Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Since 1978, Seasafe Fiberglass Cable Tray Systems have been tested and proven in the
harsh environment of the offshore oil and gas industry. Subject to the corrosive
conditions inherent in petroleum products, plus the daily punishment of exposure to
wind, weather and saltwater Seasafe Cable Tray has stood up!
Seasafe Cable Tray gives you the load capacity of steel plus the inherent characteristics afforded by
our in-house Pultrusion Technology: non-conductive, non-magnetic and corrosion-resistant. Although
light in weight, their strength-to-weight ratio surpasses that of equivalent steel products. Seasafe Cable
Tray will not rust, nor do they ever require painting. Available in both polyester and vinylester resin
systems, they are manufactured to meet ASTM E-84, Class 1 Flame Rating and self-extinguishing
requirements of ASTM D-635.
A surface veil is applied during the pultrusion process to ensure a resin-rich surface for superior
corrosion resistance as well as an ultraviolet exposure barrier. Cable Tray colors: Gray or blue
(polyester resin) and Beige (vinylester resin). Custom colors are available on request.
The NEMA loadings listed in this brochure are load-tested in accordance with NEMA and CSA
guidelines.
Horizontal
(suspended) tray,
with vertical drop to
machinery below.
Table of Contents
Technical Data
Load Data ......................................................................................2
Corrosion Guide ........................................................................3-4
Structural Characteristics of Tray ..............................................5-6
Thermal Contraction and Expansion ............................................7
Installation Guide ..........................................................................8
Suggested Specification ................................................................9
Numbering System
Straight Sections and Fittings......................................................10
6" System
Straight Sections ........................................................................11
Horizontal Bends ........................................................................12
Vertical Bends..............................................................................13
Horizontal Tees and Crosses ........................................................14
Reducing and Expanding Tees and Crosses ............................15-17
Reducers ....................................................................................18
Vertical Tees ................................................................................19
4" System
Straight Sections ........................................................................20
Horizontal Bends ........................................................................21
Vertical Bends..............................................................................22
Horizontal Tees and Crosses ........................................................23
Reducing and Expanding Tees and Crosses ............................24-26
Reducers ....................................................................................27
Vertical Tees ................................................................................28
3" System
Straight Sections ........................................................................29
Horizontal Bends ........................................................................30
Horizontal Tees ............................................................................30
Vertical Bends..............................................................................31
Horizontal Cross & Reducers ......................................................32
Vertical Tees ................................................................................33
Reducing and Expanding Crosses ................................................33
Reducing and Expanding Tees ....................................................34
Cable Channel
Channel ......................................................................................35
Channel Fittings ....................................................................35-36
Splice Plates ................................................................................36
Accessories
Splice Plates ..........................................................................37-38
Barrier Strips, Hold Downs, Sealant ............................................39
Cover ........................................................................................40
Marine Rung/Coast Guard Letter ..................................41
Strut Systems ................................................................42-49
Structural Fabrications ................................................50-53
1
Load Data
Effect of Temperature
Strength properties of reinforced plastics are reduced
when continuously exposed to elevated temperatures.
Working loads shall be reduced based on the following:
Temperature in
Approximate
Degrees F Percent of Strength
75
100
125
150
175
200
100
90
78
68
60
52
Class
Designation
Support Span
Feet
Working Load
Lbs./Linear Foot
8A
8B
8C
8
8
8
50
75
100
12A
12B
12C
12
12
12
50
75
100
16A
16B
16C
16
16
16
50
75
100
20A
20B
20C
20
20
20
50
75
100
Properties
Test
Method
Unit/
Value
Transverse
75/75
100
None
0 sec.
Transverse
Tensile Strength
ASTM D638
psi
30,000
7,000
40,000
4,500
Tensile Modulus
ASTM D638
psi x 106
2.5
.8
3.2
.6
Flexural Strength
ASTM D790
psi
30,000
10,000
40,000
10,000
Flexural Modulus
ASTM D790
psi x 106
1.6
.8
2.1
.8
Izod Impact
ASTM D256
ft-lbs/in
28
28
Compressive Strength
ASTM D695
psi
30,000
15,000
40,000
10,000
Compressive Modulus
ASTM D695
psi x 106
2.5
1.0
3.2
.7
45
45
45
45
psi
Ibs/in3
5,500
5,500
5,500
5,500
ASTM D1505
.058-.062
.072-.076
Coefficient of Thermal
Expansion
ASTM D696
in/in/F
5.0 x 10-6
5.0 x 10-6
Water Absorption
ASTM D570
Max %
0.5
0.5
Dielectic Strength
ASTM D149
V/mil (vpm)
200
200
VO
20 Max
Barcol Hardness
Shear Strength
Density
ASTM D2583
ASTM D732
Flammability
Classification
UL94
Flame Spread
ASTM E-84
The information shown in this corrosion guide is based on full immersion laboratory tests and data generated
from resin manufacturers data. It should be noted that in some of the environments listed, splashes and spill
situations may result in a more corrosive situation than indicated due to the evaporation of water. Regular wash
down is recommended in these situations.
All data represents the best available information and is believed to be correct. The data should not be
construed as a warranty of performance for that product as presented in these tables. User tests should be
performed to determine suitability of service if there is any doubt or concern. Such variables as concentration,
temperature, time and combined chemical effects of mixtures of chemicals make it impossible to specify the exact
suitability of fiber reinforced plastics in all environments. Seasafe will be happy to supply material samples for
testing. These recommendations should only be used as a guide and Seasafe does not take responsibility for
design or suitability of materials for service intended. In no event will Seasafe be liable for any consequential or
special damages for any defective material or workmanship including without limitation, labor charge, other
expense or damage to properties resulting from loss of materials or profits or increased expenses of operations.
CHEMICAL
ENVIRONMENT
POLYESTER
VINYL ESTER
CHEMICAL
ENVIRONMENT
Max Oper.
Temp *F
POLYESTER
Max
Wt. %
Max Oper.
Temp *F
VINYL ESTER
Max
Wt. %
Max Oper.
Temp *F
Max
Wt. %
Max Oper.
Temp *F
Max
Wt. %
Acetic Acid
10
190
10
210
Chromic Acid
70
10
120
Acetic Acid
50
125
50
180
Citric Acid
SAT
170
SAT
200
Acetone
N/R
N/R
100
75
Copper Chloride
SAT
170
SAT
200
Aluminum Chloride
SAT
170
SAT
200
Copper Cyanide
SAT
170
SAT
200
Aluminum Hydroxide
SAT
160
SAT
170
Copper Nitrate
SAT
170
SAT
200
Aluminum Nitrate
SAT
150
SAT
170
100
170
100
200
Aluminum Sulfate
SAT
180
SAT
200
Cyclohexane
N/R
N/R
N/R
N/R
Ammonium Chloride
SAT
170
SAT
190
Cyclohexane, Vapor
ALL
100
ALL
130
Ammonium Hydroxide
100
10
150
Diesel Fuel
100
160
100
180
Ammonium Hydroxide
28
N/R
28
100
Diethyl Ether
N/R
N/R
N/R
N/R
Ammonium Carbonate
N/R
N/R
SAT
150
Dimethyl Phthalate
N/R
N/R
N/R
N/R
15
125
SAT
130
Ethanol
50
75
50
90
Ammonium Nitrate
SAT
160
SAT
190
Ethyl Acetate
N/R
N/R
N/R
N/R
Ammonium Persulfate
SAT
N/R
SAT
150
Ethylene Chloride
N/R
N/R
N/R
N/R
Ammonium Sulfate
SAT
170
SAT
200
Ethylene Glycol
100
90
100
200
Amyl Alcohol
ALL
N/R
ALL
90
Fatty Acids
SAT
180
SAT
200
Ammonium Bicarbonate
140
120
Ferric Chloride
SAT
170
SAT
200
N/R
N/R
100
140
Ferric Nitrate
SAT
170
SAT
200
200
Ferric Sulfate
SAT
170
SAT
200
25
110
SAT
Benzoic Acid
SAT
150
SAT
200
Ferrous Chloride
SAT
170
SAT
200
Benzoyl Alcohol
100
N/R
100
N/R
Fluoboric Acid
N/R
N/R
SAT
165
Borax
SAT
170
SAT
200
Fluosilicic Acid
N/R
N/R
SAT
70
Calcium Carbonate
SAT
170
SAT
200
Formaldehyde
50
75
50
100
Calcium Chloride
SAT
170
SAT
200
Formic Acid
N/R
N/R
50
100
150
Calcium Hydroxide
Calcium Nitrate
25
70
25
165
Gasoline
100
80
100
SAT
180
SAT
200
Glucose
100
170
100
200
100
150
100
200
Calcium Sulfate
SAT
180
SAT
200
Glycerine
Carbon Disulfide
N/R
N/R
N/R
N/R
Heptane
100
110
100
200
Carbonic Acid
SAT
130
SAT
180
Hexane
100
90
100
130
200
200
Hydrobromic Acid
50
120
50
120
200
200
Hydrochloric Acid
10
150
10
200
N/R
N/R
100
75
Hydrochloric Acid
20
140
20
190
Carbon Tetrachloride
Chlorine, Dry Gas
140
170
Hydrochloric Acid
37
75
37
95
N/R
180
Hydrochloric Acid
N/R
N/R
15
80
SAT
80
SAT
180
100
190
100
200
Chlorine Water
-: No Information Available
FUM: Fumes
Technical Data
Corrosion Guide
Corrosion Guide
CHEMICAL
ENVIRONMENT
POLYESTER
VINYL ESTER
Max
Wt. %
Max Oper.
Temp *F
Max
Wt. %
Max Oper.
Temp *F
100
75
100
130
Hydrogen Chloride
120
Hydrogen Peroxide
100
30
100
170
100
Hypochlorous Acid
CHEMICAL
ENVIRONMENT
POLYESTER
VINYL ESTER
Max
Wt. %
Max Oper.
Temp *F
Max
Wt. %
Max Oper.
Temp *F
Potassium Hyroxide
N/R
N/R
25
150
200
Potassium Nitrate
SAT
170
SAT
200
100
Potassium Permanganate
100
80
100
210
100
210
Potassium Sulfate
SAT
170
SAT
200
170
100
210
Propylene Glycol
ALL
170
ALL
200
20
80
20
150
Phthalic Acid
SAT
200
Isopropyl Alcohol
N/R
N/R
15
80
Sodium Acetate
SAT
160
SAT
200
Kerosene
100
140
100
180
Sodium Benzoate
SAT
170
SAT
200
Lactic Acid
SAT
170
SAT
200
Sodium Bicarbonate
SAT
160
SAT
175
Lead Acetate
SAT
170
SAT
200
Sodium Bisulfate
ALL
170
ALL
200
Lead Chloride
SAT
140
SAT
200
Sodium Bromide
ALL
170
ALL
200
Lead Nitrate
SAT
SAT
200
Sodium Carbonate
10
80
35
160
Linseed Oil
100
150
100
190
Sodium Chloride
SAT
170
SAT
200
Lithium Chloride
SAT
150
SAT
190
Sodium Cyanide
SAT
170
SAT
200
150
Magnesium Carbonate
SAT
140
SAT
170
Sodium Hydroxide
N/R
N/R
50
Magnesium Chloride
SAT
170
SAT
200
Sodium Hydroxide
N/R
N/R
25
80
Magnesium Hydroxide
SAT
150
SAT
190
Sodium Hypochloride
N/R
N/R
10
150
Magnesium Nitrate
SAT
140
SAT
180
Sodium Monophosphate
SAT
170
SAT
200
Magnesium Sulfate
SAT
170
SAT
190
Sodium Nitrate
SAT
170
SAT
200
Mercuric Chloride
SAT
150
SAT
190
Sodium Sulfate
SAT
170
SAT
200
Mercurous Chloride
SAT
140
SAT
180
Sodium Thiosulfate
ALL
100
ALL
120
N/R
N/R
N/R
N/R
Stannic Chloride
SAT
160
SAT
190
N/R
Mineral Oils
100
170
100
200
Styrene
N/R
N/R
N/R
Monochlorobenzene
N/R
N/R
N/R
N/R
Sulfated Detergent
0/50
170
0/50
200
Naphtha
100
140
100
170
Sulfur Dioxide
100
80
100
200
Nickel Chloride
SAT
170
SAT
200
Sulfur Trioxide
100
80
100
200
Nickel Nitrate
SAT
170
SAT
200
Sulfuric Acid
93
N/R
93
N/R
Nickel Sulfate
SAT
170
SAT
200
Sulfuric Acid
50
N/R
50
180
Nitric Acid
140
150
Sulfuric Acid
25
75
25
190
Nitric Acid
20
70
20
100
Sulfurous Acid
SAT
80
N/R
N/R
Oleic Acid
100
170
100
190
Tartaric Acid
SAT
170
SAT
200
Oxalic Acid
ALL
75
ALL
120
Tetrachloroethylene
N/R
N/R
FUM
75
100
120
Toluene
N/R
N/R
N/R
N/R
Perchlorethylene
100
N/R
100
N/R
Trisodium Phosphate
N/R
N/R
SAT
175
Perchloric Acid
N/R
N/R
10
150
Urea
SAT
130
SAT
140
Perchloric Acid
N/R
N/R
30
80
Vinegar
100
170
100
200
Phosphoric Acid
10
160
10
200
Water, Distilled
100
170
100
190
Phosphoric Acid
100
120
100
200
Water, Tap
100
170
100
190
SAT
170
SAT
200
Water, Sea
SAT
170
SAT
190
Potassium Bicarbonate
50
80
50
140
Xylene
N/R
N/R
N/R
N/R
Potassium Carbonate
10
N/R
10
120
Zinc Chloride
SAT
170
SAT
200
Potassium Chloride
SAT
170
SAT
200
Zinc Nitrate
SAT
170
SAT
200
Potassium Dichromate
SAT
170
SAT
200
Zinc Sulfate
SAT
170
SAT
200
-: No Information Available
FUM:
Fumes
WARNING!
