Sei sulla pagina 1di 5

Projector Wall Mount for SMART Board™ Interactive Whiteboards

Specifications – Model PMWT-660/PMWT-680


Physical Specifications PMWT-660 PMWT-680
Size 32" W × 27 5/8" to 28" H × 27" D 32" W × 27 5/8 to 29 1/4" H × 27" D
(81.3 cm × 70.2 to 71.1 cm × 68.6 cm) (81.3 cm × 70.2 to 74.3 cm × 68.6 cm)
Weight
(Projector Wall Mount Only) 10 1/2 lb. (4.8 kg) 10 1/2 lb. (4.8 kg)
Weight
(Projector Wall Mount, Projector and Interactive Whiteboard) 51 1/2 lb. (23.4 kg) 53 1/2 lb. (24.3 kg)
Recommended Minimum Ceiling Height 8'4" (2.54 m) 9'1" (2.76 m)
Shipping Size 35" W × 9 1/2" H × 20" D 35" W × 9 1/2" H × 20" D
(88.9 cm × 24.1 cm × 50.8 cm) (88.9 cm × 24.1 cm × 50.8 cm)
Shipping Weight 18 lb. (8.2 kg) 18 lb. (8.2 kg)
All dimensions +/- 1/8" (3.2 mm). All weights +/- 2 lb. (0.9 kg).

Standard Features
Finish Powder-coated aluminum and steel construction
Projector Wall Mount Two projector brackets allow you to install the NEC WT600 or NEC WT610 projector with a SMART Board 660 or 680
interactive whiteboard. The projector is not included, so you must order it separately from your NEC dealer.
Projector You can mount only an NEC WT600 or NEC WT610 projector on the projector wall mount. The cables that come with the
projector often can’t reach the power outlet and the computer, so you may need to purchase longer cables or install a wall-
access panel.
Toggle Wall Anchor Six 1/4-20 toggle wall anchors are included to install the projector wall mount on hollow stud walls clad with drywall
sheeting
NOTE: To install the projector wall mount on concrete or cinder block, you’ll need six anchoring devices that are suitable for
the type of wall and are compatible with the provided 1/4-20 × 2" security hex screws. Such anchors usually require a drill
and bit of a particular type and size. For more information, consult the directions that are included with the anchoring
devices.
Screws and Keys Ten No. 8-32 × 1/2", four No. 8-32 × 1" and six 1/4-20 × 2" security hex screws as well as four TORX® M4 × 40 mm security
screws to safeguard the projector. A 5/32" security hex key and a TR20 security TORX key are also included.
Warranty Two-year limited equipment warranty

Installation Heights
When you install the projector mount above an interactive whiteboard, you must consider the height of the room’s ceiling. A
ceiling height of 8'4" (2.54 m) will accommodate the recommended installation height for the SMART Board 660 interactive
whiteboard, while a ceiling height of 9'1" (2.76 m) will accommodate the recommended height for the SMART Board 680
interactive whiteboard. If you have a low ceiling, the interactive whiteboard will be below the recommended height.

The following table shows the approximate resulting heights (to the top of the interactive whiteboard) for various ceiling
heights.

Ceiling Height Ceiling Height Ceiling Height


8' (2.44 m) 8'4" (2.54 m) 9'1" (2.76 m)
PMWT-660 69 3/4" (177.2 cm) 73 3/4" (187.3 cm) 73 3/4" (187.3 cm)
Height from Floor to Top of (below recommended (recommended (recommended
Interactive Whiteboard installation height) installation height) installation height)
PMWT-680 68 3/4" (174.6 cm) 72 3/4" (184.8 cm) 81 3/4" (207.7 cm)
Height from Floor to Top of (below recommended (below recommended (recommended
Interactive Whiteboard installation height) installation height) installation height)

SMART Order Number


PMWT-660 Projector wall mount for a SMART Board 660 interactive whiteboard
PMWT-680 Projector wall mount for a SMART Board 680 interactive whiteboard

SMART Technologies Inc.


1207 – 11 Avenue SW, Suite 300
Calgary, AB T3C 0M5
CANADA
Phone +1.403.245.0333
Toll Free 1.888.42.SMART (Canada/U.S.)
info@smarttech.com www.smarttech.com
© 2004–2006 SMART Technologies Inc. All rights reserved. SMART Board and the SMART logo are trademarks of SMART Technologies Inc. NEC is a trademark of NEC Corporation. All other third-party product and company names may be
trademarks of their respective owners. U.S. Patent No. 6,540,366. Other U.S., Canadian and foreign patents pending. Specifications are subject to change without notice. 03/2006.
Projector Wall Mount for SMART Board™ Interactive Whiteboards
Specifications – Model PMWT-660

Ceiling

For ceilings lower


than 8'4" (2.54 m),
the required distance
from the ceiling to the top
of the wall mount bracket
is 4" (10.2 cm)

Recommended For ceilings Active Screen Area


installation higher than 51 1/4" W × 38 3/8" H
height to 8'4" (2.54 m), the (130.2 cm × 97.5 cm)
top of recommended
interactive distance from

41 1/2" (105.4 cm)


whiteboard the floor to the
is 73 3/4" lower anchors )
(187.3 cm) of the wall mount 6 cm
for adults bracket is 6 2.
" (1
of average 72 3/4" 64
height (184.8 cm)

54 3/4" (139.1 cm)

NOTE: A SMART Board 660 interactive


whiteboard and an NEC WT600 or NEC
WT610 projector are not included.

