Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Light duty H = 50 mm, Medium duty H = 100 mm, Heavy duty H = 125 mm, Extra heavy duty H = 150 mm
02 09
12
- 57
12 14 18-39 18 22 28 34 40-51 40 46 52
58
58 60 62 68 70
- 73
Loading graphs HOT DIP GALVANISED STAINLESS STEEL 316 L Technical information
SWIFTRACK CHANNEL
Introduction Loading graph Pregalvanised/electro-galvanised HOT DIP GALVANISED STAINLESS STEEL 316 L
Integral coupler on fittings
74
74 76 76 77 78 79
- 81
Technical information
INTRODUCTION
>>>
ADVANTAGE BY STANDARDISATION
Worldwide standardisation offers clear timesaving and cost reduction. This in relation to engineering, purchasing, maintenance, logistics, administration, test and inspection, documentation, training and mounting.
Light duty H = 50 mm
TIME IS MONEY
In the development of new systems, ease of installation is the main criterion. The installation should be realised quickly and easily, but above all safety and durability must be guaranteed. The new cable ladder range for the heavy industry complies with all these demands. - Integral coupler on fittings. - Continuous perforation pattern for sidewalls, perfect fit for couplers without need for drilling even on cut lengths. - Available in 3 and 6m lengths. - Integral coupler on Light duty ladder H50.
ENGINEERING SUPPORT
GLOBAL PRESENCE
INSTALLATION SUPPORT
SAFETY FIRST
Designed for maximum safety The new world standard for cable management integrates all of Legrands knowledge and quality. All components have been designed for maximum safety, during installation as well as during its long life span. Safety features are often invisible, but it's those details that offer reliability and durability, even under extreme circumstances. Tests - All Legrand products are tested to the highest standards. The Cable management systems comply with European Standard IEC 61537. The loading tests have been done according to the most demanding test type 1 of this standard. Welded profiles - For optimal rigidity and stability Return flanges - Ladder lengths and fittings have a return flange sidewall, offering extra strength and avoiding sharp edges.
LOAD TEST
WELDING INSTALLATION
Reference list
Ref.no.
Page Pack.
Ref.no.
Page Pack.
Ref.no.
Page Pack.
Ref.no.
Page Pack.
Ref.no.
Page Pack.
4185-0101 4192-0100 5572 03 5572 33 5572 43 5572 53 5572 63 5572 73 5573 83 80400 35 80406 25 80406 30 80406 35 80406 40 80406 45 80406 50 80406 55 80406 60 80406 65 80406 70 80406 75 80406 85 80406 90 80406 91 80406 96 80499 06 80499 09 80600 32 80600 35 80606 25 80606 30 80606 35 80606 40 80606 45 80606 50 80606 55 80606 60 80606 65 80606 70 80606 75 80606 85 80606 90 80606 91 80606 96 80607 25 80607 30 80607 35 80607 40
68 68 65 62 62 62 62 62 62 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 68 68 65 67 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 65 65 65 65
1 25 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 100 100 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
80607 45 80607 50 80607 55 80607 60 80607 65 80607 70 80607 75 80607 85 80607 90 80607 91 80607 96 80699 06 80699 07 80699 09 80699 35 80699 40 80699 43 82621 00 82621 00 82640 00 82640 00 87064 01 87064 02 87068 00 87634 70 87664 02 87664 03 87664 04 87664 05 87664 06 87664 07 87664 08 87664 09 87664 10 87664 11 87664 12 87664 45 87665 02 87665 03 87665 04 87665 05 87665 06 87665 07 87665 08 87665 09 87665 10 87665 11 87665 12
65 65 65 65 65 65 65 65 65 65 65 63 62 63 63 62 62 66 66 66 66 62 63 64 64 62 62 62 62 62 62 62 62 62 62 62 62 63 63 63 63 63 63 63 63 63 63 63
87665 13 87665 14 87665 15 87665 16 87665 18 87665 20 87665 30 87665 45 87665 50 87665 60 87665 70 87667 02 87667 03 87667 04 87667 05 87667 06 87667 07 87667 08 87667 09 87667 10 87667 30 87667 60 87668 02 87668 03 87668 04 87668 05 87668 06 87668 07 87668 08 87668 09 87668 10 87668 12 87668 14 87668 16 87668 18 87668 20 87668 81 87668 82 87668 83 87668 84 87668 85 87668 86 87668 87 87695 01 87695 02 AMB 200 GZ AMB 300 GZ AMB 450 GZ
63 63 63 63 63 63 63 63 63 63 63 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 62 62 24 24 24
1 1 1 1 1 1 1 1 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10 5 1 20 20 10 5 20 10 1 1 1
AMB 600 GZ AMB 750 GZ AMB 900 GZ BCV 200 300R GX BCV 200 300R SX BCV 300 300R GX BCV 300 300R SX BCV 450 300R GX BCV 450 300R SX BCV 600 300R GX BCV 600 300R SX BCV 750 300R GX BCV 750 300R SX BCV 900 300R GX BCV 900 300R SX CV 200 GX CV 200 SX CV 300 GX CV 300 SX CV 450 GX CV 450 SX CV 600 GX CV 600 SX CV 750 GX CV 750 SX CV 900 GX CV 900 SX CVSTIFF 750 G CVSTIFF 750 S CVSTIFF 900 G CVSTIFF 900 S DO 200 GZ DO 200 SZ DO 300 GZ DO 300 SZ DO 450 GZ DO 450 SZ DO 600 GZ DO 600 SZ DO 750 GZ DO 750 SZ DO 900 GZ DO 900 SZ EAR 200 GZ EAR 300 GZ EAR 450 GZ EAR 600 GZ EAR 750 GZ
24 32 32 23 43 23 43 23 43 23 43 31 49 31 49 22 42 22 42 22 42 22 42 30 48 30 48 33 51 33 51 24 44 24 44 24 44 24 44 32 50 32 50 38 38 38 38 38
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
EAR 900 GZ EB 200 300R G EB 300 300R G EB 450 300R G EB 600 300R G EB 750 300R G EB 900 300R G EB GZ EC GZ EDV GX EE GZ EEC EF G EFB 200 45 300 G EFB 200 90 300 G EFB 300 45 300 G EFB 300 90 300 G EFB 450 45 300 G EFB 450 90 300 G EFB 600 45 300 G EFB 600 90 300 G EFB 750 45 300 G EFB 750 90 300 G EFB 900 45 300 G EFB 900 90 300 G EFC GZ EH GZ EIR 200 90 300 G EIR 300 90 300 G EIR 450 90 300 G EIR 600 90 300 G EIR 750 90 300 G EIR 900 90 300 G EIRC 200 90 300 GX EIRC 300 90 300 GX EIRC 450 90 300 GX EIRC 600 90 300 GX EIRC 750 90 300 GX EIRC 900 90 300 GX EJ G EL 200 G 6M EL 300 G 6M EL 450 G 6M EL 600 G 6M EL 750 G 6M EL 900 G 6M EN GZ EOR 200 90 300 G
38 37 37 37 37 37 37 67 38 38 38 38 67 36 36 36 36 36 36 36 36 36 36 36 36 38 38 37 37 37 37 37 37 37 37 37 37 37 37 67 36 36 36 36 36 36 67 37
1 1 1 1 1 1 1 1 1 1 1 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10 1 1 1 1 1 1 1 1
Ref.no.
Page Pack.
Ref.no.
Page Pack.
Ref.no.
Page Pack.
Ref.no.
Page Pack.
Ref.no.
Page Pack.
EOR 300 90 300 G EOR 450 90 300 G EOR 600 90 300 G EOR 750 90 300 G EOR 900 90 300 G EORC 200 90 300 GX EORC 300 90 300 GX EORC 450 90 300 GX EORC 600 90 300 GX EORC 750 90 300 GX EORC 900 90 300 GX EP GZ ER 100 GZ ER 150 GZ ER 50 GZ ER 75 GZ ET 200 300R G ET 300 300R G ET 450 300R G ET 600 300R G ET 750 300R G ET 900 300R G ETB GZ EV GZ EWSB GZ FBCV 200 45 300 GX FBCV 200 45 300 SX FBCV 200 90 300 GX FBCV 200 90 300 SX FBCV 300 45 300 GX FBCV 300 45 300 SX FBCV 300 90 300 GX FBCV 300 90 300 SX FBCV 450 45 300 GX FBCV 450 45 300 SX FBCV 450 90 300 GX FBCV 450 90 300 SX FBCV 600 45 300 GX FBCV 600 45 300 SX FBCV 600 90 300 GX FBCV 600 90 300 SX FBCV 750 45 300 GX FBCV 750 45 300 SX FBCV 750 90 300 GX FBCV 750 90 300 SX FBCV 900 45 300 GX FBCV 900 45 300 SX FBCV 900 90 300 GX FBCV 900 90 300 SX FL2 HTH 200 G HTH 200 S HTH 300 G
37 37 37 37 37 37 37 37 37 37 37 67 38 38 38 38 37 37 37 37 37 37 38 38 67 22 42 22 42 22 42 22 42 22 42 22 42 22 42 22 42 30 48 30 48 30 48 30 48 66 66 68 66
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
HTH 300 S HTH 450 G HTH 450 S HTH 600 G HTH 600 S LF G M10 LF S M10 LFCC G M8 LFCC S M8 LFCOV G M6 LFCOV S M6 LFDV G M6 LFDV S M6 LTH 225 G LTH 300 G LTH 450 G M GZ M SZ MP GZ MP SZ OAMB 200 GZ OAMB 300 GZ OAMB 450 GZ OB GZ OC GZ ODV GX OEC OF G OFAST G OFB 200 90 300 G OFB 300 90 300 G OFB 450 90 300 G OH GZ OIR 200 90 300 G OIR 300 90 300 G OIR 450 90 300 G OJ G OL 200 G OL 300 G OL 450 G OOR 200 90 300 G OOR 300 90 300 G OOR 450 90 300 G ORB GZ OT 200 300R G OT 300 300R G OT 450 300R G OV GZ OWSB GZ PAR 200 GZ PAR 200 SZ PAR 300 GZ PAR 300 SZ
68 66 68 66 68 25 45 24 44 25 45 21 45 66 66 66 25 45 20 44 20 20 20 67 20 20 21 67 21 20 20 20 20 20 20 20 67 20 20 20 20 20 20 66 20 20 20 21 67 32 50 32 50
1 1 1 1 1 50 30 30 30 50 50 100 100 1 1 1 1 50 1 1 1 1 1 1 1 1 10 10 1 1 1 1 1 1 1 1 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
PAR 450 GZ PAR 450 SZ PAR 600 GZ PAR 600 SZ PAR 750 GZ PAR 750 SZ PAR 900 GZ PAR 900 SZ PB 200 300R G PB 200 300R S PB 300 300R G PB 300 300R S PB 450 300R G PB 450 300R S PB 600 300R G PB 600 300R S PB 750 300R G PB 750 300R S PB 900 300R G PB 900 300R S PB GZ PB SZ PC GZ PC SZ PDV GX PDV SX PE GZ PE SZ PEC PF G PF S PFB 200 45 300 G PFB 200 45 300 S PFB 200 90 300 G PFB 200 90 300 S PFB 300 45 300 G PFB 300 45 300 S PFB 300 90 300 G PFB 300 90 300 S PFB 450 45 300 G PFB 450 45 300 S PFB 450 90 300 G PFB 450 90 300 S PFB 600 45 300 G PFB 600 45 300 S PFB 600 90 300 G PFB 600 90 300 S PFB 750 45 300 G PFB 750 45 300 S PFB 750 90 300 G PFB 750 90 300 S PFB 900 45 300 G PFB 900 45 300 S
32 50 32 50 32 50 32 50 31 49 31 49 31 49 31 49 31 49 31 49 67 69 32 50 32 50 32 50 32 67 69 30 48 30 48 30 48 30 48 30 48 30 48 30 48 30 48 30 48 30 48 30 48
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
PFB 900 90 300 G PFB 900 90 300 S PFC GZ PFC SZ PFIN SZ PH GZ PH SZ PIR 200 90 300 G PIR 200 90 300 S PIR 300 90 300 G PIR 300 90 300 S PIR 450 90 300 G PIR 450 90 300 S PIR 600 90 300 G PIR 600 90 300 S PIR 750 90 300 G PIR 750 90 300 S PIR 900 90 300 G PIR 900 90 300 S PIRC 200 90 300 GX PIRC 200 90 300 SX PIRC 300 90 300 GX PIRC 300 90 300 SX PIRC 450 90 300 GX PIRC 450 90 300 SX PIRC 600 90 300 GX PIRC 600 90 300 SX PIRC 750 90 300 GX PIRC 750 90 300 SX PIRC 900 90 300 GX PIRC 900 90 300 SX PJ G PJ S PJIN SZ PL 200 G PL 200 G 6M PL 200 S PL 300 G PL 300 G 6M PL 300 S PL 450 G PL 450 G 6M PL 450 S PL 600 G PL 600 G 6M PL 600 S PL 750 G PL 750 G 6M PL 750 S PL 900 G PL 900 G 6M PL 900 S PLFEB
30 48 32 50 69 32 50 31 49 31 49 31 49 31 49 31 49 31 49 31 49 31 49 31 49 31 49 31 49 31 49 67 69 69 30 30 48 30 30 48 30 30 48 30 30 48 30 30 48 30 30 48 25
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10
PN 060 PN 060 G PN 060 S PN 061 PN 061 G PN 061 S PN 062 PN 062 G PN 062 S PN 080 PN 080 G PN 080 S PN 081 PN 081 G PN 081 S PN 082 PN 082 G PN 082 S PN 100 PN 100 G PN 100 S PN 101 PN 101 G PN 101 S PN 102 PN 102 G PN 102 S PN 120 PN 120 G PN 120 S PN 121 PN 121 G PN 121 S PN 122 PN 122 G PN 122 S PN GZ PN SZ POR 200 90 300 G POR 200 90 300 S POR 300 90 300 G POR 300 90 300 S POR 450 90 300 G POR 450 90 300 S POR 600 90 300 G POR 600 90 300 S POR 750 90 300 G POR 750 90 300 S POR 900 90 300 G POR 900 90 300 S PORC 200 90 300 GX PORC 200 90 300 SX PORC 300 90 300 GX
76 77 78 76 77 78 76 77 78 76 77 78 76 77 78 76 77 78 76 77 78 76 77 78 76 77 78 76 77 78 76 77 78 76 77 78 67 69 31 49 31 49 31 49 31 49 31 49 31 49 31 49 31
100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
10
Ref.no.
Page Pack.
Ref.no.
Page Pack.
Ref.no.
Page Pack.
Ref.no.
Page Pack.
Ref.no.
Page Pack.
