Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Edition: 13 Released
Type number: Type name: Type scope (per BSS): Candidate for Standard
Type limitations (per BSS): 1) The union of all observed cells per BSS for the detailed measurement types 1, 2, 3, 4, 5, 6, 19 (if used as Detailed), 26, 28 (if used as Detailed), 29 (if used as Detailed), 31 (if used as detailed), 34 (if used as Detailed) must not exceed 40 cells. Type definition: Set of counters related to the traffic evaluation per telecom procedures
Traffic measurements
Counter - 1
Evolium
C01
Counter Name : NB_IMM_ASS_SUCC_MT SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of immediate assignment plus SDCCH normal assignment successes for Mobile Terminating procedure. Trigger condition: Whenever an 48.058 ESTABLISH INDICATION message is received from a CELL, with the L3_INFORMATION field including a 44.018 PAGING RESPONSE message. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Success
Edition: 13 Released
Page 2
C02
Counter Name : NB_IMM_ASS_SUCC_MO SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of immediate assignment successes for Mobile Originating procedure.
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Success
MC02 = C02 = C02a+C02b+C02c+C02d+C02e+C02f+C02g+C02h+C02i. The following counters C02a/b/c/d/e/f/g/h/i provide the distribution of the MO telecom procedures on Trigger condition: External comment:
--
C02a
Counter Name : NB_IMM_ASS_SUCC_MO_LOC_UPD SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: case: Location Update request (except the "follow on" procedure) Trigger condition: Whenever an 48.058 ESTABLISH INDICATION message is received from a cell, with the L3 INFORMATION field containing a 44.018 L3 message with an MIE message type set to LOCATION UPDATING REQUEST and with an MIE Location updating type not set to a RESERVED value and a bit FOR set to 0.
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Success
Edition: 13 Released
Page 3
C02b
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: case: SMS procedure on SDCCH Trigger condition: Whenever an 48.058 ESTABLISH INDICATION message is received from a CELL, with the L3 INFORMATION field containing a 44.018 L3 message with an MIE message type set to CM SERVICE REQUEST and with an MIE CM service type set to "SMS". This counter is incremented only if the L3 info message received has to be forwarded to the MSC.
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Success
C02c
Counter Name : NB_IMM_ASS_SUCC_MO_SUP_SERV SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: case: Supplementary Service Trigger condition: Whenever an 48.058 ESTABLISH INDICATION message is received from a CELL, with the L3 INFORMATION field containing a 44.018 L3 message with an MIE message type set to CM SERVICE REQUEST and with an MIE CM service type set to "Supplementary Service". This counter is incremented only if the L3 info message received has to be forwarded to the MSC.
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Success
Edition: 13 Released
Page 4
C02d
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: case: Location Update request ("follow on" procedure) Trigger condition: Whenever an 48.058 ESTABLISH INDICATION message is received from a CELL, with the L3 INFORMATION field containing a 44.018 L3 message with an MIE message type set to LOCATION UPDATING REQUEST and with an MIE Location updating type not set to a RESERVED value and a bit FOR set to 1.
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Success
C02e
Counter Name : NB_IMM_ASS_SUCC_MO_CM_REEST SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: case: CM Re-establishment procedure Trigger condition: Whenever an 48.058 ESTABLISH INDICATION message is received from a CELL, with the L3 INFORMATION field containing a 44.018 L3 message with an MIE message type set to CM RE-ESTABLISHMENT REQUEST message. This counter is incremented only if the L3 info message received has to be forwarded to the MSC.
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Success
Edition: 13 Released
Page 5
C02f
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: MC02f=C02f, number of immediate assignment successes for Mobile Originationg procedure, in case of L3 Info (within 48.058 ESTABLISH INDICATION) unknown by the BSC but transferred to the MSC. Trigger condition: External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Success
C02g
Counter Name : NB_IMM_ASS_SUCC_MO_IMSI_DETACH SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: MC02g=C02g, number of immediate assignment successes for Mobile Originationg procedure, in case of IMSI Detach Indication. Trigger condition: Whenever an 48.058 ESTABLISH INDICATION message is received from a CELL, with L3_INFORMATION field containing a 44.018 L3 message with an MIE message type set to IMSI DETACH INDICATION. This counter is incremented only if the L3 info message received has to be forwarded to the MSC. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Success
Edition: 13 Released
Page 6
C02h
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: case: normal or emergency call establishment Trigger condition: Whenever an 48.058 ESTABLISH INDICATION message is received from a CELL, with the L3 INFORMATION field containg a 44.018 L3 message with an MIE message type set to CM SERVICE REQUEST and an MIE CM service type set to either : - "emergency call establishment", - or "mobile originating call establishment" This counter is incremented only if the L3 info message received has to be forwarded to the MSC.
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Success
Edition: 13 Released
Page 7
C02i
Counter Name : NB_IMM_ASS_SUCC_MO_LCS SFD reference : 3BK 10204 0540 DTZZA ("Location services (LCS)") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: case: Mobile originated LCS procedure on SDCCH Trigger condition: Whenever an 48.058 ESTABLISH INDICATION message is received from a cell, with the L3 INFORMATION field containing a 44.018 L3 message with an MIE message type set to CM SERVICE REQUEST and with an MIE CM service type set to "Location Services" (LCS). This counter is incremented only if the L3 info message received has to be forwarded to the MSC
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Success
C03
Counter Name : NB_OUT_SDCCH_HO_SUCC SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: MC03=C03, Number of outgoing SDCCH handover (any kind) successes. Trigger condition: External SDCCH handover: whenever 48.008 CLEAR COMMAND (cause= "handover successful") is received on the serving BSC on the SDCCH channel. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 8
C04
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: MC04=C04, number of immediate assignment preparation failures due to congestion. Trigger condition: All SDCCH sub-channels in the required cell were either Busy or Out of Service, when the 48.058 CHANNEL REQUIRED message was received. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Failure
C07
Counter Name : NB_SDCCH_DROP_OUT_HO SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: MC07=C07, Number of SDCCH drops during any outgoing SDCCH handover. Trigger condition: Internal inter-cell SDCCH handover: whenever the timer supervising the handover procedure (T3103) External comment:
--
Edition: 13 Released
Page 9
C10
Counter Name : NB_INC_SDCCH_HO_SUCC SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: MC10=C10, Number of incoming SDCCH handover (any kind) successes. Trigger condition: Internal inter-cell or external SDCCH handover: whenever a 44.018 HANDOVER COMPLETE message is received on Abis interface from the target cell for an SDCCH Sub-channel. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 10
C137
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: MC137=C137, Number of SDCCH drops in SDCCH established phase due to BSS problem.It may happen that several causes of failures mentioned below are detected consecutively. In that case, the counter will only be incremented once, as soon as the call is released. Trigger condition: 1) LapD failure detected during the stable phase of an SDCCH transaction. 2) SDCCH was released due to 48.058 ERROR REPORT with any cause value being received during the stable phase of an SDCCH transaction. 3) Telecom Supervisory module caused the call to be cleared. 4) SDCCH was released due to 0180 CLEAR_CMD message being received from BSSAPduring the stable phase of an SDCCH transaction : O&M has disabled the DTC
Sub domain-1: Established Phase Sub domain-2: SDCCH Sub domain-3: Failure
Edition: 13 Released
Page 11
C138
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: Number of SDCCH drops on SDCCH established phase due to radio link failure (radio link timeout or Lapdm timer expiry). Trigger condition: 1) Whenever a 48.058 CONNECTION FAILURE INDICATION message with a cause value of "radio link failure" is received on Abis interface for an SDCCH channel. 2) Whenever an 48.058 ERROR INDICATION message is received on Abis interface and leads to a loss of channel.
Sub domain-1: Established Phase Sub domain-2: SDCCH Sub domain-3: Failure
Edition: 13 Released
Page 12
C13a
Counter Name : NB_TCH_NOR_ASS_QUEUED SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Traffic Load Counter definition: Number of TCH (in HR or FR usage) normal assignment requests that are put in BSC queue. Trigger condition: Further to the receipt of a 48.008 ASSIGNMENT REQUEST message for TCH, the counter is incremented: i) upon the sending of a 48.008 QUEUING INDICATION message if the queuing is authorised by the MSC, or, ii) when the assignment request is queued in the cell if the queuing is not authorised by the MSC and the parameter QUEUE_ANYWAY is set, or, iii) when the assignment request is queued in the cell if the queuing is not authorised by the MSC and the request has its pre-emption indicator set (provided that the flag EN_TCH_PREEMPT is set to 'Enable'). External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3:
Edition: 13 Released
Page 13
C13b
Counter Name : NB_INC_EXT_TCH_HO_QUEUED SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Traffic Load Counter definition: Number of TCH (in HR or FR usage) incoming external handover requests that are put in BSC queue Trigger condition: Further to the receipt of a 48.008 HANDOVER REQUEST message for TCH, the counter is incremented: i) upon the sending of a 48.008 QUEUING INDICATION message if the queuing is authorised by the MSC, or, ii) when the handover request is queued in the cell if the queuing is not authorised by the MSC and the request has its pre-emption indicator set (provided that the flag EN_TCH_PREEMPT is set to 'Enable'). Note: MC13b = C13b External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Handover Sub domain-3: TCH
Edition: 13 Released
Page 14
C147
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: MC147=C147, Number of incoming internal or external SDCCH handovers -whose target SDCCH channel is allocated by the BSC. Trigger condition: Whenever a 48.058 CHANNEL ACTIVATION message is about to be sent on Abis Interface to activate an SDCCH channel for any handover purposes. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Handover Sub domain-3: SDCCH
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
C148
Counter Name : NB_IMM_ASS_ALLOC SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of immediate assignment plus SDCCH normal assignments -whose SDCCH channel is allocated by the BSC. Trigger condition: Whenever a 48.058 CHANNEL ACTIVATION message is about to be sent on Abis Interface to activate an SDCCH channel for any purpose other than handover. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3:
Edition: 13 Released
Page 15
C149
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of immediate assignment -execution failures due to MS access problem. Trigger condition: Whenever the timer supervising the Immediate Assignment Procedure (T3101) expires during the establishment of an SDCCH sub-channel. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Failure
Edition: 13 Released
Page 16
C14a
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of TCH (in HR or FR usage) drops due to BSS problem during any TCH handover preparation and execution phases. This counter is incremented on the cell on which the problem occurs(In the case of internal inter-cell handovers, it is not incremented on both serving and target cell). For problems that are not related to a specific cell, the counter related to the serving cell will be incremented. It may happen that several causes of failures mentioned below are detected consecutively. In that case, the counter will only be incremented once, as soon as the handover procedure fails. Trigger condition: 1) Whenever the BSC receives on Abis interface from the target cell negative acknowledgment to the TCH channel activation involved in the handover procedure. 2) Whenever the timer supervising the Channel Activation procedure (T9103) expires on the target cell during activation of a TCH channel involved in the handover procedure. 3) Whenever an 48.058 ERROR REPORT message with a cause value of "O&M intervention" is received on Abis interface from either the serving or the target cell during the external or internal inter-cell handover procedure and leads to a transaction failure. 4) Whenever an 48.058 ERROR REPORT message with a cause value of "O&M intervention" is received on Abis interface on either the old or the new channel during the internal intra-cell handover procedure and leads to a transaction failure. 5) Whenever an 48.058 ERROR REPORT message on SAPI 0 with a cause value of "message sequence error" is received on Abis interface from the serving cell between the sending of the 48.058 CHANNEL ACTIVATION message and the reception of the 48.058 CHANNEL ACTIVATION ACKNOWLEDGMENT during the internal inter-cell TCH handover and leads to a transaction failure. 6) Whenever an 48.058 ERROR REPORT message on SAPI 0 with a cause value of "message sequence error" is received on Abis interface on the old channel between the sending of the 48.058 CHANNEL ACTIVATION message and the reception of the 48.058 CHANNEL ACTIVATION ACKNOWLEDGE during the internal intra-cell TCH handover and leads to a transaction failure. 7) Whenever a LAPD failure related to either serving or target cell is reported to the Layer 3 of the BSC (for an RSL supporting a TCH transaction for handover purpose) and leads to a transaction failure. 8) Whenever an TCH handover abortion is initiated by the BSS O&M FAULT MANAGEMENT application part or by the BSS TELECOM application part as the result of a system defense action which may be due to BSS equipment failures external to the BSC (e.g. RSL failure or CU recovery failure), or due to BSC internal hardware problems (e.g. TCU failure or DTC failure) or due to BSC internal software problems (e.g. inconsistencies detected between software modules or lack of software resources (memory, timer reference, file reference...) or communication problems between different processor boards). 9) Whenever a 48.058 CONNECTION FAILURE INDICATION message with a cause value of "remote transcoder failure" is received on Abis interface from the old channel between the sending of the 48.058 CHANNEL ACTIVATION message and the reception of the 48.058 CHANNEL ACTIVATION ACKNOWLEDGE during an internal intra-cell or inter-cellTCH handover procedure and leads to a transaction failure. Notes : 1. TCH handover failures which are due to O&M operator actions on BTS or BSC should not be counted. Indeed, in case of numerous failures due to O&M commands, this counter will overestimate failures which are due to problems which are internal to the BSS. However, due to the current implementation which does not allow to be aware of the origin of the failure, O&M operator actions will also be counted. 2. It may happen that the counter can not be incremented since it is implemented within the faulty entity.
Edition: 13 Released BSC Counters Catalogue - B9 3BK 11203 0102 DSZZA
Page 17
Evolium
External comment:
--
mechanism:
unit: :
C14c
Counter Name : : Integer SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
NB_TCH_DROP_EST_PHAS_BSS_PB Counter
Measured unit:
Length 4
number
Technology
GSM
Domain: Quality of Service Counter definition: Number of TCH (in HR or FR usage) drops in TCH established phase due to BSS problem. It may happen that several causes of failures mentioned below are detected consecutively. In that case, the counter will only be incremented once, as soon as the call is released. Trigger condition: 1) Whenever an 48.058 ERROR REPORT message with a cause value of "O&M intervention" is received on Abis interface after TCH seizure and leads to a loss of call. 2) Whenever an 48.058 ERROR REPORT message on SAPI 0 with a cause value of "message sequence error" is received on Abis interface after TCH seizure and leads to a loss of call. 3) Whenever a LAPD failure is reported to the Layer 3 of the BSC (for an RSL supporting a TCH transaction after successful TCH seizure) and leads to a loss of call. 4) Whenever a TCH call release is initiated by the BSS O&M FAULT MANAGEMENT application part or by the BSS TELECOM application part as the result of a system defense action which may be due to BSS equipment failures external to the BSC (e.g. RSL failure or CU recovery failure), or due to BSC internal hardware problems (e.g. TCU failure or DTC failure) or due to BSC internal software problems (e.g. inconsistencies detected between software modules or lack of software resources (memory, timer reference, file reference...) or communication problems between different processor boards). Notes : 1. TCH call releases which are due to O&M operator actions on BTS or BSC should not be counted. Indeed, in case of numerous failures due to O&M commands, this counter will overestimate failures which are due to problems which are internal to the BSS. However, due to the current implementation which does not allow to be aware of the origin of the failure, O&M operator actions will also be counted. 2. It may happen that the counter can not be incremented since it is implemented within the faulty entity. External comment:
--
Sub domain-1: Established Phase Sub domain-2: TCH Sub domain-3: Failure
Edition: 13 Released
Page 18
C15a
Counter Name : NB_INC_IDR_ALLOC SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Traffic Load Counter definition: MC15a=C15a, Number of incoming internal directed retry (towards a TCH channel in HR or FR usage) whose target channel is allocated by the BSC. Trigger condition: The counter is incremented on the target cell whenever the 48.058 CHANNEL ACTIVATION message of a TCH channel is about to be sent during an internal directed retry. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Directed Retry Sub domain-3: Internal
Edition: 13 Released
Page 19
C15b
Counter Name : NB_INC_TCH_HO_ALLOC SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Traffic Load Counter definition: Number of incoming TCH (in HR or FR usage) handover (internal or external) -whose target channel is allocated by the BSC. Since there are no reliable means at the target BSC to distinguish external directed retry from external handover, the external directed retries are counted by this counter. Trigger condition: The counter is incremented on the target cell whenever the 48.058 CHANNEL ACTIVATION message of a TCH channel is about to be sent during any handover procedure. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Handover Sub domain-3: TCH
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
C161a
Counter Name : NB_DTAP_MO_NOR_ASS_SUCC SFD reference : RFD 3BKA55CBR035191 Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of mobile originating normal assignment - DTAP successes. Trigger condition: Whenever a 44.018 CONNECT ACK is received on Abis interface. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: DTAP Assignment Sub domain-3: Success
Edition: 13 Released
Page 20
C161b
Counter Name : NB_DTAP_MT_NOR_ASS_SUCC SFD reference : RFD 3BKA55CBR035191 Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of mobile terminating normal assignment - DTAP successes. Trigger condition: Whenever a 44.018 CONNECT ACK is sent on Abis interface. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: DTAP Assignment Sub domain-3: Success
C162a
Counter Name : NB_TCH_DROP_DTAP_EST_PHAS_RLF SFD reference : RFD 3BKA55CBR035191 Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of TCH (in HR or FR usage) drops in TCH DTAP established phase due to radio link failure (radio link timeout or Lapdm timer expiry). After an external handover, the target BSC considers that the CONNECT ACK has not already been Trigger condition: 1) Whenever a 48.058 CONNECTION FAILURE INDICATION message with a cause value of "radio link failure" is received on Abis interface for a TCH channel (after successful DTAP establishment). 2) Whenever an 48.058 ERROR INDICATION message is received on Abis interface and leads to a loss of External comment:
--
Sub domain-1: Established Phase Sub domain-2: TCH Sub domain-3: Failure
Edition: 13 Released
Page 21
C162b
Counter Name : NB_TCH_DROP_DTAP_EST_PHAS_BSS_PB SFD reference : RFD 3BKA55CBR035191 Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of TCH (in HR or FR usage) drops in TCH DTAP established phase due to BSS problem. It may happen that several causes of failures mentioned below are detected consecutively. In that case, the counter will only be incremented once, as soon as the call is released. After an external handover, the target BSC considers that the CONNECT ACK has not already been Trigger condition: 1) Whenever an 48.058 ERROR REPORT message with a cause value of "O&M intervention" is received on Abis interface after TCH seizure and leads to a loss of call. 2) Whenever an 48.058 ERROR REPORT message on SAPI 0 with a cause value of "message sequence error" is received on Abis interface after TCHDTAP establishment and leads to a loss of call. 3) Whenever a LAPD failure is reported to the Layer 3 of the BSC (for an RSL supporting a TCH transaction after successful TCH seizure) and leads to a loss of call. 4) Whenever a TCH call release is initiated by the BSS O&M FAULT MANAGEMENT application part or by the BSS TELECOM application part as the result of a system defense action which may be due to BSS equipment failures external to the BSC (e.g. RSL failure or CU recovery failure), or due to BSC internal hardware problems (e.g. TCU failure or DTC failure) or due to BSC internal software problems (e.g. inconsistencies detected between software modules or lack of software resources (memory, timer reference, file reference...) or communication problems between different processor boards). Notes : 1. TCH call releases which are due to O&M operator actions on BTS or BSC should not be counted. Indeed, in case of numerous failures due to O&M commands, this counter will overestimate failures which are due to External comment:
--
Sub domain-1: Established Phase Sub domain-2: TCH Sub domain-3: Failure
Edition: 13 Released
Page 22
C162c
Counter Name : NB_TCH_DROP_DTAP_EST_PHAS_REM_TRANS_F SFD reference : RFD 3BKA55CBR035191 Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of TCH (in HR or FR usage) drops in TCH DTAP established phase due to remote transcoder failure. This counter is not concerned by the channel change procedure. Trigger condition: Whenever a 48.058 CONNECTION FAILURE INDICATION message with a cause value of "remote transcoder failure" is received on Abis interface for a TCH channel (for an established call). External comment:
--
Sub domain-1: Established Phase Sub domain-2: TCH Sub domain-3: Failure
Edition: 13 Released
Page 23
C170
Counter Name : NB_CALL_TFO SFD reference : 3BK 10204 0478 DTZZA ("Tandem Free Operation") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of TCHs assigned in the serving cell for which TFO has been successfully established. Trigger condition: For each assigned TCH, the counter is incremented the first time a 48.058 TFO REPORT message is received by the BSC, indicating that TFO is established (i.e. TFO = 1 in the TFO Status IE). Note 1: This counter shall be incremented only once per assigned TCH (i.e. the first time it is received for the assigned TCH). Note 2: A TCH is seen as assigned in the serving cell between the sending of 48.058 CHANNEL ACTIVATION message and the receipt of the 48.058 RF CHANNEL RELEASE message. This means that the counter can be incremented either if the TCH is assigned to serve a normal assignment or if the TCH is assigned to serve an incoming internal (inter-cell or intra-cell) or external handover. External comment:
--
Edition: 13 Released
Page 24
C171
Counter Name : NB_TFO_CODEC_REQ SFD reference : 3BK 10204 0478 DTZZA ("Tandem Free Operation") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of codec mismatch resolutions or codec optimisations requested to the BSC. Trigger condition: Whenever a 48.058 REMOTE CODEC CONFIGURATION REPORT is received by the BSC. External comment:
--
C442
Counter Name : NB_TIMES_TRAF_DETECTED_HIGH SFD reference : 3BK 10204 0326 DSZZA ("Traffic Management in HO Algorithms") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Number of times the traffic_load is "high", i.e. when a certain number (N_TRAFFIC_LOAD) of traffic averages (AV_LOAD) verify each: AV_LOAD > HIGH_THRESHOLD. The traffic_load is evaluated per cell at each A_TRAFFIC_LOAD period. This counter permits to tune the following parameters: A_TRAFFIC_LOAD, N_TRAFFIC_LOAD and HIGH_THRESHOLD. Trigger condition: At each A_TRAFFIC_LOAD period, whenever the BSC decision process detects a "high" traffic_load. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Normal Assignment Sub domain-3:
Edition: 13 Released
Page 25
C443
Counter Name : NB_TIMES_TRAF_DETECTED_LOW SFD reference : 3BK 10204 0326 DSZZA ("Traffic Management in HO Algorithms") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Number of times the traffic_load is "low", i.e. when a certain number (N_TRAFFIC_LOAD) of traffic averages (AV_LOAD) verify each: AV_LOAD < LOW_THRESHOLD. The traffic_load is evaluated per cell at each A_TRAFFIC_LOAD period. This counter permits to tune the following parameters: A_TRAFFIC_LOAD, N_TRAFFIC_LOAD and LOW_THRESHOLD. This counter relates to the number of free TCH timeslots. Trigger condition: At each A_TRAFFIC_LOAD period, whenever the BSC decision process detects a "low" traffic_load. Remark : the number of "indefinite" traffic load can be deduced from the counters NB_LOW_TRAFFIC_LOAD and NB_HIGH_TRAFFIC_LOAD over the Accumulation Period.
Sub domain-1: Resource Allocation & Management Sub domain-2: Sub domain-3:
External comment:
--
Edition: 13 Released
Page 26
C612a
Counter Name : NB_TCH_NOR_ASS_PREP_FAIL_NO_QUEUE SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: Number of TCH (in HR or FR usage) normal assignment preparation failures because of the non-queuing of the ASSIGNMENT REQUEST message. Case: 48.008ASSIGNMENT REQUEST on TCH (in HR or FR usage) is received when no TCH is available in the cell. The request is rejected (by 48.008ASSIGNMENT FAILURE, cause: "no radio resource available"), because the queuing procedure is either: 1) disabled within the BSC (i.e. (T11=0 and QUEUE_ANYWAY=0), OR (T11_forced=0 and QUEUE_ANYWAY=1)), or 2) enabled within the BSC, i.e. T11 <> 0, but not requested by the MSC when QUEUE_ANYWAY=0.
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3: Failure
Trigger condition: The counter is incremented upon the sending of 48.008ASSIGNMENT FAILURE (cause: "no radio resource available") for a TCH channel because no TCH is available and either the queing is disabled in the BSC (T11=0 and QUEUE_ANYWAY=0, or T11_forced=0 and QUEUE_ANYWAY=1), or the queing is enabled, QUEUE_ANYWAY=0, and the MSC does not request a queuing. External comment:
--
Edition: 13 Released
Page 27
C612b
Counter Name : NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_FULL SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: MC612b=C612b, Case: 48.008ASSIGNMENT REQUEST on TCH (in FR or HR usage) is received when no TCH is available in the cell. The queuing is enabled within the BSC, but the request is rejected (by 48.008ASSIGNMENT FAILURE, cause: "no radio resource available"), because the queue is full and no request of lower priority can be dequeued from the BSC queue. Trigger condition: The counter is incremented upon the sending of 48.008ASSIGNMENT FAILURE (cause: "no radio resource available") for a TCH channel because the queue is full and no request of lower priority can be dequeued. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3: Failure
Edition: 13 Released
Page 28
C612c
Counter Name : NB_TCH_NOR_ASS_PREP_FAIL_T11_EXP SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: Case: 48.008ASSIGNMENT REQUEST is queued because no TCH (in HR or FR usage) is available in the cell, timer T11 (case MSC requests for queuing whatever QUEUE_ANYWAY value may be) or timer T11_forced (case QUEUE_ANYWAY=1, i.e. the queuing is forced within the BSC) is started, and no free TCH can be found before timer expiry, consequently the request is rejected (by 48.008 CLEAR REQUEST cause: "no radio resource available"). Remark: If an internal directed retry is attempted and failed while T11/T11_forced is running, the request is un-holded and the BSC waits for the expiry of the relevant timer. Consequently, this counter must not be incremented upon the failure of an internal directed retry. Trigger condition: The counter is incremented upon the sending of 48.008 CLEAR REQUEST (cause : "no radio resource available") -following the expiry of T11 or T11 forced for a queued TCH normal assignment. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3: Failure
Edition: 13 Released
Page 29
C612d
Counter Name : NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_REJ SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: Case: 48.008ASSIGNMENT REQUEST is queued because no TCH (in HR or FR usage) is available in the cell, timer T11 (case MSC requests for queuing whatever QUEUE_ANYWAY value may be) or timer T11_forced (case QUEUE_ANYWAY=1, i.e. the queuing is forced within the BSC) is started, and before the timer expiry, the request is dequeued due to the receipt of a higher priority request (i.e. 48.008ASSIGNMENT REQUEST) : the BSC sends 48.008ASSIGNMENT FAILURE (cause: "no radio resource available") for the first transaction. Remark: As soon as an internal directed retry is attempted, the request is blocked within the BSC and cannot be dequeued by a higher priority request. Trigger condition: The counter is incremented upon the sending of the 48.008ASSIGMENT FAILURE (cause: "no radio resource available") for a dequeued TCH request (i.e. normal assignment) due to the receipt of a higher priority request. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3: Failure
Edition: 13 Released
Page 30
C621
Counter Name : NB_TCH_DROP_OUT_HO_EXEC_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: Number of TCH drops during the execution of any TCH outgoing handover, per TRX. MC621 = C621 Trigger condition: 1) Inter-cell TCH handover: whenever the timer supervising the handover procedure (T3103) expires. 2) External TCH handover: whenever the timer supervising the handover procedure on the serving cell (T8) expires. 3) Intra-cell TCH handover: whenever the timer supervising the handover procedure (T3107) expires.
Edition: 13 Released
Page 31
C701a
Counter Name : NB_TCH_FR_REQ SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Number of TCH normal assignments requests from mobiles with following speech capability (after possible filtering of the MSC) : - FR only mobiles ; - FR and EFR only ; - HR only ; - EFR&HR only ; - EFR only. Trigger condition: Receipt of 48.008 ASSIGNMENT REQUEST from the MSC for speech call with : - only GSM speech coding algorithm version 1 full rate allowed ; - only GSM speech coding algorithm version 1 full rate and version 3 full rate allowed ; - only GSM speech coding algorithm version 1 half rate allowed ; - only GSM speech coding algorithm version 1 half rate and version 3 full rate allowed ; - only GSM speech coding algorithm version 3 full rate allowed.
Sub domain-1: Resource Allocation & Management Sub domain-2: Service Sub domain-3:
External comment:
From 3GPP point of view, HR only, EFR&HR only, EFR only are not allowed, as support of FR is mandatory. They are however listed for completion.
Edition: 13 Released
Page 32
C701b
Counter Name : NB_TCH_DR_REQ SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Number of TCH normal assignments requests from dual rate mobiles. Trigger condition: Receipt of 48.008 ASSIGNMENT REQUEST from the MSC for speech call with only GSM speech coding algorithm version 1 full rate and GSM speech coding algorithm version 1 half rate allowed. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Service Sub domain-3:
C701c
Counter Name : NB_TCH_DR_EFR_REQ SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Number of TCH normal assignment requests from mobiles supporting FR, HR and EFR. Trigger condition: Receipt of 48.008 ASSIGNMENT REQUEST from the MSC for speech call with GSM speech coding algorithm version 1 full rate, GSM speech coding algorithm version 1 half rate and GSM speech coding algorithm version 2 full rate allowed. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Service Sub domain-3:
Edition: 13 Released
Page 33
C701d
Counter Name : NB_TCH_AMR_REQ SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Number of TCH normal assignment requests from AMR mobiles. Trigger condition: Receipt of 48.008 ASSIGNMENT REQUEST from the MSC for speech call with GSM speech coding algorithm version 3 full rate or half rate allowed. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Service Sub domain-3:
C701e
Counter Name : NB_TCH_DATA_REQ SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Number of TCH normal assignment requests for data calls. Trigger condition: Receipt of 48.008 ASSIGNMENT REQUEST from the MSC for data call. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Service Sub domain-3:
Edition: 13 Released
Page 34
C702a
Counter Name : NB_TCH_NOR_FR_ALLOC SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: number of TCH normal assignment/mode modify in FR usage - whose channel is allocated in the BSC. Trigger condition: 48.058 CHANNEL ACTIVATION/ MODE MODIFY about to be sent to the BTS, indicating a FR channel with GSM speech coding algorithm version 1, not related to handover. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Service Sub domain-3:
C702b
Counter Name : NB_TCH_NOR_HR_ALLOC SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: number of TCH normal assignment/mode modify in HR usage - whose channel is allocated in the BSC. Trigger condition: 48.058 CHANNEL ACTIVATION / MODE MODIFY about to be sent to the BTS, indicating a HR channel with GSM speech coding algorithm version 1, not related to handover. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Service Sub domain-3:
Edition: 13 Released
Page 35
C702c
Counter Name : NB_TCH_NOR_EFR_ALLOC SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: number of TCH normal assignment/mode modify in EFR usage - whose channel is allocated in the BSC. Trigger condition: 48.058 CHANNEL ACTIVATION/ MODE MODIFY about to be sent to the BTS, indicating a FR channel with GSM speech coding algorithm version 2, not related to handover. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Service Sub domain-3:
C703
Counter Name : NB_TCH_NOR_ASS_ALLOC_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of TCH (in HR or FR usage) normal assignment -whose RTCH channel is allocated in the BSC, per TRX. MC703 = C703 Trigger condition: Whenever a 48.058 CHANNEL ACTIVATION message is about to be sent on Abis Interface to activate a TCH channel for normal assignment. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3:
Edition: 13 Released
Page 36
C704a
Counter Name : NB_TCH_NOR_AMR_FR_ALLOC SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: number of TCH normal assignment/mode modify in FR AMR usage - whose channel is allocated in the Trigger condition: 48.058 CHANNEL ACTIVATION/ MODE MODIFY about to be sent to the BTS, indicating a FR channel with GSM speech coding algorithm version 3, not related to handover. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Service Sub domain-3:
C704b
Counter Name : NB_TCH_NOR_AMR_HR_ALLOC SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: number of TCH normal assignment/mode modify in HR AMR usage - whose channel is allocated in the Trigger condition: 48.058 CHANNEL ACTIVATION/ MODE MODIFY about to be sent to the BTS, indicating a HR channel with GSM speech coding algorithm version 3, not related to handover. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Service Sub domain-3:
Edition: 13 Released
Page 37
C705
Counter Name : NB_TCH_NOR_DATA_ALLOC SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: number of TCH normal assignment/mode modify for data - whose channel is allocated in the BSC. Trigger condition: 48.058 CHANNEL ACTIVATION/ MODE MODIFY about to be sent to the BTS, indicating a data call, not related to handover. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Service Sub domain-3:
Edition: 13 Released
Page 38
C706
Counter Name : NB_EGSM_MS_ACCESS_EXCEPT_LU SFD reference : 3BK 10204 0519 DTZZA ("E-GSM support") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Number of initial accesses for call establishments (except location update) of MS supporting the E-GSM band, on a CELL basis. MC706 = C706 Trigger condition: Whenever a 44.018 CLASSMARK CHANGE message in the context of any establishment causes different from location update is received on Abis interface with a "Mobile Station Classmark 3" or a "Mobile Station Classmark 2" Information Element field specifying that the MS supports the E-GSM band. The counter is incremented only once per SCCP connection in the serving cell, i.e. on receipt of the first 44.018 CLASSMARK CHANGE message.
