Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
CAMERON
CAMERON
BRP-CAM-FWBV-01
11/11-SWP-3M
TABLE OF CONTENTS
BRP-CAM-FWBV-01
11/11-SWP-3M
CAMERON
Camerons Valves & Measurement (V&M) group is a leading provider of valves and measurement
systems to the oil and gas industry. The groups products are primarily used to control, direct
and measure the flow of oil and gas as it is moved from individual wellheads through flow lines,
gathering lines and transmission systems to refineries, petrochemical plants and industrial centers
for processing.
The Engineered & Process Valves division provides a wide range of valves for use in natural gas,
LNG, crude oil and refined products transmission lines. The traditional CAMERON
fully-welded ball valve product line has been combined with the GROVE, RING-O, TOM
WHEATLEY, ENTECH and TK product lines. This broad offering has significantly strengthened
Camerons ability to serve as a single source for a wide scope of customer requirements. The
division also provides critical service valves for refinery, chemical and petrochemical processing
businesses and for associated storage terminal applications, particularly through the ORBIT and
GENERAL VALVE product lines. These brands are complimented by WKM, TBV, and
TEXSTEAM valve products and considerably expand the scope of this divisions product offerings.
CAMERON
BRP-CAM-FWBV-01
11/11-SWP-3M
Gas transmission
NGL plants
Products pipeline
NGL pipeline
Measurements skids
Compressor stations
Dehydration systems
CO2 services
Offshore
1400 mm).
Subsea
Dryer service
The distinctive design of the Cameron fully welded ball valve gives it maximum strength at minimum weight as well as
maximum resistance both to pipeline pressures and stresses. The compact, spherical design also eliminates body flanges,
thus reducing overall size and potential leak paths.
PTFE lip seal
BRP-CAM-FWBV-01
11/11-SWP-3M
CAMERON
Sizes
With the body cavity vented all line pressure to the stem
Pressure Classes
maintenance procedures.)
Operating Temperatures
End Connections
Body Styles
Fully welded
Standard Material
Optional Materials
CAMERON
BRP-CAM-FWBV-01
11/11-SWP-3M
Double Block-and-Bleed
Whether in the fully open or fully closed position, pressure on each side of the
ball is blocked from the body cavity by the seat ring.
The body cavity can then be bled down or drained through the body port.
When you block-and-bleed a Cameron ball valve the following can be
accomplished:
BRP-CAM-FWBV-01
11/11-SWP-3M
CAMERON
Prevents Build Up
In some services a valve can experience harmful sediment
build up around the seat ring. This can cause the seat to
stick and not seal properly. The CAMERON fully welded
ball valves, with exclusive rotating seat, can handle these
harsher services. As the seat rotates it will prevent any
build up, or breaks up existing build up.
CAMERON
BRP-CAM-FWBV-01
11/11-SWP-3M
LINE
PRESSURE
TRAPPED
LINE
PRESSURE
ESCAPING
PRESSURE
Double Acting
Conventional Upstream Sealing
With the upstream pressure, the bidirectional body to
seat seal is pushed toward the front sealing face of its
retaining pocket. This creates an unbalanced pressure
annulus between the body seal and the inside diameter
of the seat insert, forcing the seat insert against the ball.
Downstream Sealing
With the downstream pressure, the bidirectional body to seat
seal is pushed toward the back sealing face of its retaining
pocket. This creates an unbalanced pressure annulus between
the outside diameter of the seat insert and the body seal
diameter, also forcing the seat insert against the ball.
Metal-to-Metal
For Severe Service Applications
Where a soft seat insert would be unsuitable, a metal-tometal design can be provided. In this design both the seat
and the ball are coated with Tungsten Carbide which is
resistant to corrosion and wear making it suitable for
abrasive services. This type of seat is upstream sealing and
incorporates internal relief of body pressure.
Metal-To-Metal - T34
SIZES
SIZES
PRESSURE CLASSES
PRESSURE CLASSES
OPERATING TEMPERATURES
OPERATING TEMPERATURES
CAMERON
10 CAMERON
BRP-CAM-FWBV-01
11/11-SWP-3M
frequency of operation.
5. Type of operator.
pneumatic).
80
06
Classification
Pressure Classification
Bore
End Connections
Operator
1
Trim
80
ASME/ANSI
01
ASME/ANSI
150
Full
Lever
Standard (150-1500)
81
API
03
ASME/ANSI
300
Reduced
1A
Extension lever
82
AFNOR
04
ASME/ANSI
400
Venturi
Worm gear
83
DIN
06
ASME/ANSI
600
All Others
2A
84
UNI
09
ASME/ANSI
900
Subsea gear
123
15
ASME/ANSI
1500
4A
Pressure regulating
(150-1500)
25
ASME/ANSI
2500
212
NACE (150-2500)
20
213
NACE (2000-5000)
30
50
RF/RF
Direct stem
API 2000
WE/WE
7A
API 3000
RF/WE
Worm gear/adapted
API 5000
RTJ/RTJ
RTJ/WE
All Others
214
Tefzel/NACE (150-1500)
215
Tefzel/NACE (2000-5000)
8A
Extension worm
gear/adapted
216
NACE/Lo-temp (150-2500)
22
Square
217
NACE/Lo-temp (2000-5000)
22A
Extension square
Nut/Mtg/Flg
222
NACE/Hi-temp (150-600)
259
23
23A
BRP-CAM-FWBV-01
11/11-SWP-3M
CAMERON 11
Pressure range
Temperature range
Body
End connection
Ball
Seat ring
AISI 1040
AISI 1040
Stem seals
PTFE
Lip seals
PTFE
Nylon
Torque Information
Pressure Rating
Temperature Rating
Regular
Standard
212
API 2000-5000
213
Low temperature
216
API 2000-5000
217
High temperature
222
Tefzel
140
214
(Acidizing)
API 2000-5000
108
215
Tefzel
223
Low temperature
API 2000-5000
276
504
12 CAMERON
BRP-CAM-FWBV-01
11/11-SWP-3M
Code Identification:
Code Identification:
G Handwheel diameter
B Bore diameter
C Centerline to bottom
Sphere dimension
H
G
D1
D2
SD-24027
SD-24028
SD-24029
BRP-CAM-FWBV-01
11/11-SWP-3M
CAMERON 13
D1 D2
Dimensions
SIZE in.
Nom
Dia.
Ball
Bore
B
Stem
Size
2
3
4
6
8
10
12
14
16
18
20
22
24
26
28
30
34
36
40
42
48
2.06
3.13
4.06
6.00
8.00
10.00
12.00
13.25
15.25
17.25
19.25
21.25
23.25
25.00
27.00
29.00
32.75
34.50
38.50
41.25
46.50
1.0
1.0
1.5
1.5
2.0
2.0
3.0
3.0
3.0
4.0
4.0
4.0
4.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
Flanged End n
RF
RTJ
Dia.
Length Length
l
A
A
D1
7.0
8.0
9.0
15.5
18.0
21.0
24.0
27.0
30.0
34.0
36.0
40.0
42.0
45.0
49.0
51.0
58.0
60.0
69.0
72.0
80.0
7.5
8.5
9.5
16.0
18.5
21.5
24.5
27.5
30.5
34.5
36.5
40.5
42.5
-
6.00
7.50
9.00
11.00
13.50
16.00
19.00
21.00
23.50
25.00
27.50
29.50
32.00
34.25
36.50
38.75
43.75
46.00
50.75
53.00
59.50
Dia.
D2
2.06
3.13
4.06
6.00
8.00
10.00
12.00
13.25
15.25
17.25
19.25
21.25
23.25
25.00
27.00
29.00
32.75
34.50
38.50
41.25
46.50
C.L.
Diameter
C.L. to
Weld
Body
Lever
to
Handwheel Handwheel
End n
Sphere Length
Length Bottom
for Gear
C.L.
A
C
E
L
G
H
11.0u
12.5u
14.0
18.0
21.5u
23.5u
26.5u
28.5*
30.5*
33.5*
35.5*
38.5*
42.0*
44.5*
47.0*
49.0*
54.5*
56.5*
65.0*
66.5*
76.0*
3.94
5.12
5.94
7.91
10.00
12.12
14.50
14.64
16.01
19.25
20.81
22.28
23.69
26.49
27.88
29.51
32.16
33.76
40.14
41.78
45.90
5.00
6.75
8.50
11.25
15.50
18.50
22.36
24.00
26.32
29.20
32.27
36.00
38.76
41.75
44.86
47.90
53.64
56.83
65.00
68.60
77.00
24
24
36
-
12
18
18
18
18
18
24
18
18
18
24
24
24
30
36
30
42
-
6.34
7.44
8.43
10.43
12.55
14.54
20.14
21.16
22.52
26.19
27.75
29.22
30.63
34.34
35.72
37.37
40.01
41.60
50.25
51.89
-
Approximate
Valve Weight
lb.
