch posts combine the
latest in materials and technology to provide a low
maintenance product with exceptional detail. The
composite post is load bearing, easy to install, and
backed by a limited lifetime warranty.
The composition of this innovative product is
comprised of a fiberglass outer shell and a center core
of galvanized steel encapsulated with polyurethane
foam. The composite porch post has an immaculate
semi-gloss finish. Painting is not required, however,
if painting is desired a latex or oil-based paint may
be used.
Each post is packaged with two mounting plates
and installation instructions. Fastening kits are also
available and are sold separately.
Page Fifteen
Wood Porch Post Collection
Porch Posts
C rown’s wood porch and lamp posts add a
distinctive touch to any style home. Porch posts are
often used as supporting elements for porches.
Combined with balusters, hand and shoe rail, and
decorative millwork, porch posts establish the popular
Victorian style.
Crown’s wood porch posts are constructed of select
softwoods, laminated and finger-jointed for greater
strength and stability. The wood porch posts are
available in a variety of sizes and styles.
Cast aluminum plinths are an available option
for providing proper ventilation at the bottom of the
post. Elevating and ventilating the porch post
provides protection from moisture absorption. Uplift
kits are also available.
Stair Parts
O ur Softwood Stair Part Collection offers a wide
range of design flexibility while offering a classic addition to
3 1/4" Colonial
1 1/4"
Handrail
your home. Our hemlock stair parts are manufactured under
2 1/2"
2" x 6'
highly controlled standards for beauty that will last a 2" x 8'
2 1/2" 2" x 16'
lifetime. All parts are made without the use of finger-joints 3" x 6'
1 1/4" 3" x 8'
and will enhance the appearance of any interior application. 3" x 16'
1/4"
1 5/8"
Page Seventeen
Architectural Column Collection
Architectural
t Crown, our attention to detail and devotion to the classical orders are
absolute. Because our standards are exacting, we produce columns certain to
meet your individual needs, regardless of the shape, size, design, or species
of wood that you require. We closely control the quality and preciseness of
entasis, projections and profiles as our master craftsmen make each
architectural column to your custom specifications.
Through our extensive lumber sources, Crown carries virtually every type
of wood, be it a standard exterior such as Western Red Cedar and Clear
All-Heart Redwood, or an interior paint grade such as finger-jointed pine
or poplar. Crown uses only the best kiln-dried lumber available. Exotic
hardwoods such as teak, mahogany, cherry, walnut and other highly
sought after species are available in unlimited designs.
Premium finishing services are included in the pricing of our custom-made
architectural products. This includes two or
three coats of primer to prepare the surface for
Ionic
Fluted painting at the job site. We precisely trim
Column each end of the shaft and apply an exterior
with Roman treatment of asphaltum paint inside the entire
Corinthian length of the shaft. We also construct heavy
Capital
custom wooden crates to ensure safe transit.