Continuous Beam
Continuous beam is the beam
configuration most commly used
in cable tray installations. An
example of this configuration is
where cable trays are installed
across several supports to form a
number of spans. The
continuous beam possesses
traits of both the simple and
fixed beams.
When equal loads are applied
to all spans simultaneously, the
counterbalancing effect of the
loads on both sides of a support
restricts the movement of the
cable tray at the support. The
effect is similar to that of a fixed
beam. The end spans behave
substantially like simple beams.
When cable trays of identical
design are compared, continuous
beam installations will typically
have approximately half the
deflection of a simple beam of the
same span. Therefore, simple
beam data should be used for a
general comparison only.
Cantilever Beam
A cantilever beam
configuration occurs when one
end of the beam is rigidly
attached to the support and the
other end is unsupported. This
type of configuration is typically
used when wall mounting a
bracket to support cable tray.
Since one end is unsupported,
the cantilever beam will hold
considerably less load than a
comparable simple beam.
Do NOT Use As A
Walkway, Ladder Or
Support For Personnel.
Fixed Beam
A fixed beam configuration has
both ends of the beam rigidly
attached to the supports. A good
example of a fixed beam is the
rung of a cable tray. By
attaching the ends of the rung to
the side rails, the ends are not
free to move, bend or twist. This
restriction in end movement
effectively increases load carrying
capacity of the member.
Fixed beam configurations are
also typically found in strut rack
type support systems. These
types of racks are found
extensively in tunnel applications
for support of pipe and cable tray.
Warning! Walkways
It should be noted that cable tray is designed
as a support for power or control cables, or
both and is not intended or designed to be a
walkway for personnel, the user is urged to
display appropriate warnings cautioning
against the use of this support as a walkway.
The following language is suggested:
WARNING! Not to be used as a walkway,
ladder or support for personnel. To be
used only as a mechanical support for
cables and tubing.
Technical Data
Wind Loads
Wind loads need to be determined
for all outdoor cable tray installations.
Most outdoor cable trays are ladder
type trays, therefore the most severe
loading to be
Ice Loads
Glaze ice is the most commonly seen
form of ice build-up. It is the result of
rain or drizzle freezing on impact with
an exposed object. Generally, only the
top surface (or the cover) and the
windward side of a cable tray system is
significantly coated with ice. The
maximum design load to be added due
to ice should be determined from local
and federal weather bureau
information.
Snow Loads
Snow is measured by density and
thickness. The density of snow varies
almost as much as its thickness. The
additional design load from snowfall
should be determined using local
snowfall records which can be
obtained from local and federal
weather bureaus.
Seismic Loads
In recent years a great deal of testing
and evaluation of cable tray systems,
and their supports, has been
performed.
The conclusions reached from these
evaluations have shown the cable
tray/strut support system exhibited
more seismic capacity than originally
expected. One of the factors
contributing to this is the energy
dissipating motion of the cables within
the tray. Another factor is the high
degree of ductility of the cable tray
and the support material. These
factors, working in conjunction with a
properly designed cable tray system,
should afford reasonable assurance to
withstand even strong motion
earthquakes. Please consult the factory
with your specific seismic
specifications and request a seismic
brochure.
Splices
A lot of attention has been given to
the strength of the side rails. These
load bearing side rails must be spliced
to form a continuous system.
The location of splices in a
continuous span cable tray system is
also very important. The splices
should be located at points of
minimum stress whenever practical.
NEMA standards FG-1 limits the use
of splice plates as follows:
Unspliced straight sections should
be used on a simple span and on
end spans of continuous runs.
Straight section lengths should be
equal to or greater than the span
length to ensure not more than
one splice between supports. See
Figures 1 through 3 for examples
on splicing.
Figure 1
Maximum
Temperature
Minimum
Temperature
130
130
110
110
90
90
70
70
50
50
30
30
10
-10
10
-10
-30
1/8
Figure 2
1/4
3/8
1/2
GAP SETTINGS
Inches
5/8
Table 1
Expansion or Contraction for Various Temperature Differences
Temperature Differential
F
25
50
75
100
125
150
Feet
Feet
Feet
Feet
Feet
Feet
175
95 Feet
59 Feet
Note for gap set and hold down/guide location, see installation instruction above.
*1" slotted holes in each expansion connector allow 5/8" total expansion or contraction.
Technical Data
Always observe common safety practices when assembling tray and fittings. Installations generally require some
field cutting. Dust created during fabrication presents no serious health hazard, but skin irritation may be
experienced by some workers.
Operators of saws and drills should wear masks, long sleeve shirts or coveralls.
Fabrication with fiberglass is relatively easy and comparable to working with wood. Ordinary hand tools may be
used in most cases.
Avoid excessive pressure when sawing or drilling. Too much force can rapidly dull tools and also produce
excessive heat which softens the bonding resin in the fiberglass resulting in a ragged edge rather than a cleancut edge.
Field cutting is simple and can be accomplished with a circular power saw with an abrasive cut-off wheel
(masonry type) or hack saw (24 to 32 teeth per inch).
Drill fiberglass as you would drill hard wood. Standard twist drills are more than adequate.
Any surface that has been drilled, cut, sanded or otherwise broken, must be sealed with a compatible resin.
(Accessories section, Page 3)
Carbide tipped saw blades and drill bits are recommended when cutting large quantities.
Support the fiberglass material firmly during cutting operations to keep material from shifting which may cause
chipping at the cut edge.
Each tray section length should be equal to or greater than the support span.
When possible, the splice should be located at quarter span.
Fittings should be supported as per NEMA FG-1.
Cable Tray System shall be made of straight sections, fitting and accessories as defined in the latest
NEMA standards publication FG-1.
Straight section structural elements; side rails, rungs and splice plates shall be pultruded from glass
fiber reinforced polyester or vinylester resin.
2.2
Pultruded shapes shall be constructed with a surface veil to insure a resin-rich surface and ultraviolet
resin.
2.3
Pultruded shapes shall meet ASTM E-84, Class 1 flame rating and self-extinguishing requirements of
ASTM D-635.
3.0 Construction
3.1
Straight section lengths will be 120 inches (10ft.) or 240 inches (20ft.) standard.
3.2
Side rails will be inward C" configuration and be predrilled to accept splice plates.
3.3
Loading depths for cable tray systems shall be 5", 3" or 2" as per NEMA FG-1 tolerances. Overall
heights shall be 6", 4" or 3" respectively.
3.4
3.5 Fitting
3.5.1 Molded fittings shall be formed with a minimum 3" tangent following the radius.
3.5.2 3" or 5" loading depth systems shall have 90 and 45 molded fittings in 12" or 24" radius.
3.5.3 All fittings not included in 3.5.2 should be of mitered construction.
3.6
Width - usable inside tray width shall be 6"-9"-12"-18"-24"-30"- 36". Outside width shall not exceed
inside by more than a total of 2".
3.7
Straight and expansion splice plates will be of stainless steel or fiberglass design with an eight-bolt
pattern in 5" fill systems and four-bolt pattern in 3" and 2" fill systems.
3.8
3.9
Cable tray must have integral connection between side rails and rungs consisting of non-metallic
mechanical fasteners and adhesive bonding.
4.0 Manufacture
4.1
4.2
Technical Data
Numbering System
To order a straight section of cable tray, select the appropriate size
and material from the charts below and place those symbols in the
sequence shown to form the complete catalog number.
Procedure:
1. Select the correct Seasafe series cable tray using the Load Data
for straight sections shown in the appropriate tabbed section
for 6", 4", or 3" cable tray.
2. Select the resin required. Refer to Corrosion Guide in pages
2-3 of the Technical Data section, for the effect of enviromental
conditions on the desired material and the effective
temperature range on page 6 of the same section.
3. The tray prefix is completed by inserting the rung spacing.
4. The fourth box contains the desired width in inches.
5. The fifth box contains the straight section length in inches.
120 (10') or 240 (20').
Example:
Series
Material
Rung Spacing
Width
Length
6"
4"
3"
P-Polyester Resin
V-Vinylester Resin
6"
9"
12"
18"
6"
9"
12"
18"
24"
30"
36"
120(10 ft)
240(20 ft)
Marine Rung
Option (See Page 41)
Note: One pair of splice plates with SS6 hardware included.
24
Height
Material
Width
Angle
6"
4"
3"
P-Polyester Resin
V- Vinylester Resin
6"
9"
12"
18"
24"
30"
36"
30
45
60
90
10
90
HB
24
Type
HB-Horizontal Bend
HT-Horizontal Tee
HX-Horizontal Cross
VI-Vertical Inside Bend
VO-Vertical Outside Bend
VT-Vertical Tee
VTU-Vertical Tee, Up
RR-Right Reducer
LR-Left Reducer
SR-Straight Reducer
HYR-Horizontal Wye, Right
HYL-Horizontal Wye, Left
CSF-Cable Support Fitting
Radius
12"
24"
36"
6 System
Seasafe
Series
Safety
Factor
6B
1.5
Loading - NEMA 20B *tested per NEMA FG-1, 12" rung spacing
Seasafe
Series
Safety
Factor
6C
1.5
Loading - NEMA 20C - S.F. 1.5 *tested per NEMA FG-1, 12" rung spacing
Seasafe
Series
Safety
Factor
1.5
H6C
2.0
Loading - NEMA 20C - S.F. 2.0 *tested per NEMA FG-1, 12" rung spacing
11
-RBend
Radius
Tray
Width
in.
in.
Catalog No.
12
6
9
12
18
24
30
36
(Prefix)-06-90HB12
(Prefix)-09-90HB12
(Prefix)-12-90HB12
(Prefix)-18-90HB12
(Prefix)-24-90HB12
(Prefix)-30-90HB12
(Prefix)-36-90HB12
20
21
22
26
29
32
35
3/8
7/8
3/8
3/8
3/8
3/8
3/8
20
21
22
26
29
32
35
3/8
7/8
3/8
3/8
3/8
3/8
3/8
24
6
9
12
18
24
30
36
(Prefix)-06-90HB24
(Prefix)-09-90HB24
* (Prefix)-12-90HB24
(Prefix)-18-90HB24
* (Prefix)-24-90HB24
* (Prefix)-30-90HB24
(Prefix)-36-90HB24
34
35
37
40
43
46
49
1/4
3/4
1/4
1/4
1/4
1/4
1/4
34
35
37
40
43
46
49
1/4
3/4
1/4
1/4
1/4
1/4
1/4
6
9
12
18
24
30
36
(Prefix)-06-90HB36
(Prefix)-09-90HB36
(Prefix)-12-90HB36
(Prefix)-18-90HB36
(Prefix)-24-90HB36
(Prefix)-30-90HB36
(Prefix)-36-90HB36
46
47
49
52
55
58
61
1/4
3/4
1/4
1/4
1/4
1/4
1/4
46
47
49
52
55
58
61
1/4
3/4
1/4
1/4
1/4
1/4
1/4
36
in.
in.
45 Horizontal Bend
Dimensions
-RBend
Radius
Tray
Width
in.
in.
Catalog No.
