Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Broadcast Storm Control Virtual LANs (VLANs) Multicast Filtering Spanning Tree Protocol (802.1D-1998) Rapid Spanning Tree Protocol (802.1w) Quality of Service (QoS) RMON Email Notification of Events Management Security
Disconnect Unauthorized Device (DUD) supported Network login (IEEE802.1X) Radius Authenticated Device Access (RADA) supported
Alert LED
For detailed descriptions of the Web interface operations and the Command Line Interface (CLI) commands that you require to manage the Switch please refer to the Management Interface Reference Guide supplied in HTML format on the CD-ROM that accompanies your Switch.
Management Folder Setup Alert Monitor System Folder Getting Started Console Control Management Telnet Unit Backup Configuration Telnet Folder Connect
Unit Folder NameLED Alert Notepad Name Notepad
Alert Folder Create Modify Test Delete Summary Monitor Folder Modify Summary
Backup Configuration Folder Save Restore Address Database Folder Add Aging Time Find Remove Summary Top-level Device View
System Bridge Physical Interface Protocol Security
Modify Folder
Add Port Admin State LACP State Partner ID Remove Port
Bridge Folder Address Database Broadcast Storm Control Link Aggregation Multicast Filter Spanning Tree
Link Aggregation Folder Modify Summary Multicast Filter Folder IGMP Spanning Tree Folder
IGMP Folder
SnoopMode
Setup
Ethernet Folder History Setup Smart Autosensing Statistics Port Setup Summary IP Folder Setup Device Folder User Network Folder Access RADIUS Folder
Accounting Authentication Retries Shared Secret Summary
User Folder Modify Access Folder Port Security Secure Addresses Detail Summary System Mode System Summary Secure Addresses Folder Display/Edit Accounting Folder
Display Modify
Protocol Folder IP
Authentication Folder
Display Modify
For detailed descriptions of the web interface operations and the command line interface (CLI) commands that you require to manage the Switch please refer to the Management Interface Reference Guide supplied in HTML format on the CD-ROM that accompanies your Switch.
Setup
Unit
4
Operation (Continued) System Unit Notepad System Backup Configuration Save System Backup Configuration Restore Bridge Address Database Add Bridge Address Database Aging Time Bridge Address Database Find Bridge Address Database Remove Bridge Address Database Summary Bridge Broadcast Storm Control Setup Bridge Link Aggregation Modify AddPort Bridge Link Aggregation Modify Admin State Bridge Link Aggregation Modify LACP State Bridge Link Aggregation Modify Partner ID Bridge Link Aggregation Modify Remove Port Bridge Link Aggregation Summary Bridge Multicast Filter IGMP SnoopMode Bridge Spanning Tree Setup Physical Interface Ethernet History History-1 Hour What does the Operation do? Opens a notepad for the unit. Saves the current configuration of the stack to a file. Restores the configuration of the stack from a file. Adds an address to the database. Configures the aging period for the address database. Displays the location of a MAC address. Deletes an address from the database. Views all addresses that are stored against a particular port or aggregated link. Configures Broadcast Storm Control parameters for the stack. Adds a port to an aggregated link. Changes the state of an aggregated link. Enables or disables LACP on a port. Sets an aggregated link to connect to a specified partner unit. Deletes a port from an aggregated link. Lists all of the aggregated links. Configures IGMP multicast learning for the unit. Configures spanning tree parameters. Displays packet activity for all ports on a unit over the previous hour.
Physical Interface Ethernet History History-48 Hours Displays packet activity for all ports on a unit over the previous 48 hours. Physical Interface Ethernet Setup Physical Interface Ethernet Smart Autosensing Physical Interface Ethernet Statistics Physical Interface Ethernet Port Setup Summary Protocol IP Setup Security Device User Modify Security Network Access Port Security Security Network Access Secure Addresses Display/Edit Security Network Access Detail Security Network Access Summary Security Network Access System Mode Security Network Access System Summary Security RADIUS Accounting Display Security RADIUS Accounting Modify Security RADIUS Authentication Display Security RADIUS Authentication Modify Security RADIUS Retries Security RADIUS Shared Secret Sets up single or multiple ethernet ports. Configures smart autosensing for the unit. Displays statistics for packet and error traffic on one or more ports. Displays summary information for the stack. Configures the IP information for the unit. Modifies the password of the current user. Sets the security mode of single or multiple ports on a unit. Displays and configures Secure Address settings. Displays detailed information on port security settings. Displays summary information on network access. Enables or disables network security. Displays summary information on the system security settings. Displays RADIUS accounting statistics. Modifies RADIUS accounting configuration. Displays RADIUS authentication statistics. Modifies RADIUS authentication configuration. Modifies RADIUS retry parameters. Modifies RADIUS security key.
