Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
50
299
HL System solutions
Barrier-free showers
DN50
15
164
133
Cleaning
Cleaning
38
Cleaning
39
Tiles
Tile glue
Sealing tape
Sealing tape
Waterproofing
Floor screed Sound absorbing leg HL50F.0 Drain Impact noise insulation Concrete floor
Underlay element HL523U or (light) concrete Shower board Sealing tape Insulating tape
Tiles Tile glue Waterproofing Sealing tape Insulating tape Floor screed Impact noise insulation Concrete floor
HL530 Drain
HL052... Frame
40
7.
Apply the sealing tape and the under-tile waterproofing compound on the floor / wall, apply under-tile waterproofing on the whole shower surface
2a. + 2b.
Level floor, set shower block to the wall, eventually cut in length
8.
Set tiles right to the edge of the lot cover
3.
Apply 2-component foam (not expanding) or tile glue
9.
Remove the frame, fill in tile glue or silicone in the corners
4.
Fix and level showerblock on the floor/wall, connect the outlet to the drainage pipe
10.
Press the adjustable (7-17mm) distance frame into the tile glue (or silicone), untill the level of the surrounding tiles is reached
5.
Set the frame with lot cover into the drain, care for sound insulation of the drainage pipe
11.
Cut out the tile in the right size and stick into the tile frame (with silicone). ATTENTION: keep tiles in reserve!
6.
Insert the insulation material against impact sound, create an incline of min. 1.5% to the edge of the shower block, wait, till the concrete is dry and solid.
12.
Fill silicone into the gap between showerblock and floor screed and between frame and tiles
41
50
HL050.1E
HL050.5EN
LX - 100
LX
LY
HL050.0EN
50
DN50
DN50
Including
HL-No. 50F.0/60 50F.0/70 50F.0/80 50F.0/90 50F.0/100 50F.0/110 50F.0/120 50F.0/130 50F.0/140 50F.0/150 50F.0/160 50F.0/170 50F.0/180 50F.0/190 50F.0/200 50F.0/210
Material Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel
Dimension DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50
lenght LX 600 mm 700 mm 800 mm 900 mm 1000 mm 1100 mm 1200 mm 1300 mm 1400 mm 1500 mm 1600 mm 1700 mm 1800 mm 1900 mm 2000 mm 2100 mm
lenght LY Capacity Weight 0,8 l/s 0,8 l/s 0,8 l/s 0,8 l/s 0,8 l/s 0,8 l/s 0,8 l/s 0,8 l/s 1,4 l/s 1,4 l/s 1,4 l/s 1,4 l/s 1,4 l/s 1,4 l/s 1,4 l/s 1,4 l/s 2261 g 2488 g 2729 g 2937 g 3224 g 3525 g 3760 g 3966 g 5840 g 6120 g 6260 g 6600 g 6820 g 7060 g 7240 g 7560 g
EAN +024599 +024612 +024636 +024650 +024674 +024698 +024711 +024735 +030545 +030569 +030583 +030606 +030620 +030644 +030668 +030682
Piece/ package 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
EANmultiple
HL50FF.0 Shower channel made of stainless steel, installation in the surface (flat version), HEIGhT 90 MM!
Data
Capacity Material Outlet dimension Height Height of seal water
57,5
30
DN50
90-128
90
600 1300 mm lenght = 0,7 l/s 1400 2100 mm lenght = 1,2 l/s
LX LX -100
HL050.1E
155
HL050.11E
HL050.10E
To be continued on next page
42
LX
57,5 30 DN50 90
LY
Including
HL-No. HL50FF.0/60 HL50FF.0/70 HL50FF.0/80 HL50FF.0/90 HL50FF.0/100 HL50FF.0/110 HL50FF.0/120 HL50FF.0/130 HL50FF.0/140 HL50FF.0/150 HL50FF.0/160 HL50FF.0/170 HL50FF.0/180 HL50FF.0/190 HL50FF.0/200 HL50FF.0/210
Material Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel
Dimension lenght LX DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 600 mm 700 mm 800 mm 900 mm 1000 mm 1100 mm 1200 mm 1300 mm 1400 mm 1500 mm 1600 mm 1700 mm 1800 mm 1900 mm 2000 mm 2100 mm
155
lenght LY
90-128
LX - 100
Capacity Weight 0,7 l/s 0,7 l/s 0,7 l/s 0,7 l/s 0,7 l/s 0,7 l/s 0,7 l/s 0,7 l/s 1,2 l/s 1,2 l/s 1,2 l/s 1,2 l/s 1,2 l/s 1,2 l/s 1,2 l/s 1,2 l/s 2261 g 2488 g 2729 g 2937 g 3224 g 3525 g 3760 g 3966 g 5840 g 6120 g 6260 g 6600 g 6820 g 7060 g 7240 g 7560 g
EAN +029761 +029778 +029785 +029792 +029808 +029815 +029822 +3966 g +033362 +033379 +033386 +033393 +033409 +033416 +033423 +033430
HL50FU.0 Shower channel made of stainless steel, installation in the surface (extra flat), HEIGhT 68 MM!
