Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product congurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
Fascia
Blade
Outrigger
Kawneer reserves the right to change conguration without prior notice when deemed necessary for product improvement.
Features Standardized solution for seamless integration with 1600 Wall System1, 1600 Wall System2, 1600UT SystemTM1, 1600 Wall System5, 1600 SSTM and 1600 SSTM SSG. Tested for combined wind, snow and dead loads 30 (762 mm) and 36" (914.4 mm) deep Outriggers are standard Fully pre-engineered 90 and 135 inside and outside corners Thermally broken attachment method for 1600 Wall System1, 1600UT SystemTM1, 1600 SSTM and 1600 SSTM SSG. 1600 Wall System2 & 1600 SSTM SSG allow 2 sided SSG. Attachment bracket designed to accept shallow and deep covers Easy to use Load Charts quicken design process Refreshing new blade options, with tubular proles for spanning wider openings 44 different combinations of outrigger and blade styles allow aesthetic & shading performance exibility Qualied for up to 3 different LEED Certication criteria Shading performance can be analyzed by SolectorTM Sun Shading Estimator Tool Product Application Curtain Wall Facades Interior aesthetical application
2
BLANK PAGE EC 97911-45
kawneer.com Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product congurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
Kawneer reserves the right to change conguration without prior notice when deemed necessary for product improvement.
Architects - Most extrusion and window types illustrated in this catalog are standard products for Kawneer. These concepts have been expanded and modied to afford you design freedom. Some miscellaneous details are non-standard and are intended to demonstrate how the system can be modied to expand design exibility. Please contact your Kawneer representative for further assistance.
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product congurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
1600 WALL SYSTEM1....................................................................... 4 1600 WALL SYSTEM2....................................................................... 5 1600UT SYSTEMTM1 1" INFILL......................................................................................... 6 1-3/4" INFILL.................................................................................. 7 1600 WALL SYSTEM5....................................................................... 8 1600 SSTM............................................................................................. 9 1600 SSTMSSG................................................................................... 10 90 and 135 CORNERS.............................................................. 11,12 SUNSHADE COMBINATIONS..................................................... 13,14 LOAD CHARTS............................................................................. 15-17
Kawneer reserves the right to change conguration without prior notice when deemed necessary for product improvement.
LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE, WINDOW, AND CURTAIN WALL PRODUCTS VARY WIDELY. KAWNEER DOES NOT CONTROL THE SELECTION OF PRODUCT CONFIGURATIONS, OPERATING HARDWARE, OR GLAZING MATERIALS, AND ASSUMES NO RESPONSIBILITY THEREFOR. Metric (SI) conversion gures are included throughout these details for reference. Numbers in parentheses ( ) are millimeters unless otherwise noted. The following metric (SI ) units are found in these details: m meter cm centimeter mm millimeter s second Pa pascal MPa megapascal Kawneer reserves the right to change congurations without prior notice when deemed necessary for product improvement.
DETAIL "A"
DETAIL "A"
SHOWN WITH 36" ROUNDED OUTRIGGER, AIRFOIL BLADE, BULLNOSE FASCIA, AND SHALLOW COVER. OPTIONAL 3-1/8" (79.4) DEEP COVER AVAILABLE
NOTE: Horizontal sunshades are not recommended directly over entrances and walkways to eliminate any risk of injury due to falling ice or snow. Attachment bracket is painted only and will be painted to match anodized nish.
kawneer.com
Kawneer reserves the right to change conguration without prior notice when deemed necessary for product improvement.
36" (914.4)
5" (127)
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product congurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product congurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
DETAIL "A"
Kawneer reserves the right to change conguration without prior notice when deemed necessary for product improvement.
36" (914.4)
5" (127)
DETAIL "A"
SHOWN WITH 36" ROUNDED OUTRIGGER, AIRFOIL BLADE AND BULLNOSE FASCIA.
