Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Garlock
R U B B E R T E C H N O L O G I E S
Garlock Rubber Technologies offers the most extensive line of sheet rubber in the industry. Our top quality products are made with pride at our state-of-the-art facility in Paragould, Arkansas. The Garlock Rubber Technologies success is founded on experience, innovation, state-of-the-art technology and dedication to quality. For nearly 120 years, weve been a leader in the rubber industry with many technical firsts. First to use the alkali reclaim process which cures rubber more efficiently and makes it easier to handle. First to develop and patent the Rotocure Vulcanization Process, for uniform continuous process curing. First to use the Bierer-Davis Oxygen Bomb to accelerate rubber aging tests. Garlock Rubber Technologies also maintains one of the industrys most advanced technical labs, where we test the physical, chemical and component properties of materials and finished products. Our computer-controlled manufacturing equipment ensures the tightest possible gauge tolerances and highest quality control. That technology, combined with extensive employee training and experience, means our quality is guaranteed.
Our experienced engineering and field support staff are available to help you decide which products are best for your job requirements. And we have a wide range of made-to-order capabilities so we can customize a product to meet your special needs. Call Garlock Rubber Technologies for unsurpassed quality and service, including: Everything in rubber sheeting including SBR, natural, nitrile, neoprene, EPDM, butyl, CPE, VITON and HYPALON. Available in custommade colors and finishes with or without fiber reinforcement. Complete line of slit-to-width skirtboard and chute lining and protecting products for the construction, aggregate and conveyor belting markets. Complete line of cushioning products for the road and bridge construction, building construction and vibration isolation markets. Gauge thicknesses from 1/32" to 3" (0.8 mm to 76.2 mm) 1/32" to 1/4" (0.8 mm to 6.4 mm) thicknesses available up to 84" (2134 mm) in width. 1/4" to 1/2" (6.4 mm to 12.7 mm) thicknesses available up to 72" (1828 mm) in width. 1/2" to 3" (12.7 mm to 76.2 mm) thicknesses available up to 48" (1219 mm) in width. Heavy gauge over 3/8" (9.5 mm) available up to 50' (15.24 m) lengths.
VITON and HYPALON are registered trademarks of DuPont Dow Elastomers.
Garlock
Rubber Technologies
F
-112.0 -94.0 -76.0 -58.0 -40.0 -22.0 -13.0 -4.0 +5.0 14.0 23.0 32.0 33.8 35.6 37.4 39.2 41.0 42.8 44.6 46.4 48.2 50.0 51.8 53.6 55.4 57.2 59.0 60.8 62.6 64.4 66.2 68.0
C
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
F
69.8 71.6 73.4 75.2 77.0 78.8 80.6 82.4 84.2 86.0 87.8 89.6 91.4 93.2 95.0 96.8 98.6 100.4 102.2 104.0 105.8 107.6 109.4 111.2 113.0 114.8 116.6 118.4 120.2 122.0 123.8 125.6
C
53 54 55 56 57 58 59 60 61 65 70 75 80 85 90 95 100 110 120 130 140 150 160 170 180 190 200 210 212 220 230 240
F
127.4 129.2 131.0 132.8 134.6 136.4 138.2 140.0 141.8 149.0 158.0 167.0 176.0 185.0 194.0 203.0 212.0 230 248 266 284 302 320 338 356 374 392 410 413 428 446 464
C
250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400 410 420 430 440 450 460 470 480 490 500 510 520 530 540 550 560
F
482 500 518 536 554 572 590 608 626 644 662 680 698 716 734 752 770 788 806 824 842 860 878 896 914 932 950 968 986 1004 1022 1040
C
570 580 590 600 610 620 630 640 650 660 670 680 690 700 710 720 730 740 750 760 770 780 790 800 810 820 830 840 850 860 870 880
F
1058 1076 1094 1112 1130 1148 1166 1184 1202 1220 1238 1256 1274 1292 1310 1328 1346 1364 1382 1400 1418 1436 1454 1472 1490 1508 1526 1544 1562 1580 1598 1616
C
890 900 910 920 930 940 950 960 970 980 990 1000 1010 1020 1030 1040 1050 1060 1070 1080 1090 1100 1110 1120 1130 1140 1150 1160 1170 1180 1190 1200
F
1634 1652 1670 1688 1706 1724 1742 1760 1778 1796 1814 1832 1850 1868 1886 1904 1922 1940 1958 1976 1994 2012 2030 2048 2066 2084 2102 2120 2138 2156 2174 2192
C
1210 1220 1230 1240 1250 1260 1270 1280 1290 1300 1310 1320 1330 1340 1350 1360 1370 1380 1390 1400 1410 1420 1430 1440 1450 1460 1470 1480 1490 1500
F
2210 2228 2246 2264 2282 2300 2318 2336 2354 2372 2390 2408 2426 2444 2462 2480 2498 2516 2534 2552 2570 2588 2606 2624 2642 2660 2678 2696 2714 2732
Garlock
Rubber Technologies
CONTENTS
Product Selection Guide ......................................................... 2 Safety Information ................................................................... 4 Non-Oil-Resistant Sheet ......................................................... 5 Commercial Grade Neoprene Sheet ....................................... 6 Neoprene Oil- and Ozone-Resistant Sheet ............................. 7 Nitrile Oil-Resistant Sheet ....................................................... 8 Neoprene Diaphragm Sheet ................................................... 9 Food Grade Sheet ................................................................. 10 Cloth-Inserted Sheet ............................................................. 11 Chute Lining and Extruded Skirtboard .................................. 12 VIBLON Cushioning Pads ................................................. 13 Neoprene Bearing Pads ........................................................ 14 High Performance Sheet Rubber500 Series ....................... 15 Chemical Resistance Guidelines .......................................... 16 Chemical Resistance Charts ................................................. 17 Elastomers and Performance Characteristics ....................... 24 Non-Stock Items .................................................................... 26 Ordering and Service Information ......................................... 27 ANSI / ASTM Information ....................................................... 27 Metric Conversion Charts ...................................................... 28
Garlock
Rubber Technologies
Product
Bay State 22 Style #50 Style #60 Style #135 Style #145 Style #563 Style #564 Style #4160 Style #244 Style #254 Style #264 Style #274 Style #284 Style #1051 Branded Style #5240 Style #5250 Style #5260 Style #361 Style #363 Branded Style #5340 Style #5360 Diaphragm #3205, #3206, #3207, #3210
Elastomer
NAT/SBR NAT/SBR SBR Natural Natural EPDM EPDM Natural Blended CR/NBR/SBR Blended CR/NBR/SBR Blended CR/NBR/SBR Blended CR/NBR/SBR Blended CR/NBR/SBR Neoprene Neoprene Neoprene Neoprene Nitrile Nitrile Nitrile Nitrile Neoprene
Color
Red Red Black Tan Tan Black Black Red Black Black Black Black Black Black Black Black Black Black Black Black Black Black
Durometer* (Shore A)
70-85 70-85 70-85 35-45 40-50 55-65 55-65 55-65 35-45 45-55 55-65 65-75 75-85 55-65 35-45 45-55 55-65 55-65 55-65 35-45 55-65 65-75
ASTM Specifications
ASTM D-1330 Gr. I & II ASTM D-1330 Gr. II ASTM D-1330 Gr. II ASTM D2000-AA-430 ASTM D2000-AA-428-Z1 ASTM D2000-3BA-615-B13-C12 ASTM D2000-2BA-610-C12 ASTM D2000-2AA-612-A13 ASTM D2000-BC-408 ASTM D2000-BC-508 ASTM D2000-BC-608 ASTM D2000-BC-710 ASTM D2000-BC-810 ASTM D2000-BC-610-C12-Z1 ASTM D2000-5BC-413-A14-B14-E034 ASTM D2000-2BE-515-A14-B14-C12-E034-F17 ASTM D2000-2BE-615-A14-B14-C12-E014-F17-Z1 ASTM D2000-BF-618 ASTM D2000-BF-610 ASTM D2000-5BG-413-A14-B14-E034 ASTM D2000-5BG-615-A14-B14-E034 ASTM D2000-BC-714
Page No.
