Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Flexible Roller Chain Couplings are composed of a double strand roller chain and two sprockets. Roller chain couplings have a torque capacity in excess of the torque normally transmitted by shafting which falls within the coupling bore range. Select the smallest coupling which will accommodate both shafts. For a reversing operation, shock or pulsating loads, or other severe operating conditions, select the next larger coupling size.
A cover should be used to assure maximum service life, particularly if the coupling operates at high speeds or under moist or abrasive conditions. For proper lubrication, fill the space between the cover and the coupling with soft to medium consistency bearing grease.
S e c t i o n E
Tsubaki coupling chains feature press fit center-link plates and single pin connectors.
Coupling Chain
4012CC 4014CC 4016CC 5014CC 5016CC 5018CC 6018CC 6022CC 8018CC 8022CC 10020CC 12018CC
Catalogue Number
Clip Clip Clip Clip Clip Clip Clip Clip Cotter Key Cotter Key Cotter Key Cotter Key
Weight (lbs.)
0.4 0.5 0.6 1.0 1.2 1.4 2.4 2.8 5.5 6.7 10.8 17.7
Sprockets E146
Tsubaki of Canada Limited, 1630 Drew Road, Mississauga, ON L5S 1J6 Tel: 905-676-0400 Fax: 905-676-0904 Toll-Free: 800-263-7088 www.tsubaki.ca e-mail: info@tsubaki.ca
Coupling Covers
4012 4014 4016 5014 5016 5018 6018 6022 8018 8022 10020 12018
Catalogue Number
Cover Cover Cover Cover Cover Cover Cover Cover Cover Cover Cover Cover
4012 4014 4016 5014 5016 5018 6018 6022 8018 8022 10020 12018
For Sizes
2.95 3.31 3.62 3.98 4.37 4.8 5.59 6.57 7.32 8.66 9.84 12.09
2.95 2.95 2.95 3.35 3.35 3.35 4.17 4.17 5.12 5.12 5.83 7.13
Weight (lbs.)
0.73 0.84 0.90 1.10 1.28 1.45 2.11 2.86 4.40 5.50 8.14 7.26
4012F 4014F 4016F 5014F 5016F 5018F 6018F 6022F 8018F 8022F 10020F 12018F
COUPLING O.D.
1 1
1.38 1.69 1.97 2.09 2.36 2.76 3.35 4.33 4.53 5.51 6.30 6.69
1.42 1.42 1.57 1.77 1.77 1.77 2.20 2.20 2.48 2.80 3.15 3.54
0.29 0.29 0.29 0.38 0.38 0.38 0.45 0.45 0.60 0.60 0.74 0.89
3.13 3.13 3.44 3.93 3.93 3.93 4.86 4.86 5.56 6.19 7.04 7.98
Coupling O.D.
2.40 2.72 3.03 3.39 3.78 4.17 5.04 5.98 6.69 7.99 9.17 10.08
S e c t i o n E
B L
Tsubaki of Canada Limited, 1630 Drew Road, Mississauga, ON L5S 1J6 Tel: 905-676-0400 Fax: 905-676-0904 Toll-Free: 800-263-7088 www.tsubaki.ca e-mail: info@tsubaki.ca
Sprockets E147
* Maximum bore suggested with standard keyway. ** Minimum clearance required to remove the coupling half by using the screws as jack screws.
C K
JA SH SK SF
* Maximum
1 1 2 2
Bore
2 2 3 4
1 1 1
Dimensions
C
1 1 1 2
2 3 4 5
Coupling O.D.
3 4 5 6
** K
1 1 2 2
Weight (lbs.)
B D
Bushing Data
Max. Bore
COUPLING O.D.
S e c t i o n E
* Space required to tighten bushing with shortened hex key. Space is also required to loosen screws to permit the removal of the hub by the puller. ** Space required to loosen bushing with shortened hex key using screws as jack screws. No puller is required.
Notes: TLH type Taper-Lock style bushing installs from the hub side of the flange. TLF type Taper-Lock style bushing installs from the face side.
1 1 2 3 3
Min. Bore
1 2 3 5 6
1 1 2 3
Dimensions 1 2
*J
**K
1 1 2 2
2 2 2 4 7
Coupling O.D.
3 4 5 7 9
Weight (lbs.)
K J
B L
Sprockets E148
Tsubaki of Canada Limited, 1630 Drew Road, Mississauga, ON L5S 1J6 Tel: 905-676-0400 Fax: 905-676-0904 Toll-Free: 800-263-7088 www.tsubaki.ca e-mail: info@tsubaki.ca
COUPLING O.D.