Sub domain-1: Resource Allocation & Management Sub domain-2: E-GSM Sub domain-3:
External comment:
--
Edition: 13 Released
Page 39
C710
Counter Name : NB_TCH_OUT_HO_REQ_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Nb of TCH outgoing handover requests, per TRX. Intracell, internal intercell and external handovers are counted together. MC710 = C710 Trigger condition: 1) Intracell HO : Whenever the BSC process responsible for the handover procedure starts an intra cell TCH handover procedure. 2) Internal intercell HO : Whenever the BSC process responsible for the handover procedure selects a target cell (among a list of target cells) for internal inter cell TCH handover. 3) External HO : Whenever a 48.008 HANDOVER REQUIRED message with the "cell identification discriminator" set to a value identifying a GSM handover is sent on A interface to the MSC for a TCH handover towards a 2G cell. If more than one 48.008 HANDOVER REQUIRED is sent in the frame of the same Handover procedure, the counter is incremented only once. 48.008 HANDOVER REQUIRED is sent in following situations : 1) An external handover alarm has been raised, with corresponding list of candidate cells. 2) The list of candidate cells for the current alarm has been updated. Note: This counter counts both inter-PLMN and intra-PLMN handover events. External comment:
--
Edition: 13 Released
Page 40
C711
Counter Name : NB_TCH_OUT_HO_PREP_FAIL_CONG_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Nb of outgoing TCH handover -preparation failures due to congestion, per TRX. Intracell, internal intercell and external handovers are counted together. MC711 = C711 Trigger condition: 1) Intracell HO : Whenever an intra-cell TCH handover cannot be performed, because there is no free TCH channel to allocate the handover to. 2) Internal inter-cell HO : Whenever a internal inter-cell TCH handover cannot be performed, because there is no free TCH channel to allocate the handover to. 3) External HO : Whenever a 48.008 HANDOVER REQUIRED REJECT with cause "no radio resource available" is received from the MSC by the serving BSC for an outgoing external TCH HO related to a 2G target cell. Note : the counter will be incremented for external TCH HO if and only if the parameter RESP_REQ is set to 1. External comment:
--
Edition: 13 Released
Page 41
C712
Counter Name : NB_TCH_OUT_HO_SUCC_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Nb of outgoing TCH handover successes, per TRX. Intracell, internal intercell and external handovers are counted together. MC712 = C712 Trigger condition: 1) External HO: whenever 48.008CLEAR COMMAND (cause="handover successful") is received on the serving BSC on the TCH channel 2) Internal inter-cell HO: whenever 44.018HANDOVER COMPLETE is received from the MS via the target cell on the TCH channel 3) Internal intra-cell HO: whenever 44.018ASSIGNMENT COMPLETE is received from the MS via the cell on the TCH channel Note: This counter counts both inter-PLMN and intra-PLMN handover events. Note: This counter doesnt count hantover to UMTS
External comment:
--
Edition: 13 Released
Page 42
C713
Counter Name : NB_TCH_OUT_HO_FAIL_REV_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Nb of outgoing TCH handover -execution failures due to MS access problem with reversion of the mobile to the old channel. Intracell, internal intercell and external handovers are counted together. MC713 = C713 Trigger condition: 1) External HO : Whenever a 44.018 HANDOVER FAILURE message is received on Abis interface from the serving cell , during an external TCH handover. 2) Internal inter-cell HO : Whenever a 44.018 HANDOVER FAILURE message is received on Abis interface from the serving cell, during an internal inter-cell TCH handover. 3) Intracell HO : Whenever a 44.018 ASSIGNMENT FAILURE message is received on Abis interface on the serving channel, during an internal intra-cell TCH handover. Note: This counter counts both inter-PLMN and intra-PLMN handover events. Note: This counter doesnt count hantover to UMTS,
External comment:
--
Edition: 13 Released
Page 43
C714
Counter Name : NB_TCH_OUT_HO_FAIL_NO_REV_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Nb of outgoing TCH handover -execution failures due to MS access problem without reversion of the mobile to the old channel (call drop). Intracell, internal intercell and external handovers are counted together. MC714 = C714 Trigger condition: 1) External TCH HO : Whenever the timer supervising the handover procedure on the serving cell (T8), expires during an external TCH handover. 2) Internal intercell TCH HO : Whenever the timer supervising the handover procedure (T3103) expires during an internal inter-cell TCH handover. 3) Intracell TCH HO : Whenever the timer supervising the handover procedure (T3107) expires during an internal intra-cell Note: This counter counts both inter-PLMN and intra-PLMN handover events. Note: This counter doesnt count hantover to UMTS,
External comment:
--
Edition: 13 Released
Page 44
C717a
Counter Name : NB_INC_IDR_SUCC_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of incoming directed retry (towards a TCH channel in HR or FR usage) successes, per TRX. MC717a = C717a Trigger condition: Whenever a 44.018 HANDOVER COMPLETE message is received on Abis interface from the target cell for a TCH channel involved in an internal directed retry procedure. External comment:
--
Sub domain-1: Directed Retry Sub domain-2: Internal Sub domain-3: Success
Edition: 13 Released
Page 45
C717b
Counter Name : NB_INC_TCH_HO_SUCC_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of incoming internal and external TCH (in HR or FR usage) handover successes per TRX; since there are no reliable means at the target BSC to distinguish external directed retry from external handover, the external directed retries are counted by this counter. MC717b = C717b Trigger condition: 1) Internal inter-cell or external TCH handover: whenever a 44.018 HANDOVER COMPLETE message is received on Abis interface from the target cell for a TCH channel. 2) Intra-cell handover: whenever an 44.018 ASSIGNMENT COMPLETE message is received on Abis interface on the target channel. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 46
C718
Counter Name : NB_TCH_NOR_ASS_SUCC_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of TCH (in HR or FR usage) normal assignment successes, per TRX. MC718 = C718 Trigger condition: Whenever a 44.018 ASSIGNMENT COMPLETE message is received on Abis interface for a TCH channel that is not involved in a handover procedure. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3: Success
C736
Counter Name : NB_TCH_DROP_EST_PHAS_RLF_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of TCH (in HR or FR usage) drops in TCH established phase due to radio link failure (radio link timeout or Lapdm timer expiry), per TRX. MC736 = C736 Trigger condition: 1) Whenever a 48.058 CONNECTION FAILURE INDICATION message with a cause value of "radio link failure" is received on Abis interface for a TCH channel (after successful seizure). 2) Whenever an 48.058 ERROR INDICATION message is received on Abis interface and leads to a loss of External comment:
--
Sub domain-1: Established Phase Sub domain-2: TCH Sub domain-3: Failure
Edition: 13 Released
Page 47
C739
Counter Name : NB_TCH_DROP_EST_PHAS_REM_TRANS_FAIL_TR SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of TCH (in HR or FR usage) drops in TCH established phase due to remote transcoder failures (per TRX). Trigger condition: The counter is incremented whenever a 48.058 CONNECTION FAILURE INDICATION message with cause "Remote Transcoder Failure" is received on Abis interface for an established TCH connection. The BSC considers a TCH connection as "established" once a 44.018 ASSIGNMENT COMPLETE message (in case of normal assignments or an internal intra-cell handovers) or a 44.018 HANDOVER COMPLETE message (in case of an internal inter-cell incoming HO or an external inter-cell incoming HO) has been received for the TCH connection. Note 1: MC739 = C739. Note 2: The counter is incremented only once per established TCH connection. Thus, even if the BTS sends several 48.058 CONNECTION FAILURE INDICATION messages with cause "Remote Transcoder Failure" for a particular established TCH connection, BSC will increment the counter only once for that connection. External comment:
--
Sub domain-1: Established Phase Sub domain-2: TCH Sub domain-3: Failure
Edition: 13 Released
Page 48
C746b
Counter Name : NB_TCH_NOR_ASS_EXEC_FAIL_RADIO_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: Number of TCH (in HR or FR usage) normal assignment -execution failures due to MS access problem, per TRX. MC746b = C746b Trigger condition: 1) The timer T3107 in the BSS supervising the TCH channel seizure by the mobile expires. 2) The BSC receives a 44.018 ASSIGNMENT FAILURE on the old (SDCCH) channel during the normal assignment procedure except in case of multiband cell, when the normal assignment procedure is performed in the inner zone and the ASSIGNMENT FAILURE is received with the cause "protocol error
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3: Failure
C812
Counter Name : NB_TCH_NOR_ASS_PREP_FAIL_CONG_R_ABIS SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: MC812 = C812 = C612a + C612b + C612c + C612d Trigger condition: External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3: Failure
Edition: 13 Released
Page 49
C850
Counter Name : NB_MULTIBAND_MS_ACCESS_EXCEPT_LU_CELL SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of initial accesses for call establishments (location update apart) initiated by multiband mobile stations. The counter is defined on a per cell basis. A MS is considered as multiband if it supports: - the P-GSM (or E-GSM or R-GSM) and the DCS1800 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM900 and DCS1800 bands", or, - the GSM850 and the DCS1800 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM850 and DCS1800 bands", or, - the GSM850 and the DCS1900 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM850 and DCS1900 bands", or, - the P-GSM (or E-GSM or R-GSM) and the DCS1900 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM900 and DCS1900 bands". Trigger condition: Whenever a 44.018 Classmark Change message in the context of any establishment cause different from location update is received on Abis interface from the MS with a "Mobile Station Classmark 3" Information Element specifying that the MS supports: - the P-GSM (or E-GSM or R-GSM) and the DCS1800 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM900 and DCS1800 bands", or, - the GSM850 and the DCS1800 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM850 and DCS1800 bands", or, - the GSM850 and the DCS1900 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM850 and DCS1900 bands", or, - the P-GSM (or E-GSM or R-GSM) and the DCS1900 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM900 and DCS1900 bands". The counter is incremented only once per SCCP connection in the serving cell, i.e. on receipt of the first 44.018 CLASSMARK CHANGE message. External comment:
--
Edition: 13 Released
Page 50
C901
Counter Name : NB_Suspend_req SFD reference : 3BK 10204 0503 DTZZA ("GPRS suspend / resume for class B mobiles") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: Number of suspend requests. A request could lead to a success, a failure or a stop. Trigger condition: Emission of Suspend request by the BSC to the MFS A suspend message received from MS with a "suspend cause" filtered by BSC will not be counted. Stop causes could be: 1) External handover 2) MS channel failure.
C902
Counter Name : Nb_Suspend_fail SFD reference : 3BK 10204 0503 DTZZA ("GPRS suspend / resume for class B mobiles") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: Number of suspend/resume procedure failures. Trigger condition: Reception of -Suspend nack or resume nack, or expiration of T_GPRS_Resume. External comment:
--
Edition: 13 Released
Page 51
C903
Counter Name : Nb_Suspend_succ SFD reference : 3BK 10204 0503 DTZZA ("GPRS suspend / resume for class B mobiles") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: Number of suspensions successes. Trigger condition: Reception of Resume ack message from MFS. External comment:
--
Edition: 13 Released
Page 52
Type number: Type name: Type scope (per BSS): Candidate for Standard
Type limitations (per BSS): 1) The union of all observed cells per BSS for the detailed measurement types 1, 2, 3, 4, 5, 6, 19 (if used as Detailed), 26, 28 (if used as Detailed), 29 (if used as Detailed), 31 (if used as detailed), 34 (if used as Detailed) must not exceed 40 cells. Type definition: Set of counters related to the availability of the CCCH, SDCCH or TCH channels
Counter - 2
Evolium
C141
Counter Name : AV_NB_TCH_QUEUED SFD reference : No reference. Data collection Status Inspection (polling=10s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
External comment:
--
Domain: Resource Availability & Usage Counter definition: Average number of queued TCH (in HR or FR usage) normal assignment or external handover requests. Trigger condition: At Accumulation Period expiry, all observations of this counter done at each polling period are averaged, i.e. summed and divided by the number of observations. In order to provide one decimal place, the averaged value (real) is multiplied by ten and then rounded up or down to the nearest integer value. Note that the counter value that is indicated in the ASCII file, which can be obtained via the OBSYNT interface, still has to be divided by 10, whereas the value that is provided at the user interface is the correct
Edition: 13 Released
Page 53
C24
Counter Name : AV_NB_NOT_AVAIL_TRX_TS SFD reference : No reference. Data collection Status Inspection (polling=20s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of not available radio timeslots (TRX_TS). Trigger condition: At Accumulation Period expiry, all observations of this counter done at each polling period are averaged, i.e. summed and divided by the number of observations. The averaged value (real) is rounded up or down to the nearest integer value. External comment:
--
Edition: 13 Released
Page 54
C250
Counter Name : AV_NB_AVAIL_TCH SFD reference : No reference. Data collection Status Inspection (polling=20s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of available TCH/PDCH timeslots for traffic usage (i.e. TCH (for HR or FR usage) or Trigger condition: At Accumulation Period expiry, all observations of this counter done at each polling period are averaged, i.e. summed and divided by the number of observations. The averaged value is rounded up or down to the nearest integer value. Note 1: "Available" has here to be understood as the operational state of a timeslot. The timeslot is available if it is not "blocked" or "out of service". External comment:
--
Note 2: The dynamic SDCCH timeslots are not taken into account in this counter.
Edition: 13 Released
Page 55
C26
Counter Name : AV_NB_AVAIL_SDCCH SFD reference : No reference. Data collection Status Inspection (polling=20s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of available static SDCCH sub-channels (i.e. on static SDCCH timeslots). Trigger condition: At Accumulation Period expiry, all observations of this counter done at each polling period are averaged, i.e. summed and divided by the number of observations. The averaged value (real) is rounded up or down to the nearest integer value. Note: "Available" has here to be understood as the operational state of a timeslot. The timeslot is available if it is not "blocked" or "out of service".
External comment:
--
C27
Counter Name : AV_NB_AVAIL_CCCH SFD reference : No reference. Data collection Status Inspection (polling=20s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of available CCCH channels. Trigger condition: At Accumulation Period expiry, all observations of this counter done at each polling period are averaged, i.e. summed and divided by the number of observations. The averaged value (real) is rounded up or down to the nearest integer value. External comment:
--
Edition: 13 Released
Page 56
C28a
Counter Name : AV_NB_BUSY_CS_TS SFD reference : No reference. Data collection Status Inspection (polling=10s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of busy TCH radio timeslot (in FR or HR usage) and busy dynamic SDCCH/8 radio timeslot allocated as TCH. Trigger condition: The BSC takes periodically a sample of the number of busy TCH radio timeslots and busy dynamic SDCCH/8 radio timeslots allocated as TCH. The sampling period is set to the value indicated in the Status Inspection field. At the expiry of the accumulation period, all samples are averaged (i.e. summed and divided by the number of samples). The averaged value is rounded up or down to the nearest value with an accuracy of 0.1. A TCH radio timeslot is considered as busy during the time it is allocated to a given MS for TCH traffic (in HR or FR usage). A dynamic SDCCH/8 timeslot allocated as TCH is considered as busy during the time it is allocated to a given MS for TCH traffic. Note 1: the counter value that is indicated in the ASCII file (which can be obtained via the OBSYNT interface) is an integer value (i.e. it is as if the BSC multiplies by 10 the average). The reported value shall then be divided by 10 afterwards so that the value that is displayed to the end-user is the correct one. Note 2: This counter does not take into account the PDCH radio timeslots allocated to the MFS. External comment:
--
Edition: 13 Released
Page 57
C29a
Counter Name : NB_MAX_SIMUL_BUSY_CS_TS SFD reference : 3BK 10204 0511 DTZZA ("Dynamic SDCCH allocation") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Maximum number of simultaneously busy TCH radio timeslots (in HR or FR usage) and simultaneously busy dynamic SDCCH/8 radio timeslots allocated as TCH. Trigger condition: Whenever a TCH radio timeslot or a dynamic SDCCH/8 radio timeslot allocated as TCH becomes busy, the BSC determines the current number of busy TCH radio timeslots (in HR or FR usage) and busy dynamic SDCCH/8 radio timeslots allocated as TCH. This counter is the maximum value of this number during the accumulation period. External comment:
--
This counter does not take into account the PDCHs allocated to the MFS.
Edition: 13 Released
Page 58
C30
Counter Name : AV_NB_BUSY_SDCCH SFD reference : No reference. Data collection Status Inspection (polling=20s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
External comment:
--
Domain: Resource Availability & Usage Counter definition: Average number of busy SDCCH subchannels, taking into account the following SDCCH sub-channels: 1) Static SDCCH/x sub-channels, 2) Dynamic SDCCH sub-channels which are dynamically allocated on the dynamic SDCCH/8 timeslots. Trigger condition: At Accumulation Period expiry, all observations of this counter done at each polling period are averaged, i.e. summed and divided by the number of observations. In order to provide one decimal place, the average value (real) is multiplied by ten and then rounded up or down to the nearest integer value. Note that the counter value that is indicated in the ASCII file, which can be obtained via the OBSYNT interface, still has to be divided by 10, whereas the value that is provided at the user interface is the correct
Edition: 13 Released
Page 59
C31
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Maximum number of simultaneously busy SDCCH subchannels, taking into account the following SDCCH sub-channels: 1) Static SDCCH/x sub-channels, 2) Dynamic SDCCH sub-channels which are dynamically allocated on the dynamic SDCCH/8 timeslots. Trigger condition: At each 48.058 CHANNEL ACTIVATION (SDCCH subchannel) sent to the cell: C31 = MAX ["old" C31 value (i.e. before the channel activation), number of busy SDCCH subchannels observed for the cell]. External comment:
--
C320a
Counter Name : AV_NB_IDLE_TCH_INTERF_BAND1 SFD reference : No reference. Data collection Status Inspection (polling=20s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of free TCH and free dynamic SDCCH/8 radio timeslots belonging to the interference band 1. This number is updated upon the receipt of 48.058 RF RESOURCE INDICATION. Trigger condition: At Accumulation Period expiry, all observations of this counter done at each polling period are averaged, i.e. summed and divided by the number of observations. The averaged value (real) is rounded up or down to the nearest integer value. External comment:
--
Edition: 13 Released
Page 60
C320b
Counter Name : AV_NB_IDLE_TCH_INTERF_BAND2 SFD reference : No reference. Data collection Status Inspection (polling=20s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of free TCH and free dynamic SDCCH/8 radio timeslots belonging to the interference band 2. This number is updated upon the receipt of 48.058 RF RESOURCE INDICATION. Trigger condition: At Accumulation Period expiry, all observations of this counter done at each polling period are averaged, i.e. summed and divided by the number of observations. The average value (real) is rounded up or down to the nearest integer value. External comment:
--
C320c
Counter Name : AV_NB_IDLE_TCH_INTERF_BAND3 SFD reference : No reference. Data collection Status Inspection (polling=20s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of free TCH and free dynamic SDCCH/8 radio timeslots belonging to the interference band 3. This number is updated upon the receipt of 48.058 RF RESOURCE INDICATION. Trigger condition: At Accumulation Period expiry, all observations of this counter done at each polling period are averaged, i.e. summed and divided by the number of observations. The averaged value (real) is rounded up or down to the nearest integer value. External comment:
--
Edition: 13 Released
Page 61
C320d
Counter Name : AV_NB_IDLE_TCH_INTERF_BAND4 SFD reference : No reference. Data collection Status Inspection (polling=20s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of free TCH and free dynamic SDCCH/8 radio timeslots in FR or HR usage belonging to the interference band 4. This number is updated upon the receipt of 48.058 RF RESOURCE INDICATION. Trigger condition: At Accumulation Period expiry, all observations of this counter done at each polling period are averaged, i.e. summed and divided by the number of observations. The averaged value (real) is rounded up or down to the nearest integer value. External comment:
--
C320e
Counter Name : AV_NB_IDLE_TCH_INTERF_BAND5 SFD reference : No reference. Data collection Status Inspection (polling=20s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of free TCH and free dynamic SDCCH/8 radio timeslots belonging to the interference band 5. This number is updated upon the receipt of 48.058 RF RESOURCE INDICATION. Trigger condition: At Accumulation Period expiry, all observations of this counter done at each polling period are averaged, i.e. summed and divided by the number of observations. The average value (real) is rounded up or down to the nearest integer value. External comment:
--
Edition: 13 Released
Page 62
C34
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Cumulated time (in seconds) during which there is no free FR TCH sub-channel to serve an incoming FR TCH request. A TCH sub-channel is seen as busy: i) if the TCH sub-channel is occupied by a HR or FR CS call, or ii) if the TCH sub-channel is allocated to the MFS to carry PS traffic. Trigger condition: The counter is started when there is no free FR TCH sub-channel to serve an incoming FR TCH request. The counter is stopped when there is a free FR TCH sub-channel to serve an incoming FR TCH request. External comment:
--
Edition: 13 Released
Page 63
C803
Counter Name : TIME_SDCCH_CONGESTION SFD reference : 3BK 10204 0511 DTZZA ("Dynamic SDCCH allocation") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Cumulated time (in seconds) during which the SDCCH request(s) are not served because no SDCCH sub-channel is available. Trigger condition: The time counter is started whenever a SDCCH request cannot be served. The time counter is stopped whenever one of the following conditions is checked: - if a SDCCH sub-channel becomes free and usable on a static SDCCH timeslot or on a dynamic timeslot allocated as SDCCH (i.e. when the timeslot is known from the SDCCH_RM module). The term "usable" means here that the SDCCH sub-channel is not mapped on a TCU in a very high overload state, or, - if a SDCCH request is served successfully. This condition corresponds to the case the SDCCH_RM module requests the TCH_RM module for a dynamic SDCCH timeslot.
External comment:
--
Edition: 13 Released
Page 64
Type number:
Type name: Resource usage on CCCH Type scope (per BSS): One or several cells Candidate for Standard No
Counter - 3
Evolium
channel measurements
Type limitations (per BSS): 1) The union of all observed cells per BSS for the detailed measurement types 1, 2, 3, 4, 5, 6, 19 (if used as Detailed), 26, 28 (if used as Detailed), 29 (if used as Detailed), 31 (if used as detailed), 34 (if used as Detailed) must not exceed 40 cells. 2) The maximum number of CCCH channels per cell that can be measured is limited to 8. Type definition: Set of counters related to the usage of the CCCH channel (PCH load, AGCH load, RACH load)
C8a
Counter Name : NB_PAGING_CMD SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object TRX_TS TRX_TS Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: PCH load: number of 48.058 PAGING COMMAND messages sent either for PS traffic or for CS traffic on Abis towards the selected cell. Trigger condition: Whenever a 48.058 PAGING COMMAND message (either for PS traffic or for CS traffic) is about to be sent on Abis interface to the cell on the related TRX timeslot. External comment:
--
Edition: 13 Released
Page 65
C8b
Counter Name : NB_IMM_ASS_CMD SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object TRX_TS TRX_TS Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: AGCH load: number of 48.058 IMMEDIATE ASSIGN COMMAND messages sent for CS traffic on Abis to the MS. Trigger condition: Whenever a 48.058 IMMEDIATE ASSIGN COMMAND message for CS traffic is about to be sent on Abis interface to the cell on the related TRX timeslot. Note: This counter does not take into account the 48.058 IMMEDIATE ASSIGN COMMAND messages sent for PS traffic.
External comment:
--
C8c
Counter Name : NB_CHAN_REQD SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object TRX_TS TRX_TS Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: RACH load: number of 48.058 CHANNEL REQUIRED received via the selected cell. All the CHANNEL REQUIRED messages are counted whatever the Establishment Cause is. Trigger condition: Whenever a 48.058 CHANNEL REQUIRED message (either for PS traffic or for CS traffic) is received on Abis interface from the cell on the related TRX timeslot. External comment:
--
Edition: 13 Released
Page 66
C8d
Counter Name : NB_IMM_ASS_REJ SFD reference : 3BK 10204 0314 DSZZA ("Immediate Assignment Reject") Data collection Cumulative
Release B8 B9 Measured object TRX_TS TRX_TS Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of 48.058 CHANNEL REQUIRED received while no SDCCH can be allocated by the BSC (congestion), i.e. the number of 44.018IMMEDIATE ASSIGNMENT REJECT sent to the MS via the selected cell. Trigger condition: Whenever a 48.058 IMMEDIATE ASSIGNMENT COMMAND message is about to be sent on Abis interface to the cell on the related TRX timeslot with a "Full Immediate Assignment" Info Element containing a 44.018 IMMEDIATE ASSIGNMENT REJECT message. External comment:
--
Edition: 13 Released
Page 67
Type number:
Type name: Resource usage on SDCCH Type scope (per BSS): One or several cells Candidate for Standard No
Counter - 4
Evolium
channel measurements
Type limitations (per BSS): 1) The union of all observed cells per BSS for the detailed measurement types 1, 2, 3, 4, 5, 6, 19 (if used as Detailed), 26, 28 (if used as Detailed), 29 (if used as Detailed), 31 (if used as detailed), 34 (if used as Detailed) must not exceed 40 cells. 2) The maximum number of SDCCH subchannels per cell that can be observed is limited to 16. Type definition: Set of counters related to the usage of the SDCCH channel
C39
Counter Name : NB_TIMES_SDCCH_BUSY SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object TRX_TS TRX_TS Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Number of times the SDCCH sub-channels belonging to the radio timeslot are busy. Trigger condition: Whenever a 48.058 CHANNEL ACTIVATION message is about to be sent to a CELL to activate an SDCCH Sub-channel on the related TRX timeslot. External comment:
--
Edition: 13 Released
Page 68
C40
Counter Name : TIME_SDCCH_BUSY SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object TRX_TS TRX_TS Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Cumulated time during which the SDCCH sub-channels belonging to the related static or dynamic SDCCH timeslot are busy. Trigger condition: For the related static or dynamic SDCCH timeslot, the counter cumulates, over the Accumulation Period, all time unit during which a SDCCH sub-channel is busy. For each SDCCH allocation of the sub-channel: 1) The counter starts being incremented after the sending of the 48.058 CHANNEL ACTIVATION message concerning an SDCCH sub-channel on the related TRX timeslot. 2) The counter stops being incremented after the reception of a 48.058 RF CHANNEL RELEASE ACKNOWLEDGE message or the expiry of timer T_RCR_ACK twice (supervising 48.058 RF CHANNEL RELEASE message) concerning the SDCCH sub-channel previously activated on the related static or dynamic SDCCH timeslot. Example; Let us consider that on a given static SDCCH/8 timeslot, - SDCCH sub-channel 1 has been busy for 10 s, - SDCCH sub-channel 2 has been busy for 20 s, - SDCCH sub-channel n (with 3 <= n <= 8) has not been busy at all. Then, at the expiry of the reporting period, the value reported by this counter is 10 + 20 = 30 s. External comment:
--
Edition: 13 Released
Page 69
Type number:
Type name: Resource usage on Type scope (per BSS): One or several cells Candidate for Standard No
Counter - 5
Evolium
Type limitations (per BSS): 1) The union of all observed cells per BSS for the detailed measurement types 1, 2, 3, 4, 5, 6, 19 (if used as Detailed), 26, 28 (if used as Detailed), 29 (if used as Detailed), 31 (if used as detailed), 34 (if used as Detailed) must not exceed 40 cells. 2) The maximum number of TCH channels per cell that can be observed is limited to 63. Type definition: Set of counters releated to the usage of the TCH channel (in HR or FR usage)
C370a
Counter Name : NB_TCH_FR_ALLOC SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object TRX_TS TRX_TS Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Number of times a TCH radio timeslot or a dynamic SDCCH/8 timeslot is allocated in FR usage, for normal assignment or handover. Trigger condition: Whenever a 48.058CHANNEL_ACTIVATION message is about to be sent to the cell to activate a full rate TCH channel for normal assignment or handover. External comment:
--
Edition: 13 Released
Page 70
C370b
Counter Name : NB_TCH_HR_ALLOC SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object TRX_TS TRX_TS Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Number of times a TCH radio timeslot or a dynamic SDCCH/8 timeslot is allocated in HR usage (i.e. the upper or lower HR sub-channel of the radio timeslot is allocated), for normal assignment or handover. Trigger condition: Whenever a CHANNEL_ACTIVATION message is about to be sent to the cell to activate a half rate TCH subchannel (either upper or lower) for normal assignment or handover. External comment:
--
Edition: 13 Released
Page 71
C380a
Counter Name : TIME_FR_TCH_BUSY SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object TRX_TS TRX_TS Package 0 1
Measured unit:
Technology
GSM
External comment:
--
Domain: Traffic Load Counter definition: Time (in seconds) during which a TCH radio timeslot or a dynamic SDCCH/8 timeslot in FR usage is busy. Trigger condition: The counter cumulates over the Accumulation Period, per radio timeslot, all unit times during which the TCH FR channel is busy. For each channel allocation: 1) The counter starts being incremented after the sending of the 48.058 CHANNEL ACTIVATION message to the cell concerning a full rate TCH channel for the related TRX timeslot. 2) The counter stops being incremented after the reception of a 48.058 RF CHANNEL RELEASE ACKNOWLEDGE message or the expiry of timer T_RCR_ACK twice (after the sending of the 48.058 RF CHANNEL RELEASE message) concerning the TCH channel previously activated on the related TRX
Edition: 13 Released
Page 72
C380b
Counter Name : TIME_HR_TCH_BUSY SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object TRX_TS TRX_TS Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Time during which a TCH radio timeslot or a dynamic SDCCH/8 timeslot in HR usage is busy. Trigger condition: The counter cumulates, over the Accumulation Period, per half radio timeslot, all unit times during which the TCH HR channel (or the dynamic SDCCH/8 timeslot) is busy. Both "HR timeslots" are counted independently. For each channel allocation: 1) The counter starts being incremented after the sending of the 48.058 CHANNEL ACTIVATION message concerning a dynamic SDCCH/8 timeslot or an half rate TCH sub-channel mapped either on the upper half or the lower half of the related TRX timeslot. 2) The counter stops being incremented when no HR sub-channel is active anymore on the related TRX channel. This is after the reception of a 48.058 RF CHANNEL RELEASE ACKNOWLEDGE message or the expiry of timer T_RCR_ACK twice (after the sending of the 48.058 RF CHANNEL RELEASE message) or the BSC internal radio resource release due to any BSS problem concerning the last HR TCH channel (or the dynamic SDCCH/8 timeslot) which was active on the related TRX timeslot. External comment:
--
Edition: 13 Released
Page 73
C381a
Counter Name : TIME_FR_TCH_BUSY_BY_MULTIBAND_MS SFD reference : 3BK 10204 0286 DSZZA ("Multiband Operation in one Data collection Cumulative
Release B8 B9 Measured object TRX_TS TRX_TS Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Time (in seconds) during which the TCH radio timeslot or the dynamic SDCCH/8 timeslot in FR usage is busy by a multiband mobile station. A MS is considered as multiband if it supports: - the P-GSM (or E-GSM or R-GSM) and the DCS1800 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM900 and DCS1800 bands", or, - the GSM850 and the DCS1800 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM850 and DCS1800 bands", or, - the GSM850 and the DCS1900 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM850 and DCS1900 bands", or, - the P-GSM (or E-GSM or R-GSM) and the DCS1900 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM900 and DCS1900 bands".
Trigger condition: The counter cumulates over the Accumulation Period, per radio timeslot, all unit times during which the TCH FR channel (or the dynamic SDCCH/8 timeslot) is busy. For each channel allocation : 1) The counter starts being incremented after the sending of the 48.058 CHANNEL ACTIVATION message to the cell concerning : - a full rate TCH channel (or the dynamic SDCCH/8 timeslot) for the related TRX timeslot - a mobile which has sent a 44.018 CLASSMARK CHANGE message with a "Mobile Station Classmark 3" Information Element field specifying that the MS supports: - the P-GSM (or E-GSM or R-GSM) and the DCS1800 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM900 and DCS1800 bands", or, - the GSM850 and the DCS1800 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM850 and DCS1800 bands", or, - the GSM850 and the DCS1900 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM850 and DCS1900 bands", or, - the P-GSM (or E-GSM or R-GSM) and the DCS1900 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM900 and DCS1900 bands". 2) The counter stops being incremented after the reception of a 48.058 RF CHANNEL RELEASE ACKNOWLEDGE message or the expiry of timer T_RCR_ACK twice (after the sending of the 48.058 RF CHANNEL RELEASE External comment:
--
Edition: 13 Released
Page 74
C381b
Counter Name : TIME_HR_TCH_BUSY_BY_MULTIBAND_MS SFD reference : 3BK 10204 0286 DSZZA ("Multiband Operation in one Data collection Cumulative
Release B8 B9 Measured object TRX_TS TRX_TS Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Time during which the TCH radio timeslot or the dynamic SDCCH/8 timeslot in HR usage is busy by a multiband mobile station. A TCH radio timeslot (or a dynamic SDCCH/8 timeslot) in HR usage is said busy by a multiband mobile station when one or two HR sub-channels are busy by a multiband mobile station. A MS is considered as multiband if it supports: - the P-GSM (or E-GSM or R-GSM) and the DCS1800 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM900 and DCS1800 bands", or, - the GSM850 and the DCS1800 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM850 and DCS1800 bands", or, - the GSM850 and the DCS1900 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM850 and DCS1900 bands", or, - the P-GSM (or E-GSM or R-GSM) and the DCS1900 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM900 and DCS1900 bands".
Trigger condition: The counter cumulates, over the Accumulation Period, per radio timeslot, all unit times during which the TCH HR channel (or the dynamic SDCCH/8 timeslot) is busy. For each channel allocation: 1) The counter starts being incremented after the sending of the 48.058 CHANNEL ACTIVATION message concerning : - an half rate TCH channel (or a dynamic SDCC/8 timeslot) mapped either on the upper half or the lower half of the related TRX timeslot. - a mobile which has sent a 44.018 CLASSMARK CHANGE message with a "Mobile Station Classmark 3" Information Element field specifying that it is a multiband MS. the MS supports: - the P-GSM (or E-GSM or R-GSM) and the DCS1800 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM900 and DCS1800 bands", or, - the GSM850 and the DCS1800 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM850 and DCS1800 bands", or, - the GSM850 and the DCS1900 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM850 and DCS1900 bands", or, - the P-GSM (or E-GSM or R-GSM) and the DCS1900 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM900 and DCS1900 bands". 2) The counter stops being incremented when no HR sub-channel (or the dynamic SDCCH/8 timeslot) concerning a multiband mobile is active anymore on the related TRX channel. This is after the reception of a 48.058 RF CHANNEL RELEASE ACKNOWLEDGE message or the expiry of timer T_RCR_ACK twice (after the sending of the 48.058 RF CHANNEL RELEASE message) or the BSC internal radio resource release due to any BSS problem, concerning the last HR TCH channel (or the dynamic SDCCH/8 timeslot) related to a multiband mobile. External comment:
--
Edition: 13 Released
Page 75
Type number: Type name: Type scope (per BSS): Candidate for Standard
Type limitations (per BSS): 1) The union of all observed cells per BSS for the detailed measurement types 1, 2, 3, 4, 5, 6, 19 (if used as Detailed), 26, 28 (if used as Detailed), 29 (if used as Detailed), 31 (if used as detailed), 34 (if used as Detailed) must not exceed 40 cells. Type definition: Set of counters related to the TCH handover procedure. The counters are provided per handover category : incoming and outgoing, internal (inter-cell and intra-cell) and external. The handover causes are also provided.