PORC 300 90 300 SX PORC 450 90 300 GX PORC 450 90 300 SX PORC 600 90 300 SX PORC 600 90 400 GX PORC 750 90 300 GX PORC 750 90 300 SX PORC 900 90 300 GX PORC 900 90 300 SX PP GZ PP SZ PR 100 GZ PR 100 SZ PR 150 GZ PR 150 SZ PR 50 GZ PR 50 SZ PR 75 GZ PR 75 SZ PT 200 300R G PT 200 300R S PT 300 300R G PT 300 300R S PT 450 300R G PT 450 300R S PT 600 300R G PT 600 300R S PT 750 300R G PT 750 300R S PT 900 300R G PT 900 300R S PTB GZ PTB SZ PV GZ PV SZ PWSB GZ PWSB SZ SB 501 SB 501 S SB 502 SB 502 S SB 504 SB 504 S SB 505 SB 505 S SB 50612 SB 50612 S SB 507 SB 507 S SB 508 SB 508 S SB 509 SB 509 S
49 31 49 49 31 31 49 31 49 67 69 32 50 32 50 32 50 32 50 31 49 31 49 31 49 31 49 31 49 31 49 32 50 32 50 67 69 77 78 77 78 77 78 77 78 77 78 77 78 77 78 77 78
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
SB 511 SB 511 S SB 512 SB 512 S SB 513 SB 513 S SB 514 SB 514 S SB 515 SB 515 S SB 516 SB 516 S SB 517 SB 517 S SB 524 SB 524 S SB 600 SB 600 S SB 603 SB 603 S SB 650 SB 650 S SB 651 SB 651 S SB 700 SB 700 S SB 703 SB 703 S SB 704 SB 704 S SB 705 SB 705 S SC 200 3M SC 200 3M G SC 200 3M S SC 203 3M SC 203 3M G SC 203 3M S SC 400 3M SC 400 3M G SC 400 3M S SC 401 3M G SC 401 3M S SC 403 3M SC 403 3M G SC 403 3M S SC 850 SC 850 S SC 851 SC 851 S SC 85241 SC 85241 S SC 853
77 78 77 78 77 78 77 78 77 78 77 78 77 78 77 78 77 78 77 78 77 78 77 78 77 78 77 78 77 78 77 78 76 77 78 76 77 78 76 77 78 77 78 76 77 78 77 78 77 78 77 78 77
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
SC 853 S SC 855 SC 855 S SC 856 SC 856 S SC 950 W SC 951 W SC 952 TCV 200 300R GX TCV 200 300R SX TCV 300 300R GX TCV 300 300R SX TCV 450 300R GX TCV 450 300R SX TCV 600 300R GX TCV 600 300R SX TCV 750 300R GX TCV 750 300R SX TCV 900 300R GX TCV 900 300R SX ZAR 200 GZ ZAR 200 SZ ZAR 300 GZ ZAR 300 SZ ZAR 450 GZ ZAR 450 SZ ZAR 600 GZ ZAR 600 SZ ZB 200 300R G ZB 200 300R S ZB 300 300R G ZB 300 300R S ZB 450 300R G ZB 450 300R S ZB 600 300R G ZB 600 300R S ZB GZ ZB SZ ZC GZ ZC SZ ZDV GX ZDV SX ZE GZ ZE SZ ZEC ZF G ZF S ZFB 200 45 300 G ZFB 200 45 300 S ZFB 200 90 300 G ZFB 200 90 300 S ZFB 300 45 300 G ZFB 300 45 300 S
78 77 78 77 78 76 76 76 23 43 23 43 23 43 23 43 31 49 31 49 24 44 24 44 24 44 24 44 23 43 23 43 23 43 23 43 67 69 24 44 24 44 24 44 24 67 69 22 42 22 42 22 42
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10 10 1 1 1 1 1 1 1
ZFB 300 90 300 G ZFB 300 90 300 S ZFB 450 45 300 G ZFB 450 45 300 S ZFB 450 90 300 G ZFB 450 90 300 S ZFB 600 45 300 G ZFB 600 45 300 S ZFB 600 90 300 G ZFB 600 90 300 S ZFC GZ ZFC SZ ZFIN SZ ZH GZ ZH SZ ZIR 200 90 300 G ZIR 200 90 300 S ZIR 300 90 300 G ZIR 300 90 300 S ZIR 450 90 300 G ZIR 450 90 300 S ZIR 600 90 300 G ZIR 600 90 300 S ZIRC 200 90 300 GX ZIRC 200 90 300 SX ZIRC 300 90 300 GX ZIRC 300 90 300 SX ZIRC 450 90 300 GX ZIRC 450 90 300 SX ZIRC 600 90 300 GX ZIRC 600 90 300 SX ZJ G ZJ S ZJIN SZ ZL 200 G ZL 200 S ZL 300 G ZL 300 S ZL 450 G ZL 450 S ZL 600 G ZL 600 S ZN GZ ZN SZ ZOR 200 90 300 G ZOR 200 90 300 S ZOR 300 90 300 G ZOR 300 90 300 S ZOR 450 90 300 G ZOR 450 90 300 S ZOR 600 90 300 G ZOR 600 90 300 S ZORC 200 90 300 GX
22 42 22 42 22 42 22 42 22 42 24 44 69 24 44 23 43 23 43 23 43 23 43 23 43 23 43 23 43 23 43 67 69 69 22 42 22 42 22 42 22 42 67 69 23 43 23 43 23 43 23 43 23
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
ZORC 200 90 300 SX ZORC 300 90 300 GX ZORC 300 90 300 SX ZORC 450 90 300 GX ZORC 450 90 300 SX ZORC 600 90 300 GX ZORC 600 90 300 SX ZP GZ ZP SZ ZR 100 GZ ZR 100 SZ ZR 150 GZ ZR 150 SZ ZR 50 GZ ZR 50 SZ ZR 75 GZ ZR 75 SZ ZRB GZ ZRB SZ ZT 200 300R G ZT 200 300R S ZT 300 300R G ZT 300 300R S ZT 450 300R G ZT 450 300R S ZT 600 300R G ZT 600 300R S ZTB GZ ZTB SZ ZV GZ ZV SZ ZWSB GZ ZWSB SZ
43 23 43 23 43 23 43 67 69 24 44 24 44 24 44 24 44 66 68 23 43 23 43 23 43 23 43 24 44 24 44 67 69
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
11
]
INDUSTRIAL LADDER
Programme
Maximum span Heights Widths Lengths Material/finishing
2,5 m
50 mm
3000 mm
4,5 m
100 mm
3000 mm
6m
125 mm
3000 mm 6000 mm
8m
150 mm
6000 mm
LIGHT DUTY H = 50 mm
22 12 50 28 W 100 70 W
22 95 125 W 120
22
150
12
Characteristics
Integral coupler on all fittings Integral coupler on straight lengths on Light duty ladder
WITH FASTENERS
Return flange on fittings All couplers are supplied with fasteners Standard 45 & 90
One coherent system, 4 applications: Light duty, Medium duty, Heavy duty and Extra heavy duty. Complete range of fittings, accessories and support systems. Return flange on lengths and fittings provides extra strength and avoids sharp edges. For all environments there is a solution: hot dip galvanised and Stainless Steel 316L. Stainless Steel 316 L: all components are pickled and passivated as a standard, offering the best possible corrosion resistance and perfect optical quality. Available in 3 and 6 meter lengths.
Multiple radii: 300 mm as standard, bigger radii on request. Multiple angles: 45 and 90 degree bends. Time saving integral couplers on the fittings. Integral coupler on the Light Duty Ladder. Continuous perforation pattern, possible to cut on every part of the ladder and no need for drilling.
Standards
Loading graphs are in compliance with standard IEC 61537 (type 1) Hot dip galvanised in accordance with NEN EN 1461, minimum average zinc thickness is 55 m.
13
]
INDUSTRIAL LADDER
Loading graphs
Type of ladder:
The quantity and diameter of the cables to be installed, and the desired spare capacity for future additions determine the required space in a cable management system. Here are some guidelines to determine the space needed for cables. In the table to the right, an indication of the diameters and required area (in cm) is given. This is the space that needs to be available in the cable tray or ladder. When the quantity of each type of cable is known, the total cross section of the cable ladder can easily be calculated . Example: When 30 cables 4 x 10 mm and 10 cables 5 x 35 mm are foreseen, the required cross section can be calculated as 30 x 3 cm and 10 x 10 cm = 190 cm. Obviously, when large numbers of cables have to be installed, it may be necessary to use more than one ladder in a parallel or multi level configuration.
diameter (mm) 9 10 13 17 20 26 30 34 40 45
required cross cable weight section (cm) (N/m) 1,0 1,2 1,6 3,0 4,0 7,0 10,0 12,5 17,0 22,0 1,3 1,7 3,1 6,1 8,9 16,5 21,4 28,6 40,3 55,8
(This table is only for indication, for exact sizes and weights, please consult the cable manufacturers specifications.)
The practical capacity of cable trays is found by multiplying the height and width (in cm). For cable ladders you have to allow for a slight reduction of cross section due to the space that is taken by the rungs. The images and table below show the inside dimensions and available space inside each type of cable ladder. Example: medium duty ladder H 100 has an internal height of 7 cm.
14
Usable cable height for cables 120 mm Usable cable height for cables 95 mm Usable cable height for cables 70 mm 100 mm Usable cable height for cables 30 mm 50 mm 125 mm 150 mm
Width Type Light duty Medium duty Heavy duty Extra heavy duty
cm2 of cable area
600
750
900
Cable weight
The load on a cable ladder is a result of the quantity and diameter of the cables. The table above indicates the cross section and the specific weight of some cables types in N per meter. (1 N = 0,1 kg) Multiplication of all cables and their specific weight will result in the total weight per meter of ladder. In the same example configuration as above: 30 cables 4 x 10 mm and 10 cables 5 x 35 mm = 30 x 6,1 + 10 x 21,4 N/m = 397 N/m If the quantity and type of cables is not (yet) known, you can apply as a rule of thumb the maximum practical cable weight of 2,5 N/m per cm of ladder cross section.
Example: a cable ladder with a height of 10 cm and a width of 30 cm, has an internal cross section of 7 x 30 = 210 cm. In this ladder the maximum practical weight of cables will not exceed 210 x 2,5 N/m = 525 N/m.
15
]
INDUSTRIAL LADDER
Loading graphs
The graphs show the safe working load and maximum span for each ladder type, as well as the deflection of the ladder at a given load and span. Example: Ladder H = 100 mm (so internal height = 7 cm), width 600 mm. According to paragraph 2, we can estimate the practical cable load as: 7 x 60 = 420 cm x 2.5 N/m = 1050 N/m The loading graph of mediuym duty ladder H = 100 shows, that for a load of 1050 N/m the maximum span is 4,5 meter (green line). At this span and load, the longitudinal deflection of the ladder is about 16 mm. The IEC 61537 standard allows a maximum longitudinal deflection of 1% of the span, in this case a deflection of 45 mm would have been allowed.
The products of Legrand that fall under the EC harmonisation guideline Low Voltage Directive 93/68/EEC are provided with the CE Marking as proof that they have been developed and produced in accordance with this guideline. A written declaration of conformity for each product or system can be obtained from the manufacturer. Legrand reserves the right to technically refine, change or improve its products if necessary. The dimensions mentioned in the catalogue can be changed without notice. We advise you to ask for the detailed information at our sales office if dimensions are essential.
16
SWL N/m
SWL N/m
Deflection mm
SWL N/m
Deflection mm
Deflection mm
Deflection mm
SWL N/m
2500
Deflection mm
3000
SWL N/m
40 30 20 10 0
SWL N/m
2500
50
SWL N/m
Deflection mm
SWL N/m
Deflection mm
* Heavy duty ladder H 125: For spans of more than 4,5 meters, the ladder length of 6 m must be used.
General notes: - It is not allowed to: - Walk across a cable ladder installation - Let ladders, scaffolding or other objects lean on a cable ladder installation - The loads shown in all graphs are the safe recommended maximum loads that can be applied and must include wind, snow and any other external forces in addition to the cable load - Fittings do not need separate supporting (unless W > 600 mm)
Deflection mm
17
LIGHT DUTY H = 50 mm LADDER LIGHT DUTY H = 50 mm Width (mm) Straight length Flat bend 90 Inside riser 90 FITTINGS Outside riser 90 Equal tee
Length 3000 mm
Please note that one item OFAST G consists of 20 fasteners M6 x 16 (1) Only where ladder has been cut to length. When joining a cut length to an uncut length or an accessory only one coupler is required
LIGHT DUTY H = 50 mm
12 50 28 W
Light duty coupling (cut lengths only) OR ACCESSORY Cut the side rail at the joggle joint 100 mm longer than the required length. Locate the joggle end of a straight lenght or accessory in the side rail of the cut lenght and butt join the opposite side rails. Secure the joggle joint. Fit a coupler to the outside of the butt joined side rails across the joint. Adjust the coupler position to align the slots with the side rail slots and secure it with the fastenings.
CUT LENGTH
100
BUTT JOINT
Note: because of integrated coupler the effective length of a light duty cable ladder is 2900 mm
18
HDG
HDG
50 100 50
LIGHT DUTY H = 50 mm ACCESSORIES Coupler set
(1)
Straight divider 3 m
Bendable connectors
End cap
OC GZ OC GZ OC GZ
SUPPLIED IN PAIRS WITH FASTENERS
MP GZ MP GZ MP GZ
CKET SUPPLIED WITH BRA ERS TO LADDER FASTEN
OH GZ OH GZ OH GZ
SUPPLIED IN PAIRS WITH FASTENERS
OV GZ OV GZ OV GZ
SUPPLIED IN SET WITH FASTENERS
Packaging
Ref.no.
Fastenings
Supplied in packs to couple five joints Pack consists of: - M6 x 16 set screws 20 off - M6 nuts 20 off - M6 roofing washers 40 off - M6 shakeproof washers 20 off Divider fixing set M6
OFAST G
100
LFDV G M6
19
HDG
50
Ladder length OL 300 G
Selection chart (page 18) Dimensions and technical information (page 52) Integral couplers on straight lengths and fittings enable joints to be made quickly and easily, thereby reducing installation time Rung spacing : 300 mm between centres Standard radius for fittings : 300 mm
Packaging Ref.no. Packaging Ref.no.
Accessories
Coupler set Supplied in pairs with fastenings Required only where ladder has been cut to length. When joining a cut length to an uncut length or an accessory only one coupler is required Ancillary mounting bracket Supplied singly with bracket to ladder fasteners
Width
OC GZ
Straight length
Integral couplers, only need fastenings M6 x 16 (OFAST G)
Width Length
1 1 1
Fittings
Integral couplers, only need fastenings M6 x 16 (OFAST G) Flat bend 90
Width
1 1 1
200 mm 300 mm 450 mm Ancillary mounting plate Supplied singly with bracket to ladder fasteners For rung mounting or side rail mounting Straight divider 3 m To be fixed with 10 fixings M6 (ref.no. LFDV G M6)
1 1 1
OFB 200 90 300 G 200 mm OFB 300 90 300 G 300 mm OFB 450 90 300 G 450 mm 1 MP GZ Inside riser 90 OIR 200 90 300 G 200 mm OIR 300 90 300 G 300 mm OIR 450 90 300 G 450 mm Outside riser 90 OOR 200 90 300 G 200 mm OOR 300 90 300 G 300 mm OOR 450 90 300 G 450 mm Equal tee 200 mm 300 mm 450 mm
1 1 1
ODV GX
1 1 1
OH GZ
1 1 1
Bendable connectors Supplied in pairs with fasteners For fabricating accessories on site to make up bends, reducers and compensate for misalignment of straight lengths
20
HDG
50
CABLE LADDER
>>>
Accessories (continued)
Vertical hinged connectors Supplied in sets comprising four plates and fasteners Use with straight lengths to form risers or solve minor misalignment problems on site
OV GZ
10
OEC
Fastenings
1 OFAST G Supplied in packs to couple five joints Pack consists of: - M6 x 16 set screws 20 off - M6 nuts 20 off - M6 roofing washers 40 off - M6 shakeproof washers 20 off Divider fixing set M6
100
LFDV G M6
Coupling detail
FLAT BEND TO STRAIGHT LENGTH BOLTING Note: When bolting cut ends where the joggle end has been removed use coupler OC.