Flange
Weld
39
62
115
200
428
705
1210
1330
1650
2325
3310
3875
4620
6400
7200
9500
13500
15150
-
SIZE mm
kg
50
52
25
178
191
152
52
279u
100
127
610
161
18
80
80
25
203
216
191
80
318u
130
171
610
189
28
100
103
38
229
241
229
103
356
151
216
914
214
52
150
152
38
394
406
279
152
457
201
286
305
265
91
200
203
51
457
470
343
203
546u
254
394
457
319
194
250
254
51
533
546
406
254
597u
308
470
457
369
320
300
305
76
610
622
483
305
673u
368
568
457
512
549
350
337
76
686
699
533
337
724*
372
610
457
537
603
400
387
76
762
775
597
387
775*
407
669
457
572
748
450
438
102
864
876
635
438
851
489
742
610
665
1055
500
489
102
914
927
699
489
902
529
820
457
705
1501
550
540
102
1016
1029
749
540
978*
566
914
457
742
1758
600
591
102
1067
1080
813
591
1067*
602
985
457
778
2096
650
635
127
1143
870
635
1130*
673
1060
610
872
2903
700
686
127
1245
927
686
1194*
708
1139
610
907
3266
750
737
127
1295
984
737
1245*
750
1217
610
949
4309
850
832
127
1473
1111
832
1384*
817
1362
762
1016
6123
900
876
127
1524
1168
876
1435*
858
1443
914
1057
6872
1000
978
191
1753
1289
978
1651*
1020
1651
762
1276
1050
1048
191
1829
1346
1048
1689*
1061
1742
1067
1318
1200
1181
191
2032
1511
1181
1930*
1166
1956
n Length (A) of a weld x flanged end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.
u Length exceeds specified dimensions in API 6D/ISO 14313.
l Dimensions of 22 in. (550 mm) flanges are per MSS-SP-44 and 26 in. (650 mm) through 42 in. (1050 mm) flanges are per ASME B16.47 series A.
14 CAMERON
45
75
100
225
450
650
1100
1230
1550
2200
2760
3510
4260
5600
6500
8800
12000
14500
-
BRP-CAM-FWBV-01
11/11-SWP-3M
20
34
45
102
204
295
499
558
703
998
1252
1592
1932
2540
2948
3992
5443
6577
-
H
G
D1
D2
Dimensions
SIZE in.
Nom
Dia.
Ball
Bore
B
Stem
Size
3
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
36
42
2.06
3.13
4.06
6.00
8.00
10.00
12.00
13.25
15.25
17.25
19.25
21.25
23.25
25.00
27.00
29.00
32.75
34.50
1.0
1.0
1.5
1.5
2.0
2.0
3.0
3.0
3.0
4.0
4.0
4.0
4.0
5.0
5.0
5.0
5.0
5.0
Flanged End n
RF
RTJ
Dia.
Length Length
A
A
D1l
8.0
9.0
15.5
18.0
21.0
24.0
27.0
30.0
34.0
36.0
40.0
42.0
45.0
49.0
51.0
54.0
60.0
72.0
8.5
9.5
16.0
18.5
21.5
24.5
27.5
30.5
34.5
36.5
40.5
42.5
-
7.50
9.00
11.00
13.50
16.00
19.00
21.00
23.50
25.00
27.50
29.50
32.00
34.25
36.50
38.75
41.75
46.00
53.00
Dia.
D2
3.13
4.06
6.00
8.00
10.00
12.00
13.25
15.25
17.25
19.25
21.25
23.25
25.00
27.00
29.00
32.75
34.50
41.25
Weld
C.L. to Body
End n
Bottom Sphere
Length
A
C
E
11.0u
12.5u
14.0u
18.0
21.5u
23.5u
26.5u
28.5*
30.5*
33.5*
35.5*
38.5*
42.0*
44.5*
47.0*
49.0*
54.5*
56.5*
3.94
5.12
5.94
7.91
10.00
12.12
14.50
14.64
16.01
19.25
20.81
22.28
23.69
26.49
27.88
29.51
32.16
33.76
5.00
6.75
8.50
11.25
15.50
18.50
22.36
24.00
26.32
29.20
32.27
36.00
38.76
41.75
44.86
47.90
53.64
56.83
Lever
Length
L
24
24
36
-
Diameter
C.L. to
Handwheel Handwheel
for Gear
C.L.
G
H
12
18
18
18
18
18
24
18
18
18
24
24
24
30
36
6.34
7.44
8.43
10.43
12.55
14.54
20.14
21.16
22.52
26.19
27.75
29.22
30.63
34.34
35.72
37.37
40.01
41.60
Approximate
Valve Weight
lb.
Flange Weld
55
100
170
345
620
950
1280
1450
1510
2410
3450
4300
5400
7040
8900
9600
14000
-
SIZE mm
50
87
150
290
525
840
1160
1330
1700
2300
3050
3650
5100
6100
7600
8500
12500
-
kg
80
52
25
203
216
191
80
279u
100
127
610
161
25
100
80
25
229
241
229
103
318u
130
172
610
189
45
150
103
38
394
406
279
152
356u
151
216
914
214
77
200
152
38
457
470
343
203
457
201
286
305
265
156
250
203
51
533
546
406
254
564u
254
394
457
319
281
300
254
51
610
622
483
305
597u
308
470
457
369
431
350
305
76
686
699
533
337
673u
368
568
457
512
581
400
337
76
762
775
597
387
724*
372
610
457
537
658
450
387
76
864
876
635
438
774*
407
669
457
572
685
500
438
102
914
927
699
489
851*
489
741
610
665
1093
550
489
102
1016
1029
749
540
902*
529
820
457
705
1565
600
540
102
1067
1080
813
591
978*
566
914
457
742
1950
650
591
102
1143
870
635
1067*
602
985
457
778
2449
700
635
127
1245
927
686
1130*
673
1061
610
872
3193
750
686
127
1295
984
737
1194*
708
1139
610
907
4037
800
737
127
1372
1048
832
1245*
750
1217
610
949
4355
900
832
127
1524
1168
876
1384*
817
1363
762
1016
6350
1050
876
127
1829
1346
1048
1435*
858
1444
914
1057
n Length (A) of a weld x flanged end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.
u Length exceeds specified dimensions in API 6D/ISO 14313.
l
Dimensions of 22 in. (550 mm) flanges are per MSS-SP-44 and 26 in. (650 mm) through 42 in. (1050 mm) flanges are per ASME B16.47 series A.
Note: Venturi opening or other reduced bore valves are available upon request.
BRP-CAM-FWBV-01
11/11-SWP-3M
23
39
68
132
238
381
526
603
771
1043
1383
1656
2313
2767
3447
3856
5670
-
CAMERON 15
G
D1 D2
H
C
Dimensions
SIZE in.
Nom
Dia.
Ball
Bore
B
Stem
Size
2
3
4
6
8
10
12
14
16
18
20
22
24
26
28
30
34
36
40
42
48
2.06
3.13
4.06
6.00
8.00
10.00
12.00
13.25
15.25
17.25
19.25
21.25
23.25
25.00
27.00
29.00
32.75
34.50
38.50
41.25
46.50
1.0
1.0
1.5
1.5
2.0
2.0
3.0
3.0
3.0
4.0
4.0
4.0
4.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
Flanged End n
RF
RTJ
Dia.
Length Length
l
A
A
D1
8.50
11.125
12.00
15.875
19.75**
22.375
25.50
30.00
33.00
36.00
39.00
43.00
45.00
49.00
53.00
55.00
64.00
68.00
74.00
76.00
86.00
9.125
11.750
12.625
16.500
20.375
23.000
26.125
30.625
33.625
36.625
39.750
43.875
45.875
50.000
54.000
56.000
65.125
69.125
-
6.50
8.25
10.00
12.50
15.00
17.50
20.50
23.00
25.50
28.00
30.50
33.00
36.00
38.25
40.75
43.00
47.50
50.00
48.75
50.75
57.75
Dia.
D2
2.06
3.13
4.06
6.00
8.00
10.00
12.00
13.25
15.25
17.25
19.25
21.25
23.25
25.00
27.00
29.00
32.75
34.50
38.50
41.25
46.50
Diameter
C.L. to
Weld
C.L. to Body
Lever
Handwheel Handwheel
End n
Bottom Sphere Length
for Gear
C.L.
Length
A
C
E
L
G
H
11.0u
12.5u
14.0u
18.0
21.5u
23.5u
26.5u
28.5*
30.5*
33.5*
35.5*
38.5*
42.0*
44.5*
47.0*
49.0*
54.5*
56.5*
65.0*
66.5*
76.0*
3.94
5.12
5.94
7.91
10.00
12.12
14.50
14.64
16.01
19.25
20.81
22.28
23.69
26.49
27.88
29.51
32.16
36.80
40.14
41.78
45.90
5.00
6.75
8.50
11.25
15.50
18.50
22.36
24.00
26.32
29.20
32.27
36.00
38.76
41.75
44.86
47.90
53.64
56.83
65.00
68.60
77.00
24
24
36
-
12
18
18
18
24
24
24
18
24
24
24
24
30
36
24
36
42
-
6.34
7.44
8.43
10.43
12.55
14.54
20.14
21.16
22.52
26.19
27.75
29.22
30.63
34.34
35.72
37.37
40.01
46.92
50.25
51.89
-
Approximate
Valve Weight
lb.