Counter - 6
Evolium
C220
Counter Name : NB_INC_EXT_TCH_HO_REQ SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of incoming external TCH (in HR or FR usage) handover requests. Trigger condition: Whenever 48.008HANDOVER REQUEST received by the target BSC for the target cell on TCH. Note: This counter counts both inter-PLMN and intra-PLMN handover events. External comment:
--
Edition: 13 Released
Page 76
C221
Counter Name : NB_INC_EXT_TCH_HO_ATPT SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of incoming external TCH (in HR or FR usage) handover attempts. Trigger condition: Whenever 48.008HANDOVER REQUEST ACK is sent by the target BSC containing the 44.018HANDOVER COMMAND towards the target cell on TCH. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
C230
Counter Name : NB_INC_INT_TCH_HO_REQ SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of incoming internal inter cell TCH (in HR or FR usage) handover requests. Trigger condition: Whenever the BSC process responsible for the handover procedure selects a target cell (among a list of target cells) for internal inter cell TCH handover. External comment:
--
Edition: 13 Released
Page 77
C231
Counter Name : NB_INC_INT_TCH_HO_ATPT SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of incoming internal inter cell TCH (in HR or FR usage) handover attempts. Trigger condition: 44.018HANDOVER COMMAND is sent to the serving BTS for internal inter cell TCH handover. However, the counter is incremented in the TARGET cell, based on the target cell ID indicated by the HO Command message, External comment:
--
C270
Counter Name : NB_INTRA_TCH_HO_REQ SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of intra cell TCH (in HR or FR usage) handover requests Trigger condition: Whenever the BSC process responsible for the handover procedure starts an intra cell TCH handover procedure. External comment:
--
Edition: 13 Released
Page 78
C271
Counter Name : NB_INTRA_TCH_HO_ATPT SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of intra cell TCH (in HR or FR usage) handover attempts.nts, Trigger condition: 44.018 ASSIGNMENT COMMAND is sent to the BTS for intra cell handover on TCH. External comment:
--
C411
Counter Name : NB_OUT_INT_TCH_HO_IDR_IN_ZONE_REQ SFD reference : 3BK 10204 0363 DSZZA ("Improvements in Radio Channel Selection") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of outgoing internal inter-cell TCH (in HR or FR usage) handover requests, plus the number of internal directed retries requests, towards the inner zone of a target concentric cell. Trigger condition: Whenever the BSC process responsible for the handover procedure at the serving cell generates an HO alarm towards the inner zone of a target concentric cell for internal inter-cell TCH handover, or for an internal directed retry. External comment:
--
Edition: 13 Released
Page 79
C412
Counter Name : NB_OUT_INT_TCH_HO_IDR_IN_ZONE_EXEC_FAIL SFD reference : 3BK 10204 0363 DSZZA ("Improvements in Radio Channel Selection") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of outgoing internal inter-cell TCH (in HR or FR usage) handover -executions failures, plus the number of internal directed retries -execution failures due to MS access problem, towards the inner zone of a target concentric cell. This counter permits to tune the EN_BETTER_ZONE_HO parameter. Trigger condition: 1) Receipts of 44.018HANDOVER FAILURE (cause=radio interface failure, reversion to old channel). 2) Timer T3103 expiry (this timer starts upon the sending of 44.018HANDOVER COMMAND and is stopped upon the receipt of 44.018HANDOVER COMPLETE). External comment:
--
Edition: 13 Released
Page 80
C413
Counter Name : NB_TCH_NOR_ASS_INNER_ZONE_ALLOC SFD reference : 3BK 10204 0363 DSZZA ("Improvements in Radio Channel Selection") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Traffic Load Counter definition: Number of TCH (in HR or FR usage) normal assignment -whose ressource is allocated in the BSC, in the inner zone of a concentric cell. Trigger condition: Whenever 48.058CHANNEL ACTIVATION is about to be send on Abis to activate a TCH channel in the inner zone of the concentric cell for any normal assignment. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3:
Edition: 13 Released
Page 81
C41b
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of incoming external TCH (in HR or FR usage) handover -preparation failures due to A-traffic-channel status mismatch between the BSC and the MSC. Trigger condition: 1) Whenever a 48.008 HANDOVER FAILURE message with a cause value of "requested terrestrial resource unavailable" is sent on A interface from the target BSC to the MSC. 2) Whenever a 48.008 HANDOVER FAILURE message with a cause value of "terrestrial circuit already allocated" is sent on A interface from the target BSC to the MSC. 3) Whenever a 48.008 HANDOVER FAILURE message with a cause value of "BSS not equipped" is sent on A interface from the target BSC to the MSC. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 82
C42
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of incoming external TCH (in HR or FR usage) handover successes. Trigger condition: Whenever a 44.018 HANDOVER COMPLETE message is received on Abis interface from the target cell for a TCH channel that is involved in an external TCH handover. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 83
C43
Counter Name : NB_INC_EXT_TCH_HO_EXEC_FAIL_MS_ACCESS SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of incoming external TCH (in HR or FR usage) handover -execution failures due to MS access problem. Trigger condition: 1) Whenever a 48.058 CONNECTION FAILURE INDICATION message with a cause value of "handover access failure" is received on Abis interface from the target cell for a TCH channel during an external TCH handover. 2) Whenever the timer supervising the handover procedure on the target cell (T9113), expires during an external TCH handover. 3) Whenever a 48.008 CLEAR COMMAND with a cause value of "radio interface failure - reversion to old channel" is received on A interface on the target BSC from the MSC during an external TCH handover. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 84
C440
Counter Name : NB_TCH_HO_ATPT_23_TrafHandover SFD reference : 3BK 10204 0326 DSZZA ("Traffic Management in HO Algorithms") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: MC440=C440, Number of inter-cell internal or external handover attempts, with the cause 23: "traffic handover" on a TCH channel (in HR or FR usage). Trigger condition: Whenever 44.018HANDOVER COMMAND is sent to the MS via the BTS because of cause 23. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 85
C444
Counter Name : NB_TCH_HO_ATPT_24_GenCaptureHandover SFD reference : 3BK 10204 0326 DSZZA ("Traffic Management in HO Algorithms") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of inter-cell internal or external handover attempts, with the cause 24: "general capture handover" on a TCH channel (in HR or FR usage). Trigger condition: Whenever 44.018HANDOVER COMMAND is sent to the MS via the BTS because of cause 24. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
C447
Counter Name : NB_TCH_HO_ATPT_26_BadQualHR SFD reference : 3BK 10204 0479 DTZZA ("Adaptive MultiRate Codec") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of intracell handover attempts, with the cause 26: "HR to FR channel adaptation due to bad radio quality" on a TCH channel. Trigger condition: Whenever 44.018 ASSIGNMENT COMMAND is sent to the MS via the BTS because of cause 26 on TCH. External comment:
--
Edition: 13 Released
Page 86
C448
Counter Name : NB_TCH_HO_ATPT_27_GoodQualFR SFD reference : 3BK 10204 0479 DTZZA ("Adaptive MultiRate Codec") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of intracell handover attempts, with the cause 27: "FR to HR channel adaptation due to good radio quality" on a TCH channel. Trigger condition: Whenever 44.018 ASSIGNMENT COMMAND is sent to the MS via the BTS because of cause 27 on TCH. External comment:
--
C449
Counter Name : NB_TCH_HO_ATPT_28_FastTraffic SFD reference : 3BK 10204 0475 DTZZA ("Instantaneous Peaks Management") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of handover attempts, with the cause 28 (Fast Traffic Handover). Trigger condition: Whenever 44.018HANDOVER COMMAND is sent to the MS via the BTS because of cause 28 on TCH. This counter is incremented in the serving cell. External comment:
--
Edition: 13 Released
Page 87
C450
Counter Name : NB_TCH_HO_ATPT_22_TooShortDistance SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of inter-cell internal or external handovers attempts, with cause 22: "too short MS-BTS distance" on a TCH channel (in HR or FR usage). Only the outer zones of extended cells are concerned by this Trigger condition: Whenever 44.018HANDOVER COMMAND is sent to the mobile via the BTS because of cause 22 on TCH. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 88
C45a
Counter Name : NB_OUT_EXT_TCH_REAL_HO_REQ SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing external TCH (in HR or FR usage) handover requests. Trigger condition: Whenever a 48.008 HANDOVER REQUIRED message with the "cell identification discriminator" set to a value identifying a GSM handover is sent on A interface to the MSC for a TCH handover towards a 2G cell. If more than one 48.008 HANDOVER REQUIRED is sent in the frame of the same Handover procedure, the counter is incremented only once. 48.008 HANDOVER REQUIRED is sent in following situations : 1) An external handover alarm has been raised, with corresponding list of candidate cells. 2) The list of candidate cells for the current alarm has been updated. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 89
C46
Counter Name : NB_OUT_EXT_TCH_HO_SUCC SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of outgoing external TCH (in HR or FR usage) handover successes. Trigger condition: Whenever a 48.008 CLEAR COMMAND message with a cause value of "handover successful" is received on A interface on the serving BSC from the MSC for a TCH handover. Note: This counter counts both inter-PLMN and intra-PLMN handover events. Note: This counter doesnt count hantover to UMTS
External comment:
--
Edition: 13 Released
Page 90
C460
Counter Name : NB_TCH_HO_ALLOC_EMERGENCY_PRES SFD reference : 3BK 10204 0362 DTZZA ("Preservation of on-going calls") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of high priority TCH requests served when the number of free TCH timeslots is less than or equal to NUM_TCH_EGNCY_HO. Trigger condition: The counter is incremented on the serving cell whenever the 48.058 CHANNEL ACTIVATION message allocating a TCH channel is sent and the following two conditions are both fulfilled: 1) the TCH is allocated to serve i) an internal handover Cause 2, 3, 4, 5, 6, 7, 10, 11, 12, 15, 16, 17, 18, 22, 27, or, ii) an external handover Cause "Uplink quality", "Uplink strength", "Downlink quality", "Downlink strength", "Distance", or iii) a normal assignment or an external handover with the preemption indicator set (i.e. Preemption Capability Indicator = 1 and EN_TCH_PREEMPT = Enable). 2) the number of free TCH timeslots is less than or equal to NUM_TCH_EGNCY_HO. Note 1: This counter counts both inter-PLMN and intra-PLMN handover events. External comment:
--
Edition: 13 Released
Page 91
C461
Counter Name : NB_TCH_HO_ATPT_29_TFO SFD reference : 3BK 10204 0478 DTZZA ("Tandem Free Operation") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of intra-cell handover - attempts, with the cause 29 (TFO mismatch resolution, TFO optimisation). Trigger condition: Whenever 44.018 ASSIGNMENT COMMAND is sent to the MS via the BTS because of cause 29 on TCH. External comment:
--
C47
Counter Name : NB_OUT_EXT_TCH_HO_EXEC_FAIL_REV SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of outgoing external TCH (in HR or FR usage) handover -execution failures due to MS access problem with reversion of the mobile to the old channel. Trigger condition: Whenever a 44.018 HANDOVER FAILURE message is received on Abis interface from the serving cell , during an external TCH handover. Note: This counter counts both inter-PLMN and intra-PLMN handover events. Note: This counter doesnt count hantover to UMTS
External comment:
--
Edition: 13 Released
Page 92
C470
Counter Name : NB_TCH_HO_ATPT_2_TooLowQualUp SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of inter-cell internal or external handover attempts, with cause 2: "uplink quality too low" on a TCH channel (in HR or FR usage). Trigger condition: Whenever 44.018HANDOVER COMMAND is sent to the MS via the BTS because of cause 2. This counter is incremented in the serving cell, External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 93
C471
Counter Name : NB_TCH_HO_ATPT_3_TooLowLevUp SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of inter-cell internal or external handovers attempts, with cause 3: "uplink level too low" on a TCH channel (in HR or FR usage). Trigger condition: Whenever 44.018HANDOVER COMMAND is sent to the MS via the BTS because of cause 3. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 94
C472
Counter Name : NB_TCH_HO_ATPT_4_TooLowQualDown SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of inter-cell internal or external handover attempts, with cause 4: "downlink quality too low" on a TCH channel (in HR or FR usage). Trigger condition: Whenever 44.018 HANDOVER COMMAND is sent to the MS via the BTS because of cause 4. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 95
C473
Counter Name : NB_TCH_HO_ATPT_5_TooLowLevDown SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of inter-cell internal or external handover attempts, with cause 5: "downlink level too low" on a TCH channel (in HR or FR usage). Trigger condition: Whenever 44.018HANDOVER COMMAND is sent to the MS via the BTS because of cause 5. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 96
C474
Counter Name : NB_TCH_HO_ATPT_6_TooLongDistance SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of inter-cell internal or external handover attempts, with cause 6: "MS-BTS distance too long" on a TCH channel (in HR or FR usage). Trigger condition: Whenever 44.018 HANDOVER COMMAND is sent to the MS via the BTS because of cause 6. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
C476
Counter Name : NB_TCH_HO_ATPT_15_TooHighLevInterfUp SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of intra-cell handover attempts, with cause 15: "too high level interference on uplink" on a TCH channel (in HR or FR usage). Trigger condition: Whenever 44.018ASSIGNMENT COMMAND is sent to the MS via the BTS because of cause 15. External comment:
--
Edition: 13 Released
Page 97
C477
Counter Name : NB_TCH_HO_ATPT_16_TooHighLevInterfDown SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of intra-cell handover attempts, with cause 16: "too high level interference on downlink" on a TCH channel (in HR or FR usage). Trigger condition: Whenever 44.018ASSIGNMENT COMMAND is sent to the MS via the BTS because of cause 16. External comment:
--
C478
Counter Name : NB_TCH_HO_ATPT_12_TooLowPowBudg SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of inter-cell internal or external handover attempts, with cause 12: "too low power budget" on a TCH channel (in FR or FR usage). Trigger condition: Whenever 44.018 HANDOVER COMMAND is sent to the MS via the BTS because of cause 12. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 98
C479
Counter Name : NB_TCH_HO_ATPT_21_HighLevNeigCellPrefBand SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of inter-cell internal or external handover attempts, with cause 21: "high level in neighbour cell in the preferred band" on a TCH channel (in HR or FR usage). This counter is related to multiband. Trigger condition: Whenever 44.018 HANDOVER COMMAND is sent to the MS via the BTS because of cause 21 on TCH. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 99
C48
Counter Name : NB_OUT_EXT_TCH_HO_EXEC_FAIL_NO_REV SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of outgoing external TCH (in HR or FR usage) handover execution failures due to MS access problem without reversion of the mobile to the old channel (call drop). Trigger condition: Whenever the timer supervising the handover procedure on the serving cell (T8), expires during an external TCH handover. Note: This counter counts both inter-PLMN and intra-PLMN handover events. Note: This counter doesnt count hantover to UMTS
External comment:
--
Edition: 13 Released
Page 100
C50
Counter Name : NB_OUT_EXT_TCH_HO_ATPT SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of outgoing external TCH (in HR or FR usage) handover attempts. Trigger condition: Whenever the 44.018 HANDOVER COMMAND message is sent on Abis interface on the serving channel, during an external TCH handover procedure. Note: This counter counts both inter-PLMN and intra-PLMN handover events. Note: This counter doesnt count hantover to UMTS
External comment:
--
C52
Counter Name : NB_INC_INT_TCH_HO_SUCC SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of incoming internal inter-cell TCH (in HR or FR usage) handover successes. Trigger condition: Whenever a 44.018 HANDOVER COMPLETE message is received on Abis interface from the target cell for a TCH channel that is involved in an internal inter-cell TCH handover. External comment:
--
Edition: 13 Released
Page 101
C53
Counter Name : NB_INC_INT_TCH_HO_EXEC_FAIL_MS_ACCESS SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of incoming internal inter-cell TCH (in HR or FR usage) handover -execution failures due to MS access problem; the mobile either reverts or does not to the old channel. Trigger condition: Whenever the timer supervising the handover procedure (T3103) expires during an internal inter-cell TCH handover. External comment:
--
C541
Counter Name : NB_INC_EXT_TCH_HO_PREP_FAIL_R_ABIS SFD reference : 3BK 10204 0518 DTZZA ("A bis and A ter dynamic allocation") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of incoming external TCH (in HR or FR usage) handover -preparation failures due to congestion (C541a), or A-traffic-channel status mismatch between the BSC and the MSC (C41b). Trigger condition: Note: This counter counts both inter-PLMN and intra-PLMN handover events. External comment:
--
Edition: 13 Released
Page 102
C541a
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of incoming external TCH (in HR or FR usage) handover -preparation failures due to congestion. Trigger condition: Whenever a 48.008 HANDOVER FAILURE message with a cause value of "no radio resource available" is sent on A interface from the target BSC to the MSC during an external TCH handover. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
C551
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of incoming internal inter-cell TCH (in HR or FR usage) handover -preparation failures due to congestion. Trigger condition: Whenever an internal inter-cell TCH handover cannot be performed, because the target cell is congested (no free TCH channel). External comment:
--
Edition: 13 Released
Page 103
C55a
Counter Name : NB_OUT_INT_TCH_HO_REQ SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of outgoing internal inter-cell TCH (in HR or FR usage) handover requests. Trigger condition: Whenever the BSC process responsible for the handover procedure selects a target cell (among a list of target cells) for internal inter cell TCH handover. External comment:
--
C56
Counter Name : NB_OUT_INT_TCH_HO_SUCC SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of outgoing internal inter-cell TCH (in HR or FR usage) handover successes. Trigger condition: Whenever a 44.018 HANDOVER COMPLETE message is received on Abis interface from the target cell , during an internal inter-cell TCH handover. External comment:
--
Edition: 13 Released
Page 104
C561
Counter Name : NB_INTRA_TCH_HO_PREP_FAIL_CONG_R_ABIS SFD reference : 3BK 10204 0518 DTZZA ("A bis and A ter dynamic allocation") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of intra-cell TCH (in HR or FR usage) handover -preparation failures due to congestion. Trigger condition: Whenever a internal intra-cell TCH handover cannot be performed, because there is no free TCH channel to serve the handover. External comment:
--
C57
Counter Name : NB_OUT_INT_TCH_HO_EXEC_FAIL_REV SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing internal inter-cell TCH (in HR or FR usage) handover -execution failures due to MS access problem with reversion of the mobile to the old channel. Trigger condition: Whenever a 44.018 HANDOVER FAILURE message is received on Abis interface from the serving cell, during an internal inter-cell TCH handover. External comment:
--
Edition: 13 Released
Page 105
C58
Counter Name : NB_OUT_INT_TCH_HO_EXEC_FAIL_NO_REV SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of outgoing internal inter-cell TCH (in HR or FR usage) handover -execution failures due to MS access problem without reversion of the mobile to the old channel (call drop). Trigger condition: Whenever the timer supervising the handover procedure (T3103) expires during an internal inter-cell TCH handover. External comment:
--
Edition: 13 Released
Page 106
C585a
Counter Name : NB_TCH_HO_ATPT_7_ConsBadSACCHmicroCell SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of inter-cell internal or external handover attempts, with cause 7: "several consecutive bad SACCH frames received in a micro cell" on a TCH channel (in HR or FR usage). This counter is related to micro cell environment. Trigger condition: Whenever 44.018HANDOVER COMMAND is sent to the MS via the BTS because of cause 7. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 107
C585d
Counter Name : NB_TCH_HO_ATPT_17_TooLowLevUpMicroCell SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of inter-cell internal or external handovers attempts, with cause 17: "too low level on the uplink in a microcell compared to a high threshold" on a TCH channel (in HR or FR usage). This counter is related to micro cell environment. Trigger condition: Whenever 44.018 HANDOVER COMMAND is sent to the MS via the BTS because of cause 17. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 108
C585e
Counter Name : NB_TCH_HO_ATPT_18_TooLowLevDownMicroCell SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of inter-cell internal or external handovers attempts, with cause 18: "too low level on the downlink in a microcell compared to a high threshold" on a TCH channel (in HR or FR usage). This counter is related to micro cell environment. Trigger condition: Whenever 44.018HANDOVER COMMAND is sent to the MS via the BTS because of cause 18. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 109
C585f
Counter Name : NB_TCH_HO_ATPT_14_HighLevNeigLowCellSlowM SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of inter-cell internal or external handover attempts, with cause 14: "high level in neighbour lower layer for slow mobile" on a TCH channel (in HR or FR usage). This counter is related to micro cell Trigger condition: Whenever 44.018HANDOVER COMMAND is sent to the MS via the BTS because of cause 14. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
C586a
Counter Name : NB_TCH_HO_ATPT_10_TooLowLevUpInZone SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of intra-cell handover attempts, with cause 10 "Inner zone uplink level too low" on TCH channel (in HR or FR usage). This counter is related to concentric cell environment. Trigger condition: Whenever 44.018ASSIGNMENT COMMAND is sent to the MS via the BTS because of cause 10. External comment:
--
Edition: 13 Released
Page 110
C586b
Counter Name : NB_TCH_HO_ATPT_11_TooLowLevDownInZone SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of intra-cell handover attempts, with cause 11: "Inner zone downlink level too low" on TCH channel (in HR or FR usage). This counter is related to concentric cell environment. Trigger condition: Whenever 44.018ASSIGNMENT COMMAND is sent to the MS via the BTS because of cause 11. External comment:
--
C586c
Counter Name : NB_TCH_HO_ATPT_13_TooHighLevUpDownOutZo SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of intra-cell handover attempts, with cause 13: "Outer zone uplink and downlink levels too high" on TCH channel (in HR or FR usage). This counter is related to concentric cell environment. Trigger condition: Whenever 44.018ASSIGNMENT COMMAND is sent to the MS via the BTS because of cause 13. External comment:
--
Edition: 13 Released
Page 111
C60
Counter Name : NB_OUT_INT_TCH_HO_ATPT SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of outgoing internal inter-cell TCH (in HR or FR usage) handover attempts. Trigger condition: Whenever the 44.018 HANDOVER COMMAND message is sent on Abis interface on the serving channel, during an internal inter-cell TCH handover procedure. External comment:
--
C62
Counter Name : NB_INTRA_TCH_HO_SUCC SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of intra-cell TCH (in HR or FR usage) handover successes. Trigger condition: Whenever a 44.018 ASSIGNMENT COMPLETE message is received on Abis interface on the target channel for a TCH channel that is involved in an internal intra-cell TCH handover. External comment:
--
Edition: 13 Released
Page 112
C63
Counter Name : NB_INTRA_TCH_HO_EXEC_FAIL_NO_REV SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of intra-cell TCH (in HR or FR usage) handover execution failures due MS access problem; the mobile is lost. Trigger condition: Whenever the timer supervising the handover procedure (T3107) expires during an internal intra-cell. External comment:
--
C67
Counter Name : NB_INTRA_TCH_HO_EXEC_FAIL_REV SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of intra-cell TCH (in HR or FR usage) handover -execution failures due to MS access problem with reversion of the mobile to the old channel. Trigger condition: Whenever a 44.018 ASSIGNMENT FAILURE message is received on Abis interface on the serving channel, during an internal intra-cell TCH handover. External comment:
--
Edition: 13 Released
Page 113
C75
Counter Name : NB_TCH_HO_MSC_TRIG SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of external handovers triggered by the MSC but not required by the BSS. Trigger condition: Whenever a 48.008 HANDOVER COMMAND message is received on A interface from the MSC and timer T_HO_REQ_LOST is not running. Note: This counter counts both inter-PLMN and intra-PLMN handover events. Note: This counter doesnt count hantover to UMTS
External comment:
--
Edition: 13 Released
Page 114
Type number: Type name: Type scope (per BSS): Candidate for Standard BSC Yes
LapD measurements
Counter - 7
Evolium
Type limitations (per BSS): - In Standard usage: none - In Detailed usage : none
L1.1
Counter Name : NB_LAPD_INFO_FRAME_SENT SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object LapD LapD Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of Information frames transmitted on the LapD link, excluding the re-transmissions. Trigger condition: Whenever an Information Frame is transmitted on a logical LAPD link, which is not a retransmission of a previous Information Frame. External comment:
--
Edition: 13 Released
Page 115
L1.12
Counter Name : NB_LAPD_CRC_ERROR SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object LapD LapD Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of frames received with CRC error on the LapD link. Trigger condition: Whenever the HDLC Formatter handling the Physical LAPD link detects a CRC error in a received Frame. External comment:
--
L1.15
Counter Name : NB_LAPD_INFO_FRAME_RESENT SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object LapD LapD Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of Information frames re-transmitted on the LapD link. Trigger condition: Whenever an Information Frame is retransmitted on a logical LAPD link. External comment:
--
Edition: 13 Released
Page 116
L1.16
Counter Name : TIME_LAPD_UNAVAIL SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object LapD LapD Package 0 1
Measured unit:
Technology
GSM
External comment:
--
Domain: Resource Availability & Usage Counter definition: Time (in seconds) during which the LapD link is unavailable for any cause. Trigger condition: 1) This counter will be incremented with the number of seconds elapsed between LAPD layer entities initiation (first DL_ESTABLISH_ REQUEST primitive sent by Layer 3 to Layer 2 for that logical LAPD link) and reception of the DL-ESTABLISH-CONFIRM primitive for that logical LAPD link. 2) This counter will also be incremented with the number of seconds elapsed between reception of the DL-RELEASE-INDICATION primitive and reception of the DL_ESTABLISH-CONFIRM primitive for that logical LAPD link.
Edition: 13 Released
Page 117
L1.17
Counter Name : NB_LAPD_EST SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object LapD LapD Package 0 1
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: Number of data link establishment, re-establishment and reset on the LapD link. Trigger condition: 1) Whenever the layer 2 receives a SABME frame in state MF Established or Timer recovery (data link reset initiated by the BTS). 2) Whenever the layer 2 receives an UA frame in the state awaiting establishment (i.e. data link establishment, re-establishment or link reset initiated by the BSC).
L1.18
Counter Name : TIME_LAPD_CONG SFD reference : 3BK 10204 0541 DTZZA ("B8 BSC Counter and Indicator Improvements") Data collection Cumulative
Release B8 B9 Measured object LapD LapD Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: Time in seconds during which the LapD link is congested in transmission in the BSC. Trigger condition: This counter will be incremented with the number of seconds elapsed between the reception of L2_CONGESTION_IND and the reception of L2_END_CONGESTION_IND by the Layer 3 in the BSC External comment:
--
Edition: 13 Released
Page 118
L1.2
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of Information frames received on the LapD link, excluding the re-transmissions. Trigger condition: Whenever an Information Frame is received on a logical LAPD link. External comment:
--
L1.5
Counter Name : NB_LAPD_RNR_SENT SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object LapD LapD Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of Receive Not Ready (RNR) frames transmitted on the LapD link. Trigger condition: Whenever an RNR Frame is transmitted on a logical LAPD link. External comment:
--
Edition: 13 Released
Page 119
L1.6
Counter Name : NB_LAPD_RNR_REC SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object LapD LapD Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of Receive Not Ready (RNR) frames received on the LapD link. Trigger condition: Whenever an RNR Frame is received on a logical LAPD link. External comment:
--
Edition: 13 Released
Page 120
Type number: Type name: Type scope (per BSS): Candidate for Standard BSC Yes
X25 measurements
Counter - 8
Evolium
Type limitations (per BSS): - In Standard usage: none - In Detailed usage : none
X3.20
Counter Name : NB_X25_INC_CALL_SUCC_CLOSED SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object X25 X25 Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of incoming X.25 calls that are successfully closed by the BSC. Trigger condition: Whenever an incoming X.25 CALL is successfully closed. External comment:
--
Edition: 13 Released
Page 121
X3.21
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of outgoing X.25 calls that are successfully closed by the BSC. Trigger condition: Whenever an outgoing X.25 CALL is successfully closed. External comment:
--
X3.22
Counter Name : NB_X25_INC_CALL_ABNORM_CLOSED SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object X25 X25 Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of incoming X.25 calls that are closed in an abnormal way, as seen by the BSC. Trigger condition: Whenever an incoming X.25 CALL is closed in an abnormal way. External comment:
--
Edition: 13 Released
Page 122
X3.23
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of outgoing X.25 calls that are closed in an abnormal way, as seen by the BSC. Trigger condition: Whenever an outgoing X.25 CALL is closed in an abnormal way. External comment:
--
Edition: 13 Released
Page 123
Type number: Type name: Type scope (per BSS): Candidate for Standard BSC Yes
N7 measurements
Counter - 9
Evolium
Type limitations (per BSS): - In Standard usage: none - In Detailed usage : none
Type definition: Set of counters related to the N7 Signalling Links. Note that in the BSS context, the Link Set and the Route Set are identical.
N1.1
Counter Name : TIME_N7_ALIGNED SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Type 9 : N7 measurements
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Time (in seconds) during which the N7 SL is correctly aligned. Trigger condition: Whenever the No.7 Signalling channel between the MSC and BSS is correctly aligned, this counter will be incremented every second. External comment:
--
Edition: 13 Released
Page 124
N1.10
Counter Name : NB_N7_CHANGEOVER SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of changeovers from the primary (observed) N7 SL to another secondary one. Trigger condition: Whenever a changeover is made from using the primary signalling link to the secondary signalling link. External comment:
--
N1.11
Counter Name : NB_N7_CHANGEBACK SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Type 9 : N7 measurements
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of changebacks from the secondary (observed) N7 SL to the primary one. Trigger condition: Whenever a change back is made from using the secondary signalling link to the primary signalling link. External comment:
--
Edition: 13 Released
Page 125
N1.12
Counter Name : NB_N7_RESTORATION SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of N7 SL restorations (i.e. correctly aligned after a failure). Trigger condition: Whenever the No.7 Signalling channel between the MSC and BSS is correctly aligned after the removal of a failure condition, this counter will be incremented. External comment:
--
Edition: 13 Released
Page 126
N1.2
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: Number of N7 SL failures (any reason). Trigger condition: 1) Whenever a No.7 Signalling Link failure is detected due to an abnormal Forward Indicator Bit (FIB) being received by the BSS. 2) Whenever a No.7 Signalling Link failure is detected due to an abnormal Backward Sequence Number (BSN) being received by the BSS. 3) Whenever the timer supervising the reception of an acknowledgement message (T7) expires. 4) Whenever a No.7 Signalling Link failure is detected due to an excessive signal unit error rate being detected. 5) Whenever a No.7 Signalling Link failure is detected due to an excessive duration of Signalling Link
Edition: 13 Released
Page 127
N1.3
Counter Name : NB_N7_LINK_FAIL_FIB_BSN SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: Number of Forward Indicator Bits (FIB) and Backward Sequence Number (BSN) on the N7 SL. Trigger condition: 1) Whenever any two Forward Indicator Bit values in 3 concecutive recieved MSUs or fill-in SUs indicate the start of a retransmission when no NACK has been sent. 2) Whenever two Backward Sequence Number values in 3 concecutive received MSUs or fill-in SUs are not the same as the previous one or any of the Forward Sequence Number values of SUs in
N1.4
Counter Name : NB_N7_LINK_FAIL_T7_EXP SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Type 9 : N7 measurements
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of N7 SL failures due to non acknowledgment in time. Trigger condition: Whenever the timer supervising the reception of an acknowledgement message (T7) expires. External comment:
--
Edition: 13 Released
Page 128
N1.5
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of N7 SL failures due to exessive signal unit error rate. Trigger condition: Whenever a No.7 Signalling Link failure is detected due to an excessive Signal Unit error rate. External comment:
--
N1.6
Counter Name : NB_N7_LINK_FAIL_CONG SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Type 9 : N7 measurements
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of N7 SL failures due to congestion during an extended period of time. Trigger condition: Whenever a No.7 Signalling Link failure is detected due to an excessive duration of Signalling Link External comment:
--
Edition: 13 Released
Page 129
N1.7
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of N7 SL failures due to expiry of timer supervising the alignment. Trigger condition: Whenever the timer supervising the alignment of the Signalling Link (T2) expires. External comment:
--
N1.8
Counter Name : NB_N7_SU_REC_WITH_ERROR SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Type 9 : N7 measurements
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of Signalling Units received with errors on the N7 SL. Trigger condition: Whenever a Signalling Unit is received which is found to be in error. External comment:
--
Edition: 13 Released
Page 130
N1.9
Counter Name : NB_N7_NEG_ACK_REC SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of Negative Acknowledgment receieved on the N7 SL. Trigger condition: Whenever a Negative Acknowledgement (NACK) is received. External comment:
--
N2.7
Counter Name : TIME_N7_UNAVAIL_ERROR_SL SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Type 9 : N7 measurements
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Time (in seconds) during which the N7 SL is not correctly aligned due to a fault on the N7 SL. Trigger condition: Whenever the No.7 Signalling channel between the MSC and BSS fails, until the time when the fault has been removed and the link aligned, this counter will be incremented every second. External comment:
--
Edition: 13 Released
Page 131
N2.9
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Time (in seconds) during which the N7 SL is not available due to a remote MSC processor outage. Trigger condition: Whenever the MSC indicates to the BSS that it is unable to process signalling traffic due to an outage, this counter will be incremented every second. External comment:
--
N3.1
Counter Name : NB_N7_SIF_SIO_SENT SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Type 9 : N7 measurements
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of octets of Signalling Information (SIF) and Service Information Octets (SIO) transmitted on the N7 SL. Trigger condition: When sending an MSU, this counter is incremented by the length of the SIF, plus one for the SIO octet. External comment:
--
Edition: 13 Released
Page 132
N3.10
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number Message Signalling Units (MSU) discarded due to a message buffer overflow caused by an extended period of Signalling Link congestion. Trigger condition: Whenever an Message Signalling Unit (MSU) is discarded due to Signalling Link congestion. External comment:
--
N3.11
Counter Name : NB_N7_CONG_WITH_MSU_LOST SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Type 9 : N7 measurements
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of times one (or more) Message Signalling Units (MSU) are lost due to congestion on the N7 SL. Trigger condition: Whenever 1 or more MSU's are lost due to congestion on the signalling link. External comment:
--
Edition: 13 Released
Page 133
N3.2
Counter Name : NB_N7_OCTETS_RESENT SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of octets re-transmitted on the N7 SL. Trigger condition: Whenever an octet has to be re-transmitted. External comment:
--
N3.3
Counter Name : NB_N7_MSU_SENT SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Type 9 : N7 measurements
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of Message Signalling Units (MSU) transmitted on the N7 SL. Trigger condition: Whenever a Message Signalling Unit (MSU) is transmitted. External comment:
--
Edition: 13 Released
Page 134
N3.4
Counter Name : NB_N7_SIF_SIO_REC SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of octets of Signalling Information Field (SIF) and Service Information Octets (SIO) received on the N7 SL. Trigger condition: 1) Whenever an octet of the Signalling Information Field (SIF) is received. 2) Whenever a Service Information Octet is received. External comment:
--
N3.5
Counter Name : NB_N7_MSU_REC SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Type 9 : N7 measurements
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of Message Signalling Units (MSU) received on the N7 SL. Trigger condition: Whenever a Message Signalling Unit (MSU) is received. External comment:
--
Edition: 13 Released
Page 135
N3.7
Counter Name : TIME_N7_UNAVAIL_CONG SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Time (in seconds) during which the N7 SL is not available due to congestion. Trigger condition: Whenever the signalling link is congested, this counter will be incremented every second. External comment:
--
N4.2
Counter Name : TIME_N7_UNAVAIL_LINK_SET SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Link Set N7 Link Set Package 0 1
Type 9 : N7 measurements
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Time (in seconds) during which the Link Set towards the MSC is not available on the N7. Trigger condition: Whenever the Link Set towards the MSC is unavailable, this counter will be updated every second. External comment:
--
Edition: 13 Released
Page 136
Type number: Type name: Type scope (per BSS): Candidate for Standard
Type limitations (per BSS): The maximum number of cells observed for this measurement type is 15 cells. Type definition: This measurement type provides observations on SDCCH channel. An observation is composed of a set of records, each record being related to a single channel seizure within the observed cell. A record is a consistent structure of data made up of several fields (called DER) providing information about the radio configuration and about specific events that are cumulated. Not all channel seizures are observed in the cell, but one per sample_rate value. For an observed SDCCH channel, the recording of data starts in the BSC as soon as 08.58CHANNEL ACTIVATION is sent on Abis.
SDCCH observations
Observation - 10
Evolium
S01
Observation Name CHANNEL_ID (SCCH)
Length 5
Observation The SDCCH sub-channel identity to which the observation relates, including BTS number, sector number, TRX number, TRX timeslot and sub-channel. Note : the sub-channel field may take a value contained between 0 and 7. External comment:
--
number
S02
Observation Name CHAN_SEIZ_TIME
Length 16
Observation The Absolute Date and Time at which the SDCCH Sub-channel was activated (i.e. when the 48.058 CHANNEL ACTIVATION message was sent to the CELL). The time is accurate to tenths of seconds. External comment:
--
Date/Time
Edition: 13 Released
Page 137
Evolium
S03
Observation Name CHAN_RELEASE_TIME
Length 16
Observation The Absolute Date and Time at which the SDCCH Sub-channel was released (i.e. when the 48.058 RF CHANNEL RELEASE ACKNOWLEDGE message was received from the CELL or when the T_RCR_ACK timer expires for the second time). The time is accurate to tenths of seconds. External comment:
--
Date/Time
S04
Observation Name END_INDICATION (SDCCH)
Length 1
Observation Describes how the SDCCH sub-channel was released. Viz.: 0/ successful release of SDCCH sub-channel, initiated either by the MS, the NSS or the BSS in case of handover 1: LAPD failure 2: other BSS problems - unsuccessful channel activation - transcoder failure on the old channel in case of SDCCH normal assignment (TCH -> SDCCH) - hardware failure (BSC or BTS or transmission equipment) - software failure (BSC or BTS or transmission equipment) 3: radio failures during the channel established phase: radio link failures or LAPDm failures - 48.058 CONNECTION FAILURE INDICATION message received with a cause value of "radio link failure" - 48.058 ERROR INDICATION message received 4: MS access problems during the channel establishment phase or a channel change procedure - T3101 expiry during immediate assignment - 44.018 ASSIGNMENT FAILURE received during SDCCH normal assignment or internal intra-cell SDCCH handover - T3107 expiry during normal assignment (SDCCH or TCH) or internal intra-cell SDCCH handover - T3103 expiry during internal inter-cell SDCCH handover or internal directed retry - 44.018 HANDOVER FAILURE message received during internal inter-cell SDCCH handover - 48.058 CONNECTION FAILURE INDICATION message received with a cause value of "handover access failure" during internal inter-cell SDCCH handover or external SDCCH handover - T9113 or T8 expiry during external SDCCH handover -48.008 CLEAR COMMAND message received with a cause value of "radio interface failure - reversion to old channel" during external SDCCH handover. External comment:
--
number
Edition: 13 Released
Page 138
Evolium
S05
Observation Name SEIZURE_TYPE (SDCCH)
Length 1
Observation Describes the purpose for which the SDCCH sub-channel was seized. Viz : 0: Mobile Originating Call (MO) excluding procedures corresponding to values 2, 5, 6, 7, 8, 9 & 10 1: Mobile Terminating transaction (MT) 2: MO : call re-establishment 3: the sub-channel was allocated but was never seized by the mobile 4: the sub-channel was a target of an SDCCH handover or a TCH to SDCCH assignment 5: MO : Location Updating Request 6: MO : Location Updating Request - Follow on 7: MO : Short Message Service 8 : MO : Supplementary Service 9 : MO : IMSI detach indication 10: MO : Emergency Call
number
The table below summerises information about the seizure and release of the observed SDCCH channel. S05 provides in formation on channel seizure. S04 provides information on channel release. --------------------------------------------------------------------------------------------------------------------------------------S05/ | 3: | 0,1,2,5,6,7,8,9,10: | 4: | | chan not seized by the MS | chan seized by the MS as part | chan seized by the MS as part | | as part of any SDCCH | of immediate assignment | of SDCCH handover or | S04 | transaction | | SDCCH normal assignment | --------------------------------------------------------------------------------------------------------------------------------------0: normal rel | applicable for NSS release | applicable for MS, NSS, and BSS | applicable for MS, NSS and BSS | req by MS, | only | release | release | NSS, or BSS | | | | ---------------------------------------------------------------------------------------------------------------------------------------1,2 : abnormal | applicable | applicable | applicable | rel. due to BSS | | | | problem | | | | ---------------------------------------------------------------------------------------------------------------------------------------3 : abnormal | not applicable | applicable | applicable | rel due to radio | | | | link failure | | | | ----------------------------------------------------------------------------------------------------------------------------------------4 : abnormal | applicable for : | applicable for : | applicable for : | release due to | - immediate assignment | - TCH normal assignment | - SDCCH handover (old channel) | MS access pb | - SDCCH normal assignt | - internal directed retry | | | - SDCCH handover (new | - SDCCH handover (old channel) | | | channel) | | | -------------------------------------------------------------------------------------------------------------------------------------Notes :
Edition: 13 Released
Page 139
Evolium
: definition:
1) S04=4 and S05=3 means : - S05=3 : observed SDCCH channel not seized by the mobile - S04=4 : MS access problems on observed SDCCH channel Observed SDCCH channel released before having been seized by the mobile (SDCCH is the target channel for immediate assignment, SDCCH normal assignment or SDCCH handover) 2) S04=4 and S05=0,1,2,5,6,7,8,9 or 10 means : - S05 = 0,1,2,5,6,7,8,9 or 10 : observed SDCCH channel seizure by the mobile as the result of an immediate assignment (specific usage is given by the value of S05) - S04 = 4 : MS problem on accessing a new channel Observed SDCCH channel first seized by the mobile as the result of an immediate assignment and then released during a channel change procedure (TCH normal assignment, internal directed retry, SDCCH handover) 3) S04=4 and S05=4 means : - S05=4 : observed SDCCH channel seized by the mobile as the result of an SDCCH normal assignment or of External comment: an SDCCH handover - S04=4 : MS problem on accessing a new channel -Observed SDCCH channel first seized by the mobile as the result of an SDCCH nomal assignment or of an
S06
Observation Name MS_POWER
Length 2
Observation Indicates the last commanded MS Power Level on the SACCH Channel to the Mobile. External comment:
--
dB
This counter corresponds to the MS_POWER field of the 48.058 PHYSICAL CONTEXT CONFIRM message.