Data
Capacity Material Outlet dimension Height Standard Height of seal water Additional information 600 - 1300 mm length = 0,46 l/s 1400 - 2100 mm length = 0,82 l/s Stainless steel 1.4301/PP DN50 68 mm EN 1253 24 mm Removable stench trap, with 5 cm surrounding sand coated flange for a save connection to the unter-tile waterproofing. The frameless design makes it possible, to choose border bars, fitting to the tiles and enables under-tile leakage water, to flow into the trap.
LX LX - 100 LY
24
NE
155
W
HL050.13E
LX - 100
LX
HL050.1E
24
HL050.12E
155
43
HL50FU.0/60 HL50FU.0/70 HL50FU.0/80 HL50FU.0/90 HL50FU.0/100 HL50FU.0/110 HL50FU.0/120 HL50FU.0/130 HL50FU.0/140 HL50FU.0/150 HL50FU.0/160 HL50FU.0/170 HL50FU.0/180 HL50FU.0/190 HL50FU.0/200 HL50FU.0/210
Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel
DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50
600 mm 700 mm 800 mm 900 mm 1000 mm 1100 mm 1200 mm 1300 mm 1400 mm 1500 mm 1600 mm 1700 mm 1800 mm 1900 mm 2000 mm 2100 mm
0,46 l/s 0,46 l/s 0,46 l/s 0,46 l/s 0,46 l/s 0,46 l/s 0,46 l/s 0,46 l/s 0,82 l/s 0,82 l/s 0,82 l/s 0,82 l/s 0,82 l/s 0,82 l/s 0,82 l/s 0,82 l/s
2261 g 2488 g 2729 g 2937 g 3224 g 3525 g 3760 g 3966 g 5840 g 6120 g 6260 g 6600 g 6820 g 7060 g 7240 g 7560 g
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
EANmultiple
HL50W.0 Shower channel made of stainless steel, installation wall-side, HEIGhT 110 MM!
Data
Capacity Material Outlet dimension Height Standard Height of seal water Additional information 600 1300 mm lenght = 0,8 l/s 1400 2100 mm lenght = 1,4 l/s Stainless steel 1.4301/PP DN50 with ball-joint 110 mm EN 1253 50 mm removable stench trap, with 5cm surrounding sand-coated flange for a save connection to the under-tile waterproofing. The frameless design makes it possible, to choose border bars, fitting to the tiles and enables under-tile leakage water, to flow into the trap. Sound absorbing height adjustable levelling legs, 2 pieces of edge trim jigs, 2 pieces of tiling gauges
124 50 77,5 110
DN50 50
LX LX -100
50
124 77,5 110 46
HL050.5EN
110-128
HL050.4E
DN50
Including
HL050.0EN
HL050.1E
110-128
HL-No. 50W.0/60 50W.0/70 50W.0/80 50W.0/90 50W.0/100 50W.0/110 50W.0/120 50W.0/130 50W.0/140 50W.0/150 50W.0/160 50W.0/170 50W.0/180 50W.0/190 50W.0/200
Material Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel
Dimension lenght LX DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 600 mm 700 mm 800 mm 900 mm 1000 mm 1100 mm 1200 mm 1300 mm 1400 mm 1500 mm 1600 mm 1700 mm 1800 mm 1900 mm 2000 mm 2100 mm
lenght LY
Capacity 0,8 l/s 0,8 l/s 0,8 l/s 0,8 l/s 0,8 l/s 0,8 l/s 0,8 l/s 0,8 l/s
Weight 2409 g 2655 g 2965 g 3248 g 3462 g 3769 g 4082 g 4283 g 6200 g 6480 g 6780 g 6960 g 7200 g 7450 g 7920 g 8020 g
EAN +024759 +024773 +024797 +024810 +024834 +024858 +024872 +024896 +030385 +030408 +030422 +030446 +030460 +030484 +030507 +030521
Piece/ package 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
EANmultiple
1,4 l/s 1,4 l/s 1,4 l/s 1,4 l/s 1,4 l/s 1,4 l/s 1,4 l/s 1,4 l/s
44
50W.0/210
HL50WF.0 Shower channel made of stainless steel, installation wall-side (flat version), HEIGhT 90 MM!