Flange
Weld
50
80
125
250
455
750
1275
1370
1725
2700
3400
4050
5390
6625
7725
10000
14700
16300
-
45
75
100
225
450
650
1100
1230
1550
2200
2760
3510
4260
5600
6500
8800
12000
15500
-
SIZE mm
kg
50
52
25
216
232
165
52
279u
100
127
610
161
23
80
80
25
283
298
210
80
318u
130
172
610
189
36
100
103
38
305
321
254
103
356u
151
216
914
214
57
150
152
38
403
419
318
152
457
201
286
305
265
113
200
203
51
502**
518
381
203
546u
254
394
457
319
206
250
254
51
568
584
445
254
597u
308
470
610
369
340
300
305
76
648
664
521
305
673u
368
568
457
512
578
350
337
76
762
778
584
337
724*
372
610
610
537
621
400
387
76
838
854
648
387
775*
407
669
610
572
782
450
438
102
914
930
711
438
851*
489
742
610
665
1225
500
489
102
991
1010
775
489
902*
529
820
457
705
1542
550
540
102
1092
1114
838
540
978*
566
914
610
742
1837
600
591
102
1143
1165
914
591
1067*
602
985
610
778
2445
650
635
127
1245
1270
972
635
1130*
673
1060
610
872
3005
700
686
127
1346
1372
1035
686
1194*
708
1139
610
907
3504
750
737
127
1397
1422
1092
737
1245*
750
1217
762
949
4536
850
832
127
1626
1654
1207
832
1384*
817
1362
914
1016
6668
900
876
191
1727
1756
1270
876
1435*
935
1443
610
1192
7394
1000
978
191
1880
1238
978
1651*
1020
1651
914
1276
1050
1048
191
1930
1289
1048
1689*
1061
1742
1067
1318
1200
1181
191
2184
1467
1181
1930*
1166
1956
n Length (A) of a weld x flanged end valve is one half the sum of length (A) of a weld end and a flanged end of the same size and rating.
* Short pattern.
u Length exceeds specified dimensions in API 6D/ISO 14313.
l
Dimensions of 22 in. (550 mm) flanges are per MSS-SP-44 and 26 in. (650 mm) through 42 in. (1050 mm) flanges are per ASME B16.47 series A.
** Prior to 1/1/98 - manufactured to 16.5 in. (419 mm) short pattern length.
16 CAMERON
BRP-CAM-FWBV-01
11/11-SWP-3M
20
34
45
102
204
295
499
558
703
998
1252
1592
1932
2540
2948
3992
5443
7031
-
H
G
D1
D2
Dimensions
SIZE in.
Dia.
Ball
Bore
B
Stem
Size
3
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
36
42
2.06
3.13
4.06
6.00
8.00
10.00
12.00
13.25
15.25
17.25
19.25
21.25
23.25
25.00
27.00
29.00
32.75
34.50
1.0
1.0
1.5
1.5
2.0
2.0
3.0
3.0
3.0
4.0
4.0
4.0
4.0
5.0
5.0
5.0
5.0
7.5
Nom
Flanged End n
RF
RTJ
Dia.
Length Length
l
A
A
D1
11.125
12.00
15.875
19.75**
22.375
25.50
30.00
33.00
36.00
39.00
43.00
45.00
49.00
53.00
55.00
60.00
68.00
76.00
11.75
12.625
16.500
20.375
23.000
26.125
30.625
33.625
36.625
39.750
43.875
45.875
50.000
54.000
56.000
61.125
69.125
-
8.25
10.00
12.50
15.00
17.50
20.50
23.00
25.50
28.00
30.50
33.00
36.00
38.25
40.75
43.00
45.25
50.00
50.75
Dia.
Diameter
C.L. to
Weld
C.L.
Body
Lever Handwheel Handwheel
to
End n
Sphere Length
for Gear
C.L.
Length Bottom
Approximate
Valve Weight
lb.
D2
Flange
Weld
3.13
4.06
6.00
8.00
10.00
12.00
13.25
15.25
17.25
19.25
21.25
23.25
25.00
27.00
29.00
32.75
34.50
41.25
11.0*
12.5u
14.0*
18.0*
21.5*
23.5*
26.5*
28.5*
30.5*
33.5*
33.5*
38.5*
42.0*
44.5*
47.0*
49.0*
54.5*
56.5*
3.94
5.12
5.94
7.91
10.00
12.12
14.50
14.64
16.01
19.25
20.81
22.28
23.69
26.49
27.88
29.51
32.16
36.80
5.00
6.75
8.50
11.25
15.50
18.50
22.36
24.00
26.32
29.20
32.27
36.00
38.76
41.75
44.86
47.90
53.64
56.83
24
24
36
-
12
18
18
18
24
24
24
18
24
24
24
24
30
36
24
6.34
7.44
8.43
10.43
12.55
14.54
20.14
21.16
22.52
26.19
27.75
29.22
30.63
34.34
35.72
37.37
40.01
49.92
64
95
180
365
650
1050
1285
1660
1990
3100
3600
4500
5750
7260
9100
10150
15350
-
50
87
150
290
525
840
1160
1330
1700
2300
3050
3650
5100
6100
7600
8800
13000
-
SIZE mm
kg
80
52
25
283
298
210
80
279*
100
127
610
161
29
100
80
25
305
321
254
103
318u
130
171
610
189
43
150
103
38
403
419
318
152
356*
151
216
914
214
82
200
152
38
502**
518
381
203
457*
201
286
305
265
166
250
203
51
568
584
445
254
546*
254
394
457
319
295
300
254
51
648
664
521
305
597*
308
470
457
369
476
350
305
76
762
778
584
337
673*
368
568
457
512
583
400
337
76
838
854
648
387
724*
372
610
610
537
753
450
387
76
914
930
711
438
775*
407
669
610
572
903
500
438
102
991
1010
775
489
851*
489
742
610
665
1406
550
489
102
1092
1114
838
540
851*
529
820
457
705
1633
600
540
102
1143
1165
914
591
978*
566
914
610
742
2041
650
591
102
1245
1270
972
635
1067*
602
985
610
778
2608
700
635
127
1346
1372
1035
686
1130*
673
1060
610
872
3293
750
686
127
1397
1422
1092
737
1194*
708
1139
610
907
4128
800
737
127
1524
1553
1149
832
1245*
750
1217
762
949
4604
900
832
127
1727
1756
1270
867
1384*
817
1362
914
1016
6963
1050
876
191
1930
1289
1048
1435*
935
1443
610
1192
n Length (A) of a weld x flanged end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.
u Length exceeds specified dimensions in API 6D/ISO 14313.
l
Dimensions of 22 in. (550 mm) flanges are per MSS-SP-44 and 26 in. (650 mm) through 42 in. (1050 mm) flanges are per ASME B16.47 series A.
**
Prior to 1/1/98 - manufactured to 16.5 in. (419 mm) short pattern length.
Note: Venturi opening or other reduced bore valves are available upon request.
BRP-CAM-FWBV-01
11/11-SWP-3M
23
39
68
132
238
381
526
603
771
1043
1383
1656
2313
2767
3447
3992
5897
-
CAMERON 17
D1 D2
Dimensions
SIZE in.
Nom
Dia.
Ball
Bore
B
2
3
4
6
8
10
12
14
16
18
20
22
24
26
28
30
34
36
40
42
48
2.06
3.13
4.06
6.00
8.00
10.00
12.00
13.25
15.25
17.25
19.25
21.25
23.25
25.00
27.00
29.00
32.75
34.50
38.50
41.25
46.50
Stem
Size
Flanged End n
RF
RTJ
Dia.
Length Length
A
A
D1l
Dia.
Diameter
C.L. to
Weld
C.L.
Body
Lever Handwheel Handwheel
End n
to
Sphere Length
for Gear
C.L.
Length Bottom
Approximate
Valve Weight
lb.