5 5 5 5, 12 5, 12 5 5 5,10 6 6 6 6 6 7 7 7 7 8 8 8 8 9
NOTE
The chart on page 2 and 3 lists the basic physical properties of each Garlock sheet rubber style, making it easier to match your specifications and requirements to a Garlock material. Refer to the pages listed in the last column for additional information.
Since each application is unique, when trying to match a sheet rubber to a specific application various criteria should be considered including the list on page 26 under Information Necessary for Custom Manufacturing. Further information regarding the use of Garlock sheet rubber is available by calling Garlock Customer Service at (800) 643-0134.
Garlock
Rubber Technologies
Product
Style #362 Multi-Ply Style #2102 Style #70 Style #2264 Style #2361 Style #2564 Super RINOHIDE RINOBACK Tan Gum Style #7164 Extruded Skirtboard VIBLON Bearing Pads
Elastomer
Nitrile SBR/NBR Polyester Fabric SBR/NBR Polyester Fabric SBR/NBR Polyester Fabric Blended SBR/CR/NBR Polyester Fabric Nitrile EPDM Fabric SBR SBR/ Cottonback Natural SBR SBR Nitrile Neoprene & Natural
Color
White Black Black Black Black Black Black Black Black Tan Black Black Tan Black
Durometer* (Shore A)
55-65 70-80 70-80 70-80 55-65 55-65 55-65 55-65 55-65 35-45 55-65 55-65 -45-55 55-65 65-75
ASTM Specifications
ASTM D2000-2BF-615-E034 ASTM D2000-BC-810-Z1 ASTM D2000-BC-810-Z1 ASTM D2000-BC-810-Z1 ASTM D2000-BC-608 ASTM D2000-BF-618 ASTM D2000-2BA-610-C12 ASTM D2000-BA-625 ASTM D2000-BA-625 ASTM D2000-AA-430 ASTM D2000-BA-620 ASTM D2000-BA-615 Designed to meet MIL-C-822E specifications Designed to meet AASHTO specifications
Page No.
10 11 11 11 11 11 11 12 12 12 12 12 13 14
Style #9518
Branded/Scented
15 15 15 15
* Figures are for rubber compound without fabric. VITON and HYPALON are registered trademarks of DuPont Dow Elastomers.
WARNING!
Exposure to chemicals, fuels, oils or heat can affect the performance of sheet rubber and cause the product to lose its ability to maintain a seal, causing leakage or other failure which could result in property damage, serious injury or death. Since each application is unique, consult Customer Service at (800) 643-0134 or fax (800) 325-0506 for further information.
Garlock
Rubber Technologies
SAFETY INFORMATION
READ THIS PAGE BEFORE USING ANY OF THE INFORMATION IN THIS CATALOG This catalog is intended as a guide to selecting the proper sheet rubber for the applications listed herein. It contains important cautions, warnings, guidelines and directions for the safe and proper use of Garlock sheet rubber. All these directions and footnotes should be read and understood before specifying or using any of these sheet rubber products. Symbols, boxes, boldface type, etc. are used to call attention to these instructions. Be sure to read and understand them before proceeding further with this information.
WARNING!
Certain sheet rubber applications are dangerous, such as those involving high temperatures, fuels and flammables, high pressures or chemical exposure. An in-service failure of sheet rubber can result in serious bodily injury or property damage. Do not use the sheet rubber products above the temperatures recommended by the manufacturer. All operators must be thoroughly trained to inspect for leakage and other signs of gasket wear. Failure or misapplication of a seal, gasket or sheet rubber could cause the release of a poisonous, corrosive or flammable material, resulting in serious bodily injury, such as burns to the skin, eyes or respiratory system through coming into contact with the escaping fluid vapor. Personnel located in areas close to systems containing these dangerous materials must be properly equipped with protective clothing, facial protection and emergency breathing equipment. SERVICE LIFE. The service life of sheet rubber will decrease as the application approaches the upper temperature limit. The service life of sheet rubber products in high temperature applications depends on the specific details of the application, including chemicals and/or oils in contact with the rubber.
CONSULT THE CHEMICAL RESISTANCE GUIDELINES BEGINNING ON PAGE 16 OF THIS CATALOG FOR VITON, CPE, AND BUTYL PRODUCTS. CALL GARLOCK AT (800) 643-0134 OR FAX (800) 325-0506 FOR ADDITIONAL APPLICATION GUIDELINES AND CHEMICAL COMPATIBILITY INFORMATION ON OTHER SHEET PRODUCTS.
Garlock
Rubber Technologies
NON-OIL-RESISTANT SHEET
Bay State 22 (Branded) has a smooth, rotocured finish. It is a blend of natural and SBR rubber, specially compounded to be quicksealing, non-hardening and heat resistant. It conforms easily to uneven flange surfaces. ASTM D-1330 Gr. I Style #50 is a cloth-finish, drumcured sheet. It is an excellent, lowcost, flange gasket material. ASTM D-1330 Gr. II Style #60 is a cloth-finish, drumcured sheet. It is an excellent, lowcost, flange gasket material. ASTM D-1330 Gr. II Style #135 is a full-floating, natural rubber. It resists most organic salts, ammonia, acids and alkalies. It is non-marking. ASTM D2000-AA-430 Style #145 is an economical natural rubber which can be used in the same applications as Style #135. ASTM D2000-AA-428-21 Style #563 is an EDPM sheet that provides outstanding resistance to weathering, ozone and UV exposure. It provides excellent chemical resistance and dynamic properties. ASTM D2000-3BA-615-B13-C12 Style #564 has the same general characteristics as Style #563, but it is a commercial quality sheet. ASTM D2000-2BA-610-C12 Style #4160 is a high-grade, natural rubber sheet primarily designed for squeegees for professional window cleaners. It also makes an excellent floor squeegee when oils are not present. Meets FDA requirements for food-grade gasket material. ASTM D2000-2AA-612-A13
Excellent general purpose gasket materials for air, hot and cold water, saturated steam and exterior service.