Data
Capacity Material Outlet dimension Height Height of seal water Additional information 600 1300 mm lenght = 0,7 l/s 1400 2100 mm lenght = 1,2 l/s Stainless steel 1.4301/PP DN50 with ball-joint 90 mm
LX LX -100 30
HL050.8E 2x HL050.2E
LX - 100 LX LY
30 mm removable stench trap, with angled bar at the back, 5cm surrounding sand-coated flange for a save connection to the under-tile waterproofing. The frameless design makes it possible, to choose border bars, fitting to the tiles and enables under-tile leakage water, to flow into the trap. Sound absorbing height adjustable levelling legs, butyle tape for a waterproof connection to the wall, tape for sound disconnection, 2 pieces of edge trim jigs, 2 pieces of tiling gauges
DN50
30
124
57,5 90
46
HL050.1E
HL050.11E
HL050.4E
Including
DN50
HL050.10E
90-128
HL050.1E
124
50 57,5 90
90-128
HL-No. HL50WF.0/60 HL50WF.0/70 HL50WF.0/80 HL50WF.0/90 HL50WF.0/100 HL50WF.0/110 HL50WF.0/120 HL50WF.0/130 HL50WF.0/140 HL50WF.0/150 HL50WF.0/160 HL50WF.0/170 HL50WF.0/180 HL50WF.0/190 HL50WF.0/200 HL50WF.0/210
Material Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel
Dimension DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50
lenght LX 600 mm 700 mm 800 mm 900 mm 1000 mm 1100 mm 1200 mm 1300 mm 1400 mm 1500 mm 1600 mm 1700 mm 1800 mm 1900 mm 2000 mm 2100 mm
lenght LY
Capacity 0,7 l/s 0,7 l/s 0,7 l/s 0,7 l/s 0,7 l/s 0,7 l/s 0,7 l/s 0,7 l/s 1,2 l/s 1,2 l/s 1,2 l/s 1,2 l/s 1,2 l/s 1,2 l/s 1,2 l/s 1,2 l/s
Weight
Piece/ EANpackage multiple 2409 g +029716 1 2655 g 2965 g 3248 g 3462 g 3769 g 4082 g 4283 g 6200 g 6480 g 6780 g 6960 g 7200 g 7450 g 7920 g 8020 g +029723 +029587 +029594 +029730 +029747 +029754 +029709 +033447 +033454 +033461 +033478 +033485 +033492 +033508 +033515 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
EAN
45
HL50WU.0 Shower channel made of stainless steel, installation wall-side (extra flat), HEIGhT 68 MM!
Data
Capacity Material Outlet dimension Height Height of seal water Additional information 600 - 1300 mm length = 0,46 l/s 1400 - 2100 mm length = 0,82 l/s Stainless steel 1.4301/PP DN50 68 mm 24 mm Removable stench trap, with 5cm surrounding sand coated flange and angled bar at the back for a save connection to the unter-tile waterproofing. The frameless design makes it possible, to choose border bars, fitting to the tiles and enables under-tile leakage water, to flow into the trap. Sound absorbing height adjustable levelling legs, butyle tape for a waterproof connection to the wall, tape for sound disconnestion, 2 pieces of edge trim jigs, 2 pieces of tiling gauges.
24 LX - 100
A
NE
W
HL050.8E
LX
2 Stk. HL050.2E
LX - 100 LY LX
24
46
124
HL050.13E
HL050.4E
Including
HL050.12E
50
HL050.1E
HL-No.