D2
Flange
Weld
4.06
6.00
8.00
10.00
12.00
13.25
15.25
17.25
19.25
21.25
23.25
25.00
27.00
29.00
32.75
34.50
38.50
41.25
46.50
14.0*
18.0*
21.5*
23.5*
26.5*
28.5*
30.5*
33.5*
35.5*
38.5*
42.0*
44.5*
47.0*
49.0*
54.5*
56.5*
65.0*
66.5*
76.0*
5.94
7.91
10.00
12.12
14.50
14.64
17.84
19.25
22.11
23.63
25.05
26.49
27.88
29.51
35.19
36.80
40.14
41.78
47.98
8.50
11.25
15.50
18.50
22.36
24.00
26.32
29.20
32.27
36.00
38.76
41.75
44.86
47.90
53.64
56.83
65.00
68.60
77.00
48
-
12
18
24
18
24
18
24
24
24
24
24
30
36
30
30
42
42
-
8.43
10.43
12.55
14.54
20.14
21.16
24.78
26.19
30.00
31.53
32.95
34.34
35.72
37.37
45.31
46.92
50.25
51.89
-
150
300
550
850
1400
1650
2225
2850
3750
4750
5600
7100
8560
10600
15400
18000
25500
28750
-
100
225
450
650
1100
1230
1770
2200
3000
3950
4750
5600
6500
8800
12300
15500
22250
24750
-
SIZE mm
kg
50
52
Use ASME/ANSI Class 600 Valves (PN 100)
80
80
Use ASME/ANSI Class 600 Valves (PN 100)
100
103
38
406
410
254
103
356*
151
216
1219
214
68
150
152
38
495
498
318
152
457*
201
286
305
265
136
200
203
51
597
600
381
203
546*
254
394
457
319
249
250
254
51
673
676
445
254
597*
308
470
610
369
386
300
305
76
762
765
521
305
673*
368
568
457
512
635
350
337
76
826
829
584
337
724*
372
610
610
537
748
400
387
102
902
905
648
387
775*
453
669
457
629
1009
450
438
102
978
981
711
438
851*
489
742
610
665
1293
500
489
127
1054
1060
775
489
902*
562
820
610
762
1701
550
540
127
1143
1153
838
540
978*
600
914
610
801
2155
600
591
127
1232
1241
914
591
1067*
636
985
610
837
2540
650
635
127
1308
1321
9712
635
1130*
673
1060
610
872
3221
700
686
127
1397
1410
1035
686
1194*
708
1139
762
907
3883
750
737
127
1524
1537
1092
737
1245*
750
1217
914
949
4808
850
832
191
1778
1794
1207
832
1384*
894
1362
762
1151
6985
900
876
191
1880
1895
1270
876
1435*
935
1443
762
1192
8165
1000
978
191
1981
1270
978
1651*
1020
1651
1067
1276
11567
1050
1048
191
2057
1321
1048
1689*
1061
1742
1067
1318
13041
1200
1181
229
2311
1511
1181
1930*
1219
1956
n Length (A) of a weld x flanged end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.
l Dimensions of 22 in. (550 mm) flanges are per MSS-SP-44 and 26 in. (650 mm) through 42 in. (1050 mm) flanges are per ASME B16.47 series A.
18 CAMERON
BRP-CAM-FWBV-01
11/11-SWP-3M
45
102
204
295
499
558
803
998
1361
1792
2155
2540
2948
3992
5579
7031
10092
11226
-
H
G
D1
D2
Dimensions
SIZE in.
Nom
Dia.
Ball
Bore
B
3
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
36
42
2.06
3.13
4.06
6.00
8.00
10.00
12.00
13.25
15.25
17.25
19.25
21.25
23.25
25.00
27.00
29.00
32.75
34.50
Stem
Size
Flanged End n
RF
RTJ
Dia.
Length Length
A
A
D1l
Dia.
Weld
C.L.
Diameter
C.L. to
to
Body
Lever Handwheel Handwheel
End n
Length Bottom Sphere Length
for Gear
C.L.
Approximate
Valve Weight
lb.
D2
Flange
Weld
4.06
6.00
8.00
10.00
12.00
13.25
15.25
17.25
19.25
21.25
23.25
25.00
27.00
29.00
32.75
34.50
41.25
12.5*
14.0*
18.0*
21.5*
23.5*
26.5*
28.5*
30.5*
33.5*
35.5*
38.5*
42.0*
44.5*
47.0*
49.0*
54.5*
56.5*
5.12
5.94
7.91
10.00
12.12
14.50
14.64
17.84
19.25
22.11
23.63
25.05
26.49
27.88
29.51
35.19
36.80
6.75
8.50
11.25
15.50
18.50
22.36
24.00
36.32
29.20
32.27
36.00
38.76
41.75
44.86
47.90
53.64
56.83
24
48
-
12
18
24
18
24
18
24
24
24
24
24
30
36
30
30
7.44
8.43
10.43
12.55
14.54
20.14
21.16
24.78
26.19
30.00
31.53
32.95
34.34
35.72
37.37
45.31
46.92
125
189
424
608
1020
1490
1910
2400
3200
4250
5050
6250
7750
9500
11500
16000
-
87
150
290
525
840
1160
1330
1920
2650
3300
4300
5100
6100
7600
9350
13000
-
SIZE mm
kg
80
52
Use ASME/ANSI Class 600 Valves (PN 100)
100
80
25
406
410
254
103
318*
130
171
610
189
57
150
103
38
495
498
318
152
356*
151
216
1219
214
86
200
152
38
597
600
381
203
457*
201
286
305
265
192
250
203
51
673
676
445
254
546*
254
394
457
319
276
300
254
51
762
765
521
305
597*
308
470
610
369
463
350
305
76
826
829
584
337
673*
368
568
457
512
676
400
337
76
902
905
641
387
724*
372
610
610
537
866
450
387
102
978
981
711
438
775*
453
923
457
629
1089
500
438
102
1054
1060
775
489
851*
489
742
610
665
1451
550
489
127
1143
1153
838
540
902*
562
820
610
762
1928
600
540
127
1232
1241
914
591
978*
600
914
610
801
2291
650
591
127
1308
1321
972
635
1067*
636
985
610
837
2835
700
635
127
1397
1410
1035
686
1130*
673
1060
610
872
3515
750
686
127
1524
1537
1092
737
1194*
708
1139
762
907
4309
800
737
127
1651
1667
1149
832
1245*
750
1217
914
949
5216
900
832
191
1880
1895
1270
876
1384*
894
1362
762
1151
7257
1050
876
191
2057
1321
1048
1435*
935
1443
762
1192
n Length (A) of a weld x flanged end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.
l
Dimensions of 22 in. (550 mm) flanges are per MSS-SP-44 and 26 in. (650 mm) through 42 in. (1050 mm) flanges are per ASME B16.47 series A.
Note: Venturi opening or other reduced bore valves are available upon request.
BRP-CAM-FWBV-01
11/11-SWP-3M
39
68
132
238
381
526
603
871
1202
1497
1950
2313
2767
3447
4241
5897
-
CAMERON 19
Dimensions
SIZE in.
Flanged End n
RF
RTJ
Dia.
Length Length
A
A
D1l
Weld
C.L.
Diameter
C.L. to
Body
Lever
End n
to
Handwheel Handwheel
Sphere Length
Length Bottom
for Gear
C.L.
Approximate
Valve Weight
lb.
Nom
Dia.
