Sei sulla pagina 1di 30

www.framecad.

com
Fastening Solutions
for Cold Formed Steel Construction


Fastening Solutions
FRAMECAD

Rapid construction fasteners engineered for
speed, durability and performance. Designed to deliver the
most advanced end-to-end steel frame building solution.
FRAMECAD

offers a complete range of quality fasteners as part of the FRAMECAD

Design Build Solution.


The range includes screw fasteners for steel frame Wall Panel and Truss assembly, exterior cladding, interior lining,
roong, ooring and other applications required for construction. All fasteners are designed with 3 main objectives
- speed, durability and performance.
SPEED - All our fastening systems have been selected to optimise the speed and efciency of the FRAMECAD

Design Build Solution. We recommend using collated screws where practical, which reduces labour costs by
making it quicker and easier to x screws consistently. FRAMECAD

has especially developed the X-Drive

to
help business reach optimum production rates.
DURABILITY - Corrosion resistance is a critical part of the performance of just not the fastener, but the entire
FRAMECAD

building system. FRAMECAD



fasteners come with different levels of corrosion resistance to suit a
variety of environmental conditions.
PERFORMANCE - All FRAMECAD

Fasteners have been tested by our technicians and laboratories to ensure they
are compatible with our FRAMECAD

building system and meet relevant international recognised manufacturing
standards. All fasteners are produced by ISO 9001 and ISO 9002 certied manufacturing facilities and have been
tested for shear strength, tensile strength and corrosion resistance.
FRAMECAD

fasteners are complimented by a range of quality fastening tools recommended by our technicians
for use with light gauge steel framing and construction.
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
DESIGN & BUILD SYSTEM
Frame and Truss
pg. 10 - 13
Roong and Metal Siding
pg. 20 - 021
Internal Linings
pg. 19
Flooring
pg. 17 - 18
Wraps and Lining pg. 16
Exterior Cladding
pg. 17 - 18
Anchor Bolts Pg. 22
LGS to Steel Connection pg.
15
Driver Bits pg. 23 Tools pg. 24 & 25 Adhesives pg. 26
Connector and Straps
pg. 14
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
Screw Point Types
Drill Point (DP)
Fasteners with a point capable of drilling into medium to heavy gauge steel . Drill
points are classied as #1 through to #5 with a #5 point being capable of
penetrating thicker gauge metals.
Sharp Point (SP)
For interior linings such as Gypsum. The Sharp Point has an especially sharp point
having multiple threads or Dual Threads occurring within the body portion of the
screw. One of the threads gradually decreases and fades into the tapered portion of
the shank and terminates. The other thread decreases in diameter and fades nearer
the pointed end of the screw. Pre drilled holes are recommended when securing
claddings.
Winged Drill
Point (WDP)
Self drilling point specially designed to enable the fastener to x exterior
claddings such as timber, bre cement and composite boards to metal without the
substrate rising to the top of the screw while the metal is being drilled, and without
the need to pre-drill. The drill point drills the substrate as the wings counter bore
the hole larger than the thread diameter. With the hole being larger, the thread will
not engage into the substrate. After the self drilling point drills through the cladding
substrate, the wings break off upon contact with the metal.
Tri-Lobular
Thread
This thread rolling screw uses a Tri-lobular design to cause the grains of the mating
material to reform to the thread contour rather than be sheared during tapping.
This action causes a stronger t.
Head Types
Flat Head
Low prole head useful for steel framing applications, where the screw must t
ush within the dimple to allow for a smooth nish for cladding or lining
materials over the top.
Wafer Head
Low prole head, especially designed to suit FRAMECAD frames, as the head ts
neatly into the dimple of the frame. The screw ts ush within the dimple to allow
for a smooth nish for cladding or lining materials over the top
Hex Washer Head
(HWH)
High torque head for metal to metal applications, great for frame to frame, frame to
Truss and Truss Assembly connections.
Hex Washer Head
with Neoprene
Washer
Same head type as the Hex Washer Head however on the other side of the built in
washer there is a removable neoprene washer designed to give a waterproof seal
around the fastening and hole. Most commonly used in roong and exterior clad-
ding applications.
Bugle Head
Designed to eliminate paper burrs in gypsum with a secondary ring under the
normal bugle head, this affectively reduces paper burrs for a cleaner nish.
Countersunk
Head
Designed to seat easily into engineered timbers, bre cement and MGO Board for a
smooth nish.
Countersunk
Ribbed
Countersunk head with cutting ribbs on the underside to allow the head to
embed properly into substrates.
Pan Head High torque head for metal to metal applications.
Page 1
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
Drive Types
X Drive
Developed by FRAMECAD

for metal to metal applications. The X-Drive

delivers much
higher torque without the cam out that occurs with a Phillips Drive. It delivers more stabil-
ity when driving screws, minimises wear on driver bits and reduces operator fatigue. The
X-Drive

also offers Bit-Stick without any magnetising.