Edition: 13 Released
Page 140
Evolium
S07
Observation Name BS_POWER Observation Indicates the last commanded BS Power Level to the encoder. External comment:
--
Length 2
dB
This counter corresponds to the BS_POWER field of the 48.058 PHYSICAL CONTEXT CONFIRM message.
S08
Observation Name TIMING_ADVANCE
Length 2
Observation Indicates the last commanded Timing Advance on the SACCH Channel to the Mobile.
bper
This counter corresponds to the TIMING_ADVANCE field of the 48.058 PHYSICAL CONTEXT CONFIRM message. External comment:
--
S09
Observation Name NB_FRAMES_NOT_REPEATED Observation Indicates the number of SAPI 0 frames that were not repeated. External comment:
--
Length 2
number
This counter corresponds to the CNT_I_TX field of the 48.058 PHYSICAL CONTEXT CONFIRM message.
Edition: 13 Released
Page 141
Evolium
S16
Observation Name NB_FRAMES_REPEATED Observation Indicates the number of SAPI 0 frames that were repeated at least once. External comment:
--
Length 2
number
This counter corresponds to the CNT_I_RETX field of the 48.058 PHYSICAL CONTEXT CONFIRM message.
S17
Observation Name NB_SABM_AFTER_UA_SENT
Length 1
Observation Indicates the number of SABM received on SAPI 0 when UA has already been sent (i.e. SABM received in established or timer recovery state). This counter corresponds to the CNT_SABM_RX field of the 48.058 PHYSICAL CONTEXT CONFIRM External comment:
--
number
S18
Observation Name NB_PHYSICAL_INFO_SENT
Length 1
Observation Indicates the number of times 44.018 PHYSICAL INFORMATION message has been sent in case of asynchronous handover.
number
This counter corresponds to the CNT_PHY_INFO_TX field of the 48.058 PHYSICAL CONTEXT CONFIRM message. External comment:
--
Edition: 13 Released
Page 142
Evolium
S19
Observation Name NB_ERRONEOUS_FRAMES_SENT Observation Indicates the number of erroneous frames that were received. External comment:
--
Length 1
number
This counter corresponds to the CNT_ERR_RX field of the 48.058 PHYSICAL CONTEXT CONFIRM
S20
Observation Name NB_REJ_FRAMES_SENT Observation Indicates the number of Reject (REJ) frames that were transmitted. External comment:
--
Length 1
number
This counter corresponds to the CNT_REJ_TX field of the 48.058 PHYSICAL CONTEXT CONFIRM message.
S21
Observation Name NB_REJ_FRAMES_RECEIVED Observation Indicates the number of Reject (REJ) frames that were received. External comment:
--
Length 1
number
This counter corresponds to the CNT_REJ_RX field of the 48.058 PHYSICAL CONTEXT CONFIRM message.
Edition: 13 Released
Page 143
Evolium
S22
Observation Name NB_MS_TX_PWR_MAX_SENT
Length 1
Observation This counter indicates the number of 48.058 CONNECTION FAILURE INDICATION messages that were sent to the BSS with a cause value of "set YY_TXPWR_M". This counter corresponds to the CNT_MS_TXPWR_MAX field of the 48.058 PHYSICAL CONTEXT CONFIRM message. External comment:
--
number
S23
Observation Name RADIO_LINK_FAILURE_INDICATION Observation Indicates whether or not a Radio Link Failure was detected or not.
Length 1
number
0: No connection failure occurred on the SDCCH Sub-channel 1: A 48.058 CONNECTION FAILURE INDICATION message was received with a cause value of "radio link failure". This counter corresponds to the RL_FAILURE_INDICATOR field of the 48.058 PHYSICAL CONTEXT CONFIRM message. External comment:
--
S24
Observation Name PERC_INCOR_SACCH_FRAMES_REC Observation Indicates the percentage of SACCH frames that could not be decoded.
Length 1
This counter corresponds to the CNT_SA_BFI_RX/CNT_SA_RX field of the 48.058 PHYSICAL CONTEXT CONFIRM message. External comment:
--
Edition: 13 Released
Page 144
Evolium
S25
Observation Name PERC_INCOR_SDCCH_FRAMES_REC Observation Indicates the percentage of SDCCH frames that could not be decoded.
Length 1
This counter corresponds to the CNT_SD_BFI_RX/CNT_SD_RX field of the 48.058 PHYSICAL CONTEXT CONFIRM message. External comment:
--
S26
Observation Name SAMPLE_RATE Observation Indicates the sample rate value at the time the observation is collected. External comment:
--
Length 1
number
Edition: 13 Released
Page 145
Type number: Type name: Type scope (per BSS): Candidate for Standard One cell No
Observation - 11
Evolium
Type limitations (per BSS): The maximum number of cells observed for this measurement type is 1 cell. Type definition: This measurement type provides observations on the 48.058 MEASUREMENT REPORTS for a TCH (in HR or FR usage) channel. An observation is composed of a set of records, each record being related to a single channel seizure within the observed cell. A record is a consistent structure of data made up of several fields (called DER) providing information about the radio configuration and about specific events that are cumulated. Not all channel seizures are observed in the cell, but one per sample_rate value. The counters related to 2G neighbour cells can be repeated for up to 32 neighbour cells. The concerned counters are named eg "Rnn13" were "nn" belongs to the range 00 to 31. The counters related to 3G neighbour cells can be repeated for up to 8 neighbour cells. The concerned counters are named eg "Rn18" were "n" belongs to the range 0 to 8. For an observed channel, the recording of data starts in the BSC as soon as 48.058 MEASUREMENT REPORT is received on Abis by the BSC.
R01
Observation Name CHANNEL_ID (TCH)
Length 5
Observation The RTCH channel identity to which the Observation relates, including BTS Number, Sector Number, TRX Number, TRX Timeslot and Sub-channel which is only significant in case of an half rate TCH channel. Note : The sub-channel field may take a value contained between 0 and 1 in case of an half rate TCH channel. In case of a full rate TCH channel the sub-channel field which is not significant is set to zero. External comment:
--
number
Edition: 13 Released
Page 146
Evolium
R01a
Observation Name RTCH_TYPE Observation The RTCH channel type to which the Observation relates : 0: for a full rate RTCH channel 1: for an half rate RTCH channel. External comment:
--
Length 1
number
R03
Observation Name RECEIVED_TIMESTAMP
Length 16
Observation The Absolute Date and Time at which the measurement result message was received from the CELL by the BSS. The time is accurate to tenths of a second. External comment:
--
Date/Time
R04
Observation Name AV_RXLEV_UL_HO (11)
Length 1
Observation Indicates the average receive uplink level of the serving cell, as used by the handover algorithm. External comment:
--
dBm
Edition: 13 Released
Page 147
Evolium
R04a
Observation Name AV_RXLEV_UL_MCHO (11)
Length 1
Observation This observation data is only related to microcellular environment. It indicates the average receive uplink level of the serving cell, as used by the handover algorithm. External comment:
--
dBm
R05
Observation Name AV_RXLEV_DL_HO (11)
Length 1
Observation Indicates the average receive downlink level of the serving cell, as used by the handover algorithm. External comment:
--
dBm
R05a
Observation Name AV_RXLEV_DL_MCHO (11)
Length 1
Observation This observation data is only related to microcellular environment. It indicates the average receive downlink level of the serving cll, as used by the handover algorithm. External comment:
--
dBm
Edition: 13 Released
Page 148
Evolium
R06
Observation Name AV_RXLEV_PBGT_HO (11)
Length 1
Observation Indicates the average received Downlink Level of the serving cell, as used by the Power Budget algorithm. External comment:
--
dBm
R07
Observation Name AV_RXQUAL_UL_HO (11)
Length 1
Observation Indicates the average receive uplink quality of the serving cell, as used by the handover algorithm. External comment:
--
number
R08
Observation Name AV_RXQUAL_DL_HO (11)
Length 1
Observation Indicates the average receive downlink quality of the serving cell, as used by the handover algorithm. External comment:
--
number
Edition: 13 Released
Page 149
Evolium
R09
Observation Name AV_RANGE_HO (11)
Length 1
Observation Indicates the average distanc between Mobile and Base station, as used by the handover algorithm. External comment:
--
sec
R10
Observation Name MS_TXPWR Observation Transmit power at the Mobile. External comment:
--
Length 1
dBm
R1013
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
Edition: 13 Released
Page 150
Evolium
R1014
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
R1015
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
R1016
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
Edition: 13 Released
Page 151
Evolium
R11
Observation Name BS_TXPWR Observation Transmit power at the BTS. External comment:
--
Length 1
dB
R1113
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
R1114
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 152
Evolium
R1115
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
R1116
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
R113
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
Edition: 13 Released
Page 153
Evolium
R114
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
R115
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
R116
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
Edition: 13 Released
Page 154
Evolium
R118
Observation Name SCRAMBLING_CODE Observation The scrambling code of a 3G FDD neighboring cell. External comment:
--
Length 2
number
R119
Observation Name FDD_FREQ
Length 2
Observation The UTRAN Absolute Radio Frequency Number of a 3G FDD neighboring cell. External comment:
--
number
R12
Observation Name BTSNUM
Length 1
Observation Indicates the number of neighboring cells for which measurements made by the Mobile are available during the averaging interval. Measurements of up to 32 Neighboring cells can be provided. External comment:
--
number
Edition: 13 Released
Page 155
Evolium
R120
Observation Name AV_ECNO
Length 1
Observation The average receive Ec/No of a 3G FDD neighboring cell as seen by the Mobile. External comment:
--
dBm
R1213
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
R1214
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 156
Evolium
R1215
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
R1216
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
R1313
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
Edition: 13 Released
Page 157
Evolium
R1314
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
R1315
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
R1316
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
Edition: 13 Released
Page 158
Evolium
R1413
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
R1414
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
R1415
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
Edition: 13 Released
Page 159
Evolium
R1416
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
R1513
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
R1514
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 160
Evolium
R1515
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
R1516
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
R1613
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
Edition: 13 Released
Page 161
Evolium
R1614
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
R1615
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
R1616
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
Edition: 13 Released
Page 162
Evolium
R17
Observation Name SAMPLE_RATE Observation Indicates the sample rate value at the time the observation is collected. External comment:
--
Length 1
number
R1713
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
R1714
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 163
Evolium
R1715
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
R1716
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
R1813
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
Edition: 13 Released
Page 164
Evolium
R1814
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
R1815
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
R1816
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
Edition: 13 Released
Page 165
Evolium
R1913
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
R1914
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
R1915
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
Edition: 13 Released
Page 166
Evolium
R1916
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
R2013
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
R2014
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 167
Evolium
R2015
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
R2016
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
R2113
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
Edition: 13 Released
Page 168
Evolium
R2114
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
R2115
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
R2116
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
Edition: 13 Released
Page 169
Evolium
R213
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
R214
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
R215
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
Edition: 13 Released
Page 170
Evolium
R216
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
R218
Observation Name SCRAMBLING_CODE Observation The scrambling code of a 3G FDD neighboring cell. External comment:
--
Length 2
number
R219
Observation Name FDD_FREQ
Length 2
Observation The UTRAN Absolute Radio Frequency Number of a 3G FDD neighboring cell. External comment:
--
number
Edition: 13 Released
Page 171
Evolium
R220
Observation Name AV_ECNO
Length 1
Observation The average receive Ec/No of a 3G FDD neighboring cell as seen by the Mobile. External comment:
--
dBm
R2213
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
R2214
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 172
Evolium
R2215
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
R2216
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
R2313
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
Edition: 13 Released
Page 173
Evolium
R2314
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
R2315
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
R2316
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
Edition: 13 Released
Page 174
Evolium
R2413
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
R2414
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
R2415
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
Edition: 13 Released
Page 175
Evolium
R2416
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
R2513
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
R2514
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 176
Evolium
R2515
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
R2516
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
R2613
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
Edition: 13 Released
Page 177
Evolium
R2614
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
R2615
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
R2616
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
Edition: 13 Released
Page 178
Evolium
R2713
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
R2714
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
R2715
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
Edition: 13 Released
Page 179
Evolium
R2716
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
R2813
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
R2814
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 180
Evolium
R2815
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
R2816
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
R2913
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
Edition: 13 Released
Page 181
Evolium
R2914
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
R2915
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
R2916
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
Edition: 13 Released
Page 182
Evolium
R3013
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
R3014
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
R3015
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
Edition: 13 Released
Page 183
Evolium
R3016
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
R3113
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
R3114
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 184
Evolium
R3115
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
R3116
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
R313
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
Edition: 13 Released
Page 185
Evolium
R314
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
R315
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
R316
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
Edition: 13 Released
Page 186
Evolium
R318
Observation Name SCRAMBLING_CODE Observation The scrambling code of a 3G FDD neighboring cell. External comment:
--
Length 2
number
R319
Observation Name FDD_FREQ
Length 2
Observation The UTRAN Absolute Radio Frequency Number of a 3G FDD neighboring cell. External comment:
--
number
R320
Observation Name AV_ECNO
Length 1
Observation The average receive Ec/No of a 3G FDD neighboring cell as seen by the Mobile. External comment:
--
dBm
Edition: 13 Released
Page 187
Evolium
R3213
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
R3214
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
R3215
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
Edition: 13 Released
Page 188
Evolium
R3216
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
R413
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
R414
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 189
Evolium
R415
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
R416
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
R418
Observation Name SCRAMBLING_CODE Observation The scrambling code of a 3G FDD neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 190
Evolium
R419
Observation Name FDD_FREQ
Length 2
Observation The UTRAN Absolute Radio Frequency Number of a 3G FDD neighboring cell. External comment:
--
number
R420
Observation Name AV_ECNO
Length 1
Observation The average receive Ec/No of a 3G FDD neighboring cell as seen by the Mobile. External comment:
--
dBm
R513
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
Edition: 13 Released
Page 191
Evolium
R514
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
R515
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
R516
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
Edition: 13 Released
Page 192
Evolium
R518
Observation Name SCRAMBLING_CODE Observation The scrambling code of a 3G FDD neighboring cell. External comment:
--
Length 2
number
R519
Observation Name FDD_FREQ
Length 2
Observation The UTRAN Absolute Radio Frequency Number of a 3G FDD neighboring cell. External comment:
--
number
R520
Observation Name AV_ECNO
Length 1
Observation The average receive Ec/No of a 3G FDD neighboring cell as seen by the Mobile. External comment:
--
dBm
Edition: 13 Released
Page 193
Evolium
R613
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
R614
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
R615
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
Edition: 13 Released
Page 194
Evolium
R616
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
R618
Observation Name SCRAMBLING_CODE Observation The scrambling code of a 3G FDD neighboring cell. External comment:
--
Length 2
number
R619
Observation Name FDD_FREQ
Length 2
Observation The UTRAN Absolute Radio Frequency Number of a 3G FDD neighboring cell. External comment:
--
number
Edition: 13 Released
Page 195
Evolium
R620
Observation Name AV_ECNO
Length 1
Observation The average receive Ec/No of a 3G FDD neighboring cell as seen by the Mobile. External comment:
--
dBm
R713
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
R714
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 196
Evolium
R715
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
R716
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
R718
Observation Name SCRAMBLING_CODE Observation The scrambling code of a 3G FDD neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 197
Evolium
R719
Observation Name FDD_FREQ
Length 2
Observation The UTRAN Absolute Radio Frequency Number of a 3G FDD neighboring cell. External comment:
--
number
R720
Observation Name AV_ECNO
Length 1
Observation The average receive Ec/No of a 3G FDD neighboring cell as seen by the Mobile. External comment:
--
dBm
R813
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
Edition: 13 Released
Page 198
Evolium
R814
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
R815
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
R816
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
Edition: 13 Released
Page 199
Evolium
R818
Observation Name SCRAMBLING_CODE Observation The scrambling code of a 3G FDD neighboring cell. External comment:
--
Length 2
number
R819
Observation Name FDD_FREQ
Length 2
Observation The UTRAN Absolute Radio Frequency Number of a 3G FDD neighboring cell. External comment:
--
number
R820
Observation Name AV_ECNO
Length 1
Observation The average receive Ec/No of a 3G FDD neighboring cell as seen by the Mobile. External comment:
--
dBm
Edition: 13 Released
Page 200
Evolium
R913
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
R914
Observation Name BCCH_FREQ Observation The Absolute BCCH Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
R915
Observation Name AV_RXLEV_NCELL Observation The average receive level of a neighboring cell as seen by the Mobile. External comment:
--
Length 1
dBm
Edition: 13 Released
Page 201
Evolium
R916
Observation Name PBGT
Length 1
Observation The Power Budget evaluation of reception of a neighboring cell related to the serving cell. External comment:
--
dBm
Edition: 13 Released
Page 202
Type number: Type name: Type scope (per BSS): Candidate for Standard
Type limitations (per BSS): The maximum number of cells observed for this measurement type is 15 cells. Type definition: This measurement type provides observations on internal intra-cell or inter-cell SDCCH or TCH (in HR or FR usage) handover. An observation is composed of a set of records, each record being related to a single channel seizure within the observed cell. A record is a consistent structure of data made up of several fields (called DER) providing information about the radio configuration and about specific events that are cumulated. Not all channel seizures are observed in the cell, but one per sample_rate value. For an observed channel, the recording of data starts in the BSC as soon as 04.08HANDOVER COMMAND (for inter-cell handover) or 04.08ASSIGNMENT COMMAND (for intra-cell handover) is sent on Abis by the BSC.
Observation - 12
Evolium
HO1
Observation Name SIGNALLING_TRAFFIC_IND
Length 1
Observation Indicates whether or not the observation record relates to an SDCCH handover or RTCH handover attempt. Valid coding is provided below, all other codings are invalid. 0: handover was for an SDCCH Sub-channel 1: handover was for an RTCH channel. External comment:
--
number
HO1047
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
Edition: 13 Released
Page 203
Evolium
HO1048
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
HO1049
Observation Name RXLEV Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
Length 4
dBm
Edition: 13 Released
Page 204
Evolium
HO11
Observation Name HO_CAUSE Observation Indicates the reason for the external handover attempt.
Length 1
number
Valid codings for handovers are as follows in the left column of the table below. All other codings are invalid. The right column of the table gives the causes reported to the MSC on the A interface in the 48.008 HANDOVER REQUIRED message and which are in accordance with GSM 48.008 . ALCATEL BSS causes for Emergency handovers | A interface GSM 48.008 cause value -----------------------------------------------------------------------------------------------------------------------------------7: several consecutive bad SACCH frames received in a micro-cell | 0000010: uplink quality 17: too low level on the uplink in a microcell compared to a high | 0000011: uplink strength threshold | 18: too low level on the downlink in a microcell compared to a high | 0000101: downlink strength threshold | 2: too low quality on the uplink | 0000010: uplink quality 4: too low quality on the downlink | 0000100: downlink quality 3: too low level on the uplink | 0000011: uplink strength 5: too low level on the downlink | 0000101: downlink strength 6: too long MS-BTS distance | 0000110: distance ALCATEL BSS causes for Better cell handovers | A interface GSM 48.008 cause value
---------------------------------------------------------------------------------------------------------------------------------14: high level in neighbour overlaid cell for slow MS | 0001100: better cell 12: too low power budget ("better cell") | 0000011: better cell 21: preferred band handover | 0001100: better cell 23: traffic handover | 0001111: traffic remark : causes numbered 8 & 9 have been removed for release 4. - Causes 2, 3, 4, 5 & 6 apply to any kind of serving cells (macro/micro, single layer/lower layer/upper layer, normal/concentric). As these causes are internal to the cell, there is no constraint relatively to the cell environment. - Causes 7, 17, 18 apply only to serving micro-cells. As cause 7 is internal to the cell, the target cell may be a neighbour upper layer cell or a neighbour micro-cell. Causes 17 & 18 apply to a serving micro-cell handover towards a target upper layer cell. - Cause 12 applies to both serving and target neighbour cells belonging to the same layer whatever their size is. For macro/micro cells, this cause applies to handovers : from single layer to single layer from single layer to upper layer from upper layer to upper layer from upper layer to single layer from lower layer to lower layer - Cause 14 applies to a serving upper layer cell handover towards a target macro/micro lower layer cell. External comment:
--
Edition: 13 Released
Page 205
Evolium
HO1147
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO1148
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
HO1149
Observation Name RXLEV Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
Length 4
dBm
Edition: 13 Released
Page 206
Evolium
HO12
Observation Name SYNCHRONIZED
Length 1
Observation Indicates whether or not the observed external incoming handover is between 2 synchronized BTS. Valid coding is provided below, all other codings are invalid. 0: The Target and Serving BTS are not synchronized 1: The Target and Serving BTS are synchronized. It should be noted that synchronized external handovers only occur when they are Intra-BSS. External comment:
--
number
HO1247
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO1248
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 207
Evolium
HO1249
Observation Name RXLEV Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
Length 4
dBm
HO1347
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO1348
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 208
Evolium
HO1349
Observation Name RXLEV Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
Length 4
dBm
HO1447
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO1448
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 209
Evolium
HO1449
Observation Name RXLEV Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
Length 4
dBm
HO147
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO148
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 210
Evolium
HO149
Observation Name RXLEV Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
Length 4
dBm
HO1547
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO1548
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 211
Evolium
HO1549
Observation Name RXLEV Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
Length 4
dBm
HO1647
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO1648
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 212
Evolium
HO1649
Observation Name RXLEV Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
Length 4
dBm
HO2
Observation Name INTRA_INTER_CELL_IND
Length 1
Observation Indicates whether or not the observation record relates to an intra-cell handover or an inter-cell handover attempt. Valid coding is provided below, all other codings are invalid. 0: An intra-cell handover was attempted 1: An inter-cell handover was attempted. External comment:
--
number
HO23
Observation Name A_LEV_HO
Length 1
Observation Averaging window size for calculating the Uplink and Downlink Levels of the serving cell. This value is in the range 1 to 31 SACCH Multi-frames. External comment:
--
Samfr
Edition: 13 Released
Page 213
Evolium
HO23a
Observation Name A_LEV_MCHO
Length 1
Observation This Observation data is only related to microcellular environment. It is the averaging window size for calculating the Uplink and Downlink Levels of the serving cell in a microcellular environment. This value is in the range 1 to 15 SACCH Multi-frames. External comment:
--
Samfr
HO247
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO248
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 214
Evolium
HO249
Observation Name RXLEV Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
Length 4
dBm
HO25
Observation Name AV_RXLEV_UL_HO (12) Observation The last average Uplink Level of the serving cell. External comment:
--
Length 4
dBm
HO25a
Observation Name AV_RXLEV_UL_MCHO (12)
Length 4
Observation This Observation data is only related to microcellular environment. It is the last average Uplink Level for microcell handover purposes of the serving cell. External comment:
--
dBm
Edition: 13 Released
Page 215
Evolium
HO26
Observation Name AV_RXLEV_DL_HO (12) Observation The last average Downlink Level of the serving cell. External comment:
--
Length 4
dBm
HO26a
Observation Name AV_RXLEV_DL_MCHO (12)
Length 4
Observation This Observation data is only related to microcellular environment. It indicates the average receive Downlink Level of the serving cell, as used by the handover algorithm. External comment:
--
dBm
HO27
Observation Name A_PBGT_HO
Length 1
Observation Averaging window size for calculating the Power Budget of the serving cell relating to the neighbouring cells. This value is in the range 1 to 31 SACCH Multi-frames. External comment:
--
Samfr
Edition: 13 Released
Page 216
Evolium
HO29
Observation Name AV_RXLEV_PBGT_HO (12) Observation The last average Downlink Power Budget of the serving cell. External comment:
--
Length 4
dBm
HO3
Observation Name HO_REQUIRED_TIME_STAMP
Length 16
Observation Indicates the Absolute Date and Time at which the 48.008 HANDOVER REQUIRED message was sent. The time is accurate to tenths of seconds. External comment:
--
Date/Time
HO30
Observation Name A_QUAL_HO
Length 1
Observation Averaging window size for calculating the Uplink and Downlink Qualities of the serving cell. This value is in the range 1 to 31 SACCH Multi-frames. External comment:
--
Samfr
Edition: 13 Released
Page 217
Evolium
HO32
Observation Name AV_RXQUAL_UL_HO (12) Observation The last average Uplink Quality of the serving cell. External comment:
--
Length 4
number
HO33
Observation Name AV_RXQUAL_DL_HO (12) Observation The last average Downlink Quality of the serving cell. External comment:
--
Length 4
number
HO34
Observation Name A_RANGE_HO
Length 1
Observation Averaging window size for calculating the Distance of the serving cell. This value is in the range 1 to 31 SACCH Multi-frames. External comment:
--
Samfr
Edition: 13 Released
Page 218
Evolium
HO347
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO348
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
HO349
Observation Name RXLEV Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
Length 4
dBm
Edition: 13 Released
Page 219
Evolium
HO36
Observation Name AV_RANGE_HO (12) Observation The last average Distance of the serving cell. External comment:
--
Length 4
sec
HO37
Observation Name MS_TXPWR Observation Transmit power at the Mobile. External comment:
--
Length 1
dBm
HO38
Observation Name BS_TXPWR Observation Transmit power at the BTS. External comment:
--
Length 1
dB
Edition: 13 Released
Page 220
Evolium
HO447
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO448
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
HO449
Observation Name RXLEV Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
Length 4
dBm
Edition: 13 Released
Page 221
Evolium
HO5
Observation Name OLD_CHANNEL_ID
Length 5
Observation The serving channel identity of the external handover, including BTS Number, Sector Number, TRX Number, TRX Timeslot, and Sub-channel which is only significant in case of an SDCCH channel or in case of an half rate TCH channel. Note : The sub-channel field may take a value contained between 0 and 7 in case of an SDCCH channel. It may take a value contained between 0 and 1 in case of an half rate TCH channel. In case of a full rate TCH channel the sub-channel field which is not significant is set to zero. External comment:
--
number
HO547
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO548
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 222
Evolium
HO549
Observation Name RXLEV Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
Length 4
dBm
HO5a
Observation Name OLD_RTCH_TYPE
Length 1
Observation This counter is only relevant in case the serving channel is an RTCH channel. The serving channel type of the internal handover to which the Observation relates : 0: for a full rate RTCH channel 1: for an half rate RTCH channel In case of an SDCCH channel, the non-significant value 0xFF is used. External comment:
--
number
HO6
Observation Name NEW_CHANNEL_ID
Length 5
Observation The target channel identity of the external incoming handover, including BTS Number, Sector Number, TRX Number, TRX Timeslot, and Sub-channel which is only significant in case of an SDCCH channel or in case of an half rate TCH channel. If the target channel identity is not known, then the BTS Number and Sector Number are provided, and TRX Number, TRX Timeslot, and Sub-channel are set to zero. Note : The sub-channel field may take a value contained between 0 and 7 in case of an SDCCH channel. It takes a value contained between 0 and 1 in case of an half rate TCH channel. In case of a full rate TCH channel the sub-channel field which is not significant is set to zero. External comment:
--
number
Edition: 13 Released
Page 223
Evolium
HO647
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO648
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
HO649
Observation Name RXLEV Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
Length 4
dBm
Edition: 13 Released
Page 224
Evolium
HO6a
Observation Name NEW_RTCH_TYPE
Length 1
Observation This counter is only relevant in case the target channel is an RTCH channel. The target channel type of the internal handover to which the Observation relates : 0: for a full rate RTCH channel 1: for an half rate RTCH channel In case of an SDCCH channel, the non-significant value 0xFF is used. External comment:
--
number
HO7
Observation Name INT_HO_SUCCESS_FAILURE_IND
Length 1
Observation Indicates whether the observed internal handover is successful or not. Valid coding is provided below, all other codings are invalid. 0: Successful handover - 44.018 HANDOVER COMPLETE or 44.018 ASSIGNMENT COMPLETE message was received during an internal handover 1: LAPD failure 2: Other BSS problems - hardware failure (BSC or BTS or transmission equipment) - software failure (BSC or BTS or transmission equipment) 3: MS access problems where the mobile reverts to the old channel - 44.018 HANDOVER FAILURE or 44.018 ASSIGNMENT FAILURE message was received during an internal handover 4: MS access problems where the mobile does not revert to the old channel - T3103 expiry (internal intercell handover) - T3107 expiry (internal intracell handover - 48.058 CONNECTION FAILURE INDICATION(radio interface failure) or 48.058 ERROR INDICATION(any cause) was received during an internal handover External comment:
--
number
Edition: 13 Released
Page 225
Evolium
HO74
Observation Name SAMPLE_RATE Observation Indicates the sample rate value at the time the observation is collected. External comment:
--
Length 1
number
HO747
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO748
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 226
Evolium
HO749
Observation Name RXLEV Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
Length 4
dBm
HO75
Observation Name MS_SPEED
Length 1
Observation This Observation data is only related to microcellular environment. It is an estimation for mobile speed discrimination process used to initiate or not a handover from an upper layer cell to an lower layer cell. The coding of this parameter is the following: - 0 : indefinite - 1 : slow - 2 : fast External comment:
--
number
HO8
Observation Name HO_DURATION
Length 2
Observation Indicates the time in tenths of seconds between the sending of the 44.018 HANDOVER COMMAND message and the reception of the 44.018 HANDOVER COMPLETE message for an internal inter-cell handover. Indicates the time in tenths of seconds between the sending of the 44.018 ASSIGNMENT COMMAND message and the reception of the 44.018 ASSIGNMENT COMPLETE message for an internal intra-cell External comment:
--
100ms
Edition: 13 Released
Page 227
Evolium
HO847
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO848
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
HO849
Observation Name RXLEV Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
Length 4
dBm
Edition: 13 Released
Page 228
Evolium
HO947
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO948
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
HO949
Observation Name RXLEV Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
Length 4
dBm
Edition: 13 Released
Page 229
Type number: Type name: Type scope (per BSS): Candidate for Standard
Observation - 13
Evolium
Type limitations (per BSS): The maximum number of cells observed for this measurement type is 15 cells. Type definition: This measurement type provides observations on incoming external SDCCH or TCH (in HR or FR usage) handover. An observation is composed of a set of records, each record being related to a single channel seizure within the observed cell. A record is a consistent structure of data made up of several fields (called DER) providing information about the radio configuration and about specific events that are cumulated. Not all channel seizures are observed in the cell, but one per sample_rate value. For an observed channel, the recording of data starts in the BSC as soon as 08.08HANDOVER REQUEST is sent on A interface by the BSC.
HO40
Observation Name SIGNALLING_TRAFFIC_IND
Length 1
Observation Indicates whether or not the observation record relates to an SDCCH handover or RTCH handover attempt. Valid coding is provided below, all other codings are invalid. 0: handover was for an SDCCH Sub-channel 1: handover was for an RTCH channel. External comment:
--
number
HO41
Observation Name INCOMING_HO_IND
Length 1
Observation Indicates whether or not the observation record relates to an external incoming handover. Valid coding is provided below, all other codings are invalid. 1: handover was external incoming to the identified channel. External comment:
--
number
Edition: 13 Released
Page 230
Evolium
HO42
Observation Name HO_REQUEST_TIME_STAMP
Length 16
Observation Indicates the Absolute Date and Time at which the 48.008 HANDOVER REQUEST message was received. The time is accurate to tenths of seconds. External comment:
--
Date/Time
HO43
Observation Name NEW_CHANNEL_ID
Length 5
Observation The target channel identity of the external incoming handover, including BTS Number, Sector Number, TRX Number, TRX Timeslot, and Sub-channel which is only significant in case of an SDCCH channel or in case of an half rate TCH channel. If the target channel identity is not known, then the BTS Number and Sector Number are provided, and TRX Number, TRX Timeslot, and Sub-channel are set to zero. Note : The sub-channel field may take a value contained between 0 and 7 in case of an SDCCH channel. It takes a value contained between 0 and 1 in case of an half rate TCH channel. In case of a full rate TCH channel the sub-channel field which is not significant is set to zero. External comment:
--
number
HO43a
Observation Name NEW_RTCH_TYPE
Length 1
Observation This counter is only relevant in case the target channel is an RTCH channel. The target channel type of the internal handover to which the Observation relates : 0: for a full rate RTCH channel 1: for an half rate RTCH channel In case of an SDCCH channel, the non-significant value 0xFF is used. External comment:
--
number
Edition: 13 Released
Page 231
Evolium
HO44
Observation Name INC_EXT_HO_SUCCESS_FAILURE_IND
Length 1
Observation Indicates whether the observed incomming external handover is successful or not. Valid coding is provided below, all other codings are invalid. 0: Successful handover - 44.018 HANDOVER COMPLETE message was received during an incomming external handover 1: LAPD failure 2: Other BSS problems - hardware failure (BSC or BTS or transmission equipment) - software failure (BSC or BTS or transmission equipment) 3: MS access problems where the mobile reverts to the old channel - 48.008 CLEAR COMMAND(radio interface failure, reversion to old channel) message was received while waiting for an answer from the MS - an SCCP connection was released while waiting an answer from the MS or a CLEAR COMMAND - T9113 expiry during an incoming external handover - 48.058 CONNECTION FAILURE INDICATION(handover access failure) message was received 4: MS access problems where the mobile does not revert to the old channel - 48.008 CLEAR COMMAND message was received before having sent HANDOVER COMMAND to the MS - 48.008 CLEAR COMMAND(any cause but radio interface failure, reversion to old channel) message was received while waiting for an answe from the MS - RESET message was received from the MSC External comment:
--
number
HO45
Observation Name SYNCHRONIZED
Length 1
Observation Indicates whether or not the observed external incoming handover is between 2 synchronized BTS. Valid coding is provided below, all other codings are invalid. 0: The Target and Serving BTS are not synchronized 1: The Target and Serving BTS are synchronized. It should be noted that synchronized external handovers only occur when they are Intra-BSS. External comment:
--
number
Edition: 13 Released
Page 232
Evolium
HO46
Observation Name SAMPLE_RATE
Length 1
Observation Indicates the sample rate value at the time the observation is collected. External comment:
--
number
Edition: 13 Released
Page 233
Type number: Type name: Type scope (per BSS): Candidate for Standard
Observation - 14
Evolium
Type limitations (per BSS): The maximum number of cells observed for this measurement type is 15 cells. Type definition: This measurement type provides observations on outgoing external SDCCH or TCH (in HR or FR usage) handover. An observation is composed of a set of records, each record being related to a single channel seizure within the observed cell. A record is a consistent structure of data made up of several fields (called DER) providing information about the radio configuration and about specific events that are cumulated. Not all channel seizures are observed in the cell, but one per sample_rate value. For an observed channel, the recording of data starts in the BSC as soon as 48.008 HANDOVER COMMAND is received on A interface by the BSC.