Ball
Bore
B
Stem
Size
D2
Flange
Weld
2
3
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
40
42
44
48
56
2.06
3.13
4.06
6.00
8.00
10.00
12.00
13.25
15.25
17.25
19.25
21.25
23.25
25.00
27.00
29.00
30.75
32.75
34.5
38.5
41.25
42.75
46.50
55.12
1
1
1.5
1.5
2
2
3
3
4
4
5
5
5
5
7.5
7.5
7.5
7.5
7.5
9
9
11
11
13
11.5
14
17
22
26
31
33
35
39
43
47
51
55
57
61
65
70
76
82
80
83
94
-
11.625
14.125
17.125
22.125
26.125
31.125
33.125
35.125
39.125
43.125
47.25
51.375
55.375
57.5
61.5
65.5
70.630
76.625
82.625
-
6.5
8.25
10.75
14
16.5
20
22
23.75
27
29.25
32
34.25
37
40
42.25
44.5
47.00
49
51.75
52
55.25
62.75
-
2.06
3.13
4.06
6
8
10
12
13.25
15.25
17.25
19.25
21.25
23.25
25
27
29
30.75
32.75
34.5
38.5
41.25
42.75
46.5
55.12
11.0*
12.5*
14.0*
18.0*
21.5*
23.5*
26.5*
28.5*
30.5*
33.5*
35.5*
38.5*
42.0*
44.5*
47.0*
49.0*
52.0*
54.5*
56.5*
65.0*
66.5*
70.5*
76.0*
93.7*
3.94
5.12
5.94
7.91
10
12.12
14.5
14.64
17.84
19.25
22.11
23.63
25.05
26.49
30.87
32.53
34.25
35.19
36.8
42.02
43.66
46.95
51.18
59.10
5
6.75
8.5
11.25
15.5
18.5
22.36
24
26.32
29.2
32.27
36
38.76
41.75
44.86
47.9
52.25
53.64
56.83
65
68.6
71.00
77.33
91.70
24
36
48
-
12
18
24
18
24
18
24
24
24
30
36
30
30
42
42
42
42
42
-
6.34
7.44
8.43
10.43
12.55
14.54
20.14
21.16
24.78
26.19
30
31.53
32.95
34.34
40.99
42.65
44.50
45.31
46.92
55.425
57.06
-
60
85
165
360
650
1000
1510
1910
2400
2955
4100
5400
6550
7800
9500
12000
13999
16025
19100
26770
30500
-
45
75
100
225
450
650
1100
1230
1770
2200
3000
3950
4750
5600
6700
9120
10494
12300
15500
23000
25500
-
52
80
103
152
203
254
305
337
387
438
489
540
591
635
686
737
781
832
876
978
1048
1086
1181
1400
25
25
38
38
51
51
76
76
102
102
127
127
127
127
191
191
191
191
191
229
229
279
279
330
292
356
432
559
660
787
838
889
991
1092
1194
1295
1397
1448
1549
1651
1778
1930
2083
2032
2108
2388
-
295
359
435
562
664
791
841
892
994
1095
1200
1305
1407
1461
1562
1664
1794
1946
2099
-
165
210
273
356
419
508
559
603
686
743
813
870
940
1016
1073
1130
1193.8
1245
1314
1321
1403
1594
-
52
80
103
152
203
254
304
337
387
438
489
540
591
635
686
737
781
832
876
978
1048
1086
1181
1400
279*
318*
356*
457*
546*
597*
673*
724*
775*
851*
902*
978*
1067*
1130*
1194*
1245*
1321*
1384*
1435*
1651*
1689*
1791*
1930*
2381*
100
130
151
201
254
308
368
372
453
489
562
600
636
673
784
826
870
894
935
1067
1109
1192
1300
1501
127
171
216
286
394
470
568
610
669
742
820
914
985
1060
1139
1217
1327
1362
1443
1651
1742
1803
1964
2328
610
914
1219
-
305
457
610
457
610
457
610
610
610
762
914
762
762
1067
1067
1067
1067
1067
-
161
189
214
265
319
369
512
537
629
665
762
801
837
872
1041
1083
1130
1151
1192
1408
1449
-
27
39
75
163
295
454
685
866
1089
1340
1860
2449
2971
3538
4309
5443
6350
7269
8664
12143
13835
-
Dia.
SIZE mm
50
80
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
1000
1050
1100
1200
1400
kg
n Length (A) of a weld x flanged end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.
l Dimensions of 22 in. (550 mm) flanges are per MSS-SP-44 and 26 in. (650 mm) through 42 in. (1050 mm) flanges are per ASME B16.47 series A.
20 CAMERON
BRP-CAM-FWBV-01
11/11-SWP-3M
20
34
45
102
204
295
499
558
803
998
1361
1792
2155
2540
3039
4137
4760
5579
7031
10433
11567
-
D1 D2
Dimensions
SIZE in.
Nom
Dia.
Ball
Bore
B
Stem
Size
3
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
42
44
56
2.06
3.13
4.06
6.00
8.00
10.00
12.00
13.25
15.25
17.25
19.25
21.25
23.25
25.00
27.00
29.00
29.00
32.75
34.50
38.50
46.50
1
1
1.5
1.5
2
2
3
3
4
4
5
5
5
5
7.5
7.5
7.5
7.5
7.5
9
11
Flanged End n
RF
RTJ
Dia.
Length Length
A
A
D11l
14
17
22
26
31
33
35
39
43
47
51
55
57
61
65
70.00
76.00
82
83
-
14.125
17.125
22.125
26.125
31.125
33.125
35.125
39.125
43.125
47.25
51.375
55.375
57.5
61.5
65.5
70.630
76.625
82.625
-
8.25
10.75
14
16.5
20
22
23.75
27
29.25
32
34.25
37
40
42.25
44.5
47.00
49.00
51.75
55.25
-
Dia.
Weld
C.L.
Diameter
C.L. to
Body
Lever
End n
to
Handwheel Handwheel
Sphere Length
Length Bottom
for Gear
C.L.
Approximate
Valve Weight
lb.
D2
Flange
Weld
3.13
4.06
6
8
10
12
13.25
15.25
17.25
19.25
21.25
23.25
25
27
29
30.75
32.75
34.5
41.25
42.75
55.10
11.0*
12.5*
14.0*
18.0*
21.5*
23.5*
26.5*
28.5*
30.5*
33.5*
35.5*
38.5*
42.0*
44.5*
47.0*
49.0*
49.0*
54.5*
56.5*
65.0*
76.0*
3.94
5.12
5.94
7.91
10
12.12
14.5
14.64
17.84
19.25
22.11
23.63
25.05
26.49
30.87
32.53
32.53
35.19
36.8
42.02
51.18
5
6.75
8.5
11.25
15.5
18.5
22.36
24
26.32
29.2
32.27
36
38.76
41.75
44.86
47.90
47.90
53.64
56.83
65.00
77.32
24
36
48
-
12
18
24
18
24
18
24
24
24
30
36
30
30
30
42
42
-
6.34
7.44
8.43
10.43
12.55
14.54
20.14
21.16
24.78
26.19
30
31.53
32.95
34.34
40.99
42.65
42.65
45.31
46.92
-
80
150
250
470
850
1150
1640
2225
2600
3500
4450
5750
7000
8600
10100
12800
15200
17600
-
50
87
150
290
525
840
1160
1330
1920
2650
3300
4300
5100
6300
7800
9350
11200
13000
-
SIZE mm
kg
80
52
25
356
359
210
80
279*
100
127
610
161
36
100
80
25
432
435
273
103
318*
130
171
914
189
68
150
103
38
559
562
356
152
356*
151
216
1219
214
113
200
152
38
660
664
419
203
457*
201
286
305
265
213
250
203
51
787
791
508
254
546*
254
394
457
319
386
300
254
51
838
841
559
305
597*
308
470
610
369
522
350
305
76
889
892
603
337
673*
368
568
457
512
744
400
337
76
991
994
686
387
724*
372
610
610
537
1009
450
387
102
1092
1095
743
438
775*
453
669
457
629
1179
500
438
102
1194
1200
813
489
851*
489
742
610
665
1588
550
489
127
1295
1305
870
540
902*
562
820
610
762
2018
600
540
127
1397
1407
940
591
978*
600
914
610
801
2608
650
591
127
1448
1461
1016
635
1067*
636
985
762
837
3175
700
635
127
1549
1562
1073
686
1130*
673
1060
914
872
3901
750
686
191
1651
1664
1130
737
1194*
784
1139
762
1041
4581
800
737
191
1778
1794
1194
781
1245*
826
1217
762
1083
5800
850
737
191
1930
1946
1245
832
1245*
826
1217
762
1083
6900
900
832
191
2083
2099
1314
876
1384*
894
1362
1067
1151
7983
1100
978
229
1086
1651*
1067
1651
1400
1181
279
1400
1930*
1300
1964
n Length (A) of a weld x flanged end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.
l
Dimensions of 22 in. (550 mm) flanges are per MSS-SP-44 and 26 in. (650 mm) through 42 in. (1050 mm) flanges are per ASME B16.47 series A.
Note: Venturi opening or other reduced bore valves are available upon request.
BRP-CAM-FWBV-01
11/11-SWP-3M
23
39
68
132
238
381
526
603
871
1202
1497
1950
2313
2858
3538
4250
5100
5897
-
CAMERON 21
H
G
D1
D2
Dimensions
SIZE in.
Nom
Dia.
2
3
4
6
8
10
12
14
16
18
20
24
30
36
Ball
Bore
B
Stem
Size
Flanged End n
RF
RTJ
Dia.
Length Length
A
A
D1l
9.50
11.50
15.00
18.50
21.50
24.00
25.25
27.75
31.00
33.75
41.00
48.50
57.50
Dia.
Weld
C.L.
Diameter
C.L. to
Body
Lever
End n
to
Handwheel Handwheel
Sphere Length
Length Bottom
for Gear
C.L.
Approximate
Valve Weight
lb.