12
6
9
12
18
24
30
36
(Prefix)-06-45HB12
(Prefix)-09-45HB12
(Prefix)-12-45HB12
(Prefix)-18-45HB12
(Prefix)-24-45HB12
(Prefix)-30-45HB12
(Prefix)-36-45HB12
22
23
24
27
29
31
33
13/16
7/8
7/8
1/16
3/16
5/16
7/16
9
9
10
11
12
13
13
7/16
7/8
5/16
3/16
1/16
24
6
9
12
18
24
30
36
(Prefix)-06-45HB24
(Prefix)-09-45HB24
(Prefix)-12-45HB24
* (Prefix)-18-45HB24
* (Prefix)-24-45HB24
* (Prefix)-30-45HB24
(Prefix)-36-45HB24
24
25
26
28
30
32
34
3/16
1/4
5/16
7/16
9/16
11/16
13/16
36
6
9
2
18
24
30
36
(Prefix)-06-45HB36
(Prefix)-09-45HB36
(Prefix)-12-45HB36
(Prefix)-18-45HB36
(Prefix)-24-45HB36
(Prefix)-30-45HB36
(Prefix)-36-45HB36
32
33
34
36
39
41
43
5/8
11/16
3/4
7/8
in.
in.
1/8
1/4
12
C
in.
3/8
7/8
13
14
14
15
17
18
19
10
10
10
11
12
13
14
1/16
1/2
15/16
13/16
11/16
9/16
7/16
14
14
15
16
17
19
20
3/16
13/16
7/16
11/16
15/16
3/16
3/8
13
13
14
15
16
17
17
1/2
15/16
3/8
1/4
3/16
1/16
15/16
19
19
20
21
22
24
25
1/8
3/4
3/8
5/8
7/8
1/8
5/16
5/8
7/8
1/8
3/8
9/16
Tray
Width
in.
in.
Catalog No.
12
(Prefix)-06-90(*)12
(Prefix)-09-90(*)12
(Prefix)-12-90(*)12
(Prefix)-18-90(*)12
(Prefix)-24-90(*)12
(Prefix)-30-90(*)12
(Prefix)-36-90(*)12
in.
in.
24
6
9
12
18
24
30
36
* (Prefix)-06-90(*)24
* (Prefix)-09-90(*)24
(Prefix)-12-90(*)24
* (Prefix)-18-90(*)24
* (Prefix)-24-90(*)24
* (Prefix)-30-90(*)24
* (Prefix)-36-90(*)24
*
36
6
9
12
12
24
30
36
(Prefix)-06-90(*)36
(Prefix)-09-90(*)36
(Prefix)-12-90(*)36
(Prefix)-18-90(*)36
(Prefix)-24-90(*)36
(Prefix)-30-90(*)36
(Prefix)-36-90(*)36
20 5/8
20 5/8
27 1/16
27 1/16
31 1/4
31 1/4
37 1/4
37 1/4
43
43
49 1/2
49 1/2
Vertical
Outside Bend
VO
6 System
in.
in.
6
9
12
18
24
30
36
-RTray
Bend Width
Radius
Vertical Bend - 90
Vertical Inside
Vertical Outside
Bend
Bend
B
A
B
A
Vertical
Inside Bend
VI
Vertical Bend - 45
Catalog No.
in.
in.
12
6
9
12
18
24
30
36
(Prefix)-06-45(*)24
(Prefix)-09-45(*)24
(Prefix)-12-45(*)24
(Prefix)-18-45(*)12
(Prefix)-24-45(*)12
(Prefix)-30-45(*)12
(Prefix)-36-45(*)12
24
6
9
12
18
24
30
36
*(Prefix)-06-45(*)24
*(Prefix)-09-45(*)24
(Prefix)-12-45(*)24
*(Prefix)-18-45(*)24
*(Prefix)-24-45(*)24
*
*(Prefix)-30-45(*)24
*(Prefix)-36-45(*)24
36
6
9
12
18
24
30
36
(Prefix)-06-45(*)36
(Prefix)-09-45(*)36
(Prefix)-12-45(*)36
(Prefix)-18-45(*)36
(Prefix)-24-45(*)36
(Prefix)-30-45(*)36
(Prefix)-36-45(*)36
Vertical Outside
Bend
A
B
C
Vertical Inside
Bend
A
B
C
in.
in.
in.
in.
20 1/2
8 1/2
14 1/2
24 3/4
in.
10 1/4
in.
14 1/2
22 1/16
9 1/8
12 7/16
26 5/16
10 15/16
14 25/32
20 1/2
8 1/2
14 1/2
24 3/4
10 1/4
14 1/2
13
Vertical
Outside Bend
VO
Vertical
Inside Bend
VI
-RBend
Radius
Tray
Width
in.
in.
12
6
9
12
18
24
30
36
(Prefix)-06-HT12
(Prefix)-09-HT12
(Prefix)-12-HT12
(Prefix)-18-HT12
(Prefix)-24-HT12
(Prefix)-30-HT12
(Prefix)-36-HT12
19
20
22
25
28
31
34
1/4
3/4
1/4
1/4
1/4
1/4
1/4
38
41
44
50
56
62
68
24
6
9
12
18
24
30
36
* (Prefix)-06-HT24
* (Prefix)-09-HT24
* (Prefix)-12-HT24
* (Prefix)-18-HT24
* (Prefix)-24-HT24
* (Prefix)-30-HT24
* (Prefix)-36-HT24
34
35
37
40
43
46
49
1/4
3/4
1/4
1/4
1/4
1/4
1/4
68
71
74
80
86
92
98
1/2
1/2
1/2
1/2
1/2
1/2
1/2
36
6
9
12
18
24
30
36
(Prefix)-06-HT36
(Prefix)-09-HT36
(Prefix)-12-HT36
(Prefix)-18-HT36
(Prefix)-24-HT36
(Prefix)-30-HT36
(Prefix)-36-HT36
46
47
49
52
55
58
61
1/4
3/4
1/4
1/4
1/4
1/4
1/4
92
95
98
104
110
116
122
1/2
1/2
1/2
1/2
1/2
1/2
1/2
in.
Horizontal Cross
Dimensions
A
Catalog No.
in.
-RBend
Radius
Tray
Width
in.
in.
12
6
9
12
18
24
30
36
(Prefix)-06-HX12
(Prefix)-09-HX12
(Prefix)-12-HX12
(Prefix)-18-HX12
(Prefix)-24-HX12
(Prefix)-30-HX12
(Prefix)-36-HX12
19
20
22
25
28
31
34
1/4
3/4
1/4
1/4
1/4
1/4
1/4
38
41
44
50
56
62
68
24
6
9
12
18
24
30
36
* (Prefix)-06-HX24
* (Prefix)-09-HX24
(Prefix)-12-HX24
* (Prefix)-18-HX24
* (Prefix)-24-HX24
*
* (Prefix)-30-HX24
* (Prefix)-36-HX24
34
35
37
40
43
46
49
1/4
3/4
1/4
1/4
1/4
1/4
1/4
68
71
74
80
86
92
98
1/2
1/2
1/2
1/2
1/2
1/2
1/2
36
6
9
12
18
24
30
36
(Prefix)-06-HX36
(Prefix)-09-HX36
(Prefix)-12-HX36
(Prefix)-18-HX36
(Prefix)-24-HX36
(Prefix)-30-HX36
(Prefix)-36-HX36
46
47
49
52
55
58
61
1/4
3/4
1/4
1/4
1/4
1/4
1/4
92
95
98
104
110
116
122
1/2
1/2
1/2
1/2
1/2
1/2
1/2
in.
14
B
in.
Tray Width
W1
W2
22 1/4
22 1/4
38
41
6
9
12
(Prefix)-18-06-HT12
(Prefix)-18-09-HT12
(Prefix)-18-12-HT12
25 1/4
25 1/4
25 1/4
38
41
44
6
9
12
18
(Prefix)-24-06-HT12
(Prefix)-24-09-HT12
(Prefix)-24-12-HT12
(Prefix)-24-18-HT12
28
28
28
28
1/4
1/4
1/4
1/4
38
41
44
50
6
9
12
18
24
(Prefix)-30-06-HT12
(Prefix)-30-09-HT12
(Prefix)-30-12-HT12
(Prefix)-30-18-HT12
(Prefix)-30-24-HT12
31
31
31
31
31
1/4
1/4
1/4
1/4
1/4
38
41
44
50
56
6
9
12
18
24
30
(Prefix)-36-06-HT12
(Prefix)-36-09-HT12
(Prefix)-36-12-HT12
(Prefix)-36-18-HT12
(Prefix)-36-24-HT12
(Prefix)-36-30-HT12
34
34
34
34
34
34
1/4
1/4
1/4
1/4
1/4
1/4
38
41
44
50
56
62
38
36" Radius
A
in.
in.
in.
in.
*Insert radius
(24"or 36")
(Prefix)-09-06-HT*
35 3/4
68
1/2
47 3/4
92 1/2
12
6
9
(Prefix)-12-06-HT*
(Prefix)-12-09-HT*
37 1/4
37 1/4
68
71
1/2
1/2
49 1/4
49 1/4
92 1/2
95 1/2
6
9
12
(Prefix)-18-06-HT*
(Prefix)-18-09-HT*
(Prefix)-18-12-HT*
40 1/4
40 1/4
40 1/4
68
71
74
1/2
1/2
1/2
52 1/4
52 1/4
52 1/4
92 1/2
95 1/2
98 1/2
6
9
12
18
(Prefix)-24-06-HT*
(Prefix)-24-09-HT*
(Prefix)-24-12-HT*
(Prefix)-24-18-HT*
43
43
43
43
1/4
1/4
1/4
1/4
68
71
74
80
1/2
1/2
1/2
1/2
55
55
55
55
1/4
1/4
1/4
1/4
92
95
98
104
1/2
1/2
1/2
1/2
6
9
12
18
24
(Prefix)-30-06-HT*
(Prefix)-30-09-HT*
(Prefix)-30-12-HT*
(Prefix)-30-18-HT*
(Prefix)-30-24-HT*
46
46
46
46
46
1/4
1/4
1/4
1/4
1/4
68
71
74
80
86
1/2
1/2
1/2
1/2
1/2
58
58
58
58
58
1/4
1/4
1/4
1/4
1/4
92
95
98
104
110
1/2
1/2
1/2
1/2
1/2
6
9
12
18
24
30
(Prefix)-36-06-HT*
(Prefix)-36-09-HT*
(Prefix)-36-12-HT*
(Prefix)-36-18-HT*
(Prefix)-36-24-HT*
(Prefix)-36-30-HT*
49
49
49
49
49
49
1/4
1/4
1/4
1/4
1/4
1/4
68
71
74
80
86
92
1/2
1/2
1/2
1/2
1/2
1/2
61
61
61
61
61
61
1/4
1/4
1/4
1/4
1/4
1/4
92
95
98
104
110
116
1/2
1/2
1/2
1/2
1/2
1/2
18
24
30
36
in.
in.
15
6 System
12
36
Catalog No.
(Prefix)-09-06-HT12
(Prefix)-12-06-HT12
(Prefix)-12-09-HT12
6
9
30
Tray Width
W2
W1
in.
in.
6
24
A
in.
20 3/4
in.
9
18
12" Radius
Catalog No.
Catalog No.
*Insert radius
36" Radius
B
in.
in.
in.
(24"or 36")
9
12
18
24
30
36
(Prefix)-06-09-HT*
(Prefix)-06-12-HT*
(Prefix)-06-18-HT*
(Prefix)-06-24-HT*
(Prefix)-06-30-HT*
(Prefix)-06-36-HT*
34
34
34
34
34
34
1/4
1/4
1/4
1/4
1/4
1/4
71
74
80
86
92
98
1/2
1/2
1/2
1/2
1/2
1/2
46
46
46
46
46
46
1/4
1/4
1/4
1/4
1/4
1/4
95
98
104
110
116
122
1/2
1/2
1/2
1/2
1/2
1/2
12
18
24
30
36
(Prefix)-09-12-HT*
(Prefix)-09-18-HT*
(Prefix)-09-24-HT*
(Prefix)-09-30-HT*
(Prefix)-09-36-HT*
35
35
35
35
35
3/4
3/4
3/4
3/4
3/4
74
80
86
92
98
1/2
1/2
1/2
1/2
1/2
47
47
47
47
47
3/4
3/4
3/4
3/4
3/4
98
104
110
116
122
1/2
1/2
1/2
1/2
1/2
18
24
30
36
(Prefix)-12-18-HT*
(Prefix)-12-24-HT*
(Prefix)-12-30-HT*
(Prefix)-12-36-HT*
37
37
37
37
1/4
1/4
1/4
1/4
80
86
92
98
1/2
1/2
1/2
1/2
49
49
49
49
1/4
1/4
1/4
1/4
104
110
116
122
1/2
1/2
1/2
1/2
24
30
36
(Prefix)-18-24-HT*
(Prefix)-18-30-HT*
(Prefix)-18-36-HT*
40 1/4
40 1/4
40 1/4
86 1/2
92 1/2
98 1/2
52 1/4
52 1/4
52 1/4
110 1/2
116 1/2
122 1/2
24
30
36
(Prefix)-24-30-HT*
(Prefix)-24-36-HT*
43 1/4
43 1/4
92 1/2
98 1/2
55 1/4
55 1/4
116 1/2
122 1/2
30
36
(Prefix)-30-36-HT*
46 1/4
98 1/2
58 1/4
122 1/2
in.