HL50WU.0/60 HL50WU.0/70 HL50WU.0/80 HL50WU.0/90 HL50WU.0/100 HL50WU.0/110 HL50WU.0/120 HL50WU.0/130 HL50WU.0/140 HL50WU.0/150 HL50WU.0/160 HL50WU.0/170 HL50WU.0/180 HL50WU.0/190 HL50WU.0/200 HL50WU.0/210
Material Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel
Dimension
DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50
Weight
2409 g 2655 g 2965 g 3248 g 3462 g 3769 g 4082 g 4283 g 6200 g 6480 g 6780 g 6960 g 7200 g 7450 g 7920 g 8020 g
EAN
+034086 +034093 +034109 +034116 +034123 +034130 +034147 +034154 +034161 +034178 +034185 +034192 +034208 +034215 +034222 +034239
46
HL050S Cover plate Standard, made of stainless steel - for shower channels
Data
Material Height Load classification Stainless steel 1.4301 Usage for floorings from 2 16 mm including tile glue K3 (300 kg) HL-No. 050S/60 050S/70 050S/80 050S/90 050S/100 050S/110 050S/120 050S/130 050S/140 050S/150 050S/160 050S/170 050S/180 050S/190 050S/200 050S/210 Material Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel lenght LX -100 600 mm 700 mm 800 mm 900 mm 1000 mm 1100 mm 1200 mm 1300 mm 1400 mm 1500 mm 1600 mm 1700 mm 1800 mm 1900 mm 2000 mm 2100 mm Weight 410 g 490 g 583 g 672 g 746 g 830 g 900 g 992 g 1074 g 1156 g 1238 g 1320 g 1402 g 1484 g 1566 g 1648 g EAN +024919 +024933 +024957 +024971 +024995 +025015 +025039 +025053 +029891 +029914 +029938 +029952 +029976 +029990 +030026 +030040 Piece/package 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EAN-multiple
18 40 LX -100
HL050D Cover plate Design, made of stainless steel - for shower channels
Data
Material Height Load classification Stainless steel 1.4301 brushed finish Usage for floorings from 5 19 mm including tile glue K3 (300 kg) HL-No. 050D/60 050D/70 050D/80 050D/90 050D/100 050D/110 050D/120 050D/130 050D/140 050D/150 050D/160 050D/170 050D/180 050D/190 050D/200 050D/210 Material Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel lenght LX -100 600 mm 700 mm 800 mm 900 mm 1000 mm 1100 mm 1200 mm 1300 mm 1400 mm 1500 mm 1600 mm 1700 mm 1800 mm 1900 mm 2000 mm 2100 mm Weight 872 g 1041 g 1260 g 1395 g 1550 g 1757 g 1954 g 2116 g 2322 g 2528 g 2734 g 2940 g 3146 g 3352 g 3558 g 3764 g EAN +025077 +025091 +025114 +025138 +025152 +025176 +025190 +025213 +603007 +603009 +603011 +603013 +603015 +603017 +603019 +603021 Piece/package EAN-multiple 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
18 40 LX -100 3
47
HL050I Cover plate Individuell, made of stainless steel - for shower channels
Data
Material Height Load classification Additional information Stainless steel 1.4301 brushed finish Usage for floorings from 16 30 mm including tile glue K3 (300 kg) with recess for customers indivudual floor finish HL-No. 050I/60 050I/70 050I/80 050I/90 050I/100 050I/110 050I/120 050I/130 050I/140 050I/150 050I/160 050I/170 050I/180 050I/190 050I/200 050I/210 Material Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel lenght LX -100 600 mm 700 mm 800 mm 900 mm 1000 mm 1100 mm 1200 mm 1300 mm 1400 mm 1500 mm 1600 mm 1700 mm 1800 mm 1900 mm 2000 mm 2100 mm Weight 766 g 914 g 1060 g 1213 g 1412 g 1488 g 1723 g 1855 g 2003 g 2151 g 2299 g 2447 g 2595 g 2743 g 2891 g 3039 g EAN +025237 +025251 +025275 +025299 +025312 +025336 +025350 +025374 +030224 +030248 +030262 +030286 +030309 +030323 +030347 +030361 Piece/package 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EAN-multiple
18 40 11,5 LX -100
EAN-multiple
48
HL0520.0E
900 x900 (1200x1200) 121 x121
8 -18
115 x115