D2
Flange
Weld
3.13
4.06
6.00
8.00
10.00
12.00
12.75
14.75
16.75
18.625
22.50
29.00
34.50
13.5*
15.0*
20.0*
23.5*
25.5*
29.5*
31.5*
33.5*
36.5*
38.5*
45.0*
52.0*
59.5*
4.88
6.77
8.39
10.00
12.88
14.50
17.40
19.02
20.62
24.22
28.07
32.53
38.64
7.00
9.25
12.50
15.50
18.50
22.36
24.50
27.25
30.07
33.88
39.95
49.88
58.25
36
-
12
18
24
18
24
24
24
24
24
30
42
-
7.44
9.76
10.86
12.55
18.49
20.14
25.30
26.92
28.51
35.23
38.18
42.65
52.03
140
250
525
1210
1325
2250
3250
4000
5300
7100
10500
17500
25600
120
190
410
590
1010
1350
2155
2450
3950
5250
6450
11500
17500
SIZE mm
kg
50
52
Use 1500 Class Valves (PN 250)
30
80
38
381
384
241
80
343*
124
178
914
189
64
100
103
51
457
460
292
103
381*
172
235
305
248
113
150
152
51
610
613
381
152
508*
213
318
457
276
238
200
203
51
737
740
410
203
597*
254
394
610
319
549
250
254
76
838
841
546
254
648*
327
470
457
470
601
300
305
76
965
968
610
305
749*
368
568
610
512
1021
350
324
127
1029
1038
641
324
800*
442
622
610
643
1474
400
375
127
1130
1140
705
375
851*
483
692
610
684
1814
450
425
127
1219
1232
787
425
927*
524
764
610
724
2404
500
473
191
1321
1334
857
473
978*
615
861
610
895
3221
600
572
191
1549
1568
1041
572
1143*
713
1015
762
970
4763
750
737
191
1905
1927
1232
737
1321*
826
1267
1067
1083
7938
900
876
229
2286
2315
1461
876
1511*
981
1480
1322
11612
n Length (A) of a weld x flanged end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.
l
Dimensions of 22 in. (550 mm) flanges are per MSS-SP-44 and 26 in. (650 mm) through 42 in. (1050 mm) flanges are per ASME B16.47 series A.
22 CAMERON
BRP-CAM-FWBV-01
11/11-SWP-3M
54
86
186
268
458
612
977
1111
1792
2381
2926
5216
7938
H
G
D1
D2
Dimensions
SIZE in.
Flanged End n
RF
RTJ
Weld
C.L.
Diameter
C.L. to
Body
Lever
to
Handwheel Handwheel
End n
Sphere Length
Length Bottom
for Gear
C.L.
Approximate
Valve Weight
lb.
Nom
Ball
Bore
Stem
Dia.
Size
D1l
D2
Flange
2.06
1.0
15.0
15.125
9.50
3.13
11.0*
3.94
5.00
24
6.34
120
70
3.13
1.5
18.0
18.125
11.50
4.06
13.5*
4.88
7.00
36
7.44
190
150
Length Length
Dia.
Dia.
Weld
4.06
2.0
24.0
24.125
15.00
6.00
15.0*
6.77
9.25
12
9.76
400
260
6.00
2.0
29.0
29.125
18.50
8.00
20.0*
8.39
12.50
18
10.86
850
650
10
8.00
2.0
33.0
33.125
21.50
10.00
23.5*
10.00
15.50
24
12.55
1290
725
12
10.00
3.0
38.0
38.125
24.00
12.00
25.5*
12.88
18.50
18
18.49
1700
1110
14
12.00
3.0
40.5
40.875
25.25
12.75
29.5*
14.50
22.36
24
20.14
2750
1680
16
12.75
5.0
44.5
44.875
27.75
14.75
31.5*
17.40
24.50
24
25.30
3650
2300
80
52
25
381
384
241
80
279*
100
127
610
161
54
32
100
80
38
457
460
292
103
343*
124
178
914
189
86
68
SIZE mm
kg
150
103
51
610
613
381
152
381*
172
235
305
248
181
118
200
152
51
737
740
470
203
508*
213
318
457
276
386
295
250
203
51
838
841
546
254
597*
254
394
610
319
585
329
300
254
76
965
968
610
305
648*
327
470
457
470
771
503
350
305
76
1029
1038
641
324
749*
368
568
610
512
1247
762
400
324
127
1130
1140
705
375
800*
442
622
610
643
1656
1043
n Length (A) of a weld x flanged end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.
l
Dimensions of 22 in. (550 mm) flanges are per MSS-SP-44 and 26 in. (650 mm) through 42 in. (1050 mm) flanges are per ASME B16.47 series A.
Note: Venturi opening or other reduced bore valves are available upon request.
BRP-CAM-FWBV-01
11/11-SWP-3M
CAMERON 23
H
G
D1
D2
Dimensions
SIZE in.
Flanged End n
RF
RTJ
Dia.
Length Length
A
A
D1
Weld
C.L.
Diameter
C.L. to
Body
Lever
to
Handwheel Handwheel
End n
Sphere Length
Length Bottom
for Gear
C.L.
Approximate
Valve Weight
lb.
Nom
Dia.
Ball
Bore
B
Stem
Size
D2
Flange
Weld
2
3
4
6
8
10
12
14
16
18
20
24
2.06
3.13
4.06
6.00
8.00
10.00
12.00
12.75
14.75
16.75
18.625
22.50
1.0
1.5
2.0
2.0
3.0
4.0
4.0
5.0
5.0
7.5
7.5
7.5
14.50
18.50
21.50
27.75
32.75
39.00
44.50
49.50
54.50
60.50
65.50
76.50
14.625
18.625
21.625
28.000
33.125
39.375
45.125
50.250
55.375
61.375
66.375
77.625
8.50
10.50
12.25
15.50
19.00
23.00
26.50
29.50
32.50
36.00
38.75
46.00
2.06
3.13
4.06
6.00
8.00
10.00
12.00
12.75
14.75
16.75
18.625
22.50
11.0*
13.5*
15.0*
20.0*
23.5*
25.5*
29.5*
31.5*
33.5*
36.5*
38.5*
45.0*
3.94
4.88
6.77
8.39
10.95
15.15
17.31
17.40
19.02
22.69
24.22
28.07
5.00
7.00
9.25
12.50
16.38
19.50
23.38
26.00
29.25
31.57
34.72
42.16
36
-
12
12
18
18
18
24
24
30
30
30
48
6.34
7.44
9.76
10.86
16.89
19.96
21.80
25.30
26.92
33.71
35.23
38.18
100
180
300
715
1550
2000
3250
4200
5400
6350
9260
16250
45
120
190
410
1075
1575
1825
2550
2950
5125
6025
9400
52
80
103
152
203
254
305
324
375
425
473
572
25
38
51
51
76
102
102
127
127
191
191
191
368
470
546
705
832
991
1130
1257
1384
1537
1664
1943
371
473
549
711
841
1000
1146
1276
1407
1559
1686
1972
216
267
311
394
483
584
673
749
826
914
984
1168
52
80
103
152
203
254
305
324
375
425
473
572
279*
343*
381*
508*
597*
648*
749*
800*
851*
927*
978*
1143*
100
124
172
213
278
385
440
442
483
576
615
713
127
178
235
318
416
495
594
660
743
802
882
1071
914
-
305
305
457
457
457
610
610
762
762
762
1219
161
189
248
276
429
507
554
643
684
856
895
970
45
82
136
324
703
907
1474
1905
2449
2880
4200
7371
Dia.
SIZE mm
50
80
100
150
200
250
300
350
400
450
500
600
kg
n Length (A) of a weld x flanged end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.
24 CAMERON
BRP-CAM-FWBV-01
11/11-SWP-3M
20
54
86
186
488
714
828
1157
1338
2325
2733
4264
H
G
D1
D2
Dimensions
SIZE in.
Flanged End n
RF
RTJ
Weld
C.L.
Diameter
C.L. to
Body
Lever
to
Handwheel Handwheel
End n
Sphere Length
Length Bottom
for Gear
C.L.
Approximate
Valve Weight
lb.
Ball
Bore
Stem
Dia.
Size
D1
D2
Flange
2.06
1.0
18.50
18.625
10.50
3.13
11.0*
3.94
5.00
36
6.34
150
70
3.13
1.5
21.50
21.625
12.25
4.06
13.5*
4.88
7.00
12
7.44
240
150
Nom
Length Length
Dia.
Dia.
Weld
4.06
2.0
27.75
28.000
15.50
6.00
15.0*
6.77
9.25
12
9.76
550
260
6.00
2.0
32.75
33.125
19.00
8.00
20.0*
8.39
12.50
18
10.86
1025
650
10
8.00
3.0
39.00
39..375
23.00
10.00
23.5*
10.95
16.38
18
16.89
1725
1200
12
10.00
4.0
44.50
45.125
26.50
12.00
25.5*
15.15
19.50
18
19.96
2810
1650
14
12.00
4.0
49.50
50.250
29.50
12.75
29.5*
17.31
23.38
24
21.80
3750
2100
16
12.75
5.0
54.50
55.375
32.50
14.75
31.5*
17.40
26.00
24
25.30
5150
2725
80
52
25
470
473
267
80
279*
100
127
914
161
68
32
100
90
38
546
549
311
103
343*
124
178
305
189
109
68
SIZE mm
kg
150
103
51
705
711
394
152
381*
172
235
305
248
249
118
200
152
51
832
841
483
203
508*
213
318
457
276
465
295
250
203
76
991
1000
584
254
597*
278
416
457
429
782
544
300
254
102
1130
1146
673
305
648*
385
495
457
507
1275
748
350
305
102
1257
1276
749
324
749*
440
594
610
554
1701
953
400
324
127
1384
1407
826
375
800*
442
660
610
643
2336
1236
n Length (A) of a weld x flanged end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.