12
18
Tray Width
W1
W2
in.
Catalog No.
in.
in.
12" Radius
A
Prefix - 36 - 18 - HT 24
B
in.
in.
in.
9
12
18
24
30
36
(Prefix)-06-09-HT12
(Prefix)-06-12-HT12
(Prefix)-06-18-HT12
(Prefix)-06-24-HT12
(Prefix)-06-30-HT12
(Prefix)-06-36-HT12
19
19
19
19
19
19
1/4
1/4
1/4
1/4
1/4
1/4
41
44
50
56
62
68
12
18
24
30
36
(Prefix)-09-12-HT12
(Prefix)-09-18-HT12
(Prefix)-09-24-HT12
(Prefix)-09-30-HT12
(Prefix)-09-36-HT12
20
20
20
20
20
3/4
3/4
3/4
3/4
3/4
44
50
56
62
68
18
24
30
36
(Prefix)-12-18-HT12
(Prefix)-12-24-HT12
(Prefix)-12-30-HT12
(Prefix)-12-36-HT12
22
22
22
22
1/4
1/4
1/4
1/4
50
56
62
68
24
30
36
(Prefix)-18-24-HT12
(Prefix)-18-30-HT12
(Prefix)-18-36-HT12
25 1/4
25 1/4
25 1/4
56
62
68
24
30
36
(Prefix)-24-30-HT12
(Prefix)-24-36-HT12
28 1/4
28 1/4
62
68
30
36
(Prefix)-30-36-HT12
31 1/4
68
12
18
16
Radius
Fitting Type
Width 2
Width1
Insert fitting prefix to
complete catalog number
41
19 1/4
20 3/4
44
44
6
9
12
(Prefix)-18-06-HX12
(Prefix)-18-09-HX12
(Prefix)-18-12-HX12
19 1/4
20 3/4
22 1/4
50
50
50
6
9
12
18
(Prefix)-24-06-HX12
(Prefix)-24-09-HX12
(Prefix)-24-12-HX12
(Prefix)-24-18-HX12
19
20
22
25
1/4
3/4
1/4
1/4
56
56
56
56
6
9
12
18
24
(Prefix)-30-06-HX12
(Prefix)-30-09-HX12
(Prefix)-30-12-HX12
(Prefix)-30-18-HX12
(Prefix)-30-24-HX12
19
20
22
25
28
1/4
3/4
1/4
1/4
1/4
62
62
62
62
62
6
9
12
18
24
30
(Prefix)-36-06-HX12
(Prefix)-36-09-HX12
(Prefix)-36-12-HX12
(Prefix)-36-18-HX12
(Prefix)-36-24-HX12
(Prefix)-36-30-HX12
19
20
22
25
28
31
1/4
3/4
1/4
1/4
1/4
1/4
68
68
68
68
68
68
Catalog No.
*Insert radius
(24"or 36")
36" Radius
in.
6 System
in.
19 1/4
(Prefix)-12-06-HX12
(Prefix)-12-09-HX12
12
36
in.
(Prefix)-09-06-HX12
6
9
30
Tray Width
W2
W1
in.
in.
6
24
A
in.
in.
9
18
12" Radius
Catalog No.
in.
in.
9
12
18
24
30
36
(Prefix)-06-09-HX
(Prefix)-06-12-HX
(Prefix)-06-18-HX
(Prefix)-06-24-HX
(Prefix)-06-30-HX
(Prefix)-06-36-HX
34
34
34
34
34
34
1/4
1/4
1/4
1/4
1/4
1/4
71
74
80
86
92
98
1/2
1/2
1/2
1/2
1/2
1/2
46
46
46
46
46
46
1/4
1/4
1/4
1/4
1/4
1/4
95
98
104
110
116
122
1/2
1/2
1/2
1/2
1/2
1/2
12
18
24
30
36
(Prefix)-09-12-HX
(Prefix)-09-18-HX
(Prefix)-09-24-HX
(Prefix)-09-30-HX
(Prefix)-09-36-HX
35
35
35
35
35
3/4
3/4
3/4
3/4
3/4
74
80
86
92
98
1/2
1/2
1/2
1/2
1/2
47
47
47
47
47
3/4
3/4
3/4
3/4
3/4
98
104
110
116
122
1/2
1/2
1/2
1/2
1/2
18
24
30
36
(Prefix)-12-18-HX
(Prefix)-12-24-HX
(Prefix)-12-30-HX
(Prefix)-12-36-HX
37
37
37
37
1/4
1/4
1/4
1/4
80
86
92
98
1/2
1/2
1/2
1/2
49
49
49
49
1/4
1/4
1/4
1/4
104
110
116
122
1/2
1/2
1/2
1/2
24
30
36
(Prefix)-18-24-HX
(Prefix)-18-30-HX
(Prefix)-18-36-HX
40 1/4
40 1/4
40 1/4
86 1/2
92 1/2
98 1/2
52 1/4
52 1/4
52 1/4
110 1/2
116 1/2
122 1/2
24
30
36
(Prefix)-24-30-HX
(Prefix)-24-36-HX
43 1/4
43 1/4
92 1/2
98 1/2
55 1/4
55 1/4
116 1/2
122 1/2
30
36
(Prefix)-30-36-HX
46 1/4
98 1/2
58 1/4
122 1/2
12
18
17
6" Reducers
Tray Width
Straight Reducer
A
W1
W2
in.
in.
(Prefix)-09-LR06
17 1/2
(Prefix)-09-SR06
16
(Prefix)-09-RR06
17 1/2
12
6
9
(Prefix)-12-LR06
(Prefix)-12-LR09
20 1/2
17 1/2
(Prefix)-12-SR06
(Prefix)-12-SR09
17 1/2
16
(Prefix)-12-RR06
(Prefix)-12-RR09
20 1/2
17 1/2
6
9
12
(Prefix)-18-LR06
(Prefix)-18-LR09
(Prefix)-18-LR12
26 1/2
23 1/2
20 1/2
(Prefix)-18-SR06
(Prefix)-18-SR09
(Prefix)-18-SR12
20 1/2
19
17 1/2
(Prefix)-18-RR06
(Prefix)-18-RR09
(Prefix)-18-RR12
26 1/2
23 1/2
20 1/2
6
9
12
18
(Prefix)-24-LR06
(Prefix)-24-LR09
(Prefix)-24-LR12
(Prefix)-24-LR18
32
29
26
20
1/2
1/2
1/2
1/2
(Prefix)-24-SR06
(Prefix)-24-SR09
(Prefix)-24-SR12
(Prefix)-24-SR18
23 1/2
22
20 1/2
17 1/2
(Prefix)-24-RR06
(Prefix)-24-RR09
(Prefix)-24-RR12
(Prefix)-24-RR18
32
29
26
20
1/2
1/2
1/2
1/2
6
9
12
18
24
(Prefix)-30-LR06
(Prefix)-30-LR09
(Prefix)-30-LR12
(Prefix)-30-LR18
(Prefix)-30-LR24
38
35
32
26
20
1/2
1/2
1/2
1/2
1/2
(Prefix)-30-SR06
(Prefix)-30-SR09
(Prefix)-30-SR12
(Prefix)-30-SR18
(Prefix)-30-SR24
26
25
23
20
17
(Prefix)-30-RR06
(Prefix)-30-RR09
(Prefix)-30-RR12
(Prefix)-30-RR18
(Prefix)-30-RR24
38
35
32
26
20
1/2
1/2
1/2
1/2
1/2
6
9
12
18
24
30
(Prefix)-36-LR06
(Prefix)-36-LR09
(Prefix)-36-LR12
(Prefix)-36-LR18
(Prefix)-36-LR24
(Prefix)-36-LR30
44
41
38
32
26
20
1/2
1/2
1/2
1/2
1/2
1/2
(Prefix)-36-SR06
(Prefix)-36-SR09
(Prefix)-36-SR12
(Prefix)-36-SR18
(Prefix)-36-SR24
(Prefix)-36-SR30
29
28
26
23
20
17
(Prefix)-36-RR06
(Prefix)-36-RR09
(Prefix)-36-RR12
(Prefix)-36-RR18
(Prefix)-36-RR24
(Prefix)-36-RR30
44
41
38
32
26
20
1/2
1/2
1/2
1/2
1/2
1/2
18
24
30
36
Catalog No.
in.
Catalog No.
18
in.
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
Catalog No.
in.
6 System
Vertical Tee
Down
Prefix - 06 - VT - 24
Radius
Fitting Type
Width
Insert fitting prefix to
complete catalog number
Tray
Width
in.
in.
6
9
12
18
24
30
12
Catalog No.
(Prefix)-06-(*)12
(Prefix)-09-(*)12
(Prefix)-12-(*)12
(Prefix)-18-(*)12
(Prefix)-24-(*)12
(Prefix)-30-(*)12
24
6
9
12
18
24
30
36
* (Prefix)-06-(*)24
* (Prefix)-09-(*)24
(Prefix)-12-(*)24
* (Prefix)-18-(*)24
* (Prefix)-24-(*)24
* (Prefix)-30-(*)24
* (Prefix)-36-(*)24
*
36
6
9
12
18
24
30
36
(Prefix)-06-(*)36
(Prefix)-09-(*)36
(Prefix)-12-(*)36
(Prefix)-18-(*)36
(Prefix)-24-(*)36
(Prefix)-30-(*)36
(Prefix)-36-(*)36
Vertical Tee Up
B
in.
in.
in.
in.
20 5/8
47 3/16
26 5/8
47 3/16
31 1/4
68 1/2
37 1/4
68 1/2
43
92
49
92
19
Seasafe Safety
Series Factor
4
1.5
Loading - NEMA 12C *tested per NEMA FG-1, 12" rung spacing
20
-RBend
Radius
Tray
Width
in.
in.
12
6
9
12
18
24
30
36
(Prefix)-06-90HB12
(Prefix)-09-90HB12
(Prefix)-12-90HB12
* (Prefix)-18-90HB12
* (Prefix)-24-90HB12
* (Prefix)-30-90HB12
* (Prefix)-36-90HB12
*
20
21
25
28
31
34
37
3/8
7/8
1/4
1/4
1/4
1/4
1/4
20
21
25
28
31
34
37
3/8
7/8
1/4
1/4
1/4
1/4
1/4
* (Prefix)-06-90HB24
(Prefix)-09-90HB24
24
6
9
12
18
24
30
36
(Prefix)-36-90HB24
34
35
37
40
43
46
49
1/4
3/4
1/4
1/4
1/4
1/4
1/4
34
34
37
40
43
46
49
1/4
3/4
1/4
1/4
1/4
1/4
1/4
6
9
12
18
24
30
36
(Prefix)-06-90HB36
(Prefix)-09-90HB36
(Prefix)-12-90HB36
(Prefix)-18-90HB36
(Prefix)-24-90HB36
(Prefix)-30-90HB36
(Prefix)-36-90HB36
46
47
49
52
55
58
61
1/4
3/4
1/4
1/4
1/4
1/4
1/4
46
47
49
52
55
58
61
1/4
3/4
1/4
1/4
1/4
1/4
1/4
-RBend
Radius
in.
12
24
36
Tray
Width
in.
in.
4 System
36
(Prefix)-12-90HB24
* (Prefix)-18-90HB24
* (Prefix)-24-90HB24
* (Prefix)-30-90HB24
45 Horizontal Bend
Dimensions
Catalog No.
6
9
12
18
24
30
36
(Prefix)-06-45HB12
(Prefix)-09-45HB12
* (Prefix)-12-45HB12
* (Prefix)-18-45HB12
* (Prefix)-24-45HB12
* (Prefix)-30-45HB12
* (Prefix)-36-45HB12
22
23
17
20
22
24
26
6
9
12
18
24
30
36
(Prefix)-06-45HB24
* (Prefix)-09-45HB24
6
9
12
18
24
30
36
in.
in.
in.
1/16
3/16
5/16
9
9
7
8
9
10
10
(Prefix)-36-45HB24
24
25
26
28
30
32
34
3/16
1/4
5/16
7/16
9/16
11/16
13/16
(Prefix)-06-45HB36
(Prefix)-09-45HB36
(Prefix)-12-45HB36
(Prefix)-18-45HB36
(Prefix)-24-45HB36
(Prefix)-30-45HB36
(Prefix)-36-45HB36
32
33
34
36
39
41
43
5/8
11/16
3/4
7/8
(Prefix)-12-45HB24
* (Prefix)-18-45HB24
* (Prefix)-24-45HB24
* (Prefix)-30-45HB24
13/16
7/8
7/8
1/8
1/4
21
7/16
7/8
3/8
1/4
1/8
15/16
14
15
10
11
12
14
15
3/4
15/16
7/16
11/16
15/16
3/16
7/16
10
10
10
11
12
13
14
1/2
15/16
13/16
11/16
9/16
7/16
14
16
15
16
17
25
27
3/16
3/4
7/16
11/16
15/16
1/2
15/16
13
13
14
15
16
17
17
1/2
15/16
3/8
1/4
3/16
1/16
15/16
20
21
22
25
27
30
32
1/2
11/16
15/16
7/16
15/16
7/16
7/8
Tray
Width
in.
in.
