Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
TWo-WHEElEd T R a C T o R s
technologie
passion
GOLDONI S.p.A.
summary
page
TWO-WHEELED tRACtORS
4
TWIST 6 TWIST 9
page
6
TWIST 7S JOKER 8DS JOKER 10DS JOKER 12S
page
page
12
MY SPECIAL 14 MY SPECIAL 15
page
14 16
page JOKER 12S
TWIST
6 - 9
4
TWIST 6 Engine with 4,8 ch, gasoline TWIST 9 Engine with 7,1 ch, gasoline
KEy
the speeds are given in kph
Series TWIST
TWIST 6
Engine
Type Power rating N cylinders / nominal rate Swept volume Start Tank capacity
Kw/Ch cc. Lt.
8
TWIST 9
Honda GX240 Gasoline 5,3 (7,1) 1 to 3600 rpm/min 242 pull start 6 2 FWD + 2 REV dry cone clutch with manual MOWING control no operated with lever FWD: 1,52; 3,06 - REV: 1,67; 3,35 yes
0,9 1,4 3,5 5,2 7
forward speeds
Honda GX160 Gasoline 3,6 (4,8) 1 to 3600 rpm/min 163 pull start 3,6 2 FWD + 2 REV dry cone clutch with manual control no operated with lever FWD: 1,52; 3,06 - REV: 1,67; 3,35
1,4 2,8
Transmission
N speeds Main clutch Differential lock Wheels clutch release Speed
2,8 1,3 6
3,1
3,3
Kph
1,5
1,7
yes
PTO
I II I II III
Type
II
III
IV
II
III 1 speed independent from the tractors I ground II speed III with
5,0
IV
Driver's Area
1,3
Handlebars
3,3
3,6
4,0
assembled on elastic shock-absorbers, height adjustable in 9 positions. Single steering column in 5 positions adjustable and rotatable at 180 yes fast
2,0
1,7
1,8
MILLING
Tyres
Tyres available Hubs with adjustable cylindric wheel holder
8 mm8 mm
IV
The height of the handlebars can be set in as many as 9 positions.This means that the two-wheeled tractor can be used by all the family for any type of work. Moreover, since the handlebars can be regulated in 5 different positions at the sides, the operator is prevented from walking over the ground he has already worked. Turning the handlebars 180 is a simple process and enables the machine to be fitted with front-mounted implements, such as: lawn mower, cultivator, snow plough, scraper, etc GEARSTOP does not turn the engine off but it locks the transmission and the PTO, in case of release of the handlebar grip.
Device that prevents the reverse gear from being engaged when the PTO is used for cultivating work. The quick coupling allows the operator to quickly and easily change the implements.
The external width of the wheels and the track width are adjustable.The adjustments adapt the machine to specialized crops.
TWIST
7s
SLIDING TRACKWIDTH
KEy
the speeds are given in kph
Series TWIST
TWisT 7S
Engine
Type Power rating N cylinders / nominal rate Swept volume Start Tank capacity
Kw/Ch cc. Lt.
forward speeds
Honda GX200 Gasoline 4,1 (5,5) 1 to 3600 rpm/min 196 pull start MOWING 3,6 3 AV + 3 RM with reverse shuttle dry cone clutch with manual control operated with lever no FWD: 1,4; 2,8; 5,0 - REV: 2,0; 4,0; 7,2 yes with 1 speed independent from the tractors ground speed
0,94 1,44 3,56 5,18
Transmission
MOWING N speeds Main clutch Differential lock Wheels clutch release Speed with wheels 5.00x10 3rd speed block when REV gear is engaged
5,0
2,8
3,5
5,2
1,4
PTO
Type
I II III
I Driver's Area
0,9
II
1,4
Kph
III
IV
II
III
IV
Handlebars
2,0
assembled on elastic shock-absorbers, height adjustable in 9 positions. Single steering column in 5 positions adjustable and rotatable at 180 yes fast
1,33 2,05
Tyres
8 mm8 mm
1,3
I 0,9
II
III
IV
I 0,94
1,33
II
2,05
III
5,05
mm mm Kg
520-786 MILLING
7,2
IV
1,4
1,44
3,56
The height of the handlebars can be set in as many as 9 positions.This means that the two-wheeled tractor can be used by all the family for any type of work. Moreover, since the handlebars can be regulated in 5 different positions at the sides, the operator is prevented from walking over the ground he has already worked. Turning the handlebars 180 is a simple process and enables the machine to be fitted with front-mounted implements, such as: lawn mower, cultivator, snow plough, scraper, etc
Device that prevents the reverse gear from being engaged when the PTO is used for cultivating work.
