Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Assembly Overview
Legend Plate (Optional)
0 1 2 3
Latch
Operator
4 5 6 7 8 9 10
Tested at 102000 Hz, 1.52 mm displacement (peak-to-peak) max./10 G max. for 3 hr duration, no damage Tested at 1/2 cycle sine wave for 11 ms; no damage at 100 G IP65/66 (Type 3/3R/4/4X/12/13) IP65/66 (Type 3/3R/4/12/13)
Momentary push buttons, momentary mushroom Multi-function, selector switch, key selector switch, selector jog, SensEjectTM key selector switch Non-illuminated push-pull E-stop Twist-to-release E-stop, illuminated push-pull E-stop, alternate action push buttons Potentiometer, toggle switch Flush/extended = 5 N, E-stop = 36 N Mushroom = 9 N Selector switch = 0.25 Nm (2.2 lbin) 1.7 Nm (15 lbin) 4.4 Nm (40 lbin) -25+70 C (-13+158 F) -40+85 C (-40+185 F) 5095% RH from 2560 C (77140 F)
Momentary mushroom operators are IP65. Plastic keyed operators are IP66, Type 4/13; not Type 4X. Limit of four contact blocks max. for these devices. Operating temperatures below 0 C (32 F) are based on the absence of freezing moisture and liquids, UL Recognized to 55 C (131 F) - Incandescent module max. 40 C (104 F).
Product Certifications
Certifications Standards Compliance CE Marked Terminal Identification Shipping Approvals RoHS UR/UL, CSA, CCC, CE NEMA ICS-5; UL 508, EN ISO 13850, EN 60947-1, EN 60947-5-1, EN 60947-5-5 EN/IEC 60947-1 ABS
11 12 13
www.ab.com/catalogs
Publication A117-CA001A-EN-P
10-67
Bulletin 800F
0
Standard contact block ratings Low voltage contact block ratings
Electrical Ratings A600, Q600 600V AC AC 15, DC 13 to IEC/EN 60947-5-1 and UL 508, 17V, 5 mA min. 5V, 1 mA DC min. C300, R150, AC 15, DC 13 to EN 60947-5-1 and UL 508 Nominal Voltage 24120V AC/DC 24V AC 24V DC 120V AC 240V AC Range 20132V AC/DC 1029V AC 1030V DC 102132V AC 204264V AC Current Draw 15 mA (AC), 12 mA (DC) 31 mA 24 mA 6 mA 6 mA Screw terminal = 690V, spring-clamp = 300V #1812 AWG (0.752.5 mm2) Max. (2) #14 AWG or (1) #12 AWG #1814 AWG (0.751.5 mm2) One per spring clamp, two spring clamps per terminal 0.70.9 Nm (68 lbin) 2500V for one minute Standard blocks External short circuit protection Low voltage contact blocks Electrical shock protection Mechanical Ratings 10 A type gL/gG cartridge fuse to EN 60269-2-1 or gN (Class J to UL 248-8 or Class C to UL 248-4) 6 A type gL/gG cartridge fuse to EN 60269-2-1 or gN (Class J to UL 248-8 or Class C to UL 248-4) Finger-safe conforming to IP2X Tested at 102000 Hz, 1.52 mm displacement (peak-to-peak) max./10 G max. 6 hr Tested at 1/2 cycle sine wave for 11 ms and no damage at 100 G max. 10 000 000 cycles Slow double make and break Slow double make and break positive opening N.O. Frequency 50/60 Hz, DC 50/60 Hz DC 50/60 Hz 50/60 Hz
1
LED Module Ratings
2 3 4 5 6 7 8
Thermal current Insulation voltage (Ui) Wire capacity (screw terminal) Wire capacity (spring-clamp terminal) Recommended tightening torque on screw terminals Dielectric strength (minimum)
Double break / double make, early make Double break / double make, late break positive opening
1.5 mm (0.060 in.) 2.5 mm (0.1 in.) 3.4 N 56.5 N Illumination 525 nm 629 nm 590 nm 470 nm 780 780 600 168 360 Materials mcd mcd mcd mcd mcd
Push button travel to change electrical state Operating forces (typical) Single circuit contact block Dual circuit contact block Green Red Yellow Blue White Green Red Yellow Blue White
9 10
11 12 13
Incandescent maximum wattage Springs Electrical contacts Terminals Standard Low voltage Screw Spring-clamp
2.6 W Stainless steel and zinc coated music wire Silver-nickel Gold-plated over silver Brass Silver-plated brass
Low voltage contacts are recommended for applications below 17V, 5 mA. Wires less than #18 AWG (0.75 mm2) may not hold in terminal securely.