To display sub-menus: At the Select menu option prompt, enter the name of the menu or menus. To display parent menus: At the Select menu option prompt, enter quit. To display the Top-level menu: Press the [Esc] key. To obtain help: At the Select menu option prompt, enter ?.
Address Database Menu add agingTime find remove summary Link Aggregation Menu detail modify summary Multicast Filter Menu igmp routerPort Port Menu detail lacpState linkTrap stpCost stpFastStart summary Spanning Tree Menu stpDefaultPathCost stpForwardDelay stpHelloTime stpMaxAge stpPriority stpState stpVersion
VLAN Menu create delete detail modify summary
Modify Menu
fastLeave
IGMP Menu modify IGMP Menu queryMode queryMode snoopMode snoopMode
Bridge Menu addressDatabase broadcastStormCtrl linkAggregation multicastFilter port spanningTree summary vlan Top-level Menu bridge gettingStarted logout physicalInterface protocol security system trafficManagement
Ethernet Menu
detail flowControl portCapabilities portMode portState smartAutosense summary
Protocol Menu ip
Security Menu
device network radius
Top-level Menu
bridge gettingStarted logout physicalInterface protocol security system trafficManagement
RADIUS Menu
accounting authentication pollTime retries setup sharedSecret summary
display modify
Control Menu
initialize reboot softwareUpgrade
Management Menu alert contact location monitor name password remoteAccess snmp
Alert Menu addAddress create delete modify removeAddress summary test Monitor Menu modify summary SNMP Menu community get next set trap Trap Menu create delete modify summary
Unit Menu
alertLED select
Top-level Menu
bridge gettingStarted logout physicalInterface protocol security system trafficManagement
Classifier Menu create delete detail modify summary Profile Menu addClassifier assign create delete detail listPorts modify removeClassifier summary Service Level Menu summary Traffic Queue Menu holProtection summary
For detailed descriptions of the Web interface operations and the Command Line Interface (CLI) commands that you require to manage the Switch please refer to the Management Interface Reference Guide supplied in HTML format on the CD-ROM that accompanies your Switch.
What does the Command do? Adds a statically configured address. Sets the bridge address aging time. Finds an address. Removes an address. Displays summary information on addresses. Enables or disables broadcast storm control. Displays detailed information on an aggregated link. Adds a port to an aggregated link. Enables or disables an aggregated link. Sets an aggregated link to connect to a specified partner unit. Removes a port from an aggregated link.
Command (Continued)
bridge linkAggregation summary bridge multicastFilter igmp modify fastLeave bridge multicastFilter igmp queryMode bridge multicastFilter igmp snoopMode bridge multicastFilter routerPort addPort bridge multicastFilter routerPort autoDiscovery bridge multicastFilter routerPort removePort bridge multicastFilter routerPort summary bridge port detail bridge port lacpState bridge port linkTrap bridge port stpCost bridge port stpFastStart bridge port summary bridge spanningTree stpDefaultPathCost bridge spanningTree stpForwardDelay bridge spanningTree stpHelloTime bridge spanningTree stpMaxAge bridge spanningTree stpPriority bridge spanningTree stpState bridge spanningTree stpVersion bridge summary bridge vlan create bridge vlan delete bridge vlan detail bridge vlan modify addPort bridge vlan modify name bridge vlan modify removePort bridge vlan summary gettingStarted logout physicalInterface ethernet detail physicalInterface ethernet flowControl physicalInterface ethernet portCapabilities physicalInterface ethernet portMode physicalInterface ethernet portState physicalInterface ethernet smartAutosense physicalInterface ethernet summary protocol ip basicConfig
What does the Command do? Displays summary information on an aggregated link. Enables or disables IGMP fast leave. Enables or disables IGMP query mode. Enables or disables IGMP Multicast learning. Adds a statically configured router port. Enables or disables router port auto discovery. Removes a router port. Displays summary information on a router port. Displays detailed information on a port. Enables or disables LACP on a port. Enables or disables Port Link Traps. Sets the Spanning Tree path cost parameter. Enables or disables Spanning Tree fast start. Displays summary information on a port. Sets the bridge Spanning Tree default path costs Sets the bridge Spanning Tree forward delay parameter. Sets the bridge Spanning Tree hello time parameter. Sets the bridge Spanning Tree maximum age parameter. Sets the bridge Spanning Tree priority parameter. Enables or disables Spanning Tree on a bridge. Selects the version of Spanning Tree to run on the bridge Displays summary information on the bridge. Creates a VLAN. Deletes a VLAN. Displays detailed information on a VLAN. Adds a port to a VLAN. Names a VLAN. Removes a port from a VLAN. Displays summary information on a VLAN. Displays the CLI Wizard Logs the User out of the CLI. Displays detailed information on an Ethernet port. Enables or disables flow control. Sets the port capabilities. Sets the port speed and duplex mode. Enables or disables an Ethernet port. Enables or disables smart autosensing. Displays summary information on an Ethernet port. Performs basic IP management configuration.