Typical Tensile Durometer psi [bar] (Shore A) (Minimum) 70-85 70-85 1,000 (700) [69 (48)] 800 (400) [55 (28)] 800 (400) [55 (28)] 3,400 (3,000) [235 (207)] 3,100 (2,800) [214 (193)] 1,700 (1,500) [117 (104)] 1,200 (1,000) [83 (69)] 1,400 (1,200) [97 (83)]
Approx. Wt Lbs/Yd2 [kg/m2] 1/16" [1.6mm] 4.7 [2.5] 5.0 [2.7] 5.0 [2.7] 2.9 [1.6] 3.2 [1.7] 3.3 [1.8] 3.6 [2.0] 4.8 [2.6]
Temperature Range -20F to +180F [-29C to +82C] -20F to +180F [-29C to +82C] -20F to +180F [-29C to +82C] -20F to +180F [-29C to +82C]
Pressure Maximum psig [bar] 1/8" [3.2mm] 250 [17] 150 [10]
Style #60
Black
70-85
150
up to 72 1/16,1/8, 1/4 [1829] [1.6, 3.2, 6.4] 36, 48 1/16 thru 1/4 [914, [1.6 thru 6.4] 1219] 36 1/16, 3/32, 1/8 [914] [1.6, 2.4, 3.2] 36, 48 [914, 1219] 36 [914] 36 [914] 36, 48 [914, 1219] 36 [914] 1/16 thru 1 [1.6 thru 25.4]
150 [10]
Style #135
Natural
Tan
35-45
600
250 [17]
1/16 thru 1 -20F to +180F [1.6 thru 25.4] [-29C to +82C] 1/16 thru 1/4 -40F to +275F [1.6 thru 6.4] [-40C to +135C] 1/16 thru 1/2 -20F to +250F [1.6 thru 12.7] [-29C to +121C] 5/64, 3/32, 3/16 [2.0, 2.4, 4.8] -20F to +180F [-29C to +82C]
Style #4160
Natural
Red
55-65
Smooth
400
250 [17]
Garlock
Rubber Technologies
WARNING!
Exposure to chemicals, fuels, oils or heat can affect the performance of sheet rubber and cause the product to lose its ability to maintain a seal, causing leakage or other failure which could result in property damage, serious injury or death. Since each application is unique, consult Customer Service at (800) 643-0134 or fax (800) 325-0506 for further information.
Elastomer Blended CR/NBR/ SBR Blended CR/NBR/ SBR Blended CR/NBR/ SBR Blended CR/NBR/ SBR Blended CR/NBR/ SBR
Color Black
Typical Tensile Durometer psi [bar] (Shore A) (Minimum) 35-45 900 (800) [62 (55)] 1,000 (800) [69 (55)] 1,100 (800) [76 (55)] 1,200 (1,000) [83 (69)] 1,400 (1,000) [97 (69)]
Finish Smooth
Approx. Wt Lbs/Yd2 [kg/m2] 1/16" [1.6mm] 3.7 [2.0] 4.0 [2.2] 3.9 [2.1] 4.0 [2.2] 4.1 [2.2]
Stock Gauge* Inches [mm] 1/16 thru 1/2 [1.6 thru 12.7] 1/16 thru 1 [1.6 thru 25.4] 1/32 thru 2 [0.8 thru 50.8] 1/16 thru 1 [1.6 thru 25.4] 1/16 thru 1/2 [1.6 thru 12.7]
Temperature Range -20F to +190F [-29C to +88C] -20F to +190F [-29C to +88C] -20F to +190F [-29C to +88C] -20F to +190F [-29C to +88C] -20F to +190F [-29C to +88C]
Style #254
Black
45-55
Smooth
300
150 [10]
Style #264
Black
55-65
Smooth
300
150 [10]
Style #274
Black
65-75
Smooth
200
150 [10]
Style #284
Black
75-85
Smooth
200
150 [10]
Garlock
Rubber Technologies
Style Style #1051 Branded** Style #5240 Style #5250 Style #5260
Elastomer Neoprene
Color Black
Typical Tensile psi [bar] (Minimum) 1,200 (1,000) [83 (69)] 1,700 (1,500) [117 (104)] 1,800 (1,500) [124 (104)] 1,800 (1,500) [124 (104)]
Finish Smooth
Approx. Wt Lbs/Yd2 [kg/m2] 1/16" [1.6mm] 4.6 [2.5] 3.9 [2.1] 4.0 [2.2] 4.0 [2.2]
Stock Gauge* Inches [mm] 1/16 thru 1/2 [1.6 thru 12.7] MTO** 1/8 [3.2] 1/16, 1/8, 1/4 [1.6, 3.2, 6.4]
Temperature Range -30F to +200F [-34C to +93C] -40F to +200F -40F to +200F [-40C to +93C] -40F to +200F [-40C to +93C]
Garlock
Rubber Technologies
Nitrile sheet is primarily used for applications where resistance to oil, solvents and fuels is required. Garlock offers several styles of nitrile sheet, each carrying different specifications.
Style #361 has a higher tensile strength and is a superior product in applications requiring improved physical properties such as abrasion resistance, tear strength and stretch. ASTM D2000-BF-618 Style #363 is a good quality, oilresistant nitrile sheet. ASTM D2000-BF-610 Style #5340 is a soft, premiumgrade, nitrile sheet with excellent resistance to vegetable and petroleum oils. ASTM D2000-5BG-413-A14B14-E034 Style #5360 is a medium-hard, premium-grade nitrile sheet. ASTM D2000-5BG-615-A14B14-E034
WARNING!
Exposure to chemicals, fuels, oils or heat can affect the performance of sheet rubber and cause the product to lose its ability to maintain a seal, causing leakage or other failure which could result in property damage, serious injury or death. Since each application is unique, consult Customer Service at (800) 643-0134 or fax (800) 325-0506 for further information.
Style Style #361 Style #363 Branded Style #5340 Style #5360
Typical Tensile psi [bar] (Minimum) 2,000 (1,800) [138 (124)] 1,200 (1,000) [83 (69)] 1,600 (1,300) [110 (90)] 2,000 (1,500) [138 (104)]
Approx. Wt Lbs/Yd2 [kg/m2] 1/16" [1.6mm] 3.5 [1.9] 3.8 [2.1] 3.5 [1.9] 3.7 [2.0]
Stock Gauge* Inches [mm] 1/16, 1/8, 1/4 [1.6, 3.2, 6.4] 1/16, 1/8, 1/4 [1.6, 3.2, 6.4] MTO** 1/16, 1/8, 1/4 [1.6, 3.2, 6.4]
Temperature Range -30F to +200F [-34C to 93C] -30F to +200F [-34C to 93C] -40F to +200F [-40C to 93C] -40F to +200F [-40C to 93C]
Pressure Maximum psig [bar] 1/8" [3.2mm] 250 [17] 150 [10]
Nitrile Nitrile
Black Black
35-45 55-65
Smooth Smooth
450 300
Garlock
Rubber Technologies
Mullen Burst Test Ratings For Fabric Obtained using burst tester with 1.24-inch (31.5 mm) diameter opening. Per ASTM D751.
Style No.
3205 3206 3207 3210
1 Ply
370 psig (26 bar) 315 psig (22 bar) 1200+ psig (83+ bar) 1200+ psig (83+ bar)
2 Ply
860 psig (59 bar) 655 psig (45 bar)
3 Ply
1000+ psig (69+ bar) 950 psig (66 bar)
4 Ply
1000+ psig (69+ bar) 1000+ psig (69+ bar)
Product
Durometer Typical Tensile (Shore A) psi [bar] Elastomer Color ** (Minimum)** Black Black Black Black 65-75 65-75 65-75 65-75 1,500 (1,400) [104 (97)] 1,500 (1,400) [104 (97)] 1,500 (1,400) [104 (97)] 1,500 (1,400) [104 (97)]
Approx. Wt Ultimate Lbs/Yd2 Elongation [kg/m2] (% Min.) 1/16" [1.6mm] 300 300 300 300 4.0 [2.2] 3.5 [1.9] 3.5 [1.9] 4.0 [2.2]
Stock Gauge* Inches [mm] 1/16 thru 1/4 [1.6 thru 6.4]
Pressure Maximum psig [bar] 1/8" [3.2mm] 250 [17] 250 [17] 250 [17] 250 [17]
Style #3205 Neoprene Style #3206 Neoprene Style #3207 Neoprene Style #3210 Neoprene
7.5 56 Polyester [1422] 14.0 Cotton 10.0 Nylon 14.0 Nylon 56 [1422] 56 [1422] 56 [1422]
1/16 thru 1/4 -20F to +200F [1.6 thru 6.4] [-29C to + 93C] 1/16 thru 1/4 [1.6 thru 6.4] 1/16 thru 1/4 [1.6 thru 6.4] -20F to +200F [-29C to + 93C] -20F to +200F [-29C to + 93C]
* Refer to Sheet Rubber Tolerances, page 26. ** Figures are for rubber compound without fabric.