Phillips Drive
The classic drive, built and designed to cam out preventing the fastener from overdriv-
ing into gypsum or MGO Board. While appropriate in applications such as drywall, is not
always ideal when assembling steel framing.
Square Drive
Four-sided recess. Higher torque than a Phillips Drive which is required when framing LGS
Framing.
Hex Drive
A Hex screw head with high torque is ideal for metal to metal applications. The large
extruding Hex gives additional head strength and allows for more torque and stability
making it easier to drive. Due to the size of the head, it cant be used in applications where
other products need to go on top of it. For water tight sealing use a bonded washer.
Torx Drive
Torx heads Screws are designed to prevent cam-out. Better torque-limiting automatic
screwdrivers for use in factories. Rather than rely on the tool slipping out of the screw
head when a torque level is reached, thereby risking damage to the driver tip, screw head
and/or workpiece, the driver design achieves a desired torque consistently. Increased tool
bit life.
0
5
10
15
20
25
Phillips #2 Square #2 Torx X-Driver
Ultimate Torsional Strength Test (Nm)
U
l
t
i
m
a
t
e

T
o
r
q
u
e

(
N
m
)
X Driver

Torx
Square Phillips
5
25
20
15
10
Page 2
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
10g
Screw
Gauge
18
Threads
per inch
(TPI)
18
Tip Type
1000
Corrosion
Resistance
(Salt Spray
Test)
Collated
Packing
Type
X-Drive
Drive
Type
Flat
Head
Type
19
Screw
Length
-
X , , , , ,
Screw Measurements
e.g. 10g - 18 x 19mm, Flat, X#1, PP, 1000hrs, Collated
The length is measured from the underside of the
head to
the end of the point:
Hexagonal Head Screws (HWH)
Wafer Head Screws
Button Head Screws
Pan Head Screws
The length is measured from the top of the head to
the end
of the point:
Bugle Head Screws
Self embedding Head Screws
Countersunk Screws (CSK)
Fastening to Metal
For Successful connection the screw must be of sufcient
length to ensure at least 3 threads are protruding through
the fastened material and the drill point length must be greater
than the total thickness of the metal being fastened into.
Total
thickness
Drill Point
Length
Minimum 3
Threads
The fastener length is dened as the total length of penetration.
Page 3
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
Pull-out Resistance
The amount of force to pull a fastener out of a specied thickness of wood or steel.
Shear Strength
Measure of the force that when applied at a right angle, will break a fastener.
Ultimate Load
A load that during a controlled test, produced complete failure of the fastener.
Axial Tensile
Strength
The Tensile load (kN)
required to break the
screw.
Shear Load
The Shear Load (kN)
required to break the
screw.
Torsional
Strength
The Torque (kN)
required to break the
screw.
Note: For fasteners Axial Tension, Shear and Tensile Loads, Breaking Torque and Torsional strengths please refer
to individual screw data sheets.
Page 4
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
How a Winged Drill Point (WDP) Works
Winged drill points are screws with 2 wing like tabs located just above the drill point. When xing claddings, such
as bre cement board or engineered timers to steel that is 0.75mm or thicker it is important to use a screw that has wings.
The wings create a clearance hole removing the requirement to pre drill holes. The clearance hole maintains the screw rotation
speed and allows the drill tip to penetrate the steel quickly with-out jacking (lifting) and potentially weakening or cracking
the board.
Substrate
Clearance hole as a
result of wings
Wings break off
when contact
with LGS made
LGS Steel
Installation guidelines
Driver speed recommended 0- 4000 RPM
Driving too slowly may result in failure of wings to break off.
Page 5
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
Screw Gauge
Screw gauge is determined by the basic size of the thread outside diameter.
Gauge Diameter Approximate
Inches
Gauge Diameter Approximate
Inches
2g 2.25mm 3/32 10g 4.8mm 3/16
4g 2.85mm 7/64 12g 5.5mm 7/32
5g 3.3mm 1/8 14g 6.3mm 1/4
6g 3.5mm 9/64 16g 6.8mm 0.268
8g 4.2mm 11/64 18g 7.5mm 0.294
Metric Screw Size Nominal Screw Diameter
M5 5mm
M6 6mm
M8 8mm
TPI ( Threads per inch)
The T.P.I ( Threads per inch) is the number of thread crests that can be counted along a lineal measurement of 1 or (25.4mm).
1 or 25.4mm
Page 6
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
When selecting fasteners, you need to balance economics with the environmental conditions and lifetime expec-
tancy. The FRAMECAD