Floor

Wall Plate Side View Top View

12 1/4"
(31.2 cm)

9"
(22.9 cm)

12"
(30.5 cm)

d Manufacture
an d
u
ed
nd
n
si g

28" 27 5/8" 27"


er
De

an

32" (81.3 cm)


(71.1 cm) (70.2 cm) (68.6 cm) ISO 9001
(Top Position)
eg
m
R

is te
tere ys
d Quality S
Projector Wall Mount for SMART Board™ Interactive Whiteboards
Specifications – Model PMWT-680

Ceiling

For ceilings lower


than 9'1" (2.76 m),
the required distance
from the ceiling to the top
of the wall mount bracket
is 5" (12.7 cm)

Recommended For ceilings


installation higher than Active Screen Area
height to 9'1" (2.76 m), the 61 5/8" W × 46 3/8" H
top of recommended (156.5 cm × 117.8 cm)
interactive distance from
whiteboard the floor to the

49 1/2" (125.7 cm)


is 81 3/4" lower anchors
(207.7 cm) of the wall mount )
c m
for adults bracket is .6
95
of average 80 3/4" " (1
height (205.1 cm) 77

65 1/4" (165.7 cm)

NOTE: A SMART Board 680 interactive


whiteboard and an NEC WT600 or NEC
WT610 projector are not included.

Floor

Wall Plate Side View Top View

12 1/4"
(31.2 cm)

9"
(22.9 cm)

12"
(30.5 cm)

d Manufacture
an d
u
ed
nd
n
si g

29 1/4" 27 5/8" 27"


er
De

an

32" (81.3 cm)


(74.3 cm) (70.2 cm) (68.6 cm) ISO 9001
(Top Position)
eg
m
R

is te
tere ys
d Quality S
Projector Wall Mount for SMART Board™ Interactive Whiteboards
Template for Installing the PMWT-660 or PMWT-680 in a Room with a High Ceiling

10" (25.4 cm)

NOTE: These measurements are


PMWT-660: 95 3/4" (243.2 cm) for rooms with ceilings that are
PMWT-680: 103 3/4" (263.5 cm) 8'4" (2.54 m) or higher (for the
PMWT-660) and for rooms with
ceilings that are 9'1" (2.76 m) or
higher (for the PMWT-680).

PMWT-660: 91 3/4" (223.1 cm)


PMWT-680: 99 3/4" (253.4 cm)

8" (20.3 cm)


PMWT-660: 87 3/4" (222.9 cm)
PMWT-680: 95 3/4" (243.2 cm)

Suggested Location
for the Projector
Cable Outlets
11" (27.9 cm)

PMWT-660: 76 3/4" (195.0 cm)


PMWT-680: 84 3/4" (215.3 cm)
PMWT-660 PMWT-680 NOTE: If you install the
For ceilings higher than For ceilings higher than projector wall mount at a lower
8'4" (2.54 m), this 9'1" (2.76 m), this height, the top of the interactive
horizontal line should be horizontal line should be whiteboard will be lower than
72 3/4" (184.8 cm) 80 3/4" (205.1 cm) recommended.
PMWT-660: 72 3/4" (184.8 cm) from the floor. from the floor.
PMWT-680: 80 3/4" (205.1 cm)

(Distance from Floor)


12" (30.5 cm)
d Manufacture
an d
u
ed
nd
ign

er
Des

an

ISO 9001
eg
m
R

iste st e
red Quality Sy
Projector Wall Mount for SMART Board™ Interactive Whiteboards
Template for Installing the PMWT-660 or the PMWT-680 in a Room with a Low Ceiling

Low Ceiling

(Distance from Ceiling)


10" (25.4 cm)

PMWT-660: 4" (10.2 cm)


PMWT-680: 5" (12.7 cm)
NOTE: If you install the PMWT-660 PMWT-680
projector wall mount in a For ceilings lower than For ceilings lower than
higher position than 8'4" (2.54 m), this 9'1" (2.76 m), this
recommended, you will not horizontal line must horizontal line must
have adequate clearance be 4" (10.2 cm) be 5" (12.7 cm)
between the projector mount from the ceiling. from the ceiling.
and the ceiling. PMWT-660: 8" (20.3 cm)
PMWT-680: 9" (22.9 cm)

8" (20.3 cm)


PMWT-660: 12" (30.5 cm)
PMWT-680: 13" (33.0 cm)

Suggested Location
for the Projector
Cable Outlets

PMWT-660: 23" (58.4 cm)


PMWT-680: 24" (61.0 cm)

NOTE: These measurements are


for rooms with ceilings that are
lower than 8'4" (2.54 m) (for the PMWT-660: 27" (68.6 cm)
PMWT-660) and for rooms with PMWT-680: 28" (71.1 cm)
ceilings that are lower than 9'1"
(2.76 m) (for the PMWT-680).

Manufacture
12" (30.5 cm) ed
an
d d
u
nd
ign

er
Des

an

ISO 9001
eg
m
R

iste st e
red Quality Sy

Potrebbero piacerti anche