www.ab.com/catalogs
10-68
Publication A117-CA001A-EN-P
Bulletin 800F
0 1 2 3 4 5 6 7 8 9 10 11 12 13
Illuminated push button, illuminated momentary mushroom, illuminated selector switch Polyamide Non-illuminated push button, illuminated push button, momentary mushroom, selector switch, key selector switch, push/twist-to-release E-stop, key E-stop, push/pull Glass-filled polyamide mushroom, multi-function, reset Pilot light, reset jam nut, reset pushers All metal operators Illuminated push button, pilot light All plastic operators All metal operators LED module, incandescent module, contact blocks LED module, incandescent module, contact blocks LED module, incandescent module, contact blocks Incandescent module Incandescent module, LED module Contact blocks Contact blocks Contact blocks Toggle Switch, illuminated push button, non-illuminated push button, multi-function illuminated and non-illuminated Glass-filled PBT Zinc Polycarbonate Glass-filled polyamide Glass-filled polyamide Chromated zinc Glass-filled polyamide Chromated zinc + stainless steel PBT/polycarbonate blend Aluminum Zinc-plated steel with chromate Brass with silver-nickel contacts Stainless steel Brass Glass-filled polyamide Gold-plated silver-nickel contacts Gold-plated silver-nickel contacts Brass with silver-nickel contacts Automotive industry acceptable silicone
www.ab.com/catalogs
Publication A117-CA001A-EN-P
10-69
Bulletin 800F
0 1
Flush Operator Cat. No. 800FM-LF4 Extended Operator Cat. No. 800FP-LE3 Flush Plastic Color Green Red Yellow Clear 1 Pkg. Quantity Cat. No.
800FP-LF3 800FP-LF4 800FP-LF5 800FP-LF7
Guarded Operator Cat. No. 800FP-LG3 Extended Metal Plastic Cat. No.
800FP-LE3 800FP-LE4 800FP-LE5 800FP-LE7
2 3 4
Cat. No.
800FM-LF3 800FM-LF4 800FM-LF5 800FM-LF7
800F
a
Operator Construction Code P M Description Round plastic operator (IP66, Type 4/4X/13) Round metal operator (IP66, Type 4/13) Code 0 3 4 5 6 7 9
P LE
a c
Color Cap 1 Color Amber Green Red Yellow Blue Clear No cap
3
c d d
Packaging Code Blank BP Description 1 per package 10 per package
5 6 7 8
b
Operator Type Code LF LE LG Description Flush Extended Guarded
1 For custom laser-engraved operator, order operator with applicable lens cap color plus custom laser-engraved diffuser; see page 10-115.
When using LED for illumination, a white LED is recommended. Only available with no color cap (9 from Table c).
6. . . 120V AC/DC
X1 Cat _ _-D _ C X2
9 10
X2
L1
L2
L1, +
L2, -
X4
X1
X4
X4
X1
X3
X2
X3
AC
Signal Segnale Sinal Senl
X4
-
X3
X2
X1
X4
AC DC
X4
X1
11 12 13
X3
X2
X3
X3
X2
www.ab.com/catalogs
Publication A117-CA001A-EN-P
10-75