Garlock
Rubber Technologies
WARNING!
Exposure to chemicals, fuels, oils or heat can affect the performance of sheet rubber and cause the product to lose its ability to maintain a seal, causing leakage or other failure which could result in property damage, serious injury or death. Since each application is unique, consult Customer Service at (800) 643-0134 or fax (800) 325-0506 for further information.
Typical Tensile psi [bar] (Minimum) 1,700 (1,500) [117 (104)] 1,500 (1,200) [104 (83)]
Stock Gauge* Inches [mm] 1/16 thru 1/4 [1.6 thru 6.4] 5/64, 3/32, 3/16 [2.0, 2.4, 4.8]
Temperature Range -20F to +200F [-29C to +93C] -20F to +180F [-29C to +82C]
Pressure Maximum psig [bar] 1/8" [3.2mm] 250 [17] 250 [17]
10
Garlock
Rubber Technologies
CLOTH-INSERTED SHEET
Garlock cloth-inserted materials are designed to add stability where mechanical fastening is necessary, and to reduce gasket creep where heavy flange loading is required. For low line pressure applications such as air, hot and cold water, saturated steam and low pressure steam.
Multi-Ply C.I. is a smooth-finish SBR/NBR sheet constructed with polyester fabric. Designed to reduce creep in flanges. One ply of fabric per 1/16" (1.6 mm) thickness. ASTM D2000-BC-810-Z1 (Z1 equal to 70-80 Durometer) Style #2102 C.I. is a smooth-finish SBR/NBR sheet, constructed with polyester fabric. One ply of fabric in 1/16" (1.6 mm) through 1/8" (3.2 mm) thicknesses. Two plies of fabric in 3/16" (4.8 mm) and 1/4" (6.4 mm) thicknesses. ASTM D2000-BC-810-Z1 (Z1 equal to 70-85 Durometer) Style #70 C.I. Style #2102 quality with cloth impression. One ply of fabric in 1/16" (1.6 mm) and 1/8" (3.2 mm) thicknesses. Two plies of fabric in 3/16" (4.8 mm) and 1/4" (6.4 mm) thicknesses. ASTM D2000-BC-810-Z1 (Z1 equal to 70-85 Durometer) Style #2564 is a smooth finish EPDM sheet, constructed with polyester fabric. One ply of fabric in 1/16" (1.6 mm) and 1/8" (3.2 mm) thicknesses. Two plies of fabric in 3/16" (4.8 mm) and 1/4" (6.4 mm) thicknesses. For some ozone exposed applications. ASTM D2000-2BA-608-C12 Style #2264 is a smooth finish NBR/CR/SBR sheet, constructed with polyester. For moderate oil resistant applications. One ply of fabric in 1/16" (1.6 mm) through 1/8" (3.2 mm) thicknesses. Two plies of fabric in 3/16" (4.8 mm) and 1/4" (6.4 mm) thicknesses. ASTM D2000-BC-608 Style #2361 is a smooth finish commercial-grade nitrile sheet constructed with polyester fabric. Good oil resistance. One ply of fabric in 1/16" (1.6 mm) through 1/8" (3.2 mm) thicknesses. Two plies of fabric in 3/16" (4.8 mm) and 1/4" (6.4 mm) thicknesses. ASTM D2000-BF-618
Product Multi-Ply C.I. Style #2102 C.I. Style #70 C.I. Style #2264
Elastomer SBR/NBR
Color Black
Typical Tensile psi [bar] (Minimum)** 1,300 (1,000) [90 (69)] 1,300 (1,000) [90 (69)] 1,300 (1,000) [90 (69)] 1,100 (800) [76 (55)] 2,000 (1,800) [138 (124)] 1,200 (1,000) [83 (69)]
Finish Smooth
Approx. Wt. Ultimate Lbs/Yd2 Elongation [kg/m2] (% Min.) 1/16" [1.6mm] 200 4.6 [2.5] 4.6 [2.5] 4.6 [2.5] 3.9 [2.1] 3.3 [1.8] 3.5 [1.9]
Temperature Range -20F to +180F [-29C to +82C] -20F to +180F [-29C to +82C] -20F to +180F [-29C to +82C]
36, 48, 72 1/8, 3/16, 1/4 [914, 1219, [3.2, 4.8, 6.4] 1829] 36, 48, 72 1/16 thru 1/4 [914, 1219, [1.6 thru 6.4] 1829] 48 [1219] 1/16, 1/8 [1.6, 3.2]
SBR/NBR
Black
70-80
Smooth
200
150 [10]
Black Black
70-80 55-65
200 300
36, 72 1/16, 1/8, -20F to +190F [914, 1829] 3/16, 1/4 [1.6, [-29C to + 88C] 3.2, 4.8, 6.4] 36, 72 [914, 1829] 36, 72 [914, 1829] MTO*** MTO*** -20F to +200F [-29C to +93C] -20F to +250F [-29C to +121C]
Black Black
55-65 55-65
Smooth Smooth
300 300
* Refer to Sheet Rubber Tolerances, page 26. ** Figures are for rubber compound without fabric.
11
Garlock
Rubber Technologies
Style #145 is an economical natural rubber which can be used in the same applications as Style #135. ASTM D2000-AA-428-21 Style #7164 is made of SBR and is most often used as chute lining. Other applications include belt wipers and laundry lining. An optional duck fabric backing is also available on minimum quantity orders. ASTM D2000-BA-620 Extruded Skirtboard is made of SBR. Standard sizes available: 1/4" (6.4 mm) gauge in widths of 4", 5", 6", 8", 10", 12", and 48" (102, 127, 152, 203, 254, 305, and 1219 mm) 3/8" (9.5 mm) gauge in widths of 4", 5", 6", 8", 10", 12", and 48" (102, 127, 152, 203, 254, 305, and 1219 mm). 1/2" (12.7 mm) gauge in widths of 4", 5", 6", 8", 10", 12", and 48" (102, 127, 152, 203, 254, 305, and 1219 mm). 3/4" (19.1 mm) gauge in widths of 4", 6", 8", 10", and 12" (102, 152, 203, 254, and 305 mm) 1" (25.4 mm) gauge in widths of 6", 8", 10", and 12" (152, 203, 254, and 305 mm) ASTM D2000-AA-615
For widths not shown, contact Customer Service at (800) 643-0134.
Finish Smooth Smooth 1 side/ Fabric on other Smooth Smooth Smooth Cloth or Smooth
Approx. Wt Lbs/Yd2 [kg/m2] 1/4" [6.4 mm] 1.5 [0.8] 1.4 [0.8]
Stock Gauge* Inches [mm] 1/8 thru 1 [3.2 thru 25.4] 1/8, 1/4, 3/8 [3.2, 6.4, 9.5]
Temperature Range -20F to +200F [-29C to +93C] -20F to +200F [-29C to +93C]
Tan Gum Style #135 Style #145 Style #7164 Extruded Skirtboard
3,400 (3,000) [235 (207)] 3,100 (2,800) [214 (193)] 2,400 (2,000) [166 (138)] 1,800 (1,500) [124 (104)]
1/4 thru 1 [6.4 thru 25.4] 1/16 thru 1 [1.6 thru 25.4] 1/8 thru 1 [3.2 thru 25.4] 1/4 thru 1 [6.4 thru 25.4]
-20F to +180F [-29C to +82C] -20F to +180F [-29C to +82C] -20F to +200F [-29C to +93C] -20F to +180F [-29C to +82C]
12
Garlock
Rubber Technologies
WARNING!
