Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
in the method by which they can be configured using either CLI or ASDM
in the maximum traffic throughput supported in the number of interfaces in operating system version support
in types of interfaces
2- Which three security features do ASA models 5505 and 5510 support by default? (Choose three.)
intrusion prevention system stateful firewall VPN concentrator Zone-Based Policy Firewall
3- Which option lists the ASA adaptive security algorithm session management tasks in the correct order?
1) performing the access list checks 2) performing route lookups 3) allocating NAT translations (xlates) 4) establishing sessions in the fast path
4- When the ASA recognizes that the incoming packets are part of an already established connection, which three fast path tasks are executed? (Choose three.)
performing TCP sequence number checks performing the access list checks
This mode does not support VPNs, QoS, or DHCP Relay. The interfaces of the ASA separate Layer 3 networks and require IP addresses in different subnets.
This mode is referred to as a bump in the wire. In this mode the ASA is invisible to an attacker.
6-Refer to the exhibit. Which three sets of configuration commands were entered on the ASA 5505? (Choose three.)
interface e0/0
nameif outside
security-level 0
no shut
7- Refer to the exhibit. According to the exhibited command output, which three statements are true about the DHCP options entered on the ASA 5505? (Choose three.) The dhcpd auto-config outside command was issued to enable the DHCP client. The dhcpd address [start-of-pool]-[end-of-pool] inside command was issued to enable the DHCP client.
The dhcpd enable inside command was issued to enable the DHCP client.
The dhcpd auto-config outside command was issued to enable the DHCP server.
The dhcpd address [start-of-pool]-[end-of-pool] inside command was issued to enable the DHCP server. The dhcpd enable inside command was issued to enable the DHCP server.
8- Which three wizards are included in Cisco ASDM 6.4? (Choose three.) ADSL Connection wizard
9- Refer to the exhibit. What will be displayed in the output of the show running-config object command after the exhibited configuration commands are entered on an ASA 5505?
host 192.168.1.3
host 192.168.1.4
10- Refer to the exhibit. Which ASDM menu sequence would be required to configure Telnet or SSH AAA authentication using a TACACS server first or the local device user database if the TACACS server authentication is unavailable?
Configuration > Device Management > Management Access > Management Interface
Configuration > Device Management > Users/AAA > AAA Access Configuration > Device Management > Users/AAA > AAA Server Group
11- Which option lists the four steps to configure the Modular Policy Framework on an ASA?
2) Configure a service policy to identify which interface should be activated for the service.
3) Configure extended ACLs to identify specific granular traffic. This step may be optional.
1) Configure a service policy to identify which interface should be activated for the service.
2) Configure extended ACLs to identify specific granular traffic. This step may be optional.
1) Configure extended ACLs to identify specific granular traffic. This step may be optional. 2) Configure the class map to define interesting traffic. 3) Configure a policy map to apply actions to the identified traffic. 4) Configure a service policy to identify which interface should be activated for the service.
1) Configure extended ACLs to identify specific granular traffic. This step may be optional.
3) Configure a service policy to identify which interface should be activated for the service.
12- Which three types of remote access VPNs are supported on ASA devices? (Choose three.)
Clientless SSL VPN using a web browser IPsec (IKEv1) VPN using the Cisco VPN Client IPsec (IKEv1) VPN using a web browser
SSL or IPsec (IKEv2) VPN using the Cisco AnyConnect Client SSL or IPsec (IKEv2) VPN using the Cisco VPN Client
13- Which three components must be configured when implementing a clientless SSL VPN on an ASA 5505 device? (Choose three.)
client images
14 - Which three components must be configured when implementing a client-based SSL VPN
bookmark lists
group policy
SSL or IPsec
15- Refer to the exhibit. A remote host is connecting to an ASA 5505 via a VPN connection. Once authenticated, the host displays the highlighted system tray icon. On the basis of the information that is presented, what three assumptions can be made? (Choose three.) The host web browser window is displaying the ASA SSL web portal webpage containing bookmarks. The host has connected to the ASA via a client-based SSL VPN connection. The host is connected via the AnyConnect VPN client. The host is connected via the Cisco VPN client.
Using the ipconfig command on the host displays one IP address from the originating network.
Using the ipconfig command on the host displays an IP address from the originating network and an IP address for the VPN connection.
16- Refer to the exhibit. An administrator has entered the indicated commands on an ASA 5505. Based on the information presented, what type of remote access VPN has the administrator configured?
a clientless SSL VPN via a web browser an IPsec (IKEv1) VPN via the Cisco VPN Client
17- Which Cisco ASDM menu sequence would be used to edit a client-based AnyConnect SSL VPN configuration?
Configuration > Remote Access VPN > Clientless SSL VPN Access
Configuration > Remote Access VPN > Network (Client) Access Monitoring > VPN > VPN Sessions
18- Which three components must be configured when using the Site-to-Site VPN Connection Setup wizard in ASDM? (Choose three.)
crypto maps
IKE version
19- An administrator has successfully configured a site-to-site VPN on an ASA 5505. Which ASDM menu sequence displays the number of packets encrypted, decrypted, and security association requests?
Monitoring > VPN > VPN Statistics > Crypto Statistics Monitoring > VPN > VPN Statistics > Encryption Statistics
20- Which two statements correctly describe the ASA as an advanced stateful firewall? (Choose two.)
An ASA uses the Zone-Based Firewall feature and tracks the state of the TCP or UDP network connections that are traversing the network.
In routed mode, an ASA can support two or more Layer 3 interfaces. In routed mode, an ASA requires a management IP address that is configured in global configuration mode.
The first packet of a flow examined by an ASA goes through the session management path.