Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Nominal size: TLF I; II; III 1 - 25 to 8 - 250 Connections up to DN 250 Operating temperature 20 to +100
H7623
Table of contents
Content Application Design, maintenance intervals, and spare parts Ordering details Unit dimensions Characteristic curves Page 1 2 3, 4 5...7 8
Application
Filtration and dehumidification of the intake air of industrial systems. Avoidance of initial damage in pumps and bearings and system components.
2/10
Bosch Rexroth AG
Hydraulics
RE 51415/02.09
Design
Dismountable filter housing for ventilation with internal, exchangeable filter element. Filter elements H10XL up to a filtration rating of 10 m with glass fiber mat and P up to 25 m with paper mat. Materials as per spare parts list. Designs: TLF I: with internal screw-in thread, TLF II: with external screw-in thread, TLF III: with external screw-in thread and filling filter (screen basket 130 m). TLF I 7-125: TLF I 8-250: TLF III 7-125: with DIN flange, with DIN flange, with DIN flange and filling filter (screen basket 130 m).
Maintenance intervals
Fields of application of the filter General mechanical engineering Heavy industry Mobile hydraulics Environmental conditions average dust content 925 mg/m3 5080 mg/m3 Maintenance interval 4,000 h 3,000 h 3,000 h
30100 mg/m3
Part 1 2 3 4 5 6
Piece 1 1 1 1 1 1
Part 1 2 3 4 6 7 8
Piece 1 1 1 1 1 1 1
RE 51415/02.09
Hydraulics
Bosch Rexroth AG
3/10
00
0
Complementary details 0= without 0= Material Standard Seal Polyurethane adhesive NBR seal Connection Standard Clogging indicator without Bypass valve without
0= M= 00 = 0= = P 0=
= H10XL
Pressure differential Max. admissible pressure differential of the filter element Standard =S Element model Standard adhesive T = 80 C Standard material Solenoid without = 0 = 0 =0 Ordering example: TLF III 3 - 40 P10-S00-000-00M00
0
Seal Polyurethane adhesive NBR seal Bypass valve without Element model Standard adhesive T = 80 C Standard material
= P
Pressure differential Max. admissible pressure differential of the filter element Standard
=S
4/10
Bosch Rexroth AG
Hydraulics
RE 51415/02.09
00 M
0
Complementary details 0= without 0= Material Standard Seal NBR seal Connection Standard Clogging indicator without Bypass valve without
Pressure differential Max. admissible pressure differential of the filter element Standard =S Element model Standard adhesive T = 80 C Standard material Solenoid without = 0 = 0 =0
M
Seal NBR seal Bypass valve without Element model Standard adhesive T = 80 C Standard material
= P
Pressure differential Max. admissible pressure differential of the filter element Standard
=S
RE 51415/02.09
Hydraulics
Bosch Rexroth AG
5/10
TLF II
6/10
Bosch Rexroth AG
Hydraulics
RE 51415/02.09
G2 / G 21 2 G3 G1 G G / 11 4 / 11 2
80 78 43
6 7 8
46 55 60 75 90 105 46 55 60 75 90 105
G2 / G21 2 G3 G1 G G G / 11 4 / 11 2 / 21 2
80 78 43
9 6 7 8
G2 G3
80 78
RE 51415/02.09
Hydraulics
Bosch Rexroth AG
7/10
Flange
Flange
Hole pattern
Hole pattern
TLF I 8-250
Flange
Hole pattern
8/10
Bosch Rexroth AG
Hydraulics
RE 51415/02.09
10
10
5 3 2
H3 XL
5 3 2
H10 XL
H3 XL
G10
P10
1 20 30 5 10 20 Air flow
P10
30 [m3/h]
G10
60
H1 0X L
100
TLF5-65 20 20
TLF6-80
H3 XL
10
10
H1 0X L
P10
G10
1 10
20
200 300
1 10
20
G1 0
P1 0
H1 0X L
H3 XL
200 300
TLF7-125 20 20
TLF8-250
H3 XL
H10 XL
3 2
3 2
P10 G10
1 10
20 30 50
100
1 200 300
500
1000 [m3/h]
G1 0
2000 3000 5000 Air flow
Air flow
[m3/h]
P10
H1 0X L
H3 XL
10
10
RE 51415/02.09
Hydraulics
Bosch Rexroth AG
9/10
Notes
10/10
Bosch Rexroth AG
Hydraulics
RE 51415/02.09
Notes
Bosch Rexroth Filtration Systems GmbH Hardtwaldstrae 43, 68775 Ketsch, Germany POB 1120, 68768 Ketsch, Germany Phone +49 (0) 62 02 / 6 03-0 Fax +49 (0) 62 02 / 6 03-1 99 brfs-support@boschrexroth.de www.eppensteiner.de
This document, as well as the data, specifications and other information set forth in it, are the exclusive property of Bosch Rexroth AG. It may not be reproduced or given to third parties without its consent. The data specified above only serve to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that our products are subject to a natural process of wear and aging.