Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Main counter
Sub counter
VS.RAB.AbnormRel.CS.RF.SRBReset VS.RAB.AbnormRel.CS.RF.ULSync
VS.RAB.AbnormRel.CS.RF VS.RAB.AbnormRel.CS.RF.UuNoReply
VS.RAB.AbnormRel.CS.IuAAL2 VS.RAB.AbnormRel.CS.OLC
2014-1-31
1 , 4
Main counter
Sub-counter
VS.RAB.AbnormRel.PS.RF.SRBReset VS.RAB.AbnormRel.PS.RF.ULSync
VS.RAB.AbnormRel.PS.OLC
2. Common Reason
Call drop for abnormal reasons Failure reason VS.RAB.AbnormRel.CS.OM VS.RAB.AbnormRel.CS.Preempt VS.RAB.AbnormRel.CS.UTRANgen VS.RAB.AbnormRel.CS.IuAAL2 VS.RAB.AbnormRel.CS.OLC VS.RAB.AbnormRel.PS.GTPULoss Common reason Caused by some risk operation Check whether congestion Check alarms Check IUCS transmission configuration and alarm. Check RTWP / congestions Check IUPS transmission alarms
For RF reasons: VS.RAB.AbnormRel.CS.RF.SRBRes et VS.RAB.AbnormRel.CS.RF.ULSync VS.RAB.AbnormRel.CS.RF.UuNoRe ply UL limited, check RTWP, check UE TX power Check missing neighbor, coverage Check missing neighbors, alarms, coverage
2014-1-31
2 , 4
Optimization SOP for RF reason call drops 1. check alarms 2. Using Nastar to check missing neighbors/ pilot pollution 3. Using the Naster to check the coverage of the cells.
How to solve the call drops if the cell located in weak coverage area/network edge? 1. Identify whether RF tuning is required or not (if some area a lot sites around but still coverage not good then RF tuning is required) 2. Modify the handover threshold/cell reselection parameters, let UE come to 2G quickly when 3G coverage become bad. 3. If UL limited, change the CPICH power or down tilt.
MML reference for Call drop optimization: MOD UCELLSELRESEL: CellId=13041, QualMeas=CPICH_ECNO, QrxlevminExtSup=FALSE, IdleSintrasearch=7, SsearchRat=4, NonhcsInd=NOT_CONFIGURED; UE will do intra-cell reselection when 3G EcIo is below -4dB, will do inter-RAT cell reselection when 3G EcIo is below -10dB.
ADD UCELLINTERRATHOCOV: CellId=13041, InterRatReportMode=PERIODICAL_REPORTING, InterRATCSThd2DEcN0=-10, InterRATCSThd2FEcN0=-8, InterRATCSThd2DRSCP=-95, InterRATCSThd2FRSCP=-92; UE will start compress mode when 3G EcIo is below -10 or RSCP is below -92.
MOD UPCPICHPWR: CellId=13451, MaxPCPICHPower=370, MinPCPICHPower=320; MOD UCELL: CellId=13451, PCPICHPower=340; Change the Cell CPICH power from 36dBm to 34dBm.
2014-1-31
3 , 4
2014-1-31
4 , 4