Page Eighteen
Architectural Column Collection
8" 6 1/2" 10 3/4" 1 7/8" 2 3/8" 9 3/8" 1 3/8" 1" 1 5/8" 1"
Design 100P(Plain)
8"
100F(Fluted)
10" 8 1/2" 13 3/8" 2 3/8" 2 7/8" 12 1/8" 1 3/4" 1 1/4" 2 1/16" 1 1/4" Cap: TUSCAN
12"
12" 10"
10" 16
16 1/8"
1/8" 22 3/4"
3/4" 33 1/4"
1/4" 14
14 3/8"
3/8" 2"
2" 11 3/8"
3/8" 22 1/2"
1/2" 11 3/8"
3/8"
Base: TUSCAN
14" 12" 18 3/4" 3 3/8" 4" 17 1/8" 2 3/8" 1 5/8" 2 7/8" 1 1/2"
16" 13 1/2" 21 1/2" 3 7/8" 4 1/2" 19 1/4" 2 3/4" 1 7/8" 3 3/8" 2"
18" 15" 24 1/4" 4 1/4" 5 3/8" 21 1/2" 3" 2 1/8" 3 3/4" 2 1/8"
20" 17" 27" 4 3/4" 6" 24 1/4" 3 3/8" 2 1/4" 4 1/8" 2 1/4"
22" 18 1/2" 29 3/4" 5 1/4" 6 7/8" 26 1/2" 3 3/4" 2 1/2" 4 1/2" 2 1/2"
24" 20" 32 1/2" 5 3/4" 7 1/2" 28 3/4" 4 1/8" 2 3/4" 5" 2 5/8"
26" 22" 35" 6 1/4" 8 3/8" 31 1/2" 4 3/8" 3" 5 3/8" 2 7/8"
28" 23 1/2" 38" 6 3/4" 8 3/4" 33 3/8" 4 3/4" 3 1/4" 5 7/8" 3"
30" 25" 40 1/2" 7 1/4" 9 1/4" 35 3/4" 5 1/8" 3 1/2" 6 1/4" 3 1/2"
32" 27" 43 3/8" 7 3/4" 10" 37 5/8" 5 1/2" 3 3/4" 6 5/8" 3 5/8"
34" 28 1/2" 46" 8 1/4" 10 7/8" 41" 5 3/4" 3 7/8" 7 1/8" 3 3/4"
36"
36" 30"
30" 48 3/4"
48 3/4" 88 3/4"
3/4" 11 3/8"
11 3/8" 42 3/4"
42 3/4" 66 1/4"
1/4" 44 1/4"
1/4" 77 1/2"
1/2" 4"
4"
Architectural
Shaft Shaft Square Round Square
Bottom Top Cap Cap Neck Cap
Diameter Diameter Height Height Height Width
A B C D E F
32"
32" 26"
26" 55 5/8"
5/8" 66 9/16"
9/16" 22 1/4"
1/4" 36 3/4"
36 3/4"
Page Ninteen
Architectural Column Collection
8"
8" 66 1/2"
1/2" 10
10 3/4"
3/4" 11 7/8"
7/8" 22 3/8"
3/8" 99 3/4"
3/4" 11 1/2"
1/2" 11 1/8"
1/8" 11 5/8"
5/8" 1"
1" Design 300P(Plain)
10" 8 1/2" 13 3/8" 2 3/8" 3" 12 1/2" 1 3/4" 1 3/8" 2 1/16" 1 1/4"
300F(Fluted)
Cap: ROMAN DORIC
12"
12" 10"
10" 16
16 1/8"
1/8" 22 3/4"
3/4" 33 7/16"
7/16" 14
14 3/4"
3/4" 22 3/8"
3/8" 11 5/8"
5/8" 22 1/2"
1/2" 11 3/8"
3/8" Base: ROMAN DORIC
14" 12" 18 3/4" 3 3/8" 4" 17 1/2" 2 3/4" 2" 2 7/8" 1 1/2"
16" 13 1/2" 21 1/2" 3 7/8" 4 7/8" 19 7/8" 3 1/8" 2 1/4" 3 3/8" 2"
18" 15" 24 1/4" 4 1/4" 5 5/8" 22 1/4" 3 1/2" 2 1/2" 3 3/4" 2 1/8"
20" 17" 27" 4 3/4" 6 1/4" 25" 4" 2 3/4" 4 1/8" 2 1/4"
22" 18 1/2" 29 3/4" 5 1/4" 6 3/4" 27 3/8" 4 3/8" 3" 4 1/2" 2 1/2"
24" 20" 32 1/2" 5 3/4" 7 1/2" 29 3/4" 4 1/2" 3 1/4" 5" 2 5/8"