A M6x16 setscrew D Joggle end B M6 washer E M6 shakeproof washer C Side rail F M6 nut
Light to handle
21
MEDIUM DUTY H = 100 mm LADDER Width (mm) Straight length Cover straight length Flat bend 45 Cover flat bend 45 FITTINGS Flat bend 90 Cover flat bend 90 Inside riser 90
Length 3000 mm
Length 3000 mm
ZFB 200 45 300 G ZFB 300 45 300 G ZFB 450 45 300 G ZFB 600 45 300 G
8x Ref.nr. LF G M10
FBCV 200 45 300 GX FBCV 300 45 300 GX FBCV 450 45 300 GX FBCV 600 45 300 GX
5x LFCC G M8 600 mm: + 4x LFCOV G M6
ZFB 200 90 300 G ZFB 300 90 300 G ZFB 450 90 300 G ZFB 600 90 300 G
8x Ref.nr. LF G M10
FBCV 200 90 300 GX FBCV 300 90 300 GX FBCV 450 90 300 GX FBCV 600 90 300 GX
5x LFCC G M8 600 mm: + 4x LFCOV G M6
ZIR 200 90 300 G ZIR 300 90 300 G ZIR 450 90 300 G ZIR 600 90 300 G
8x Ref.nr. LF G M10
MEDIUM DUTY H = 100 mm ACCESSORIES Width (mm) Straight couplers Fitting to fitting couplers Bendable connectors Straight divider 3 m Cover fixing set Flexible expansion Vertical hinged couplers connectors
P OP TO T
ZC GZ ZC GZ ZC GZ ZC GZ
SUPPLIED IN PAIRS WITH FASTENERS
ZH GZ ZH GZ ZH GZ ZH GZ
SUPPLIED IN PAIRS WITH FASTENERS
ZE GZ ZE GZ ZE GZ ZE GZ
SUPPLIED IN PAIRS WITH FASTENERS
ZV GZ ZV GZ ZV GZ ZV GZ
SUPPLIED IN PAIRS WITH FASTENERS
22 70 W
100
22
HDG
HDG
50 100
MEDIUM DUTY H = 100 mm FITTINGS Cover inside riser 90 Outside riser 90 Cover outside riser 90 Equal tee Cover equal tee Branch piece Cover branch piece
ZIRC 200 90 300 GX ZIRC 300 90 300 GX ZIRC 450 90 300 GX ZIRC 600 90 300 GX
4x LFCC G M8 600 mm: + 4x LFCOV G M6
ZOR 200 90 300 G ZOR 300 90 300 G ZOR 450 90 300 G ZOR 600 90 300 G
8x Ref.nr. LF G M10
ZORC 200 90 300 GX ZORC 300 90 300 GX ZORC 450 90 300 GX ZORC 600 90 300 GX
4x LFCC G M8 600 mm: + 4x LFCOV G M6
TCV 200 300R GX TCV 300 300R GX TCV 450 300R GX TCV 600 300R GX
7x LFCC G M8 600 mm: + 4x LFCOV G M6
BCV 200 300R GX BCV 300 300R GX BCV 450 300R GX BCV 600 300R GX
4x LFCC G M8 600 mm: + 4x LFCOV G M6
MEDIUM DUTY H = 100 mm ACCESSORIES Articulated riser Dropout plate Short reducer bracket
Y
End cap
MP GZ MP GZ MP GZ MP GZ
CKET SUPPLIED WITH BRA ERS TO LADDER FASTEN
M GZ M GZ M GZ M GZ
SUPPLIED IN PAIRS WITH FASTENERS
(1) Short reducer bracket Supplied singly with fasteners Use to form a reducer on site Straight reducer use in pairs Offset reducer use singly with straight coupler To calculate (Y) for straight reducers and offset reducers
Y W K Y K
Packaging
Ref.no.
Fastenings
Fixing set M10 x 20 Cover fixing set M8 Overlap fixing set M6 Divider fixing set M6
50 30 50
Y W
100
23
HDG
100
Ladder length ZL 300 G Flat bend ZFB 300 90 300 G Inside riser ZIR 300 90 300 G
Selection chart (page 22) Dimensions and technical information (page 52)
When connecting fittings to straight lengths, use fastener sets (see below) Rung spacing : 300 mm between centres Standard radius for fittings : 300 mm
Packaging Ref.no.
Packaging
Ref.no.
Fittings
Flat bend 45 To be fixed with 8 fixing sets (ref.no. LF G M10)
Width
Straight length
Width Length
1 1 1 1
1 1 1 1
ZFB 200 45 300 G ZFB 300 45 300 G ZFB 450 45 300 G ZFB 600 45 300 G
200 mm 300 mm 450 mm 600 mm Cover flat bend 45 To be fixed with 5 Cover fixing sets (ref.no. LFCC G M8) 200 mm 300 mm 450 mm 600 mm(1) Flat bend 90 To be fixed with 8 fixing sets (ref.no. LF G M10) 200 mm 300 mm 450 mm 600 mm Cover flat bend 90 To be fixed with 5 Cover fixing sets (ref.no. LFCC G M8) 200 mm 300 mm 450 mm 600 mm(1)
1 1 1 1
1 1 1 1
FBCV 200 45 300 GX FBCV 300 45 300 GX FBCV 450 45 300 GX FBCV 600 45 300 GX
1 1 1 1
ZFB 200 90 300 G ZFB 300 90 300 G ZFB 450 90 300 G ZFB 600 90 300 G
1 1 1 1
FBCV 200 90 300 GX FBCV 300 90 300 GX FBCV 450 90 300 GX FBCV 600 90 300 GX
(1) Interlock 600 mm wide covers with 4 fixings M6 (ref.no. LFCOV G M6) per joint for additional stability
24
HDG
100
Flexible expansion coupler ZE GZ
Packaging
Ref.no.
Fittings (continued)
Inside riser 90 To be fixed with 8 fixing sets (ref.no. LF G M10)
Width
Packaging
Ref.no.
Fittings (continued)
Equal tee To be fixed with 12 fixing sets (ref.no. LF G M10)
Width
1 1 1 1
ZIR 200 90 300 G ZIR 300 90 300 G ZIR 450 90 300 G ZIR 600 90 300 G
200 mm 300 mm 450 mm 600 mm Cover inside riser 90 To be fixed with 4 Cover fixing sets (ref.no. LFCC G M8) 200 mm 300 mm 450 mm 600 mm(1) Outside riser 90 To be fixed with 8 fixing sets (ref.no. LF G M10) 200 mm 300 mm 450 mm 600 mm Cover outside riser 90 To be fixed with 4 Cover fixing sets (ref.no. LFCC G M8) 200 mm 300 mm 450 mm 600 mm(1)
1 1 1 1
200 mm 300 mm 450 mm 600 mm Cover equal tee To be fixed with 7 Cover fixing sets (ref.no. LFCC G M8) 200 mm 300 mm 450 mm 600 mm(1) Branch piece To be fixed with 8 fixing sets (ref.no. LF G M10) 200 mm 300 mm 450 mm 600 mm Cover branch piece To be fixed with 4 Cover fixing sets (ref.no. LFCC G M8) 200 mm 300 mm 450 mm 600 mm(1)
1 1 1 1
ZIRC 200 90 300 GX ZIRC 300 90 300 GX ZIRC 450 90 300 GX ZIRC 600 90 300 GX
1 1 1 1
TCV 200 300R GX TCV 300 300R GX TCV 450 300R GX TCV 600 300R GX
1 1 1 1
ZOR 200 90 300 G ZOR 300 90 300 G ZOR 450 90 300 G ZOR 600 90 300 G
1 1 1 1
1 1 1 1
ZORC 200 90 300 GX ZORC 300 90 300 GX ZORC 450 90 300 GX ZORC 600 90 300 GX
1 1 1 1
BCV 200 300R GX BCV 300 300R GX BCV 450 300R GX BCV 600 300R GX
(1) Interlock 600 mm wide covers with 4 fixings M6 (ref.no. LFCOV G M6) per joint for additional stability
25
HDG
100
Accessories
Straight couplers Supplied in pairs, with fasteners (4 per coupler) Use to couple straight lengths to straight lengths Fitting to fitting couplers Supplied in pairs, with fasteners (4 per coupler) Use to couple fitting to fitting Bendable connectors Supplied in pairs with fasteners For fabricating accessories on site to make up bends, reducers and compensate for misalignment of straight lengths Straight divider 3 m To be fixed with 10 fixings M6 (ref.no. LFDV G M6) 1 1 1 1
P OP TO T
Packaging
Ref.no.
Packaging
Ref.no.
Accessories (continued)
Dropout plate Supplied with fasteners Use to provide local support for cables as they exit a cable ladder run between rungs
Width
ZC GZ
ZFC GZ
1 1 1 1
200 mm 300 mm 450 mm 600 mm Short reducer bracket Supplied singly with fasteners Use to form a reducer on site Straight reducer use in pairs Offset reducer use singly with straight coupler To calculate (Y) for straight reducers and offset reducers
Width Height
ZH GZ
Y W K W
Y K Y
ZDV GX
30
LFCC G M8
ZR 50 GZ ZR 75 GZ ZR 100 GZ ZR 150 GZ
50 mm 75 mm 100 mm 150 mm
ZE GZ
1 1 1 1
200 mm 300 mm 450 mm 600 mm Ancillary mounting plate Supplied singly with bracket to ladder fasteners For rung mounting or side rail mounting Tee brackets Supplied in pairs with fasteners
ZV GZ
Vertical hinged connectors Supplied in sets comprising four plates and fasteners Use with straight lengths to form risers or solve minor misalignment problems on site When used with tee bracket, vertical hinged connectors can offset tee branch Articulated riser Set comprises three ladder sections and the necessary vertical hinged connectors with fasteners Use to form risers or solve most misalignment problems on site
Width Height
MP GZ
ZTB GZ
10
ZEC
1 1 1 1
26
HDG
100
Packaging
Ref.no.
Accessories (continued)
Rail-to-rail dropout brackets Supplied in pairs with fastenings Use to attach a vertical run of ladder or tray beneath a horizontal main ladder run For ladder to ladder connection or Tray to ladder connection
Coupler sets Medium duty (Straight couplers and fitting to fitting couplers)
Supplied in pairs, with fasteners (4 per coupler) Fastener positioning : common to both coupler set types
M GZ
Note : when connecting straight lengths to straight lengths even when ladder is cut to length, the slots in the coupler will always align with slots in the ladder side rail. When bolting to cut ends adjust coupler to ensure 4 bolts can be inserted
10
PLFEB
Fastener position
Connecting fittings with integral coupler to straight lengths
Fastenings
50 30 50 100 LF G M10 LFCC G M8 LFCOV G M6 LFDV G M6 Fixing set M10 x 20 Cover fixing set M8 Overlap fixing set M6 Divider fixing set M6
Tee brackets
Supplied in pairs with fasteners Use to create a straight or 90 branch off a straight ladder run
Couple with vertical hinged connectors or bendable connectors to offset the branch
Main ladder run Medium duty H = 100 mm Heavy duty H = 125 mm Extra heavy duty H = 150 mm
Permitted ladder branch Medium Heavy Extra duty duty heavy duty
PTB PTB
ETB
27
Length 3000 mm
Length 6000 mm
Length 3000 mm
PFB 200 45 300 G PFB 300 45 300 G PFB 450 45 300 G PFB 600 45 300 G PFB 750 45 300 G PFB 900 45 300 G
16x Ref.nr. LF G M10
FBCV 200 45 300 GX FBCV 300 45 300 GX FBCV 450 45 300 GX FBCV 600 45 300 GX FBCV 750 45 300 GX FBCV 900 45 300 GX
5x LFCC G M8 600 - 900 mm: + 4x LFCOV G M6 750 mm: + 2x CVSTIFF 750 G 900 mm: + 2x CVSTIFF 900 G
PFB 200 90 300 G PFB 300 90 300 G PFB 450 90 300 G PFB 600 90 300 G PFB 750 90 300 G PFB 900 90 300 G
16x Ref.nr. LF G M10
FBCV 200 90 300 GX FBCV 300 90 300 GX FBCV 450 90 300 GX FBCV 600 90 300 GX FBCV 750 90 300 GX FBCV 900 90 300 GX
5x LFCC G M8 600 - 900 mm: + 4x LFCOV G M6 750 mm: + 2x CVSTIFF 750 G 900 mm: + 2x CVSTIFF 900 G
HEAVY DUTY H = 125 mm ACCESSORIES Width (mm) Straight couplers Fitting to fitting couplers Bendable connectors Straight divider 3 m Cover fixing set Flexible expansion Vertical hinged couplers connectors
P OP TO T
PC GZ PC GZ PC GZ PC GZ PC GZ PC GZ
SUPPLIED IN PAIRS WITH FASTENERS
PH GZ PH GZ PH GZ PH GZ PH GZ PH GZ
SUPPLIED IN PAIRS WITH FASTENERS
PE GZ PE GZ PE GZ PE GZ PE GZ PE GZ
SUPPLIED IN PAIRS WITH FASTENERS
PV GZ PV GZ PV GZ PV GZ PV GZ PV GZ
SUPPLIED IN PAIRS WITH FASTENERS
22 95 125 W
28
HDG
125
HEAVY DUTY H = 125 mm FITTINGS Inside riser 90 Cover inside riser 90 Outside riser 90 Cover outside riser 90 Equal tee Cover equal tee Branch piece Cover branch piece
PIR 200 90 300 G PIR 300 90 300 G PIR 450 90 300 G PIR 600 90 300 G PIR 750 90 300 G PIR 900 90 300 G
16x Ref.nr. LF G M10
PIRC 200 90 300 GX PIRC 300 90 300 GX PIRC 450 90 300 GX PIRC 600 90 300 GX PIRC 750 90 300 GX PIRC 900 90 300 GX
4x LFCC G M8 600 - 900 mm: + 4x LFCOV G M6 750 mm: + 2x CVSTIFF 750 G 900 mm: + 2x CVSTIFF 900 G
POR 200 90 300 G POR 300 90 300 G POR 450 90 300 G POR 600 90 300 G POR 750 90 300 G POR 900 90 300 G
16x Ref.nr. LF G M10
PORC 200 90 300 GX PORC 300 90 300 GX PORC 450 90 300 GX PORC 600 90 300 GX PORC 750 90 300 GX PORC 900 90 300 GX
4x LFCC G M8 600 - 900 mm: + 4x LFCOV G M6 750 mm: + 2x CVSTIFF 750 G 900 mm: + 2x CVSTIFF 900 G
PT 200 300R G PT 300 300R G PT 450 300R G PT 600 300R G PT 750 300R G PT 900 300R G
24x Ref.nr. LF G M10
TCV 200 300R GX TCV 300 300R GX TCV 450 300R GX TCV 600 300R GX TCV 750 300R GX TCV 900 300R GX
7x LFCC G M8 600 - 900 mm: + 4x LFCOV G M6 750 mm: + 3x CVSTIFF 750 G 900 mm: + 3x CVSTIFF 900 G
PB 200 300R G PB 300 300R G PB 450 300R G PB 600 300R G PB 750 300R G PB 900 300R G
16x Ref.nr. LF G M10
BCV 200 300R GX BCV 300 300R GX BCV 450 300R GX BCV 600 300R GX BCV 750 300R GX BCV 900 300R GX
4x LFCC G M8 600 - 900 mm: + 4x LFCOV G M6 750 mm: + 1x CVSTIFF 750 G 900 mm: + 1x CVSTIFF 900 G
HEAVY DUTY H = 125 mm ACCESSORIES Articulated riser Dropout plate Short reducer bracket
Y
End cap
PAR 200 GZ PAR 300 GZ PAR 450 GZ PAR 600 GZ PAR 750 GZ PAR 900 GZ
SUPPLIED IN SET WITH FASTENERS
AMB 200 GZ AMB 300 GZ AMB 450 GZ AMB 600 GZ AMB 750 GZ AMB 900 GZ
CKET SUPPLIED WITH BRA ERS TO LADDER FASTEN
MP GZ MP GZ MP GZ MP GZ MP GZ MP GZ
CKET SUPPLIED WITH BRA ERS TO LADDER FASTEN
M GZ M GZ M GZ M GZ M GZ M GZ
SUPPLIED IN PAIRS WITH FASTENERS
WITH FASTENERS
(1) Short reducer bracket Supplied singly with fasteners Use to form a reducer on site Straight reducer use in pairs Offset reducer use singly with straight coupler To calculate (Y) for straight reducers and offset reducers
Y W K Y K
Packaging
Ref.no.
Fastenings
Fixing set M10 x 20 Cover fixing set M8 Overlap fixing set M6 Divider fixing set M6 Cover stiffener for covers
Width
50 30 50
Y W
100
1 1
750 mm 900 mm
29
HDG
125
Flat bend Inside riser PIR 300 90 300 G PFB 300 90 300 G
Selection chart (page 28) Dimensions and technical information (page 52) When connecting fittings to straight lengths, use fastener sets (see below) Rung spacing : 300 mm between centres Standard radius for fittings : 300 mm
Packaging Ref.no. Packaging Ref.no.
