Temperature: In dependence on material and pressure (see product catalogue) Advantages: For discharge of small subcooled up to high subcooled condensate Automatic air venting during start-up and operation of the plant Installation in every position Integral strainer screen Design without gaskets due to sealing effect of metal contours (PN40, DN15- 25) Simultaneous operation as check valve Replacement of the control unit without removing body from the line Variable adjustment of the subcooling temperature Especially insensitive to water- hammer and frost
Temperature: In dependence on material, pressure and flow medium (see product catalogue) Advantages: Immediate discharge of hot boiling condensate even at significant variation in pressure and condensate load Controller with integral automatic air venting facility Integral non-return protection Optional with connection for pressure compensation line for air return and bypass line Robust, water-hammer resistant float ball Integral large surface strainer screen
Temperature: In dependence on material and pressure (see product catalogue) Advantages: For discharge of small subcooled up to high subcooled condensate Automatic air venting during start-up and operation of the plant Installation in every position Integral strainer screen Design without gaskets due to sealing effect of metal contours (PN40, DN15- 25) Choice of 4 different optimized capsule types - from 5 to max. 40 K subcooling High response sensitivity Exact control characteristic Robust and insensitive to water- hammer
Manifolds for Steam Distribution and Condensate Collection Designs: With flanges, Butt weld ends, Socket weld ends, Screwed sockets With 2 up to 12 secondary connections (additional secondary connections on request) Optional with insulation jacket Optional with primary stop or control valve Condensate collector optional with integral small bore dip pipe Materials: C22.8 (1.0460) X6CrNiTi1810 (1.4541) ASTM A105 Nominal diameter: Primary connection top and bottom - DN 40 or DN 50 Secondary connection left and right - DN 15-25 Nominal pressure: PN 40 Class 300 Medium: Steam, Condensate, Process water, Hot oil
Temperature: In dependence on material and pressure (see product catalogue) Advantages: Applicable as steam distributor or condensate collector Robust compact modular structure with integral stop valve Body and integral stop valve bolted together without gasket, i.e. by metal- to-metal face joint Shock absorbed and noise reduced condensate return for vertical installation by integral small bore dip pipe