20
85
R 70 100 195
Outlet dimension
DN50
HL0523.0E
HL-No. 523N-80 x 80 523N-90 x 80 523N-90 x 90 523N-100 x 80 523N-100 x 90 523N-100 x 100 523N-110 x 80 523N-110 x 90 523N-110 x 100 523N-110 x 110 523N-120 x 80 523N-120 x 90 523N-120 x 100 523N-120 x 110 523N-120 x 120 523N-130 x 80 523N-130 x 90 523N-130 x 100 523N-130 x 110 523N-130 x 120 523N-130 x 130 523N-140 x 80 523N-140 x 85
Material PP/PE, EPS 100 PP/PE, EPS 100 PP/PE, EPS 100 PP/PE, EPS 100 PP/PE, EPS 100 PP/PE, EPS 100 PP/PE, EPS 100 PP/PE, EPS 100 PP/PE, EPS 100 PP/PE, EPS 100 PP/PE, EPS 100 PP/PE, EPS 100 PP/PE, EPS 100 PP/PE, EPS 100 PP/PE, EPS 100 PP/PE, EPS 100 PP/PE, EPS 100 PP/PE, EPS 100 PP/PE, EPS 100 PP/PE, EPS 100 PP/PE, EPS 100 PP/PE, EPS 100 PP/PE, EPS 100
Dimension DN50 / 80 x 80 cm DN50 / 90 x 80 cm DN50 / 90 x 90 cm DN50 / 100 x 80 cm DN50 / 100 x 90 cm DN50 / 100 x 100 cm DN50 / 110 x 80 cm DN50 / 110 x 90 cm DN50 / 110 x 100 cm DN50 / 110 x 110 cm DN50 / 120 x 80 cm DN50 / 120 x 90 cm DN50 / 120 x 100 cm DN50 / 120 x 110 cm DN50 / 120 x 120 cm DN50 / 130 x 80 cm DN50 / 130 x 90 cm DN50 / 130 x 100 cm DN50 / 130 x 110 cm DN50 / 130 x 120 cm DN50 / 130 x 130 cm DN50 / 140 x 80 cm DN50 / 140 x 85 cm
EAN +027224 +027248 +025947 +026425 +026449 +026401 +026500 +026524 +026463 +026487 +026586 +026609 +026548 +026562 +025961 +026708 +026722 +026623 +026647 +026661 +026685 +026821 +026845
Piece/ package 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
HL-No.
Material
Dimension DN50 / 140 x 90 cm DN50 / 140 x 100 cm DN50 / 140 x 110 cm DN50 / 140 x 120 cm DN50 / 140 x 140 cm DN50 / 150 x 80 cm DN50 / 150 x 90 cm DN50 / 150 x 100 cm DN50 / 150 x 110 cm DN50 / 150 x 120 cm DN50 / 150 x 130 cm DN50 / 150 x 140 cm DN50 / 150 x 150 cm DN50 / 150 x 80 cm DN50 / 160 x 80 cm DN50 / 160 x 90 cm DN50 / 160 x 100 cm DN50 / 160 x 110 cm DN50 / 160 x 120 cm DN50 / 160 x 130 cm DN50 / 160 x 140 cm DN50 / 160 x 150 cm
EAN +026869 +026746 +026760 +026784 +026807 +027002 +027026 +026883 +026906 +026920 +026944 +026968 +026982 +027002 +027163 +027187 +027040 +027064 +027088 +027101 +027125 +027262
523N-140 x 90 PP/PE, EPS 100 523N-140 x 100 PP/PE, EPS 100 523N-140 x 110 PP/PE, EPS 100 523N-140 x 120 PP/PE, EPS 100 523N-140 x 140 PP/PE, EPS 100 523N-150 x 80 PP/PE, EPS 100 523N-150 x 90 PP/PE, EPS 100 523N-150 x 100 PP/PE, EPS 100 523N-150 x 110 PP/PE, EPS 100 523N-150 x 120 PP/PE, EPS 100 523N-150 x 130 PP/PE, EPS 100 523N-150 x 140 PP/PE, EPS 100 523N-150 x 150 PP/PE, EPS 100 523N-150 x 80 PP/PE, EPS 100 523N-160 x 80 PP/PE, EPS 100 523N-160 x 90 PP/PE, EPS 100 523N-160 x 100 PP/PE, EPS 100 523N-160 x 110 PP/PE, EPS 100 523N-160 x 120 PP/PE, EPS 100 523N-160 x 130 PP/PE, EPS 100 523N-160 x 140 PP/PE, EPS 100 523N-160 x 150 PP/PE, EPS 100 Special sizes on request!
Piece/ package 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
HL3120
HL3122
HL3124
Quadra
HL3121
Loire
HL3123
Nil
HL3125
Seine
HL-No. 3120 3121 3122 3123 3124 3125 Material Stainless steel V4A Stainless steel V4A Stainless steel V4A Stainless steel V4A Stainless steel V4A Stainless steel V4A Dimension 115 x 115 x 5 mm 115 x 115 x 5 mm 115 x 115 x 5 mm 115 x 115 x 5 mm 115 x 115 x 5 mm 115 x 115 x 5 mm
Orinoco
Weight 430 g 420 g 420 g 420 g 420 g 420 g EAN +015412 +015429 +015436 +015443 +015450 +015467
Yukon
Piece/package 1 1 1 1 1 1 EAN-multiple
49
Piece/package EAN-multiple 1 1
Frame grey
HL530F (.0) Shower block complete, installation wall-side (flat version), hEIGhT 85 MM!