HO10100
Observation Name RXLEV
Length 4
Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
dBm
HO1098
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
Edition: 13 Released
Page 234
Evolium
HO1099
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
HO1100
Observation Name RXLEV
Length 4
Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
dBm
HO1101
Observation Name SCRAMBLING_CODE Observation The scrambling code of a 3G FDD neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 235
Evolium
HO1102
Observation Name FDD_FREQ
Length 2
Observation The UTRAN Absolute Radio Frequency Number of a 3G FDD neighboring cell. External comment:
--
number
HO1103
Observation Name AV_ECNO
Length 1
Observation The average receive Ec/No of a 3G FDD neighboring cell as seen by the Mobile. External comment:
--
dBm
HO111
Observation Name SAMPLE_RATE
Length 1
Observation Indicates the sample rate value at the time the observation is collected. External comment:
--
number
Edition: 13 Released
Page 236
Evolium
HO11100
Observation Name RXLEV
Length 4
Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
dBm
HO1198
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO1199
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 237
Evolium
HO12100
Observation Name RXLEV
Length 4
Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
dBm
HO1298
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO1299
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 238
Evolium
HO13100
Observation Name RXLEV
Length 4
Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
dBm
HO1398
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO1399
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 239
Evolium
HO14100
Observation Name RXLEV
Length 4
Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
dBm
HO1498
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO1499
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 240
Evolium
HO15100
Observation Name RXLEV
Length 4
Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
dBm
HO1598
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO1599
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 241
Evolium
HO16100
Observation Name RXLEV
Length 4
Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
dBm
HO1698
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO1699
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 242
Evolium
HO198
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO199
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
HO2100
Observation Name RXLEV
Length 4
Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
dBm
Edition: 13 Released
Page 243
Evolium
HO2101
Observation Name SCRAMBLING_CODE Observation The scrambling code of a 3G FDD neighboring cell. External comment:
--
Length 2
number
HO2102
Observation Name FDD_FREQ
Length 2
Observation The UTRAN Absolute Radio Frequency Number of a 3G FDD neighboring cell. External comment:
--
number
HO2103
Observation Name AV_ECNO
Length 1
Observation The average receive Ec/No of a 3G FDD neighboring cell as seen by the Mobile. External comment:
--
dBm
Edition: 13 Released
Page 244
Evolium
HO298
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO299
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
HO3100
Observation Name RXLEV
Length 4
Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
dBm
Edition: 13 Released
Page 245
Evolium
HO3101
Observation Name SCRAMBLING_CODE Observation The scrambling code of a 3G FDD neighboring cell. External comment:
--
Length 2
number
HO3102
Observation Name FDD_FREQ
Length 2
Observation The UTRAN Absolute Radio Frequency Number of a 3G FDD neighboring cell. External comment:
--
number
HO3103
Observation Name AV_ECNO
Length 1
Observation The average receive Ec/No of a 3G FDD neighboring cell as seen by the Mobile. External comment:
--
dBm
Edition: 13 Released
Page 246
Evolium
HO398
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO399
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
HO4100
Observation Name RXLEV
Length 4
Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
dBm
Edition: 13 Released
Page 247
Evolium
HO4101
Observation Name SCRAMBLING_CODE Observation The scrambling code of a 3G FDD neighboring cell. External comment:
--
Length 2
number
HO4102
Observation Name FDD_FREQ
Length 2
Observation The UTRAN Absolute Radio Frequency Number of a 3G FDD neighboring cell. External comment:
--
number
HO4103
Observation Name AV_ECNO
Length 1
Observation The average receive Ec/No of a 3G FDD neighboring cell as seen by the Mobile. External comment:
--
dBm
Edition: 13 Released
Page 248
Evolium
HO498
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO499
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
HO5100
Observation Name RXLEV
Length 4
Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
dBm
Edition: 13 Released
Page 249
Evolium
HO5101
Observation Name SCRAMBLING_CODE Observation The scrambling code of a 3G FDD neighboring cell. External comment:
--
Length 2
number
HO5102
Observation Name FDD_FREQ
Length 2
Observation The UTRAN Absolute Radio Frequency Number of a 3G FDD neighboring cell. External comment:
--
number
HO5103
Observation Name AV_ECNO
Length 1
Observation The average receive Ec/No of a 3G FDD neighboring cell as seen by the Mobile. External comment:
--
dBm
Edition: 13 Released
Page 250
Evolium
HO598
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO599
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
HO60
Observation Name SIGNALLING_TRAFFIC_IND
Length 1
Observation Indicates whether or not the observation record relates to an SDCCH handover or RTCH handover attempt. Valid coding is provided below, all other codings are invalid. 0: handover was for an SDCCH Sub-channel 1: handover was for an RTCH channel. External comment:
--
number
Edition: 13 Released
Page 251
Evolium
HO61
Observation Name OUTGOING_HO_IND
Length 1
Observation Indicates whether or not the observation record relates to an external outgoing handover. Valid coding is provided below, all other codings are invalid. 0: handover was external outgoing from the identified channel. External comment:
--
number
HO6100
Observation Name RXLEV
Length 4
Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
dBm
HO6101
Observation Name SCRAMBLING_CODE Observation The scrambling code of a 3G FDD neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 252
Evolium
HO6102
Observation Name FDD_FREQ
Length 2
Observation The UTRAN Absolute Radio Frequency Number of a 3G FDD neighboring cell. External comment:
--
number
HO6103
Observation Name AV_ECNO
Length 1
Observation The average receive Ec/No of a 3G FDD neighboring cell as seen by the Mobile. External comment:
--
dBm
HO62
Observation Name HO_REQUIRED_TIME_STAMP
Length 16
Observation Indicates the Absolute Date and Time at which the 48.008 HANDOVER REQUIRED message was sent. The time is accurate to tenths of seconds. External comment:
--
Date/Time
Edition: 13 Released
Page 253
Evolium
HO63
Observation Name HO_REQUIRED_NB
Length 2
Observation Indicates the number of BSS generated 48.008 HANDOVER REQUIRED messages generated during the handover procedure. External comment:
--
number
HO64
Observation Name OLD_CHANNEL_ID
Length 5
Observation The serving channel identity of the external handover, including BTS Number, Sector Number, TRX Number, TRX Timeslot, and Sub-channel which is only significant in case of an SDCCH channel or in case of an half rate TCH channel. Note : The sub-channel field may take a value contained between 0 and 7 in case of an SDCCH channel. It may take a value contained between 0 and 1 in case of an half rate TCH channel. In case of a full rate TCH channel the sub-channel field which is not significant is set to zero. External comment:
--
number
HO64a
Observation Name OLD_RTCH_TYPE
Length 1
Observation This counter is only relevant in case the serving channel is an RTCH channel. The serving channel type of the internal handover to which the Observation relates : 0: for a full rate RTCH channel 1: for an half rate RTCH channel In case of an SDCCH channel, the non-significant value 0xFF is used. External comment:
--
number
Edition: 13 Released
Page 254
Evolium
HO65
Length 1
Observation Indicates whether the observed outgoing external handover is successful or not. Valid coding is provided below, all other codings are invalid.
number
0: Successful handover or call released while external handover - 48.008 CLEAR COMMAND message received with a cause value of "handover successful" during external handover - 48.008 CLEAR COMMAND message received with a cause value of "normal event/call control" while T8 is running 1: LAPD failure 2: Other BSS problems - hardware failure (BSC or BTS or transmission equipment) - software failure (BSC or BTS or transmission equipment) 3: MS access problems where the mobile reverts to the old channel - 44.018 HANDOVER FAILURE message received during external handover 4: MS access problems where the mobile does not revert to the old channel - T8 expiry during external handover or a 48.058 ERROR INDICATION(any cause) message is received External comment:
--
Edition: 13 Released
Page 255
Evolium
HO68
Observation Name HO_CAUSE Observation Indicates the reason for the external handover attempt.
Length 1
number
Valid codings for handovers are as follows in the left column of the table below. All other codings are invalid. The right column of the table gives the causes reported to the MSC on the A interface in the 48.008 HANDOVER REQUIRED message and which are in accordance with GSM 48.008 . ALCATEL BSS causes for Emergency handovers | A interface GSM 48.008 cause value -----------------------------------------------------------------------------------------------------------------------------------7: several consecutive bad SACCH frames received in a micro-cell | 0000010: uplink quality 17: too low level on the uplink in a microcell compared to a high | 0000011: uplink strength threshold | 18: too low level on the downlink in a microcell compared to a high | 0000101: downlink strength threshold | 2: too low quality on the uplink | 0000010: uplink quality 4: too low quality on the downlink | 0000100: downlink quality 3: too low level on the uplink | 0000011: uplink strength 5: too low level on the downlink | 0000101: downlink strength 6: too long MS-BTS distance | 0000110: distance ALCATEL BSS causes for Better cell handovers | A interface GSM 48.008 cause value
---------------------------------------------------------------------------------------------------------------------------------14: high level in neighbour overlaid cell for slow MS | 0001100: better cell 12: too low power budget ("better cell") | 0000011: better cell 21: preferred band handover | 0001100: better cell 23: traffic handover | 0001111: traffic remark : causes numbered 8 & 9 have been removed for release 4. - Causes 2, 3, 4, 5 & 6 apply to any kind of serving cells (macro/micro, single layer/lower layer/upper layer, normal/concentric). As these causes are internal to the cell, there is no constraint relatively to the cell environment. - Causes 7, 17, 18 apply only to serving micro-cells. As cause 7 is internal to the cell, the target cell may be a neighbour upper layer cell or a neighbour micro-cell. Causes 17 & 18 apply to a serving micro-cell handover towards a target upper layer cell. - Cause 12 applies to both serving and target neighbour cells belonging to the same layer whatever their size is. For macro/micro cells, this cause applies to handovers : from single layer to single layer from single layer to upper layer from upper layer to upper layer from upper layer to single layer from lower layer to lower layer - Cause 14 applies to a serving upper layer cell handover towards a target macro/micro lower layer cell. External comment:
--
Edition: 13 Released
Page 256
Evolium
HO698
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO699
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
HO7100
Observation Name RXLEV
Length 4
Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
dBm
Edition: 13 Released
Page 257
Evolium
HO7101
Observation Name SCRAMBLING_CODE Observation The scrambling code of a 3G FDD neighboring cell. External comment:
--
Length 2
number
HO7102
Observation Name FDD_FREQ
Length 2
Observation The UTRAN Absolute Radio Frequency Number of a 3G FDD neighboring cell. External comment:
--
number
HO7103
Observation Name AV_ECNO
Length 1
Observation The average receive Ec/No of a 3G FDD neighboring cell as seen by the Mobile. External comment:
--
dBm
Edition: 13 Released
Page 258
Evolium
HO76
Observation Name MS_SPEED
Length 1
Observation This Observation data is only related to microcellular environment. It is an estimation for mobile speed discrimination process used to initiate or not a handover from an upper layer cell to an lower layer cell. The coding of this parameter is the following: - 0 : indefinite - 1 : slow - 2 : fast External comment:
--
number
HO798
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO799
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 259
Evolium
HO80
Observation Name A_LEV_HO
Length 1
Observation Averaging window size for calculating the Uplink and Downlink Levels of the serving cell. This value is in the range 1 to 31 SACCH Multi-frames. External comment:
--
Samfr
HO80a
Observation Name A_LEV_MCHO
Length 1
Observation This Observation data is only related to microcellular environment. It is the averaging window size for calculating the Uplink and Downlink Levels of the serving cell in a microcellular environment. This value is in the range 1 to 15 SACCH Multi-frames. External comment:
--
Samfr
HO8100
Observation Name RXLEV
Length 4
Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
dBm
Edition: 13 Released
Page 260
Evolium
HO8101
Observation Name SCRAMBLING_CODE Observation The scrambling code of a 3G FDD neighboring cell. External comment:
--
Length 2
number
HO8102
Observation Name FDD_FREQ
Length 2
Observation The UTRAN Absolute Radio Frequency Number of a 3G FDD neighboring cell. External comment:
--
number
HO8103
Observation Name AV_ECNO
Length 1
Observation The average receive Ec/No of a 3G FDD neighboring cell as seen by the Mobile. External comment:
--
dBm
Edition: 13 Released
Page 261
Evolium
HO82
Observation Name AV_RXLEV_UL_HO (12) Observation The last average Uplink Level of the serving cell. External comment:
--
Length 4
dBm
HO82a
Observation Name AV_RXLEV_UL_MCHO (12)
Length 4
Observation This Observation data is only related to microcellular environment. It is the last average Uplink Level for microcell handover purposes of the serving cell. External comment:
--
dBm
HO83
Observation Name AV_RXLEV_DL_HO (12) Observation The last average Downlink Level of the serving cell. External comment:
--
Length 4
dBm
Edition: 13 Released
Page 262
Evolium
HO83a
Observation Name AV_RXLEV_DL_MCHO (12)
Length 4
Observation This Observation data is only related to microcellular environment. It indicates the average receive Downlink Level of the serving cell, as used by the handover algorithm. External comment:
--
dBm
HO84
Observation Name A_PBGT_HO
Length 1
Observation Averaging window size for calculating the Power Budget of the serving cell relating to the neighbouring cells. This value is in the range 1 to 31 SACCH Multi-frames. External comment:
--
Samfr
HO86
Observation Name AV_RXLEV_PBGT_HO (12) Observation The last average Downlink Power Budget of the serving cell. External comment:
--
Length 4
dBm
Edition: 13 Released
Page 263
Evolium
HO87
Observation Name A_QUAL_HO
Length 1
Observation Averaging window size for calculating the Uplink and Downlink Qualities of the serving cell. This value is in the range 1 to 31 SACCH Multi-frames. External comment:
--
Samfr
HO89
Observation Name AV_RXQUAL_UL_HO (12) Observation The last average Uplink Quality of the serving cell. External comment:
--
Length 4
number
HO898
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
Edition: 13 Released
Page 264
Evolium
HO899
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
HO90
Observation Name AV_RXQUAL_DL_HO (12) Observation The last average Downlink Quality of the serving cell. External comment:
--
Length 4
number
HO91
Observation Name A_RANGE_HO
Length 1
Observation Averaging window size for calculating the Distance of the serving cell. This value is in the range 1 to 31 SACCH Multi-frames. External comment:
--
Samfr
Edition: 13 Released
Page 265
Evolium
HO9100
Observation Name RXLEV
Length 4
Observation The last 4 a Receive Levels of a neighboring cell as seen by the Mobile. External comment:
--
dBm
HO93
Observation Name AV_RANGE_HO (12) Observation The last average Distance of the serving cell. External comment:
--
Length 4
sec
HO94
Observation Name MS_TXPWR Observation Transmit power at the Mobile. External comment:
--
Length 1
dBm
Edition: 13 Released
Page 266
Evolium
HO95
Observation Name BS_TXPWR Observation Transmit power at the BTS. External comment:
--
Length 1
dB
HO998
Observation Name BSIC Observation The Base Station Identity Code (BSIC) of a neighboring cell. External comment:
--
Length 1
number
HO999
Observation Name FREQ Observation The Absolute Radio Frequency Number of a neighboring cell. External comment:
--
Length 2
number
Edition: 13 Released
Page 267
Type number: Type name: Type scope (per BSS): Candidate for Standard
Type limitations (per BSS): The maximum number of cells observed for this measurement type is 15 cells. Type definition: This measurement type provides observations on the TCH channel. An observation is composed of a set of records, each record being related to a single channel seizure within the observed cell. A record is a consistent structure of data made up of several fields (called DER) providing information about the radio configuration and about specific events that are cumulated. Not all channel seizures are observed in the cell, but one per sample_rate value. For an observed channel, the recording of data starts in the BSC as soon as 08.58CHANNEL ACTIVATION is sent on Abis interface by the BSC.
TCH observation
Observation - 15
Evolium
T01
Observation Name CHANNEL_ID (TCH)
Length 5
Observation The RTCH channel identity to which the Observation relates, including BTS Number, Sector Number, TRX Number, TRX Timeslot and Sub-channel which is only significant in case of an half rate TCH channel. Note : The sub-channel field may take a value contained between 0 and 1 in case of an half rate TCH channel. In case of a full rate TCH channel the sub-channel field which is not significant is set to zero. External comment:
--
number
T01a
Observation Name RTCH_TYPE Observation The RTCH channel type to which the Observation relates : 0: for a full rate RTCH channel 1: for an half rate RTCH channel. External comment:
--
Length 1
number
Edition: 13 Released
Page 268
Evolium
T02
Observation Name CHANNEL_SEIZURE_TIME
Length 16
Observation The Absolute Date and Time at which the RTCH channel was activated (i.e. when the 48.058 CHANNEL ACTIVATION message was sent to the CELL). The time is accurate to tenths of a second. External comment:
--
Date/Time
T03
Observation Name CHANNEL_RELEASE_TIME
Length 16
Observation The Absolute Date and Time at which the RTCH channel was released (i.e. when the 48.058 RF CHANNEL RELEASE ACKNOWLEDGE message was received from the CELL or when the T_RCR_ACK timer expires for the second time). The time is accurate to tenths of a second. External comment:
--
Date/Time
Edition: 13 Released
Page 269
Evolium
T04
Observation Name END_INDICATION (TCH) Observation Describes how the RTCH channel is released. Viz. :
Length 1
number
0: Successful release of RTCH channel - initiated either by the MS, the NSS or the BSS in case of handover 1: LAPD failure 2: Other BSS problems - unsuccessful channel activation - transcoder failure - hardware failure (BSC or BTS or transmission equipment) - software failure (BSC or BTS or transmission equipment) 3: Radio failures during the channel established phase : Radio Link Failures or LAPDm failures - 48.058 CONNECTION FAILURE INDICATION message received with a cause value of "radio link failure" - 48.058 ERROR INDICATION message received 4: MS access problems during the channel establishment phase or a channel change procedure - 44.018 ASSIGNMENT FAILURE received during SDCCH to TCH assignment or internal intra-cell TCH handover - T3107 expiry during normal assignment (SDCCH to TCH or TCH to SDCCH) or internal intra-cell TCH handover - T3103 expiry during internal inter-cell TCH handover or internal directed retry - 44.018 HANDOVER FAILURE message received during internal inter-cell TCH handover or internal directed retry - 48.058 CONNECTION FAILURE INDICATION message received with a cause value of "handover access failure" during internal inter-cell TCH handover or internal directed retry or external handover - T9113 or T8 expiry during external TCH handover External comment:
--
Edition: 13 Released
Page 270
Evolium
T04a
Observation Name SEIZURE_TYPE (TCH) Observation Describes the purpose for which the TCH channel was seized. Viz : 0: The channel was allocated but was never seized by the mobile 1: SDCCH to TCH assignment 2: the channel was the target of a TCH handover or an internal directed retry.
Length 1
number
The table below summerizes information about the seizure and release of the observed TCH channel. T04a provides information on channel seizure. T04 provides information on channel release. ----------------------------------------------------------------------------------------------------------------------------T04a / | 0: | 1: | 2: | | chan not seized by the MS| chan seized by the MS as part | chan seized by the MS as part | | as part of any TCH | of TCH normal assignment | of TCH handover or | T04 | transaction | | internal directed retry | ----------------------------------------------------------------------------------------------------------------------------0: normal rel | applicable for NSS release | applicable for MS, NSS, and | applicable for MS, NSS, and | req by MS, | only | BSS release | BSS release | NSS, or BSS | | | | -----------------------------------------------------------------------------------------------------------------------------1,2: abnormal | applicable | applicable | applicable | rel due to BSS | | | | problem | | | | -----------------------------------------------------------------------------------------------------------------------------3: abnormal | not applicable | applicable | applicable | rel due to radio | | | | link failure | | | | -----------------------------------------------------------------------------------------------------------------------------4: abnormal | applicable for: | applicable for: | applicable for: | release due to | - TCH normal assignment | - SDCCH normal assignment | - SDCCH normal assignment | MS access pb | - internal directed retry | - TCH handover (old | - TCH handover (old | | - TCH handover (new | channel) | channel) | channel) | | ------------------------------------------------------------------------------------------------------------------------------Notes : 1) T04 = 4 and T04a = 0 means : - T04a = 0 : observed TCH channel not seized by the mobile - T04 = 4 : MS access problems on observed TCH channel Observed TCH channel released before having been seized by the mobile (TCH is the target channel of normal assignment, internal directed retry or TCH handover) 2) T04 = 4 and T04a = 1 means : - T04a = 1 : observed TCH channel seized by the mobile as the result of an TCH normal assignment - T04 = 4 : MS problem on accessing a new channel Observed TCH channel first seized by the mobile as the result of a TCH normal assignment and then released during a channel change procedure (SDCCH normal assignment or TCH handover) 3) T04 = 4 and T04a = 2 means : - T04a = 2 : observed SDCCH channel seized by the mobile as the result of an internal directed retry or of a TCH handover - T04 = 4 : MS problem on accessing a new channel Observed TCH channel first seized by the mobile as the result of an internal directed retry or of a TCH handover and then released during a channel change procedure (SDCCH normal assignment or TCH External comment:
--
| |
Edition: 13 Released
Page 271
Evolium
T05
Observation Name MS_POWER Observation Indicates the last commanded MS Power Level on the SACCH Channel to the Mobile. External comment:
--
Length 2
dB
This counter corresponds to the MS_POWER field of the 48.058 PHYSICAL CONTEXT CONFIRM message.
T06
Observation Name BS_POWER Observation Indicates the last commanded BS Power Level to the encoder. External comment:
--
Length 2
dB
This counter corresponds to the BS_POWER field of the 48.058 PHYSICAL CONTEXT CONFIRM message.
T07
Observation Name TIMING_ADVANCE Observation Indicates the last commanded Timing Advance on the SACCH Channel to the Mobile.
Length 2
bper
This counter corresponds to the TIMING_ADVANCE field of the 48.058 PHYSICAL CONTEXT CONFIRM message. External comment:
--
Edition: 13 Released
Page 272
Evolium
T08
Observation Name NB_FRAMES_NOT_REPEATED Observation Indicates the number of SAPI 0 frames that were not repeated. External comment:
--
Length 2
number
This counter corresponds to the CNT_I_TX field of the 48.058 PHYSICAL CONTEXT CONFIRM message.
T15
Observation Name NB_FRAMES_REPEATED Observation Indicates the number of SAPI 0 frames that were repeated at least once. External comment:
--
Length 2
number
This counter corresponds to the CNT_I_RETX field of the 48.058 PHYSICAL CONTEXT CONFIRM message.
T16
Observation Name NB_SABM_AFTER_UA_SENT
Length 1
Observation Indicates the number of SABM received on SAPI 0 when UA has already been sent (i.e. SABM received in established or timer recovery state). This counter corresponds to the CNT_SABM_RX field of the 48.058 PHYSICAL CONTEXT CONFIRM External comment:
--
number
Edition: 13 Released
Page 273
Evolium
T17
Observation Name NB_PHYSICAL_INFO_SENT
Length 1
Observation Indicates the number of times 44.018 PHYSICAL INFORMATION message has been sent in case of asynchronous handover.
number
This counter corresponds to the CNT_PHY_INFO_TX field of the 48.058 PHYSICAL CONTEXT CONFIRM message. External comment:
--
T18
Observation Name NB_ERRONEOUS_FRAMES_SENT Observation Indicates the number of erroneous frames that were received. External comment:
--
Length 1
number
This counter corresponds to the CNT_ERR_RX field of the 48.058 PHYSICAL CONTEXT CONFIRM
T19
Observation Name NB_REJ_FRAMES_SENT Observation Indicates the number of Reject (REJ) frames that were transmitted. External comment:
--
Length 1
number
This counter corresponds to the CNT_REJ_TX field of the 48.058 PHYSICAL CONTEXT CONFIRM message.
Edition: 13 Released
Page 274
Evolium
T20
Observation Name NB_REJ_FRAMES_REC Observation Indicates the number of Reject (REJ) frames that were received. External comment:
--
Length 1
number
This counter corresponds to the CNT_REJ_RX field of the 48.058 PHYSICAL CONTEXT CONFIRM message.
T21
Observation Name NB_MS_TX_PWR_MAX_SENT
Length 1
Observation This counter indicates the number of 48.058 CONNECTION FAILURE INDICATION messages that were sent to the BSS with a cause value of "set YY_TXPWR_M". This counter corresponds to the CNT_MS_TXPWR_MAX field of the 48.058 PHYSICAL CONTEXT CONFIRM message. External comment:
--
number
T22
Observation Name RADIO_LINK_FAILURE_IND Observation Indicates whether or not a Radio Link Failure was detected or not.
Length 1
number
0: No connection failure occurred on the RTCH channel 1: A 48.058 CONNECTION FAILURE INDICATION message was received with a cause value of "radio link failure". This counter corresponds to the RL_FAILURE_INDICATOR field of the 48.058 PHYSICAL CONTEXT CONFIRM message. External comment:
--
Edition: 13 Released
Page 275
Evolium
T23
Observation Name PERC_INCOR_SACCH_FRAMES_REC Observation Indicates the percentage of SACCH frames that could not be decoded.
Length 1
This counter corresponds to the CNT_SA_BFI_RX/CNT_SA_RX field of the 48.058 PHYSICAL CONTEXT CONFIRM message. External comment:
--
T24
Observation Name PERC_INCOR_SDCCH_FRAMES_REC Observation Indicates the percentage of SDCCH frames that could not be decoded.
Length 1
This counter corresponds to the CNT_SD_BFI_RX/CNT_SD_RX field of the 48.058 PHYSICAL CONTEXT CONFIRM message. External comment:
--
T25
Observation Name SAMPLE_RATE Observation Indicates the sample rate value at the time the observation is collected. External comment:
--
Length 1
number
Edition: 13 Released
Page 276
Type number: Type name: Type scope (per BSS): Candidate for Standard BSC Yes
A interface measurements
Counter - 18
Evolium
Type limitations (per BSS): - In Standard usage: none - In Detailed usage : none
Type definition: Set of counters related to the different causes of 08.08CLEAR REQUEST and 08.08ASSIGNMENT FAILURE
C180a
Counter Name : NB_N7_CLEAR_REQ_RadioIntMessFail SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object BSC BSC Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of 48.008CLEAR REQUEST (cause="radio interface message failure") sent to the MSC. Trigger condition: Whenever a 48.008 CLEAR REQUEST message with a cause value of "radio interface message failure" is sent on A interface to the MSC. External comment:
--
Edition: 13 Released
Page 277
C180b
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of 48.008CLEAR REQUEST (cause="O&M intervention") sent to the MSC. Trigger condition: Whenever a 48.008 CLEAR REQUEST message with a cause value of "O&M intervention" is sent on A interface to the MSC. External comment:
--
C180c
Counter Name : NB_N7_CLEAR_REQ_EquipFail SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object BSC BSC Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of 48.008CLEAR REQUEST (cause="equipment failure") sent to the MSC. Trigger condition: Whenever a 48.008 CLEAR REQUEST message with a cause value of "equipment failure" is sent on A interface to the MSC. External comment:
--
Edition: 13 Released
Page 278
C180d
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of 48.008CLEAR REQUEST (cause="radio interface failure") sent to the MSC. Trigger condition: Whenever a 48.008 CLEAR REQUEST message with a cause value of "radio interface failure" is sent on A interface to the MSC. External comment:
--
C180e
Counter Name : NB_N7_CLEAR_REQ_NoRadioResAvail SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object BSC BSC Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of 48.008CLEAR REQUEST (cause="no radio resource available") sent to the MSC. Trigger condition: Whenever a 48.008 CLEAR REQUEST message with a cause value of "no radio resource available" is sent on A interface to the MSC. External comment:
--
Edition: 13 Released
Page 279
C181a
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of 48.008ASSIGNMENT FAILURE (cause="radio interface message failure") sent to the MSC. Trigger condition: Whenever a 48.008 ASSIGNMENT FAILURE message with a cause value of "radio interface message failure" is sent on A interface to the MSC. External comment:
--
C181b
Counter Name : NB_N7_ASS_FAIL_O&Minterv SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object BSC BSC Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of 48.008ASSIGNMENT FAILURE (cause="O&M intervention") sent to the MSC. Trigger condition: Whenever a 48.008 ASSIGNMENT FAILURE message with a cause value of "O&M intervention" is sent on A interface to the MSC. External comment:
--
Edition: 13 Released
Page 280
C181c
Counter Name : NB_N7_ASS_FAIL_EquipFail SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object BSC BSC Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of 48.008ASSIGNMENT FAILURE (cause="equipment failure") sent to the MSC. Trigger condition: Whenever a 48.008 ASSIGNMENT FAILURE message with a cause value of "equipment failure" is sent on A interface to the MSC. External comment:
--
C181d
Counter Name : NB_N7_ASS_FAIL_NoRadioResAvail SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object BSC BSC Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of 48.008ASSIGNMENT FAILURE (cause="no radio resource available") sent to the MSC. Trigger condition: Whenever a 48.008 ASSIGNMENT FAILURE message with a cause value of "no radio resource available" is sent on A interface to the MSC. External comment:
--
Edition: 13 Released
Page 281
C181e
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: Number of 48.008ASSIGNMENT FAILURE (cause="requested terrestrial resource unavailable", or "terrestrial resource already allocated") sent to the MSC. Trigger condition: 1) Whenever a 48.008 ASSIGNMENT FAILURE message with a cause value of "requested terrestrial resource unavailable" is sent on A interface to the MSC. 2) Whenever a 48.008 ASSIGNMENT FAILURE message with a cause value of "terrestrial resource already allocated" is sent on A interface to the MSC.
C181f
Counter Name : NB_N7_ASS_FAIL_ReqTrans/RateUnav SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object BSC BSC Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of 48.008ASSIGNMENT FAILURE (cause="requested transcoding/rate adaptation unavailable") sent to the MSC. Trigger condition: Whenever a 48.008 ASSIGNMENT FAILURE message with a cause value of "requested transcoding/rate adaptation unavailable" is sent on A interface to the MSC. External comment:
--
Edition: 13 Released
Page 282
C181g
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of 48.008ASSIGNMENT FAILURE (cause="radio interface failure -reversion to old channel") sent to the MSC. Trigger condition: Whenever a 48.008 ASSIGNMENT FAILURE message with a cause value of "radio interface failure reversion to old channel" is sent on A interface to the MSC. External comment:
--
C181h
Counter Name : NB_N7_ASS_FAIL_RadioIntFail SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object BSC BSC Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of 48.008ASSIGNMENT FAILURE (cause="radio interface failure") sent to the MSC. Trigger condition: Whenever a 48.008 ASSIGNMENT FAILURE message with a cause value of "radio interface failure" is sent on A interface to the MSC. External comment:
--
Edition: 13 Released
Page 283
C181i
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of 48.008ASSIGNMENT FAILURE (cause="ciphering algorithm not supported") sent to the MSC. Trigger condition: Whenever a 48.008 ASSIGNMENT FAILURE message with a cause value of "cipher algorithm not supported" is sent on A interface to the MSC. External comment:
--
C181j
Counter Name : NB_N7_ASS_FAIL_BSSnotEquip SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object BSC BSC Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of 48.008ASSIGNMENT FAILURE (cause="BSS not equiped") sent to the MSC. Trigger condition: Whenever a 48.008 ASSIGNMENT FAILURE message with a cause value of "BSS not equiped" is sent on A interface to the MSC. External comment:
--
Edition: 13 Released
Page 284
C181k
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of 48.008ASSIGNMENT FAILURE (cause="protocol error between BSC and MSC") sent to the Trigger condition: Whenever a 48.008 ASSIGNMENT FAILURE message with a cause value of "protocol error between BSC and MSC" is sent on A interface to the MSC. External comment:
--
C181l
Counter Name : NB_N7_ASS_FAIL_ReqSpeechVersUnav SFD reference : 3BK 10204 0238 DSZZA ("Support of Enhanced Full Rate Mobiles") Data collection Cumulative
Release B8 B9 Measured object BSC BSC Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: Number of 48.008ASSIGNMENT FAILURE (cause="requested speech version unavailable") sent to the Trigger condition: Whenever a 48.008 ASSIGNMENT FAILURE message with a cause value of "requested speech version unavailable" is sent on A interface to the MSC. External comment:
--
Edition: 13 Released
Page 285
C182
Counter Name : NB_N7_CLEAR_REQ_EST_PHAS SFD reference : RFD 3BKA55CBR051535 Data collection Cumulative
Release B8 B9 Measured object BSC BSC Package 0 1
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: Number of 48.008 CLEAR REQUEST sent to the MSC for calls in TCH established phase, and for internal inter-cell and external TCH handover failures. Intra-cell handover failures are not taken into account. Trigger condition: 1) Whenever a 48.008 CLEAR REQUEST message, whatever the cause, is sent on A interface to the MSC, for a call in TCH established phase 2) Whenever a 48.008 CLEAR REQUEST message is sent on A interface to the MSC, after a Handover command is sent, during a TCH internal inter-cell HO. 3) Whenever a 48.008 CLEAR REQUEST message is sent on A interface to the MSC, after a Handover command is sent, during a TCH external HO.
Edition: 13 Released
Page 286
C750
Counter Name : TIME_A_CHANNEL_BUSY SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object A interface channel A interface channel Package 0 1
Measured unit:
Technology
GSM
External comment:
--
Domain: Traffic Load Counter definition: Time (in seconds) during which the A channel is busy. Trigger condition: The counter cumulates over the Accumulation Period, all unit times during which the A channel is busy. For each channel allocation: 1) The counter starts being incremented when the A channel is activated (see C751) 2) The counter stops being incremented when the A channel is deallocated after the reception of a 48.058 RF CHANNEL RELEASE ACKNOWLEDGE message or the expiry of timer T_RCR_ACK twice (after the sending of the 48.058 RF CHANNEL RELEASE message).
C751
Counter Name : NB_A_CHANNEL_ALLOC SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object A interface channel A interface channel Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of allocations of the A-channel. Trigger condition: 1) Whenever a A channel is allocated following the reception of 48.008 ASSIGNMENT REQUEST. 2) Whenever a A channel is allocated following the reception of 48.008 HANDOVER REQUEST 3) Whenever a A channel is allocated during an internal handover procedure External comment:
--
Edition: 13 Released
Page 287
Type number: Type name: Type scope (per BSS): Candidate for Standard
Type limitations (per BSS): - In Standard usage: none - In Detailed usage : The union of all observed cells per BSS for the detailed measurement types 1, 2, 3, 4, 5, 6, 19, 26, 28 (if used as Detailed), 29 (if used as Detailed), 31 (if used as detailed), 34 (if used as Detailed) must not exceed 40 cells. Type definition: Set of counters related to the Short Message Service Point to Point. The SMS transactions on SDCCH and SACCH channels, originating or terminating, are counted.
SMS PP measurements
Counter - 19
Evolium
C190
Counter Name : NB_SMS_PP_CON_MO_SDCCH SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of Mobile Originating SMS connections on SDCCH. Trigger condition: Whenever an 48.058 ESTABLISH INDICATION (SAPI = 3) message related to an SDCCH sub-channel is received by the BSC. External comment:
--
Sub domain-1: Short Message Service Sub domain-2: Point to Point Sub domain-3: Success
Edition: 13 Released
Page 288
C191
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of Mobile Terminating SMS connections on SDCCH. Trigger condition: Whenever an ESTABLISH CONFIRM (SAPI = 3) message related to an SDCCH sub-channel is received by the BSC. External comment:
--
Sub domain-1: Short Message Service Sub domain-2: Point to Point Sub domain-3: Success
C192
Counter Name : NB_SMS_PP_CON_MO_SACCH SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of Mobile Originating SMS connections on SACCH. Trigger condition: Whenever an 48.058 ESTABLISH INDICATION (SAPI = 3) message related to an SACCH sub-channel is received by the BSC. External comment:
--
Sub domain-1: Short Message Service Sub domain-2: Point to Point Sub domain-3: Success
Edition: 13 Released
Page 289
C193
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of Mobile Terminating SMS connections on SACCH. Trigger condition: Whenever an ESTABLISH CONFIRM (SAPI = 3) message related to an SACCH sub-channel is received by the BSC. External comment:
--
Sub domain-1: Short Message Service Sub domain-2: Point to Point Sub domain-3: Success
C194a
Counter Name : NB_SMS_PP_CON_REJ_RadioIntFail SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of SMS connection rejections by the BSC with the cause "radio interface failure". Trigger condition: Whenever a 48.008 SAPI "n" REJECT message related to SAPI 3 is sent from BSC to MSC with a cause value of "radio interface failure". External comment:
--
Sub domain-1: Short Message Service Sub domain-2: Point to Point Sub domain-3: Failure
Edition: 13 Released
Page 290
C194b
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of SMS connection rejections by the BSC with the cause "BSS not equipped", Trigger condition: Whenever a 48.008 SAPI "n" REJECT message related to SAPI 3 with a cause value of "BSS not equipped" is sent on A interface from BSC to MSC. External comment:
--
Sub domain-1: Short Message Service Sub domain-2: Point to Point Sub domain-3: Failure
C194c
Counter Name : NB_SMS_PP_CON_REJ_ProtocolError SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of SMS connection rejections by the BSC with the cause "protocol error between BSC and MSC". Trigger condition: Whenever a 48.008 SAPI "n" REJECT message related to SAPI 3 with a cause value of "protocol error between BSC and MSC" is sent on A interface from BSC to MSC. External comment:
--
Sub domain-1: Short Message Service Sub domain-2: Point to Point Sub domain-3: Failure
Edition: 13 Released
Page 291
C195
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: Number of SMS connection releases of established SMS SAPI 3 connections by the BSC due to a LAPDm error. Trigger condition: Whenever an 48.058 ERROR INDICATION message related to SAPI 3 is received by the BSC with one of the following cause values : -"timer T200 expired (N200+1) times" -"unsolicited DM response, multiple frame established state" -"sequence error".
