Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
CMP
CMP Type CXe Increased Safety (Type 'e') cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Braided, Pliable Wire Armour (PWA), Strip Armour and Steel Tape Armour (STA) cable providing an environmental seal on the cable outer sheath. The cable gland being suitable for armoured cables, provides mechanical cable retention and electrical continuity via armour wire termination. A detachable armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc., and re-connected with the same consummate ease. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. The CMP CXe Cable Gland is suitable for use with Increased Safety Type e and Flameproof Type d enclosures that are equipped with a secondary Increased Safety Type e terminal enclosure (i.e. Ex de) provided always that no source of ignition prevails and the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.
TECHNICAL DATA
Type Design Specification ATEX Certification Code of Protection Category Compliance Standards IECEx Approval Number Code of Protection Category Compliance Standards GOST R Certificate Number INMETRO Approval Certificate Number Code of Protection Category Compliance Standards Code of Protection Category Compliance Standards GGTN Permit Number GOST K Certificate Number RoK Permit for Use Number Lloyds Approval Number DNV Approval Number ABS Approval Number Continuous Operating Temperature Ingress Protection Rating Cable Gland Material Seal Material Cable Type Armour Clamping Sealing Technique Sealing Area(s) Optional Accessories CXe BS 6121:Part 1:1989, EN 50262:1999 SIRA06ATEX1097X ATEX II 2 GD Ex e II, Ex tD A21 IP66, Equipment Zone 1, Zone 2, Zone 21, & Zone 22 - Gas Groups IIA, IIB, IIC EN 60079-0:2004, EN 60079-7:2003, EN 61241-0:2004, EN 61241-1:2004 IECEx SIR 06.0042X Ex e II / Ex tD A21 IP66 IEC 60079-0:2004, IEC 60079-7:2001, IEC 61241-0:2004, IEC 61241-1:2004 LL POCC GB. 05.B01912 MC, AEX-7618-X BR Ex e II / IP66W IEC 60079-0/00, IEC 60079-7/2001, NBR/IEC 60529/2005 Ex e II U L L OCT P 52350.0-2005, OCT P 52350.7-2005 PPC 00-18262 KZ7500052.05.01.00063 08-067693 01/00172
U
C A
E-6157 01-LD 234401-PDA -60C to +130C IP66 Brass, Electroless Nickel Plated Brass, Aluminium, Stainless Steel CMP SOLO LSF Thermoplastic Elastomer Wire Braid Armour, Screened Flexible Wire Braid (e.g. CY / SY), Strip Armour, Pliable Wire Armour (PWA), Steel Tape Armour (STA) Detachable Armour Cone & AnyWay Universal Clamping Ring Unique CMP "LRS" Outer Seal (Load Retention Seal) Cable Outer Sheath Locknut, Shroud, Entry Thread Seal, Serrated Washer, Earth Tag, Adaptor/Reducer
B D
LL
05 Cable Gland Weight Kgs 0.054 0.054 0.059 0.112 0.128 0.128 0.168 0.224 0.231 0.360 0.344 0.466 0.395 1.346 1.575 2.322 3.400
www.cmp-products.com
122