screw range is available in different grades of protective coatings to suit a wide range of
environmental conditions.
Corrosion can be caused by industrial pollution, moisture or salt spray in coastal environments or sand with mois-
ture in desert environments. Even if a screw is used for internal applications, it may be exposed to a corrosive
environment during the construction process. Some internal fasteners are exposed to moisture over their service
life in applications such as bathrooms and other wet areas. It is also important to consider ease of access, as
maintenance or repairs to fasteners may be impossible once the construction of the building in completed.
The table below is a guide to the corrosion resistance required for different building applications.
Corrosion Resistance Recommendations and Comparisons
Applications Environmental
Category
(ISO 9223)
Coating Class
(AS
3566.2:2002)
Salt Spray Test
(SST) - Hours
Approximate
Kesternich
Cycles
Interior linings, Steel framing and roof
trusses (inland and mild environments).
24-48 0
External cladding, steel framing and
roof trusses (coastal and aggressive
environments).
2 & 3 3 1000 10
Roong 4 & 5 4 & 5 2000 15 TO 20
Corrosion Testing Methods
Salt Spray Test (SST)
A common testing method to determine the corrosion
resistance of plating and nishes. Fasteners and materi-
als to be tested are placed in a fog chamber and with
an atmospheric mixture of water and sodium chloride
that is maintained at 100% humidity. The test results are
expressed in hours of expose without evidence of normal
corrosion.
Tests are conducted in accordance to ASTMB117.
Kesternich Test
A corrosion resistance of materials and fasteners which
involves repeated condensation and drying cycles.
Fasteners are submitted to 18 to 28 degrees and 75%
humidity for 16 hours, after being exposed to a con-
tained sulfur dioxide atmosphere at 40 degrees and
100% humidity for 8 hours. The results are measured
in the number of cycles of exposure completed without
evidence of normal corrosion.
Page 7
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
E-Coat - Corrosion Resistance
E-coat is the latest generation in screw coating / corrosion resistance technology and addresses many of the issues
associated with standard coatings such as recess ll and abrasion.
E-Coat Advantages:
No recess ll enabling more torque transmission due to higher driver engagement.
A thinner lm build, which doesnt clog threads and allows screws to be driven with less effort.
1000hrs + SST corrosion protection.
Scratch and chip resistant increasing service life as the protective coating is much less likely to be damaged
during installation.
Environmentally friendly application method.
Corrosion Resistance Recommendations and Comparisons
Applications
Environmental
Category
(ISO 9223)
Coating Class
(AS
3566.2:2002)
Salt Spray
Test
(SST) -
Hours
Approximate
Kesternich
Cycles
Interior linings, Steel framing and roof
trusses (inland and mild environments).
24-48 0
External cladding, steel framing and roof
trusses (coastal and aggressive
environments).
2 & 3 3 1000 10
Roong 4 & 5 4 & 5 2000 15 TO 20
Page 8
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
Environments
Mild Urban/Rural (ISO Category 1-2)
Away from all above environments and corrosive fall-out within 2 kms
Light Industrial/Urban (ISO Category 2-3)
This environment is widespread in industrial/urban areas, away from all
environments listed below, and typically 500m from heavy industrial
fall-out, or where small industries lead to moderate level of fall-out from
small stacks etc.
Industrial (ISO Category 3)
Characterised by fall-out from adjoining severe industrial environments
or where small industries lead to signicant industrial fall-out.
Generally includes other service buildings located near heavy
industrial plants, including out-buildings of the plant itself.
Moderate Marine (ISO Category 3)
Generally between 300m and 1000m from marine surf, although
topography and/or strong prevailing winds may extend this distance.
Characterised by noticeable airborne salt spray, but not visible haze
and salt smell.
Severe Industrial (ISO Category 4)
Characterised by fall-out and emissions from stacks, sulphur and acid
smells. Includes only plant buildings themselves and any building
immediately under stacks. Also includes buildings high internal
humidity and/or corrosion from internal operations.
Severe Marine (ISO Category 4)
Generally between 100m from the beach front and approximately
300m inland. High wind areas may extend this area. Characterised
by strong salt smell, haze, salt smearing and salt build-up in
unwashed areas of structures. Generally a noticeable deterioration of
building materials.
Very Severe Industrial (ISO Category 5)
Characterised by heavy fall-out and emissions from stacks, and strong
sulphur and acid smells. Generally very high rates of corrosion
in most buildings structures evident.
Very Severe Marine (ISO Category 5)
Includes off-shore areas and up to 100m from the high waterline of areas with breaking surf (site
inspection required).
Page 9
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
Wall and Truss Assembly - X-Drive

