Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Element mandrel design on the VTA packers provides a positive means of locking the upper components to the slips. (The element mandrel allows for the full setting force to be applied to the elements and slips during setting operations. If milling operations are required, the upper components will not spin.)
VTA Packer
HAL5991
VBA Packer
Lower anchor lug allows torque to be transmitted through the packer during running and pulling operations. Bi-directional case-carburized slips or a barrel slip hold the packer securely against well pressures in all casing grades (including P110 and harder), from above and below. Case-carburized slips or a barrel slip hold the packer securely against well pressures in all casing grades (including P110 and harder), from above and below. Location of the slips beneath the elements simplifies releasing and retrieval. Debris is kept off the slips. A flow-isolated, c-ring release mechanism locks the packer in the set position until located and unlatched by the retrieving tool. Pushing through tight spots is safer than with traditional collet-release mechanisms. Designed for simple release and retrieval Versa-Trieve packers are available with the following top sub configurations: Versa-Latch assembly upper sealbore assembly (VSA, VBS) Threaded bottom subs are available for running gravel pack flow subs, sealbore extensions, or tubing tailpipe of varying types and sizes. The alphabetic character at the end of the packer number denotes the thread type. -Z: no bottom sub -M: closing sleeve thread -L: flow sub thread -T: sealbore thread
HAL10853
HAL6025
Bottom Sub