Note: Venturi opening or other reduced bore valves are available upon request.
BRP-CAM-FWBV-01
11/11-SWP-3M
CAMERON 25
H
G
D1
D2
Dimensions
SIZE in.
Ball
Bore
Nom
Stem
Dia.
Size
D1
D2
Flange
Weld
1.0
1.5
2.0
3.0
4.0
4.0
5.0
17.75
22.75
26.50
36.00
40.50
50.00
56.00
17.875
23.000
26.875
36.500
40.875
50.875
56.875
9.25
12.00
14.00
19.00
21.75
26.50
30.00
2.06
3.13
4.06
6.00
7.125
8.875
10.50
15*
18*
20*
24*
28*
33*
36*
4.53
5.67
7.24
9.76
12.84
14.84
16.65
5.43
7.50
9.75
13.50
18.11
20.87
24.50
48
-
12
18
24
24
24
30
7.25
8.94
11.70
13.13
17.88
20.00
24.75
114
236
471
943
2094
2922
4506
94
187
382
737
1676
2166
3258
1.0
1.5
2.0
3.0
4.0
4.0
22.75
26.50
36.00
40.50
50.00
56.00
23.000
26.875
36.500
40.875
50.875
56.875
12.00
14.00
19.00
21.75
26.50
30.00
3.13
4.06
6.00
7.125
8.875
10.50
15*
18*
20*
24*
28*
33*
4.53
5.67
7.24
9.76
12.84
14.875
5.43
7.50
9.75
13.50
18.11
20.87
48
-
12
18
24
24
24
7.25
8.94
11.70
13.13
17.88
20.00
156
286
638
1297
2518
3566
129
247
513
1017
1916
2657
Flanged End n
RF
RTJ
Dia.
Length Length
Dia.
Weld
C.L.
Diameter
C.L. to
Body
Lever
to
Handwheel Handwheel
End n
Sphere Length
Length Bottom
for Gear
C.L.
Approximate
Valve Weight
lb.
FULL OPENING
2
3
4
6
8
10
12
2.06
3.13
4.06
6.00
7.125
8.875
10.50
Reduced Opening
3
4
6
8
10
12
2.06
3.13
4.06
6.00
7.13
8.875
SIZE mm
FULL OPENING
50
80
100
150
200
250
300
52
80
103
152
181
225
267
kg
25
38
51
76
102
102
127
451
578
673
914
1029
1270
1422
454
584
683
927
1038
1292
1445
235
305
356
483
552.5
673
762
52
80
103
152
181
225
267
381*
457*
508*
610*
711*
838*
914*
115
144
184
248
326
378
423
138
191
248
343
460
530
622
1219
-
305
457
610
610
610
762
184
227
297
334
454
508
629
52
107
214
428
950
1325
2044
43
85
173
334
760
983
1478
25
38
51
76
102
102
578
673
914
1029
1270
1422
584
683
927
1038
1292
1445
305
356
483
553
673
762
80
103
152
181
225
267
381*
457*
508*
610*
711*
838*
115
144
184
248
326
377
138
191
248
343
460
530
1219
-
305
457
610
610
610
184
227
297
334
454
508
71
130
289
588
1142
1618
59
98
233
461
869
1205
Reduced Opening
80
100
150
200
250
300
42
80
103
152
181
225
n Length (A) of a weld x flanged end valve is one half the sum of length (A) of a weld end and a flange end of the same size and rating.
* Short pattern.
Note: Venturi opening or other reduced bore valves are available upon request.
26 CAMERON
BRP-CAM-FWBV-01
11/11-SWP-3M
H
G
D1
D2
Dimensions
SIZE in.
Ball
Nom
Bore
Stem
Dia.
B
Size
2000 psi W.P. 4000 psi TEST
2
3
4
7
2.06
3.13
4.06
6.00
1.0
1.0
1.5
2.0
Length
Length
Dia.
D1
D2
C.L.
to
Bottom
C
11.625
14.124
17.125
22.125
6.50
8.25
10.75
14.00
2.06
3.13
4.06
6.00
3.94
5.12
5.94
7.91
5.00
6.75
8.50
11.50
36
36
36
-
24
6.34
7.44
8.43
10.29
44
85
165
445
14.625
15.125
18.125
24.125
8.50
9.50
11.50
15.00
2.06
3.13
4.06
6.00
3.94
4.88
6.77
8.39
5.00
7.00
9.25
12.50
36
36
36
-
30
6.34
7.44
9.76
10.92
90
130
255
675
14.625
18.625
21.625
28.000
8.50
10.50
12.25
15.50
2.06
3.13
4.06
6.00
3.94
4.88
6.77
8.39
5.00
7.00
9.25
13.50
36
36
-
24
24
6.34
7.44
9.30
13.13
95
189
361
805
Body
Sphere
Lever
Length
Diameter
Handwheel
for Gear
2.06
3.13
4.06
6.00
1.0
1.5
2.0
2.0
2.06
3.13
4.06
6.00
2.0
1.5
2.0
3.0
SIZE mm
140.6 kg/cm2 W.P. 281.2 kg/cm2 TEST
50
80
100
180
52.3
79.5
103.1
152.4
25.4
25.4
38.1
50.8
295
359
435
562
kg
165
210
274
356
52
80
103
152
100
130
151
201
127
171
216
292
914
914
914
-
610
161
189
214
261
20
39
75
202
216
241
292
381
52
80
103
152
100
124
172
213
127
178
235
318
914
914
914
-
762
161
189
248
277
41
59
116
306
216
267
311
394
52
80
103
152
100
124
172
213
127
178
235
343
914
914
914
-
610
161
189
236
334
43
86
164
365
52.3
79.5
103.1
152.4
25.4
38.1
50.8
50.8
371
384
460
613
52.3
79.5
103.1
152.4
25.4
38.1
50.8
76.2
371
473
549
711
BRP-CAM-FWBV-01
11/11-SWP-3M
CAMERON 27
H
G
D1
D2
Dimensions
SIZE in.
Ball
Nom
Bore
Stem
Dia.
B
Size
2000 psi W.P. 4000 psi TEST
3.13
4.06
7.06
2.06
3.13
4.06
1.0
1.0
1.5
Length
Length
Dia.
D1
D2
C.L.
to
Bottom
C
14.125
17.125
22.125
8.25
10.75
14.00
3.13
4.06
6.00
3.94
5.12
5.94
5.00
6.75
8.50
36
36
36
6.34
7.44
8.43
80
140
230
15.125
18.125
24.125
9.50
11.50
15.00
3.13
4.06
6.00
3.94
4.88
6.77
5.00
7.00
9.25
36
36
36
6.34
7.44
9.76
105
197
345
18.625
21.625
28.000
10.50
12.25
15.50
3.13
4.06
6.00
3.94
4.88
6.77
5.00
7.00
9.25
36
36
-
24
6.34
7.44
9.30
130
230
490
Body
Sphere
Lever
Length
Diameter
Handwheel
for Gear
2.06
3.13
4.06
1.0
1.5
2.0
2.06
3.13
4.06
1.0
1.5
2.0
SIZE mm
140.6 kg/cm2 W.P. 281.2 kg/cm2 TEST
79.5
103.1
179.3
52.3
79.5
103.1
25.4
25.4
38.1
359
435
562
kg
210
273
356
80
103
152
100
130
151
127
171
216
914
914
914
161
189
214
36
64
104
241
292
381
80
103
152
100
124
172
127
178
235
914
914
914
161
189
248
48
89
156
267
311
394
80
103
152
100
124
172
127
178
235
914
914
-
610
161
189
236
59
104
222
52.3
79.5
103.1
25.4
38.1
50.8
384
460
613
52.3
79.5
103.1
28 CAMERON
25.4
38.1
50.8
473
549
711
BRP-CAM-FWBV-01
11/11-SWP-3M
(mm)
150
300
400
600
900
1500
2500
(PN 20)
(PN 50)
(PN 64)
(PN 100)
(PN 150)
(PN 250)
(PN 420)
(50)
4.06 (103)
4.06 (103)
4.06 (103)
4.06 (103)
4.06 (103)
4.06 (103)
4.68 (119)
(80)
5.08 (129)
5.08 (129)
5.08 (129)
5.08 (129)
4.76 (121)
4.76 (121)
5.71 (145)
(100)
5.79 (147)
5.79 (147)
5.79 (147)
5.79 (147)
6.61 (168)
6.61 (168)
6.89 (175)
(150)
7.64 (194)
7.64 (194)
7.64 (194)
7.64 (194)
8.23 (209)
8.23 (209)
12.52 (318)
(200)
9.92 (252)
9.92 (252)
9.92 (252)
9.92 (252)
9.92 (252)
13.45 (342)
15.39 (391)
10
(250)
11.91 (303)
11.91 (303)
11.91 (303)
11.91 (303)
15.05 (382)
15.96 (405)
18.07 (459)
19.61 (498)
12
(300)
16.70 (424)
16.70 (424)
16.70 (424)
16.70 (424)
16.70 (424)
17.80 (452)
14
(350)
17.72 (450)
17.72 (450)
17.72 (450)
17.72 (450)
20.55 (522)
20.55 (522)
16
(400)
19.08 (485)
19.08 (485)
20.78 (528)
20.78 (528)
22.17 (563)
22.17 (563)
18
(450)
22.19 (564)
22.19 (564)
22.19 (564)
22.19 (564)
23.76 (604)
27.71 (704)
20
(500)
23.75 (603)
23.75 (603)
25.25 (641)
25.25 (641)
29.23 (742)
29.23 (742)
22
(550)
25.22 (641)
25.22 (641)
26.78 (680)
26.78 (680)
24
(600)
26.63 (676)
26.63 (676)
28.20 (716)
28.20 (716)
32.18 (817)
32.18 (817)
26
(650)
29.59 (752)
29.59 (752)
29.59 (752)
29.59 (752)
28
(700)
30.97 (787)
30.97 (787)
30.97 (787)
34.99 (889)
30
(750)
32.62 (829)
32.62 (829)
32.62 (829)
36.65 (931)
36.65 (931)
34
(850)
35.26 (896)
35.26 (896)
39.31 (998)
39.31 (998)
36
(900)
36.85 (936)
40.92 (1039)
40.92 (1039)
40.92 (1039)
44.65 (1134)
40
(1000)
44.25 (1124)
44.25 (1124)
44.25 (1124)
48.05 (1220)
42
(1050)
45.89 (1166)
45.89 (1166)
45.89 (1166)
49.69 (1262)
48
(1200)
50.04 (1271)
50.04 (1271)
54.02 (1372)
56.50 (1435)
The dimensions on this page, combined with the top works dimensions on the following two pages, provide the information
required for determining the overall dimensions of a Cameron Fully Welded Ball Valve when an actuator is installed.