Framer
Specically engineered to help businesses reach optimum production rates, the FRAMECAD

X-Drive

is
the latest development in screw fastening technology.
Fabrication of steel frame walls and trusses
Pin Point: Designed for pre-punched, TCT 0.75 0.95 mm steel (22 20 gauge)
Drill Point: Designed for pre-punched as well as non-punched, TCT 0.95 to 1.55 mm steel (20 16 gauge)
Patent Protected
Application:
Features and Benets
Specications:
Pin Point aligns pre-punched holes during frame assembly for a high quality accurate nish.
Drill Point is designed for easy penetration into heavier gauge steel for quick and easy assembly.
X-Drive

recess delivers increased stability and higher torque making it signicantly easier to drive, reducing
worker fatigue and increasing productivity.
X-Drive

incorporates a larger surface area of engagement, reducing stress on driver bits resulting in fewer
breakages.
Low prole at head sits perfectly ush with the steel frame edge, providing a smooth, at nishing surface for
easy and accurate installation of cladding and lining.
Underhead serrations slow the head down when rotating, reducing the opportunity for strip out and providing
resistance to back out, lessening the chance for vibrational loosening during transportation.
E-Coat offers a high level of corrosion resistance and durability to the X-Drive

.
Compatible with Superdrive collated screw system for increased speed.
Gauge - 10 , 12
Length - 19mm
Tip Type - Sharp Point and Drill Point
Head Type - Flat
Drive Type - X-Drive