NOTE: Horizontal sunshades are not recommended directly over entrances and walkways to eliminate any risk of injury due to falling ice or snow. Attachment bracket is painted only and will be painted to match anodized nish.
kawneer.com
DETAIL "A"
DETAIL "A"
SHOWN WITH 36" CURVED OUTRIGGER, DIAMOND BLADE, CIRCULAR FASCIA, AND SHALLOW COVER. OPTIONAL 3-1/8" (79.4) DEEP COVER AVAILABLE
NOTE: Horizontal sunshades are not recommended directly over entrances and walkways to eliminate any risk of injury due to falling ice or snow. Attachment bracket is painted only and will be painted to match anodized nish.
kawneer.com
Kawneer reserves the right to change conguration without prior notice when deemed necessary for product improvement.
36" (914.4)
5" (127)
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product congurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product congurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
DETAIL "A"
Kawneer reserves the right to change conguration without prior notice when deemed necessary for product improvement.
36" (914.4)
5" (127)
DETAIL "A"
SHOWN WITH 36" WEDGE OUTRIGGER, CIRCULAR BLADE, ANGULAR FASCIA, AND SHALLOW COVER. OPTIONAL 3-1/8" (79.4) DEEP COVER AVAILABLE
NOTE: Horizontal sunshades are not recommended directly over entrances and walkways to eliminate any risk of injury due to falling ice or snow. Attachment bracket is painted only and will be painted to match anodized nish.
kawneer.com
DETAIL "A"
DETAIL "A"
SHOWN WITH 36" SQUARE OUTRIGGER, WAVE BLADE, RECTANGULAR FASCIA, AND SHALLOW COVER. OPTIONAL 3-1/8" (79.4) DEEP COVER AVAILABLE
NOTE: Horizontal sunshades are not recommended directly over entrances and walkways to eliminate any risk of injury due to falling ice or snow. Attachment bracket is painted only and will be painted to match anodized nish.
kawneer.com
Kawneer reserves the right to change conguration without prior notice when deemed necessary for product improvement.
36" (914.4)
5" (127)
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product congurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product congurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
DETAIL "A"
Kawneer reserves the right to change conguration without prior notice when deemed necessary for product improvement.
36" (914.4)
5" (127)
DETAIL "A"
SHOWN WITH 36" ROUNDED OUTRIGGER, FLARE BLADE, BULLNOSE FASCIA, AND SHALLOW COVER. OPTIONAL 3-1/8" (79.4) DEEP COVER AVAILABLE
NOTE: Horizontal sunshades are not recommended directly over entrances and walkways to eliminate any risk of injury due to falling ice or snow. Attachment bracket is painted only and will be painted to match anodized nish.
kawneer.com
10
SSG APPLICATION
DETAIL "A"
Kawneer reserves the right to change conguration without prior notice when deemed necessary for product improvement.
36" (914.4)
5" (127)
DETAIL "A"
SHOWN WITH 36" ROUNDED OUTRIGGER, FLARE BLADE AND BULLNOSE FASCIA.
NOTE: Horizontal sunshades are not recommended directly over entrances and walkways to eliminate any risk of injury due to falling ice or snow. Attachment bracket is painted only and will be painted to match anodized nish.
kawneer.com
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product congurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
11
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product congurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
Kawneer reserves the right to change conguration without prior notice when deemed necessary for product improvement.
SHOWN WITH 30" ROUNDED OUTRIGGER, WAVE BLADE, BULLNOSE FASCIA AND SHALLOW COVER.