Fittings
Flat bend 45 To be fixed with 16 fixing sets (ref.no. LF G M10)
Width
Straight length
Width Length
1 1 1 1 1 1 1 1 1 1 1 1
PL 200 G PL 300 G PL 450 G PL 600 G PL 750 G PL 900 G PL 200 G 6M PL 300 G 6M PL 450 G 6M PL 600 G 6M PL 750 G 6M PL 900 G 6M
200 mm 300 mm 450 mm 600 mm 750 mm 900 mm 200 mm 300 mm 450 mm 600 mm 750 mm 900 mm
3000 mm 3000 mm 3000 mm 3000 mm 3000 mm 3000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm
1 1 1 1 1 1
PFB 200 45 300 G PFB 300 45 300 G PFB 450 45 300 G PFB 600 45 300 G PFB 750 45 300 G PFB 900 45 300 G
200 mm 300 mm 450 mm 600 mm 750 mm 900 mm Cover flat bend 45 To be fixed with 5 Cover fixing sets (ref.no. LFCC G M8) 200 mm 300 mm 450 mm 600 mm(1) 750 mm(1)(2) 900 mm(1)(2) Flat bend 90 To be fixed with 16 fixing sets (ref.no. LF G M10) 200 mm 300 mm 450 mm 600 mm 750 mm 900 mm Cover flat bend 90 To be fixed with 5 Cover fixing sets (ref.no. LFCC G M8) 200 mm 300 mm 450 mm 600 mm(1) 750 mm(1)(2) 900 mm(1)(2)
1 1 1 1 1 1
FBCV 200 45 300 GX FBCV 300 45 300 GX FBCV 450 45 300 GX FBCV 600 45 300 GX FBCV 750 45 300 GX FBCV 900 45 300 GX
1 1 1 1 1 1
1 1 1 1 1 1
PFB 200 90 300 G PFB 300 90 300 G PFB 450 90 300 G PFB 600 90 300 G PFB 750 90 300 G PFB 900 90 300 G
1 1 1 1 1 1
FBCV 200 90 300 GX FBCV 300 90 300 GX FBCV 450 90 300 GX FBCV 600 90 300 GX FBCV 750 90 300 GX FBCV 900 90 300 GX
(1) Interlock 600, 750 and 900 mm wide covers with 4 fixings M6 (ref.no. LFCOV G M6) per joint for additional stability (2) For covers 750 and 900 mm wide, use cover stiffeners CVSTIFF for extra rigidity
30
HDG
125
Packaging
Ref.no.
Fittings (continued)
Inside riser 90 To be fixed with 16 fixing sets (ref.no. LF G M10)
Width
Packaging
Ref.no.
Fittings (continued)
Equal tee To be fixed with 24 fixing sets (ref.no. LF G M10)
Width
1 1 1 1 1 1
PIR 200 90 300 G PIR 300 90 300 G PIR 450 90 300 G PIR 600 90 300 G PIR 750 90 300 G PIR 900 90 300 G
200 mm 300 mm 450 mm 600 mm 750 mm 900 mm Cover inside riser 90 To be fixed with 4 Cover fixing sets (ref.no. LFCC G M8) 200 mm 300 mm 450 mm 600 mm(1) 750 mm(1)(2) 900 mm(1)(2) Outside riser 90 To be fixed with 16 fixing sets (ref.no. LF G M10) 200 mm 300 mm 450 mm 600 mm 750 mm 900 mm Cover outside riser 90 To be fixed with 4 Cover fixing sets (ref.no. LFCC G M8) 200 mm 300 mm 450 mm 600 mm(1) 750 mm(1)(2) 900 mm(1)(2)
1 1 1 1 1 1
PT 200 300R G PT 300 300R G PT 450 300R G PT 600 300R G PT 750 300R G PT 900 300R G
200 mm 300 mm 450 mm 600 mm 750 mm 900 mm Cover equal tee To be fixed with 7 Cover fixing sets (ref.no. LFCC G M8) 200 mm 300 mm 450 mm 600 mm(1) 750 mm(1)(2) 900 mm(1)(2) Branch piece To be fixed with 16 fixing sets (ref.no. LF G M10) 200 mm 300 mm 450 mm 600 mm 750 mm 900 mm Cover branch piece To be fixed with 4 Cover fixing sets (ref.no. LFCC G M8) 200 mm 300 mm 450 mm 600 mm(1) 750 mm(1)(2) 900 mm(1)(2)
1 1 1 1 1 1
PIRC 200 90 300 GX PIRC 300 90 300 GX PIRC 450 90 300 GX PIRC 600 90 300 GX PIRC 750 90 300 GX PIRC 900 90 300 GX
1 1 1 1 1 1
TCV 200 300R GX TCV 300 300R GX TCV 450 300R GX TCV 600 300R GX TCV 750 300R GX TCV 900 300R GX
1 1 1 1 1 1
POR 200 90 300 G POR 300 90 300 G POR 450 90 300 G POR 600 90 300 G POR 750 90 300 G POR 900 90 300 G
1 1 1 1 1 1
PB 200 300R G PB 300 300R G PB 450 300R G PB 600 300R G PB 750 300R G PB 900 300R G
1 1 1 1 1 1
PORC 200 90 300 GX PORC 300 90 300 GX PORC 450 90 300 GX PORC 600 90 300 GX PORC 750 90 300 GX PORC 900 90 300 GX
1 1 1 1 1 1
BCV 200 300R GX BCV 300 300R GX BCV 450 300R GX BCV 600 300R GX BCV 750 300R GX BCV 900 300R GX
(1) Interlock 600, 750 and 900 mm wide covers with 4 fixings M6 (ref.no. LFCOV G M6) per joint for additional stability (2) For covers 750 and 900 mm wide, use cover stiffeners CVSTIFF for extra rigidity
31
HDG
125
Packaging Ref.no.
Packaging
Ref.no.
Accessories
Straight couplers Supplied in pairs, with fasteners (8 per coupler) Use to couple straight lengths to straight lengths Fitting to fitting couplers Supplied in pairs, with fasteners (8 per coupler) Use to couple fitting to fitting Bendable connectors Supplied in pairs with fasteners For fabricating accessories on site to make up bends, reducers and compensate for misalignment of straight lengths Straight divider 3 m To be fixed with 10 fixings M6 (ref.no. LFDV G M6)
Accessories (continued)
Dropout plate Supplied with fasteners Use to provide local support for cables as they exit a cable ladder run between rungs
Width
PC GZ
PFC GZ
1 1 1 1 1 1
200 mm 300 mm 450 mm 600 mm 750 mm 900 mm Short reducer bracket Supplied singly with fasteners Use to form a reducer on site Straight reducer use in pairs Offset reducer use singly with straight coupler To calculate (Y) for straight reducers and offset reducers
Width Height
PH GZ
Y W K W
Y K Y
PDV GX
30
LFCC G M8
P OP TO T
1 1 1 1
PR 50 GZ PR 75 GZ PR 100 GZ PR 150 GZ
50 mm 75 mm 100 mm 150 mm
PE GZ
Flexible expansion couplers Pair supplied with fasteners 1 1 1 1 1 1 AMB 200 GZ AMB 300 GZ AMB 450 GZ AMB 600 GZ AMB 750 GZ AMB 900 GZ
PV GZ
Vertical hinged connectors Supplied in sets comprising four plates and fasteners Use with straight lengths to form risers or solve minor misalignment problems on site When used with tee bracket, vertical hinged connectors can offset tee branch Articulated riser Set comprises three ladder sections and the necessary vertical hinged connectors with fasteners Use to form risers or solve most misalignment problems on site
Width Height
200 mm 300 mm 450 mm 600 mm 750 mm 900 mm Ancillary mounting plate Supplied singly with bracket to ladder fasteners For rung mounting or side rail mounting
MP GZ
PTB GZ
1 1 1 1 1 1
PAR 200 GZ PAR 300 GZ PAR 450 GZ PAR 600 GZ PAR 750 GZ PAR 900 GZ
10
PEC
32
HDG
125
Packaging
Ref.no.
Accessories (continued)
Rail-to-rail dropout brackets Supplied in pairs with fastenings Use to attach a vertical run of ladder or tray beneath a horizontal main ladder run For ladder to ladder connection or Tray to ladder connection
Coupler sets Heavy duty (Straight couplers and fitting to fitting couplers)
Supplied in pairs, with fasteners (8 per coupler) Fastener positioning : common to both coupler set types
M GZ
Note : when connecting straight lengths to straight lengths even when ladder is cut to length, the slots in the coupler will always align with slots in the ladder side rail. When bolting to cut ends adjust coupler to ensure 8 bolts can be inserted
10
PLFEB
Fastener position
Connecting fittings with integral coupler to straight lengths
Fastenings
50 30 50 100 LF G M10 LFCC G M8 LFCOV G M6 LFDV G M6 Fixing set M10 x 20 Cover fixing set M8 Overlap fixing set M6 Divider fixing set M6 Cover stiffener for covers
Width
1 1
750 mm 900 mm
If cover does not have an overlap, or if it is cut to length, you can use a cover joint, CVF600G, CVF750G, CVF900G hot dip galv. CVF600S, CVF750S, CVF900S for stainless steel. It may be necessary to drill extra holes in the cover if it has been cut to length
350 45 250 DRILLED HOLES
33
EXTRA HEAVY DUTY H = 150 mm LADDER Width Straight length Cover straight (mm) length Flat bend 45 Cover flat bend 45 FITTINGS Flat bend 90 Cover flat bend 90 Inside riser 90
Length 6000 mm
Length 3000 mm
EFB 200 45 300 G EFB 300 45 300 G EFB 450 45 300 G EFB 600 45 300 G EFB 750 45 300 G EFB 900 45 300 G
16x Ref.nr. LF G M10
FBCV 200 45 300 GX FBCV 300 45 300 GX FBCV 450 45 300 GX FBCV 600 45 300 GX FBCV 750 45 300 GX FBCV 900 45 300 GX
5x LFCC G M8 600 - 900 mm: + 4x LFCOV G M6 750 mm: + 2x CVSTIFF 750 G 900 mm: + 2x CVSTIFF 900 G
EFB 200 90 300 G EFB 300 90 300 G EFB 450 90 300 G EFB 600 90 300 G EFB 750 90 300 G EFB 900 90 300 G
16x Ref.nr. LF G M10
FBCV 200 90 300 GX FBCV 300 90 300 GX FBCV 450 90 300 GX FBCV 600 90 300 GX FBCV 750 90 300 GX FBCV 900 90 300 GX
5x LFCC G M8 600 - 900 mm: + 4x LFCOV G M6 750 mm: + 2x CVSTIFF 750 G 900 mm: + 2x CVSTIFF 900 G
EIR 200 90 300 G EIR 300 90 300 G EIR 450 90 300 G EIR 600 90 300 G EIR 750 90 300 G EIR 900 90 300 G
16x Ref.nr. LF G M10
EXTRA HEAVY DUTY H = 150 mm ACCESSORIES Width (mm) Straight couplers Fitting to fitting couplers Bendable connectors Straight divider 3m Cover fixing set
P OP TO T
EC GZ EC GZ EC GZ EC GZ EC GZ EC GZ
SUPPLIED IN PAIRS WITH FASTENERS
EH GZ EH GZ EH GZ EH GZ EH GZ EH GZ
SUPPLIED IN PAIRS WITH FASTENERS
EE GZ EE GZ EE GZ EE GZ EE GZ EE GZ
SUPPLIED IN PAIRS WITH FASTENERS
EV GZ EV GZ EV GZ EV GZ EV GZ EV GZ
SUPPLIED IN PAIRS WITH FASTENERS
22
150
120
34
HDG
150
EXTRA HEAVY DUTY H = 150 mm FITTINGS Cover inside riser 90 Outside riser 90 Cover outside riser 90 Equal tee Cover equal tee Branch piece Cover branch piece
EIRC 200 90 300 GX EIRC 300 90 300 GX EIRC 450 90 300 GX EIRC 600 90 300 GX EIRC 750 90 300 GX EIRC 900 90 300 GX
4x LFCC G M8 600 - 900 mm: + 4x LFCOV G M6 750 mm: + 2x CVSTIFF 750 G 900 mm: + 2x CVSTIFF 900 G
EOR 200 90 300 G EOR 300 90 300 G EOR 450 90 300 G EOR 600 90 300 G EOR 750 90 300 G EOR 900 90 300 G
16x Ref.nr. LF G M10
EORC 200 90 300 GX EORC 300 90 300 GX EORC 450 90 300 GX EORC 600 90 300 GX EORC 750 90 300 GX EORC 900 90 300 GX
4x LFCC G M8 600 - 900 mm: + 4x LFCOV G M6 750 mm: + 2x CVSTIFF 750 G 900 mm: + 2x CVSTIFF 900 G
ET 200 300R G ET 300 300R G ET 450 300R G ET 600 300R G ET 750 300R G ET 900 300R G
24x Ref.nr. LF G M10
TCV 200 300R GX TCV 300 300R GX TCV 450 300R GX TCV 600 300R GX TCV 750 300R GX TCV 900 300R GX
7x LFCC G M8 600 - 900 mm: + 4x LFCOV G M6 750 mm: + 3x CVSTIFF 750 G 900 mm: + 3x CVSTIFF 900 G
EB 200 300R G EB 300 300R G EB 450 300R G EB 600 300R G EB 750 300R G EB 900 300R G
16x Ref.nr. LF G M10
BCV 200 300R GX BCV 300 300R GX BCV 450 300R GX BCV 600 300R GX BCV 750 300R GX BCV 900 300R GX
4x LFCC G M8 600 - 900 mm: + 4x LFCOV G M6 750 mm: + 1x CVSTIFF 750 G 900 mm: + 1x CVSTIFF 900 G
EXTRA HEAVY DUTY H = 150 mm ACCESSORIES Articulated riser Dropout plate Short reducer Ancillary Ancillary Tee brackets bracket mounting bracket mounting plate
Y
End cap
EAR 200 GZ EAR 300 GZ EAR 450 GZ EAR 600 GZ EAR 750 GZ EAR 900 GZ
SUPPLIED IN SET WITH FASTENERS
AMB 200 GZ AMB 300 GZ AMB 450 GZ AMB 600 GZ AMB 750 GZ AMB 900 GZ
CKET SUPPLIED WITH BRA ERS TO LADDER FASTEN
MP GZ MP GZ MP GZ MP GZ MP GZ MP GZ
CKET SUPPLIED WITH BRA ERS TO LADDER FASTEN
M GZ M GZ M GZ M GZ M GZ M GZ
SUPPLIED IN PAIRS WITH FASTENERS
WITH FASTENERS
(1) Short reducer bracket Supplied singly with fasteners Use to form a reducer on site Straight reducer use in pairs Offset reducer use singly with straight coupler To calculate (Y) for straight reducers and offset reducers
Y W K Y K
Packaging
Ref.no.
Fastenings
Fixing set M10 x 20 Cover fixing set M8 Overlap fixing set M6 Divider fixing set M6 Cover stiffener for covers
Width
50 30 50
Y W
100
1 1
750 mm 900 mm
35
HDG
150
Ladder length EL 300 G Flat bend Inside riser EIR 300 90 300 G EFB 300 90 300 G
Selection chart (page 34) Dimensions and technical information (page 52) When connecting fittings to straight lengths, use fastener sets (see below) Rung spacing : 300 mm between centres Standard radius for fittings : 300 mm
Packaging Ref.no. Packaging Ref.no.
Fittings
Flat bend 45 To be fixed with 16 fixing sets (ref.no. LF G M10)
Width
Straight length
Width Length
1 1 1 1 1 1
1 1 1 1 1 1
EFB 200 45 300 G EFB 300 45 300 G EFB 450 45 300 G EFB 600 45 300 G EFB 750 45 300 G EFB 900 45 300 G
200 mm 300 mm 450 mm 600 mm 750 mm 900 mm Cover flat bend 45 To be fixed with 5 Cover fixing sets (ref.no. LFCC G M8) 200 mm 300 mm 450 mm 600 mm(1) 750 mm(1)(2) 900 mm(1)(2) Flat bend 90 To be fixed with 16 fixing sets (ref.no. LF G M10) 200 mm 300 mm 450 mm 600 mm 750 mm 900 mm Cover flat bend 90 To be fixed with 5 Cover fixing sets (ref.no. LFCC G M8) 200 mm 300 mm 450 mm 600 mm(1) 750 mm(1)(2) 900 mm(1)(2)
1 1 1 1 1 1
1 1 1 1 1 1
FBCV 200 45 300 GX FBCV 300 45 300 GX FBCV 450 45 300 GX FBCV 600 45 300 GX FBCV 750 45 300 GX FBCV 900 45 300 GX
1 1 1 1 1 1
EFB 200 90 300 G EFB 300 90 300 G EFB 450 90 300 G EFB 600 90 300 G EFB 750 90 300 G EFB 900 90 300 G
1 1 1 1 1 1
FBCV 200 90 300 GX FBCV 300 90 300 GX FBCV 450 90 300 GX FBCV 600 90 300 GX FBCV 750 90 300 GX FBCV 900 90 300 GX
(1) Interlock 600, 750 and 900 mm wide covers with 4 fixings M6 (ref.no. LFCOV G M6) per joint for additional stability (2) For covers 750 and 900 mm wide, use cover stiffeners CVSTIFF for extra rigidity
36
HDG
150
Cover flat bend 90 FBCV 300 90 300 GX Ancilliary mounting bracket AMB 300 GZ
Short reducer bracket Cover straight length CV 300 GX Ancilliary mounting plate MP GZ ER 150 GZ
Packaging
Ref.no.