Thread -18 Threads per inch


Finish - E-coat Green 1000hrs or Yellow Zinc 48hrs in accordance with ASTM B117
Installation - RPM 0 - 2500
Manufactured - ISO 9001 and ISO14001 certied facilities, comply with SAE J78,
- DIN 18182 and ASTM C1002 and are approved by the Uniform Building Code.
Page 10
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
Wall and Truss Assembly - M6 Fastite Framer
Specically engineered to help businesses reach optimum production rates.
Specialised fastener for transportable buildings, modular buildings, or pre-fabricated steel framing that will
be transported long distances.
Pin Point (PP) suitable for pre-punched holes metal 0.55mm to 1.15mm
Drill Point (DP) suitable for metal 0.95mm to 1.15mm, no pre-punched holes required.
Pin Point (PP) aligns pre-punched holes during frame assembly, creating premium quality connections and
exceptionally accurate framing.
Drill Point (DP) enables drilling into medium to heavy gauge steel. No pre-punched holes are required.
TRILOBULAR Body: Provides superior resistance to vibrational loosening during transport.
Extrudes thin metal for maximum thread engagement.
Twin Helix thread: provides double thread engagement, increased stability and quicker installation.
Undercut head with serration: Absorbs material
Gauge - M6
Length - 19mm
Tip Type - Sharp Point and Drill Point
Head Type - Flat
Drive Type - Phillips #3
Thread - 18 Threads per inch
Finish - E-coat 1000hrs AS3566.2 2002 coating class 3 in accordance with ASTM B117
Installation - RPM 0 - 2500
Manufactured - ISO 9002 and ISO14001 certied facilities, comply with SAE J1237-01
Page 11
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
Application:
Features and Benets
Specications:
Wall and Truss Assembly - Dual Thread Square Drive Framer
Specically engineered to help businesses reach optimum production rates.
Fabrication of steel wall framing, roof trusses and oor joists.
Pin Point (PP) suitable for pre-holes metal 0.55mm to .95mm Light Gauge Steel Frames.
Drill Point (DP) suitable for no pre-hole metal 0.95mm to 1.2mm Light Gauge Steel Frames.
Square drive recess delivers increased driving stability and higher torque, reducing operator fatigue.
Pin Point aligns pre-punched holes during frame assembly creating accurate frames.
Dual Thread conguration results in a tight connection suitable for transportable buildings.
Wafer head sits ush with dimple providing a smooth surface for cladding and lining.
Undercut head with serration: Absorbs material extruded by the screw and increases the underhead contact
area to increase resistance to stripping.
Square drive enables screw to stick to driver bit allowing for single hand operation.
Gauge - 10 (4.8mm)
length - 16mm and 19mm
Tip Type - Sharp Point and Drill Point
Head Type - Wafer
Drive Type - Square #2
Thread - Dual thread 20 & 16
Finish - E-coat 1000hrs AS3566.2 2002 coating class 3 in accordance with ASTM B117
Installation - RPM 0 - 2500
Page 12
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
Application:
Features and Benets
Specications:
Hex Head Frame and Truss Connector
Specically engineered to help businesses reach optimum production rates.
Metal to metal connections for joining frames and trusses, connecting frames to steel oors or adding strength
to connectors.
Suitable metal 0.75mm (22 gauge) to 2.0mm (14 gauge).
Note: for metals over 1.5mm, 12 gauge screws are recommended.
Hex Head provides a high torque which is ideal for metal to metal applications.
The Hex Head provides additional screw strength.
Drill Point (DP) enables drilling into medium to heavy gauge steel. No pre-punched holes are required.
Used in conjunction with FRAMECAD Certied Connectors, to provide additional structure support and
strength.
Note: Also available with a EPDM Washer
Gauge - 10 (4.8mm), 12 (5.5mm), 14 (6.3mm)
Length - 16mm, 19mm, 20mm, and 25mm
Tip Type - Drill Point
Head Type - Hex Head
Drive Type - Hex Head
Thread - 16 and 14
Finish - Grey 1000 or 2000hrs and Yellow Zinc 24 or 48hrs in accordance with ASTM B117
Installation - RPM 0 - 4000
Manufactured - ISO 9001 and ISO certied facilities.
Washer
Page 13
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
Application:
Features and Benets
Specications:
Strapping and Bracing Connectors
Specically engineered to help businesses reach optimum production rates.
Metal to metal screw ideal for steel bracing or strapping, adding additional strength to connectors and brace
straps.
Low prole 1mm thick head ensures ush bearing surface for lining substrates.
Drill Point (DP) enables drilling into medium to heavy gauge steel. No pre-punched holes are required.
Note only available in Phillips # 2 Drive.
Used in conjunction with FRAMECAD

Certied Connectors, to provide additional support and strength.


Gauge - 10 (4.8mm) and 12 (5.5mm)
Length - 16mm and 19mm
Tip Type - Drill Point
Head Type - Flat
Drive Type - Phillips #2
TPI - 16 threads per inch
Finish - 48hrs and 1000hrs in accordance with ASTM B117
Installation - RPM 0 - 2500
Manufactured - ISO 9001 and ISO certied facilities.
Page 14
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
Application:
Features and Benets
Specications:
Light Gauge Steel to Medium Steel
Specically engineered to help businesses reach optimum production rates.
General metal to metal screw ideal for connecting light gauge steel to medium to heavy steel.
Hex Head provides high torque and extra strength making it easier to drive for metal to metal connections.
Drill Point (DP) enables drilling into medium to heavy gauge steel.
No pre-punched holes are required.
Gauge - 12 (5.5mm)
Length - 32mm
Tip Type - Drill Point
Head Type - Hex Head
Drive Type - Hex Head
TPI - 24 Threads per inch
Finish - Grey 1000hrs in accordance with ASTM B117
Installation - RPM 0 - 2500
Manufactured - ISO 9001 and ISO certied facilities.
Page 15
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
Application:
Features and Benets
Specications:
Wraps and Insulation
Specically engineered to help businesses reach optimum production rates.
Attaching building wrap / weather barrier or insulation to steel framing.
Attaching steel mesh to cladding.
Extra wide 1mm head for greater surface area to increase holding power.
Drill Point (DP) enables drilling into medium to heavy gauge steel. No pre-punched holes are required.
Wafer Button is designed to have more surface area contact.
Phillips #2 head drive enables cam-out, preventing overdriving and break through of substrate.
Gauge - 8 (4.2mm), and 10 (4.8mm)
Length - 16mm, 19mm and 32mm
Tip Type - Drill Point
Head Type - Wafer Button
Drive Type - Phillips #2
TPI - 18 Threads per inch
Finish - Yellow 24 and 48hrs in accordance with ASTM B117
Installation - RPM 0 - 2500
Manufactured - ISO 9002 and ISO certied facilities.
Page 16
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
Application:
Features and Benets
Specications:
Cladding and Flooring
X-Drive

