Sei sulla pagina 1di 9

TheFirearmsForum.

com
FOUNDED: February 9, 2001
The Firearms Forum - Gun Community > Firearms > Black Powder Shooting / Muzzleloaders / Handguns
If you prefer to make a donation by check, send an email to Support for the mailing address.

User Name User Name Password

Remember Me? Log in Chat Room

Tap-O-Cap Drawings
Register Notices FAQ Calendar Today's Posts

Search

Congratulations to our April giveaway winners! Thanks also to the folks who contributed items for our giveaways! Watch for future giveaways in our forums!

Thread Tools 10-17-2010, 02:43 PM #1 Tap-O-Cap Drawings

ofitg

Advanced Senior Member

This is an attempt to provide a physical description of the Tap-O-Cap die. I apologize for the crude artwork, and I regret that I cannot provide more precise measurements with the equipment at my disposal. I am hoping that with a little luck, this might be good enough for a skilled machinist to fabricate a working copy of the Tap-O-Cap. Note - all dimensions are in inches.

Join Date: Feb 2010 C ontributor Posts: 1,447

The Tap-O-Cap die consists of two major components - for lack of better terminology, I will refer to them as the cylinder (left) and the piston (right) -

The Cylinder is all-steel construction, closed at one end. A 0.157-inch diameter steel rod is mounted (apparently pressed) into the closed end.

A thin slot is cut into the side of the cylinder, immediately forward of the steel rod. This slot is cut most of the way through the cylinder's diameter. The next photo shows a paper card inserted into this slot.

The piston is all-steel construction. It consists of a hollow shaft with a knob screwed onto one end, and a set of teeth on the other end (vaguely resembling a hole saw).

At the base of the teeth, the inner diameter of the shaft is 0.31 inches. This tapers down to a 0.21-inch constriction, and then opens up again to 0.245 inner diameter. There are 12 teeth, arranged in six pairs. The pairs are separated by pronounced

notches. Evidently this arrangement enables the die to fold thin sheet aluminum into #11 caps - the skirts of the caps might be described as hexagonal in cross-section.

-->

10-17-2010, 04:56 PM

#2 Re: Tap-O-Cap Drawings

jack404

Former Guest Join Date: Jan 2010 Location: Australia C ontributor Posts: 17,622

If i may , i think the reason for the two sets of teeth are to fold the metal thats punched out to the final shape , every second fold around the final cap is beautifully rounded and the next folded under i'll try to take a pic again ( tried before but crap cam did not play ) and show this . Oftig , i have the dang thing here and i could not have gotten all that info as concise as you have it here thanks a heap ( swiped ) cheers again eh

it really is a work of art

10-17-2010, 07:45 PM

#3 Re: Tap-O-Cap Drawings

jack404

Former Guest Join Date: Jan 2010 Location: Australia C ontributor Posts: 17,622

heres a close up of a few fresh punched caps you'll see just how elegant it really is
Attached Thumbnails

10-17-2010, 08:38 PM

#4 Re: Tap-O-Cap Drawings

ofitg

Advanced Senior Member

Wow, I never really noticed that before. Yes sir, that's elegant! It's sad that Forster stopped manufacturing these gizmos. Now they will become "collectors items".....

Join Date: Feb 2010 C ontributor Posts: 1,447

10-20-2010, 02:33 PM

#5 Re: Tap-O-Cap Drawings

armedandsafe
Former Guest

This is what I needed. Now to find some time to get the mill and lathe going.

Pops
Join Date: Dec 2002 Location: Moses Lake, WA Posts: 10,344

10-20-2010, 09:05 PM

#6 Re: Tap-O-Cap Drawings

armedandsafe
Former Guest

I hit the machine shop today to get some advice. It looks as if: The recessed cylinder rod is 5/32" drill rod. (0.46875") The cylinder opening is 7/16". (0.4375") The handle (knob) of the piston could be cut to slide into a shell holder on a reloading press and the cylinder could be made 7/8"-14 to screw into the plunging arm. Question: what size diameter is the punched cap? I'm not going to get on this for awhile, as I'm a little swamped just now. Maybe after the turn of the year. Pops
Last edited by armedandsafe; 10-20-2010 at 09:52 PM..

Join Date: Dec 2002 Location: Moses Lake, WA Posts: 10,344

Previous Thread | Next Thread Posting Rules You You You You may may may may not not not not post new threads post replies post attachments edit your posts

BB code is On Smilies are On [IMG] code is On

HTML code is Off Forum Rules

Forum Jump Black Powder Shooting / Muzzleloaders / Handguns Go

All times are GMT -5. The time now is 07:57 AM.

STILL SEARCHING FOR SOMETHING? TRY THE TFF "GOOGLE" SEARCH ENGINE BELOW!
Google Search

-- OD Green and Tan

Contact Us - The Firearms Forum - Gun Community - Archive - Top C opyright 2002 - 2013, TheFirearmsForum.C om

Potrebbero piacerti anche