Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Lips 4D650 / SCV56 208 rpm Lips 4D1095 / SCV85 144 rpm Lips 4D1000 / SCH85 135 rpm Lips 4D920 / SCH85 150 rpm
Note: The indicated BP values are calculated values, for a BP-guarantee these values have to be reduced with 2%.
WPNL Bullard pull guarantees subject to following conditions: Draught aft at least 5.8 m to the baseline Water depth at least 29 m ( 5 ! " the draught# Po$er to be measured b% &alibrated strain'gauges (ollard pull to be measured b% &alibrated load &ell $ith its highest a&&ura&% around ))2 t (SI# for the appli&able temperature range "he $ater&urrent shall not e!&eed *+5 ,not in an% dire&tion "he test shall be performed $ith a $ind speed not e!&eeding 5 m-s Minimum distan&e from ship.s stern to do&, $all at least )5* m /learan&e to the beam ($idth# of the ship should be at least one ships'length on either side 0udder angle to be ,ept &lose to 1ero Po$er on the t$o propellers should be about e2ual 3arge mo4ements and d%nami& 4ariations should be a4oided during the test 5f the no11le $ill not be supplied b% WP 63+ a manufa&tured freehanging )97 t%pe no11le should be applied+ $ith a minimum amount of anodes (ma! ) %ear#. "he stru&ture of the no11le in&l. the $elds should be finished smoothl% and the &orre&t profile of the )97 no11le should be applied. 8ull and no11le &lean and to be manufa&tured in a&&ordan&e $ith design dra$ings "he flo$ around the no11le should be free+ the no11le headbo! should not e!&eed )*9 of the no11le &ontour+"he no11le should be freehanging Propeller speed to be measured on the propeller shaft 5n &ase the guaranteed bollard pull is not a&hie4ed+ the ship%ard has to pro4e that the thrust dedu&tion does not e!&eed *.)**b% means of modeltests