Cladding Fasteners have been specically designed for quick and easy installation
of cladding and ooring into light gauge steel frames.
Suitable for a wide range of cladding and ooring substrates, such as FRAMECAD

Fibre Cement, MGO Board,
Engineered timbers, Sandwich Panels etc.
Patent Protected
High torque, dual thread, designed for 4.5mm to 12mm cladding and ooring substrates.
Winged Drill Point (WDP) design for xing claddings to Light Gauge Steel Frames without pre drilled holes.
Drill Point (DP) enables drilling into medium to heavy gauge steel however pre-drilled holes are required for Drill
Point (DP) screws.
X Drive recess delivers increased stability and higher torque making it signicantly easier to drive, reducing
worker fatigue and increasing productivity.
Innovative thread design allows the X Clad Thin to drive through steel without jacking up the board.
Increased diameter thread with reduced angle down towards the shank works to signicantly reduce overdriving
providing a more stable and secure connection.
Specically engineered thread easily penetrates through steel while still achieving maximum connection strength.
Wings bore out cladding for easy drilling and snap off seamlessly when they hit the steel for a more stable and
secure connection.
Gauge - 8 (4.2mm), 10 (4.8mm)
Length - 25mm, 35mm, 40mm and 45mm
Tip Type - Drill Point and Winged Drill Point
Head Type - Countersunk (CSK)
Drive Type - X Drive #1
TPI - 16,18 Threads per inch
Finish - E Coat Green 1000hrs, Yellow 48hrs in accordance with ASTM B117
Installation - Drill Point 0-2500 / Winged Drill Point RPM 0 - 4000
Coating - Coating Class AS3566.2 2002 - 3
Manufactured - ISO 9002 and ISO certied facilities. Complies with SAE J78,
- DIN 18182 and ASTM C1002 and are approved by the Uniform Building Code.
Page 17
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
Application:
Features and Benets
Specications:
Cladding and Flooring - Phillips
Specically engineered to help businesses reach optimum production rates.
Suitable for a wide range of cladding and ooring substrates, such as Fibre cement, MGO Board Engineered
timbers, Sandwich Panels etc.
Winged Drill Point (WDP) design for xing claddings to light gauge steel frames. No pre drilling required.
Drill Point (DP) enables drilling into medium to heavy gauge steel. Pre-drilled holes are required.
Flat Countersunk (CSK) head provides a at bearing surface.
Wings bore out cladding for easy drilling and snap off seamlessly when they hit the steel for a more stable and
secure connection.
Gauge - 8(4.2mm), 10 (4.8mm)
Length - 25mm, 32mm, 35mm, and 45mm
Tip Type - Winged Drill Point
Head Type - Countersunk (CSK)
Drive Type - Phillips #2
TPI - 16, 18 Threads per inch
Finish - E Coat Green 1000hrs, Yellow 48hrs ASTM B117, Coating Class AS3566.2 2002 - 3
Installation - Drill Point 0-2500 / Winged Drill Point RPM 0 - 4000
Manufactured - ISO 9002 and ISO 14001 certied and approved.
Page 18
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
Application:
Features and Benets
Specications:
Interior Lining
Specically engineered to help businesses reach optimum production rates.
Suitable for xing Gypsum and MGO Board lining to light gauge steel frames.
Self Tapping Drill Point design for xing claddings to Light Gauge Steel Frames over 0.95mm.
Self Tapping Pin Point design to penetrate quickly and easily into steel.
Flat Countersunk (CSK) head provides a at bearing surface.
Phillips head drive enables cam-out, preventing overdriving and breaking paper surface of lining boards.
The Bugle Scavenger head is designed to seat fast and easily into soft wood or drywall, creating a ush
surface nish.
Gauge - 6 (3.5mm)
Length - 32mm
Tip Type - Drill Point
Head Type - Countersunk (CSK)
Drive Type - Phillips #2
TPI - 20 Threads per inch
Finish - Black/Grey 1000hrs, ASTM B117, Coating Class AS3566.2 2002 - 3
Installation - RPM 0 - 2500
Manufactured - ISO 9002 and ISO 14001 certied and approved factory, and are approved
by ICBO ES ER#5280,and are approved for use by the Uniform Building Code.
Page 19
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
Application:
Features and Benets
Specications:
Roong - EPDM Washer installation
Do not overdrive. Over -compression will damage the washer and reduce its effectiveness.
Too Loose
Sealing material is not visable: not enough compression to seal.
Too Tight
Washer is deformed; sealing material pressed beyond fastener edge.
Correct
Sealing material slightly visible at edge of washer - assembly is water tight.
EPDM Washers
Using high quality EPDM washer is a critical part of having a watertight roof or cladding. Because the washers
are small and relatively inexpensive, their importance in a roong project is sometimes overlooked. A poor qual-
ity washer can result in enormous costs if it is made of inferior material. The washer is vital in maintaining the
integrity of the roong system. A failure in the washer can mean at best replacement of the screws, or at worst,
considerable damage to the entire roof and building structure.
FRAMECAD

