Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Customization Group: CUSTOM Customization file loaded successfully. Customization Group: ACCOV Customization file loaded successfully. Customization Group: EXPRESS Regenerating model.
AutoCAD Express Tools Copyright 2002-2004 Autodesk, Inc. ; error: bad argument type: lentityp nil
AutoCAD menu utilities loaded.; error: bad argument type: stringp nil
Command: COMMANDLINE
Command: Command: Command: Command: Command: Specify opposite corner: Command: Command: Command: line Specify first point: Specify next point or [Undo]: 1
Command:
Command:
Command: line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: Specify next point or [Close/Undo]:
Specify base point or [Displacement/mOde] <Displacement>: Specify second point or <use first point as displacement>: Specify second point or [Exit/Undo] <Exit>: Specify second point or [Exit/Undo] <Exit>: Specify second point or [Exit/Undo] <Exit>: Specify second point or [Exit/Undo] <Exit>: Specify second point or [Exit/Undo] <Exit>: Specify second point or [Exit/Undo] <Exit>: Specify second point or [Exit/Undo] <Exit>: Specify second point or [Exit/Undo] <Exit>: Specify second point or [Exit/Undo] <Exit>: Specify second point or [Exit/Undo] <Exit>: Specify second point or [Exit/Undo] <Exit>: Specify second point or [Exit/Undo] <Exit>: Specify second point or [Exit/Undo] <Exit>:
Current settings: Copy mode = Multiple Specify base point or [Displacement/mOde] <Displacement>: *Cancel*
Command: region
Select objects:
14 loops extracted.
14 Regions created.
Command: union
Select objects:
Command: Command: Command: Command: _rotate Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0 1 found
Command: Specify opposite corner: Command: Command: Command: Command: _rotate Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0 1 found
Command: *Cancel*
Select objects:
0 loops extracted.
0 Regions created.
Command: revolve
Current wire frame density: ISOLINES=4 Select objects to revolve: Specify opposite corner: 1 found
Specify axis start point or define axis by [Object/X/Y/Z] <Object>: Specify axis endpoint: Specify angle of revolution or [STart angle] <360>: 71
Command: _u REVOLVE Command: _u REGION Command: Specify opposite corner: Command: Command: _.erase 1 found
Command: region
Select objects:
0 loops extracted.
0 Regions created.
Command: revolve
Current wire frame density: ISOLINES=4 Select objects to revolve: Specify opposite corner: 1 found
Specify axis start point or define axis by [Object/X/Y/Z] <Object>: Specify axis endpoint: Specify angle of revolution or [STart angle] <360>:
Current wire frame density: ISOLINES=4 Select objects to revolve: Specify opposite corner: 0 found Select objects to revolve: 1 found
Specify axis start point or define axis by [Object/X/Y/Z] <Object>: Specify axis endpoint: Specify angle of revolution or [STart angle] <360>:
Specify axis start point or define axis by [Object/X/Y/Z] <Object>: Specify axis endpoint: Specify angle of revolution or [STart angle] <360>:
Command: _u REVOLVE Command: line Specify first point: Specify next point or [Undo]: 4
Command: revolve
Specify axis start point or define axis by [Object/X/Y/Z] <Object>: Specify axis endpoint: Specify angle of revolution or [STart angle] <360>: 71
Specify base point or [Displacement] <Displacement>: Specify second point or <use first point as displacement>: Command: '_.zoom _e Command: rotate
Select objects:
Command: move
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or <use first point as displacement>:
Specify base point or [Displacement] <Displacement>: Specify second point or <use first point as displacement>: Command: box
Specify first corner or [Center]: Specify other corner or [Cube/Length]: Specify height or [2Point] <-2.0000>: 1.4
Command:
Command: line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]:
Command: Command: _u LINE Command: line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: Specify next point or [Close/Undo]: Specify next point or [Close/Undo]: Specify next point or [Close/Undo]:
Command: region
Select objects:
1 loop extracted.
1 Region created.
Command: extrude
Command: Command: Command: Command: Command: Command: Command: Automatic save to C:\Users\user\AppData\Local\Temp\Drawing1_1_33_0041.sv$ ...
Command: Command: Command: Command: _rotate Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0 2 found
Specify base point or [Displacement] <Displacement>: Specify second point or <use first point as displacement>: Command: Command: Command: Command: Command: _rotate Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0 2 found
Command: Command: Command: _-view Enter an option [?/Delete/Orthographic/Restore/Save/sEttings/Window]: _top Regenerating model.
