Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
ChemSeal is a true Chemineer mixer seal designed for demanding top entry agitator applications. Available in either single or double configurations, the ChemSeal provides leading-class seal performance and safety.
Customer Benefits
Superior Performance
ChemSeal is designed specifically for agitator duties where shaft movements are larger, speeds are slower and conditions more variable than those encountered by pump seals Balanced seal design reduces seal face wear rate and increases the pressure capability by reducing the seal contact pressure as the process pressure fluctuates Dual sleeve-to-shaft O-rings with heavy cross sections make the seals more tolerant of shaft deflections inherent in agitator applications
Permanently installed above the tank drop collar design securely holds shaft during seal change and improves operator safety by eliminating on the fly installation of shaft support, prevents the shaft from falling into the vessel, and eliminates the need for vessel entry or overhead cranes to support the shaft
Application Versatility
Bi-directional rotation enhances process and operational flexibility Designed for a wide range of agitator models to allow ChemSeal to be the common plant standard Throttle Bushing option is available for clean flush below seal Debris Well option available to eliminate process contamination
Throttle Bushing
Debris Well
Product Specifications
Sealing Configurations
Dry running pressure balanced single seal Lubricated fully pressure balanced double seal Multi-spring rotary pusher seal typical of all seals Optional O-ring materials - Kalrez (6375) - EPR, Aflas - A variety of others Special metal materials available
Lubrication
1/4" NPT ports provided for lubrication Recommended API Plans: Plan 53 and 54 Supported API Plans: Plan 51, 52, 53, 54 and 62 Re-circulating gas panels or dead end gas pressure for dry running single seals Barrier pressure to be set 30 to 60 psi (2 to 4 bar) above product pressure for ideal operation
Material Selection
Standard stocked materials - Carbon Rotating Head - Silicon Carbide Stationary Seat - Viton O-Rings - 316SS Metal Parts Optional face combinations - Soft versus Hard: Carbon/Tungsten Carbide - Hard versus Hard: Tungsten Carbide/ Tungsten Carbide Tungsten Carbide/ Silicon Carbide Silicon Carbide/ Silicon Carbide
Technical Data
Angular Misalignment: Up to 1/10th of a degree Mechanical Face Loading: 30 psig (2 bar) Factory Set
Chemineer, Inc. 5870 Poe Avenue Dayton, Ohio 45414 Telephone: (937) 454-3200 Email: chemineer@nov.com Chemineer, Ltd. 7 Cranmer Road, West Meadows Derby DE21 6XT, England Telephone: 44-1-332-546700 Email: chemineeruk@nov.com
Chemineer China Room 2006, Modern Plaza 369 Xianxia Road Shanghai 200336 China Telephone: 86-21-61240001 Email: chemineercn@nov.com
Chemineer, Inc. 125 Flagship Drive North Andover, MA 01845 Telephone: (978) 687-0101 Email: navinfo@nov.com www.kenics.com www.greercomixers.com
1-800-643-0641 www.chemineer.com
National Oilwell Varco has produced this brochure for general information only, and it is not intended for design purposes. Although every effort has been made to maintain the accuracy and reliability of its contents, National Oilwell Varco in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of information and data herein. All applications for the material described are at the users risk and are the users responsibility. All brands listed are trademarks of National Oilwell Varco.
2013 by Chemineer, Inc. Printed in U.S.A. 1013