Exposure to chemicals, fuels, oils or heat can affect the performance of sheet rubber and cause the product to lose its ability to maintain a seal, causing leakage or other failure which could result in property damage, serious injury or death. Since each application is unique, consult Customer Service at (800) 643-0134 or fax (800) 325-0506 for further information.
Product VIBLON
Elastomer Nitrile
Color Tan
Finish Smooth
Temperature Range
1/8, 5/64, 11/32, -20F to +200F 1/2, 3/4, 1 [-29C to +93C] [3.2, 6.0, 8.7, 12.7, 19.1, 25.4]
* Contact Customer Service for width and gauge tolerance. Call customer service 1-800-643-0134.
13
Garlock
Rubber Technologies
Garlock Neoprene Bearing Pads provide a uniform transfer of load from beam to substructure. They permit beam rotation at the bearing point due to deflection or misalignment. They absorb vibration and prevent sound transfer, while reducing the destructive action of vibration between movable and stationary structural members. They also provide for movement caused by normal expansion and contraction. Neoprene Bearing Pads are used extensively in bridge structures and prestressed and precast concrete buildings. Also used in industrial machinery and heavy equipment applications. Three styles are available:
Style #256 is stocked in a 48" (1219 mm) width and is made from a high-quality neoprene. Durometer is 45-55 and its minimum ultimate elongation is 400%. CUT SLABS ARE STOCKED AND AVAILABLE. Style #266 is stocked in a 48" (1219 mm) width and is made from a high-quality neoprene. Durometer is 55-65 and its minimum ultimate elongation is 350%. CUT SLABS ARE STOCKED AND AVAILABLE. Style #276 is stocked in a 48" (1219 mm) width and is made from a high-quality neoprene. Durometer is 65-75 and its minimum ultimate elongation is 300%. CUT SLABS ARE STOCKED AND AVAILABLE.
WARNING!
Exposure to chemicals, fuels, oils or heat can affect the performance of sheet rubber and cause the product to lose its ability to maintain a seal, causing leakage or other failure which could result in property damage, serious injury or death. Since each application is unique, consult Customer Service at (800) 643-0134 or fax (800) 325-0506 for further information.
ADDITIONAL MADE-TO-ORDER BEARING PADS AVAILABLE: Natural rubber bearing pad material for colder climates Cal-tran material for the State of California to meet section 51, item 51-1.12H(1) Meets Standard Specifications for Highway Bridges, Fourteenth Edition 1989, Division II, Section 25 - Elastomeric Bearings, and AASHTO Standard Specifications for Transportation Materials and Methods of Sampling and Testing, 17th Edition, M251. NOTE: Some states specify requirements other than standard AASHTO specifications. When ordering, identify all requirements or submit individual state specification.
Product
Style #256
Elastomer Neoprene
Color Black
Typical Tensile Durometer psi [bar] (Shore A) (Minimum) Finish 45-55 2,600 (2,250) Smooth [179 (155)]
Style #266
Neoprene
Black
55-65
Smooth
350
Style #276
Neoprene
Black
65-75
Smooth
300
Approx. Wt Minimum Width* Stock Gauge* Lbs./Yd2 [Kg/m2] Inches Inches Temperature 1/16" [1.6 mm] [mm] [mm] Range 48 [1219] 1/8, 1/4, 1/2, -40F to +200F 3/4, 1 [-40C to + 93C] [3.2, 6.4, 12.7, 19.1, 25.4] 48 [1219] 1/8, 1/4, 1/2, -40F to +200F 3/4, 1 [-40C to + 93C] [3.2, 6.4, 12.7, 19.1, 25.4] 48 [1219] 1/8, 1/4, 1/2, -40F to +200F 3/4, 1 [-40C to + 93C] [3.2, 6.4, 12.7, 19.1, 25.4]
*Refer to Neoprene Bearing Pad Tolerances, page 26. Call customer service 1-800-643-0134.
14
Garlock
Rubber Technologies
Style #9518 sheet rubber, made with VITON fluoroelastomer, is a high-performance product resistant to heat, oils, fuels, numerous acids and other chemicals. ASTM D2000-2HK-710-B37-Z1 (Z1 equals durometer of 75 5 Shore A) Style #505 is a branded, chlorinated polyethylene (CPE) sheet rubber product. CPE has excellent resistance to many chemical groups such as oils, acids, bases and alcohols. CPE is also very resistant to oxidation, heat and ozone. ASTM D2000-2CE-718-B15
Style #506 sheet rubber, made with HYPALON (chlorosulfonated polyethylene) synthetic rubber, is a high-performance product exhibiting excellent resistance to ozone, weathering, heat, certain chemicals and various oils. ASTM D2000-CE-618 STYLE #509 is a branded, chlorobutyl sheet rubber product, also referred to as "Butyl" sheet. ASTM D2000-CA-615
10
Typical Tensile ASTM D412 psi [bar] (Minimum) 1,300 (1,000) [90 (69)] 2,000 (1,800) [138 (124)] 2,100 (1,800) [145 (124)] 1,800 (1,500) [124 (104)]
Stock Gauge* Inches [mm] Pressure Maximum psig [bar] 1/8" [3.2mm] 250 [17]
Product Style #9518 Branded & Scented Style #505 Branded Style #506 Style #509 Branded
Elastomer VITON
Color Black
Finish Smooth
ASTM D412 Approx. Wt. Ultimate Lbs/Yd2 Width* Elongation [kg/m2] Inches (% Min.) 1/16" [1.6mm] [mm] 175 5.4 [2.9] 4.1 [2.2] 3.8 [2.1] 3.3 [1.8] 36, 48 [914, 1219] 36 [914] 36 [914] 36 [914]
Temperature Range
1/16, 1/8, 1/4 -15F to +400F [1.6, 3.2, 6.4] [-26C to +204C] 1/16, 1/8, 1/4 -20F to +275F [1.6, 3.2, 6.4] [-29C to +135C) MTO** 1/16, 1/8, 3/16, 1/4 [1.6, 3.2, 4.8, 6.4] -20F to +300F [-29C to +149C] -30F to +300F [-34C to + 149C]
* Refer to Sheet Rubber Tolerances, page 26. ** Made to Order. VITON and HYPALON are registered trademarks of DuPont Dow Elastomers.
15
Garlock
Rubber Technologies
WARNING:
Testing can be dangerous and should be done only by trained personnel using proper tools and procedures. Failure to follow such procedures might result in damage to property and serious bodily injury. Contact your GARLOCK representative for technical assistance.
For resistance to chemicals other than those in this listing, contact Garlock at (800) 643-0134.
VITON is a registered trademark of DuPont Dow Elastomers.