10
Command (Continued)
protocol ip initializeConfig protocol ip interface modify protocol ip interface summary protocol ip ping protocol ip route default protocol ip route noDefault protocol ip route summary security device access modify security device access summary security device user create security device user delete security device user modify security device user pwdRecover security device user summary security network access detail security network access portSecurity security network access secureAddresses add security network access secureAddresses remove security network access secureAddresses summary security network access summary security network access systemMode security network access systemSummary security radius accounting display security radius accounting modify security radius authentication display security radius authentication modify security radius pollTime security radius retries security radius setup security radius sharedSecret security radius summary system backupConfig restore system backupConfig save system control initialize system control reboot system control softwareUpgrade system inventory system management alert addAddress system management alert create
What does the Command do? Resets IP information to factory defaults. Modifies IP interface information. Displays summary information on the IP interface. Polls remote devices. Defines the default route. Removes the default route. Displays summary information on the default route. Modifies access rights. Displays summary information on access rights. Creates a user. Deletes a user. Modifies a user. Enables or disables password recovery. Displays summary information on users. Displays summary information on port users. Enables or disables DUD and NTK. Add a secure MAC address to a port. Removes a secure MAC address from a port. Displays the secure MAC addresses on specified ports. Displays summary information on port security settings. Enables or disables network security. Displays summary information on the system security settings. Displays RADIUS accounting statistics. Modified RADIUS accounting configuration. Displays RADIUS authentication statistics. Modifies RADIUS authentication configuration. Sets the RADIUS failure poll time. Modified RADIUS retry parameters. Performs RADIUS configuration. Modified RADIUS security key. Displays summary information on RADIUS. Restores the configuration of the stack from a file. Saves the current configuration of the stack to a file. Resets to factory defaults. Performs a system reboot. Performs an agent software upgrade. Displays stack information. Adds an email address to an alert. Creates an alert.
Command (Continued)
system management alert delete system management alert modify system management alert removeAddress system management alert summary system management alert test system management contact system management location system management monitor modify system management monitor summary system management name system management password system management remoteAccess system management snmp community system management snmp get system management snmp next system management snmp set system management snmp trap create system management snmp trap delete system management snmp trap modify system management snmp trap summary system summary system unit alertLED system unit select trafficManagement qos classifier create trafficManagement qos classifier delete trafficManagement qos classifier detail trafficManagement qos classifier modify trafficManagement qos classifier summary trafficManagement qos profile addClassifier trafficManagement qos profile assign trafficManagement qos profile create trafficManagement qos profile delete trafficManagement qos profile detail trafficManagement qos profile listPorts trafficManagement qos profile modify trafficManagement qos profile removeClassifier trafficManagement qos profile summary trafficManagement qos serviceLevel summary
What does the Command do? Deletes an alert. Modifies an existing alert. Removes an email address from an alert. Displays summary information for the alert settings. Generates a test alert. Sets the system contact. Sets the system location. Modifies a monitored item. Displays summary information for monitored items. Sets the system name. Sets the system password. Changes remote access permissions. Sets the SNMP community string. Gets SNMP objects. Gets the next SNMP objects. Sets SNMP objects. Creates a trap destination. Deletes a trap destination. Modifies a trap destination Displays summary information on a trap destination. Displays summary information. Controls the Alert LED. Inputs commands to another unit. Creates a classifier. Deletes a classifier. Displays detailed classifier information. Modifies a classifier. Displays summary information on classifiers. Adds a classifier to a QoS profile. Assigns QoS profiles to ports. Creates a QoS profile. Deletes a QoS profile. Displays detailed information about a QoS profile. Lists all ports with their associated QoS profiles. Modifies a QoS profile. Removes a classifier from a QoS profile. Displays a summary of QoS profiles. Displays summary information on service levels.
11
12
Command (Continued)
trafficManagement qos trafficQueue holProtection trafficManagement qos trafficQueue summary
What does the Command do? Adjusts the Head of Line blocking settings for Ethernet ports. Displays summary information on traffic queues.
Copyright 2002, 2005, 3Com Corporation. All rights reserved. Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or may not be registered in other countries. 3Com, the 3Com logo and SuperStack are registered trademarks of 3Com Corporation. Part Number: DQA1730-0AAA03 Published: July 2005