Catalog No.
Vertical Bend - 90
Vertical Inside
Vertical Outside
Bend
Bend
B
B
A
A
in.
in.
in.
19 1/4
23 1/4
in.
12
6
9
12
18
24
30
36
* (Prefix)-06-90(*)12
* (Prefix)-09-90(*)12
(Prefix)-12-90(*)12
* (Prefix)-18-90(*)12
* (Prefix)-24-90(*)12
* (Prefix)-30-90(*)12
* (Prefix)-36-90(*)12
24
6
9
12
18
24
30
36
(Prefix)-06-90(*)24
(Prefix)-09-90(*)24
(Prefix)-12-90(*)24
(Prefix)-18-90(*)24
(Prefix)-24-90(*)24
(Prefix)-30-90(*)24
(Prefix)-36-90(*)24
31
31
35 1/2
35 1/2
36
6
9
12
18
24
30
36
(Prefix)-06-90(*)36
(Prefix)-09-90(*)36
(Prefix)-12-90(*)36
(Prefix)-18-90(*)36
(Prefix)-24-90(*)36
(Prefix)-30-90(*)36
(Prefix)-36-90(*)36
43
43
48 1/2
48 1/2
19 1/4
Vertical
Outside Bend
VO
23 1/4
Vertical
Inside Bend
VI
Vertical Bend - 45
-RTray
Bend Width
Radius
Catalog No.
Vertical Inside
Bend
A
B
C
Vertical Outside
Bend
A
B
C
in.
in.
12
6
9
12
18
24
30
36
*(Prefix)-06-45(*)12
(Prefix)-09-45(*)12
*(Prefix)-12-45(*)12
*(Prefix)-18-45(*)12
*(Prefix)-24-45(*)12
*(Prefix)-30-45(*)12
*(Prefix)-36-45(*)12
*
24
6
9
12
18
24
30
36
(Prefix)-06-45(*)24
(Prefix)-09-45(*)24
(Prefix)-12-45(*)24
(Prefix)-18-45(*)24
(Prefix)-24-45(*)24
(Prefix)-30-45(*)24
(Prefix)-36-45(*)24
20 1/2
8 1/2
12 11/16
23 5/16
9 11/16
13 11/16
36
6
9
12
18
24
30
36
(Prefix)-06-45(*)36
(Prefix)-09-45(*)36
(Prefix)-12-45(*)36
(Prefix)-18-45(*)36
(Prefix)-24-45(*)36
(Prefix)-30-45(*)36
(Prefix)-36-45(*)36
20 1/2
8 1/2
13 11/16
23
9 11/16
13 11/16
in.
in.
13 5/8
5 5/8
in.
in.
16 7/16
6 13/16
in.
22
Vertical
Outside Bend
VO
in.
6 13/16
Vertical
Inside Bend
VI
-RBend
Radius
Tray
Width
in.
in.
12
6
9
12
18
24
30
36
* (Prefix)-06-HT12
* (Prefix)-09-HT12
* (Prefix)-12-HT12
(Prefix)-18-HT12
* (Prefix)-24-HT12
* (Prefix)-30-HT12
* (Prefix)-36-HT12
*
22
23
25
28
31
34
37
1/4
3/4
1/4
1/4
1/4
1/4
1/4
44
47
50
56
62
68
74
1/2
1/2
1/2
1/2
1/2
1/2
1/2
24
6
9
12
18
24
30
36
* (Prefix)-06-HT24
* (Prefix)-09-HT24
* (Prefix)-12-HT24
(Prefix)-18-HT24
* (Prefix)-24-HT24
* (Prefix)-30-HT24
* (Prefix)-36-HT24
*
34
35
37
40
43
46
49
1/4
3/4
1/4
1/4
1/4
1/4
1/4
68
71
74
80
86
92
98
1/2
1/2
1/2
1/2
1/2
1/2
1/2
36
6
9
12
18
24
30
36
(Prefix)-06-HT36
(Prefix)-09-HT36
(Prefix)-12-HT36
(Prefix)-18-HT36
(Prefix)-24-HT36
(Prefix)-30-HT36
(Prefix)-36-HT36
46
47
49
52
55
58
61
1/4
3/4
1/4
1/4
1/4
1/4
1/4
92
95
98
104
110
116
122
1/2
1/2
1/2
1/2
1/2
1/2
1/2
Catalog No.
in.
in.
Tray
Width
in.
in.
12
6
9
12
18
24
30
36
* (Prefix)-06-HX12
* (Prefix)-09-HX12
* (Prefix)-12-HX12
(Prefix)-18-HX12
* (Prefix)-24-HX12
* (Prefix)-30-HX12
* (Prefix)-36-HX12
*
22
23
25
28
31
34
37
1/4
3/4
1/4
1/4
1/4
1/4
1/4
44
47
50
56
62
68
74
1/2
1/2
1/2
1/2
1/2
1/2
1/2
24
6
9
12
18
24
30
36
* (Prefix)-06-HX24
* (Prefix)-09-HX24
* (Prefix)-12-HX24
(Prefix)-18-HX24
* (Prefix)-24-HX24
* (Prefix)-30-HX24
* (Prefix)-36-HX24
*
34
35
37
40
43
46
49
1/4
3/4
1/4
1/4
1/4
1/4
1/4
68
71
74
80
86
92
98
1/2
1/2
1/2
1/2
1/2
1/2
1/2
36
6
9
12
18
24
30
36
(Prefix)-06-HX36
(Prefix)-09-HX36
(Prefix)-12-HX36
(Prefix)-18-HX36
(Prefix)-24-HX36
(Prefix)-30-HX36
(Prefix)-36-HX36
46
47
49
52
55
58
61
1/4
3/4
1/4
1/4
1/4
1/4
1/4
92
95
98
104
110
116
122
1/2
1/2
1/2
1/2
1/2
1/2
1/2
Catalog No.
in.
in.
23
4 System
Horizontal Cross
Dimensions
-RBend
Radius
W2
in.
Catalog No.
*Insert radius
(12" or 24")
in.
B
in.
A
in.
in.
(Prefix)-09-06-HT*
23 3/4
44 1/2
35 3/4
68 1/2
12
6
9
(Prefix)-12-06-HT*
(Prefix)-12-09-HT*
25 1/4
25 1/4
44 1/2
47 1/2
37 1/4
37 1/4
68 1/2
71 1/2
6
9
12
(Prefix)-18-06-HT*
(Prefix)-18-09-HT*
(Prefix)-18-12-HT*
28 1/4
28 1/4
28 1/4
44 1/2
47 1/2
50 1/2
40 1/4
40 1/4
40 1/4
68 1/2
71 1/2
74 1/2
6
9
12
18
(Prefix)-24-06-HT*
(Prefix)-24-09-HT*
(Prefix)-24-12-HT*
(Prefix)-24-18-HT*
31
31
31
31
1/4
1/4
1/4
1/4
44
47
50
56
1/2
1/2
1/2
1/2
43
43
43
43
1/4
1/4
1/4
1/4
68
71
74
80
1/2
1/2
1/2
1/2
6
9
12
18
24
(Prefix)-30-06-HT*
(Prefix)-30-09-HT*
(Prefix)-30-12-HT*
(Prefix)-30-18-HT*
(Prefix)-30-24-HT*
34
34
34
34
34
1/4
1/4
1/4
1/4
1/4
44
47
50
56
62
1/2
1/2
1/2
1/2
1/2
46
46
46
46
46
1/4
1/4
1/4
1/4
1/4
68
71
74
80
86
1/2
1/2
1/2
1/2
1/2
6
9
12
18
24
30
(Prefix)-36-06-HT*
(Prefix)-36-09-HT*
(Prefix)-36-12-HT*
(Prefix)-36-18-HT*
(Prefix)-36-24-HT*
(Prefix)-36-30-HT*
37
37
37
37
37
37
1/4
1/4
1/4
1/4
1/4
1/4
44
47
50
56
62
68
1/2
1/2
1/2
1/2
1/2
1/2
49
49
49
49
49
49
1/4
1/4
1/4
1/4
1/4
1/4
68
71
74
80
86
92
1/2
1/2
1/2
1/2
1/2
1/2
18
24
30
36
Prefix - 36 - 18 - HT 24
Radius
Fitting Type
Width 2
Width1
Insert fitting prefix to
complete catalog number
36" Radius
Tray Width
W1
W2
in.
in.
12
6
9
18
24
30
36
Catalog No.
(Prefix)-09-06-HT36
in.
47 3/4
in.
92 1/2
(Prefix)-12-06-HT36
(Prefix)-12-09-HT36
49 1/4
49 1/4
92 1/2
95 1/2
6
9
12
(Prefix)-18-06-HT36
(Prefix)-18-09-HT36
(Prefix)-18-12-HT36
52 1/4
52 1/4
52 1/4
92 1/2
95 1/2
98 1/2
6
9
12
18
(Prefix)-24-06-HT36
(Prefix)-24-09-HT36
(Prefix)-24-12-HT36
(Prefix)-24-18-HT36
55
55
55
55
1/4
1/4
1/4
1/4
92
95
98
104
1/2
1/2
1/2
1/2
6
9
12
18
24
(Prefix)-30-06-HT36
(Prefix)-30-09-HT36
(Prefix)-30-12-HT36
(Prefix)-30-18-HT36
(Prefix)-30-24-HT36
58
58
58
58
58
1/4
1/4
1/4
1/4
1/4
92
95
98
104
110
1/2
1/2
1/2
1/2
1/2
6
9
12
18
24
30
(Prefix)-36-06-HT36
(Prefix)-36-09-HT36
(Prefix)-36-12-HT36
(Prefix)-36-18-HT36
(Prefix)-36-24-HT36
(Prefix)-36-30-HT36
61
61
61
61
61
61
1/4
1/4
1/4
1/4
1/4
1/4
92
95
98
104
110
116
1/2
1/2
1/2
1/2
1/2
1/2
24
W2
in.
Catalog No.
*Insert radius
(12" or 24")
in.
in.
in.
in.
(Prefix)-06-09-HT*
(Prefix)-06-12-HT*
(Prefix)-06-18-HT*
(Prefix)-06-24-HT*
(Prefix)-06-30-HT*
(Prefix)-06-36-HT*
22
22
22
22
22
22
1/4
1/4
1/4
1/4
1/4
1/4
47
50
56
62
68
74
1/2
1/2
1/2
1/2
1/2
1/2
34
34
34
34
34
34
1/4
1/4
1/4
1/4
1/4
1/4
71
74
80
86
92
98
1/2
1/2
1/2
1/2
1/2
1/2
12
18
24
30
36
(Prefix)-09-12-HT*
(Prefix)-09-18-HT*
(Prefix)-09-24-HT*
(Prefix)-09-30-HT*
(Prefix)-09-36-HT*
23
23
23
23
23
3/4
3/4
3/4
3/4
3/4
50
56
62
68
74
1/2
1/2
1/2
1/2
1/2
35
35
35
35
35
3/4
3/4
3/4
3/4
3/4
74
80
86
92
98
1/2
1/2
1/2
1/2
1/2
18
24
30
36
(Prefix)-12-18-HT*
(Prefix)-12-24-HT*
(Prefix)-12-30-HT*
(Prefix)-12-36-HT*
25
25
25
25
1/4
1/4
1/4
1/4
56
62
68
74
1/2
1/2
1/2
1/2
37
37
37
37
1/4
1/4
1/4
1/4
80
86
92
98
1/2
1/2
1/2
1/2
24
30
36
(Prefix)-18-24-HT*
(Prefix)-18-30-HT*
(Prefix)-18-36-HT*
28 1/4
28 1/4
28 1/4
62 1/2
68 1/2
74 1/2
40 1/4
40 1/4
40 1/4
86 1/2
92 1/2
98 1/2
24
30
36
(Prefix)-24-30-HT*
(Prefix)-24-36-HT*
31 1/4
31 1/4
68 1/2
74 1/2
43 1/4
43 1/4
92 1/2
98 1/2
30
36
(Prefix)-30-36-HT*
34 1/4
74 1/2
46 1/4
98 1/2
12
18
Tray Width
W1
W2
36" Radius
Catalog No.
Prefix - 18 - 36 HT 24
in.