Command: Command: Command: Command: Command: _rotate Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0 2 found
Command: Specify opposite corner: Command: Command: Command: Command: _move 2 found
Specify base point or [Displacement] <Displacement>: Specify second point or <use first point as displacement>: Command:
Command: Command: Command: Command: _rotate Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0 2 found
Current settings: Mode = TRIM, Radius = 0.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius:
Current settings: Mode = TRIM, Radius = 0.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius:
Specify base point or [Displacement] <Displacement>: Specify second point or <use first point as displacement>: Command: fillet
Current settings: Mode = TRIM, Radius = 0.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius:
Current settings: Mode = TRIM, Radius = 0.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius:
Command: fillet
Current settings: Mode = TRIM, Radius = 6.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <6.0000>: 6
Command: fillet
Current settings: Mode = TRIM, Radius = 0.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius: 4
Command: *Cancel*
Command: fillet
Current settings: Mode = TRIM, Radius = 0.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
No fillet to be computed.
Command: FILLET Current settings: Mode = TRIM, Radius = 0.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: p Select 2D polyline: Object selected is not a 2D polyline Select 2D polyline: Object selected is not a 2D polyline Select 2D polyline: Select 2D polyline: Object selected is not a 2D polyline Select 2D polyline: Object selected is not a 2D polyline Select 2D polyline: *Cancel*
Command: FILLET Current settings: Mode = TRIM, Radius = 0.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius: r
Command: FILLET Current settings: Mode = TRIM, Radius = 5.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <5.0000>:
Command: *Cancel*
Command: *Cancel*
Command: _.undo Current settings: Auto = On, Control = All, Combine = Yes, Layer = Yes Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back] <1>: 1 INTELLIZOOM Command: Command: Command: _bedit
Command: _u Block Editor Command: _u GROUP Command: _u FILLET Command: _u FILLET Command: _u FILLET Command: fillet
Current settings: Mode = TRIM, Radius = 0.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius: 3
Command: FILLET
Current settings: Mode = TRIM, Radius = 0.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius: 3
Command: FILLET
Current settings: Mode = TRIM, Radius = 0.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius: 3
Command: *Cancel*
Command: FILLET Current settings: Mode = TRIM, Radius = 0.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius:
Command: Command: FILLET Current settings: Mode = TRIM, Radius = 3.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <3.0000>:
Command: FILLET
Current settings: Mode = TRIM, Radius = 3.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <3.0000>:
Command: *Cancel*
Command: _.undo Current settings: Auto = On, Control = All, Combine = Yes, Layer = Yes Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back] <1>: 1 FILLET Command: _u FILLET Command: fillet
Current settings: Mode = TRIM, Radius = 3.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <3.0000>:
Current settings: Mode = TRIM, Radius = 3.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <3.0000>:
Command: FILLET
Current settings: Mode = TRIM, Radius = 3.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <3.0000>:
No fillet to be computed.
Command: _u FILLET Command: _u FILLET Command: _u INTELLIZOOM INTELLIZOOM Command: _u FILLET Command: Command: Command: _qsave Command: Command:
Command: _saveas
Command: FILLET
Current settings: Mode = TRIM, Radius = 0.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius: 6
Select an edge or [Chain/Radius]: Select an edge or [Chain/Radius]: Edge has already been picked.