For additional dimensional information on Cameron Fully Welded Ball Valves, contact your
Camerons Valves & Measurement group representative.
BRP-CAM-FWBV-01
11/11-SWP-3M
CAMERON 29
Mounting Dimensions
DASH NUMBER
Valve Stem Size in.
-1
-2
-3
1.00
1.50
2.00
Flange Dia.
6.50
6.50
8.75
Boss Dia.
4.747
4.747
6.997
Height of Nut
1.94
2.12
2.62
Bolt Size
0.44
0.54
0.66
1.50
2.00
2.50
16
5.75
5.75
8.00
Width of Nut
Number of Holes
Boss Height
0.328
0.328
0.328
3/8-16 NC-2
3/8-16 NC-2
3/8-16 NC-2
30
30
30
DASH NUMBER
-1
-2
-3
25.40
38.10
50.80
Flange Dia.
165.10
165.10
222.25
Boss Dia.
120.57
120.57
177.72
Height of Nut
49.28
53.85
66.55
Bolt Size
11.18
13.72
16.76
Width of Nut
38.10
50.8
63.50
Number of Holes
16
146.05
146.05
203.20
8.33
8.33
8.33
3/8-16 NC-2
3/8-16 NC-2
3/8-16 NC-2
40.68
40.68
40.68
Boss Height
30 CAMERON
BRP-CAM-FWBV-01
11/11-SWP-3M
R
Q
J
W N
V
H
K
Mounting Dimensions
DASH NUMBER
Valve Stem Size in.
A
Number of Holes
-4
3.00
-5
4.00
-6
5.00
-7
7.50
-8
9.00
-9
11.00
-10
13.00
-11
15.00
16
16
24
24
24
28
28
32
10.375
17.25
18.375
24.00
31.00
27.50
27.50
36.00
2.745
3.245
4.495
5.495
6.245
8.995
8.995
Boss Dia.
9.122
16.246
17.121
21.746
28.308
25.496
25.496
33.496
Key Seat
2.402
2.831
3.786
4.803
5.409
7.887
6.774
Height of Nut
4.75
5.310
6.25
8.50
9.13
13.31
13.31
19.25
39.00
Flange Dia.
11.50
18.25
19.380
25.75
32.75
30.00
30.00
Flange Thickness
0.63
0.63
0.63
1.00
1.00
1.25
1.25
1.50
Key Width
0.625
0.75
1.25
1.25
1.50
2.00
2.00
2.25
Key Length
3.75
4.310
5.250
7.50
8.13
12.00
12.00
17.50
Overall Height
6.120
7.00
8.120
11.00
11.75
16.12
15.84
21.50
1.00
1.00
1.00
1.00
1.00
1.25
1.25
1.50
Boss Height
0.328
0.328
0.328
0.328
0.328
0.328
0.328
0.328
1/2-13 NC-2
1/2-13 NC-2
1/2-13 NC-2
7/8-9 NC-2
7/8-9 NC-2
1 1/4-8 NC-2
1 1/4-8 NC-2
1 1/4-8 NC-2
60
60
63
330
330
1000
1000
1600
-4
76.20
-5
101.60
-6
127.00
-7
190.50
-8
228.60
-9
279.40
-10
330.20
-11
381.00
DASH NUMBER
Valve Stem Size mm
A
Number of Holes
16
16
24
24
24
28
28
32
263.53
438.15
466.73
609.60
787.40
698.50
698.50
914.40
69.73
82.43
114.18
139.58
158.63
228.48
228.48
Boss Dia.
231.69
412.64
434.87
552.34
719.02
647.59
647.59
850.79
Key Seat
61.01
71.91
96.16
122.00
137.38
200.32
172.05
Height of Nut
120.65
134.88
158.75
215.90
231.91
338.03
338.03
488.95
990.60
Flange Dia.
292.10
463.55
492.26
654.05
831.85
762.00
763.00
Flange Thickness
16.00
16.00
16.00
25.40
25.40
31.75
31.75
38.10
Key Width
15.88
19.05
31.75
31.75
38.10
50.80
50.80
57.15
Key Length
95.25
109.48
133.35
190.50
206.51
304.80
304.80
444.50
Overall Height
155.45
177.80
206.25
279.40
298.45
409.45
402.34
546.10
25.40
25.40
25.40
25.40
25.40
31.75
31.75
38.10
Boss Height
8.33
8.33
8.33
8.33
8.33
8.33
8.33
8.33
1/2-13 NC-2
1/2-13 NC-2
1/2-13 NC-2
7/8-9 NC-2
7/8-9 NC-2
1 1/4-8 NC-2
1 1/4-8 NC-2
1 1/4-8 NC-2
81
81
85
447
447
1356
1356
2169
CAMERON 31
Stem Size
Weight
in.
(mm)
Model
Effective
Ratio
Number of
Turns Per 90
lb.
(kg)
1.0
(25.4)
DT21
22.5:1
15
3.56 (90)
3.54 (90)
1.63 (41)
3.63 (92)
36
(16)
1.5
(38.1)
DT21
22.5:1
15
3.56 (90)
3.54 (90)
1.63 (41)
3.63 (92)
36
(16)
2.0
(50.8)
DT40
27.6:1
19.75
5.68 (144)
4.83 (123)
2.25 (57)
4.63 (118)
75
(34)
3.0
(76.2)
DT54
91.2:1
79.5
5.66 (144)
6.83 (173)
4.94 (125)
4.30 (109)
108
(49)
Cameron
Q
Stem Size
in.
(mm)
Model
Effective
Ratio
3.0
(76.2)
WG1/B6
55:1
60
Weight
Number of
Turns Per 90
lb.
(kg)
5.75 (146)
7.56 (192)
4.11 (104)
12.64 (321)
127
(58)
4.0
(101.6)
WG1/B6
110:1
112.5
9.13 (232)
8.69 (221)
4.69 (119)
12.64 (321)
211
(96)
5.0
(127.0)
WG1/S12
153:1
190
9.69 (246)
10.25 (260)
5.50 (140)
9.50 (241)
364
(165)
7.5
(190.5)
WG1/S12
297:1
297
12.88 (327)
12.63 (321)
6.63 (168)
14.00 (356)
581
(264)
9.0
(228.6)
WG1/S12
432:1
428
16.37 (416)
14.77 (375)
7.39 (188)
19.50 (495)
793
(360)
32 CAMERON
BRP-CAM-FWBV-01
11/11-SWP-3M
Aftermarket Services
other valves
Remanufactured Products
BRP-CAM-FWBV-01
11/11-SWP-3M
CAMERON 33
TRADEMARK INFORMATION
Cameron is a registered trademark which is owned by Cameron.
This document contains references to registered trademarks or product designations,
which are not owned by Cameron.
Trademark Owner
CELCON
DELRIN
FLUOREL
HYDRIN
MONEL
NORDEL
STELLITE
TEFLON
VITON
34 CAMERON
BRP-CAM-FWBV-01
11/11-SWP-3M
BRP-CAM-FWBV-01
11/11-SWP-3M
CAMERON 35