Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
SET 12
Drive technology
Control and speed-dependent drive tasks using the LOGO! logic module and MICROMASTER 410 inverter
Micro Automation Sets ready-torun combinations from the Siemens automation environment. Quickly implemented automation tasks at a favorable price in the world of micro automation simple, low-cost and pre-tested in working applications.
Simply smart LOGO! automatically controls the speed of motors - more functionality for the same price. Speed can be continuously varied for the price of switching on and off. User-friendliness included drive tasks are smartly and directly coupled with sensors and control functions. Not only this, applications or changes are simply handled using the functions integrated in LOGO! the contactor functionality so-to-speak is included Direct all of the functions are directly and simply parameterized at the device or using a PC Crystal clear messages are directly displayed on the LOGO! for absolute transparency in the application Embark on a new course with Siemens all of the data and the right contact partners for the Set, straightforward ordering or planning with different versions, immediately, directly and simply through www.siemens.com/microset the fastest way to a working solution.
LOGO!Power
LOGO!
MICROMASTER 410
1 LOGO!Power: Regulated power supply for LOGO! 2 LOGO!: Generates speed setpoints, displays operating statuses and messages,
intelligently controls the actuators, operator interface
Applications Transport systems: Conveyor belts, hoisting devices Building technology: Gate and roller door control, fan control, pump control Machine control: Material feeding equipment, bakery machines, vacuum systems, mixing machines
LOGO!Power primary switched power supply Input voltage Line frequency range Output voltage/current Rated voltage 120...230 V AC, Voltage range 85...264 V AC 47...63 Hz 24V/1.3A (additional versions: 24 V/2.5 A; 12 V/1.9 A; 12 V/4.5 A; 5 V/3 A; 5 V/6.3 A; 15 V/1.85 A; 15 V/4 A available)
LOGO! Logic module Input voltage Digital inputs/outputs Analog inputs 12 V DC, 24 V AC/DC, 115/230 V AC/DC 8 DI/4 DO (relay) can be expanded up to 24 DI/16 DO 2 AI, range 0...10 V, can be expanded up to 8 AI
MICROMASTER 410 inverter Input voltage Rated motor output Protective functions Serial interfaces Inputs and outputs 1-ph. 100120 V AC or 200240 V AC 0.12 to 0.75 kW > V, < V, ground fault/short-circuit protection, stall protection, motor > T, inverter > T RS-485, Option RS-232; for parameterization and communication Analog and digital (integrated)
1 2 3 4
MICROMASTER 410 inverter Three-phase asynchronous motors Accessories Operator Panel for MICROMASTER (optional) Configuring software/tools LOGO! SoftComfort V3.1 LOGO! PC cable MICROMASTER PC-based commissioning tool (optional) MICROMASTER PC inverter connection kit (optional) Your contact for the MICRO AUTOMATION SET For further information please contact your local Siemens partner , or local Siemens distributor. If you do not know your Siemens partner please contact the helpline.
Your MICRO AUTOMATION SET in the Internet Contact partners, ordering data, and version information, as well as additional information and examples are provided under:
www.siemens.com/microset
Recommended by