Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
TH
FI LA RST TC H H AN FO D R LE SW F R IN E E G DO M A O R GN S ET
the first magnetic latch without visible door hardware for swing doors
IC
Key Features
AESTHETICS No visible door handle - a complete smooth wall surface. No visible striker plate when the door is closed. As a result you have a clean door & jamb. When open, there is no unsightly latch tongue protruding from the edge of the door - a clean look. FUNCTIONALITY To open the door, simply push the flap in and pull or push the door open. Push the door shut to close it - the magnetic latch will self engage once the magnetism of both the latch and striker meet. PROTRUDING LATCH TONGUE AND STRIKER PLATE There is no chance of catching clothes or arms on protruding latch tongues & striker plates as they do not exist with the BL004/BL005. PIVOT DOORS The BL004/BL005 is ideal for doors that swing in both directions due to the fact that the latch is not handed; this means that it will latch no matter which direction the door swings in. In addition, traditional solutions require a visible unsightly custom-made striker plate to be mounted to both sides of the door jamb. Not with the BL004/BL005 - you dont see it. WIDE DOOR JAMBS There is now no longer any need for wide, custom made striker plates. The BL002 tongue only engages when the magnetism of both the latch and striker meet. RELIABILITY Because the tongue engages due to the magnetic attraction to the cup in the striker plate (and not due to moving parts), it will, for all intents and purposes, never fail.
Now suitable for 36mm+ thick doors and with an ever smaller footprint
129.5
52 mm
45 mm
c1 c0 b a
20 mm 16 mm
c2 d
20 mm
c0 b
Quick Facts Reliability Minimum Door Thickness Visible Striker Plate Visible Latch Tongue Tongue Action Noise Emergency Release Place of Manufacture Manufacturers Guarantee Tested to over 400,000 cycles 36mm No No Silent Yes Italy 2 years
a 36 mm 38 mm 40 mm 42 mm 44 mm 46 mm 48 mm 50 mm
b =1/2(a-20) 8 mm 9 mm 10 mm 11 mm 12 mm 13 mm 14 mm 15 mm
52 mm
C0 3 mm 3 mm 3 mm 3 mm 3 mm 3 mm 4 mm 5 mm
45 mm
C1 3 mm 3 mm 3 mm 3 mm 3 mm 3 mm 4 mm 5 mm
C2 = c0 3 mm 3 mm 3 mm 3 mm 3 mm 3 mm 4 mm 5 mm
d = a-(2xc2) 30 mm 32 mm 34 mm 36 mm 38 mm 40 mm 40 mm 40 mm
Order Codes:
BL004 CR or SC - For Passage Doors - new BL005CR or SC - For Privacy Doors (includes privacy Snib) - new BIZ44 - Milling Tool - new
15 mm 50 mm 20 mm 15 mm 16 mm
40 mm
20 mm
Measurements: - Opening: 87mm x 45mm - Cover plate: 85.5mm x 43.5mm - Note: The cover plate is made to match the surface finish of the door panel and is adhered to the face plate of the BINS range mechanism.
45
BINS205
43 mm +
21
45
BINS210
48 mm +
45
32
21
38 to 42mm t h i c k d o o r s
43 to 47mm t h i c k d o o r s
48 to 50mm t h i c k d o o r s
45
45 3
38 mm+
Order Codes:
21
16 5 3mm+
21
16 5 14mm+
BINS200 - For doors 38 - 42mm thick - new BINS205 - For doors 43 - 47mm thick - new BINS210 - For doors 48 - 50mm thick - new BINS105 - Single Side only - new BIZ44 - Milling Tool - new
The BINS range invisible sliding door flush pulls have been specifically designed to provide a clean smooth contemporary
No-Ha by Bellevue - Smart Architectural ProductsSliding cupboard doors Hinged cupboard doors
Drawers
Note: The cover plate is made to match the surface finish of the Hinged cupboard doors Sliding cupboard doors
87 mm x 45 mm 85.5 mm x 43.5 mm
cupboard or drawer panel and is adhered to the face plate of the BINK250 mechanism
Drawers
BINK 250
45 19 7
Note: The cover plate is made to match the surface finish of the
87 mm x 45 mm 45 85.5 mm x 43.5 mm
cupboard or drawer panel and is adhered to the face plate of 24 the BINK250 mechanism
2
Nylon backplate
Note: The cover plate is made to match the surface finish of the
87 mm x 45 mm 85.5 mm x 43.5 mm
cupboard or drawer panel and is adhered to the face plate of the BINK250 mechanism
BINK 250
45 19 7
Order Codes:
2
45
2419 - 24mm thick - new BINK250 - For timber BIZ44 - Milling Tool - new
Used throughout Europe to achieve a blended wall and cupboard look, the No-Ha range of invisible handles meets todays minimalistic look and feel of modern architecture and Interior design. Now beeing used in residential and commercial projects throughout Australia and New Zealand.
Used On:
Swing Doors Sliding Doors Draws Cupboards Desks Kitchens Furniture WC doors Utility rooms Pantry doors Hidden rooms Cupboard draws Bathroom entry doors Doors in narrow hallways
Practical Application:
Push in the face plate, grab as you would a flush pull. Push or pull open the door or draw, then just let go. The spring loaded face plate bounces back into position. Its clean and invisible.
10
Notes:
11