9
12
18
24
30
36
(Prefix)-06-09-HT36
(Prefix)-06-12-HT36
(Prefix)-06-18-HT36
(Prefix)-06-24-HT36
(Prefix)-06-30-HT36
(Prefix)-06-36-HT36
46
46
46
46
46
46
in.
1/4
1/4
1/4
1/4
1/4
1/4
95
98
104
110
116
122
in.
1/2
1/2
1/2
1/2
1/2
1/2
12
18
24
30
36
(Prefix)-09-12-HT36
(Prefix)-09-18-HT36
(Prefix)-09-24-HT36
(Prefix)-09-30-HT36
(Prefix)-09-36-HT36
47
47
47
47
47
3/4
3/4
3/4
3/4
3/4
98
104
110
116
122
1/2
1/2
1/2
1/2
1/2
18
24
30
36
(Prefix)-12-18-HT36
(Prefix)-12-24-HT36
(Prefix)-12-30-HT36
(Prefix)-12-36-HT36
48
48
48
48
1/4
1/4
1/4
1/4
104
110
116
122
1/2
1/2
1/2
1/2
24
30
36
(Prefix)-18-24-HT36
(Prefix)-18-30-HT36
(Prefix)-18-36-HT36
52
52
52
1/4
1/4
1/4
110
116
122
1/2
1/2
1/2
24
30
36
(Prefix)-24-30-HT36
(Prefix)-24-36-HT36
55
55
1/4
1/4
116
122
1/2
1/2
30
36
(Prefix)-30-36-HT36
58
1/4
122
1/2
in.
12
18
25
Radius
Fitting Type
Width2
Width1
Insert fitting prefix to
complete catalog number
4 System
9
12
18
24
30
36
W2
in.
Catalog No.
*Insert radius
(12" or 24")
in.
in.
in.
in.
9
12
18
24
30
36
(Prefix)-06-09-HX
(Prefix)-06-12-HX
(Prefix)-06-18-HX
(Prefix)-06-24-HX
(Prefix)-06-30-HX
(Prefix)-06-36-HX
22
22
22
22
22
22
1/4
1/4
1/4
1/4
1/4
1/4
47
50
56
62
68
74
1/2
1/2
1/2
1/2
1/2
1/2
34
34
34
34
34
34
1/4
1/4
1/4
1/4
1/4
1/4
71
74
80
86
92
98
1/2
1/2
1/2
1/2
1/2
1/2
12
18
24
30
36
(Prefix)-09-12-HX
(Prefix)-09-18-HX
(Prefix)-09-24-HX
(Prefix)-09-30-HX
(Prefix)-09-36-HX
23
23
23
23
23
3/4
3/4
3/4
3/4
3/4
50
56
62
68
74
1/2
1/2
1/2
1/2
1/2
35
35
35
35
35
3/4
3/4
3/4
3/4
3/4
74
80
86
92
98
1/2
1/2
1/2
1/2
1/2
18
24
30
36
(Prefix)-12-18-HX
(Prefix)-12-24-HX
(Prefix)-12-30-HX
(Prefix)-12-36-HX
25
25
25
25
1/4
1/4
1/4
1/4
56
62
68
74
1/2
1/2
1/2
1/2
37
37
37
37
1/4
1/4
1/4
1/4
80
86
92
98
1/2
1/2
1/2
1/2
24
30
36
(Prefix)-18-24-HX
(Prefix)-18-30-HX
(Prefix)-18-36-HX
28 1/4
28 1/4
28 1/4
62 1/2
68 1/2
74 1/2
40 1/4
40 1/4
40 1/4
86 1/2
92 1/2
98 1/2
24
30
36
(Prefix)-24-30-HX
(Prefix)-24-36-HX
31 1/4
31 1/4
68 1/2
74 1/2
43 1/4
43 1/4
92 1/2
98 1/2
30
36
(Prefix)-30-36-HX
34 1/4
74 1/2
46 1/4
98 1/2
12
18
Tray Width
W1
W2
36" Radius
Catalog No.
B
in.
95 1/2
98 1/2
104 1/2
110 1/2
116 1/2
122 1/2
in.
9
12
18
24
30
36
(Prefix)-06-09-HX36
(Prefix)-06-12-HX36
(Prefix)-06-18-HX36
(Prefix)-06-24-HX36
(Prefix)-06-30-HX36
(Prefix)-06-36-HX36
in.
46 1/4
46 1/4
46 1/4
46 1/4
46 1/4
46 1/4
12
18
24
30
36
(Prefix)-09-12-HX36
(Prefix)-09-18-HX36
(Prefix)-09-24-HX36
(Prefix)-09-30-HX36
(Prefix)-09-36-HX36
47
47
47
47
47
3/4
3/4
3/4
3/4
3/4
98
104
110
116
122
1/2
1/2
1/2
1/2
1/2
18
24
30
36
(Prefix)-12-18-HX36
(Prefix)-12-24-HX36
(Prefix)-12-30-HX36
(Prefix)-12-36-HX36
49
49
49
49
1/4
1/4
1/4
1/4
104
110
116
122
1/2
1/2
1/2
1/2
24
30
36
(Prefix)-18-24-HX36
(Prefix)-18-30-HX36
(Prefix)-18-36-HX36
52
52
52
1/4
1/4
1/4
110
116
122
1/2
1/2
1/2
24
30
36
(Prefix)-24-30-HX36
(Prefix)-24-36-HX36
55
55
1/4
1/4
116
122
1/2
1/2
30
36
(Prefix)-30-36-HX36
58
1/4
122
1/2
in.
12
18
26
4" Reducers
4 System
Tray Width
Straight Reducer
A
W1
W2
in.
in.
(Prefix)-09-LR06
17 1/2
(Prefix)-09-SR06
16
(Prefix)-09-RR06
17 1/2
12
6
9
(Prefix)-12-LR06
(Prefix)-12-LR09
20 1/2
17 1/2
(Prefix)-12-SR06
(Prefix)-12-SR09
17 1/2
16
(Prefix)-12-RR06
(Prefix)-12-RR09
20 1/2
17 1/2
6
9
12
(Prefix)-18-LR06
(Prefix)-18-LR09
(Prefix)-18-LR12
26 1/2
23 1/2
20 1/2
(Prefix)-18-SR06
(Prefix)-18-SR09
(Prefix)-18-SR12
20 1/2
19
17 1/2
(Prefix)-18-RR06
(Prefix)-18-RR09
(Prefix)-18-RR12
26 1/2
23 1/2
20 1/2
6
9
12
18
(Prefix)-24-LR06
(Prefix)-24-LR09
(Prefix)-24-LR12
(Prefix)-24-LR18
32
29
26
20
1/2
1/2
1/2
1/2
(Prefix)-24-SR06
(Prefix)-24-SR09
(Prefix)-24-SR12
(Prefix)-24-SR18
23 1/2
22
20 1/2
17 1/2
(Prefix)-24-RR06
(Prefix)-24-RR09
(Prefix)-24-RR12
(Prefix)-24-RR18
32
29
26
20
1/2
1/2
1/2
1/2
6
9
12
18
24
(Prefix)-30-LR06
(Prefix)-30-LR09
(Prefix)-30-LR12
(Prefix)-30-LR18
(Prefix)-30-LR24
38
35
32
26
20
1/2
1/2
1/2
1/2
1/2
(Prefix)-30-SR06
(Prefix)-30-SR09
(Prefix)-30-SR12
(Prefix)-30-SR18
(Prefix)-30-SR24
26
25
23
20
17
(Prefix)-30-RR06
(Prefix)-30-RR09
(Prefix)-30-RR12
(Prefix)-30-RR18
(Prefix)-30-RR24
38
35
32
26
20
1/2
1/2
1/2
1/2
1/2
6
9
12
18
24
30
(Prefix)-36-LR06
(Prefix)-36-LR09
(Prefix)-36-LR12
(Prefix)-36-LR18
(Prefix)-36-LR24
(Prefix)-36-LR30
44
41
38
32
26
20
1/2
1/2
1/2
1/2
1/2
1/2
(Prefix)-36-SR06
(Prefix)-36-SR09
(Prefix)-36-SR12
(Prefix)-36-SR18
(Prefix)-36-SR24
(Prefix)-36-SR30
29
28
26
23
20
17
(Prefix)-36-RR06
(Prefix)-36-RR09
(Prefix)-36-RR12
(Prefix)-36-RR18
(Prefix)-36-RR24
(Prefix)-36-RR30
44
41
38
32
26
20
1/2
1/2
1/2
1/2
1/2
1/2
18
24
30
36
Catalog No.
in.
Catalog No.
27
in.
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
Catalog No.
in.
Vertical Tee
Up
Prefix - 06 - VT - 24
Radius
Fitting Type
Width
Insert fitting prefix to
complete catalog number
Tray
Width
in.
in.
6
9
12
18
24
30
36
12
24
36
Vertical Tee
Catalog No.
* (Prefix)-06-(*)12
* (Prefix)-09-(*)12
* (Prefix)-12-(*)12
* (Prefix)-18-(*)12
* (Prefix)-24-(*)12
* (Prefix)-30-(*)12
* (Prefix)-36-(*)12
6
9
12
18
24
30
36
(Prefix)-06-(*)24
(Prefix)-09-(*)24
(Prefix)-12-(*)24
(Prefix)-18-(*)24
(Prefix)-24-(*)24
(Prefix)-30-(*)24
(Prefix)-36-(*)24
6
9
12
18
24
30
(Prefix)-06-(*)36
(Prefix)-09-(*)36
(Prefix)-12-(*)36
(Prefix)-18-(*)36
(Prefix)-24-(*)36
(Prefix)-30-(*)36
Vertical Tee Up
A
B
in.
in.
in.
19 1/4
42 1/2
23 1/4
42 1/2
31
66
35
66
43
90
47
90
28
3 System
Seasafe Safety
Series Factor
3
1.5
29
-RBend
Radius
Tray
Width
in.
in.
12
6
9
12
18
24
-RBend
Radius
Tray
Width
in.
in.
12
6
9
12
18
24
90 Horizontal Bend
Dimensions
A
Catalog No.
in.
(Prefix)-06-90HB12
(Prefix)-09-90HB12
(Prefix)-12-90HB12
(Prefix)-18-90HB12
(Prefix)-24-90HB12
Catalog No.
(Prefix)-06-45HB12
(Prefix)-09-45HB12
(Prefix)-12-45HB12
(Prefix)-18-45HB12
(Prefix)-24-45HB12
20
21
23
26
29
3/8
7/8
3/8
3/8
3/8
in.
20
21
23
26
29
3/8
7/8
3/8
3/8
3/8
45 Horizontal Bend
Dimensions
A
B
in.
22
23
24
27
29
13/16
7/8
7/8
3/16
9
9
10
11
12
7/16
7/8
5/16
3/16
1/16
-RBend
Radius
Tray
Width
in.
in.
12
6
9
12
18
24
Horizontal Tee
Dimensions
A
Catalog No.
in.
(Prefix)-06-HT12
(Prefix)-09-HT12
(Prefix)-12-HT12
(Prefix)-18-HT12
(Prefix)-24-HT12
19
20
22
25
28
in.
1/4
3/4
1/4
1/4
1/4
B
in.
38
41
44
50
56
30
1/2
1/2
1/2
1/2
in.
13
14
14
15
17
3/8
5/8
7/8
1/8
3 System
-RBend
Radius
Tray
Width
in.
in.
6
9
12
18
24
12
-RTray
Bend Width
Radius
in.
in.
12
6
9
12
18
24
90
Catalog No.
(Prefix)-06-90(*)12
(Prefix)-09-90(*)12
(Prefix)-12-90(*)12
(Prefix)-18-90(*)12
(Prefix)-24-90(*)12
in.
in.
20 15/16
20 15/16
26 15/16
in.
26 15/16
45
Catalog No.
(Prefix)-06-45(*)12
(Prefix)-09-45(*)12
(Prefix)-12-45(*)12
(Prefix)-18-45(*)12
(Prefix)-24-45(*)12
in.
20 1/2
8 1/2
31
in.
13 1/4
22 5/8
in.
9 3/8
in.
13 1/4
-RBend
Radius
Tray
Width
in.
in.
12
6
9
12
18
24
Horizontal Bend
Dimensions
A
Catalog No.
in.
(Prefix)-06-45HX12
(Prefix)-09-45HX12
(Prefix)-12-45HX12
(Prefix)-18-45HX12
(Prefix)-24-45HX12
19
20
22
25
28
1/4
3/4
1/4
1/4
1/4
B
in.
38
41
44
50
56
1/2
1/2
1/2
1/2
1/2
3" Reducers
Tray Width
W1
in.
W2
in.
Straight Reducer
A
in.
Catalog No.
in.
A
in.
