Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1.2 2. 2.1
Relevant identified uses of the substance or mixture and uses advised against
Identified uses
HAZARDS IDENTIFICATION Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Flammable liquids (Category 3) Acute toxicity, Inhalation (Category 1) Skin irritation (Category 2) Eye irritation (Category 2) Skin sensitization (Category 1) Specific target organ toxicity - single exposure (Category 3)
2.2
Flammable. Very toxic by inhalation. Irritating to eyes, respiratory system and skin. May cause sensitization by skin contact. Keep container tightly closed and in a well-ventilated place. Keep away from sources of ignition - No smoking. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of water.
S36/37 S45
Wear suitable protective clothing and gloves. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
2.3 3. 3.1
Di(tert-butyl) carbonate
CAS-No. EC-No.
4. 4.1
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
4.2
4.3 5. 5.1
Further information
Use water spray to cool unopened containers.
ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures
Wear respiratory protection. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas.
6.2 6.3
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
6.4 7.
7.1
7.2
7.3
8. 8.1 8.2
EXPOSURE CONTROLS/PERSONAL PROTECTION Control parameters Components with workplace control parameters Exposure controls Appropriate engineering controls
Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product.
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Splash protection Material: Nitrile rubber Minimum layer thickness: 0,4 mm Break through time: > 30 min Material tested:Camatril? ( Z677442, Size M) data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 873000, e-mail sales@kcl.de, test method: EN374 If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an Industrial Hygienist familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.
Body Protection
Complete suit protecting against chemicals, Flame retardant antistatic protective clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
9. 9.1
PHYSICAL AND CHEMICAL PROPERTIES Information on basic physical and chemical properties
a) Appearance b) Odour c) Odour Threshold Form: clear Colour: colourless no data available no data available
Flammability (solid, gas) no data available Upper/lower no data available flammability or explosive limits no data available no data available 0,95 g/cm3 at 25 C no data available no data available no data available no data available no data available no data available no data available
k) Vapour pressure l) Vapour density m) Relative density n) Water solubility o) Partition coefficient: noctanol/water p) Autoignition temperature q) Decomposition temperature r) Viscosity s) Explosive properties t) Oxidizing properties
9.2
Skin corrosion/irritation
no data available
Carcinogenicity
IARC:
No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Aspiration hazard
no data available
Potential health effects Inhalation May be fatal if inhaled. Causes respiratory tract irritation. Ingestion May be harmful if swallowed. Skin May be harmful if absorbed through skin. Causes skin irritation. Eyes Causes serious eye irritation. Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.
Additional Information
RTECS: HT0230000
Contaminated packaging
Dispose of as unused product.
15.
REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
16.