(Photograph depicts SF132 with optional circuit breaker)
Product Description
Novaris surge filters are designed for protection against induced transient overvoltages caused by lightning and other events on AC and DC power supply circuits.
Versions are available for voltage ratings up to 240V AC with surge ratings to suit location categories A, B and C including category C high exposure in accordance with AS1768 also IEEE C62.41.
Operation
Multistage transient protection is utilized in every unit. Metal oxide varistor surge arrester modules, as the first stage, absorb the majority of the energy. These components are continuously monitored for integrity with built in LED indicators. For 16kA and 40kA versions DINsafe surge diverters are used. For versions up to 200kA, MULTIMOV surge diverters with digital display of integrity are used. These surge arrester modules are housed in rugged and safe metal cases and are easily replaced should this be required.
The first stage is followed by a low pass LC filter, which further attenuates the let through voltage. The filter also attenuates low-level noise and harmonics.
The third stage consists of metal oxide varistor based surge arrester modules. DINsafe surge diverters are used for all models. These provide a final clamping circuit and protect against impulses generated by the loads connected. This is particularly important when multiple loads are connected. Do not exceed total filter ratings.
In addition to the alarm indicators on each module an external alarm is generated which allows for remote monitoring. This is provided by a clean contact either normally closed or normally open.
An optional surge counter is available. This provides a count of surges diverted and has a sensitivity of 100A for an 8/20us impulse.
Every filter is configured to suit all TN and TT power distribution systems including TN-C-S (MEN).
Specifications
Description Multistage power surge filter No phases: 1 Voltage drop: <2V at full load Efficiency: 99% Protection modes: Transverse and common mode. Protection stages: MOV / low pass filter / MOV Capacitor type: Self-healing polypropylene. Surge withstand: IEEE C62.41 cat. A, B, C AS1768-1991 cat. A, B, C and C-High Surge rating: 16kA to 200kA per line. (8/20us impulse) Frequency response: 3dB point 800Hz. Performance: Typical let through voltage for all models < 2 x mains peak voltage. Indicator: Internal LED / digital display. External alarm: N/O or N/C clean contact. Operating Temperature: 65 C maximum. Dimensions: Backplane: 190H x 230W x 116D Steel cabinet IP55: 400H x 300W x 120D