16
Garlock
Rubber Technologies
MATERIAL
Resistance Ratings:
ACETALDEHYDE ACETIC ACID (GLACIAL) ACETIC ESTER (ETHYL ACETATE) ACETATE (VINYL ACETATE) ACETONE ACID CARBOLIC (PHENOL) ACID, HYDROCHLORIC 10% ACID, HYDROCHLORIC 37% (COLD) ACID, HYDROCHLORIC 37% (HOT) ACID, NITRIC 10% ACID, NITRIC 37% ACID, NITRIC 70% ACID, NITRIC RED FUMING ACID, PHOSPHORIC 20% to 45% ACID, STEARIC ACROLEIN ACRYLONITRILE ALCOHOL, FURFURYL ALKYLAMINE (ETHYLAMINE) ALKYLAMINE (ISOPROPYLAMINE) ALUM ALUMINUM SULFATE 2-AMINOETHANOL AMINOBENZENE
X X X X X A A A F X C C X A A X C C X X A A X X X X F A F F X A
C F C C F C A A F F X X X A F F C C C C A A F X C C F F A F X F
F A F F F F F F F A X X X F F F X X F F F F F F F F C C A F F X
17
A F
Good Resistance The product is usually suitable for service. Fair Resistance The chemical has some deteriorative effects, but the elastomer is still adequate for moderate service. Depends on Condition Moderate service may be possible if chemical exposure is limited or infrequent. Functionality must be determined by testing. Not Recommended The product is unsuitable for service. **At temperatures up to 180F (82C)
For resistance to chemicals other than those listed here, contact Garlock at (800) 643-0134.
WARNING!
Exposure to chemicals, fuels, oils or heat can affect the performance of sheet rubber and cause the product to lose its ability to maintain a seal, causing leakage or other failure which could result in property damage, serious injury or death. Since each application is unique, consult Customer Service at (800) 643-0134 or fax (800) 325-0506 for further information.
AMINO ETHYLETHANOLAMINE AMINO RESINS AMMONIUM HYDROXIDE (38% MAX) AMMONIUM ALUM AMMONIUM NITRATE SOLUTIONS ANILINE DYES ANILINE OIL ANIMAL FATS
Garlock
Rubber Technologies
MATERIAL
Resistance Ratings:
ANTI-FREEZE (ALCOHOL) ANTI-FREEZE (GLYCOL) AQUA REGIA ARSENIC ACID ASPHALT (150 F) BENZENE (BENZOL) BENZOIC ACID BROMINE BUNKER C BUTANONE BUTYL METHACRYLATE CALCIUM CHLORIDE - 40% CALCIUM HYDROXIDE CARBON TETRACHLORIDE CAUSTIC SODA (SODIUM HYDROXIDE) CHLOROBENZENE CHLOROFORM (TRICHLOROMETHANE) COAL NAPHTHA COAL OIL COAL TAR CORN OIL (NON-EDIBLE) COTTONSEED OIL (NON-EDIBLE) CREOSOTE OIL (CREOSOTE) CRUDE OIL
C F C A A A A A A X X A A A X A A A A A A A A A A A A X X F A F
A A C F X X C X X X X A A X A X X X X X F F C C C X X X C X X X
A A X F X X X X X F X A A X A X X X X X F F X X X X X X A X X X
A F
Good Resistance The product is usually suitable for service. Fair Resistance The chemical has some deteriorative effects, but the elastomer is still adequate for moderate service. Depends on Condition Moderate service may be possible if chemical exposure is limited or infrequent. Functionality must be determined by testing. Not Recommended The product is unsuitable for service. **At temperatures up to 180F (82C)
For resistance to chemicals other than those listed here, contact Garlock at (800) 643-0134.
WARNING!
Exposure to chemicals, fuels, oils or heat can affect the performance of sheet rubber and cause the product to lose its ability to maintain a seal, causing leakage or other failure which could result in property damage, serious injury or death. Since each application is unique, consult Customer Service at (800) 643-0134 or fax (800) 325-0506 for further information.
CRUDE TAR CUMENE DECALIN DEXTROSE (FOOD GRADE) 1, 2-DIAMINOETHANE DIBROMOETHANE o-DICHLOROBENZENE DICHLOROMETHANE
(METHYLENE CHLORIDE)
18
Garlock
Rubber Technologies
MATERIAL
Resistance Ratings:
1, 2-DICHLOROPROPANE DIESEL OIL DIETHANOLAMINE DIETHYLENE TRIAMINE 1, 2-DIHYDROXYPROPANE DIMETHYL PHTHALATE ETHANOLAMINE ETHER, PETROLEUM (NAPHTHA) ETHYL ACETATE ETHYL ACRYLATE (ETHYL PROPENOATE) ETHYL ALCOHOL (ETHANOL) ETHYLAMINE (70-72%) ETHYLENE CHOLOROHYDRIN ETHYLENE DIBROMIDE ETHYLENE DICHLORIDE ETHYLENE GLYCOL ETHYLENE GLYCOL METHYL ETHER ETHYL METHYLACRYLATE FATTY ACIDS FORMALDEHYDE (FORMALIN) (40% max) FUEL OILS (No.s 1, 2, 3, 4, 5, 6) FURFURAL FUSEL OIL GALLIC ACID GASOLINE GLUCOSE (FOOD GRADE) GLYCERINE (FOOD GRADE) GLYCOL (ANTI-FREEZE) GRAIN ALCOHOL GREASES
F A X X F F X A X X C X A F A A X X A X A X C A A X X F C A
X F C C F X F C X C A F F X X A F X F C X C F F X X F A A X
X X F F F F F X F F A F F X X A F F F A X X F F X X X A A X
19
A F
Good Resistance The product is usually suitable for service. Fair Resistance The chemical has some deteriorative effects, but the elastomer is still adequate for moderate service. Depends on Condition Moderate service may be possible if chemical exposure is limited or infrequent. Functionality must be determined by testing. Not Recommended The product is unsuitable for service. **At temperatures up to 180F (82C)
For resistance to chemicals other than those listed here, contact Garlock at (800) 643-0134.
WARNING!
Exposure to chemicals, fuels, oils or heat can affect the performance of sheet rubber and cause the product to lose its ability to maintain a seal, causing leakage or other failure which could result in property damage, serious injury or death. Since each application is unique, consult Customer Service at (800) 643-0134 or fax (800) 325-0506 for further information.
Garlock
Rubber Technologies
MATERIAL
Resistance Ratings:
HEPTANE HEXANE HEXENE HYDROBROMIC ACID 20% HYDROCHLORIC - 10% HYDROCHLORIC - 37% (COLD) HYDROCHLORIC - 37% (HOT) HYDROFLUORIC ACID (COLD) HYDROFLUOSILICIC ACID (50% max) HYDROGEN PEROXIDE (50% max) HYDROGEN SULFIDE-WET ISOPROPYLAMINE JP-1, 3, 4, 5 JET FUEL KEROSENE LATEX (SYNTHETIC AND NATURAL) LINSEED OIL LIQUID ROSIN MEK (METHYL ETHYL KETONE) METHYL ALCOHOL METHYL ACRYLATE METHYL CHLOROFORM (1, 1, 1,-TRICHLOROMETHANE) METHYLENE CHLORIDE
A A A A A A F A A F X X A A A F A A X X X A F X F A X A A A A
C C C A A A F A A A F C C C C C F X X A X X X X X F X A X C C
X X X F F F F C F C F F X X X X F X F A F X X X F X X A X X X
A F
Good Resistance The product is usually suitable for service. Fair Resistance The chemical has some deteriorative effects, but the elastomer is still adequate for moderate service. Depends on Condition Moderate service may be possible if chemical exposure is limited or infrequent. Functionality must be determined by testing. Not Recommended The product is unsuitable for service. **At temperatures up to 180F (82C)
For resistance to chemicals other than those listed here, contact Garlock at (800) 643-0134.
WARNING!
Exposure to chemicals, fuels, oils or heat can affect the performance of sheet rubber and cause the product to lose its ability to maintain a seal, causing leakage or other failure which could result in property damage, serious injury or death. Since each application is unique, consult Customer Service at (800) 643-0134 or fax (800) 325-0506 for further information.
