Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
MODEL: WC-CFC-AL & WC-CFS-AL PRODUCT No.: WC-30218 & WC-30118 The WELLCARE APV (Aluminum Plunger Valve) Float Collar run in a casing assembly, usually several joins above the Float Shoe. It serves as an extra back pressure from blow while running the assembly and after the cementing job. Internal latch and valve are readily drillable. Its capability of back-pressure is over 10,000 PSI. Features/Benefits: Very fast PDC drillable half of the time in compare to conventional poppet positive valve avail in the market Excellent leak resistive cause of metal to metal seal Magnificent in flow rate as very special focused of this model Distinguished performance in accordance to API RP 10F for pressure and temperature cycle Distinct wear resistance and any other effects during cementing circulation as plunger/ball is made up of special bronze alloy Could be used in the role of NRV purpose as per requirements
Specification Guide:
Wt lbs/ft 6.59.45 9.312.95 9.513.5 11.521.0 14.023.0 23.038.0 20.039.0 24.044.0 32.353.5
L80 Burst (psi) 17047 17892 9203 10055 8992 9446 9645 9030 8758 Collapse (psi) 18471 19238 10368 11581 9962 10834 11148 10035 9514 Burst (psi) 23439 24601 12654 13826 12364 12989 13262 12416 12043
P110 Collapse (psi) 25397 26453 13276 15603 12698 13940 14483 12802 12060 Burst (psi) 11720 12300 6327 6913 6182 6494 6631 6208 6021
K55 Collapse (psi) 12699 13226 7340 7962 7184 7519 7664 7213 7012
NOTE: Float Equiments could be furnished with various grades of material with end connections standard or premium thread as per the customer's demand or requirement.
NOTE: Float Equiments could be furnished with various grades of material with end connections standard or premium thread as per the customer's demand or requirement.
Specification Guide: Normal Wt.Range CasingSize (Lbs/Ft) (In.) 41/2 5 51/2 7 75/8 85/8 95/8 103/4 113/4 133/8 16 185/8 20 9.513.5 11.521.0 14.023.0 23.038.0 20.039.0 24.044.0 32.353.5 32.755.5 38.065.0 48.072.0 65.0109.0 87.5117.5 94.0133.0
OD (In.) 5.000 5.563 6.050 7.656 8.500 9.625 10.625 11.750 12.750 14.375 17.000 20.000 21.000
ID(In.)
4.281 4.689 5.2 6.526 7.219 8.267 9.171 10.3 11.25 12.86 15.5 18.00 19.37
9203 10055 8992 9446 9645 9030 8758 7898 7529 6723 5647 6384 4952
10368 11581 9962 10834 11148 10035 9514 7863 7156 5608 3580 4958 2712
12654 13826 12364 12989 13262 12416 12043 10860 10353 9244 7765 8778 6810
13276 15603 12698 13940 14483 12802 12060 9708 8701 6497 4185 5571 2946
CIRCULATING DIFFERENTIAL FILL-UP COLLAR MODEL: WC-CDFC, PRODUCT No.: WC-30203 CIRCULATING DIFFERENTIAL FILL-UP SHOE MODEL: WC-CDFS, PRODUCT No.: WC-30103 DIFFERENTIAL FILL-UP DOWN JET SWIRL SHOE MODEL- WC-DFDS, PRODUCT No.- WC-30303 Differential Fill-up Float Equipment allows 90 per cent casing fill-up during run-in, reducing surge pressures caused by the piston effect of running casing in restricted IDs. Use of Differential Collar with Shoe provides additional buoyancy by allowing only 81 per cent casing fill-up further enhancing draw works efficiency. Circulation can be established at any time while running in. Dropping a ball converts the Differential Valve to a regular Back-Pressure Valve. When Collar and Shoe are run together, dropping one ball converts both units. CEMENT FLOAT COLLAR WITH ANTI-ROTATIONAL PLUG MODEL- WC-CFC-AR, PRODUCT No.- WC-30204 Cement/Poppet type float equipment offers dependable performance for all classes of oil and gas wells. The valves prevent cement back-flow and provide casing buoyancy during run in Float Collar is Non-Rotational type pressure and Cementing Plug activated. Plugs feature the latch-down type anti-rotational feature which is compatible with the Float Collar and eliminates rotation during drilling. Float Equipment is manufactured to match customer casing specification. All Poppet type Cement Float Collars are PDC drillable. DUPLEX CEMENT FLOAT SHOE MODEL- WC-DCFS, PRODUCT No.