Sub domain-1: Short Message Service Sub domain-2: Point to Point Sub domain-3: Failure
Edition: 13 Released
Page 292
Type number: Type name: Type scope (per BSS): Candidate for Standard BSC Yes
SCCP measurements
Counter - 25
Evolium
Type limitations (per BSS): - In Standard usage: none - In Detailed usage: none
Type definition: Set of counters related to the SCCP layer of the N7 Signalling Links
C153a
Counter Name : NB_N7_CON_EST_FAIL_DUE_NSS SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: Number of BSS originating SCCP connection failures due to the NSS. Trigger condition: 1) CREF received. 2) RLSD received for a connection that was not established (this could indicate that the Connection Confirm from the MSC was not received). External comment:
--
Edition: 13 Released
Page 293
C153b
Counter Name : NB_N7_CON_EST_FAIL_DUE_BSS SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: Number of BSS originating SCCP connection failures due to the BSS. Trigger condition: N_DISC_REQ received from BSSAP for a connection that was not yet established. External comment:
--
C251
Counter Name : NB_N7_UNIT_DATA_SENT SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of connectionless Unit Data messages class 0 sent to the MSC. Trigger condition: Whenever a UNIT DATA message (with protocol class parameter equal to 0) is sent from the BSC to the External comment:
--
Edition: 13 Released
Page 294
C252
Counter Name : NB_N7_UNIT_DATA_REC SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of connectionless Unit Data messages class 0 received from the MSC. Trigger condition: Whenever a UNIT DATA message (with protocol class parameter equal to 0) is received from the MSC. External comment:
--
C253
Counter Name : NB_N7_CON_REQ_SENT SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of CONNECTION REQUEST sent to the MSC. Trigger condition: Whenever a CONNECTION REQUEST message is sent on A interface from the BSC to the MSC. External comment:
--
Edition: 13 Released
Page 295
C254
Counter Name : NB_N7_CON_REQ_REC SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of CONNECTION REQUEST received from the MSC. Trigger condition: Whenever a CONNECTION REQUEST message is received on A interface from the MSC. External comment:
--
C255
Counter Name : NB_N7_CON_CONF_SENT SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of CONNECTION CONFIRM sent to the MSC. Trigger condition: Whenever a CONNECTION CONFIRM message is sent on A interface from the BSC to the MSC. External comment:
--
Edition: 13 Released
Page 296
C256
Counter Name : NB_N7_CON_CONF_REC SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of CONNECTION CONFIRM received from the MSC. Trigger condition: Whenever a CONNECTION CONFIRM message is received on A interface from the MSC. External comment:
--
C257
Counter Name : NB_N7_CON_REF_SENT SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of CONNECTION REFUSED sent to the MSC. Trigger condition: Whenever a CONNECTION REFUSED message is sent on A interface from the BSC to the MSC. External comment:
--
Edition: 13 Released
Page 297
C258
Counter Name : NB_N7_CON_REF_REC SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of CONNECTION REFUSED received from the MSC. Trigger condition: Whenever a CONNECTION REFUSED message is received on A interface from the MSC. External comment:
--
Edition: 13 Released
Page 298
Type number: Type name: TCH Type scope (per BSS): Candidate for Standard
Counter - 26
Evolium
Type limitations (per BSS): 1) Up to 40 serving cells can be selected per BSC. 2) These counters are provided for external handover. 3) The PM counters of Type 26 only report a PM measurement on an adjacency link on which at least an handover took place. Type definition: Set of counters related to outgoing TCH handover provided per adjacency.
C720
Counter Name : NB_ADJ_SCELL_OUT_TCH_HO_ATPT SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Adjacency Adjacency-CGI Package 0 1
Technology
GSM
Domain: Adjacency Counter definition: Number of outgoing external and internal inter-cell TCH (in HR or FR usage) handover attempts. Note that for outgoing external handover, the "Cell Identifier" OIE is not always provided, so the counter is incremented only if this field is provided. Trigger condition: Whenever 44.018HANDOVER COMMAND is sent to the MS via the fixed serving cell for an external or internal inter-cell TCH handover towards the variable target cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 299
C721
Counter Name : NB_ADJ_SCELL_OUT_TCH_HO_SUCC SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Adjacency Adjacency-CGI Package 0 1
Technology
GSM
Domain: Adjacency Counter definition: Number of outgoing external and internal inter-cell TCH (in HR or FR usage) handover successes. Trigger condition: 1) Internal handover: whenever 44.018 HANDOVER_COMPLETE message is received on Abis interface from the variable target cell during an internal inter-cell TCH handover attempted from the fixed serving cell. 2) External handover : whenever 48.008 CLEAR COMMAND (cause= "handover successful") is received at the serving BSC from the MSC during an external handover from the fixed serving cell to the 2G target cell. External comment:
--
Edition: 13 Released
Page 300
C722
Counter Name : NB_ADJ_SCELL_OUT_TCH_HO_EXEC_FAIL_REV SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Adjacency Adjacency-CGI Package 0 1
Technology
GSM
Domain: Adjacency Counter definition: Number of outgoing external and internal inter-cell TCH (in HR or FR usage) handover -execution failures due to MS access problem with reversion of the mobile to the old channel. Trigger condition: Whenever a 44.018 HANDOVER FAILURE message is received on Abis interface from the fixed serving cell during an external or internal inter-cell TCH handover attempted towards the variable 2G target cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 301
C723
Counter Name : NB_ADJ_SCELL_OUT_TCH_HO_EXEC_FAIL_NO_R SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Adjacency Adjacency-CGI Package 0 1
Technology
GSM
Domain: Adjacency Counter definition: Number of outgoing external and internal inter-cell TCH (in HR or FR usage) handover -execution failures due to MS access problem, without reversion of the mobile to the old channel. Trigger condition: 1) Internal handover: whenever the timer supervising the internal inter-cell TCH handover procedure (T3103) from the fixed serving cell to the variable target cell expires 2) External handover : whenever the timer supervising the external TCH handover procedure (T8) from the fixed serving cell to the variable target cell expires. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 302
C724
Counter Name : NB_ADJ_SCELL_OUT_TCH_HO_EMERGENCY_ATP SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Adjacency Adjacency-CGI Package 0 1
Measured unit:
Technology
GSM
Domain: Adjacency Counter definition: Number of outgoing external and internal inter-cell TCH (in HR or FR usage) handover attempts with emergency cause. Trigger condition: Inter-cell HO, External HO : Whenever a 44.018 HANDOVER COMMAND is sent to the MS via the serving cell, for an outgoing handover cause 2, 3, 4, 5, 6, 7, 17, 18, 22 on a TCH channel, from the fixed serving cell to the variable target cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 303
C725
Counter Name : NB_ADJ_SCELL_OUT_TCH_HO_BETTERCELL_AT SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Adjacency Adjacency-CGI Package 0 1
Measured unit:
Technology
GSM
Domain: Adjacency Counter definition: Number of outgoing external and internal inter-cell TCH (in HR or FR usage) handover attempts with better cell cause. Trigger condition: Inter-cell HO, External HO : Whenever a 44.018 HANDOVER COMMAND is sent to the MS via the serving cell, for an outgoing handover cause 12, 14, 21 on a TCH channel, from the fixed serving cell to the variable target cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 304
C727
Counter Name : NB_ADJ_SCELL_OUT_TCH_HO_TRAFFIC_ATPT SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Adjacency Adjacency-CGI Package 0 1
Measured unit:
Technology
GSM
Domain: Adjacency Counter definition: Number of outgoing external and internal inter-cell TCH (in HR or FR usage) handover attempts with traffic cause. Trigger condition: Inter-cell HO, External HO : Whenever a 44.018 HANDOVER COMMAND is sent to the MS via the serving cell, for an outgoing handover cause 23,24, 28 on a TCH channel, from the fixed serving cell to the variable target cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 305
C728
Counter Name : NB_ADJ_SCELL_OUT_ FORCED_DR_ATPT SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Adjacency Adjacency-CGI Package 0 1
Measured unit:
Technology
GSM
Domain: Adjacency Counter definition: Number of outgoing (external or internal) inter-cell directed retries attempts with Forced directed retry Trigger condition: Whenever a 44.018 HANDOVER COMMAND message is sent to the MS for an outgoing (external or internal) inter-cell directed retry Cause 20 from the serving cell to a given target cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN directed retry events.
Edition: 13 Released
Page 306
Type number: Type name: Type scope (per BSS): Candidate for Standard One target cell No
Counter - 27
Evolium
Type limitations (per BSS): 1) Only one target cell can be selected per BSS 2) In B5 : the counters are not provided for external handover (this is done in B62) Type definition: Set of counters related to incoming TCH handover provided per adjacency. Only handovers from 2G cells are taken into account (i.e. handovers from 3G are not counted in type 27).
C730
Counter Name : NB_ADJ_TCELL_INC_TCH_HO_ATPT SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Adjacency Adjacency-CGI Package 0 1
Technology
GSM
Domain: Adjacency Counter definition: Number of incoming 2G to 2G external and internal inter-cell TCH (in HR or FR usage) handover attempts. Trigger condition: 1) Internal handover : whenever 44.018HANDOVER COMMAND is sent to the MS via the variable serving cell for an internal inter-cell TCH handover towards the fixed target cell. 2) External handover : whenever 48.008HANDOVER REQUEST ACK is sent to the MSC from the target BSC for an external TCH handover from the variable 2G serving cell towards the fixed target cell. The Cell-identity of the serving and target cells is provided in the 48.008HANDOVER REQUEST. Only handovers from a 2G cell shall be taken into account (if the field Cell Identifier discriminator in the I.E. Cell Identifier (serving) of the 48.008 HANDOVER REQUEST is set to 0000 or 0001). External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 307
C731
Counter Name : NB_ADJ_TCELL_INC_TCH_HO_SUCC SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Adjacency Adjacency-CGI Package 0 1
Technology
GSM
Domain: Adjacency Counter definition: Number of incoming 2G to 2G external and internal inter-cell TCH (in HR or FR usage) handover Trigger condition: 1) Whenever a 44.018 HANDOVER COMPLETE message is received on Abis interface from the fixed target cell during an external or internal inter-cell TCH handover attempted from the variable serving cell. Only handovers from a 2G cell shall be taken into account (if the field Cell Identifier discriminator in the I.E. Cell Identifier (serving) of the 48.008 HANDOVER REQUEST is set to 0000 or 0001). External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 308
C733
Counter Name : NB_ADJ_TCELL_INC_TCH_HO_EXEC_FAIL_MS_AC SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Adjacency Adjacency-CGI Package 0 1
Technology
GSM
Domain: Adjacency Counter definition: Number of incoming 2G to 2G external and internal inter-cell TCH (in HR or FR usage) handover -execution failures due to MS access problem, with or without reversion of the mobile to the old channel. Trigger condition: 1) Internal handover : - 44.018HANDOVER FAILURE (cause= "radio interface failure, reversion to old channel") received from the variable serving cell during an internal inter-cell TCH handover towards the fixed target cell. - T3103 expiry 2) External handover : - 48.058CONNECTION FAILURE INDICATION (cause= "handover access failure") received on the new channel from the fixed target cell - 48.008CLEAR COMMAND (cause= "radio interface failure, reversion to old channel") received on the target BSC. Only handovers from a 2G cell shall be taken into account (if the field Cell Identifier discriminator in the I.E. Cell Identifier (serving) of the 48.008 HANDOVER REQUEST is set to 0000 or 0001). External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 309
C734
Counter Name : NB_ADJ_TCELL_INC_TCH_HO_EMERGENCY_ATP SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Adjacency Adjacency-CGI Package 0 1
Measured unit:
Technology
GSM
Domain: Adjacency Counter definition: Number of incoming 2G to 2G external and internal inter-cell TCH (in HR or FR usage) handover attempts, with emergency cause. Trigger condition: 1) Internal inter-cell handover : whenever 44.018HANDOVER COMMAND is sent to the MS via the variable serving cell for an internal inter-cell TCH handover towards the fixed target cell, with cause 2, 3, 4, 5, 6, 7, 17, 18, 22 2) External handover : whenever 48.008HANDOVER REQUEST ACK is sent to the MSC from the target BSC for an external TCH handover from the variable serving cell towards the fixed target cell. The Cell-identity of the serving and target cells is provided in the 48.008HANDOVER REQUEST with 48.008 cause 2, 3, 4, 5, 6 Only handovers from a 2G cell shall be taken into account (if the field Cell Identifier discriminator in the I.E. Cell Identifier (serving) of the 48.008 HANDOVER REQUEST is set to 0000 or 0001). External comment:
--
Edition: 13 Released
Page 310
C735
Counter Name : NB_ADJ_TCELL_INC_TCH_HO_BETTERCELL_ATP SFD reference : 3BK 10204 0478 DTZZA ("Tandem Free Operation") Data collection Cumulative
Release B8 B9 Measured object Adjacency Adjacency-CGI Package 0 1
Measured unit:
Technology
GSM
Domain: Adjacency Counter definition: Number of incoming 2G to 2G external and internal inter-cell TCH (in HR or FR usage) handover attempts, with better cell cause. Trigger condition: 1) Internal intercell handover : whenever 44.018HANDOVER COMMAND is sent to the MS via the variable serving cell for an internal inter-cell TCH handover towards the fixed target cell, with cause 12, 14, 21 2) External handover : whenever 48.008HANDOVER REQUEST ACK is sent to the MSC from the target BSC for an external TCH handover from the variable serving cell towards the fixed target cell. The Cell-identity of the serving and target cells is provided in the 48.008HANDOVER REQUEST with 48.008 cause 12 Only handovers from a 2G cell shall be taken into account (if the field Cell Identifier discriminator in the I.E. Cell Identifier (serving) of the 48.008 HANDOVER REQUEST is set to 0000 or 0001). External comment:
--
Edition: 13 Released
Page 311
C737
Counter Name : NB_ADJ_TCELL_INC_TCH_HO_TRAFFIC_ATPT SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Adjacency Adjacency-CGI Package 0 1
Measured unit:
Technology
GSM
Domain: Adjacency Counter definition: Number of incoming 2G to 2G external and internal inter-cell TCH (in HR or FR usage) handover attempts, with traffic cause. Trigger condition: 1) Internal handover : whenever 44.018HANDOVER COMMAND is sent to the MS via the variable serving cell for an internal inter-cell TCH handover towards the fixed target cell, with cause 23, 24, 28 2) External handover : whenever 48.008HANDOVER REQUEST ACK is sent to the MSC from the target BSC for an external TCH handover from the variable serving cell towards the fixed target cell. The Cell-identity of the serving and target cells is provided in the 48.008HANDOVER REQUEST with 48.008 cause 15. Only handovers from a 2G cell shall be taken into account (if the field Cell Identifier discriminator in the I.E. Cell Identifier (serving) of the 48.008 HANDOVER REQUEST is set to 0000 or 0001). External comment:
--
Edition: 13 Released
Page 312
C738
Counter Name : NB_ADJ_TCELL_INC_FORCED_DR_ATPT SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Adjacency Adjacency-CGI Package 0 1
Measured unit:
Technology
GSM
Domain: Adjacency Counter definition: Number of incoming 2G to 2G external and internal inter-cell directed retries attempts, with Forced directed retry cause. Trigger condition: 1) Internal handover : whenever 44.018HANDOVER COMMAND is sent to the MS via the variable serving cell for an internal inter-cell TCH handover towards the fixed target cell, with cause 20 2) External handover : whenever 48.008HANDOVER REQUEST ACK is sent to the MSC from the target BSC for an external TCH handover from the variable serving cell towards the fixed target cell. The Cell-identity of the serving and target cells is provided in the 48.008HANDOVER REQUEST with 48.008 cause 13. Only handovers from a 2G cell shall be taken into account (if the field Cell Identifier discriminator in the I.E. Cell Identifier (serving) of the 48.008 HANDOVER REQUEST is set to 0000 or 0001). External comment:
--
Edition: 13 Released
Page 313
C753
Counter Name : NB_ADJ_TCELL_INC_TCH_HO_OTHER_ATPT SFD reference : 3BK 10204 0478 DTZZA ("Tandem Free Operation") Data collection Cumulative
Release B8 B9 Measured object Adjacency Adjacency-CGI Package 0 1
Measured unit:
Technology
GSM
Domain: Adjacency Counter definition: Number of incoming 2G to 2G external and internal inter-cell TCH (in HR or FR usage) handover attempts, with unknown or missing cause. Trigger condition: 1) Internal handover : whenever 44.018HANDOVER COMMAND is sent to the MS via the variable serving cell for an internal inter-cell TCH handover towards the fixed target cell, with unknown or missing cause. 2) External handover : whenever 48.008HANDOVER REQUEST ACK is sent to the MSC from the target BSC for an external TCH handover from the variable serving cell towards the fixed target cell. The Cell-identity of the serving and target cells is provided in the 48.008HANDOVER REQUEST with unknown or missing 48.008 cause, or 48.008 cause different from 2, 3, 4, 5, 6, 12, 13, 15. Only handovers from a 2G cell shall be taken into account (if the field Cell Identifier discriminator in the I.E. Cell Identifier (serving) of the 48.008 HANDOVER REQUEST is set to 0000 or 0001). External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 314
Type number: Type name: Type scope (per BSS): Candidate for Standard
Type limitations (per BSS): - In Standard usage: none - In Detailed usage :The union of all observed cells per BSS for the detailed measurement types 1, 2, 3, 4, 5, 6, 19 (if used as Detailed), 26, 28, 29 (if used as Detailed), 31 (if used as detailed), 34 (if used as Detailed) must not exceed 40 cells. Type definition: Set of counters related to SDCCH handover procedure.The counters are provided per handover category : incoming and outgoing, internal (inter-cell and intra-cell) and external. The handover causes are also provided.
SDCCH handover
Counter - 28
Evolium
C100
Counter Name : NB_OUT_INT_SDCCH_HO_ATPT SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing internal inter-cell SDCCH handover attempts. Trigger condition: Whenever the 44.018 HANDOVER COMMAND message is sent on Abis interface to the mobile via the serving cell, during an internal inter-cell SDCCH handover procedure. External comment:
--
Edition: 13 Released
Page 315
C101
Measured unit:
Technology
GSM
Domain: Handover Counter definition: MC101=C101, Number of intra-cell SDCCH handover -preparation failures due to congestion. Trigger condition: Whenever a internal intra-cell SDCCH handover cannot be performed, because there is no free SDCCH Sub-channel to allocate the handover to. External comment:
--
C102
Counter Name : NB_INTRA_SDCCH_HO_SUCC SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of intra-cell SDCCH handover successes. Trigger condition: Whenever a ASSIGNEMENT COMPLETE message is received on the target channel during an internal intra-cell SDCCH handover. External comment:
--
Edition: 13 Released
Page 316
C103
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of intra-cell SDCCH handover -execution failures due to MS access problem without reversion to the old channel. Trigger condition: Whenever the timer supervising the internal intra-cell SDCCH handover procedure (T3107) expires. External comment:
--
C107
Counter Name : NB_INTRA_SDCCH_HO_EXEC_FAIL_REV SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of intra-cell SDCCH handover -execution failures due to MS access problem with reversion to the old channel. Trigger condition: Whenever a 44.018 ASSIGNMENT FAILURE message is received on the Serving Sub-channel, during an internal intra-cell SDCCH handover. External comment:
--
Edition: 13 Released
Page 317
C115
Counter Name : NB_SDCCH_HO_MSC_TRIG SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of external handovers triggered by the MSC but not required by the BSS. Trigger condition: Whenever a 48.008 HANDOVER COMMAND message is received on A interface from the MSC and timer T_HO_REQ_LOST is not running. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
C310
Counter Name : NB_INC_EXT_SDCCH_HO_REQ SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of incoming external SDCCH handover requests. Trigger condition: 48.008HANDOVER REQUEST is received by the target BSC for the target cell on the SDCCH channel. Note: This counter counts both inter-PLMN and intra-PLMN handover events. External comment:
--
Edition: 13 Released
Page 318
C311
Counter Name : NB_INC_EXT_SDCCH_HO_ATPT SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of incoming external SDCCH handover attempts. Trigger condition: 48.008HANDOVER REQUEST ACK is sent by the target BSC containing the 44.018HANDOVER COMMAND towards the target cell on the SDCCH channel. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
C330
Counter Name : NB_INC_INT_SDCCH_HO_REQ SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of incoming internal inter-cell SDCCH handover requests. Trigger condition: Whenever the BSC process responsible for the handover procedure selects a target cell (among a list of target cells) for internal inter cell SDCCH handover. External comment:
--
Edition: 13 Released
Page 319
C331
Counter Name : NB_INC_INT_SDCCH_HO_ATPT SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of incoming internal inter-cell SDCCH handover attempts. Trigger condition: 44.018HANDOVER COMMAND is sent to the MS via the serving cell for internal inter cell SDCCH handover. However, the counter is incremented in the TARGET cell, based on the target cell ID indicated by the HO Command message, External comment:
--
C360
Counter Name : NB_INTRA_SDCCH_HO_REQ SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of intra-cell SDCCH handover requests. Trigger condition: Whenever the BSC process responsible for the handover procedure starts an intra cell SDCCH handover procedure. External comment:
--
Edition: 13 Released
Page 320
C361
Counter Name : NB_INTRA_SDCCH_HO_ATPT SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of intra-cell SDCCH handover attempts. Trigger condition: 44.018ASSIGNMENT COMMAND is sent to the MS via the cell for intra cell handover on SDCCH. External comment:
--
C445
Counter Name : NB_SDCCH_HO_ATPT_23_TrafHandover SFD reference : 3BK 10204 0326 DSZZA ("Traffic Management in HO Algorithms") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of inter-cell internal or external handover attempts, with the cause 23: "traffic handover" on SDCCH. This counter counts also the directed retries. Trigger condition: Whenever 44.018HANDOVER COMMAND is sent to the MS via the BTS because of cause 23 on SDCCH. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 321
C446
Counter Name : NB_SDCCH_HO_ATPT_24_GenCaptureHandover SFD reference : 3BK 10204 0326 DSZZA ("Traffic Management in HO Algorithms") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of inter-cell internal or external handover attempts, with the cause 24: "general capture handover" on SDCCH. This counter counts also the directed retries. Trigger condition: Whenever 44.018HANDOVER COMMAND is sent to the MS via the BTS because of cause 24 on SDCCH. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 322
C454
Counter Name : NB_SDCCH_HO_ATPT_22_TooShortDistance SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of SDCCH inter-cell internal or external handover attempts with cause 22: "too short MS-BTS distance". This cause is restricted to the extended cells.This counter counts also the directed retries. Trigger condition: Whenever 44.018 HANDOVER COMMAND is sent to the mobile via the BTS because of cause 22 on SDCCH. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
C510
Counter Name : NB_SDCCH_HO_ATPT_2_TooLowQualUp SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of SDCCH inter-cell internal or external handover attempts triggered with cause 2: "uplink quality too low". Trigger condition: Whenever 44.018HANDOVER COMMAND is sent to the MS via the BTS because of cause 2. This counter is incremented in the serving cell. External comment:
--
Edition: 13 Released
Page 323
C511
Counter Name : NB_SDCCH_HO_ATPT_3_TooLowLevUp SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of SDCCH inter-cell internal or external handover attempts with cause 3: "uplink level too low". Trigger condition: Whenever 44.018HANDOVER COMMAND is sent to the MS via the BTS because of cause 3. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
C512
Counter Name : NB_SDCCH_HO_ATPT_4_TooLowQualDown SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of SDCCH inter-cell internal or external handover attempts with cause 4: "downlink quality too low". Trigger condition: Whenever 44.018HANDOVER COMMAND is sent to the MS via the BTS because of cause 4. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 324
C513
Counter Name : NB_SDCCH_HO_ATPT_5_TooLowLevDown SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of SDCCH inter-cell internal or external handover attempts triggered with cause 5: "downlink level too low". Trigger condition: Whenever 44.018HANDOVER COMMAND is sent to the MS via the BTS because of cause 5. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 325
C514
Counter Name : NB_SDCCH_HO_ATPT_6_TooLongDistance SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of SDCCH inter-cell internal or external handover attempts with cause 6: "MS-BTS distance too Trigger condition: Whenever 44.018HANDOVER COMMAND is sent to the MS via the BTS because of cause 6. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
C516
Counter Name : NB_SDCCH_HO_ATPT_15_TooHighLevInterfUp SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of SDCCH intra-cell handover attempts with cause 15: "too high level interference on uplink". Trigger condition: Whenever 44.018ASSIGNMENT COMMAND is sent to the MS via the BTS because of cause 15. External comment:
--
Edition: 13 Released
Page 326
C517
Counter Name : NB_SDCCH_HO_ATPT_16_TooHighLevInterfDown SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of SDCCH intra-cell handover attempts with cause 16: "too high level interference on downlink". Trigger condition: Whenever 44.018ASSIGNMENT COMMAND is sent to the MS via the BTS because of cause 16. External comment:
--
C518
Counter Name : NB_SDCCH_HO_ATPT_12_TooLowPowBudg SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of SDCCH inter-cell internal or external handover attempts with cause 12: "too low power budget". Trigger condition: Whenever 44.018 HANDOVER COMMAND is sent to the MS via the BTS because of cause 12. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 327
C519
Counter Name : NB_SDCCH_HO_ATPT_21_HighLevNeigCellPrefBa SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of SDCCH inter-cell internal or external handover attempts with cause 21: "high level in neighbour cell in the preferred band". This counter is related to multiband. Trigger condition: Whenever 44.018HANDOVER COMMAND is sent to the MS via the BTS because of cause 21. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 328
C605a
Counter Name : NB_SDCCH_HO_ATPT_7_ConsBadSACCHmicroCell SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of SDCCH inter-cell internal or external handover attempts with cause 7: "several consecutive bad SACCH frames received in a micro cell". This counter is related to micro cell environment. Trigger condition: Whenever 44.018HANDOVER COMMAND is sent to the MS via the BTS because of cause 7. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 329
C605d
Counter Name : NB_SDCCH_HO_ATPT_17_TooLowLevUpMicroCell SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of SDCCH inter-cell internal or external handover attempts with cause 17 "too low level on the uplink in a microcell compared to a high threshold". This counter is related to micro cell environment. Trigger condition: Whenever 44.018HANDOVER COMMAND is sent to the MS via the BTS because of cause 17. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 330
C605e
Counter Name : NB_SDCCH_HO_ATPT_18_TooLowLevDownMicroC SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of SDCCH inter-cell internal or external handover attempts with cause 18: "too low level on the downlink in a microcell compared to a high threshold". This counter is related to micro cell environment. Trigger condition: Whenever 44.018HANDOVER COMMAND is sent to the MS via the BTS because of cause 18. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 331
C605f
Counter Name : NB_SDCCH_HO_ATPT_14_HighLevNeigLowCellSlo SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of SDCCH inter-cell internal or external handover attempts with cause 14: "high level in neighbour lower layer cell for slow mobile". This counter is related to micro cell environment. Trigger condition: Whenever 44.018 HANDOVER COMMAND is sent to the MS via the BTS because of cause 14. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 332
C607
Counter Name : NB_SDCCH_HO_ATPT_20_HighLevNeigCellForcDR SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of SDCCH inter-cell internal or external handover attempts with cause 20: "forced directed retry". This counter is related to a forced directed retry (internal or external). Trigger condition: Whenever 44.018 HANDOVER COMMAND is sent to the MS via the BTS because of cause 20. This counter is incremented in the serving cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
C81
Counter Name : NB_INC_EXT_SDCCH_HO_PREP_FAIL_CONG SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: MC81=C81, Number of incoming external SDCCH handover -preparation failures due to congestion. Trigger condition: Whenever a 48.008 HANDOVER FAILURE message with a cause value of "no radio resource available" is sent on A interface from the target BSC to the MSC during an external SDCCH handover. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 333
C82
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of incoming external SDCCH handover successes. Trigger condition: Whenever a 44.018 HANDOVER COMPLETE message is received on Abis interface from the target cell for an SDCCH Sub-channel that is involved in an external SDCCH handover. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 334
C83
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of incoming external SDCCH handover -execution failures due to MS access problem. Trigger condition: 1) Whenever a 48.058 CONNECTION FAILURE INDICATION message with a cause value of "handover access failure" is received on Abis interface from the target cell, for an SDCCH Sub-channel during an external SDCCH handover. 2) Whenever the timer supervising the handover procedure on the target cell (T9113), expires during an external SDCCH handover. 3) Whenever a 48.008 CLEAR COMMAND with a cause value of "radio interface failure - reversion to old channel" is received on A interface on the target BSC from the MSC during an external SDCCH handover. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 335
C85a
Counter Name : NB_OUT_EXT_SDCCH_REAL_HO_REQ SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing external SDCCH handover requests. Trigger condition: Whenever a 48.008 HANDOVER REQUIRED message is sent on A interface to the MSC for a SDCCH handover. If more than one 48.008 HANDOVER REQUIRED is sent in the frame of the same Handover procedure, the counter is incremented only once. 48.008 HANDOVER REQUIRED is sent in following situations : 1) An external handover alarm has been raised, with corresponding list of candidate cells. 2) The list of candidate cells for the current alarm has been updated. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 336
C86
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing external SDCCH handover successes. Trigger condition: Whenever a 48.008 CLEAR COMMAND message with a cause of "handover successful" is received on A interface on the serving BSC from the MSC for an external SDCCH handover. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
C87
Counter Name : NB_OUT_EXT_SDCCH_HO_EXEC_FAIL_REV SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outoing external SDCCH handover -execution failures due to MS access problem with reversion to the old channel. Trigger condition: Whenever a HANDOVER FAILURE message is received on Abis interface from the serving cell, during an external SDCCH handover. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 337
C88
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number outoing external SDCCH handover -execution failures due to MS access problem without reversion to the old channel. Trigger condition: Whenever the timer supervising the handover procedure on the serving cell (T8), expires during an external SDCCH handover. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
C90
Counter Name : NB_OUT_EXT_SDCCH_HO_ATPT SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing external SDCCH handover attempts. Trigger condition: Whenever the 44.018 HANDOVER COMMAND message is sent on Abis interface on the serving channel, during an external SDCCH handover procedure. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 338
C91
Measured unit:
Technology
GSM
Domain: Handover Counter definition: MC91=C91, Number of incoming internal inter-cell SDCCH handover -preparation failures due to Trigger condition: Whenever a internal inter-cell SDCCH handover cannot be performed, because there is no free SDCCH Sub-channel to allocate the handover to. External comment:
--
C92
Counter Name : NB_INC_INT_SDCCH_HO_SUCC SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of incoming internal inter-cell SDCCH handover successes. Trigger condition: Whenever a 44.018 HANDOVER COMPLETE message is received on Abis interface from the target cell during an internal inter-cell SDCCH handover. External comment:
--
Edition: 13 Released
Page 339
C93
Measured unit:
Technology
GSM
External comment:
--
Domain: Handover Counter definition: Number of incoming internal inter-cell SDCCH handover -execution failures due to MS access problem. Trigger condition: 1) Whenever the timer supervising the handover procedure (T3103) expires during an internal inter-cell SDCCH handover. 2) Whenever a HANDOVER FAILURE message is received on Abis interface from the serving cell during and internal inter-cell SDCCH handover.
C95a
Counter Name : NB_OUT_INT_SDCCH_HO_REQ SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing internal inter-cell SDCCH handover requests. Trigger condition: Whenever the BSC process responsible for the handover procedure selects a target cell (among a list of target cells) for internal inter cell SDCCH handover. External comment:
--
Edition: 13 Released
Page 340
C96
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing internal inter-cell SDCCH handover successes. Trigger condition: Whenever a 44.018 HANDOVER COMPLETE message is received on Abis interface from the target cell, during an internal inter-cell SDCCH handover. External comment:
--
C97
Counter Name : NB_OUT_INT_SDCCH_HO_EXEC_FAIL_REV SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outoing internal inter-cell SDCCH handover execution failures due to MS access problem with reversion to the old channel. Trigger condition: Whenever a HANDOVER FAILURE message is received on Abis interface from the serving cell, during an internal inter-cell SDCCH handover. External comment:
--
Edition: 13 Released
Page 341
C98
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number outoing internal inter-cell SDCCH handover -execution failures due to MS access problem without reversion to the old channel. Trigger condition: Whenever the timer supervising the internal inter-cell handover procedure (T3103) expires. External comment:
--
Edition: 13 Released
Page 342
Type number: Type name: Type scope (per BSS): Candidate for Standard
Type limitations (per BSS): - In Standard usage: none - In Detailed usage :The union of all observed cells per BSS for the detailed measurement types 1, 2, 3, 4, 5, 6, 19 (if used as Detailed), 26, 28, 29 (if used as Detailed), 31 (if used as detailed), 34 (if used as Detailed) must not exceed 40 cells. Type definition: Set of counters related to the directed retry procedure. The counters are provided per directed retry category : incoming and outgoing, internal and external, forced and normal.
Counter - 29
Evolium
C142a
Counter Name : NB_OUT_FORCED_IDR_SUCC SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing forced internal directed retry (towards a TCH channel in HR or FR usage) successes. Trigger condition: Whenever 44.018HANDOVER COMPLETE is received from the MS via the target cell, for a forced internal directed retry procedure. External comment:
--
Sub domain-1: Directed Retry Sub domain-2: Internal Sub domain-3: Outgoing
Edition: 13 Released
Page 343
C142b
Counter Name : NB_OUT_FORCED_EDR_SUCC SFD reference : 3BK 10204 0165 DSZZA ("External Directed Retry") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing forced external directed retry (towards a TCH channel in HR or FR usage) successes. Trigger condition: Whenever 48.008CLEAR COMMAND (cause="handover successful") is received on the serving BSC for an external forced directed retry. External comment:
--
Sub domain-1: Directed Retry Sub domain-2: External Sub domain-3: Outgoing
Note: This counter counts both inter-PLMN and intra-PLMN directed retry events.
C142c
Counter Name : NB_OUT_NOR_IDR_SUCC SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing normal internal directed retry (towards a TCH channel in HR or FR usage) successes. Trigger condition: Whenever 44.018HANDOVER COMPLETE is received from the MS via the target cell, for a normal internal directed retry procedure. External comment:
--
Sub domain-1: Directed Retry Sub domain-2: Internal Sub domain-3: Outgoing
Edition: 13 Released
Page 344
C142d
Counter Name : NB_OUT_NOR_EDR_SUCC SFD reference : 3BK 10204 0165 DSZZA ("External Directed Retry") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing normal external directed retry (towards a TCH channel in HR or FR usage) successes. Trigger condition: Whenever 48.008 CLEAR COMMAND (cause="handover successful") is received on the serving BSC for an external normal directed retry. External comment:
--
Sub domain-1: Directed Retry Sub domain-2: External Sub domain-3: Outgoing
Note: This counter counts both inter-PLMN and intra-PLMN directed retry events.
C143a
Counter Name : NB_OUT_FORCED_IDR_EXEC_FAIL_REV SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing forced internal directed retry -execution failures due to MS access problem with reversion to the old channel. The target TCH channel can be in HR or FR usage. Trigger condition: 44.018HANDOVER FAILURE on SDCCH received from the MS via the serving cell. External comment:
--
Sub domain-1: Directed Retry Sub domain-2: Internal Sub domain-3: Outgoing
Edition: 13 Released
Page 345
C143b
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing forced internal directed retry -execution failures due to MS access problem without reversion to the old channel. The target TCH channel can be in HR or FR usage. Trigger condition: Timer T3103 expiry (this timer supervizes the 44.018HANDOVER COMMAND). External comment:
--
Sub domain-1: Directed Retry Sub domain-2: Internal Sub domain-3: Outgoing
C143c
Counter Name : NB_OUT_FORCED_EDR_EXEC_FAIL_REV SFD reference : 3BK 10204 0165 DSZZA ("External Directed Retry") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing forced external directed retry -execution failures due to MS access problem with reversion to the old channel. The target TCH channel can be in HR or FR usage. Trigger condition: Whenever 44.018 HANDOVER FAILURE is received from the MS via the serving cell on the old channel (SDCCH). External comment:
--
Sub domain-1: Directed Retry Sub domain-2: External Sub domain-3: Outgoing
Note: This counter counts both inter-PLMN and intra-PLMN directed retry events.