METHYL METHACRYLATE METHYL OLEATE MINERAL GREASES MOLASSES (EDIBLE, FOOD GRADE) MOLASSES (NON-EDIBLE) MONOCHLOROBENZENE NAPHTHA NAPHTHA, COAL
20
Garlock
Rubber Technologies
MATERIAL
Resistance Ratings:
NAPHTHALENE NATURAL GASOLINE NITRIC ACID 10% NITRIC ACID 37% NITRIC ACID 70% OIL, COAL OIL, COTTONSEED (NON-EDIBLE) OIL, CREOSOTE OIL, CRUDE OIL, DIESEL OIL, FUEL No. (1, 2, 3, 4, 5 and 6) OIL, LINSEED (NON-EDIBLE) OIL, LUBRICATING OIL, RESIDUAL OIL, SOYBEAN (EDIBLE) OIL, SOYBEAN (NON-EDIBLE) OIL, STOVE (KEROSENE) OIL, TUNG OILS, VEGETABLE (EDIBLE) OILS, VEGETABLE (NON-EDIBLE) OLEIC ACID OLEUM (100%) PALMITIC ACID (10%) PARAFFIN (DEPENDS ON TEMP.)
A A X C C A A A A A A A A A X A A A X A F A A A A F A A X A X A
C X F X X X F C C C C F C C X A C F X A F X F A C X F C C A F A
X X A X X X F X X X X F X X X X X X X X X X F X X X X F F F A A
21
A F
Good Resistance The product is usually suitable for service. Fair Resistance The chemical has some deteriorative effects, but the elastomer is still adequate for moderate service. Depends on Condition Moderate service may be possible if chemical exposure is limited or infrequent. Functionality must be determined by testing. Not Recommended The product is unsuitable for service. **At temperatures up to 180F (82C)
For resistance to chemicals other than those listed here, contact Garlock at (800) 643-0134.
WARNING!
Exposure to chemicals, fuels, oils or heat can affect the performance of sheet rubber and cause the product to lose its ability to maintain a seal, causing leakage or other failure which could result in property damage, serious injury or death. Since each application is unique, consult Customer Service at (800) 643-0134 or fax (800) 325-0506 for further information.
PENTANE PERCHLOROETHYLENE PETROLEUM ETHER PHENOL PHENYLAMINE (ANILINE) PHOSPHORIC ACID 20-45% POLYVINYL ACETATE EMULSIONS POTASSIUM ALUM
Garlock
Rubber Technologies
MATERIAL
Resistance Ratings:
POTASSIUM ALUMINUM SULFATE POTASSIUM SULFATE PROPYLENE DICHLORIDE PROPYLENE GLYCOL ROSIN, LIQUID SODA CAUSTIC SODIUM HYDROXIDE SODIUM HYPOCHLORITE SODIUM SILICATE SOYBEAN OIL (NON-EDIBLE) SOYBEAN OIL (EDIBLE) STABILIZED FAT (NON-EDIBLE) STABILIZED FAT (EDIBLE) STARCH SYRUP (NON-EDIBLE) STEARIC ACID STODDARD SOLVENT STYRENE (MONOMER) SULFURIC ACID 10% 150F SULFURIC ACID 50% 100F SULFURIC ACID 75% 100F SULFURIC ACID 95% 70F SULFURIC ACID 96% AND HIGHER SULFURIC ACID FUMING (140F MAX) SYRUP, CORN (NON-EDIBLE)
A A A F A X X A A A X A X A A A F A A A A A F A X F A X A A A
A A X A F A A A A A X F X A F X X A A A A X X A X X F X C X X
A A X A X A A F A X X F X F F X X F F F X X X A X X F X X X X
A F
Good Resistance The product is usually suitable for service. Fair Resistance The chemical has some deteriorative effects, but the elastomer is still adequate for moderate service. Depends on Condition Moderate service may be possible if chemical exposure is limited or infrequent. Functionality must be determined by testing. Not Recommended The product is unsuitable for service. **At temperatures up to 180F (82C)
For resistance to chemicals other than those listed here, contact Garlock at (800) 643-0134.
WARNING!
Exposure to chemicals, fuels, oils or heat can affect the performance of sheet rubber and cause the product to lose its ability to maintain a seal, causing leakage or other failure which could result in property damage, serious injury or death. Since each application is unique, consult Customer Service at (800) 643-0134 or fax (800) 325-0506 for further information.
SYRUP, CORN (EDIBLE) TALLOL TALLOW (NON-EDIBLE) TALLOW (EDIBLE) TAR CRUDE TETRACHLOROETHYLENE TETRACHLOROMETHANE
22
Garlock
Rubber Technologies
MATERIAL
Resistance Ratings:
TETRALIN TOLUENE TRICHLOROETHANE TRICHLOROETHYLENE TRICHLOROMETHANE (CHLOROFORM) TUNG OIL TURPENTINE UREA VARNISH VEGETABLE GREASES VEGETABLE OILS (NON-EDIBLE) VEGETABLE OILS (EDIBLE) VINEGAR (EDIBLE) VINYL ACETATE (INHIBITED) VINYL BENZENE (STYRENE) VINYL TOLUENE WATER GLASS WHITE SPIRITS (NAPHTHA) XYLENE
A A A A A A A F A A A X X X F X A A F
X X X X X F X A X F F X X X X X A C X
X X X X X X X F X F F X X F X X A X X
A F
Good Resistance The product is usually suitable for service. Fair Resistance The chemical has some deteriorative effects, but the elastomer is still adequate for moderate service. Depends on Condition Moderate service may be possible if chemical exposure is limited or infrequent. Functionality must be determined by testing. Not Recommended The product is unsuitable for service. **At temperatures up to 180F (82C)
For resistance to chemicals other than those listed here, contact Garlock at (800) 643-0134.
WARNING!
Exposure to chemicals, fuels, oils or heat can affect the performance of sheet rubber and cause the product to lose its ability to maintain a seal, causing leakage or other failure which could result in property damage, serious injury or death. Since each application is unique, consult Customer Service at (800) 643-0134 or fax (800) 325-0506 for further information.
23
Garlock
Rubber Technologies
+ -
Excellent resistance to acids and alkalis. Excellent weathering properties and heat resistance. Excellent electrical resistance. Low permeability to air. Poor resistance to fuels, solvents, oils and hydrocarbons. Cold weather properties are fair.
Excellent oxidation resistance. Good oil resistance, heat resistance, ozone resistance and weather resistance. Fair resistance to ketones and ethers.
+ + + + -
Poor cold weather properties. Good oil resistance, ozone resistance, heat resistance and weather resistance. Resists corrosive chemicals. Fair resistance to ketones and ethers. Tear resistance is fair. Poor resistance to aldehydes, aromatic solvents, esters, and chlorinated solvents.
Excellent resistance to ozone, sunlight and oxygen. Excellent resistance to acids, alkalis and ketones. Excellent heat resistance and aging. Poor resistance to fuels and oils. Excellent resistance to heat and oil combinations: hot greases found in engines and compressors. Excellent resistance to a wide range of concentrated acids. High cost of fluoroelastomer may limit usage to extreme applications. Resilience is low and tear strength is limited unless certain compounding steps are taken to improve it. Impact resistance is fair. Good abrasion resistance and excellent impact and cut-and-gouge resistance. Can be compounded for use as skirtboard rubber, lining rubber, conveyor belt covers, tires and other extremely demanding applications. Used as gasket material and as an economical general purpose sheet. Not suited for use with oils, fuels, solvents, or hydraulic fluids.