26" 22" 35" 6 1/4" 8 1/8" 32 1/2" 5 1/8" 3 1/2" 5 3/8" 2 7/8"
28" 23 1/2" 38" 6 3/4" 8 5/8" 34 5/8" 5 1/2" 3 7/8" 5 7/8" 3"
30" 25" 40 1/2" 7 1/4" 9 3/8" 37" 5 7/8" 4 1/8" 6 1/4" 3 1/2"
32" 27" 43 3/8" 7 3/4" 10" 39 1/4" 6 1/4" 4 1/4" 6 5/8" 3 5/8"
34" 28 1/2" 46" 8 1/4" 10 3/4" 42 1/8" 6 5/8" 4 5/8" 7 1/8" 3 3/4"
36"
36" 30"
30" 48
48 3/4"
3/4" 88 3/4"
3/4" 11
11 1/4"
1/4" 44
44 1/8"
1/8" 7"
7" 5"
5" 77 1/2"
1/2" 4"
4"
8" 6 1/2" 10 3/4" 1 7/8" 3 1/4" 9 3/4" 1 1/2" 1 1/8" 1 5/8" 1"
Design 400P(Plain)
8"
400F(Fluted)
10" 8 1/2" 13 3/8" 2 3/8" 3 7/8" 12 1/2" 1 3/4" 1 3/8" 2 1/16" 1 1/4" Cap: ROMAN DORIC
12" 10" 16 1/8" 2 3/4" 4 1/2" 14 3/4" 2 3/8" 1 5/8" 2 1/2" 1 3/8" Base: ATTIC
14" 12" 18 3/4" 3 3/8" 5 3/8" 17 1/2" 2 3/4" 2" 2 7/8" 1 1/2"
16" 13 1/2" 21 1/2" 3 7/8" 6 1/4" 19 7/8" 3 1/8" 2 1/4" 3 3/8" 2"
18" 15" 24 1/4" 4 1/4" 7 1/8" 22 1/4" 3 1/2" 2 1/2" 3 3/4" 2 1/8"
20" 17" 27" 4 3/4" 8 1/8" 25" 4" 2 3/4" 4 1/8" 2 1/4"
22" 18 1/2" 29 3/4" 5 1/4" 9" 27 3/8" 4 3/8" 3" 4 1/2" 2 1/2"
24" 20" 32 1/2" 5 3/4" 9 15/16" 29 3/4" 4 1/2" 3 1/4" 5" 2 5/8"
26" 22" 35" 6 1/4" 10 5/8" 32 1/2" 5 1/8" 3 1/2" 5 3/8" 2 7/8"
28" 23 1/2" 38" 6 3/4" 11 3/8" 34 5/8" 5 1/2" 3 7/8" 5 7/8" 3"
30" 25" 40 1/2" 7 1/4" 12" 37" 5 7/8" 4 1/8" 6 1/4" 3 1/2"
32"
32" 27"
27" 43
43 3/8"
3/8" 77 3/4"
3/4" 13
13 1/8"
1/8" 39
39 1/4"
1/4" 66 1/4"
1/4" 44 1/4"
1/4" 66 5/8"
5/8" 33 5/8"
5/8"
34" 28 1/2" 46" 8 1/4" 14" 42 1/8" 6 5/8" 4 5/8" 7 1/8" 3 3/4"
36"
36" 30"
30" 48
48 3/4"
3/4" 88 3/4"
3/4" 14
14 3/4"
3/4" 44
44 1/8"
1/8" 7"
7" 5"
5" 77 1/2"
1/2" 4"
4"
Page Twenty
Architectural Column Collection -- Decorative Capitals
To be To be To be
Used Capital Used Capital Used Capital
With Diameter Height Abacus With Diameter Height Abacus With Diameter Height Abacus
6" 5" 3 1/8" 9" 6" 5" 6 7/8" 9" 6" 4 3/4" 7" 7 1/2"
8" 6 1/2" 7 3/4" 10" 8" 6 1/2" 7 3/4" 10" 8" 6" 8 1/4" 10 5/8"
10" 8 1/2" 5 1/4" 13 1/2" 10" 8 1/2" 10 1/4" 13 1/2" 10" 8" 10 1/2" 16"
12" 10 1/4" 6 1/4" 18" 12" 10 1/4" 11" 18" 12" 9" 12" 18"
14" 12 1/2" 7 1/4" 20 1/2" 14" 12 1/2" 14 1/2" 20 1/2" 14" 12" 17" 19 3/4"
16" 14" 8 3/4" 23" 16" 14" 17" 23" 16" 13" 17 5/8" 26"
