Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
www.vishay.com
Vishay Semiconductors
AGENCY APPROVALS
Underwriters lab file no. E52744 cUL tested to CSA 22.2 bulletin 5A DIN EN 60747-5-5 (VDE 0884-5)
i179004-14
DESCRIPTION
The CNY17 is an optically coupled pair consisting of a gallium arsenide infrared emitting diode optically coupled to a silicon NPN phototransitor. Signal information, including a DC level, can be transmitted by the device while maintaining a high degree of electrical isolation between input and output. The CNY17 can be used to replace relays and transformers in many digital interface applications, as well as analog applications such as CRT modulation.
ORDERING INFORMATION
C N Y 1 7 # CTR BIN X 0 # # T TAPE AND REEL
DIP-6
Option 6
PART NUMBER
PACKAGE OPTION
7.62 mm Option 7
10.16 mm Option 9
> 8 mm
8 mm typ.
AGENCY CERTIFIED/PACKAGE UL, cUL, BSI, FIMKO DIP-6 DIP-6, 400 mil, option 6 SMD-6, option 7 SMD-6, option 9 VDE, UL, CUL, BSI, FIMKO DIP-6 DIP-6, 400 mil, option 6 SMD-64, option 7 SMD-6, option 9 Note (1) Also available in tubes, do not put T on the end. 40 to 80 CNY17-1 CNY17-1X006 CNY17-1X007T (1) CNY17-1X009T (1) 40 to 80 CNY17-1X001 CNY17-1X016 CNY17-1X017 63 to 125 CNY17-2 CNY17-2X006
CTR (%) 100 to 200 CNY17-3 CNY17-3X006 CNY17-3X007T (1) CNY17-3X009T (1) 100 to 200 CNY17-3X001 CNY17-3X016 CNY17-3X017T (1) 160 to 320 CNY17-4 CNY17-4X006 CNY17-4X007T (1) CNY17-4X009T (1) 160 to 320 CNY17-4X001 CNY17-4X016 CNY17-4X017T (1) -
CNY17-2X007T (1) CNY17-2X009T (1) 63 to 125 CNY17-2X001 CNY17-2X016 CNY17-2X017T (1) CNY17-2X019T (1)
Document Number: 83606 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CNY17
www.vishay.com
Vishay Semiconductors
TEST CONDITION SYMBOL VR IF tp 10 s at 25 C IFSM Pdiss BVCEO BVEBO IC IC Pdiss VISO VALUE 6 60 2.5 70 70 7 50 100 150 5000 7 7 0.4 175 VIO = 500 V, Tamb = 25 C VIO = 500 V, Tamb = 100 C RIO RIO Tstg Tamb Tsld Pdiss 1012 1011 - 55 to + 150 - 55 to + 110 260 220 C C C mW UNIT V mA A mW V V mA mA mW VRMS mm mm mm
tp/T = 0.5, tp 10 ms
t=1s
2 mm from case, 10 s
Notes Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP).
VCE = 10 V
Note Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. Rev. 1.9, 25-Oct-12 Document Number: 83606 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CNY17
www.vishay.com
Vishay Semiconductors
PART CNY17-1 CNY17-2 CNY17-3 CNY17-4 CNY17-1 CNY17-2 CNY17-3 CNY17-4 SYMBOL CTR CTR CTR CTR CTR CTR CTR CTR MIN. 40 63 100 160 13 22 34 56 TYP. MAX. 80 125 200 320 UNIT % % % % % % % %
30 45 70 90
PART
MIN.
MAX.
UNIT s s s s kHz s s s s s s s s s s s s s s s s
CNY17-1 CNY17-2 CNY17-3 CNY17-4 CNY17-1 CNY17-2 CNY17-3 CNY17-4 CNY17-1 CNY17-2 CNY17-3 CNY17-4 CNY17-1 CNY17-2 CNY17-3 CNY17-4
100 % 90 %
Oscilloscope R L = 1 M C L = 20 pF
10 % 0 tr td t on tp td tr t on (= td + tr) Pulse duration Delay time Rise time Turn-on time ts tf t off t
RL
ts tf t off (= ts + tf)
1 k
Oscilloscope R L 1 M C L 20 pF
Fig. 2 - Test Circuit, Saturated Operation Document Number: 83606 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CNY17
www.vishay.com TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified)
Vishay Semiconductors
1.8 1.7 Tamb = 0 C 1.6 Tamb = - 25 C 1.5 1.4 Tamb = - 40 C 1.3 T = - 55 C amb 1.2 1.1 Tamb = 25 C 1.0 Tamb = 50 C 0.9 Tamb = 75 C 0.8 0.7 Tamb = 100 C 0.6 0.1 1 10 100 IF - Forward Current (mA)
10 000
IF = 0 mA
1000
VCE = 40 V
20
40
60
80 100
30
IF = 15 mA
20 10 0 0 1 2 3 4 5
IF = 10 mA IF = 5 mA
20
40
60
80 100
1.2
IF = 10 mA VCE = 0.4 V
20 15
IF = 10 mA
10
IF = 5 mA
0.4 0.2 0 - 60 - 40 - 20
5
IF = 1 mA IF = 2 mA
0 0 0.1 0.2 0.3 0.4 VCE - Collector Emitter Voltage (sat) (V)
20
40
60
80 100
Document Number: 83606 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CNY17
www.vishay.com
Vishay Semiconductors
1000
VCC = 5 V Tamb = 25 C Tamb = 0 C Tamb = - 40 C Tamb = - 55 C
100
10
0 0.1
10
100
1 0.1
10
100
1000
VCE = 5 V, IF = 10 mA Tamb = 25 C Tamb = 0 C Tamb = - 40 C Tamb = - 55 C
toff
100
10
ton
10
100
0.1 0.1
10
100
0
VCE = 5 V
- 20 - 40 Phase (deg) - 60 - 80 - 100 - 120 - 140 - 160 1 10 100 1000 f - Frequency (kHz)
Document Number: 83606 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CNY17
www.vishay.com PACKAGE DIMENSIONS in millimeters
6 5 4
Vishay Semiconductors
6.5 0.5
7.3 0.5
7.62 0.3
1.1 0.1 3.5 0.3 0.5 typ. 2.8 0.5 3.3 0.5
Option 6
7.62 typ.
Option 7
7.62 typ.
Option 9
7.62 typ. 3.5 0.3 0.1 0.1 3.5 0.3
0.6 min.
8 min. 11.05
1.52
PACKAGE MARKING
CNY17-3
Pin 1 I.D.
V YWW 25
Notes VDE logo is only marked on option 1 parts. Option information is not marked on the part. Tape and reel suffix (T) is not part of the package marking.
Document Number: 83606 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CNY17
www.vishay.com TUBE AND TAPE INFORMATION DEVICES PER TUBE
TYPE DIP-6 UNITS/TUBE 50 TUBES/BOX 40
2 0.1 4 0.1
Vishay Semiconductors
UNITS/BOX 2000
1.55 0.05
1.75 0.1
22537-1
Document Number: 83606 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishays knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customers responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customers technical experts. Product specifications do not expand or otherwise modify Vishays terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 02-Oct-12