Current settings: Mode = TRIM, Radius = 0.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius:
Command: FILLET
Current settings: Mode = TRIM, Radius = 6.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <6.0000>: 6
Select an edge or [Chain/Radius]: Select an edge or [Chain/Radius]: Select an edge or [Chain/Radius]: Select an edge or [Chain/Radius]:
Command: fillet
Current settings: Mode = TRIM, Radius = 6.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: *Cancel*
Current settings: Mode = TRIM, Radius = 6.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <6.0000>: 6
Command: FILLET
Current settings: Mode = TRIM, Radius = 6.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <6.0000>: 6
Command: cylinder
Command: CYLINDER
Specify center point of base or [3P/2P/Ttr/Elliptical]: Specify base radius or [Diameter] <3.0000>: 1
Command:
Command: CYLINDER
Specify center point of base or [3P/2P/Ttr/Elliptical]: Specify base radius or [Diameter] <1.0000>: d
Command: _u INTELLIZOOM Command: _u CYLINDER Command: _u ERASE Command: _u INTELLIZOOM Command: _u CYLINDER Command: _u CYLINDER Command: _u INTELLIZOOM INTELLIPAN INTELLIZOOM Command: _u FILLET Command: _u FILLET Command: _u INTELLIZOOM INTELLIZOOM INTELLIZOOM INTELLIZOOM Command: _u FILLET Command: _u INTELLIZOOM Command: _u FILLET Command: _u INTELLIZOOM INTELLIZOOM INTELLIZOOM Command: _u FILLET
Specify center point of base or [3P/2P/Ttr/Elliptical]: Specify base radius or [Diameter] <0.5000>: 1
Command: union
Select objects:
Command: _u INTELLIZOOM INTELLIPAN INTELLIZOOM INTELLIPAN INTELLIZOOM INTELLIPAN INTELLIZOOM INTELLIZOOM Command: _u _CVPORT Command: _u _CVPORT Command: _u INTELLIZOOM Command: _u UNION
Command: *Cancel*
Command: fillet
Current settings: Mode = TRIM, Radius = 0.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius:
Command: FILLET
Current settings: Mode = TRIM, Radius = 1.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <1.0000>: 1
Command: FILLET
Current settings: Mode = TRIM, Radius = 1.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <1.0000>: 1
Command: FILLET
Current settings: Mode = TRIM, Radius = 1.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <1.0000>: 1
Command: FILLET Current settings: Mode = TRIM, Radius = 1.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <1.0000>:
Command: FILLET Current settings: Mode = TRIM, Radius = 1.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <1.0000>:
Command: cylinder
Specify center point of base or [3P/2P/Ttr/Elliptical]: Specify base radius or [Diameter] <1.0000>: 0.5
Current settings: Copy mode = Multiple Specify base point or [Displacement/mOde] <Displacement>: Specify second point or <use first point as displacement>: Specify second point or [Exit/Undo] <Exit>:
Select objects: Select solids and regions to subtract .. Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or <use first point as displacement>: *Cancel*
Command: move
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or <use first point as displacement>: Command: Command: copy 1 found
Current settings: Copy mode = Multiple Specify base point or [Displacement/mOde] <Displacement>: Specify second point or <use first point as displacement>: *Cancel*
Command: copy
Select objects:
Current settings: Copy mode = Multiple Specify base point or [Displacement/mOde] <Displacement>: Specify second point or <use first point as displacement>: Specify second point or [Exit/Undo] <Exit>:
Command:
Command: Command: Command: _qsave Command: Command: Command: _qsave Command: Command: Command: _qsave Command: *Cancel*
Command: *Cancel*
Command: QSAVE Command: QSAVE Command: QSAVE Command: Command: Command: _qsave
Command: Command: Command: _saveas Command: Command: Command: _vscurrent Enter an option [2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other] <2dwireframe>: _R Command: Command: _u INTELLIPAN INTELLIZOOM INTELLIZOOM INTELLIZOOM Command: _u VSCURRENT GROUP Regenerating model.
Command: fillet
Current settings: Mode = TRIM, Radius = 1.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <1.0000>: 1
No fillet to be computed.
Command: FILLET
Current settings: Mode = TRIM, Radius = 1.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <1.0000>: 1
Command: *Cancel*
Command: _.undo Current settings: Auto = On, Control = All, Combine = Yes, Layer = Yes Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back] <1>: 1 INTELLIZOOM INTELLIZOOM INTELLIZOOM Command: *Cancel*
Command: *Cancel*
Command: _.undo Current settings: Auto = On, Control = All, Combine = Yes, Layer = Yes Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back] <1>: 1 Everything has been undone
Command: *Cancel*
Command: *Cancel*
Select objects:
Command: fillet
Current settings: Mode = TRIM, Radius = 1.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <1.0000>: *Cancel*
No fillet to be computed.
Command: FILLET
Current settings: Mode = TRIM, Radius = 1.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <1.0000>:
Command: FILLET
Current settings: Mode = TRIM, Radius = 1.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <1.0000>: 1
Command: union
Select objects:
Command: FILLET
Current settings: Mode = TRIM, Radius = 1.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <1.0000>: 4
Command: FILLET Current settings: Mode = TRIM, Radius = 4.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <4.0000>:
Command: FILLET Current settings: Mode = TRIM, Radius = 4.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <4.0000>:
Command: Command: Command: _-view Enter an option [?/Delete/Orthographic/Restore/Save/sEttings/Window]: _seiso Regenerating model.