90 OUTSIDE CORNER Available with Single Mullion and Double Mullion Available with Single Mullion Available with Single Mullion and Double Mullion Available with Double Mullion Available with Double Mullion Use 1600 Wall System2 Single Mullion
Available with Double Mullion Use 1600 Wall System1 Double Mullion Available with Double Mullion Available with Double Mullion Available with Double Mullion Use 1600 SSTM Double Mullion
1600 Wall System2 1600UT SystemTM1 1600 Wall System5 1600 SSTM 1600 SSTMSSG
kawneer.com
12
135 INSIDE CORNER 1600 Wall System1 1600 Wall System2 1600UT SystemTM1 1600 Wall System5 1600 SSTM 1600 SSTMSSG Available with Double Mullion Use 1600 Wall System1 Double Mullion Available with Double Mullion Available with Double Mullion Available with Double Mullion Use 1600 SSTM Double Mullion
135 OUTSIDE CORNER Available with Single Mullion and Double Mullion Available with Single Mullion Available with Single Mullion and Double Mullion Available with Double Mullion Available with Double Mullion Use 1600 Wall System2 Single Mullion
Kawneer reserves the right to change conguration without prior notice when deemed necessary for product improvement.
kawneer.com
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product congurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
Kawneer reserves the right to change conguration without prior notice when deemed necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product congurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
kawneer.com
EC 97911-45
AUGUST, 2012
30" WEDGE
36" WEDGE
STANDARD OUTRIGGERS
36" ROUNDED
30" ROUNDED
36" CURVED 36" SQUARE 30" SQUARE ANGULAR RECTANGULAR BULLNOSE ARCH AIRFOIL INFINITY PLANAR WAVE CIRCULAR FLARE SQUARE CIRCULAR DIAMOND
30" CURVED
STANDARD FASCIAS
CIRCULAR
CIRCULAR
DIAMOND
STANDARD BLADES
SQUARE
13
14
INFINITY
ARCH
AIRFOIL
CIRCULAR
DIAMOND
SQUARE
INFINITY
ARCH
AIRFOIL
CIRCULAR
DIAMOND
SQUARE
INFINITY
ARCH
AIRFOIL
CIRCULAR
DIAMOND
SQUARE
INFINITY
ARCH
AIRFOIL
CIRCULAR
DIAMOND
SQUARE
DIAMOND
DIAMOND
CIRCULAR
15
90 85 80 75 70 65 60
2880 2640 A 2400 2160 1920 1680 G F E D C B 720 480 240 0 0 1 2 3 4 5 6 7 8 1440 1200 960
LOAD IN (PSF)
55 50 45 40 35 30 25 20
C - ARCH BLADE (494006) D - FLARE BLADE (494008) E - WAVE BLADE (494010) F - INFINITY BLADE (494009) G - AIRFOIL BLADE (494005)
Kawneer reserves the right to change conguration without prior notice when deemed necessary for product improvement.
15 10 5 0
OUTRIGGER SPACING (FT) A - 30" OUTRIGGER with CIRCULAR BLADE 482010 or SQUARE / DIAMOND BLADE 494011 B - PLANAR BLADE 494007 C - ARCH BLADE 494006 D - FLARE BLADE 494008 E - WAVE BLADE 494010 F - INFINITY BLADE 494009 G - AIRFOIL BLADE 494005 CURVE NOTES: LINES BECOME DASHED WHERE SPECIFIC BLADES LIMIT LOAD CAPACITY. ALLOWABLE DEFLECTION IS BASED ON L/120. CURVES SHOWN REPRESENT THE ALLOWABLE LOADING AT BOTH INTERMEDIATE AND CORNER CONDITIONS.
CENTER LINE TO CENTER LINE OF MULLIONS = OUTRIGGER SPACING (OS) + 0.938" LOAD IS A COMBINATION OF ALL APPLIED LOADS, SUCH AS WIND, SNOW, ICE, ETC. ACTING PERPENDICULAR TO THE BLADE. CHARTS HAVE BEEN ADJUSTED TO ACCOUNT FOR THE DEAD LOAD OF THE BLADES AND OUTRIGGER.