Edition: 13 Released
Page 346
C143d
Counter Name : NB_OUT_FORCED_EDR_EXEC_FAIL_NO_REV SFD reference : 3BK 10204 0165 DSZZA ("External Directed Retry") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing forced external directed retry -execution failures due to MS access problem without reversion to the old channel. The target TCH channel can be in HR or FR usage. Trigger condition: Whenever the timer supervising the handover procedure (T8), expires. Note: This counter counts both inter-PLMN and intra-PLMN directed retry events. External comment:
--
Sub domain-1: Directed Retry Sub domain-2: External Sub domain-3: Outgoing
C143e
Counter Name : NB_OUT_NOR_IDR_EXEC_FAIL_REV SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing normal internal directed retry -execution failures due to MS access problem with reversion to the old channel. The target TCH channel can be in HR or FR usage. Trigger condition: 44.018HANDOVER FAILURE on SDCCH received from the MS via the serving cell. External comment:
--
Sub domain-1: Directed Retry Sub domain-2: Internal Sub domain-3: Outgoing
Edition: 13 Released
Page 347
C143f
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing normal internal directed retry -execution failures due to MS access problem without reversion to the old channel. The target TCH channel can be in HR or FR usage. Trigger condition: Timer T3103 expiry (this timer supervizes the 44.018HANDOVER COMMAND). External comment:
--
Sub domain-1: Directed Retry Sub domain-2: Internal Sub domain-3: Outgoing
C143g
Counter Name : NB_OUT_NOR_EDR_EXEC_FAIL_REV SFD reference : 3BK 10204 0165 DSZZA ("External Directed Retry") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing normal external directed retry -execution failures due to MS access problem with reversion to the old channel. The target TCH channel can be in HR or FR usage. Trigger condition: Whenever 44.018 HANDOVER FAILURE is received from the MS via the serving cell on the old channel (SDCCH). External comment:
--
Sub domain-1: Directed Retry Sub domain-2: External Sub domain-3: Outgoing
Note: This counter counts both inter-PLMN and intra-PLMN directed retry events.
Edition: 13 Released
Page 348
C143h
Counter Name : NB_OUT_NOR_EDR_EXEC_FAIL_NO_REV SFD reference : 3BK 10204 0165 DSZZA ("External Directed Retry") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing normal external directed retry -execution failures due to MS access problem without reversion to the old channel. The target TCH channel can be in HR or FR usage. Trigger condition: Whenever the timer supervising the handover procedure (T8) expires. Note: This counter counts both inter-PLMN and intra-PLMN directed retry events. External comment:
--
Sub domain-1: Directed Retry Sub domain-2: External Sub domain-3: Outgoing
C144a
Counter Name : NB_OUT_FORCED_IDR_REQ SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing forced internal directed retry (towards a TCH channel in HR or FR usage) requests. Trigger condition: Whenever the BSC process responsible for handover procedure initiates a forced internal directed retry from the serving cell. External comment:
--
Sub domain-1: Directed Retry Sub domain-2: Internal Sub domain-3: Outgoing
Edition: 13 Released
Page 349
C144b
Counter Name : NB_OUT_FORCED_EDR_REQ SFD reference : 3BK 10204 0165 DSZZA ("External Directed Retry") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing forced external directed retry requests. The target TCH channel can be in HR or FR Trigger condition: Whenever the BSC process responsible for handover procedure starts a forced external directed retry from the serving cell. External comment:
--
Sub domain-1: Directed Retry Sub domain-2: External Sub domain-3: Outgoing
Note: This counter counts both inter-PLMN and intra-PLMN directed retry events.
C144c
Counter Name : NB_OUT_NOR_IDR_REQ SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing normal internal directed retry requests. The target TCH channel can be in HR or FR Trigger condition: Whenever the BSC process responsible for handover procedure initiates a normal internal directed retry from the serving cell. External comment:
--
Sub domain-1: Directed Retry Sub domain-2: Internal Sub domain-3: Outgoing
Edition: 13 Released
Page 350
C144d
Counter Name : NB_OUT_NOR_EDR_REQ SFD reference : 3BK 10204 0165 DSZZA ("External Directed Retry") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing normal external directed retry requests. The target TCH channel can be in HR or FR usage. Trigger condition: Whenever the BSC process responsible for handover procedure starts a normal external directed retry from the serving cell. External comment:
--
Sub domain-1: Directed Retry Sub domain-2: External Sub domain-3: Outgoing
Note: This counter counts both inter-PLMN and intra-PLMN directed retry events.
C145a
Counter Name : NB_OUT_FORCED_IDR_ATPT SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing forced internal directed retry attempts. The target TCH channel can be in HR or FR Trigger condition: Whenever a 44.018HANDOVER COMMAND is sent to the MS via the serving cell on the SDCCH channel for a forced internal directed retry. External comment:
--
Sub domain-1: Directed Retry Sub domain-2: Internal Sub domain-3: Outgoing
Edition: 13 Released
Page 351
C145b
Counter Name : NB_OUT_FORCED_EDR_ATPT SFD reference : 3BK 10204 0165 DSZZA ("External Directed Retry") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing forced external directed retry attempts. The target TCH channel can be in HR or FR Trigger condition: Whenever a 44.018HANDOVER COMMAND is sent to the MS via the serving cell on the SDCCH channel for a forced external directed retry. External comment:
--
Sub domain-1: Directed Retry Sub domain-2: External Sub domain-3: Outgoing
Note: This counter counts both inter-PLMN and intra-PLMN directed retry events.
C145c
Counter Name : NB_OUT_NOR_IDR_ATPT SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing normal internal directed retry attempts. The target TCH channel can be in HR or FR Trigger condition: Whenever a 44.018HANDOVER COMMAND is sent to the MS via the serving cell on the SDCCH channel for a normal internal directed retry. External comment:
--
Sub domain-1: Directed Retry Sub domain-2: Internal Sub domain-3: Outgoing
Edition: 13 Released
Page 352
C145d
Counter Name : NB_OUT_NOR_EDR_ATPT SFD reference : 3BK 10204 0165 DSZZA ("External Directed Retry") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing normal external directed retry attempts. The target TCH channel can be in HR or FR usage. Trigger condition: Whenever a 44.018HANDOVER COMMAND is sent to the MS via the serving cell on the SDCCH channel for a normal external directed retry. External comment:
--
Sub domain-1: Directed Retry Sub domain-2: External Sub domain-3: Outgoing
Note: This counter counts both inter-PLMN and intra-PLMN directed retry events.
C151
Counter Name : NB_INC_IDR_SUCC (29) SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of incoming internal directed retry (forced or normal, towards a TCH channel in HR or FR usage) successes. Trigger condition: Whenever 44.018HANDOVER COMPLETE is received from the MS via the target cell, for a forced or internal internal directed retry procedure. External comment:
--
Sub domain-1: Directed Retry Sub domain-2: Internal Sub domain-3: Incoming
Edition: 13 Released
Page 353
C152
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of incoming internal directed retry (forced or normal) -execution failures due to MS access problem. The target TCH channel can be in HR or FR usage. Trigger condition: 1) 44.018HANDOVER FAILURE on SDCCH received from the MS via the serving cell 2) timer T3103 expiry (this timer supervizes the 44.018HANDOVER COMMAND) External comment:
--
Sub domain-1: Directed Retry Sub domain-2: Internal Sub domain-3: Incoming
C153
Counter Name : NB_INC_IDR_REQ SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: MC153=C153, Number of incoming internal directed retry (forced or normal) requests. The target TCH channel can be in HR or FR usage. Trigger condition: Whenever the BSC process responsible for handover procedure selects the target cell for forced or normal internal directed retry. External comment:
--
Sub domain-1: Directed Retry Sub domain-2: Internal Sub domain-3: Incoming
Edition: 13 Released
Page 354
C154
Counter Name : NB_INC_IDR_ATPT SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of incoming internal directed retry (forced or normal) attempts. The target TCH channel can be in HR or FR usage. Trigger condition: Whenever a 44.018HANDOVER COMMAND is sent to the MS via the serving cell on the SDCCH. However, the counter is incremented in the TARGET cell, based on the target cell ID indicated by the HO Command message, External comment:
--
Sub domain-1: Directed Retry Sub domain-2: Internal Sub domain-3: Incoming
C555
Counter Name : NB_INC_IDR_PREP_FAIL_CONG_R_ABIS SFD reference : 3BK 10204 0518 DTZZA ("A bis and A ter dynamic allocation") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of incoming internal directed retry (forced or normal) -preparation failures due to congestion (on Air or A-bis interface). The target TCH channel can be in HR or FR usage. Trigger condition: 1) Whenever there are no free TCH in the target cell during a forced or normal internal directed retry. 2) Whenever no TCH resource is available on A-bis interface for a forced or normal internal directed retry. (not valid in B7) External comment:
--
Sub domain-1: Directed Retry Sub domain-2: Internal Sub domain-3: Incoming
Edition: 13 Released
Page 355
Type number: Type name: Type scope (per BSS): Candidate for Standard BSC Yes
SMS CB measurements
Counter - 30
Evolium
Type limitations (per BSS): - In Standard usage: none - In Detailed usage: none
Type definition: Set of counters related to the Short Message Service Cell Broadcast.
CB601
Counter Name : NB_SMSCB_WRITE_REPL_SUCC SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object BSC BSC Package 0 1
Measured unit:
Technology
GSM
Trigger condition: Whenever a REPORT SUCCESS to a WRITE REPLACE is sent to the CBC, the counter is incremented by the No-of-Broadcasts-completed-list optional IE (if not provided; the counter is not incremented, since it means that no cells are served). External comment:
--
Domain: Traffic Load Counter definition: Number of cells successfully served for a WRITE REPLACE. A WRITE REPLACE request coming from the CBC is received by the BSC. This request is addressed to a list of cells. The BSC is able to process the request either : - entirely (i.e. for all cells of the list) : the BSC sends a REPORT SUCCESS to the CBC - partially (i.e. for a part of the list) : the BSC returns a REPORT SUCCESS to the CBC - not at all (i.e. for no cell) : the BSC returns a REPORT FAILURE to the CBC if the cause of the reject is the same for all cells, otherwise a REPORT SUCCESS is returned. When a REPORT SUCCESS is returned, the No-of-Broadcasts-completed-list optional Information Element specifies the number of cells successfully served by the request. This IE is not provided when no cells can be served.
Sub domain-1: Telecom Procedure Sub domain-2: Short Message Service Sub domain-3: Cell Broadcast
Edition: 13 Released
Page 356
CB602
Measured unit:
Technology
GSM
Trigger condition: Whenever a REPORT SUCCESS to a KILL MESSAGE is sent to the CBC, the counter is incremented by the No-of-Broadcasts-completed-list optional IE (if not provided, the counter is not incremented, since it means that no cells are served). External comment:
--
Domain: Traffic Load Counter definition: Number of cells successfully served for a KILL MESSAGE. A KILL MESSAGE request coming from the CBC is received by the BSC. This request is addressed to a list of cells. The BSC is able to process the request either : - entirely (i.e. for all cells of the list) : the BSC sends a REPORT SUCCESS to the CBC - partially (i.e. for a part of the list) : the BSC returns a REPORT SUCCESS to the CBC - not at all (i.e. for no cell) : the BSC returns a REPORT FAILURE to the CBC if the cause of the reject is the same for all cells, otherwise a REPORT SUCCESS is returned. When a REPORT SUCCESS is returned, the No-of-Broadcasts-completed-list optional Information Element specifies the number of cells successfully served by the request. This IE is not provided when no cells can be served.
Sub domain-1: Telecom Procedure Sub domain-2: Short Message Service Sub domain-3: Cell Broadcast
Edition: 13 Released
Page 357
CB603
Counter Name : NB_SMS_CB_FAIL_IND SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object BSC BSC Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Each time a FAILURE INDICATION sent to the CBC, number of cells implicated by the failure. The BSC detects a failure and request the CBC (by the FAILURE INDICATION message) to stop the sending of messages to a list of cells. Trigger condition: Whenever a FAILURE INDICATION is sent to the CBC, the counter is incremented by the Cell-List mandatory IE. External comment:
--
Sub domain-1: Short Message Service Sub domain-2: Cell Broadcast Sub domain-3: Failure
Edition: 13 Released
Page 358
CB604
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of cells rejected for a WRITE REPLACE or KILL MESSAGE request. A WRITE REPLACE or a KILL MESSAGE request coming from the CBC is received by the BSC. This request is addressed to a list of cells. The BSC is able to process the request either : - entirely (i.e. for all cells of the list) : the BSC sends a REPORT SUCCESS to the CBC - partially (i.e. for a part of the list) : the BSC returns a REPORT SUCCESS to the CBC - not at all (i.e. for no cell) : the BSC returns a REPORT FAILURE to the CBC if the cause of the reject is the same for all cells, otherwise a REPORT SUCCESS is returned. When a REPORT SUCCESS is returned, the Failure-List optional Information Element specifies for each cell whose request has not been completed, the cause and diagnostic of the failure.
Sub domain-1: Short Message Service Sub domain-2: Cell Broadcast Sub domain-3: Failure
External comment:
--
Trigger condition: 1) Whenever a WRITE REPLACE or a KILL MESSAGE request is totally rejected by REPORT FAILURE (then, for all cells with the same cause), the counter is incremented by the Cell-List IE value provided within the request message. 2) Whenever a REPORT SUCCESS to a WRITE REPLACE or a KILL MESSAGE request is returned to the CBC, the counter is incremented by the number of cells provided within the Failure-List IE of the REPORT SUCCESS.
Edition: 13 Released
Page 359
Type number: Type name: Type scope (per BSS): Candidate for Standard
Type limitations (per BSS): - In Standard usage: none - In Detailed usage: The union of all observed cells per BSS for the detailed measurement types 1, 2, 3, 4, 5, 6, 19 (if used as Detailed), 26, 28 (if used as Detailed), 29 (if used as Detailed), 31, 34 (if used as Detailed) must not exceed 40 cells. Type definition: Set of counters describing result of radio measurements for a given cell / TRX.
Counter - 31
Evolium
RMS10
Counter Name : VQ_NOISY_UL_INTERFERENCE SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of calls suffering from problem of interference on the uplink path. Trigger condition: Whenever a call verifies : 100*(INTERFERED_UL_SAMPLES / NUM_UL_SAMPLES) > VQ_INTF_THRESHOLD This calculation is done when 48.058 RF CHANNEL RELEASE is received for the observed call. INTERFERED_UL_SAMPLES = nb of times where AV_RXQUAL_UL_VQ > VQ_RXQUAL and AV_RXLEV_UL_VQ>VQ_RXLEV AV_RXQUAL_UL_VQ : average on VQ_AVERAGE measurements of RXQUAL_UL AV_RXLEV_UL_VQ : average on VQ_AVERAGE measurements of RXLEV_UL NUM_UL_SAMPLES : total number of averages calculated on UL measurements during the call on the considered TRX
External comment:
--
Edition: 13 Released
Page 360
RMS11
Counter Name : VQ_NOISY_DL_INTERFERENCE SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of calls suffering from problems of interference on the downlink path. Trigger condition: Whenever a call verifies : 100*(INTERFERED_DL_SAMPLES / NUM_DL_SAMPLES) > VQ_INTF_THRESHOLD This calculation is done when 48.058 RF CHANNEL RELEASE is received for the observed call. INTERFERED_DL_SAMPLES = nb of times where AV_RXQUAL_DL_VQ > VQ_RXQUAL and AV_RXLEV_DL_VQ>VQ_RXLEV AV_RXQUAL_DL_VQ : average on VQ_AVERAGE measurements of RXQUAL_DL AV_RXLEV_DL_VQ : average on VQ_AVERAGE measurements of RXLEV_DL NUM_DL_SAMPLES : total number of averages calculated on DL measurements during the call on the considered TRX
External comment:
--
Edition: 13 Released
Page 361
RMS12
Counter Name : VQ_NOISY_UL_COVERAGE SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of calls suffering from bad coverage on the uplink path. Trigger condition: Whenever a call verifies : 100*(BAD_COVERAGE_UL_SAMPLES / NUM_UL_SAMPLES) > VQ_INTF_THRESHOLD This calculation is done when 48.058 RF CHANNEL RELEASE is received for the observed call. BAD_COVERAGE_UL_SAMPLES = nb of times where AV_RXQUAL_UL_VQ > VQ_RXQUAL and AV_RXLEV_UL_VQ<=VQ_RXLEV AV_RXQUAL_UL_VQ : average on VQ_AVERAGE measurements of RXQUAL_UL AV_RXLEV_UL_VQ : average on VQ_AVERAGE measurements of RXLEV_UL NUM_UL_SAMPLES : total number of averages calculated on DL measurements during the call on the considered TRX
External comment:
--
Edition: 13 Released
Page 362
RMS13
Counter Name : VQ_NOISY_DL_COVERAGE SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of calls suffering from bad coverage on the downlink path. Trigger condition: Whenever a call verifies : 100*(BAD_COVERAGE_DL_SAMPLES / NUM_DL_SAMPLES) > VQ_INTF_THRESHOLD This calculation is done when 48.058 RF CHANNEL RELEASE is received for the observed call. BAD_COVERAGE_DL_SAMPLES = nb of times where AV_RXQUAL_DL_VQ > VQ_RXQUAL and AV_RXLEV_DL_VQ<=VQ_RXLEV AV_RXQUAL_DL_VQ : average on VQ_AVERAGE measurements of RXQUAL_DL AV_RXLEV_DL_VQ : average on VQ_AVERAGE measurements of RXLEV_DL NUM_DL_SAMPLES : total number of averages calculated on DL measurements during the call on the considered TRX
External comment:
--
Edition: 13 Released
Page 363
RMS14
Counter Name : VQ_NOISY_UL_UNDEFINED SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of calls suffering from both problem of interference and bad coverage on the uplink path. These calls are not counted in VQ_NOISY_UL_COVERAGE or VQ_NOISY_UL_INTERFERENCE. Trigger condition: Whenever a call verifies : 100*(BAD_COVERAGE_UL_SAMPLES / NUM_UL_SAMPLES) <= VQ_INTF_THRESHOLD and 100*(INTERFERED_UL_SAMPLES / NUM_UL_SAMPLES) <= VQ_INTF_THRESHOLD and 100*(BAD_QUALITY_UL_SAMPLES / NUM_UL_SAMPLES) > VQ_INTF_THRESHOLD This calculation is done when 48.058 RF CHANNEL RELEASE is received for the observed call. BAD_COVERAGE_UL_SAMPLES = nb of times where AV_RXQUAL_UL_VQ > VQ_RXQUAL and AV_RXLEV_UL_VQ<=VQ_RXLEV INTERFERED_UL_SAMPLES = nb of times when AV_RXQUAL_UL_VQ > VQ_RXQUAL and AV_RXLEV_UL_VQ > VQ_RXLEV BAD_QUALITY_UL_SAMPLES = INTERFERED_UL_SAMPLES + BAD_COVERAGE_UL_SAMPLES = nb of times when AV_RXQUAL_UL_VQ > VQ_RXQUAL AV_RXQUAL_UL_VQ : average on VQ_AVERAGE measurements of RXQUAL_UL AV_RXLEV_UL_VQ : average on VQ_AVERAGE measurements of RXLEV_UL NUM_UL_SAMPLES : total number of averages calculated on UL measurements during the call on the considered TRX External comment:
--
Edition: 13 Released
Page 364
RMS15
Counter Name : VQ_NOISY_DL_UNDEFINED SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of calls suffering from both problem of interference and bad coverage on the downlink path. These calls are not counted in VQ_NOISY_DL_COVERAGE or VQ_NOISY_DL_INTERFERENCE. Trigger condition: Whenever a call verifies : 100*(BAD_COVERAGE_DL_SAMPLES / NUM_DL_SAMPLES) <= VQ_INTF_THRESHOLD and 100*(INTERFERED_DL_SAMPLES / NUM_DL_SAMPLES) <= VQ_INTF_THRESHOLD and 100*(BAD_QUALITY_DL_SAMPLES / NUM_DL_SAMPLES) > VQ_INTF_THRESHOLD This calculation is done when 48.058 RF CHANNEL RELEASE is received for the observed call. BAD_COVERAGE_DL_SAMPLES = nb of times where AV_RXQUAL_DL_VQ > VQ_RXQUAL and AV_RXLEV_DL_VQ<=VQ_RXLEV INTERFERED_DL_SAMPLES = nb of times when AV_RXQUAL_DL_VQ > VQ_RXQUAL and AV_RXLEV_DL_VQ > VQ_RXLEV BAD_QUALITY_DL_SAMPLES = INTERFERED_DL_SAMPLES + BAD_COVERAGE_DL_SAMPLES = nb of times when AV_RXQUAL_DL_VQ > VQ_RXQUAL AV_RXQUAL_DL_VQ : average on VQ_AVERAGE measurements of RXQUAL_DL AV_RXLEV_DL_VQ : average on VQ_AVERAGE measurements of RXLEV_DL NUM_DL_SAMPLES : total number of averages calculated on DL measurements during the call on the considered TRX External comment:
--
Edition: 13 Released
Page 365
RMS16
Counter Name : VQ_NOISY_UL_BAD_FER SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of calls with bad quality measurements and with bad FER measurements on the uplink path. Trigger condition: Whenever a call verifies : 100*(BAD_QUALITY_UL_SAMPLES / NUM_UL_SAMPLES) > VQ_INTF_THRESHOLD and 100*(BAD_QUAL_BAD_FER_UL_SAMPLES / BAD_QUALITY_UL_SAMPLES) > VQ_FER_THRESHOLD This calculation is done when 48.058 RF CHANNEL RELEASE is received for the observed call. In the equations above, the following notations are used: * BAD_QUALITY_UL_SAMPLES = INTERFERED_UL_SAMPLES + BAD_COVERAGE_UL_SAMPLES = nb of times when AV_RXQUAL_UL_VQ > VQ_RXQUAL * BAD_QUAL_BAD_FER_UL_SAMPLES = nb of times when AV_RXQUAL_UL_VQ > VQ_RXQUAL_VS_RXFER and AV_RXFER_UL_VQ > VQ_BAD_RXFER * AV_RXQUAL_UL_VQ : average on VQ_AVERAGE measurements of RXQUAL_UL * AV_RXLEV_UL_VQ : average on VQ_AVERAGE measurements of RXLEV_UL * NUM_UL_SAMPLES : total number of averages calculated on UL measurements during the call on the considered TRX External comment:
--
Edition: 13 Released
Page 366
RMS17
Counter Name : VQ_NOISY_UL_GOOD_FER SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of calls with bad quality measurements but with good FER measurements on the uplink path. Trigger condition: Whenever a call verifies : 100*(BAD_QUALITY_UL_SAMPLES / NUM_UL_SAMPLES) > VQ_INTF_THRESHOLD and 100*(BAD_QUAL_GOOD_FER_UL_SAMPLES / BAD_QUALITY_UL_SAMPLES) > VQ_FER_THRESHOLD This calculation is done when 48.058 RF CHANNEL RELEASE is received for the observed call. BAD_QUALITY_UL_SAMPLES = INTERFERED_UL_SAMPLES + BAD_COVERAGE_UL_SAMPLES = nb of times when AV_RXQUAL_UL_VQ > VQ_RXQUAL BAD_QUAL_GOOD_FER_UL_SAMPLES = nb of times when AV_RXQUAL_UL_VQ > VQ_RXQUAL_VS_RXFER and AV_RXFER_UL_VQ <= VQ_GOOD_RXFER AV_RXQUAL_UL_VQ : average on VQ_AVERAGE measurements of RXQUAL_UL AV_RXFER_UL_VQ : average on VQ_AVERAGE measurements of FER_UL NUM_UL_SAMPLES : total number of averages calculated on UL measurements during the call on the considered TRX External comment:
--
Edition: 13 Released
Page 367
RMS18
Counter Name : VQ_ABNORMAL_BAD_FER SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of calls with fair quality measurements but with bad FER measurements on the uplink path. Trigger condition: Whenever a call verifies : 100*(FAIR_QUAL_BAD_FER_UL_SAMPLES / FAIR_QUALITY_UL_SAMPLES) > VQ_FER_THRESHOLD This calculation is done when 48.058 RF CHANNEL RELEASE is received for the observed call. FAIR_QUAL_BAD_FER_UL_SAMPLES = nb of times when AV_RXQUAL_UL_VQ<VQ_RXQUAL_VS_RXFER and AV_RXFER_UL_VQ>VQ_BAD_RXFER AV_RXQUAL_UL_VQ : average on VQ_AVERAGE measurements of RXQUAL_UL AV_RXFER_UL_VQ : average on VQ_AVERAGE measurements of FER_UL NUM_UL_SAMPLES : total number of averages calculated on UL measurements during the call on the considered TRX External comment:
--
Edition: 13 Released
Page 368
Evolium
RMS20
Observation Name TRE_BAND Observation Frequency band of the TRX. The frequency band of the TRX is encoded as follows: 00: The frequencies defined are those available for a P-GSM TRX (See external comment) 01: The frequencies defined are those available for a DCS1800 TRX (See external comment) 02: The frequencies defined are those available for a E-GSM TRX (See external comment) 03: The frequencies defined are those available for a DCS1900 TRX (See external comment) 04: Not used 05: Not used 06: The frequencies defined are those available for a GSM850 TRX (See external comment) External comment:
Length 1
number
The term E-GSM TRX refers to : 1. a TRX configured with at least one frequency belonging to the G1 band in an E-GSM cell (i.e. a cell where
RMS21
Observation Name IND_TRE_OVERLOAD Observation Indicator whether a TRX overload occurred. External comment:
--
Length 1
number
Edition: 13 Released
Page 369
Evolium
RMS22
Observation Name IND_RMS_RESTARTED
Length 1
Observation Flag set/reset by BSC. Flag is set when during the RMS campaign, the RMS job is restarted on the concerned TRE (case modification of threshold params, TRE reset). External comment:
--
number
RMS23
Observation Name IND_CI_PARTIAL_OBSERVATION
Length 1
Observation bit map indicating that the measurements (for and only for CI vector computation) on either NMR ("Normal" Measurements Reports) or on EMR (Extended Measurements Reports) or on both or none were RESTARTED during RMS job duration. This counter is encoded as follows: 0: no CI partial result 1: EMO/EMR CI partial result 2: NMR CI partial result 3: EMR and NMR partial result External comment:
--
number
RMS24
Observation Name IND_CI_OVERFLOW
Length 1
Observation Flag indicating that the upper limit of 42 CI vectors is exceeded => each new result (couple (BSIC, ARFCN) ) will not be taken into account. External comment:
--
number
Edition: 13 Released
Page 370
RMS31
Counter Name : TOT_SEIZ_TCH SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Number of successful TCH seizures for the concerned cell. Trigger condition: Whenever an ESTABLISH INDICATION message is received from the MS to indicate the activation of a TCH channel for normal assignment or handover. External comment:
--
RMS32
Counter Name : TOT_MEAS SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of MEASUREMENT RESULTS messages sent and used for RMS computation in the concerned Trigger condition: Whenever a 48.058 MEASUREMENT RESULTS message is sent by the BTS, and used for RMS. External comment:
--
Edition: 13 Released
Page 371
RMS33
Counter Name : TOT_MEAS_L1INFO_NOL3INFO SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of MEASUREMENT RESULTS messages sent without Layer 3 information but with Layer 1 present. The result is first calculated by the BTS at a TRX level, then compilated by the BSC at a cell level. This counter reflects the uplink quality, it is incremented due to bad uplink radio quality or long handover Trigger condition: Whenever a 48.058 MEASUREMENT RESULTS message is sent by the BTS without Layer 3 information but with Layer 1 present, and used for RMS. External comment:
--
RMS34
Counter Name : TOT_MEAS_DTX_UL SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of measurement results used for RMS, where DTX is used on the uplink path. Trigger condition: Whenever a 48.058 MEASUREMENT RESULTS message is sent by the BTS, with DTX_UL=1, used for External comment:
--
Edition: 13 Released
Page 372
RMS35
Counter Name : TOT_MEAS_DTX_DL SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of measurement results indicating that DTX is used on the downlink path, used for RMS. Trigger condition: Whenever a 48.058 MEASUREMENT RESULTS message is sent by the BTS, with DTX_UL=1, and used for RMS. External comment:
--
RMS36
Counter Name : PERC_TA_GT_TA_STAT SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Percentage of reported Timing Advance with a value above TA_STAT. Trigger condition: Whenever a 48.058 MEASUREMENT RESULT is sent by the BTS with Timing Advance > TA_STAT. The result is divided by RMS32, and presented as a %. External comment:
--
Edition: 13 Released
Page 373
Evolium
RMS37
Observation Name MAX_TA
Length 1
Observation Greatest value of Timing Advance reported to the BSC for the concerned cell. External comment:
--
bper
RMS38
Counter Name : TOT_EMR SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Total number of Extended Measurement Results. Trigger condition: External comment:
--
Edition: 13 Released
Page 374
RMS3a
Counter Name : TPR_RXQUAL_UL_RXLEV_UL SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 3x 8x10 results. Each cell (i,j) of the table contains : 1) number of reports in which UL RXQUAL is equal to j and UL RXLEV is reported in level band i (Cij) 2) corresponding averaged value of MS power level 3) corresponding averaged value of Timing Advance For Cij, the result is given as follows : Cij=Vij x 254 / Max_i, where Vij represents the real number of measurements, and Max_i the greatest value of Vij, for i given (see RMS3b). Cij=0 indicates 'number of measurements = 0' Cij=254 indicates 'number of measurements = Max_i' Cij=255 is reserved to indicate overflow. The values of the average MS power level (2) and the average Timing Advance (3) are directly given, both with a precision of 0.25. Note that these values (2 and 3) that are indicated in the ASCII file, which can be obtained via the OBSYNT interface, still have to be divided by 4, whereas the values that are provided at the user interface are the correct ones. UL RXQUAL can take values from 0 to 7. Level band i is defined by : MEAS_STAT_LEV_(i-1)<= RXLEV < MEAS_STAT_LEV_i MEAS_STAT_LEV_0 = -47 dBm, MEAS_STAT_LEV_10 = -110 dBm According to 3GPP, values of RXLEV lower than -110 dBm are considered as equal to -110 dBm Trigger condition: Whenever in a 44.018 MEASUREMENT RESULT uplink RXQUAL is equal to j, while uplink RXLEV for the same call is in the given interval of MEAS_STAT_LEV. External comment:
--
Edition: 13 Released
Page 375
RMS3b
Counter Name : TMR_RXQUAL_UL_RXLEV_UL SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 10 maximum results. Each cell Ci of the table indicates the greatest value of the Vij for a i given in RMS3a. Trigger condition: External comment:
--
Edition: 13 Released
Page 376
RMS44a
Counter Name : AMR_FR_UL_BAD SFD reference : 3BK 10204 0544 DTZZA ("RMS improvements") Data collection Cumulative
Release Measured object Package 1 B9 TRX
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 8 results Each cell (i) of the table contains : number of AMR FR UL bad speech frames. The result is given as follows : Ci=MAX(Round[Vi x 254 / Max], 1), where Vi represents the real number of measurements, and Max the greatest value of Vi (see RMS44b). Ci=0 indicates 'number of measurements = 0' Ci=254 indicates 'number of measurements = Max' Ci=255 is reserved to indicate overflow. AMR FR codecs are defined by : codec 1 = 4.75 kbit/s, codec 2 = 5.15 kbit/s, codec 3 = 5.9 kbit/s, codec 4 = 6.7 kbit/s, codec 5 = 7.4 kbit/s, codec 6 = 7.95 kbit/s, codec 7 = 10.2 kbit/s, codec 8 = 12.2 kbit/s
Trigger condition: The TRE counts for each AMR call and for each AMR FR codec the number of bad speech frames received from the MS (or sent to the TC) in uplink. Only speech frames of type "Speech_Degraded", "Speech_Bad" or "SID_Bad" shall be taken into account. External comment:
This counter is only reported for cells mapped on Evolium BTS.
Edition: 13 Released
Page 377
RMS44b
Counter Name : MAX_AMR_FR_UL_BAD SFD reference : 3BK 10204 0544 DTZZA ("RMS improvements") Data collection Cumulative
Release Measured object Package 1 B9 TRX
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Greatest value of the Vi in RM44a. Trigger condition: External comment:
Edition: 13 Released
Page 378
RMS45a
Counter Name : AMR_HR_UL_BAD SFD reference : 3BK 10204 0544 DTZZA ("RMS improvements") Data collection Cumulative
Release Measured object Package 1 B9 TRX
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 5 results Each cell (i) of the table contains : number of AMR HR UL bad speech frames. The result is given as follows : Ci=MAX(Round[Vi x 254 / Max], 1), where Vi represents the real number of measurements, and Max the greatest value of Vi (see RMS45b). Ci=0 indicates 'number of measurements = 0' Ci=254 indicates 'number of measurements = Max' Ci=255 is reserved to indicate overflow. AMR HR codecs are defined by : codec 1 = 4.75 kbit/s, codec 2 = 5.15 kbit/s, codec 3 = 5.9 kbit/s, codec 4 = 6.7 kbit/s, codec 5 = 7.4 kbit/s
Trigger condition: The TRE counts for each AMR call and for each AMR HR codec the number of bad speech frames received from the MS (or sent to the TC) in uplink. Only speech frames of type "Speech_Degraded", "Speech_Bad" or "SID_Bad" shall be taken into account. External comment:
This counter is only reported for cells mapped on Evolium BTS.
Edition: 13 Released
Page 379
RMS45b
Counter Name : MAX_AMR_HR_UL_BAD SFD reference : 3BK 10204 0544 DTZZA ("RMS improvements") Data collection Cumulative
Release Measured object Package 1 B9 TRX
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Greatest value of the Vi in RM45a. Trigger condition: External comment:
Edition: 13 Released
Page 380
RMS46a
Counter Name : AMR_FR_UL_RXLEV_UL SFD reference : 3BK 10204 0544 DTZZA ("RMS improvements") Data collection Cumulative
Release Measured object Package 1 B9 TRX
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 8x10 results Each cell (i,k) of the table contains : 1) number of correct UL speech frames using AMR FR codec k for which UL RXLEV is reported in level band i. The result is given as follows : Cik=MAX(Round[Vik x 254 / Max_i], 1), where Vik represents the real number of measurements, and Max_i the greatest value of Vik, for i given (see RMS46b). Cik=0 indicates 'number of measurements = 0' Cik=254 indicates 'number of measurements = Max_i' Cik=255 is reserved to indicate overflow. Level band i is defined by : MEAS_STAT_LEV_(i-1)<= RXLEV < MEAS_STAT_LEV_i MEAS_STAT_LEV_0 = -47 dBm, MEAS_STAT_LEV_10 = -110 dBm AMR FR codecs are defined by : codec 1 = 4.75 kbit/s, codec 2 = 5.15 kbit/s, codec 3 = 5.9 kbit/s, codec 4 = 6.7 kbit/s, codec 5 = 7.4 kbit/s, codec 6 = 7.95 kbit/s, codec 7 = 10.2 kbit/s, codec 8 = 12.2 kbit/s According to 3GPP, values of RXLEV lower than -110 dBm are considered as equal to -110 dBm Trigger condition: In the period of the SACCH multiframe, the TRE counts for each AMR call and for each AMR FR codec the number of correct speech frames received from the MS (or sent to the TRAU) in uplink. To insure consistency of the results, only speech frames of type "Speech_Good" or "SID_Update" shall be taken into account. At reception of the measurement report of a given MS, the results are gathered in the line of the matrix
External comment:
Edition: 13 Released
Page 381
RMS46b
Counter Name : MAX_AMR_FR_UL_RXLEV_UL SFD reference : 3BK 10204 0544 DTZZA ("RMS improvements") Data collection Cumulative
Release Measured object Package 1 B9 TRX
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 10 maximum results. Each cell Ci of the table indicates the greatest value of the Vik for a i given in RMS46a. Trigger condition: External comment:
This counter is only reported for cells mapped on Evolium BTS.