GEARSTOP does not turn the engine off but it locks the transmission and the PTO, in case of release of the handlebar grip.
The quick coupling allows the operator to quickly and easily change the implements.
The external width of the wheels and the track width are adjustable.The adjustments adapt the machine to specialized crops.
TWIST
11S - 12s
8
TWIST 11S Engine with 8,2 hp, gasoline TWIST 12S Engine with 9,5 hp, gasoline
KEy
the speeds are given in kph
Series TWIST
TWIST 11S
Engine
Type Power rating N cylinders / nominal rate Swept volume Start Tank capacity
Kw/Ch cc. Lt.
TWIST 12S
Honda GX340 Gasoline 7,1 (9,5) 1 to 3600 rpm/min 337 pull start; electric starting optional 6,5 3 FWD + 3 REV with reverse shuttle dry-disk clutch with manual control operated with lever no MOWING FWD: 1,7; 3,3; 5,9 - REV: 1,8; 3,6; 6,5 yes with 1 speed independent from the tractors ground speed assembled on elastic shock-absorbers, height I II 9 positions. III Single IV steering column adjustable in in 5 positions adjustable and rotatable at 180
1,3 0,9 1,4 3,5 5,2 7
forward speeds
Honda GX270 Gasoline 6 (8,2) 1 to 3600 rpm/min 270 pull start 6 3 FWD + 3 REV with reverse shuttle dry cone clutch with manual control operated with lever no FWD: 1,7; 3,3; 5,9 - REV: 1,8; 3,6; 6,5 yes
2,8
Transmission
N speeds Main clutch Differential lock Wheels clutch release Speed with wheels 5.00x10 3rd speed block when REV gear is engaged
6 8
5,9
Kph
3,1
3,3
PTO
1,3
2,8
Type
with 1 speed independent from the tractors ground speed assembled on elastic shock-absorbers, height III adjustable in 9 positions. Single steering column in 5 positions adjustable and rotatable at 180 yes fast
1,7
Driver's Area
I II III I II III Handlebars IV I II
1,4
5,0
yes fast 1797 460-642 (wheels 4.0x10") 116 5.0x10" 4.00x8" garden
8 mm8 mm
6,5
Tyres
Tyres available
7,2
Max length Min and max width Wheight with std wheels and cultivator included
2,0
mm mm Kg
3,3
3,6
4,0
MILLING
The height of the handlebars can be set in as many as 9 positions.This means that the two-wheeled tractor can be used by all the family for any type of work. Moreover, since the handlebars can be regulated in 3 different positions at the sides, the operator is prevented from walking over the ground he has already worked. Turning the handlebars 180 is a simple process and enables the machine to be fitted with front-mounted implements, such as: lawn mower, cultivator, snow plough, scraper, etc
GEARSTOP does not turn the engine off but it locks the transmission and the PTO, in case of release of the handlebar grip.
Device that prevents the reverse gear from being engaged when the PTO is used for cultivating work.
The quick coupling allows the operator to quickly and easily change the implements.
The external width of the wheels and the track width are adjustable.The adjustments adapt the machine to specialized crops.