kawneer.com
16
55 50 45 40 35 30 25 20 15 10 5 0 0 1 2 3 4 5 6 7 8 G F E D C B A
2640 2400 2160 1920 1680 1440 1200 960 720 480 240 0
55 50 45 40 35 30 25 20 15 10 5 0 0 1 2 3 4 5 6 7 8 A G F E D C B
2640 2400 2160 1920 1680 1440 1200 960 720 480 240 0
OUTRIGGER SPACING (FT) A - 30" or 36" OUTRIGGER with CIRCULAR BLADE 482010 or SQUARE / DIAMOND BLADE 494011 B - PLANAR BLADE 494007 C - ARCH BLADE 494006 D - FLARE BLADE 494008 E - WAVE BLADE 494010 F - INFINITY BLADE 494009 G - AIRFOIL BLADE 494005 CURVE NOTES: LINES BECOME DASHED WHERE SPECIFIC BLADES LIMIT LOAD CAPACITY. ALLOWABLE DEFLECTION IS BASED ON L/120. CURVES SHOWN REPRESENT THE ALLOWABLE LOADING AT BOTH INTERMEDIATE AND CORNER CONDITIONS.
kawneer.com
CENTER LINE TO CENTER LINE OF MULLIONS = (OS) + 0.938" (1600 System1, 1600 SSTM, 1600UT SystemTM1) (OS) + 1.062" (1600 System2, 1600 SSTMSSG) LOAD IS A COMBINATION OF ALL APPLIED LOADS, SUCH AS WIND, SNOW, ICE, ETC. ACTING PERPENDICULAR TO THE BLADE. CHARTS HAVE BEEN ADJUSTED TO ACCOUNT FOR THE DEAD LOAD OF THE BLADES AND OUTRIGGER.
2880
60
2880
LOAD IN (PSF)
LOAD IN (PSF)
17
30" OUTRIGGER
OUTRIGGER SPACING (METERS)
1.0 100
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product congurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
36" OUTRIGGER
2.0 4800 4560 4320 4080 3840 3600 3360 3120 100 95 90 85 80 75 70 65
2.0 4800 4560 4320 4080 3840 3600 3360 3120 2880 2640 2400 2160 1920 1680 1440 A E D C B 1200 960 720 480 240 0
95 90 85 80 75 70 65 60
2880 2640 2400 2160 1920 A G F E D C B 720 480 240 0 0 1 2 3 4 5 6 7 8 1680 1440 1200 960
60
55 50 45 40 35 30 25
55 50 45 40 35 30 25 20 15 10 5 0 0 1 2 3 4 5 6 7 8
Kawneer reserves the right to change conguration without prior notice when deemed necessary for product improvement.
20 15 10 5 0
OUTRIGGER SPACING (FT) A - 30" or 36" OUTRIGGER with CIRCULAR BLADE 482010 or SQUARE / DIAMOND BLADE 494011 B - PLANAR BLADE 494007 C - ARCH BLADE 494006 D - FLARE BLADE 494008 E - WAVE BLADE 494010 F - INFINITY BLADE 494009 G - AIRFOIL BLADE 494005 CURVE NOTES: LINES BECOME DASHED WHERE SPECIFIC BLADES LIMIT LOAD CAPACITY. ALLOWABLE DEFLECTION IS BASED ON L/120. CURVES SHOWN REPRESENT THE ALLOWABLE LOADING AT BOTH INTERMEDIATE AND CORNER CONDITIONS.
CENTER LINE TO CENTER LINE OF MULLIONS = (OS) + 0.938" (1600 System5, 1600UT SystemTM1) LOAD IS A COMBINATION OF ALL APPLIED LOADS, SUCH AS WIND, SNOW, ICE, ETC. ACTING PERPENDICULAR TO THE BLADE. CHARTS HAVE BEEN ADJUSTED TO ACCOUNT FOR THE DEAD LOAD OF THE BLADES AND OUTRIGGER.
kawneer.com
LOAD IN (PSF)
LOAD IN (PSF)
18
BLANK PAGE EC 97911-45
kawneer.com Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product congurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
Kawneer reserves the right to change conguration without prior notice when deemed necessary for product improvement.