Command: FILLET
Current settings: Mode = TRIM, Radius = 4.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter fillet radius <4.0000>:
Command: cylinder
Specify center point of base or [3P/2P/Ttr/Elliptical]: Specify base radius or [Diameter]: 0.5
Command: '_.zoom _e Command: Specify opposite corner: Command: Command: Command: Command: _properties Command: *Cancel*
Command: *Cancel*
Command: Specify opposite corner: Command: Command: Command: Command: _move 1 found
Specify base point or [Displacement] <Displacement>: Specify second point or <use first point as displacement>: Command: Command: Command: Command: _rotate Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0 1 found
Specify base point or [Displacement] <Displacement>: Specify second point or <use first point as displacement>: Command: subtract Select solids and regions to subtract from ..
Select objects: Select solids and regions to subtract .. Select objects: 1 found
Select objects:
Command: Command: Command: _dimlinear Specify first extension line origin or <select object>: *Cancel*
Command: ucs
<World>: *Cancel*
Command: Command: Command: _dimlinear Specify first extension line origin or <select object>: Specify second extension line origin: Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Dimension text = 34.3 Command: Command: *Cancel*
Command: Command: Command: _dimlinear Specify first extension line origin or <select object>: Specify second extension line origin: Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Dimension text = 3 Command: Command: Command: _dimlinear Specify first extension line origin or <select object>: Specify second extension line origin: Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Dimension text = 8 Command: _u INTELLIZOOM INTELLIZOOM Command: Command: Specify opposite corner: Command: *Cancel*
Specify first extension line origin or <select object>: Specify second extension line origin: Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Dimension text = 8 Command: Command: Command: _dimlinear Specify first extension line origin or <select object>: Specify second extension line origin: Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: *Cancel*
Command: Command: Command: _dimradius Select arc or circle: Dimension text = 1 Specify dimension line location or [Mtext/Text/Angle]: Command: Command: Command: _dimdiameter Select arc or circle: Object selected is not a circle or arc.
Specify dimension line location or [Mtext/Text/Angle]: Command: Command: Command: _dimradius Select arc or circle: Dimension text = 1 Specify dimension line location or [Mtext/Text/Angle]: Command: Command: Command: _dimlinear Specify first extension line origin or <select object>: Specify second extension line origin: Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: *Cancel*
Command: Command: Command: _dimlinear Specify first extension line origin or <select object>: Specify second extension line origin: Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: *Cancel*
Command: Command: Command: _dimlinear Specify first extension line origin or <select object>:
Specify second extension line origin: Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: *Cancel*
Command: Command: Command: _dimlinear Specify first extension line origin or <select object>: Specify second extension line origin: Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: *Cancel*
Command: Command: _dimlinear Specify first extension line origin or <select object>: Specify second extension line origin: Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Dimension text = 1.28 Command: Command: _dimlinear Specify first extension line origin or <select object>: Specify second extension line origin: Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Dimension text = 1.4 Command:
Command: _dimradius Select arc or circle: Object selected is not a circle or arc.
Select arc or circle: Dimension text = 0.5 Specify dimension line location or [Mtext/Text/Angle]: Automatic save to C:\Users\user\AppData\Local\Temp\gamtek bengi_1_33_0041.sv$ ...
Command: Command: Command: _dimradius Select arc or circle: Dimension text = 29.95 Specify dimension line location or [Mtext/Text/Angle]: Command: Command: Command: _dimradius
Select arc or circle: Dimension text = 31.95 Specify dimension line location or [Mtext/Text/Angle]: Command: Command: Command: _dimdiameter Select arc or circle: Dimension text = 8 Specify dimension line location or [Mtext/Text/Angle]: Command: Command: Command: _dimarc Select arc or polyline arc segment: Specify arc length dimension location, or [Mtext/Text/Angle/Partial]: *Cancel*
Command: Command: Command: _dimangular Select arc, circle, line, or <specify vertex>: Specify dimension arc line location or [Mtext/Text/Angle/Quadrant]: *Cancel*
Command: '_.zoom _e Command: '_dimstyle Dimension disassociated. Command: '_dimstyle Command: _qsave