Fittings (continued)
Inside riser 90 To be fixed with 16 fixing sets (ref.no. LF G M10)
Width
Packaging
Ref.no.
Fittings (continued)
Equal tee To be fixed with 24 fixing sets (ref.no. LF G M10)
Width
1 1 1 1 1 1
EIR 200 90 300 G EIR 300 90 300 G EIR 450 90 300 G EIR 600 90 300 G EIR 750 90 300 G EIR 900 90 300 G
200 mm 300 mm 450 mm 600 mm 750 mm 900 mm Cover inside riser 90 To be fixed with 4 Cover fixing sets (ref.no. LFCC G M8) 200 mm 300 mm 450 mm 600 mm(1) 750 mm(1)(2) 900 mm(1)(2) Outside riser 90 To be fixed with 16 fixing sets (ref.no. LF G M10) 200 mm 300 mm 450 mm 600 mm 750 mm 900 mm Cover outside riser 90 To be fixed with 4 Cover fixing sets (ref.no. LFCC G M8) 200 mm 300 mm 450 mm 600 mm(1) 750 mm(1)(2) 900 mm(1)(2)
1 1 1 1 1 1
ET 200 300R G ET 300 300R G ET 450 300R G ET 600 300R G ET 750 300R G ET 900 300R G
200 mm 300 mm 450 mm 600 mm 750 mm 900 mm Cover equal tee To be fixed with 7 Cover fixing sets (ref.no. LFCC G M8) 200 mm 300 mm 450 mm 600 mm(1) 750 mm(1)(2) 900 mm(1)(2) Branch piece To be fixed with 16 fixing sets (ref.no. LF G M10) 200 mm 300 mm 450 mm 600 mm 750 mm 900 mm Cover branch piece To be fixed with 4 Cover fixing sets (ref.no. LFCC G M8) 200 mm 300 mm 450 mm 600 mm(1) 750 mm(1)(2) 900 mm(1)(2)
1 1 1 1 1 1
EIRC 200 90 300 GX EIRC 300 90 300 GX EIRC 450 90 300 GX EIRC 600 90 300 GX EIRC 750 90 300 GX EIRC 900 90 300 GX
1 1 1 1 1 1
TCV 200 300R GX TCV 300 300R GX TCV 450 300R GX TCV 600 300R GX TCV 750 300R GX TCV 900 300R GX
1 1 1 1 1 1
EOR 200 90 300 G EOR 300 90 300 G EOR 450 90 300 G EOR 600 90 300 G EOR 750 90 300 G EOR 900 90 300 G
1 1 1 1 1 1
EB 200 300R G EB 300 300R G EB 450 300R G EB 600 300R G EB 750 300R G EB 900 300R G
1 1 1 1 1 1
EORC 200 90 300 GX EORC 300 90 300 GX EORC 450 90 300 GX EORC 600 90 300 GX EORC 750 90 300 GX EORC 900 90 300 GX
1 1 1 1 1 1
BCV 200 300R GX BCV 300 300R GX BCV 450 300R GX BCV 600 300R GX BCV 750 300R GX BCV 900 300R GX
(1) Interlock 600, 750 and 900 mm wide covers with 4 fixings M6 (ref.no. LFCOV G M6) per joint for additional stability (2) For covers 750 and 900 mm wide, use cover stiffeners CVSTIFF for extra rigidity
37
HDG
150
Packaging Ref.no.
Packaging
Ref.no.
Accessories
Straight couplers Supplied in pairs, with fasteners (8 per coupler) Use to couple straight lengths to straight lengths Fitting to fitting couplers Supplied in pairs, with fasteners (8 per coupler) Use to couple fitting to fitting Bendable connectors Supplied in pairs with fasteners For fabricating accessories on site to make up bends, reducers and compensate for misalignment of straight lengths Straight divider 3 m To be fixed with 10 fixings M6 (ref.no. LFDV G M6)
Accessories (continued)
Dropout plate Supplied with fasteners Use to provide local support for cables as they exit a cable ladder run between rungs
Width
EC GZ
EFC GZ
1 1 1 1 1 1
200 mm 300 mm 450 mm 600 mm 750 mm 900 mm Short reducer bracket Supplied singly with fasteners Use to form a reducer on site Straight reducer use in pairs Offset reducer use singly with straight coupler To calculate (Y) for straight reducers and offset reducers
Width Height
EH GZ
Y W K W
Y K Y
EDV GX
30
LFCC G M8
P OP TO T
1 1 1 1
ER 50 GZ ER 75 GZ ER 100 GZ ER 150 GZ
50 mm 75 mm 100 mm 150 mm
EE GZ
Flexible expansion couplers Pair supplied with fasteners 1 1 1 1 1 1 AMB 200 GZ AMB 300 GZ AMB 450 GZ AMB 600 GZ AMB 750 GZ AMB 900 GZ
EV GZ
Vertical hinged connectors Supplied in sets comprising four plates and fasteners Use with straight lengths to form risers or solve minor misalignment problems on site When used with tee bracket, vertical hinged connectors can offset tee branch Articulated riser Set comprises three ladder sections and the necessary vertical hinged connectors with fasteners Use to form risers or solve most misalignment problems on site
Width Height
200 mm 300 mm 450 mm 600 mm 750 mm 900 mm Ancillary mounting plate Supplied singly with bracket to ladder fasteners For rung mounting or side rail mounting Tee brackets Supplied in pairs with fasteners
MP GZ
ETB GZ
1 1 1 1 1 1
EAR 200 GZ EAR 300 GZ EAR 450 GZ EAR 600 GZ EAR 750 GZ EAR 900 GZ
10
EEC
38
HDG
150
Packaging
Ref.no.
Accessories (continued)
Rail-to-rail dropout brackets Supplied in pairs with fastenings Use to attach a vertical run of ladder or tray beneath a horizontal main ladder run For ladder to ladder connection or Tray to ladder connection
Coupler sets Extra heavy duty (Straight couplers and fitting to fitting couplers)
Supplied in pairs, with fasteners (8 per coupler) Fastener positioning : common to both coupler set types
M GZ
Note : when connecting straight lengths to straight lengths even when ladder is cut to length, the slots in the coupler will always align with slots in the ladder side rail. When bolting to cut ends adjust coupler to ensure 8 bolts can be inserted
10
PLFEB
Fastener position
Connecting fittings with integral coupler to straight lengths
Fastenings
50 30 50 100 LF G M10 LFCC G M8 LFCOV G M6 LFDV G M6 Fixing set M10 x 20 Cover fixing set M8 Overlap fixing set M6 Divider fixing set M6 Cover stiffener for covers
Width
Bendable connectors
Supplied in pairs with fasteners Fabricating accessories on site from cut lengths of cable ladder, e.g. a long articulated bend
1 1
750 mm 900 mm
Reducing width of a run to the next size down when a properly manufactured reducer is not available
39
MEDIUM DUTY H = 100 mm LADDER Width (mm) Straight length Cover straight length Flat bend 45 Cover flat bend 45 FITTINGS Flat bend 90 Cover flat bend 90 Inside riser 90
Length 3000 mm
Length 3000 mm
ZFB 200 45 300 S ZFB 300 45 300 S ZFB 450 45 300 S ZFB 600 45 300 S
8x Ref.nr. LF S M10
FBCV 200 45 300 SX FBCV 300 45 300 SX FBCV 450 45 300 SX FBCV 600 45 300 SX
5x LFCC S M8 600 mm: + 4x LFCOV S M6
ZFB 200 90 300 S ZFB 300 90 300 S ZFB 450 90 300 S ZFB 600 90 300 S
8x Ref.nr. LF S M10
FBCV 200 90 300 SX FBCV 300 90 300 SX FBCV 450 90 300 SX FBCV 600 90 300 SX
5x LFCC S M8 600 mm: + 4x LFCOV S M6
ZIR 200 90 300 S ZIR 300 90 300 S ZIR 450 90 300 S ZIR 600 90 300 S
8x Ref.nr. LF S M10
MEDIUM DUTY H = 100 mm ACCESSORIES Width Straight couplers Fitting to fitting (mm) couplers Bendable connectors Straight divider 3m Cover fixing set Flexible expansion couplers Vertical hinged connectors
P OP TO T
ZC SZ ZC SZ ZC SZ ZC SZ
SUPPLIED IN PAIRS WITH FASTENERS
ZH SZ ZH SZ ZH SZ ZH SZ
SUPPLIED IN PAIRS WITH FASTENERS
ZE SZ ZE SZ ZE SZ ZE SZ
SUPPLIED IN PAIRS WITH FASTENERS
ZV SZ ZV SZ ZV SZ ZV SZ
SUPPLIED IN PAIRS WITH FASTENERS
When connecting fittings to straight lengths, use fastener sets LF S M10, see page 32
22 70 W
100
40
316 L
SS
100
MEDIUM DUTY H = 100 mm FITTINGS Cover inside riser 90 Outside riser 90 Cover outside riser 90 Equal tee Cover equal tee Branch piece Cover branch piece
ZIRC 200 90 300 SX ZIRC 300 90 300 SX ZIRC 450 90 300 SX ZIRC 600 90 300 SX
4x LFCC S M8 600 mm: + 4x LFCOV S M6
ZOR 200 90 300 S ZOR 300 90 300 S ZOR 450 90 300 S ZOR 600 90 300 S
8x Ref.nr. LF S M10
ZORC 200 90 300 SX ZORC 300 90 300 SX ZORC 450 90 300 SX ZORC 600 90 300 SX
4x LFCC S M8 600 mm: + 4x LFCOV S M6
TCV 200 300R SX TCV 300 300R SX TCV 450 300R SX TCV 600 300R SX
7x LFCC S M8 600 mm: + 4x LFCOV S M6
BCV 200 300R SX BCV 300 300R SX BCV 450 300R SX BCV 600 300R SX
4x LFCC S M8 600 mm: + 4x LFCOV S M6
MEDIUM DUTY H = 100 mm ACCESSORIES Articulated riser Dropout plate Short reducer bracket
Y
Tee brackets
End cap
MP SZ MP SZ MP SZ MP SZ
CKET SUPPLIED WITH BRA ERS TO LADDER FASTEN
M SZ M SZ M SZ M SZ
SUPPLIED IN PAIRS WITH FASTENERS
(1) Short reducer bracket Supplied singly with fasteners Use to form a reducer on site Straight reducer use in pairs Offset reducer use singly with straight coupler To calculate (Y) for straight reducers and offset reducers
Y W K Y K
Packaging
Ref.no.
Fastenings
Fixing set M10 x 20 Cover fixing set M8 Overlap fixing set M6 Divider fixing set M6
50 30 50
Y W
100
41
316 L
SS
100
Ladder length ZL 300 S Flat bend ZFB 300 90 300 S Inside riser ZIR 300 90 300 S
Selection chart (page 40) Dimensions and technical information (page 52) When connecting fittings to straight lengths, use fastener sets (see below) Rung spacing : 300 mm between centres Standard radius for fittings : 300 mm
Packaging Ref.no. Packaging Ref.no.
Fittings
Flat bend 45 To be fixed with 8 fixing sets (ref.no. LF S M10)
Width
Straight length
Width Length
1 1 1 1
1 1 1 1
ZFB 200 45 300 S ZFB 300 45 300 S ZFB 450 45 300 S ZFB 600 45 300 S
200 mm 300 mm 450 mm 600 mm Cover flat bend 45 To be fixed with 5 Cover fixing sets (ref.no. LFCC S M8) 200 mm 300 mm 450 mm 600 mm(1) Flat bend 90 To be fixed with 8 fixing sets (ref.no. LF S M10) 200 mm 300 mm 450 mm 600 mm Cover flat bend 90 To be fixed with 5 Cover fixing sets (ref.no. LFCC S M8) 200 mm 300 mm 450 mm 600 mm(1)
1 1 1 1
1 1 1 1
FBCV 200 45 300 SX FBCV 300 45 300 SX FBCV 450 45 300 SX FBCV 600 45 300 SX
1 1 1 1
ZFB 200 90 300 S ZFB 300 90 300 S ZFB 450 90 300 S ZFB 600 90 300 S
1 1 1 1
FBCV 200 90 300 SX FBCV 300 90 300 SX FBCV 450 90 300 SX FBCV 600 90 300 SX
(1) Interlock 600 mm wide covers with 4 fixings M6 (ref.no. LFCOV S M6) per joint for additional stability
42
316 L
SS
100
Flexible expansion coupler ZE SZ
Packaging
Ref.no.
Fittings (continued)
Inside riser 90 To be fixed with 8 fixing sets (ref.no. LF S M10)
Width
Packaging
Ref.no.
Fittings (continued)
Equal tee To be fixed with 12 fixing sets (ref.no. LF S M10)
Width
1 1 1 1
ZIR 200 90 300 S ZIR 300 90 300 S ZIR 450 90 300 S ZIR 600 90 300 S
200 mm 300 mm 450 mm 600 mm Cover inside riser 90 To be fixed with 4 Cover fixing sets (ref.no. LFCC S M8) 200 mm 300 mm 450 mm 600 mm(1) Outside riser 90 To be fixed with 8 fixing sets (ref.no. LF S M10) 200 mm 300 mm 450 mm 600 mm Cover outside riser 90 To be fixed with 4 Cover fixing sets (ref.no. LFCC S M8) 200 mm 300 mm 450 mm 600 mm(1)
1 1 1 1
200 mm 300 mm 450 mm 600 mm Cover equal tee To be fixed with 7 Cover fixing sets (ref.no. LFCC S M8) 200 mm 300 mm 450 mm 600 mm(1) Branch piece To be fixed with 8 fixing sets (ref.no. LF S M10) 200 mm 300 mm 450 mm 600 mm Cover branch piece To be fixed with 4 Cover fixing sets (ref.no. LFCC S M8) 200 mm 300 mm 450 mm 600 mm(1)
1 1 1 1
ZIRC 200 90 300 SX ZIRC 300 90 300 SX ZIRC 450 90 300 SX ZIRC 600 90 300 SX
1 1 1 1
TCV 200 300R SX TCV 300 300R SX TCV 450 300R SX TCV 600 300R SX
1 1 1 1
ZOR 200 90 300 S ZOR 300 90 300 S ZOR 450 90 300 S ZOR 600 90 300 S
1 1 1 1
1 1 1 1
ZORC 200 90 300 SX ZORC 300 90 300 SX ZORC 450 90 300 SX ZORC 600 90 300 SX
1 1 1 1
BCV 200 300R SX BCV 300 300R SX BCV 450 300R SX BCV 600 300R SX
(1) Interlock 600 mm wide covers with 4 fixings M6 (ref.no. LFCOV S M6) per joint for additional stability
43
316 L
SS
100
Accessories
Straight couplers Supplied in pairs, with fasteners (4 per coupler) Use to couple straight lengths to straight lengths Fitting to fitting couplers Supplied in pairs, with fasteners (4 per coupler) Use to couple fitting to fitting Bendable connectors Supplied in pairs with fasteners For fabricating accessories on site to make up bends, reducers and compensate for misalignment of straight lengths Straight divider 3 m To be fixed with 10 fixings M6 (ref.no. LFDV S M6) 1 1 1 1
P OP TO T
Packaging
Ref.no.
Packaging
Ref.no.