(Prefix)-09-LR06
17 1/2
(Prefix)-09-SR06
16
(Prefix)-09-RR06
17 1/2
12
6
9
(Prefix)-12-LR06
(Prefix)-12-LR09
20 1/2
17 1/2
(Prefix)-12-SR06
(Prefix)-12-SR09
17 1/2
16
(Prefix)-12-RR06
(Prefix)-12-RR09
20 1/2
17 1/2
6
9
12
(Prefix)-18-LR06
(Prefix)-18-LR09
(Prefix)-18-LR12
26 1/2
23 1/2
20 1/2
(Prefix)-18-SR06
(Prefix)-18-SR09
(Prefix)-18-SR12
20 1/2
19
17 1/2
(Prefix)-18-RR06
(Prefix)-18-RR09
(Prefix)-18-RR12
26 1/2
23 1/2
20 1/2
6
9
12
18
(Prefix)-24-LR06
(Prefix)-24-LR09
(Prefix)-24-LR12
(Prefix)-24-LR18
32
29
26
20
(Prefix)-24-SR06
(Prefix)-24-SR09
(Prefix)-24-SR12
(Prefix)-24-SR18
23 1/2
22
20 1/2
17 1/2
(Prefix)-24-RR06
(Prefix)-24-RR09
(Prefix)-24-RR12
(Prefix)-24-RR18
32
29
26
20
18
24
1/2
1/2
1/2
1/2
32
1/2
1/2
1/2
1/2
Tray Width
W1
W2
(Prefix)-09-06-HX12
in.
41 1/2
(Prefix)-12-06-HX12
(Prefix)-12-09-HX12
19
20
1/4
3/4
44
44
1/2
1/2
6
9
12
(Prefix)-18-06-HX12
(Prefix)-18-09-HX12
(Prefix)-18-12-HX12
19
20
22
1/4
3/4
1/4
50
50
50
1/2
1/2
1/2
6
9
12
18
(Prefix)-24-06-HX12
(Prefix)-24-09-HX12
(Prefix)-24-12-HX12
(Prefix)-24-18-HX12
19
20
22
25
1/4
3/4
1/4
1/4
56
56
56
56
1/2
1/2
1/2
1/2
in.
6
12
6
9
24
3 System
A
in.
19 1/4
in.
9
18
12" Radius
Catalog No.
-RTray
Bend Width
Radius
in.
in.
12
6
9
12
18
24
Vertical Tees
Catalog No.
(Prefix)-06-(*)12
(Prefix)-09-(*)12
(Prefix)-12-(*)12
(Prefix)-18-(*)12
(Prefix)-24-(*)12
23 15/16
33
in.
50 7/8
Vertical Tee Up
A
B
in.
26 15/16
in.
50 7/8
Tray Width
W1
W2
Prefix -18 - 12 HT 24
Radius
Fitting Type
Width2
Width1
Insert fitting prefix to
complete catalog number
12" Radius
Catalog No.
B
in.
38 1/2
in.
9
in.
6
(Prefix)-09-06-HT12
in.
20 3/4
12
6
9
(Prefix)-12-06-HT12
(Prefix)-12-09-HT12
22
22
1/4
1/4
38
41
1/2
1/2
6
9
12
(Prefix)-18-06-HT12
(Prefix)-18-09-HT12
(Prefix)-18-12-HT12
25
25
25
1/4
1/4
1/4
38
41
44
1/2
1/2
1/2
6
9
12
18
(Prefix)-24-06-HT12
(Prefix)-24-09-HT12
(Prefix)-24-12-HT12
(Prefix)-24-18-HT12
28
28
28
28
1/4
1/4
1/4
1/4
38
41
44
50
1/2
1/2
1/2
1/2
18
24
Tray Width
W1
W2
(Prefix)-06-09-HT12
(Prefix)-12-12-HT12
(Prefix)-06-18-HT12
(Prefix)-06-24-HT12
in.
19 1/4
19 1/4
19 1/4
19 1/4
in.
41 1/2
44 1/2
50 1/2
56 1/2
12
18
24
(Prefix)-09-12-HT12
(Prefix)-09-18-HT12
(Prefix)-09-24-HT12
20
20
20
3/4
3/4
3/4
44
50
56
1/2
1/2
1/2
12
18
24
(Prefix)-12-18-HT12
(Prefix)-12-24-HT12
22
22
1/4
1/4
50
56
1/2
1/2
18
24
(Prefix)-18-24-HT12
25
1/4
56
1/2
in.
6
Prefix -18 - 24 HT 12
Radius
Fitting Type
Width2
Width1
Insert fitting prefix to
complete catalog number
12" Radius
Catalog No.
in.
9
12
18
24
34
Non-Ventilated
Ventilated
Polyester
FCCVP-02-120
FCCVP-02-240
FCCVP-03-120
FCCVP-03-240
FCCVP-04-120
FCCVP-04-240
FCCVP-06-120
FCCVP-06-240
FCCVP-08-120
FCCVP-08-240
Vinyl Ester
FCCVV-02-120
FCCVV-02-240
FCCVV-03-120
FCCVV-03-240
FCCVV-04-120
FCCVV-04-240
FCCVV-06-120
FCCVV-06-240
FCCVV-08-120
FCCVV-08-240
Width
in.
2
2
3
3
4
4
6
6
8
8
Length
ft.
10
20
10
20
10
20
10
20
10
20
Height
in.
Polyester
FCCNP-02-120
FCCNP-02-240
FCCNP-03-120
FCCNP-03-240
FCCNP-04-120
FCCNP-04-240
FCCNP-06-120
FCCNP-06-240
FCCNP-08-120
FCCNP-08-240
1 1/8
1 5/8
2 3/16
Vinyl Ester
FCCNV-02-120
FCCNV-02-240
FCCNV-03-120
FCCNV-03-240
FCCNV-04-120
FCCNV-04-240
FCCNV-06-120
FCCNV-06-240
FCCNV-09-120
FCCNV-08-240
Width
in.
2
2
3
3
4
4
6
6
8
8
Length
ft.
10
20
10
20
10
20
10
20
10
20
Height
in.
1
1 1/8
1 5/8
2 3/16
Horizontal
3"series
4"series
90
FCCNP-03-90HB12 FCCNP-04-90HB12
45
FCCNP-03-45HB12 FCCNP-04-45HB12
Vertical
90
45
3"series
FCCNP-03-90V*12
FCCNP-03-45V*12
4"series
FCCNP-04-90V*12
FCCNP-04-45V*12
6"series
FCCNP-06-90HB12
FCCNP-06-45HB12
8"series
FCCNP-08-90HB12
FCCNP-08-45HB12
6"series
FCCNP-06-90V*12
FCCNP-06-45V*12
8"series
FCCNP-08-90V*12
FCCNP-08-45V*12
35
Cable Channel
Horizontal Crosses
Catalog
No.
FCCNP-03-HT12
FCCNP-04-HT12
FCCNP-06-HT12
FCCNP-08-HT12
Width
in.
3
4
6
8
Catalog
No.
FCCNP-03-HX12
FCCNP-04-HX12
FCCNP-06-HX12
FCCNP-08-HX12
Catalog No.
XSS-1001 SS6
Catalog No.
XSS-1011 SS6
Catalog No.
XSS-1901H SS6
Catalog No.
XSS-1451H SS6
Catalog No.
XSS-1301H SS6
Catalog No.
XSS-1901V SS6
Catalog No.
XSS-1451V SS6
Catalog No.
XSS-1301V SS6
36
Width
in.
3
4
6
8
Accessories
Part Number with Hardware Explanation
Examples:
XSS-0000*
* Indicates that additional information must be furnished to specify the type of hardware.
Hardware Option
replace * with
Example
Monel
MO
Silicon Bronze
SB
XSS-4003: pair of 4-hole splice plates for 3" system without hardware
XSS-4004 SS6: pair of 4-hole splice plates for 4" system with stainless steel hardware
XSS-8006 SB: pair of 8-hole splice plates for 6" system with silicon bronze hardware
Height
6"
4"
3"
Catalog No.
XSS-8006*
XSS-4004*
XSS-4003*
Height
Catalog No.
6"
XSS-8016*
4"
XSS-4014*
3"
XSS-4013*
* hardware suffix needed to complete part number
Material
Height
Catalog No.
6"
XSS-8026*
4"
XSS-4024*
3"
XSS-4023*
* hardware suffix needed to complete part number
Not available in FRP.
Stainless
Steel
Catalog No.
XFP-8056*
XFP-4054*
XFP-4053*
Material
Height
Catalog No.
6"
XSS-8036*
Stainless
4"
XSS-4034*
Steel
3"
XSS-4033*
* hardware suffix needed to complete part number
Not available in FRP.
Material
Height
Catalog No.
6"
XBE-1086-W*
Fiberglass
4"
XBE-1084-W*
3"
XBE-1083-W*
* hardware suffix needed to complete part number
Height
Catalog No.
6" to 3"
XSS-8063*
Stainless
6" to 4"
XSS-8064*
Steel
4" to 3"
XSS-4043*
* hardware suffix needed to complete part number
Not available in FRP.
37
Accessories
FRP
Material
Stainless
Steel
Material
Fiberglass
FR
Accessories
Horizontal and Vertical Splice Plates
* Hardware suffix needed to complete part number
All splice plate hardware is 3/8".
Hardware Suffix:
SS6 - 316SS
MO - Monel
SB - Silicon Bronze
FR - Fiberglass
Catalog No.
90
Catalog No.
45
Catalog No.
30
XSS-8906H*
XSS-4904H*
XSS-4903H*
XSS-8456H*
XSS-4454H*
XSS-4453H*
XSS-8306H*
XSS-4304H*
XSS-4303H*
Catalog No.
90
Catalog No.
45
Catalog No.
30
XSS-8906V*
XSS-4904V*
XSS-4903V*
XSS-8456V*
XSS-4454V*
XSS-4453V*
XSS-8306V*
XSS-4304V*
XSS-4303V*
38
Accessories
Barriers
Ladder Drop-Out
Specially-designed Ladder Drop-Outs provide a rounded surface
with adequate radius to protect cable as it exists from the tray,
preventing damage to insulation.
4" radius
Cat. No. XF-1104-W
W = tray width
Side Rail
Height
6"
4"
3"
Kit Contents:
Catalog
No.
Side Rail
Height
Loading
Depth 'H'
BS06P - 90HBFL
BS04P - 90HBFL
BS03P - 90HBFL
6"
4"
3"
4 11/16
2 11/16
1 3/4
Clamp/Guide - Fiberglass
Cat. No. XF-1208 - nonmetallic
design for 3/8" hardware - not included
combination hold down clamp and guide
sold in pairs
Vertical Barriers
BS06 P - 90 VO 24
Spray Sealant
Catalog No.
8-2-Seal
8-2-Seal-QT
Pint
1 Quart
Contents: Resin, Catalyst, Stir Stick
and Applicator.
Clear-1215
39
Accessories
Radius
VI or VO
Angle
Material
Barrier Size
Accessories
Material Thickness: 1/8"
Cover Length: 120" (10')
Standard Mounting Hardware: (10 each) #10 x 1/2" stainless, self drilling screws
provided with each section
Covers
FC - P - W*
- 120
Length or fitting description
Width
Material
Type Cover
FC FC PC PC -
P
V
P
V
- W* - 120
- W* - 120
- W* - 120
- W* - 120
=
=
=
=
Flat polyester
Flat vinylester
Peaked polyester
Peaked vinylester
Covers Clamps
Heavy Duty Cover Clamp
Recommended for outdoor service.
* W = tray width
Side Rail
Height
6"
4"
3"
Catalog
No.
XWC-P-W*-9064
XWC-P-W*-9044
XWC-P-W*-9034
40
41
Weight
lbs. / ft.
kg / m
SSP-100
Polyester
Solid Back
Gray
.47
.70
SSV-100
Vinylester
Solid Back
Beige
.47
.70
SSP-100-D
Polyester
Solid Back
Gray
.86
1.28
SSV-100-D
Vinylester
Solid Back
Beige
.86
1.28
Part No.
Weight
lbs. / ft.
kg / m
SSP-158
Polyester
Solid Back
Gray
.63
.94
SSV-158
Vinylester
Solid Back
Beige
.63
.94
SSP-158-D
Polyester
Solid Back
Gray
1.17
1.75
SSV-158-D
Vinylester
Solid Back
Beige
1.17
1.75
Part No.
Weight
lbs. / ft.
kg / m
SSP-100-H
Polyester
Holes in Back
Gray
.45
.67
SSV-100-H
Vinylester
Holes in Back
Beige
.45
.67
SSP-158-H
Polyester
Holes in Back
Gray
.61
.91
SSV-158-H
Vinylester
Holes in Back
Beige
.61
.91
Part No.
kg / m
Polyester
Slots in Back
Gray
.46
.69
SSV-100-S
Vinylester
Slots in Back
Beige
.46
.69
SSP-158-S
Polyester
Slots in Back
Gray
.62
.93
SSV-158-S
Vinylester
Slots in Back
Beige
.62
.93
SSP-158-I
Polyester
SSV-158-I
Vinylester
Concrete
Insert
Concrete
Insert
on center
Weight
lbs. / ft.
