Sei sulla pagina 1di 5

Department of Electrical Engineering Swedish College of Engineering & Technology, Wah Cantt, Pakistan.

Basic Mechanical Engineering -Final Exam, March 2014


Notes: 1. Overwriting and cutting is not allowed 2. No negative marking 3. Solve on the same paper

Objective Paper
Question 1. Time: 90 minutes Question 1: Part A: MCQS Circle the correct answer: 1. Toothed wheel is called ___________________ a) Gear b) pulley c) screw d) bicycle pealed 20 Marks 75 Marks

2. Gears are type of _____________ wheel. a) Friction wheel b)smooth c) pulley

3. Beams are primarily designed for __________&_________. a) Bending & shear b) torque & moment c) force and power

4. _________ measure of the magnitude of the internal forces acting between particles of the member resulting from external forces. a) Strain b) force c) pressure d) stress

5. A belt is a __________ of flexible material, used to mechanically link two or more rotating shafts. a) Straight strip b) hexagonal strip c) random strip d)looped strip

6. Axil strain is denoted by _______________.

a)

b)

c)

d)

d)none of them

7. Pulleys works on the principal similar to the _________. a) Screw Jack b) beam c) leaver

8. Pulleys are used to transmit the___________& ______________. a) Displacement and velocity none of them b) torque, velocity c)motion , force d)

9. Speed limit for belts is ______________. a) 40 km/h b)35km/h c)35m/s d)there is no speed limit

10. For accurate motion ____________ type of belt is used. a) Timing belt b) v belt c) straight belts

B. Identify the true & False

20 Marks

1. Operating temperatures for belts are usually restricted to 31 to 185F (35 to 85C). T/ F 2. Super are used in transmitting torque between parallel shafts. T/ F 3. Belts can be used for parallel shafts. T/ F 4. Gear and sprockets are similar except the thickness. T/ F

5. Strain is change in size or shape of a material caused by the application of external forces. T/ F 6. Spur gear and bevel gears are the same type of gears. T/ F 7. `cantilever beam has one end fixed T/ F 8. Attock Railway Bridge is a Truss T/ F 9. In all materials, stress is directly related to strain. T/ F 10. In wheat Thrasher contains at least on cross belt. T/ F

Part C: Short Questions: 1. Write the names of the types of belt shown in figure.

35 Marks

2. What is compound shaft?

3. .write the name of types of keys

4. Write the name of keys

5. What are splines?

6. Find mechanical advantage:

Department of Electrical Engineering Swedish College of Engineering & Technology, Wah Cantt, Pakistan.

Basic Mechanical Engineering -Final Exam, March 2014


Notes: 1. Closed books and closed notes Exam. 2. Read the question paper carefully. 3. If doubt exists as to the interpretation of nay question, student is urged to submit the answer with paper, a clear statement of any assumption made. 4. To the point answers will be appreciated. 5. Simple scientific calculators are allowed 6. Dont write anything on question paper, except your Roll NO. 7. Any misconduct during exam will be lead to cancelation of exam. 8. No external formula sheet allowed.

__________________________________________________
Theory Part

Time Allowed: 30 Minutes

Max Marks: 25

Question #2 Determine the rcsu1tant moment of the four forces acting on the rod shown in Fig. about point O :

Potrebbero piacerti anche