Accessories (continued)
Dropout plate Supplied with fasteners Use to provide local support for cables as they exit a cable ladder run between rungs
Width
ZC SZ
ZFC SZ
1 1 1 1
200 mm 300 mm 450 mm 600 mm Short reducer bracket Supplied singly with fasteners Use to form a reducer on site Straight reducer use in pairs Offset reducer use singly with straight coupler To calculate (Y) for straight reducers and offset reducers
Width Height
ZH SZ
Y W K W
Y K Y
ZDV SX
30
LFCC S M8
ZR 50 SZ ZR 75 SZ ZR 100 SZ ZR 150 SZ
50 mm 75 mm 100 mm 150 mm
ZE SZ
MP SZ
Ancillary mounting plate Supplied singly with bracket to ladder fasteners For rung mounting or side rail mounting Tee brackets Supplied in pairs with fasteners
1 1 ZV SZ Vertical hinged connectors Supplied in sets comprising four plates and fasteners Use with straight lengths to form risers or solve minor misalignment problems on site When used with tee bracket, vertical hinged connectors can offset tee branch Articulated riser Set comprises three ladder sections and the necessary vertical hinged connectors with fasteners Use to form risers or solve most misalignment problems on site
Width Height
ZTB SZ
10
ZEC
1 1 1 1
44
316 L
SS
100
Packaging
Ref.no.
Accessories (continued)
Rail-to-rail dropout brackets Supplied in pairs with fastenings Use to attach a vertical run of ladder or tray beneath a horizontal main ladder run For ladder to ladder connection or Tray to ladder connection
Coupler sets Medium duty (Straight couplers and fitting to fitting couplers)
Supplied in pairs, with fasteners (4 per coupler) Fastener positioning : common to both coupler set types
M SZ
Note : when connecting straight lengths to straight lengths even when ladder is cut to length, the slots in the coupler will always align with slots in the ladder side rail. When bolting to cut ends adjust coupler to ensure 4 bolts can be inserted
10
PLFEB
Fastener position
Connecting fittings with integral coupler to straight lengths
Fastenings
50 30 50 100 LF S M10 LFCC S M8 LFCOV S M6 LFDV S M6 Fixing set M10 x 20 Cover fixing set M8 Overlap fixing set M6 Divider fixing set M6
Lower clip for closed covers Raise clip for ventilated covers
25mm
45
HEAVY DUTY H = 125 mm LADDER Width (mm) Straight length Cover straight length Flat bend 45 FITTINGS Cover flat bend 45 Flat bend 90 Cover flat bend 90
Length 3000 mm
Length 3000 mm
PFB 200 45 300 S PFB 300 45 300 S PFB 450 45 300 S PFB 600 45 300 S PFB 750 45 300 S PFB 900 45 300 S
16x Ref.nr. LF S M10
FBCV 200 45 300 SX FBCV 300 45 300 SX FBCV 450 45 300 SX FBCV 600 45 300 SX FBCV 750 45 300 SX FBCV 900 45 300 SX
5x LFCC S M8 600 - 900 mm: + 4x LFCOV S M6 750 mm: + 2x CVSTIFF 750 S 900 mm: + 2x CVSTIFF 900 S
PFB 200 90 300 S PFB 300 90 300 S PFB 450 90 300 S PFB 600 90 300 S PFB 750 90 300 S PFB 900 90 300 S
16x Ref.nr. LF S M10
FBCV 200 90 300 SX FBCV 300 90 300 SX FBCV 450 90 300 SX FBCV 600 90 300 SX FBCV 750 90 300 SX FBCV 900 90 300 SX
5x LFCC S M8 600 - 900 mm: + 4x LFCOV S M6 750 mm: + 2x CVSTIFF 750 S 900 mm: + 2x CVSTIFF 900 S
HEAVY DUTY H = 125 mm ACCESSORIES Width Straight couplers Fitting to fitting couplers (mm) Bendable connectors Straight divider 3m Cover fixing set Flexible expansion couplers Vertical hinged connectors
P OP TO T
PC SZ PC SZ PC SZ PC SZ PC SZ PC SZ
SUPPLIED IN PAIRS WITH FASTENERS
PH SZ PH SZ PH SZ PH SZ PH SZ PH SZ
SUPPLIED IN PAIRS WITH FASTENERS
PE SZ PE SZ PE SZ PE SZ PE SZ PE SZ
SUPPLIED IN PAIRS WITH FASTENERS
PV SZ PV SZ PV SZ PV SZ PV SZ PV SZ
SUPPLIED IN PAIRS WITH FASTENERS
When connecting fittings to straight lengths, use fastener sets LF S M10, see page 35
22 95 125 W
46
316 L
SS
100 125
HEAVY DUTY H = 125 mm FITTINGS Inside riser 90 Cover inside riser 90 Outside riser 90 Cover outside riser 90 Equal tee Cover equal tee Branch piece Cover branch piece
PIR 200 90 300 S PIR 300 90 300 S PIR 450 90 300 S PIR 600 90 300 S PIR 750 90 300 S PIR 900 90 300 S
16x Ref.nr. LF S M10
PIRC 200 90 300 SX PIRC 300 90 300 SX PIRC 450 90 300 SX PIRC 600 90 300 SX PIRC 750 90 300 SX PIRC 900 90 300 SX
4x LFCC S M8 600 - 900 mm: + 4x LFCOV S M6 750 mm: + 2x CVSTIFF 750 S 900 mm: + 2x CVSTIFF 900 S
POR 200 90 300 S POR 300 90 300 S POR 450 90 300 S POR 600 90 300 S POR 750 90 300 S POR 900 90 300 S
16x Ref.nr. LF S M10
PORC 200 90 300 SX PORC 300 90 300 SX PORC 450 90 300 SX PORC 600 90 300 SX PORC 750 90 300 SX PORC 900 90 300 SX
4x LFCC S M8 600 - 900 mm: + 4x LFCOV S M6 750 mm: + 2x CVSTIFF 750 S 900 mm: + 2x CVSTIFF 900 S
PT 200 300R S PT 300 300R S PT 450 300R S PT 600 300R S PT 750 300R S PT 900 300R S
24x Ref.nr. LF S M10
TCV 200 300R SX TCV 300 300R SX TCV 450 300R SX TCV 600 300R SX TCV 750 300R SX TCV 900 300R SX
7x LFCC S M8 600 - 900 mm: + 4x LFCOV S M6 750 mm: + 3x CVSTIFF 750 S 900 mm: + 3x CVSTIFF 900 S
PB 200 300R S PB 300 300R S PB 450 300R S PB 600 300R S PB 750 300R S PB 900 300R S
16x Ref.nr. LF S M10
BCV 200 300R SX BCV 300 300R SX BCV 450 300R SX BCV 600 300R SX BCV 750 300R SX BCV 900 300R SX
4x LFCC S M8 600 - 900 mm: + 4x LFCOV S M6 750 mm: + 1x CVSTIFF 750 S 900 mm: + 1x CVSTIFF 900 S
HEAVY DUTY H = 125 mm ACCESSORIES Articulated riser Dropout plate Short reducer bracket
Y
Tee brackets
End cap
PAR 200 SZ PAR 300 SZ PAR 450 SZ PAR 600 SZ PAR 750 SZ PAR 900 SZ
SUPPLIED IN SET WITH FASTENERS
PR 50 SZ PR 75 SZ PR 100 SZ PR 150 SZ
MP SZ MP SZ MP SZ MP SZ MP SZ MP SZ
CKET SUPPLIED WITH BRA ERS TO LADDER FASTEN
M SZ M SZ M SZ M SZ M SZ M SZ
SUPPLIED IN PAIRS WITH FASTENERS
WITH FASTENERS
(1) Short reducer bracket Supplied singly with fasteners Use to form a reducer on site Straight reducer use in pairs Offset reducer use singly with straight coupler To calculate (Y) for straight reducers and offset reducers
Y W K Y K
Packaging
Ref.no.
Fastenings
Fixing set M10 x 20 Cover fixing set M8 Overlap fixing set M6 Divider fixing set M6 Cover stiffener for covers
Width
50 30 50
Y W
100
1 1
750 mm 900 mm
47
316 304L
SS
100 125
Flat bend Inside riser PIR 300 90 300 S PFB 300 90 300 S
Selection chart (page 46) Dimensions and technical information (page 52)
When connecting fittings to straight lengths, use fastener sets (see below) Rung spacing : 300 mm between centres Standard radius for fittings : 300 mm
Packaging Ref.no.
Packaging
Ref.no.
Fittings
Flat bend 45 To be fixed with 16 fixing sets (ref.no. LF S M10)
Width
Straight length
Width Length
1 1 1 1 1 1
1 1 1 1 1 1
PFB 200 45 300 S PFB 300 45 300 S PFB 450 45 300 S PFB 600 45 300 S PFB 750 45 300 S PFB 900 45 300 S
200 mm 300 mm 450 mm 600 mm 750 mm 900 mm Cover flat bend 45 To be fixed with 5 Cover fixing sets (ref.no. LFCC S M8) 200 mm 300 mm 450 mm 600 mm(1) 750 mm(1)(2) 900 mm(1)(2) Flat bend 90 To be fixed with 16 fixing sets (ref.no. LF S M10) 200 mm 300 mm 450 mm 600 mm 750 mm 900 mm Cover flat bend 90 To be fixed with 5 Cover fixing sets (ref.no. LFCC S M8) 200 mm 300 mm 450 mm 600 mm(1) 750 mm(1)(2) 900 mm(1)(2)
1 1 1 1 1 1
1 1 1 1 1 1
FBCV 200 45 300 SX FBCV 300 45 300 SX FBCV 450 45 300 SX FBCV 600 45 300 SX FBCV 750 45 300 SX FBCV 900 45 300 SX
1 1 1 1 1 1
PFB 200 90 300 S PFB 300 90 300 S PFB 450 90 300 S PFB 600 90 300 S PFB 750 90 300 S PFB 900 90 300 S
1 1 1 1 1 1
FBCV 200 90 300 SX FBCV 300 90 300 SX FBCV 450 90 300 SX FBCV 600 90 300 SX FBCV 750 90 300 SX FBCV 900 90 300 SX
(1) Interlock 600, 750 and 900 mm wide covers with 4 fixings M6 (ref.no. LFCOV S M6) per joint for additional stability (2) For covers 750 and 900 mm wide, use cover stiffeners CVSTIFF for extra rigidity
48
316 L
SS
100 125
Packaging
Ref.no.
Fittings (continued)
Inside riser 90 To be fixed with 16 fixing sets (ref.no. LF S M10)
Width
Packaging
Ref.no.
Fittings (continued)
Equal tee To be fixed with 24 fixing sets (ref.no. LF S M10)
Width
1 1 1 1 1 1
PIR 200 90 300 S PIR 300 90 300 S PIR 450 90 300 S PIR 600 90 300 S PIR 750 90 300 S PIR 900 90 300 S
200 mm 300 mm 450 mm 600 mm 750 mm 900 mm Cover inside riser 90 To be fixed with 4 Cover fixing sets (ref.no. LFCC S M8) 200 mm 300 mm 450 mm 600 mm(1) 750 mm(1)(2) 900 mm(1)(2) Outside riser 90 To be fixed with 16 fixing sets (ref.no. LF S M10) 200 mm 300 mm 450 mm 600 mm 750 mm 900 mm Cover outside riser 90 To be fixed with 4 Cover fixing sets (ref.no. LFCC S M8) 200 mm 300 mm 450 mm 600 mm(1) 750 mm(1)(2) 900 mm(1)(2)
1 1 1 1 1 1
PT 200 300R S PT 300 300R S PT 450 300R S PT 600 300R S PT 750 300R S PT 900 300R S
200 mm 300 mm 450 mm 600 mm 750 mm 900 mm Cover equal tee To be fixed with 7 Cover fixing sets (ref.no. LFCC S M8) 200 mm 300 mm 450 mm 600 mm(1) 750 mm(1)(2) 900 mm(1)(2) Branch piece To be fixed with 16 fixing sets (ref.no. LF S M10) 200 mm 300 mm 450 mm 600 mm 750 mm 900 mm Cover branch piece To be fixed with 4 Cover fixing sets (ref.no. LFCC S M8) 200 mm 300 mm 450 mm 600 mm(1) 750 mm(1)(2) 900 mm(1)(2)
1 1 1 1 1 1
PIRC 200 90 300 SX PIRC 300 90 300 SX PIRC 450 90 300 SX PIRC 600 90 300 SX PIRC 750 90 300 SX PIRC 900 90 300 SX
1 1 1 1 1 1
TCV 200 300R SX TCV 300 300R SX TCV 450 300R SX TCV 600 300R SX TCV 750 300R SX TCV 900 300R SX
1 1 1 1 1 1
POR 200 90 300 S POR 300 90 300 S POR 450 90 300 S POR 600 90 300 S POR 750 90 300 S POR 900 90 300 S
1 1 1 1 1 1
PB 200 300R S PB 300 300R S PB 450 300R S PB 600 300R S PB 750 300R S PB 900 300R S
1 1 1 1 1 1
PORC 200 90 300 SX PORC 300 90 300 SX PORC 450 90 300 SX PORC 600 90 300 SX PORC 750 90 300 SX PORC 900 90 300 SX
1 1 1 1 1 1
BCV 200 300R SX BCV 300 300R SX BCV 450 300R SX BCV 600 300R SX BCV 750 300R SX BCV 900 300R SX
(1) Interlock 600, 750 and 900 mm wide covers with 4 fixings M6 (ref.no. LFCOV S M6) per joint for additional stability (2) For covers 750 and 900 mm wide, use cover stiffeners CVSTIFF for extra rigidity
49
316 L
SS
100 125
Packaging Ref.no.
Packaging
Ref.no.
Accessories
Straight couplers Supplied in pairs, with fasteners (8 per coupler) Use to couple straight lengths to straight lengths Fitting to fitting couplers Supplied in pairs, with fasteners (8 per coupler) Use to couple fitting to fitting Bendable connectors Supplied in pairs with fasteners For fabricating accessories on site to make up bends, reducers and compensate for misalignment of straight lengths Straight divider 3 m To be fixed with 10 fixings M6 (ref.no. LFDV S M6)
Accessories (continued)
Dropout plate Supplied with fasteners Use to provide local support for cables as they exit a cable ladder run between rungs
Width
PC SZ
PFC SZ
1 1 1 1 1 1
200 mm 300 mm 450 mm 600 mm 750 mm 900 mm Short reducer bracket Supplied singly with fasteners Use to form a reducer on site Straight reducer use in pairs Offset reducer use singly with straight coupler To calculate (Y) for straight reducers and offset reducers
Width Height
PH SZ
Y W K W
Y K Y
PDV SX
30
LFCC S M8
P OP TO T
1 1 1 1
PR 50 SZ PR 75 SZ PR 100 SZ PR 150 SZ
50 mm 75 mm 100 mm 150 mm
PE SZ
Ancillary mounting plate Supplied singly with bracket to ladder fasteners For rung mounting or side rail mounting Tee brackets Supplied in pairs with fasteners
PV SZ
Vertical hinged connectors Supplied in sets comprising four plates and fasteners Use with straight lengths to form risers or solve minor misalignment problems on site When used with tee bracket, vertical hinged connectors can offset tee branch Articulated riser Set comprises three ladder sections and the necessary vertical hinged connectors with fasteners Use to form risers or solve most misalignment problems on site
Width Height
PTB SZ
10
PEC
1 1 1 1 1 1
PAR 200 SZ PAR 300 SZ PAR 450 SZ PAR 600 SZ PAR 750 SZ PAR 900 SZ
50
316 L
SS
100 125
Packaging
Ref.no.
Accessories (continued)
Rail-to-rail dropout brackets Supplied in pairs with fastenings Use to attach a vertical run of ladder or tray beneath a horizontal main ladder run For ladder to ladder connection or Tray to ladder connection
Coupler sets Heavy duty (Straight couplers and fitting to fitting couplers)
Supplied in pairs, with fasteners (8 per coupler) Fastener positioning : common to both coupler set types
M SZ
Note : when connecting straight lengths to straight lengths even when ladder is cut to length, the slots in the coupler will always align with slots in the ladder side rail. When bolting to cut ends adjust coupler to ensure 8 bolts can be inserted
10
PLFEB
Fastener position
Connecting fittings with integral coupler to straight lengths
Fastenings
50 30 50 100 LF S M10 LFCC S M8 LFCOV S M6 LFDV S M6 Fixing set M10 x 20 Cover fixing set M8 Overlap fixing set M6 Divider fixing set M6 Cover stiffener for covers
Width
1 1
750 mm 900 mm
8 8 12 8
16 16 24 16
Connect together to form pre-set angles or pre-assemble for adjustment on site using the holes / slots given below
A B C H O G F E D D
E F G O C B A H
Type
15
18
225
30
45
ZV / PV / EV G:C
A:F
E:B
B:G
F:C
51
35 x 11
50
200 18 43 62 71
300 19 46 66 74
750 88 96
900 94 103
35 x 11
50
Number of fasteners required per fitting type Medium duty Heavy and Extra heavy duty
8 8 12 8
16 16 24 16
Light duty coupling OR ACCESSORY (cut lengths only) Cut the side rail at the joggle joint 100 mm longer than the required length. Locate the joggle end of a straight lenght or accessory in the side rail of the cut lenght and butt join the opposite side rails. Secure the joggle joint. Fit a coupler to the outside of the butt joined side rails across the joint. Adjust the coupler position to align the slots with the side rail slots and secure it with the fastenings.