assured by experience
G E n E R al CaTalogUE
TWo-WHEElEd T R a C T o R s
JOKER
8ds - 10ds 12s
12
JOKER 8DS engine with 6,8 hp, diesel JOKER 10DS engine with 10 hp, diesel JOKER 12S engine with 9,5 hp, gasoline
JOKER 8DS
JOKER 10DS
Diesel Lombardini 15LD400 7,3/10 1 / 3600 rpm 401 pull start; electrical starting optional 5 without clutch housing spacer 4 FWD + 3 REV each way dry-disk clutch with manual control operated with lever yes Tilling FWD direction: 1,12; 1,72; 4,24; 6,18 Tilling REV direction: 0,79; 1,21; 2,99 Grass-cutting FWD: 0,79; 1,21; 2,99; 4,35 Grass-cutting REV: 1,12; 1,72 yes with 1 speed independent from the tractors ground speed yes assembled on elastic shockabsorbers, height adjustable in 9 positions. Single steering column in 5 positions adjustable and rotatable at 180 yes yes fixed 555-668 1768 153 5.00x10 yes
JOKER 12S
Gasoline Honda GX340 7,1 (9,5) 1 / 3600 rpm 337 pull start 6,5 without clutch housing spacer 4 FWD + 3 REV each way dry-disk clutch with manual control operated with lever yes Tilling FWD direction: 1,12; 1,72; 4,24; 6,18 Tilling REV direction: 0,79; 1,21; 2,99 Grass-cutting FWD: 0,79; 1,21; 2,99; 4,35 Grass-cutting REV: 1,12; 1,72 yes with 1 speed independent from the tractors ground speed yes assembled on elastic shockabsorbers, height adjustable in 9 positions. Single steering column in 5 positions adjustable and rotatable at 180 yes yes fixed 555-668 1822 116 5.00x10 yes
KEy
the speeds are given in kph
Engine
Type Power rating N cylinders / nominal rate Swept volume Start Tank capacity Notes
Lt. Kw/Hp cc.
forward speeds
Diesel Lombardini 15LD315 5,6/6,8 1 / 3600 rpm 315 pull start; electrical starting optional 4,3 without clutch housing spacer 4 FWD + 3 REV each way dry-disk clutch with manual control operated with lever yes
Transmission
N speeds Main clutch Reverser Differential lock Speed with wheels 5.00x10 Reverse gear block (safety device)
Kph
MOWING
Tilling FWD direction: 1,12; 1,72; 4,24; 6,18 Tilling REV direction: 0,79; 1,21; 2,99 Grass-cutting FWD: 0,79; 1,21; 2,99; 4,35 Grass-cutting REV: 1,12; 1,72 yes with 1 speed independent from the tractors ground speed yes assembled on elastic shockabsorbers, height adjustable in 9 positions. Single steering column in 5 positions adjustable and rotatable at 180 yes yes fixed
0,94
1,44
3,56
5,18
PTO
II III IV
1,33
2,05
Driver's Area
7,37
MILLING
5,05
Handlebars Tow hook GEAR STOP safety device Coupling system for attachments
1,33
2,05
I 0,94
II
III
IV
1,44
3,56
Tyres
Available tyres Adjustable hubs and rims with star flange
GEARSTOP does not turn the engine off but it locks the transmission and the PTO, in case of release of the handlebar grip.
The lever that locks and releases the handlebars so they can be turned, is controlled from the operators position and is easy to use. The handlebars can be adjusted at 9 height positions and intervals of 18, all conveniently selected from the operators position.
The handlebar column is connected to the casing with silent-blocks. By absorbing the vibrations, this device allows you to use the twowheeled tractor for long periods of time without tiring.
A full bonnet covers the engine to protect the mechanical parts and to safeguard the operator from accidents.
JOKER
12s
Sliding track-width
14
Series JOKER
JOKER 12S
Engine
Type Power rating N cylinders / nominal rate Swept volume Start Tank capacity Notes
Kw/Hp cc. Lt.
forward speeds
Gasoline Honda GX340 7,1 (9,5) 1 / 3600 rpm 337 pull start 6,5 with clutch housing spacer 4 FWD + 2 REV each way dry-disk clutch with manual control operated with lever yes
Transmission
MOWING
5,18
N speeds Main clutch Reverser Differential lock Speed with wheels 5.00x10 Reverse gear block (safety device)
Kph
3,56
Tilling FWD direction: 1,33; 2,05; 5,05; 7,37 - Tilling REV direction: 0,94; 1,44; 3,56 Grass-cutting FWD: 0,94; 1,44; 3,56; 5,18 - Grass-cutting REV: 1,33; 2,05 yes with 1 speed independent from the tractor's ground speed yes assembled on elastic shock-absorbers, height adjustable in 9 positions. Single steering column in 5 positions adjustable and rotatable at 180 yes yes fixed
1,44
PTO
III IV
0,94
II
1,33
2,05
Driver's Area
7,37
Handlebars Tow hook GEAR STOP safety device Coupling system for attachments
MILLING
5,05
1,33
2,05
I 0,94
II
Min and max width Max length Wheight with std wheels and cultivator included
mm mm Kg
Tyres
3,56
1,44
GEARSTOP does not turn the engine off but it locks the transmission and the PTO, in case of release of the handlebar grip.