use only premium EPDM compounds for its range of roong screws, ensuring a high quality
fastening solution for steel frames roofs and metal claddings. sidings.
FRAMECAD

roong screws incorporate the use of DEKS EPDM washers. Deks quality roong washers are
chosen globally by major fastening suppliers to ensure their fastening systems provide a weather tight seal
against wind, rain, heat and sunlight.
Page 20
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
Roong
Specically engineered to help businesses reach optimum production rates.
For metal roof assembly.
Designed for xing long run steel for roong , as well as side cladding ( e.g. Sandwich Board).
Hex Head provides a high torque which is ideal for metal to metal applications.
The Hex Head provides additional screw strength.
Drill Point (DP) enables drilling into medium to heavy gauge steel. No pre-drilled holes are required.
EPDM Washer provides water proof seal which is essential for roong and metal xing side claddings.
Use powered or cordless screw with a 2500 RPM Speed. Apply rm pressure.
Available to match roof colour.
Heat treatment AS 3566.1
Finished to AS 3566.2 Class 4
Gauge - 10 (4.8mm), 12 (5.5mm), 14 (6.3mm)
Length - 19mm, 35mm, 50mm, 65mm and 75mm
Tip Type - Drill Point
Head Type - Hex Head
Drive Type - Hex Head
Thread - 16 and 14
Finish - Grey 2000 hrs, in accordance with ASTM B117
Installation - RPM 0 - 2500
Manufactured - ISO 9001 and ISO certied facilities.
Page 21
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
Application:
Features and Benets
Specications:
Anchor Bolts
Specically engineered to help businesses reach optimum production rates.
High-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of
the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings.
Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications.
The high strength, easy to install Titen HD anchor has been tested and shown to provide outstanding
performance in cracked and uncracked concrete under both static and seismic loading conditions.
It is designed for optimum performance in both cracked and uncracked concrete; a requirement that the 2009
IBC places on post-installed anchors.
Gauge - M8 , M10, M12 and M16
Length - 75mm, 80mm, 90mm, 110, 130mm, and 150mm
Head Type - Hex Head
Drive Type - Hex Head
Finish - Zinc Plated in compliance with ASTM B633, Sc1, AS3566.2, class1.
Installation - RPM 0 - 2500
Manufactured - ISO 9001 and ISO 14001 certied approved facilities. Have been tested in accordance with
ICC-ES AC193, ACI 355.2 and AC106.
Page 22
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
Application:
Features and Benets
Specications:
Image Driver Product Description Code#
Square
Driver, SQ#2, 50mm 001552
Driver, SQ#2, 150mm 001882
Driver SQ#2, 153mm 003156
X Driver #1
Driver, X#1, 50mm 001441
Driver, X#1, 153mm 002793
Torx
Driver Torx, 50mm 308336
Driver Torx, 153mm 308337
Phillips #3 Driver, Ph#3, 50mm 002959
Phillips #2
Driver, Ph#2, 25mm 001381
Driver, Ph#5, 50mm 001549
Driver, Ph#2, 50mm (Long Life) 002500
Driver, Ph#2, 153mm 001380
Driver, Ph#2, 163mm 002647
Hex 5/16
Driver, Hex Socket 5/16 x 65mm with Magnet 001553
Driver, Hex Socket 5/16 x 150mm with Magnet 001554
Hex 3/8
Driver, Hex Socket 3/8 x 65mm with Magnet 003220
Driver, Hex Socket 3/8 x 150mm with Magnet 003221
Hex 8mm
Driver, Hex Socket 8mm x 200mm with Magnet 003100
Driver, hex Socket 8mm x 250mm with Magnet 004741
Page 23
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
Tools - HITACHI Cordless Impact Driver
Specically engineered to help businesses reach optimum production rates.
Features and Benets
Specications:
Lithium Ion Batteries for three times the life at half the weight of NiCd or NiMH batteries.
High torque to power through the toughest jobs with ease.
Industrial grade motor for durability.
Compact ergonomic design for less operator fatigue.
Ergonomic shape ts like a glove with even pressure and easy control.
Robust carry case makes it easy to carry and store.
Power - 18 Volt
Torque - 145Nm / 1,330 in.lbs
Speed - 0 - 2,6000/min.
Length - 162mm (6-3/8)
Weight - 1.6kg (3.5 lbs)
Code - 001883 - Hitachi Cordless Impact Driver
Driver Kit includes: 1 Driver, 1 Charger, 2 batteries
Page 24
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
Tools - SuperDrive Collated Screw System
Specically engineered to help businesses reach optimum production rates.
Features and Benets
The SuperDrive is an automatic screw delivery system that maximises the speed for fastening screws.
It can be used for;
Exterior and Interior Wall claddings and linings
Ceilings
Flooring
Metal Framing Assembly - For 16mm - 25mm long framing screws in dimple system
Nose Piece
Coupler SuperDrive
SuperDrive Extension Kit
Code Description
000397 Superdrive 05 - Metal Framing
001371 Superdrive 55 - Drywall & Suboor
001459 Superdrive 75 - Suboor & Decking
Using the extension kit gives you over 550mm of extra reach and lets you screw off a 3m ceiling while standing
on the ground. Screw off oors without bending or crawling.
Code Description
001880
Superdrive - Extension Kit
(includes Housing, Bit and Handle
Page 25
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
Adhesive - FRAMECAD FastBond
FRAMECAD