- WC-30105 DUPLEX CEMENT FLOAT COLLAR MODEL- WC-DCFC, PRODUCT No.- WC-30205 Duplex Shoes and Collars sizes 7 5/8 to 30 are furnished with heavy duty duplex connection. These heavy duty connections have 4 O.D. left hand threads and 3 I.D. seal bores, and are capable of carrying 100,000 lbs. with a minimum safety factor 2. Special accessory products are available for use with this large Duplex Equipment. The Tubing Seal Nipple has field proven Chevron Seals for positive sealing of the nipple in the seal bore. It features an expandable left hand latch mechanism, allow the nipple to be stabbed into the duplex connection, and when up-strain is applied the latch is expanded to provide full engagement in duplex assembly. The nipple is released by rotating to the right unscrewing the latch mechanism of the duplex connection. Left hand square thread subs with 4 O.D. left hand threads are also available for use with Large Duplex Equipment
WCCDFS
WCDFDS
WCCDFC
WCCFCAR
WCDCFC
WCDCFS
StabinFloatCollar
Use:
The WELLCARE Stab In Float Equipments are used for cementing large diameter casings lowered on drill pipe. The string presents special cementing consideration due to high displacement volume of large diameter casing. Problem with high displacement are overcome by using Stab in Cementing Equipment to allow cementing through drill pipe.
Features: which minimizes displacement volume behind cement and there by reduces contamination and save time.
Small diameter inner string off drill pipe is used to displace cement
StabinSealSub
cement top with displacement fluid in drill pipe and Poppet valve in
Stab in Shoe. Advantages: Improve displacement accuracy cement mixing and pumping continues until cement returns reach surface. Get better cement quality the reduced cement/mud interface area and high velocity of flow in the Drill Pipe minimize cement contamination while the short pumping time eliminates the need for cement retarders. Reduce cement volume conventional displacement requires calculation of excess cement factor, whereas with stab-in methods excess cement need be no greater than the volume of the drill pipe. No large plugs are needed. Reduce net rig time circulating, pumping, and drill-out times are minimized. Protect casing cementing pressures are confined to the drill pipe as in a squeeze job.
StabInFloatShoe
AUTO FILL CEMENT FLOAT SHOE MODEL- WC-CFS-A, PRODUCT No.- WC-30107 The Auto Fill Cement Float Shoe permits the casing to fill automatically while being run into the hole. The valve is in the open position while running in allowing maximum filling of the casing as it is lowered into the well bore. This is especially effective on liner jobs and sensitive whole conditions. The circulation may be established at any time during or after casing is run. The flapper type back pressure valve does not become operative until the drop ball is dropped or pumped down. From this point on like Differential Fill-up Shoe, this model Auto Fill Cement Float Shoe acts as conventional Floating Equipment. All Auto fill Cement Float Shoes are PDC drillable. AUTO FILL CEMENT FLOAT COLLAR MODEL: WC-CFC-A, PRODUCT No.: WC-30207 The Auto Fill Cement Float Collar permits the casing to fill automatically while being run into the hole. The valve is always in the open position allowing maximum filling of the casing as it is lowered into the well bore. This is especially effective on liner jobs and sensitive hole conditions. The circulation may be established at any time during or after casing is run. The flapper type back pressure valve does not become operative until the drop ball is dropped or pumped down. Like Differential Fill-up Equipment, the Collar is activated by the same ball. From this point on, like Differential Fill-up Collar, this Auto Fill Cement Float Collar acts as conventional Floating Equipment. All Auto Fill Cement Float Collars are PDC drillable. CEMENT BASKET MODEL: WC-CBT, PRODUCT No.: WC-31101 The Cementing Basket is designed