Fastener sets LF G M10 and LF S M10 comprising: M10 coach bolt, flat washer, spring washer and nut
100
BUTT JOINT
Fastener position
Connecting fittings with integral coupler to straight lengths Medium duty H = 100 mm Heavy duty H = 125 mm and Extra heavy duty H = 150 mm
Note: because of integrated coupler the effective length of a light duty cable ladder is 2900 mm
Medium duty H = 100 mm Supplied in pairs, with fasteners (4 per coupler) Fastener positioning : common to both coupler set types
Flat bends
X = length of fitting from each 'end' of centre-line (not including integral coupler) Y = length from each 'end' of the fitting to the point at which the centre-lines intersect (not including integral coupler) C = length of the centre-line from each 'end' of the fitting to the point at which the centre-lines intersect (not including integral coupler)
90
X 80
X
Note : when connecting straight lengths to straight lengths even when ladder is cut to length, the slots in the coupler will always align with slots in the ladder side rail. When bolting to cut ends adjust coupler to ensure 4 bolts can be inserted
45
Heavy duty H = 125 mm and Extra heavy duty H = 150 mm Supplied in pairs, with fasteners (8 per coupler) Fastener positioning : common to both coupler set types
W
Y
W
80 Y
90 Y
45 Y
Note : when connecting straight lengths to straight lengths even when ladder is cut to length, the slots in the coupler will always align with slots in the ladder side rail. When bolting to cut ends adjust coupler to ensure 8 bolts can be inserted
52
Risers
X = length of fitting from each 'end' of centre-line Y = length from each 'end' of the fitting to the point at which the centrelines intersect C = length of the centre-line from each 'end' of the fitting to the point at which the centre-lines intersect Dimensions shown are identical for both inside and outside risers
C X
90
(1)
Width (W)
Radius (R)
90 Y
All
300
350
350
350
90
(1)
If cover does not have an overlap, or if it is cut to length, you can use a cover joint, CVF600G, CVF750G, CVF900G hot dip galv. CVF600S, CVF750S, CVF900S for stainless steel. It may be necessary to drill extra holes in the cover if it has been cut to length
Y
350 45 DRILLED HOLES
X
FOUR 12 x 7 OBROUND SLOTS
250
Width (W)
Radius (R)
90 Y
All
300
363
363
363
90
(1)
Width (W)
Radius (R)
90 Y
All
300
375
375
375
Straight dividers
Fasteners to be ordered separately (LFDV) Lower clip for closed covers Raise clip for ventilated covers
25mm
Closed cover
Ventilated cover
53
Bendable connectors
Supplied in pairs with fasteners Fabricating accessories on site from cut lengths of cable ladder, e.g. a long articulated bend
Correcting minor mis-alignment problems Connect together to form pre-set angles or pre-assemble for adjustment on site using the holes / slots given below Reducing width of a run to the next size down when a properly manufactured reducer is not available
A B C H O G F E D D
E F G O C B A H
Type
15
18
225
30
45
ZV / PV / EV G:C
A:F
E:B
B:G
F:C
Y W
Use the following calculations to establish ladder width reduction This measurement (Y), can then be inserted into relevant ref.no.s to show bracket size required
Offset reducer Y= W-K Straight reducer Y=W-K 2
Short reducer brackets can also be used to convert an equal tee into an unequal tee
54
Articulated risers
Set comprises three ladder sections and the necessary vertical hinged connectors with fasteners Use to form risers or solve most misalignment problems on site Sections required for a given angle R = radius
Tee brackets
Supplied in pairs with fasteners Use to create a straight or 90 branch off a straight ladder run
R370
R500
R630
R760
90
B:G R370 B:G G:C
Couple with vertical hinged connectors or bendable connectors to offset the branch
E:B
A:F R760
G:C
60
45
R760
30
R760
using bendable connectors using vertical hinged connectors
G:C
Connect together to form pre-set angles or pre-assembled for adjustment on site using the holes / slots shown Main ladder run
A B C H O G F E D D C E F G O B A H Permitted ladder branch Medium Heavy Extra duty duty heavy duty
Medium duty H = 100 mm Heavy duty H = 125 mm Extra heavy duty H = 150 mm
PTB PTB
ETB
Type
15
18
225
30
45
Dropout plate
Supplied with fasteners Use to provide local support for cables as they exit a cable ladder run between rungs
18
13 12
30
55
Branch piece
Siderail cut away X
Width W
200 wide
600 wide
300 wide
750 wide
450 wide
900 wide
56
CABLOFIL
>>>
CABLOFIL STEEL WIRE CABLE TRAY World standard in steel wire tray. Cablofil is the most tested and certified steel wire cable tray system. Cablofil meets the highest demands and offers the best mechanical characteristics and fastest installation. The patented Safe-T-EdgeTM technology protects both cable and installer.
57
SUPPORTING SYSTEMS
]
Supporting systems
SUPPORTING SYSTEMS
The supporting systems range can be divided into the following applications: > Ceiling supports > Brackets (wall, clamping or supporting brackets) > Threaded rod suspensions
58
Legrand has tested the supports and brackets in compliance with DIN VDE-E 0639 part 1 and in accordance with the newest standard IEC 61537. When fixing the supporting constructions, always take the load that is applied to the constructional part into consideration.
Programme
The supporting systems programme can be divided into the following parts: ceiling supports brackets (wall, clamping or supporting brackets) threaded rod suspensions For optimum ease of searching, the supporting systems have been classified in the catalogue as follows: 1 Ceiling system U55 (Medium duty) U60 (Heavy duty) I-80 (Extra heavy duty)
Trapeze hangers
59
SUPPORTING SYSTEMS
]
Supporting systems
Loading graphs
[
Example: for the ladder H100 W600 (ladder weight 55 N/m, with safe working load of 1050 N/m and span of 4,5 m: (1050 N/m + 55 N/m) x 4,5m = 4972,5 Newton. A bracket of support systems will therefore need to be able to support this load.
Symmetrical load
3500 N
6000 N
10.000 N
c a
c a
c a
120 43 11 x
135 80 14 x
135 50 14 x
Finishing
60
(7 x 30 x 25) + 45 = 570 N/m x 4 m = 2280 N To find the suitable ceiling support, draw a line straight down from the 2280 N mark on the top axis straight down. Also draw a line from the left axis (ladder width 300 mm) straight to the right. The intersection of these two lines is in the area of the suitable support, in this case in the blue area of the U60 support.
1000 N
2000 N
3000 N
4000 N
5000 N
6000 N
klasse 3,5 kN
200
sse N kla )6k
imaal) (max
300
(2 M12
apt
er M
k x) 6 2 (2
se las Nk
600
General notes: - It is not allowed to: - Walk across a cable ladder installation - Let ladders, scaffolding or other objects lean on a cable ladder installation - The loads shown in all graphs are the safe recommended maximum loads that can be applied and must include wind, snow and any other external forces in addition to the cable load. - Fittings do not need separate supporting (unless W>600mm) - When designing and fixing support constructions, the load on the total structure (building) must be taken into account.
61
HDG
Support U55
Profile U55
Packaging
Ref.no.
Support U55
Support U55 medium duty Moment 1% deflection 320 Nm Symmetrical load 3500 N Including protection cap ref.no. 87064 01
Length
Packaging
Ref.no.
1 1 1 1 1 1 1 1 1 1 1
87664 02 87664 03 87664 04 87664 05 87664 06 87664 07 87664 08 87664 09 87664 10 87664 11 87664 12
200 mm 300 mm 400 mm 500 mm 600 mm 700 mm 800 mm 900 mm 1000 mm 1100 mm 1200 mm
1 1 1 1 1 1
Fixing materials
100 Carriage bolt 80699 41 M8 x 35 mm Hexagon bolt 80699 03 M8 x 20 mm Hexagon nut 80699 07 M8 Washer 80699 43 8,4 x 25 x 2 mm
100
100 100
10
End cap U50/U55 87064 01 Plastic, yellow Protection for support end
62
HDG
Support U60
Profile U60
Packaging
Ref.no.
Support U60
Support U60 heavy duty Moment 1% deflection 780 Nm Symmetrical load 6000 N Including protection cap ref.no. 87064 02
Length
Packaging
Ref.no.
6 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
87665 02 87665 03 87665 04 87665 05 87665 06 87665 07 87665 08 87665 09 87665 10 87665 11 87665 12 87665 13 87665 14 87665 15 87665 16 87665 18 87665 20
200 mm 300 mm 400 mm 500 mm 600 mm 700 mm 800 mm 900 mm 1000 mm 1100 mm 1200 mm 1300 mm 1400 mm 1500 mm 1600 mm 1800 mm 2000 mm
1 1 1 1 1 1
1 1
Profile U60 heavy duty Moment 1200 Nm 87665 30 3000 mm 87665 45 4500 mm
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
80606 25 80606 30 80606 35 80606 40 80606 45 80606 50 80606 55 80606 60 80606 65 80606 70 80606 75 80606 85 80606 90 80606 91 80606 96
250 mm 300 mm 350 mm 400 mm 450 mm 500 mm 550 mm 600 mm 650 mm 700 mm 750 mm 850 mm 900 mm 950 mm 1050 mm
120 mm 120 mm 120 mm 120 mm 162 mm 162 mm 162 mm 162 mm 162 mm 162 mm 210 mm 210 mm 210 mm 210 mm 210 mm
6000 N 6150 N 6300 N 6500 N 6700 N 6900 N 7100 N 7300 N 7500 N 7700 N 7900 N 8100 N 8300 N 8500 N 8800 N
Fixing materials
10 Ceiling bracket U60 6000 N 87665 50 Lock to profile with 2x M10 x 25 mm carriage bolt + washer + hexagon nut Adjustable between -30 and +30 End plate profile U60 6000 N 87665 60 Lock to profile with 2x M10 x 25 mm carriage bolt + washer + hexagon nut Profile connector U60 profile 87665 70 Lock to profile with 4x M10 x 20 mm hexagon bolt + washer + hexagon nut End cap U60 87064 02 Plastic, yellow Protection for support end 100 Carriage bolt 80699 35 M10 x 25 mm Hexagon bolt 80699 20 M10 x 20 mm Hexagon nut 80699 06 M10 Washer 80699 09 10,5 x 21 x 2 mm
10
100
100 100
10
63
HDG
Support I-80
87668 03
87068 00
87668 82
Packaging
Ref.no.
Support I-80
Support I-80 extra heavy duty Moment 1% deflection 1440 Nm Symmetrical load 10000 N Heavy duty support for single- and double-sided suspension of clamping brackets
Length
Packaging
Ref.no.
10
Head plate I-80 87668 81 For horizontal ceilings Including fixing material Head plate transverse I-80 87668 86 For horizontal ceilings Including fixing material
1 1 1 1 1 1 1 1 1 1 1 1 1 1
87668 02 87668 03 87668 04 87668 05 87668 06 87668 07 87668 08 87668 09 87668 10 87668 12 87668 14 87668 16 87668 18 87668 20
200 mm 300 mm 400 mm 500 mm 600 mm 700 mm 800 mm 900 mm 1000 mm 1100 mm 1400 mm 1600 mm 1800 mm 2000 mm Profile I-80 extra heavy duty Moment 2250 Nm Symmetrical load 10000 N To be applied to heavy duty supporting constructions combined with I-80 items Other lengths possible upon request 200 mm 300 mm 400 mm 500 mm 600 mm 700 mm 800 mm 900 mm 1000 mm 3000 mm 6000 mm
10
Adjustable head plate I-80 87668 82 For non-horizontal ceilings Including fixing material Adjustable head plate transverse I-80 87668 87 For non-horizontal ceilings Including fixing material
20
Connector transverse I-80 87668 85 Including fixing material Profile connector I-80 87668 84 Including fixing material
20
1 1 1 1 1 1 1 1 1 1 1
87667 02 87667 03 87667 04 87667 05 87667 06 87667 07 87667 08 87667 09 87667 10 87667 30 87667 60
Wall/floor/ceiling angle I-80 87668 83 Including fixing material Adapter I-80 87634 70 For increasing the distance between anchor bolts, for heavier loads End cap I-80 87068 00 Plastic, yellow Protection for support end
25
64
HDG
P1 b1
80607 30
P2 P3 b3 P4
b2
1 2 3 4 5 6 7
Support I-80 Profile I-80 Head plate I-80 Adjustable head plate I-80 Wall/floor/ceiling angle I-80 Profile connector I-80 Connector transverse I-80
Packaging
Ref.no.
b4
1 1 1 1 1 1 1
1 5
I-80 clamp 5572 03 To fix bracket heavy duty to I-80 support Bracket width 200 - 500: 1 piece Bracket width 600 - 700: 2 pieces Clamping bracket for I-80 support Including fixing materials 250 mm 120 mm 6000 N 300 mm 120 mm 6150 N 350 mm 120 mm 6300 N 400 mm 120 mm 6500 N 450 mm 162 mm 6700 N 500 mm 162 mm 6900 N 550 mm 162 mm 7100 N 600 mm 162 mm 7300 N 650 mm 162 mm 7500 N 700 mm 162 mm 7700 N 750 mm 210 mm 7900 N 850 mm 210 mm 8100 N 900 mm 210 mm 8300 N 950 mm 210 mm 8500 N 1050 mm 210 mm 8800 N
1
2 5 7
2 5 7 2
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
80607 25 80607 30 80607 35 80607 40 80607 45 80607 50 80607 55 80607 60 80607 65 80607 70 80607 75 80607 85 80607 90 80607 91 80607 96
5 1 1
2 1 7 2 7
Beamclamp 80600 32 To fix a support directly onto a structural beam 6000 N per clamp, lock with 2x M10 x 80 mm hexagon screw + nut + washer (ref.no. 80699 00 + 80699 06 + 80699 09)
65
HDG
HDG
Trapeze hanger
Packaging
Ref.no.
Trapeze hanger
Light duty trapeze hangers Supplied singly without fastenings Support horizontal light duty ladder from overhead structures Use M10 threaded rods
Length Max. load
Packaging
Ref.no.
1 1 1
225 mm 2000 N 300 mm 2700 N 450 mm 3000 N Heavy duty trapeze hangers Supplied singly without fasteners Support horizontal runs of ladder from overhead structure Use M10 threaded rods
Length Max. load
1 1
ORB GZ ZRB GZ
1 1 1 1
200 mm 4000 N 300 mm 4000 N 450 mm 4000 N 600 mm 5000 N Load data apply only when fixed according to instructions on page 73! Ceiling bracket universal M10 2500 N M10
82621 00
25
82640 00
M10
1000 mm
82621 00
25
82640 00
M10
1000 mm
FL2
66
HDG
HDG
Packaging
Ref.no.
Accessories
Hold down clip Supplied singly without fasteners Fits ladder to flat surfaces, Swiftrack channel or heavy duty trapeze hangers which have slots in the top flange to accept fasteners Light duty H 50 mm Medium duty H 100 mm Heavy duty H 125 mm Extra heavy duty H 150 mm Hold down bracket Supplied singly without fasteners Fits ladder to flat surfaces, Swiftrack channel, cantilever arms or heavy duty trapeze hangers which have slots in the top flange to accept fasteners Light duty H 50 mm Medium duty H 100 mm Heavy duty H 125 mm Extra heavy duty H 150 mm Boltable hold down bracket Supplied singly with bracket to ladder fastener Fits ladder to Swiftrack channel in fabricated steel support structure Medium duty H 100 mm Heavy duty H 125 mm Extra heavy duty H 150 mm Boltable angled hold down brackets Supplied in handed pairs with bracket to ladder fastener Fits ladder to heavy duty cantilever arms and trapeze hangers which have slots in the side flange to accept fasteners Medium duty H 100 mm Heavy duty H 125 mm Extra heavy duty H 150 mm End connectors Pair supplied with fasteners Light duty H 50 mm Medium duty H 100 mm Heavy duty H 125 mm Extra heavy duty H 150 mm Beam fixing clamp For fixing a ladder on a structural beam
80606 30
ZWSB GZ
10 10 10 10
OF G ZF G PF G EF G
Packaging
Ref.no.
