Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
R-1 with M 12x1 R-1 with Metri Pack 150 R-1 with cable
Economical price, high performance Production on highly flexible manufacturing lines provides a very attractive price to performance ratio for large production runs.
Page 1 of 4
R
20 bar
10 bar
100 bar
20 bar
1. All pressure ranges available starting from 30INHG Vacuum (-1 bar) {Compound ranges available upon request} Stainless steel
100 bar
32 bar
16 bar
25 bar
160 bar
50 bar
40 bar
250 bar
80 bar
60 bar
400 bar
100 bar
400 bar
Materials Case
Chemical resistant fiberglass- reinforced plastic (PBT GF 30) Signal output 4 ... 20 mA, 2-wire 0 ... 10 V, 3-wire 1 ... 5 V, 3-wire 5 500 0.5 ... 4.5 V, ratiometric Power supply 7 ... 30 VDC 14 ... 30 VDC 8 ... 30 VDC
Stainless steel
5 0.5 VDC
ms
VDC
% of span % of span
1.0 (B.F.S.L.) ( 2.0 per IEC 61298-2 *) 0.3 (at reference conditions) -40 ... +212 F
Permissible temperature of Ambient Rated temperature range rated temperature range Mean TC of zero CE-conformity Mean TC of range Pressure equip. directive EMC directive
-40 ... +100 C -25 ... +80 C -25 ... +80 C -25 ... +80 C
% of span
Wiring protection
Short-circuit protection
Page 2 of 4
Example
Electrical connection
Cable with free ends Wire gauge: 3 x 0.14 mm Cable diameter: 3.2 mm IP 69K Order code: FN
1.55" 40 mm)
Pressure connection
7/16-20 UNF-2A 90 Cone Order code: U5
7/16"-20UNF-2A
Electrical connections
Cable with free ends Wire gauge: 3 x 0.14 mm Cable diameter: 3.2 mm IP 69K Order code: FN Circular connector M 12x1 4 pin IP 67 Order code: M4 Connector Metri Pack Series 150 3 pin IP 67 Order code: R3
Pressure connections
1/8 NPT male Order Code: NH 0.95" (24 mm) 0.63" (16 mm)
1/4" NPT
Page 3 of 4
Pressure connections
7/16-20 UNF-2B Schrader internal thread with deflator pin Order code: U6
7/16"-20UNF-2A
7/16"-20UNF-2B
Electrical connections
Circular connector M 12x1 4 pin
For installation and safety instructions refer to the operating instructions for this product.
2-wire
3-wire
brown
Legend:
Page 4 of 4
Specifications and dimensions given in this data sheet represent the state of engineering at the time of printing. Modifications may take place and materials specified may be replaced by others without prior notice.
WIKA Instrument Corporation 1000 Wiegand Boulevard Lawrenceville, GA 30043 1-888-WIKA-USA /770-513-8200 (in GA) Fax 770-338-5118 info@wika.com www.wika.com