to run on the casing string or liner to support a cement column to prevent contamination of a lower zone or to keep hydrostatic head of a column from breaking down a weak formation. The Basket consists of flexible steel springs that support overlapping rubber liners. The Basket is placed on the casing with movement limited by pipe couplings or by welding the ring of the basket directly to the casing. Stop rings may also be used to selectively space the Baskets between Collars without welding. BUTT-WELD CEMENT FLOAT COLLAR & SHOE MODEL: WC-BCFC & WC-BCFS PRODUCT No.: WC-30208 & WC-30108 Cement/Poppet-type Float equipment offers dependable performance for all classes oil and gas wells. The valves prevent cement backflow, provide casing buoyancy during run in, and act as internal BOPs during the process of running and cementing the casing. Float equipment is manufactured to match customer casing specification. All ball type cement float collars are PDC drillable. Butt-Weld Casing Collar O.D. matches with the casing O.D. and upper end is only beveled, not recessed for directly welding to the Casing pipe. SLIP-ON CEMENT FLOAT COLLAR & SHOE MODEL: WC-SCFC & WC-SCFS PRODUCT No.: WC-30209 & WC-30109 Cement/Poppet-type Float equipment offers dependable performance for all classes oil and gas wells. The valves prevent cement backflow, provide casing buoyancy during run in, and act as internal BOPs during the process of running and cementing the casing. Float equipment is manufactured to match customer casing specification. All poppet type cement float collars are PDC drillable. Slip-ON Casing Collar O.D. matches with the casing O.D. and upper end is only beveled, not recessed for directly welding to the Casing pipe
Specification Guide: Model: WC-SCCZ & WC-SCZW3 STAGE CEMENTING COLLAR
Casing SIZE in Weight (lb/ft) Threaded & Coupled 13.0 14.0 15.5 5 1/2 17.0 20.0 20.0 23.0 17.0 20.0 23.0 26.0 29.0 26.0 29.0 32.0 35.0 38.0 32.0 35.0 38.0 29.3 32.3 36.0 40.0 40.0 43.5 47.0 47.0 53.5 Size Stage Collar 51/2 13-15.5 J-55 5 1/2 17-20 N-80 & 17 P-110 5 1/2 20-23 P-110 7 17-23 N-80 7 26-29 N-80 7 32-38 N-80 &26-29 P-110 Tensile Strength (lb) Drilled Out ID Max OD of Tool Model- WC-SCCZ Min ID Lower Inner Sleeve Max OD of Trip Plug Min ID upper inner Sleeve Max OD Shut-off Plug Nose WC-DFFP Indicating Plug Nose OD
4.919 4.812 4.710 6.415 6.200 8.281 4.495 4.687 4.935 5.656 6.625 3.620 3.781 3.870 4.281
2.906
622,000
6.200
7 32-38 P-110 9 5/8 29.3-40 J-55 9 5/8 40-47 M-80 & 43.5 P-110 9 5/8 47-53.5 P-110
918,000
6.020
422,000
9 5/8
701,000 1,170,000
8.730 8.580
OD
Weight Range
Drilled Out ID
Max Collar OD
H-40, J-55 N-80 S-95, P-110 H-40, J-55 N-80 S-95, P-110 C-95, S-95 P-110
8 RD Short Buttress 8 RD Short Buttress 8 RD Short Buttress 8 RD Short Buttress 8 RD Short Buttress 8 RD Short Buttress 8 RD Short Buttress
491,000 661,000 659,000 961,000 887,000 1,332,000 786,000 928,000 1,054,000 1,350,000 1,420,000 1,856,000 1,548,000 1,938,000 12.090 15.094 12.343 15.06 8.00 8.625 9.234 11.375 7.00 12.687
Features: to use a free-fall opening plug Therefore, it is not restricted to well inclination.
Internal closing structure and anti-rotation mechanism protect the closing sleeve from damage while drilling out the opening and closing seats. All internal parts are made of easily drillable material. Opening pressure adjustable upon customer request.
Specification Guide: Casing Weight kg/m 25,30 5 /2 29.76 34.23 38 69 7 43.16 47.62 44.20 7-5/8 50.15 58 04 59.53 9-5/8 64.74 69.94 75.90 10 1/4 82.59 90.33 lb/ft 17.00 20.00 23.00 26.00 29.00 32.00 29.70 33.70 39.00 40.00 43.50 47.00 51.00 55.50 60.70 302 11.890 282.5 11.122 230 9.055 210 8.268 172 6.772 Maximum OD mm in Drill-out ID mm 124 121 119 159 157 155 175 172 168 224 222 221 250 248 245 in 4.882 4.764 4.685 6 260 6.181 6.102 6.890 6.772 6.614 8.819 8.740 8 701 9.843 9.764 9.646 1210 47.992 1170 46 063 1120 44.094 930 36.614 780 30.709 Over All Length mm in
Casing Size in