18" 14" 8 3/4" 23" 18" 14" 17" 23" 18" 15 1/2" 20" 29"
To be To be To be
Used Capital Used Capital Used Capital
With Diameter Height Abacus With Diameter Height Abacus With Diameter Height Abacus
6" 5" 3 1/8" 6 7/8" 6" 4 7/8" 4 1/2" 6 1/2" 6” 5" 6 7/8" 7 3/4"
8" 7" 4 1/2" 9 3/8" 8" 6 1/2" 5 3/4" 7 1/2" 8” 6 1/2" 7 1/4" 10 1/4"
10" 9 1/8" 5 5/8" 13 1/8" 10" 8 3/8" 7 3/4" 10 1/2" 10" 8" 10" 13 5/8"
12" 11" 6 1/2" 14 1/4" 12" 10" 9 1/2" 14 1/4" 12" 9 1/2" 11 1/4" 16 1/4"
14" 12 3/4" 7" 16 1/4" 14" 12 3/4" 11 3/8" 16 1/4" 14" 12 " 14" 21 1/4"
16" 15 1/4" 10 1/4" 22" 16" 14 1/2" 13 1/4" 18" 16" 13 1/4" 15 1/8" 22 1/2"
18" 16 1/2" 10" 21 1/4" 18" 15 1/2" 14 7/8" 21 1/2" 18" 15 1/2" 18 1/4" 26"
20" 18" 11 1/8" 26 1/4" 20" 16 1/2" 15 1/8" 21 1/4" 20" 17 1/2" 21 1/2" 28"
22" 20" 11 1/2" 27" 22" 18" 17" 26 1/4" 22" 18" 21 1/2" 27 3/4"
24" 22" 13 1/8" 31" 24" 20" 17 1/2" 27" 24" 19 1/2" 23" 35 3/4"
26" 24" 14" 31 1/2" 26" 24" 22" 31 1/2" 26" 22" 24" 37 1/4"
28" 25" 15" 32 1/2" 28" 25" 24" 32 1/2" 28" 24" 26 1/8" 37 1/4"
To be To be To be
Used Capital Used Capital Used Capital
With Diameter Height Abacus With Diameter Height Abacus With Diameter Height Abacus
6" 4 1/2" 2 3/4" 7 1/2" 6" 4 1/2" 5 1/2" 7 1/2" 6" 4 3/4" 7" 9 3/8"
8" 6 5/8" 4" 9 1/4" 8" 6 5/8" 8" 9 1/4" 8" 6" 8" 11 1/2"
10" 8 1/2" 5 1/2" 14 1/2" 10" 8 1/2" 10 1/8" 14 1/2" 10" 8 3/8" 11" 14"
12" 10 1/2" 6 1/8" 17 1/4" 12" 10 1/2" 11" 17 1/4" 12" 9 1/2" 13 3/4" 19"
14" 12 1/2" 7 1/4" 20 1/2" 14" 12 1/2" 14 3/8" 20 1/2" 14" 12 1/2" 17 1/4" 22 3/4"
16" 14 3/4" 8 3/8" 22 1/2" 18" 14 3/4" 17" 22 1/2" 16" 13" 17 3/8" 27"
18" 16" 9 3/4" 24 1/4" 20" 18" 19" 30" 18" 15" 17 3/4" 25 1/4"
Page Twenty-one
Architectural Column Collection -- Decorative Capitals
To be To be
Used Capital Used Capital
With Diameter Height Abacus With Diameter Height Abacus
S P E C I A LT Y I T E M S
Page Twenty-two
Ordering & Quotation Information
Q U O TAT I O N & O R D E R I N G
INFORMATION
PLAN TYPES
a b c d
f g
e h
h
s
j q
i
Page Twenty-three
An elegant...
distinctive accent
Crown Column & Millwork Co., L.L.C. - P. O. Box 2219 - Gadsden, AL 35903
p.1-888-862-0880 p.256-494-0880 f.256-494-0898 07/03