Wall Brackets
Bracket heavy duty 3000 N
Width
1 1 1 1 1 1
200 mm 300 mm 400 mm 500 mm 600 mm 700 mm Bracket extra heavy duty 6000 N
Width Height Max. load
10 10 10 10
OJ G ZJ G PJ G EJ G
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
80606 25 80606 30 80606 35 80606 40 80606 45 80606 50 80606 55 80606 60 80606 65 80606 70 80606 75 80606 85 80606 90 80606 91 80606 96
250 mm 300 mm 350 mm 400 mm 450 mm 500 mm 550 mm 600 mm 650 mm 700 mm 750 mm 850 mm 900 mm 950 mm 1050 mm
120 mm 120 mm 120 mm 120 mm 162 mm 162 mm 162 mm 162 mm 162 mm 162 mm 210 mm 210 mm 210 mm 210 mm 210 mm
6000 N 6150 N 6300 N 6500 N 6700 N 6900 N 7100 N 7300 N 7500 N 7700 N 7900 N 8100 N 8300 N 8500 N 8800 N
1 1 1
ZN GZ PN GZ EN GZ
1 1 1
ZP GZ PP GZ EP GZ
1 1 1 1
Wall support bracket Supplied in pairs with fasteners For vertical ladder installation Light duty H 50 mm Medium duty H 100 mm Heavy duty H 125 mm Extra heavy duty H 150 mm
1 1 1 1
OB GZ ZB GZ PB GZ EB GZ
80600 35
67
316 L
SS
316 L
SS
Trapeze hanger
Packaging
Ref.no.
Trapeze hanger
Heavy duty trapeze hangers Supplied singly without fasteners Support horizontal runs of ladder from overhead structure Use M10 threaded rods
Length Max. load
Packaging
Ref.no.
1 1 1 1
200 mm 4000 N 300 mm 4000 N 450 mm 4000 N 600 mm 5000 N Load data apply only when fixed according to instructions on page 73! Ceiling bracket universal M10 2000 N M10
ZRB SZ
4185-0101
4185-0101
25
4192-0100
M10
1000 mm
25
4192-0100
M10
1000 mm
68
316 L
SS
316 L
SS
Packaging
Ref.no.
Accessories
Hold down clip Supplied singly without fasteners Fits ladder to flat surfaces, Swiftrack channel or heavy duty trapeze hangers which have slots in the top flange to accept fasteners H = 100 Standard Including insulating pad + bush H = 125 Standard Including insulating pad + bush Hold down bracket Supplied singly without fasteners Fits ladder to flat surfaces, Swiftrack channel, cantilever arms or heavy duty trapeze hangers which have slots in the top flange to accept fasteners H = 100 Standard Including insulating pad + bush H = 125 Standard Including insulating pad + bush Boltable hold down bracket Supplied singly with bracket to ladder fastener Fits ladder to Swiftrack channel in fabricated steel support structure Medium duty H 100 mm Heavy duty H 125 mm
80406 30
ZWSB SZ
1 1 1 1
ZF S ZFIN SZ PF S PFIN SZ
Packaging
Ref.no.
Brackets
Wall bracket
Width Height Max. load
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
80406 25 80406 30 80406 35 80406 40 80406 45 80406 50 80406 55 80406 60 80406 65 80406 70 80406 75 80406 85 80406 90 80406 91 80406 96
250 mm 300 mm 350 mm 400 mm 450 mm 500 mm 550 mm 600 mm 650 mm 700 mm 750 mm 850 mm 900 mm 950 mm 1050 mm
120 mm 120 mm 120 mm 120 mm 162 mm 162 mm 162 mm 162 mm 162 mm 162 mm 210 mm 210 mm 210 mm 210 mm 210 mm
6000 N 6150 N 6300 N 6500 N 6700 N 6900 N 7100 N 7300 N 7500 N 7700 N 7900 N 8100 N 8300 N 8500 N 8800 N
1 1 1 1
ZJ S ZJIN SZ PJ S PJIN SZ
1 1
ZN SZ PN SZ
1 1
ZWSB SZ PWSB SZ
Wall support bracket Supplied in pairs with fasteners For risingladder Medium duty H 100 mm Heavy duty H 125 mm 1 1 ZP SZ PP SZ
Boltable angled hold down brackets Supplied in handed pairs with bracket to ladder fastener Fits ladder to heavy duty cantilever arms and trapeze hangers which have slots in the side flange to accept fasteners Medium duty H 100 mm Heavy duty H 125 mm
1 1
ZB SZ PB SZ
End connectors Pair supplied with fasteners Medium duty H 100 mm Heavy duty H 125 mm Beam fixing clamp For fixing a ladder on a structural beam
80400 35
69
Dimensions
Support U55 medium heavy duty
20x11 43 8,5x35 120 50 160
25 x 13
25 x 13
50 36
8,5x35 12
50
200
100 14 x 40
100
50 135 200
70x24
11 x 18
120
40 x 11
135 200
50
50
40 x 11
14
100
70
80
145 200
116
50
100 - 300 mm
400 - 600 mm
700 mm
max. 3
max.
30
135 200
Threaded rod
M10
L 255
60
10,5 50 40
18
100 174
Adapter I-80
14 90 M10
200
145 30 20 320
71
Hold down clip Fits ladder to flat surfaces, Swiftrack channel or heavy duty trapeze hangers which have slots in the top flange to accept fasteners Supplied singly without fasteners. Insulated hold down clips are available for stainless steel ladder. The table below gives the fixing hole spacing required when attaching hold down clips to other supports.
Bracket length for ladderwith: Light duty ladder H50 on 3000N brackets:
Ladder width Hold down Hold down Hold down clip bracket (inside) bracket (outside)
Type
OF ZF PF EF
W = ladder width
W + 35 W + 95 W + 95 W + 95
200 mm 300 mm
Hold down bracket Fits ladder to flat surfaces, Swiftrack channel, cantilever arms or heavy duty trapeze hangers which have slots in the top flange to accept fasteners Supplied singly without fasteners Insulated hold down brackets are available for stainless steel ladder, contact us on 0845 605 4333 The table below gives the fixing hole spacing required when attaching hold down bracket to other supports
X
Type Centre distance between fixing holes inside ladder Y outside ladder X Fixing
OJ ZJ PJ EJ
W 38 W 44 W 44 W 44
W + 62 W + 80 W + 80 W + 80
W = ladder width
Wall support brackets Supplied in pairs with bracket to ladder fasteners Fit horizontal or vertical runs of ladder to vertical surfaces and Swiftrack channel Max. load: 3000 N/pair
11 HOLES
2 to 3m W W+
72
Boltable hold down bracket Supplied singly with bracket to ladder fastener Fit ladder to Swiftrack channel in fabricated steel support structure Bracket to support fastener: M12
90 end connectors Supplied in pairs with bracket to ladder fasteners Fit ends of ladder to vertical surfaces
OB 12 X 7 SLOTS W+170 W+137 W+103 W+70 W A
A
Boltable angled hold down brackets Supplied in handed pairs with bracket to ladder fastener Fit ladder to trapeze hangers which have slots in the side flange to accept fasteners
OB ZB PB EB
20 50 75 75
ZB PB EB 11 HOLES A
W+54 W
Hanger rod brackets BRACKET TO LADDER Brackets are fixed directly to the outside of the ladder siderail as shown. The slots in the side rail and the bracket provide sufficient movement to align the bracket with the threaded rod. BRACKET TO THREADED ROD Four nuts and washers are used to fix each bracket to the threaded rod. This ensures the stability of the support and also optimises the safe working load.
A
Trapeze hangers
40
C B
LOADING When several levels of ladder are mounted on the same threaded rods, it is important to ensure that the total load on any pair of rods does not exceed the safe working load of the rods or their attachment points.
Ladder Width
40 40 50 60
41 100
F O SLOTS
48 120
3.0
R SLOTS
82
HOLES
15 3.0
T HOLES
15
M10 threaded rod M10 nut Washer Upper flange M10 nut Washer Lower flange
Load: ORB: 1000 N/pair ZRB: 4000 N/pair Load data apply only when fixed according to this method
73
[ SWIFTRACK CHANNEL ]
Swiftrack channel
Programme:
Type 41 x 41 mm unperforated 3000 mm Length Material/finishing Pregalvanised Hot dip galvanised Stainless steel 316 Pregalvanised Hot dip galvanised Stainless steel 316 Pregalvanised Hot dip galvanised Stainless steel 316 Pregalvanised Hot dip galvanised Stainless steel 316 Hot dip galvanised Stainless steel 316
41 x 41 mm perforated
3000 mm
41 x 21 mm unperforated
3000 mm
41 x 21 mm perforated
3000 mm
41 x 41 mm double
3000 mm
Characteristics
Legrand offers a complete range of strut profiles and fixing brackets for flexible installation and support of cable management systems in various applications. Using these materials, a strong support construction can always be built without drilling or welding. Future adjustments and extensions are always possible and the system is easy to mount and reusable. The programme is available in pregalvanised, hot dip galvanised and stainless steel 316 versions, ensuring a suitable solution for any situation.
74
Swiftrack channel
Easy to mount
Future adjustments and extensions are always possible NEW standard in 3 m length
75
Swiftrack channel
loading graph
PG
EG
100 23
Y SC203
Packaging
Ref.no.
Pregalvanised/electro-galvanised
Channel Length 3000 mm 41 x 21 mm Unperforated 41 x 21 mm Perforated 41 x 41 mm Unperforated 41 x 41 mm Perforated Long spring nut M6 M8 M10 M12 Short spring nut M6 M8 M10 M12 Plain nut M6 M8 M10 M12 End cap C-41 profile Plastic, white 41 x 21 mm 41 x 41 mm Cover 3000 x 31 mm Plastic, white
1
X
1 1 1
Y SC401
Cat. Nos.
Wt A (kg/m) (mm2)
Ixx (mm4)
Iyy (mm4)
ryy (mm)
100 100 100 100 100 100 100 100 100 100 100 100
PN 061 PN 081 PN 101 PN 121 PN 062 PN 082 PN 102 PN 122 PN 060 PN 080 PN 100 PN 120
SC 200 18 SC 203 16 SC 400 26 SC 403 24 SC 401 53 645 339300 8215 8215 230 177566 166 322 57221 2645 2909 133 88325 165 322 67157 2857 3772 145 88783 166 219 8960 794 961 64 49318 150 219 10779 862 1330 71 49776 151
1 1
SC 951 W SC 950 W
SC 952
Wt A Ixx Ztop
= weight of section (kg/m) = cross-sectional area (mm2) = moment of inertia = second moment of area (mm4) = section modulus about xx axis (mm3)
= radius of gyration (mm) = moment of inertia = second moment of area (mm4) = radius of gyration (mm) = about xx axis = about yy axis
76
HDG
Packaging
Ref.no.
Packaging
Ref.no.
1 1 1 1
1 1 1 1 1
SC 85241
1 1 1 SB 650 SB 651
SC 850
SC 851
1 1 1 1
SC 856
SB 705
SB 600
SB 704
SB 603
SB 700
SB 501
SB 502
3x 14 mm
SB 505
4x 14 mm
100 100 100 100 100 100 100 100 100 100 100 100
PN 061 G PN 081 G PN 101 G PN 121 G PN 062 G PN 082 G PN 102 G PN 122 G PN 060 G PN 080 G PN 100 G PN 120 G
Long spring nut M6 M8 M10 M12 Short spring nut M6 M8 M10 M12 Plain nut M6 M8 M10 M12 End cap C-41 profile Plastic, white 41 x 21 mm 41 x 41 mm Cover 3000 x 31 mm Plastic, white
SB 504
4x 14 mm
SB 703
4x 14 mm
1 1 1
1 1
SC 951 W SC 950 W
SB 524
SC 952
SC 855
SC 853
H = 45 mm
77
RVS SS
316 316
Packaging
Ref.no.
Packaging
Ref.no.
1 1 1 1
1 1 1 1 1
SC 85241 S
SC 850 S
1 1
SB 650 S SB 651 S
SC 851 S
1 1 1 1
1 2x 14 mm 3x 14 mm 1 4x 14 mm L-bracket 3x 14 mm T-bracket 4x 14 mm 1 1 SB 501 S Angled fixing 2x 14 mm 100 100 100 100 100 100 100 100 100 100 100 100
SC 856 S
SB 705 S
SB 600 S
SB 704 S
SB 603 S
SB 700 S
SB 502 S
3x 14 mm
PN 061 S PN 081 S PN 101 S PN 121 S PN 062 S PN 082 S PN 102 S PN 122 S PN 060 S PN 080 S PN 100 S PN 120 S
SB 505 S
4x 14 mm
SB 504 S
4x 14 mm
SB 703 S
4x 14 mm
1 1 1
1 1
SC 951 W SC 950 W
SB 524 S
SC 952
SC 855 S
SC 853 S
H = 45 mm
78
Swiftrack channel
technical information
Angled bracket 45
SB 524
HDG
316
SS
HDG
316
SS
HDG
316
SS
HDG
316
SS
Flat fixing
SB 50612 SB 507
U-type clamp
SB 514 SB 515
HDG
316
SS
HDG
316
SS
HDG
316
SS
HDG
316
SS
SB 508
HDG
316
SS
HDG
316
SS
HDG
L-bracket
SB 600
T-bracket
SB 603
316
SS
HDG
316
SS
Beam clamp
SC 85241 41 x 41 mm
Profile slides through the bracket Fixing by means of a clamping ring
HDG
316
SS
HDG
316
SS
Angled fixing
SB 501 SB 502
Max. 22 mm
Max. 22 mm
HDG
316
SS
HDG
316
SS
Beam clamp
SC 856 For fixing onto steel construction
SS
HDG
316
SS
SC 851
Engages by means of clamping around 41 x 41 mm profile and the steel construction to be fixed
SB 505
SB 504
Max. 22 mm
Max. 13 mm
HDG
316
SS
HDG
316
SS
HDG
316
SS
HDG
316
SS
SB 703
U-base plate
SB 705 U-model; 82 x 41 mm
HDG
316
SS
316
SS
HDG
316
SS
T-bracket
HDG
316
SS
HDG
316
SS
SB 700 Opening = 43 x 41 mm 8x 14 mm
SB 512
HDG HDG SS
316
SS
316
79
Swiftrack channel
technical information
Dimensions
C-profile 41 x 21 mm; unperforated
22
21 41
80
40
41 x 21 mm; perforated
11 x 25 50 22
40
SB 502; 99 x 40 mm
43
21 41
54
14 99 40 14 40
41 x 41 mm; unperforated
22
SB 505; 137 x 40 mm
41
SB 504; 99 x 88 mm
88
56
41
99 137 14 14 40 40
41 x 41 mm; perforated
28 x 14 50 22
SB 703; 99 x 88 mm
41
88
41
99
41 x 41 mm; double
22
14 40
83
SB 511; 41 x 40 mm
14
40 48 41 21 54 41 41
40
SB 651; 41 x 41 mm
14
SB 512; 83 x 40 mm
14 40
47
83 41
175 175 23 45
SB 507; 85 x 40 mm
14
40 40
40 85
SC 853
80
SB 508; 130 x 40 mm
14
SB 509; 220 x 40 mm
14
40 130 220 40
90
45
80
>>>
SB 515; 141 x 41 mm
14
21 40 141
40 41 141
SB 516; 141 x 82 mm
14
SB 517; 193 x 41 mm
14
40 83 141
40 41 193
25
50
65
41 14
140 80
80
T-bracket SB 700
150 43 47 88 14 47
> Corrosivity of the flue gasses: UTE C 20 452 octane 76, < 5%
SC 950; 41 x 41mm
> Halogen-free > Moisture absorption < 1 % > Flame resistance: UL 94 V 2 > Resistance against external influences:
- Limited resistance to acids - Good resistance to bases, oils, greases petrochemical products, chlorine containing solvents
41 41 41
41
81