The lever that locks and releases the handlebars so they can be turned, is controlled from the operators position and is easy to use. The handlebars can be adjusted at 9 height positions and intervals of 18, all conveniently selected from the operators position.
The handlebar column is connected to the casing xith silent-blocks. By absorbing the vibrations, this device allows you to use two wheeled tractor for long periods of time without tiring.
A full bonnet covers the engine to protect the mechanical parts and to safeguard the operator from accidents.
MY SPECIAL
14 - 15
16
MY SPECIAL 14 engine with 12,2 hp, diesel MY SPECIAL 15 engine with 13,6 hp, diesel
KEy
the speeds are given in kph
Series MY SPECIAL
MY SPECIAL 14
Engine
Type Power rating N cylinders / nominal rate Swept volume Start Tank capacity
Kw/Ch cc. Lt.
MY SPECIAL 15
Diesel Lombardini 25LD330/2 B1 10 (13,6) 2 / 3000 rpm 654 pull start; electrical starting optional 4 4 FWD + 1 REV dry-disk MOWING yes FWD: 1,37 / 2,77 / 6,0 / 8,0 REV: 2,81 yes
0,94
forward speeds
Diesel Lombardini 3LD510 9 (12,2) 1 / 3000 rpm 510 pull start; electrical starting optional 5,2 4 FWD + 1 REV dry-disk yes MOWING FWD: 1,37 / 2,77 / 6,0 / 8,0 REV: 2,81 yes
5,2
Transmission
N speeds Main clutch Differential lock Wheels clutch release Speed
Kph
5,0 2,8 3,5 8
5,9
PTO
I II III IV
I II III I II III Type Reverse gear block when PTO is engaged (safety device) 1,3
0,9
Type of brakes
band type
IV 2 speeds independent from the tractors I II III IV rpm - 900 rpm) with ground speed (540 yes 1,33
2,8
Capot Tow hook GEAR STOP safety device Coupling system for attachments
4,0 7,2
2,0
Handlebars
6,5
MILLING
fixed, sheet made, height adjustable in 9 positions. sheet yes yes fixed
7
fixed, sheet made, height adjustable in 9 positions. sheet yes MILLING yes fixed
2,05
Driver's Area
1,44
1,3
Brakes
1,4
1,4
3,56
2,8
Min and max width Max length Wheight with std wheels and cultivator included
1,3
mm mm Kg
III IV
Tyres
Available tyres Adjustable rims for track regulation Wheel axle with track width adjuster
8 mm8 mm
1,33
I 0,9
II
II 0,94
3,56
2,05
1,4
1,44
5,05
7,37
5,18
GEARSTOP does not turn the engine off but it locks the transmission and the PTO, in case of release of the handlebar grip.
A full bonnet covers the engine to protect the mechanical parts and to safeguard the operator from accidents.
The external width of the wheels and the track width are adjustable, enabling the My Special to be adapted for work on specialized crops.
18
LinkAgE 85
OnE-SpEED bALLASt
TWIST 6
TWIST 9
TWIST 7S
TWIST 11S
TWIST 12S
JOKER 8 DS
JOKER 10 DS
JOKER 12S
JOKER 12S
MY SPECIAL 14
MY SPECIAL 15
LinkAgE 70
G E n E R al CaTalogUE
TWo-WHEElEd T R a C T o R s
tRAnSFER WHEEL
impLEmEnt CARRiER
COULtER
tURn-WRESt plough 90
tURn-WRESt plough180
LAWn mOWER TP 60
SingLE-SHARE pLOUgH
FROnt bALLASt
Goldoni S.p.A. Via Canale, 3 41012 Migliarina di Carpi Modena, Italy tel. +39 0522 640 111 fax +39 0522 699 002 www.goldoni.com
Goldoni France Route de Bourg-Saint-Andol 26700 Pierrelatte, France tl. +33 04 75 54 77 00 fax +33 04 75 54 81 40 goldonifrance@wanadoo.fr www.goldoni.com
Authorized dealer
Goldoni suggests original lubricants