Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
TAPCON 240 anD TAPCON 260 VOLTAGE REGULATORS FOR EVERY APPLICATION.
Maschinenfabrik Reinhausen (MR) has been developing and manufacturing voltage regulators for over 40 years. All this time, our goal has been to provide our customers with the best possible solutions. The voltage regulators of the TAPCON series provide the right device for all scenarios.
The modular system used in our TAPCON 240 and TAPCON 260 voltage regulators provides maximum exibility and a comprehensive scope of function. TAPCON 240 and TAPCON 260 allow you to run up to 16 transformers in parallel and support the current control system protocols for station automation ideal for exible and convenient voltage regulation. Commissioning on site is done quickly and, above all, in a user-friendly manner thanks to the TAPCON-trol conguration software.
and very complex applications such as regulating three-winding transformers or banks of transformers I Parallel operation of up to 16 transformers I Optional: integrated on-load tap-changer monitoring
Graphic display
I Contrast-rich graphics display with clearly arranged
shown in the display, rendering additional displays in the switch cabinet unnecessary I Illustration of time sequences for measured values and/or analog signals
Communication
I Support for all common control system protocols I TAPCON 260 can also be integrated into redundant
SCADA
TAPCON-trol
STATION LEVEL
TAPCON-trol RSP20/25
TAPCON 240
TAPCON 260
PROCESS LEVEL
V desired B Bandwidth
Extending beyond the function of the TAPCON 240, our professional TAPCON 260 device offers virtually unlimited possibilities. The rmware of the TAPCON 260 is adapted specically to your needs. This produces a voltage regulator which can handle simple regulation tasks as well as complex challenges and thereby satisfy your every requirement including the regulation of three-winding transformers, parallel transformer bank operations, or individual programming for the phase-shift oscillator regulation.
on-load tap-changers. In this application, one single TAPCON 260 voltage regulator is enough to control the three motor-drive units. The load voltage of a bank of transformers is regulated as per the voltage regulation description.
TAPCON 260
TAPCON 240
V V V
100 MW generator
TAPCON 260
TAPCON 240
100 MW
TA TAPCON 240
x 16 x x x x x x x x x x x 19" (1/2 19")
TAPCON 260
x 16 x x x x x x x x x x x x x x x x 19" (1/2 19")
TAPCON 260 APPLICATION EXAMPLE: 3 PHYSICALLY SEPARATE SINGLE-PHASE TRANSFORMERS USED AS PHASE SHIFTERS
We were contacted by an Austrian energy provider with a very challenging job: one phase shifter comprising three single-phase transformers. MR's solution: three sets, each comprising three VACUTAP VR on-load tap-changers combined with two COMTAP ARS off-circuit tap-changers. This complex regulation challenge was solved with special programming on four TAPCON 260 voltage regulators. One TAPCON 260 was tted into each of the tap-changer drives of the individual phases (3 x slave) and one master TAPCON 260 was placed in the control room.
Maschinenfabrik Reinhausen GmbH Falkensteinstrasse 8 93059 Regensburg, Germany Phone: +49 941 4090-0 Fax: +49 941 4090-7001 Email: info@reinhausen.com www.reinhausen.com
Please note: The data in our publications may differ from the data of the devices delivered. We reserve the right to make changes without notice. IN3430220/00 EN TAPCON 240 TAPCON 260 F0305500 07/13 uw Maschinenfabrik Reinhausen GmbH 2013