FastBond is a premium, water based, multi purpose construction adhesive providing strong
initial grab and high bond strength.
FRAMECAD FastBond:
Fast cure, zero solvent, multi purpose construction adhesive.
Uses:
FRAMECAD FastBond can be used on most substrates due to its excellent adhesion.
These include bonding;
Panels to wall studs
Fibre cement, plywood, particleboard and strip ooring to joists
Polystyrene wall panels
Architraves, trims and skirting boards to walls & loose tiles onto walls.

Advantages:
Can be repositioned for up to 60 minutes after application
Easy to use, easy clean up
Reduces squeaking associated with nail ride in oors
Can be painted with water-based coatings
Can bridge gaps up to 9 mm
High bond strength, with particularly strong adhesion to metal
Fast initial grab minimises slippage on vertical surfaces
Reduces number of mechanical fasteners required to install oors or walls.
Zero solvent* low odour and no fumes
Low V.O.C.** (Volatile Organic Compounds)
High heat resistance
Flows easily at all temperatures
Test Approvals and Standards:
Complies to AS2329-1980,Mastic Adhesives for Fixing Wallboards.
FRAMECAD FastBond is solvent free, low V.O.C. and non-ammable. No solvents are added or used during
the manufacturing process.
FRAMECAD FastBond has been independently tested for V.O.C. content, as a general purpose construction
and wall board adhesive for the purpose of Green Star rating. Certicate ref. F0909-12.
PRODUCT & TECHNICAL DATA
Specic gravity: ~1.4
Skinning time: 20 minutes
Page 26
Copyright 2013 FRAMECAD Ltd. All rights reserved
FRAMECAD

Fastening Solutions
www.framecad.com
English-Fastenings-2013
We have ofces here:
Auckland, New Zealand (Head Ofce)
Dubai, UAE
Dallas, USA
Hong Kong
Melbourne, Australia
Johannesburg, South Africa
www.framecad.com
This document has been published for
the purpose of providing information
of a general nature only. Further, no
guarantee, warranty, or any other
form of assurance is given as to the
accuracy, currency or completeness of
the information provided. Accordingly,
any reliance on, or use, by you of any
information contained within this
document for any purpose whatsoever
shall be entirely at your own risk, and any
liability to you is expressly disclaimed to
the maximum extent permitted by law.
FRAMECAD

Ltd , logos and Trademarks


are the property of FRAMECAD Ltd.
Copyright 2013 FRAMECAD

Ltd.
Reproduction of any part of this
document is prohibited, except with the
prior written consent of FRAMECAD

Ltd.

Potrebbero piacerti anche