Capacity Material Grate Outlet dimension Standard Height of seal water Additional information Including
0,6 l/s PP/ABS/EPS-40 Frame 150 x 150 mm, adjustable in height from 7-17mm, tile frame DN50 EN 1253 30mm with trap PRIMUS, no stench with our without water The exact adjustment to the right length is made on the construction site by simply cuutting with a saw Lot cover
NE
Data
HL0530.G
HL0530F.2E
150x15 0
202
58
256
20
HL0530F.1E
85
1200 DN50
85
Frame grey
50
HL0530.G, (.B), (.C), (.S), (.W) Visible parts fitting to HL530.0 and HL530F.0
Data
Material Grate ABS Frame 150 x 150 mm, inner dimension of the tile frame: 124 x 124 x 7 mm HL-No. 0530.G 0530.B 0530.C 0530.S 0530.W Material ABS ABS ABS verchromt ABS ABS Frame grey brown chrome-plated black white Weight 200 g 200 g 200 g 200 g 200 g EAN +029198 +029211 +029235 +029259 +029273 Piece/package EAN-multiple 1 1 1 1 1
HL0530.G
HL0530.B
HL0530.C
HL0530.S
HL0530.W
HL0530.GG, (.BG), (.SG), (.WG) Frames with glass insert for HL530.0 and HL530F.0
Data
Material Grate ABS/Glass Frame 150 x 150 mm, inner dimension of the tile frame: 124 x 124 x 6 mm HL-No. 0530.GG 0530.BG 0530.SG 0530.WG Material ABS/Glass ABS/Glass ABS/Glass ABS/Glass Frame grey brown black white Weight 449 g 449 g 449 g 449 g EAN +029648 +029624 +029662 +029686 Piece/package EAN-multiple 1 1 1 1
HL0530.GG
HL0530.BG
HL0530.SG
HL0530.WG
115
20
Dimension 300 x 256 x 115 mm 600 x 256 x 115 mm 1200 x 256 x 115 mm
59
202
Piece/package EAN-multiple 1 1 1
NE
20 85
58
202
Piece/package EAN-multiple 1 1 1
51
HL531 Shower channel Primus-Line with EPS installation block, stainless steel frame and cover
Data
Description Shower channel, integrated in an EPS-installation block with stainless steel frame and cover. Surface fleece laminated. For installation close to the wall. 0,55 l/s PP/ABS/EPS-40/stainless steel Stainless steel frame 492 x 62 mm, cover 480 x 50 mm PRIMUS-trap, no stench without water! The exact adjustment to the right length is made by cutting directly on the construction site. Length from 600mm to 1200mm with possibility to elongate with HL531V. Width 200mm, height 79mm incl. 3% incline to the wall. For wall tiles up to 17mm and floor tiles up to 13mm (incl. tile glue). Also available on request with higher frame, e.g. for natural stones.
73
87
5- 17
NE
3%
13
Ausbruch
50
200
498 DN 50
79
79
HL0531.0E
1200 0 - min. 60
DN50
HL0531S HL0531.1E
Dimension Cover Weight 1200 x 200 Stainless steel brushed x 79 mm 1200 x 200 x without 79 mm
EAN
Piece/Package EAN-multiple 1 1
HL0531S Standard cover for HL531.0 HL0531D Design cover for HL531.0
Data
25,5
HL0531S
NE
50
480
HL0531D
22,5 50 480 3
Weight
EAN
Piece/Package EAN-multiple 1 1
52
NE
73
200
3%
79
HL-No. 531V-60
Material EPS-40
Weight
EAN
Piece/package 1
EAN-multiple
33
71,5
108
50
Including
HL-No. 52K
15
164
133
HL050.5E
EAN +028290
Piece/package EAN-multiple 1
HL052.1-300 x 100
HL052.2-300 x 100
HL052.3-300 x 100
HL052.4-300 x 100
Material Stainless steel brushed Stainless steel polished Stainless steel matt black Antique bronze
53
HL3000.1 HL510NCK
HL0510.7EKK HL0510NC.1E
10
Including
DN40
Sound-absorbing levelling legs for adjustment in height, lot cover and supporting frame
95 35
DN50
65
HL0510NC.2E HL-No. 510NC Material Polymere concrete/steel mesh/PP Dimension DN40/50 Weight 4350 g EAN +021338 Piece/package 1 EAN-multiple
54