SSP-100-S
Part No.
Weight
lbs. / ft.
kg / m
Gray
1.04
1.55
Beige
1.04
1.55
42
Concrete
Insert
Part
No.
Maximum
Allowable
Beam Load
Deflection
at Maximum
Allowable
Beam Load
1/360 Span
lbs.
in.
mm
lbs.
lbs.
12
(305)
SSP-100
SSP-100-D
SSP-158
SSP-158-D
793
2301
1783
5172
3527
10235
7931
23005
0.106
0.060
0.067
0.037
2.69
1.52
1.70
.94
373
1928
1327
5172
1659
8576
5902
23005
249
1285
885
4696
1107
5715
3936
20888
24
(609)
SSPP-100
SSP-100-D
SSP-158
SSP-158-D
397
1150
891
2586
1766
5115
3963
11502
0.425
0.239
0.269
0.147
10.79
6.07
6.83
3.73
93
482
332
1761
413
2144
1477
7833
62
321
221
1174
276
1428
983
5222
36
(914)
SSP-100
SSP-100-D
SSP-158
SSP-158-D
264
767
594
1724
1174
3411
2642
7668
0.957
0.537
0.604
0.330
24.31
13.64
15.34
8.38
41
214
147
783
182
952
654
3483
28
143
98
522
124
636
436
2322
Part
No.
Maximum
Allowable
Beam Load
Deflection
at Maximum
Allowable
Beam Load
1/360 Span
lbs.
in.
mm
lbs.
lbs.
SSV-100
SSV-100-D
SSV-158
SSV-158-D
988
2866
2221
6443
4394
12748
9879
28658
0.112
0.063
0.071
0.039
2.84
1.60
1.80
.99
441
2279
1569
6443
1961
10137
6979
28658
294
1519
1046
5550
1308
6756
4652
24686
24
(609)
SSV-100
SSV-100-D
SSV-158
SSV-158-D
494
1433
1110
3221
2197
6374
4937
14327
0.448
0.252
0.283
0.155
11.38
6.40
7.19
3.94
110
570
392
2081
489
2535
1743
9256
73
380
261
1387
325
1690
1161
6169
36
(914)
SSV-100
SSV-100-D
SSV-158
SSV-158-D
329
955
740
2148
1463
4248
3291
9554
1.009
0.566
0.637
0.348
25.63
14.37
16.18
8.84
49
253
174
925
218
1125
774
4114
33
169
116
617
147
752
516
2744
Recommended Guideline:
Temperature
75 F (24 C)
100 F (38 C)
125 F (52 C)
150 F (66 C)
175 F (79 C)
200 F (93 C)
43
Strut
12
(304)
Part No.
Weight / C
in-lbs
N-m
lbs.
845
30
3.4
.4
181
F516100 5/16 x 1
5/16 - 18
190
5/16 - 18
190
845
30
3.4
.4
181
F38100 3/8 x 1
3/8 - 16
300
1334
45
5.1
.9
408
3/8 - 16
300
1334
45
5.1
1.1
499
3/8 - 16
300
1334
45
5.1
1.5
680
F12100 1/2 x 1
1/2 - 13
490
2180
110
12.4
1.4
635
1/2 - 13
490
2180
110
12.4
1.8
816
1/2 - 13
490
2180
110
12.4
3.7
1678
Part No.
Thread Size
Weight / C
in.
mm
lbs.
F38HN
3/8 - 16
21/64
.3
136
F12HN
1/2 - 13
7/16
11
.7
318
F58HN
5/8 - 11
35/64
14
1.4
635
Hex Nut
Part No.
in-lbs
Weight / C
N-m
lbs.
F38AT
3/8 - 16
425
1890
45
5.1
.08
36
F12AT
1/2 - 13
750
3336
110
12.4
.13
59
F58AT
5/8 - 11
950
4226
230
26.0
.21
95
All-Thread Rod
Safety Factor of 3 on Design Load. Note: 3/4 & 1 sizes are available.
Part No.
Thread Size
Weight / C
in.
mm
lbs.
F38ATHN
3/8 - 16
3/4
19
.8
376
F12ATHN
1/2 - 13
7/8
22
1.7
771
All-Thread Rod
Hex Nut
Part No.
Thread Size
Weight / C
lbs.
7.4
FRC38
3/8 - 16
3357
FRC12
1/2 - 13
11.3
5118
FRC58
5/8 - 11
16.7
7575
Rod Coupler
44
Part No.
Patent # 5,205,022
Load
A
Load
B
Design Load A
in.
mm
lbs.
lbs.
in.- lbs.
N-m
lbs.
FUB050
1/2
15
300
1334
150
667
30
3.4
3.5
1588
FUB075
3/4
20
300
1334
150
667
30
3.4
3.9
1769
FUB100
25
300
1334
150
667
30
3.4
4.4
1996
FUB114
1-1/4
32
300
1334
150
667
30
3.4
4.8
2177
FUB112
1-1/2
40
300
1334
150
667
30
3.4
5.2
2359
FUB200
50
600
2669
200
890
60
6.8
7.7
3493
FUB212
2-1/2
65
600
2669
200
890
60
6.8
10.2
4627
FUB300
80
600
2669
200
890
60
6.8
12.6
5715
FUB312
3-1/2
90
600
2669
200
890
60
6.8
15.1
6849
FUB400
100
600
2669
200
890
60
6.8
17.6
7983
Part No.
Part No.
w/spring
w/o spring
Thread
Pull-Out
lbs.
in.- lbs.
N-m
lbs.
FCN38
FCN38WO
3/8 16
300
1334
150
667
200
22.6
2.3
1043
FCN12
FCN12WO
1/2 13
300
1334
150
667
200
22.6
2.3
1043
Safety Factor of 3 on Design Load. Note: 1/4 & 5/16 sizes are available.
Part No.
Hole Size
Weight / C
in.
lbs.
F38W
3/8
.5
227
F12W
1/2
.5
227
F58W
5/8
.5
227
F34W
3/4
.5
227
F100W
.5
227
Flat Washer
Channel Nut
Channel Nut
w/ Spring
SPRAY SEALANT
To reseal fiberglass after field modifications.
Catalog No. Clear-1215
12 fl. oz. spray acrylic
45
Strut
Pipe Clamps
Part No.
Design Load
Max. Torque
in.
mm
in.
mm
lbs.
in.- lbs.
N-m
SAPC050
1/2 to 3/4
15, 20
75 to 1.05
19 to 28
75
.33
15
1.69
SAPC100
1 to 1-1/2
25, 40
1.05 to 1.90
29 to 48
150
.67
22
2.48
SAPC112
1-1/2 to 2-1/2
40, 65
1.90 to 2.87
48 to 73
150
.67
22
2.48
SAPC212
2-1/2 to 3-1/2
65, 90
2.87 to 4.0
73 to 101
150
.67
22
2.48
NOT
RECOMMENDED
for Vertical Installation
Without Additional Supports
Part No.
Design Load
Max. Torque
in.
mm
lbs.
in.-lbs.
N-m
SRPC050
1/2
15
300
1.33
10
1.13
SRPC075
3/4
20
300
1.33
10
1.13
SRPC100
25
300
1.33
10
1.13
SRPC114
1-1/4
32
300
1.33
10
1.13
SRPC112
1-1/2
40
300
1.33
10
1.13
SRPC200
50
300
1.33
10
1.13
SRPC212
2-1/2
65
300
1.33
10
1.13
SRPC300
80
300
1.33
10
1.13
SRPC312
3-1/2
90
300
1.33
10
1.13
SRPC400
100
300
1.33
10
1.13
NOT
RECOMMENDED
for Vertical
Installation Without
Additional Supports
46
Nominal
Pipe Size
Maximum
Pipe O.D.
Hanger
Rod Size
Design
Load
in.
mm
in.
mm
SCH200
50
2-1/2
63
SCH212
2-1/2
65
3-1/4
82
1/2 - 13
120
.54
SCH300
80
3-7/8
98
1/2 - 13
160
.71
SCH400
100
127
5/8 - 11
250
1.12
SCH600
150
177
5/8 - 11
400
1.79
SCH800
200
228
5/8 - 11
450
2.01
SCH1000
10
250
11-3/8
289
5/8 - 11
500
2.24
SCH1200
12
300
13-1/2
342
5/8 - 11
600
2.69
1/2 - 13
lbs.
90
.40
Clevis Hangers
Support Brackets
Part No.*
SB 1
Dimension A
Design Load
in.
mm
lbs.
SB1-06P
10
250
1400
6.22
SB1-09P
13
330
1000
4.45
SB1-12P
16
406
800
3.56
SB1-18P
22
559
675
3.00
SB1-24P
28
711
450
2.00
SB2-24P
28
711
750
3.33
SB2-30P
34
863
750
3.33
SB2-36P
40
1016
750
3.33
SB 2
Beam Clamp
Part No.
SBC
SBC-RC
Description
Design Load
lbs. / ft.
kg / m
Beam Clamp
800
3.56
800
3.56
Strut
47
Fittings
SFP-1S7
SFP-1S9
SFP-2S
SFP-3S
SFP-4S
SFP-5S
SFP-3HL
SFP-4HL
SFP-4HT
SFP-5HX
SFP-3HCG
SFP-4HCG
SFP-5HCG
SFP-3HTG
SFP-4HTG
SFP-5HTG
All fittings are 1-5/8 (41) wide and 1/4 (6) thick unless specified otherwise. All holes are 13/32 (10) diameter unless specified otherwise.
48
Fittings
SFP-6HTG
SFP-7HXG
SFP-3VL
SFP-4VL
SFP-4VLD
SFP-4VGL
SFP-4VGR
SFP-4VTG
Double Base
Single Base
SSV-DBase
SSV-SBase
Window Clamp
SFP-3CB
SWC-158
Strut
49
Fabrication Services
Seasafe custom structural fabrication provides the solution to your corrosion problems.
You get high-strength, light-weight, low maintenance fiberglass reinforced composite
products to compensate for the shortcomings of conventional materials. Pound for
pound, FRP structural shapes are stronger than steel.
STRUCTURAL SHAPES
In-house fiberglass pultrusion
technology enables Seasafe to
present an extensive line of FRP
structural shapes. Standard
configurations include angle,
channel, square tube, round tube,
solid bar, flat sheet, wide flange
beam and I-beam. All are readily
available in a wide range of sizes
and thicknesses.
Features of
Fiberglass Materials
Corrosion Resistant
High Strength
Light weight
Low Maintenance
Low Life-Cycle Cost
Electrically Non-Conductive
Fire Retardant
Ultra-Violet Protection
Low Thermal Conductivity
Non-Magnetic
Dimensional Stability
Easy Assembly
Industries Served
Handrails
Food Processing
Chemical Processing
Water/Waste Water Treatment
Recreational/Leisure
Metal Finishing
Military/Government
Beverage
Utilities
Oil & Gas
Marine
Mining/Refining
Pharmaceuticals
Pulp & Paper
Transportation
Pultruded Grating
Molded Grating
Custom Fabrication
RESIN SYSTEMS
Seasafe FRP products are available in standard corrosion
resistant isophthalic polyester or premium vinyl ester resin
systems. Both resins include UV inhibitors and are Class 1 Fire
Retardant per ASTM E84.
50
WHY SEASAFE? We were the only bidder to actually walk the project and provide valuable design and
logistical input. Through use of innovative manufacturing techniques and logistics support, we reduced the amount
of the erectors bid by $370,000. And we provided a full-time project manager to ensure its success.
VIDEO
AVAILABLE
GRATING
GatorDeck Pultruded Grating Competitively
priced ideal for long spans
GatorGrate
Molded Grating
Fabricated
GatorGrate
GatorPlate Molded
Floor Plate
Seasafe Covered
Grating
Cable Tray
Systems
GatorDeck Pultruded
Stair Treads
GatorGrate Molded
Stair Treads
Seasafe Pultruded
Handrails
Seasafe Ladders
& Caged Ladders
Fabricated Structural
Shapes
FLOOR PLATE
GatorPlate Floor Plate Anti-slip surface for
slippery spots or large areas
GatorGrate Covered Grating Combines
grating and floor plate in one integral panel
www.seasafe.com
Represented by:
Seasafe, Inc.
209 Glaser Drive - Lafayette, LA 70508
Toll Free: 800-326-8842 Fax: 337-406-8880
e-mail: seasafe@seasafe.com - Homepage: www.seasafe.com
products are made in the U.S.A.
All trade names mentioned herein are registered trade marks of Seasafe, Inc. unless otherwise designated.