24
Garlock
Rubber Technologies
Silicone
properties for both hot and cold temperature extremes; + Excellent excellent weathering properties; resists ozone and oxygen attack.
resistance to oils, fuels, and hydrocarbons. Fair performance - Poor when exposed to acids, alkalis and solvents. Physical properties (tensile, abrasion, tear and cut growth) are fair. Natural rubber NR (Gum) gasket material due to excellent physical properties such as + Good resilience, tear strength and wear resistance. Natural rubber is used effectively as sand and shot blast curtain material because of its high abrasion resistance and resilience. when exposed to oils, fuels, solvents, and hydraulic - Deteriorates fluids. Poor resistance to sunlight, ozone and oxygen. oil- and petroleum-based solvent resistance. Good weather + Good and ozone resistance. Neoprene may be blended with SBR rubber to achieve an economically priced sheet for moderately oil resistant applications. resistance to degreaser solvents. Content levels of neoprene - Poor can vary widely. Application problems may occur when using blended or commercial grades of neoprene sheet of unknown quality levels in contact with oil, solvents and fuels. Where good oil or fuel resistance is required, the fabricator and user need to specify one of the following: Nitrile (butadiene-acrylonitrile) A known manufacturers product An ASTM call-out A military specification An ASTM-specified oil resistance level based on an ASTM test (e.g. oil swell)
Neoprene CR (chloroprene)
Garlock
Rubber Technologies
NON-STOCK ITEMS
Information Necessary for Custom Manufacturing
A complete description of the product requirements and proposed service conditions should be furnished. This will enable us to quote the proper grade for best service at the lowest cost. Any samples submitted should be at least a 12 inch (300 mm) square. Use the following checklist to furnish data: If you need sheet products other than those in this catalog, let us know your requirements. We have complete facilities to make a wide variety of custom products, using our formulations or your specifications. Products can be manufactured with a variety of surface impressions from smooth to cotton fabric, fine or coarse nylon.
Description 1. Thickness, width and length 2. Tolerance (commercial or special) 3. Quantity 4 Durometer 5 (Shore A) 5. Tensile strength 6. Elongation 7. Cloth-inserted (C.I.) 8. Clothone side (C.O.S.) 9. Clothboth sides (C.B.S.) 10. All rubber 11. Surface (smooth, cloth impression) 12. Color 13. Untrimmed or trimmed to size Service Conditions 1. Temperature 2. Heat (air, steam, water, oil) 3. Oil (type and extent of contact) 4. Chemicals 5. Concentration of chemical (%) 6. Partially or totally confined gasket 7. Abrasive condition(s) 8. Ozone 9. Other pertinent data Specifications to be Met 1. Government 2. ASTM or SAE 3. Customer 4. Blueprint 5. Other
Tolerance Inches mm .012 0.3 .016 0.4 .020 0.5 .031 0.8 .047 1.2 .063 1.6 .093 2.4 10% Tolerance
1" 25.4
ASTM Specifications
If you have other applications requiring other ASTM specifications not listed, please contact customer service at (800) 643-0134.
26
Garlock
Rubber Technologies
M 2 B G 5 1 0 EO 3 4
A temperature of test - in this example, 212F (100C) A method of test - in this example, ASTM D 471, ASTM No. 903 oil, 70 hours Additional requirement - in this example, fluid resistance Tensile strength - in this example, 1000 psi (6.89 MPa) Hardness - in this example, 50 5 using a Shore A durometer Class of oil resistance - in this example, a maximum volume swell of 40% in ASTM No. 903 oil Type of heat resistance - in this example, 212F (100C) Grade number - used only when requirements are needed in addition to basic requirements Only used when specification is based on SI units of measure
27
Garlock
Rubber Technologies
1 Inch = 25.4 mm
mm Inch
101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 3.976378 4.015748 4.055118 4.094488 4.133858 4.173228 4.212599 4.251969 4.231339 4.330709 4.370079 4.409449 4.448819 4.488189 4.527559 4.566929 4.606299 4.645669 4.685039 4.724410 4.763780 4.803150 4.842520 4.881890 4.921260
mm
26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
Inch
1.023622 1.062992 1.102362 1.141732 1.181102 1.220472 1.259843 1.299213 1.338583 1.377953 1.417323 1.456693 1.496063 1.535433 1.574803 1.614173 1.653543 1.692913 1.732283 1.771654 1.811024 1.850394 1.889764 1.929134 1.968504
mm
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
Inch
mm Inch
2.992126 3.031496 3.070866 3.110236 3.149606 3.188976 3.228346 3.267717 3.307087 3.346457 3.385827 3.425197 3.464567 3.503937 3.543307 3.582677 3.622047 3.661417 3.700787 3.740157 3.779528 3.818898 3.858268 3.897638 3.937008
mm
126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150
Inch
4.960630 5.000000 5.039370 5.078740 5.118110 5.157480 5.196851 5.236221 5.275591 5.314961 5.354331 5.393701 5.433071 5.472441 5.511811 5.551181 5.590551 5.629921 5.669291 5.708662 5.748032 5.787402 5.826772 5.866142 5.905512
mm
151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175
Inch
5.944882 5.984252 6.023622 6.062992 6.102362 6.141732 6.181102 6.220473 6.259843 6.299213 6.338583 6.377953 6.417323 6.456693 6.496063 6.535433 6.574803 6.614173 6.653543 6.692914 6.732284 6.771654 6.811024 6.850394 6.889764
mm
176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200
Inch
6.929134 6.968504 7.007874 7.047244 7.086614 7.125984 7.165354 7.204725 7.244095 7.283465 7.322835 7.362205 7.401575 7.440945 7.480315 7.519685 7.559055 7.598425 7.637795 7.677165 7.716536 7.755906 7.795276 7.834646 7.874016
2.007874 76 2.047244 77 2.086614 78 2.125984 79 2.165354 80 2.204724 81 2.244094 82 2.283465 83 2.322835 84 2.362205 85 2.401575 86 2.440945 87 2.480315 88 2.519685 89 2.559055 90 2.598425 91 2.637795 92 2.677165 93 2.716535 94 2.755906 95 2.795276 96 2.834646 97 2.874016 98 2.913386 99 2.952756 100
28
Garlock
Sealing Technologies
Fax: 1-315-597-3216 Fax: 1-803-783-4279 Fax: 1-281-458-0502 Fax: 61-2-9793-2544 Fax: 55-11-884-9680 Fax: 1-905-829-3333 Fax: 44-1635-569573 Fax: 33-4-7743-5151 Fax: 49-2131-349-222 Fax: 822-554-6343 Fax: 52-5-368-0418 Fax: 65-254-6708
GPS-6/00-Rev C-1M
Garlock Rubber Technologies 201 Dana Drive Paragould, AR 72450 Phone: 870-239-4051 800-643-0134 Fax: 870-239-4054 800-325-0506
Other Garlock facilities are located in: Palmyra, NY, USA 1-800-448-6688 Columbia, SC, USA 1-803-783-1880 Houston, TX, USA 1-281-459-7200 Sydney, Australia 61-2-9793-2511 So Paulo, Brazil 55-11-884-9680 Oakville, Canada 1-905-829-3200 Berkshire, England 44-1635-38509 Saint-tienne, France 33-4-7743-5100 Neuss, Germany 49-2131-3490 Seoul, Korea 822-554-6341 Mexico City, Mexico 52-5-567-7011 Singapore 65-254-7372
GRT 1:1