Edition: 13 Released
Page 382
RMS47a
Counter Name : AMR_FR_DL_RXLEV_DL SFD reference : 3BK 10204 0544 DTZZA ("RMS improvements") Data collection Cumulative
Release Measured object Package 1 B9 TRX
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 8x10 results Each cell (i,k) of the table contains : 1) number of correct DL speech frames using AMR FR codec k for which DL RXLEV is reported in level band i. The result is given as follows : Cik=MAX(Round[Vik x 254 / Max_i], 1), where Vik represents the real number of measurements, and Max_i the greatest value of Vik, for i given (see RMS47b). Cik=0 indicates 'number of measurements = 0' Cik=254 indicates 'number of measurements = Max_i' Cik=255 is reserved to indicate overflow. Level band i is defined by : MEAS_STAT_LEV_(i-1)<= RXLEV < MEAS_STAT_LEV_i MEAS_STAT_LEV_0 = -47 dBm, MEAS_STAT_LEV_10 = -110 dBm AMR FR codecs are defined by : codec 1 = 4.75 kbit/s, codec 2 = 5.15 kbit/s, codec 3 = 5.9 kbit/s, codec 4 = 6.7 kbit/s, codec 5 = 7.4 kbit/s, codec 6 = 7.95 kbit/s, codec 7 = 10.2 kbit/s, codec 8 = 12.2 kbit/s According to 3GPP, values of RXLEV lower than -110 dBm are considered as equal to -110 dBm Trigger condition: In the period of the SACCH multiframe, the TRE counts for each AMR call and for each AMR FR codec the number of correct speech frames received from the TC (or sent to the MS) in downlink. To insure consistency of the results, only speech frames of type "Speech_Good" or "SID_Update" shall be taken into account. At reception of the measurement report of a given MS, the results are gathered in the line of the matrix
External comment:
Edition: 13 Released
Page 383
RMS47b
Counter Name : MAX_AMR_FR_DL_RXLEV_DL SFD reference : 3BK 10204 0544 DTZZA ("RMS improvements") Data collection Cumulative
Release Measured object Package 1 B9 TRX
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 10 maximum results. Each cell Ci of the table indicates the greatest value of the Vik for a i given in RMS47a. Trigger condition: External comment:
This counter is only reported for cells mapped on Evolium BTS.
Edition: 13 Released
Page 384
RMS48a
Counter Name : AMR_HR_UL_RXLEV_UL SFD reference : 3BK 10204 0544 DTZZA ("RMS improvements") Data collection Cumulative
Release Measured object Package 1 B9 TRX
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 5x10 results Each cell (i,k) of the table contains : 1) number of correct speech frames using AMR HR codec k for which UL RXLEV is reported in level band i. The result is given as follows : Cik=MAX(Round[Vik x 254 / Max_i], 1), where Vik represents the real number of measurements, and Max_i the greatest value of Vik, for i given (see RMS46b). Cik=0 indicates 'number of measurements = 0' Cik=254 indicates 'number of measurements = Max_i' Cik=255 is reserved to indicate overflow. Level band i is defined by : MEAS_STAT_LEV_(i-1)<= RXLEV < MEAS_STAT_LEV_i MEAS_STAT_LEV_0 = -47 dBm, MEAS_STAT_LEV_10 = -110 dBm AMR HR codecs are defined by : codec 1 = 4.75 kbit/s, codec 2 = 5.15 kbit/s, codec 3 = 5.9 kbit/s, codec 4 = 6.7 kbit/s, codec 5 = 7.4 kbit/s. Trigger condition: In the period of the SACCH multiframe, the TRE counts for each AMR call and for each AMR HR codec the number of correct speech frames received from the MS (or sent to the TRAU) in uplink. To insure consistency of the results, only speech frames of type "Speech_Good" or "SID_Update" shall be taken into account. At reception of the measurement report of a given MS, the results are gathered in the line of the matrix
External comment:
Edition: 13 Released
Page 385
RMS48b
Counter Name : MAX_AMR_HR_UL_RXLEV_UL SFD reference : 3BK 10204 0544 DTZZA ("RMS improvements") Data collection Cumulative
Release Measured object Package 1 B9 TRX
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 10 maximum results. Each cell Ci of the table indicates the greatest value of the Vik for a i given in RMS48a. Trigger condition: External comment:
This counter is only reported for cells mapped on Evolium BTS.
Edition: 13 Released
Page 386
RMS49a
Counter Name : AMR_HR_DL_RXLEV_DL SFD reference : 3BK 10204 0544 DTZZA ("RMS improvements") Data collection Cumulative
Release Measured object Package 1 B9 TRX
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 5x10 results Each cell (i,k) of the table contains : 1) number of correct DL speech frames using AMR HR codec k for which DL RXLEV is reported in level band i. The result is given as follows : Cik=MAX(Round[Vik x 254 / Max_i], 1), where Vik represents the real number of measurements, and Max_i the greatest value of Vik, for i given (see RMS46b). Cik=0 indicates 'number of measurements = 0' Cik=254 indicates 'number of measurements = Max_i' Cik=255 is reserved to indicate overflow. Level band i is defined by : MEAS_STAT_LEV_(i-1)<= RXLEV < MEAS_STAT_LEV_i MEAS_STAT_LEV_0 = -47 dBm, MEAS_STAT_LEV_10 = -110 dBm AMR HR codecs are defined by : codec 1 = 4.75 kbit/s, codec 2 = 5.15 kbit/s, codec 3 = 5.9 kbit/s, codec 4 = 6.7 kbit/s, codec 5 = 7.4 kbit/s. Trigger condition: In the period of the SACCH multiframe, the TRE counts for each AMR call and for each AMR HR codec the number of correct speech frames received from the TC (or sent to the MS) in downlink. To insure consistency of the results, only speech frames of type "Speech_Good" or "SID_Update" shall be taken into account. At reception of the measurement report of a given MS, the results are gathered in the line of the matrix
External comment:
Edition: 13 Released
Page 387
RMS49b
Counter Name : MAX_AMR_HR_DL_RXLEV_DL SFD reference : 3BK 10204 0544 DTZZA ("RMS improvements") Data collection Cumulative
Release Measured object Package 1 B9 TRX
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 10 maximum results. Each cell Ci of the table indicates the greatest value of the Vik for a i given in RMS49a. Trigger condition: . External comment:
This counter is only reported for cells mapped on Evolium BTS.
Edition: 13 Released
Page 388
RMS4a
Counter Name : TPR_RXQUAL_DL_RXLEV_DL SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 3x 8x10 results. Each cell (i,j) of the table contains : 1) number of reports in which DL RXQUAL is equal to j and DL RXLEV is reported in level band I (Cij) 2) corresponding averaged value of BS power level : For G2 BTS : corresponding averaged value of [BTS_MAX_OUTPUT_POWER - abs(BS_TXPWR)] For Evolium BTS : corresponding averaged value of [ MAX_POWER_PER_TRX- abs(BS_TXPWR)]. BS_TXPWR is the BTS transmitted power defined relatively to the maximum absolute output power of the BTS. BS_TXPWR is expressed in dB, whereas BTS_MAX_OUTPUT_POWER is expressed in dBm. Note that the formula is written independently of the coding used for the variables. The function abs() gives the absolute value of its argument. 3) corresponding averaged value of Timing Advance For Cij, the result is given as follows : Cij=Vij x 254 / Max_i, where Vij represents the real number of measurements, and Max_i the greatest value of Vij, for i given (see RMS4b). Cij=0 indicates 'number of measurements = 0' Cij=254 indicates 'number of measurements = Max_i' Cij=255 is reserved to indicate overflow. The values of the average BS power level (2) and the average Timing Advance (3) are directly given, both with a precision of 0.25. Note that these values (2 and 3) that are indicated in the ASCII file, which can be obtained via the OBSYNT interface, still have to be divided by 4, whereas the values that are provided at the user interface are the correct ones. DL RXQUAL can take values from 0 to 7. Level band i is defined by : MEAS_STAT_LEV_(i-1)<= RXLEV < MEAS_STAT_LEV_i MEAS_STAT_LEV_0 = -47 dBm, MEAS_STAT_LEV_10 = -110 dBm According to 3GPP, values of RXLEV lower than -110 dBm are considered as equal to -110 dBm Trigger condition: Whenever in a 44.018 MEASUREMENT RESULT DL RXQUAL is equal to j, while DL RXLEV for the same call is in the given interval of MEAS_STAT_LEV. External comment:
--
Edition: 13 Released
Page 389
RMS4b
Counter Name : TMR_RXQUAL_DL_RXLEV_DL SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 10 maximum results. Each cell Ci of the table indicates the greatest value of the Vij for a i given in RMS4a. Trigger condition: External comment:
--
Edition: 13 Released
Page 390
RMS50a
Counter Name : TPR_TIMING_ADVANCE SFD reference : 3BK 10204 0544 DTZZA ("RMS improvements") Data collection Cumulative
Release Measured object Package 1 B9 TRX
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 10 results Each cell (i) of the table contains : 1) number of reports in which Timing Advance is in Timing Advance band i The result is given as follows : Ci=MAX(ROUND[Vi x 254 / Max], 1), where Vi represents the real number of measurements, and Max the greatest value of Vi, (see RMS50b). Ci=0 indicates 'number of measurements = 0' Ci=254 indicates 'number of measurements = Max' Ci=255 is reserved to indicate overflow. Timing Advancee band is defined by : MEAS_STAT_TA_(i-1)<= Timing Advance < MEAS_STAT_TA_i MEAS_STAT_TA_0 = -110 dB, MEAS_STAT_TA_10 = 110 dB
Trigger condition: Whenever in a 44.018 MEASUREMENT RESULT the Timing Advance is in the given interval of MEAS_STAT_TA. External comment:
This counter is only reported for cells mapped on Evolium BTS.
Edition: 13 Released
Page 391
RMS50b
Counter Name : MAX_TIMING_ADVANCE SFD reference : 3BK 10204 0544 DTZZA ("RMS improvements") Data collection Cumulative
Release Measured object Package 1 B9 TRX
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Greatest value of the Vi in RM50a. Trigger condition: External comment:
Edition: 13 Released
Page 392
RMS51
Counter Name : TPR_UL_RXLEV_TA_BAND SFD reference : 3BK 10204 0544 DTZZA ("RMS improvements") Data collection Cumulative
Release Measured object Package 1 B9 TRX
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 10 results Each cell (i) of the table contains : average value of UpLink Rxlev of reports in TA band i. Averaged Rxlev is given with a precision of 2 digits after the comma (step size for coding = 0.01, -110 dBm coded 0, -109.99 dBm coded 1...). i = 1...10 TA band i is defined by : MEAS_STAT_TA_ (i-1)<= Timing Advance < MEAS_STAT_TA_i MEAS_STAT_TA_0 = 0 bper, MEAS_STAT_LEV_10 = 63 bper. According to 3GPP, values of RXLEV lower than -110 dBm are considered as equal to -110 dBm
Trigger condition: Whenever a MEASUREMENT RESULT is received, UL RXLEV is stored. At the end of the measurement period, UL RXLEV corresponding to the same TA band are averaged. External comment:
This counter is only reported for cells mapped on Evolium BTS.
Edition: 13 Released
Page 393
RMS52
Counter Name : TPR_DL_RXLEV_TA_BAND SFD reference : 3BK 10204 0544 DTZZA ("RMS improvements") Data collection Cumulative
Release Measured object Package 1 B9 TRX
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 10 results Each cell (i) of the table contains : average value of DownLink Rxlev of reports in TA band i. Averaged Rxlev is given with a precision of 2 digits after the comma (step size for coding = 0.01, -110 dBm coded 0, -109.99 dBm coded 1...). i = 1...10 TA band i is defined by : MEAS_STAT_TA_ (i-1)<= Timing Advance < MEAS_STAT_TA_i MEAS_STAT_TA_0 = 0 bper, MEAS_STAT_LEV_10 = 63 bper. According to 3GPP, values of RXLEV lower than -110 dBm are considered as equal to -110 dBm
Trigger condition: Whenever a MEASUREMENT RESULT is received, DL RXLEV is stored. At the end of the measurement period, DL RXLEV corresponding to the same TA band are averaged. External comment:
This counter is only reported for cells mapped on Evolium BTS.
Edition: 13 Released
Page 394
RMS53
Counter Name : TPR_UL_RXQUAL_TA_BAND SFD reference : 3BK 10204 0544 DTZZA ("RMS improvements") Data collection Cumulative
Release Measured object Package 1 B9 TRX
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 10 results Each cell (i) of the table contains : average value of UpLink Rxqual of reports in TA band i. Averaged Rxqual is given with a precision of 2 digits after the comma (step size for coding = 0.01, 0 coded 0, 0.01 coded 1, ...). i = 1...10 TA band i is defined by : MEAS_STAT_TA_ (i-1)<= Timing Advance < MEAS_STAT_TA_i MEAS_STAT_TA_0 = 0 bper, MEAS_STAT_LEV_10 = 63 bper.
Trigger condition: Whenever a MEASUREMENT RESULT is received, UL RXQUAL is stored. At the end of the measurement period, UL RXQUAL corresponding to the same TA band are averaged. External comment:
This counter is only reported for cells mapped on Evolium BTS.
Edition: 13 Released
Page 395
RMS54
Counter Name : TPR_DL_RXQUAL_TA_BAND SFD reference : 3BK 10204 0544 DTZZA ("RMS improvements") Data collection Cumulative
Release Measured object Package 1 B9 TRX
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 10 results Each cell (i) of the table contains : average value of DownLink Rxqual of reports in TA band i. Averaged Rxqual is given with a precision of 2 digits after the comma (step size for coding = 0.01, 0 coded 0, 0.01 coded 1, ...). i = 1...10 TA band i is defined by : MEAS_STAT_TA_ (i-1)<= Timing Advance < MEAS_STAT_TA_i MEAS_STAT_TA_0 = 0 bper, MEAS_STAT_LEV_10 = 63 bper.
Trigger condition: Whenever a MEASUREMENT RESULT is received, DL RXQUAL is stored. At the end of the measurement period, DL RXQUAL corresponding to the same TA band are averaged. External comment:
This counter is only reported for cells mapped on Evolium BTS.
Edition: 13 Released
Page 396
RMS5a
Counter Name : TPR_BFI_RXLEV_UL SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 10x10 results Each cell (i,j) of the table contains : 1) number of reports in which consecutive BFI counter is in BFI band j and UL RXLEV is reported in level band I (Cij) The result is given as follows : Cij=Vij x 254 / Max_i, where Vij represents the real number of measurements, and Max_i the greatest value of Vij, for i given (see RMS5b). Cij=0 indicates 'number of measurements = 0' Cij=254 indicates 'number of measurements = Max_i' Cij=255 is reserved to indicate overflow. BFI band is defined by : MEAS_STAT_BFI_(j-1)<= Consecutive BFI counter < MEAS_STAT_BFI_j MEAS_STAT_BFI_0 = 0, MEAS_STAT_BFI_10 = 25 Level band i is defined by : MEAS_STAT_LEV_(i-1)<= RXLEV < MEAS_STAT_LEV_i MEAS_STAT_LEV_0 = -47 dBm, MEAS_STAT_LEV_10 = -110 dBm According to 3GPP, values of RXLEV lower than -110 dBm are considered as equal to -110 dBm
Trigger condition: Whenever the Consecutive BFI counter is in the given interval of MEAS_STAT_BFI, while RXLEV_UL for the same call is in the given interval of MEAS_STAT_LEV. RMS5a is not incremented while DTX is applied on the uplink path. Consecutive BFI counter is incremented : 1) Whenever, within the period of the SACCH multiframe, a speech frame with BFI=1 is received while the previous speech frame had also BFI=1. The counter must hold concurrently several periods of consecutive bad speech frames within the SACCH multiframe.
External comment:
--
Edition: 13 Released
Page 397
RMS5b
Counter Name : TMR_BFI_RXLEV_UL SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 10 maximum results. Each cell Ci of the table indicates the greatest value of the Vij for a i given in RMS5a. Trigger condition: External comment:
--
Edition: 13 Released
Page 398
RMS6a
Counter Name : TPR_RADIO_LINK SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 10 results Each cell (i) of the table contains : 1) number of reports in which Radio linkI counter is in S band i The result is given as follows : Ci=Vi x 254 / Max_i, where Vi represents the real number of measurements, and Max_i the greatest value of Vi (see RMS6b). Ci=0 indicates 'number of measurements = 0' Ci=254 indicates 'number of measurements = Max_i' Ci=255 is reserved to indicate overflow. S band is defined by : MEAS_STAT_S_(i-1)<= Radio link counter < MEAS_STAT_S_i MEAS_STAT_S_0 = 0, MEAS_STAT_S_10 = 128
Trigger condition: Whenever the Radio Link counter (S) is in the given interval of MEAS_STAT_S. External comment:
--
Edition: 13 Released
Page 399
RMS6b
Counter Name : MAX_RADIO_LINK SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Greatest value of the Vi in RMS6a. Trigger condition: External comment:
--
Edition: 13 Released
Page 400
RMS7a
Counter Name : TPR_PATH_BALANCE SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 10 results Each cell (i) of the table contains : 1) number of reports in which Path Balance is in Path Balance band i The result is given as follows : Ci=Vi x 254 / Max_i, where Vi represents the real number of measurements, and Max_i the greatest value of Vi, (see RMS7b). Ci=0 indicates 'number of measurements = 0' Ci=254 indicates 'number of measurements = Max_i' Ci=255 is reserved to indicate overflow. Path Balance band is defined by : MEAS_STAT_PATH_BALANCE_(i-1)<= Path balance < MEAS_STAT_PATH_BALANCE_i MEAS_STAT_PATH_BALANCE_0 = -110 dB, MEAS_STAT_PATH_BALANCE_10 = 110 dB Trigger condition: Whenever in a 44.018 MEASUREMENT RESULT the Path Balance is in the given interval of MEAS_STAT_PATH_BALANCE.
External comment:
--
Path Balance = (RXLEV_UL-MS_TXPWR) - (RXLEV_DL - [BTS_MAX_OUTPUT_POWER abs(BS_TXPWR)]), where BS_TXPWR is the BTS transmitted power defined relatively to the maximum absolute output power of the BTS. BS_TXPWR is expressed in dB, whereas BTS_MAX_OUTPUT_POWER is expressed in dBm. RXLEV_UL and RXLEV_DL are the received signal levels by the base station and by the mobile station respectively. They are expressed in dBm. MS_TXPWR is the transmission power of the mobile station and expressed in dBm, too. Note that the formula is written independently of the coding used for the variables. The function abs() gives the absolute value of its
Edition: 13 Released
Page 401
RMS7b
Counter Name : MAX_PATH_BALANCE SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Greatest value of the Vi in RMS7a. Trigger condition: External comment:
--
Edition: 13 Released
Page 402
RMS8a
Counter Name : TPR_CIN SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 10 results per neighbour cell. Each cell i of the table contains : 1) number of reports in which the C/I related to the neighbour cell is reported in C/I band i. The result is given as follows : Ci=Vi x 254 / RMS8b, where Vi represents the real number of measurements Ci=0 indicates 'number of measurements = 0' Ci=254 indicates 'number of measurements = Max_i' Ci=255 is reserved to indicate overflow. C/I band is defined by : MEAS_STAT_PATH_C_I_(i-1)<= C/I < MEAS_STAT_C_I_i MEAS_STAT_PATH_C_I_0 = -63 dB, MEAS_STAT_PATH_C_I_10 = 63 dB If EN_BALANCED_CI = TRUE then C/I (dB) = RXLEV_DL + abs(BS_TXPWR - BS_TXPWR_MAX) - RXLEV_NCELL Note that the formula is written independently of the coding used for the variables. RXLEV_DL and RXLEV_NCELL are the received signal levels of the serving and of the neighbour cells, expressed in dBm. BS_TXPWR is the BTS transmitted power and BS_TXPWR_MAX is the maximum allowed BTS transmission power. Both are defined relatively to the maximum absolute output power of the BTS (BTS_MAX_OUTPUT_POWER). BS_TXPWR and BS_TXPWR_MAX are expressed in dB. The function abs() gives the absolute value of its argument. else C/I (dB) = RXLEV_DL (dBm) - RXLEV_NCELL (dBm) Trigger condition: Whenever a measurement report indicates that C/I value for the call related to the neighbour cell is included in the corresponding interval. External comment:
--
Edition: 13 Released
Page 403
RMS8b
Counter Name : MR_CIN SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Greatest value of the Vi in RMS8a. Trigger condition: External comment:
--
Edition: 13 Released
Page 404
RMS9a
Counter Name : TPR_CIF SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Table of 10 results per frequency reported by extended measurement. Each cell i of the table contains : 1) number of reports in which the C/I related to the extended measurement frequency is reported in C/I band i. The result is given as follows : Ci=Vi x 254 / RMS9b, where Vi represents the real number of measurements Ci=0 indicates 'number of measurements = 0' Ci=254 indicates 'number of measurements = Max_i' Ci=255 is reserved to indicate overflow. C/I band is defined by : MEAS_STAT_PATH_C_I_(i-1)<= C/I < MEAS_STAT_C_I_i MEAS_STAT_PATH_C_I_0 = -63 dBm, MEAS_STAT_PATH_C_I_10 = 63 dBm If EN_BALANCED_CI = TRUE then C/I (dB) = RXLEV_DL + abs(BS_TXPWR - BS_TXPWR_MAX) - RXLEV_NCELL Note that the formula is written independently of the coding used for the variables. RXLEV_DL and RXLEV_NCELL are the received signal levels of the serving and of the neighbour cells, expressed in dBm. BS_TXPWR is the BTS transmitted power and BS_TXPWR_MAX is the maximum allowed BTS transmission power. Both are defined relatively to the maximum absolute output power of the BTS (BTS_MAX_OUTPUT_POWER). BS_TXPWR and BS_TXPWR_MAX are expressed in dB. The function abs() gives the absolute value of its argument. else C/I (dB) = RXLEV_DL (dBm) - RXLEV_NCELL (dBm) Trigger condition: Whenever a measurement report indicates that C/I value for the extended measurement frequency is included in the corresponding interval. External comment:
--
Edition: 13 Released
Page 405
RMS9b
Counter Name : MR_CIF SFD reference : 3BK 10204 0486 DTZZA ("RMS") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Greatest value of the Vi in RMS9a. Trigger condition: External comment:
--
RMSp80
Parameter Name :
NEIGB_CELL_ID
SFD reference : 3BK 10204 0486 DTZZA ("RMS") Parameter BCCH ARFCN and BSIC of the neighbour cell. External comment:
--
Measured unit:
Length 3
number
RMSp90
Parameter Name :
Frequency ARFCN
SFD reference : 3BK 10204 0486 DTZZA ("RMS") Parameter ARFCN of the frequency reported via Extended Measurement Reporting. External comment:
--
Measured unit:
Length 2
number
Edition: 13 Released
Page 406
RMSpa
Evolium
Parameter Name :
PAR_EN_BALANCED_CI
SFD reference : 3BK 10204 0486 DTZZA ("RMS") Parameter Indicates if the C/I measure is balanced or not. External comment:
--
Measured unit:
Length 1
number
RMSpb
Parameter Name :
PAR_TA_STAT
Parameter Contains the value of the parameter TA_STAT. TA_STAT is a Threshold on timing advance to define the cell limit used for Radio Measurements Statistics. Min = 0 bit, max = 64 bit External comment:
--
Measured unit:
Length 1
bper
RMSpc
Parameter Name :
PAR_VQ_AVERAGE
Parameter PAR_VQ_AVERAGE contains the value of the parameter VQ_AVERAGE for the concerned cell. VQ_AVERAGE represents the Average window size on measurements to obtain samples for Voice Quality statistics. Min=0 Samfr, max=128 Samfr External comment:
--
Measured unit:
Length 1
Samfr
RMSpd
Parameter Name :
PAR_VQ_RXLEV
Parameter PAR_VQ_RXLEV contains the value of the parameter VQ_RXLEV for the concerned cell. VQ_RXLEV is Radio level threshold to specify bad quality samples for Voice Quality statistics. Min = -110 dBm, max=-65 dBm External comment:
--
Measured unit:
Length 1
dBm
Edition: 13 Released
Page 407
RMSpe
Evolium
Parameter Name :
PAR_VQ_RXQUAL
Parameter PAR_VQ_RXQUAL represents the value of the parameter VQ_RXQUAL. VQ_RXQUAL is a Radio quality threshold to specify bad quality samples for Voice Quality statistics. Min = 0, Max = 7 External comment:
--
Measured unit:
Length 1
number
RMSpf
Parameter Name :
PAR_VQ_RXQUAL_VS_RXFER
Parameter PAR_VQ_RX contains the value of the parameter VQ_RXQUAL_VS_RXFER for the concerned cell. VQ_RXQUAL_VS_RXFER is a Radio quality threshold to specify correlation between quality samples for Voice Quality statistics. Min = 0, Max = 7 External comment:
--
Measured unit:
Length 1
number
RMSpg
Parameter Name :
PAR_VQ_GOOD_RXFER
Parameter PAR_VQ_GOOD_RXFER contains the value of the parameter VQ_GOOD_RXFER for the concerned cell. VQ_GOOD_RXFER is a Radio good FER threshold to specify bad quality samples for Voice Quality statistics. External comment:
--
Measured unit:
Length 1
Edition: 13 Released
Page 408
RMSph
Evolium
Parameter Name :
PAR_VQ_BAD_RXFER
Parameter PAR_VQ_BAD_RXFER contains the value of the parameter VQ_BAD_RXFER for the concerned cell. VQ_BAD_RXFER is the Radio bad FER threshold to specify bad quality samples for Voice Quality statistics. External comment:
--
Measured unit:
Length 1
RMSpi
Parameter Name :
PAR_VQ_INTF_THRESHOLD
Parameter PAR_VQ_INTF_THRESHOLD contains the value of the parameter VQ_INTF_THRESHOLD for the concerned cell. VQ_INTF_THRESHOLD is the Radio interference threshold to detect noisy calls for Voice Quality statistics. Min = 0%, Max= 100% External comment:
--
Measured unit:
Length 1
RMSpj
Parameter Name :
PAR_VQ_FER_THRESHOLD
Parameter PAR_VQ_FER_THRESHOLD contains the value of the parameter VQ_FER_THRESHOLD for the concerned cell. VQ_FER_THRESHOLD is the Radio FER threshold to detect calls with bad speech quality for Voice Quality statistics. External comment:
--
Measured unit:
Length 1
Edition: 13 Released
Page 409
RMSpt1
Evolium
Parameter Name :
TAB_PAR_MEAS_C/I
Parameter Table of value for 9 parameters : MEAS_STAT_C_I1 to MEAS_STAT_C_I9 MEAS_STAT_C_Ii is a Threshold on radio C/I (Carrier/Interference) measurements to define bands used for Radio Measurements Statistics Min value = -63 dB, max value= 63 dB External comment:
--
Measured unit:
Length 9
dB
RMSpt2
Parameter Name :
TAB_PAR_MEAS_STAT_BFI
Parameter Table of value for 9 parameters : MEAS_STAT_BFI1 to MEAS_STAT_BFI9 MEAS_STAT_BFIi is a Threshold on successive Bad Frame Indication to define bands used for Radio Measurements Statistics. Min value =0, max value= 25 External comment:
--
Measured unit:
Length 9
number
RMSpt3
Parameter Name :
TAB_PAR_MEAS_STAT_S
Parameter Table of value for 9 parameters : MEAS_STAT_S1 to MEAS_STAT_S9 MEAS_STAT_Si is a Threshold on radio link counter to define bands used for Radio Measurements Statistics. External comment:
--
Measured unit:
Length 9
Samfr
Edition: 13 Released
Page 410
RMSpt4
Evolium
Parameter Name :
TAB_PAR_MEAS_PATH_BALANCE
Parameter Table of value for 9 parameters : MEAS_STAT_PATH_BAL1 to MEAS_STAT_PATH_BAL9 MEAS_STAT_PATH_BALi is a Threshold on path balance to define bands used for Radio Measurements Statistics. Min value =-110 dB, max value= 110 dB External comment:
--
Measured unit:
Length 9
dB
RMSpt5
Parameter Name :
TAB_PAR_MEAS_LEVEL
Parameter Table of value for 9 parameters : MEAS_STAT_LEV1 to MEAS_STAT_LEV9 MEAS_STAT_LEVi is a threshold on radio level to define bands used for Radio Measurements Statistics. Min value = -110 dBm, max value= -47 dBm External comment:
--
Measured unit:
Length 9
dBm
RMSpt6
Parameter Name :
TAB_PAR_MEAS_STAT_TA
Parameter Table of value for 9 parameters : MEAS_STAT_TA1 to MEAS_STAT_TA9 MEAS_STAT_TAi is a Threshold on Timing Advance measurements to define bands used for Radio Measurements Statistics Min value = 0 bper, max value= 63 bper External comment:
This counter is only reported for cells mapped on Evolium BTS.
Measured unit:
Length 9
bper
Edition: 13 Released
Page 411
RMSpw1
Evolium
Parameter Name :
BS_TX_PWRMAX
Parameter Value of the parameter BS_TX_PWRMAX (BTS maximum allowed transmit power). If the cell is concentric, the value of the inner or the outer zone will be reported, depending on the TRX. External comment:
--
Measured unit:
Length 1
dB
RMSpw2
Parameter Name :
MS_TX_PWRMAX
Parameter Value of the parameter MS_TX_PWRMAX (MS maximum allowed transmit power). If the cell is concentric, the value of the inner or the outer zone will be reported, depending on the TRX. External comment:
--
Measured unit:
Length 1
dBm
RMSPw3
Counter Name : MAX_POWER_PER_TRX SFD reference : 3BK 10204 0544 DTZZA ("RMS improvements") Data collection Cumulative
Release Measured object Package 1 B9 TRX
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Maximum GMSK TRX power level applied at the BTS antenna output connector in dBm. The power takes into account the different losses (cables, internal combiners) and the internal/ external leveling but it does not take into account the BS-TXPWR-MAX, attenuation required by the OMC_R. If the feature unbalancing TRX output power per BTS sector" is activated (parameter En-Unbalanced-Output-Power set to 1), the counter is set by the BTS to the power required by the BSC for the corresponding TRE (i.e. for the TRE on which is mapped that TRX). Trigger condition: Information provided by the BTS in RMS_DATA_IND message. External comment:
This counter is only reported for cells mapped on Evolium BTS.
Edition: 13 Released
Page 412
Type number: Type name: Type scope (per BSS): Candidate for Standard BSC Yes
Counter - 32
Evolium
Type limitations (per BSS): In Standard usage: None In Detailed usage: None
Type definition: Set of counters related to handovers including a change of the TCH frequency band.
C403a
Counter Name : NB_INC_EXT_TCH_HO_NEW_BAND_ATPT SFD reference : 3BK 10204 0541 DTZZA ("B8 BSC Counter and Indicator Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: Number of incoming external TCH (in HR or FR usage) handover attempts including a change of the (TCH) frequency band. Trigger condition: Whenever 48.008 HANDOVER_REQUEST_ACK is sent by the target BSC containing the 44.018HANDOVER COMMAND towards the target cell on TCH and the target and serving cell belong to different frequency bands. Remark: The change of the (TCH) frequency band for an incoming external handover can only be detected and taken into account if the adjacency link is defined in both directions. In case of multiband cells, the BCCH frequency band of the serving cell will be taken as reference. External comment:
--
Edition: 13 Released
Page 413
C403b
Counter Name : NB_INC_EXT_TCH_HO_NEW_BAND_SUCC SFD reference : 3BK 10204 0541 DTZZA ("B8 BSC Counter and Indicator Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: Number of incoming external TCH (in HR or FR usage) handover successes including a change of the (TCH) frequency band. Trigger condition: Whenever a 44.018 HANDOVER COMPLETE message is received on Abis interface from the target cell for a TCH channel that is involved in an external TCH handover with a change of the frequency band. Remark: The change of the (TCH) frequency band for an incoming external handover can only be detected and taken into account if the adjacency link is defined in both directions. In case of multiband cells, the BCCH frequency band of the serving cell will be taken as reference. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 414
C404a
Counter Name : NB_OUT_EXT_TCH_HO_NEW_BAND_ATPT SFD reference : 3BK 10204 0541 DTZZA ("B8 BSC Counter and Indicator Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: Number of outgoing external TCH (in HR or FR usage) handover attempts including a change of the (TCH) frequency band. Trigger condition: Whenever the 44.018 HANDOVER COMMAND message is sent on Abis interface on the serving channel, during an external TCH handover procedure including a change of the (TCH) frequency band. Note: This counter counts both inter-PLMN and intra-PLMN handover events. In case of multiband cells, the BCCH frequency band of the target cell will be taken as reference.
External comment:
--
Edition: 13 Released
Page 415
C404b
Counter Name : NB_OUT_EXT_TCH_HO_NEW_BAND_SUCC SFD reference : 3BK 10204 0541 DTZZA ("B8 BSC Counter and Indicator Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: Number of outgoing external TCH (in HR or FR usage) handover successes including a change of the (TCH) frequency band. Trigger condition: Whenever a 48.008 CLEAR COMMAND message with a cause value of "handover successful" is received on A interface on the serving BSC from the MSC for a TCH handover including a change of the (TCH) frequency band. Note: This counter counts both inter-PLMN and intra-PLMN handover events. In case of multiband cells, the BCCH frequency band of the target cell will be taken as reference.
External comment:
--
Edition: 13 Released
Page 416
C420a
Counter Name : NB_INC_INT_TCH_HO_NEW_BAND_ATPT SFD reference : 3BK 10204 0541 DTZZA ("B8 BSC Counter and Indicator Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: Number of incoming internal TCH (in HR or FR usage) handover attempts including a change of the (TCH) frequency band. Trigger condition: Whenever a 44.018HANDOVER COMMAND with a target cell belonging to a different frequency band is sent to the serving BTS for internal inter cell TCH handover. However, the counter is incremented in the TARGET cell, based on the target cell ID indicated by the HO Command message. In case of multiband cells, the BCCH frequency band of the target cell will be taken as reference.
Edition: 13 Released
Page 417
C420b
Counter Name : NB_INC_INT_TCH_HO_NEW_BAND_SUCC SFD reference : 3BK 10204 0541 DTZZA ("B8 BSC Counter and Indicator Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: Number of incoming internal TCH (in HR or FR usage) handover successes including a change of the (TCH) frequency band. Trigger condition: Whenever a 44.018 HANDOVER COMPLETE message is received on Abis interface from the target cell for a TCH channel that is involved in an internal inter-cell TCH handover including a change of the (TCH) frequency band. In case of multiband cells, the BCCH frequency band of the target cell will be taken as reference.
Edition: 13 Released
Page 418
C421a
Counter Name : NB_OUT_INT_TCH_HO_NEW_BAND_ATPT SFD reference : 3BK 10204 0541 DTZZA ("B8 BSC Counter and Indicator Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: Number of outgoing internal TCH (in HR or FR usage) handover attempts including a change of the (TCH) frequency band. Trigger condition: Whenever the 44.018 HANDOVER COMMAND message is sent on Abis interface on the serving channel, during an internal inter-cell TCH handover procedure including a change of the (TCH) frequency band. In case of multiband cells, the BCCH frequency band of the target cell will be taken as reference. External comment:
--
C421b
Counter Name : NB_OUT_INT_TCH_HO_NEW_BAND_SUCC SFD reference : 3BK 10204 0541 DTZZA ("B8 BSC Counter and Indicator Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: Number of outgoing internal TCH (in HR or FR usage) handover successes including a change of the (TCH) frequency band. Trigger condition: Whenever a 44.018 HANDOVER COMPLETE message is received on Abis interface from the target cell , during an internal inter-cell TCH handover including a change of the (TCH) frequency band. In case of multiband cells, the BCCH frequency band of the target cell will be taken as reference. External comment:
--
Edition: 13 Released
Page 419
Type number: Type name: Type scope (per BSS): Candidate for Standard
Counter - 33
Evolium
Type definition: Set of counters related to electromagetic emission measurements in the BTS.
E01
Counter Name : EME_PWR_GSM SFD reference : 3BK 10204 0626 DTZZA ("EME supervision") Data collection Cumulative
Release Measured object Package 1 B9 Common cell
Measured unit:
Technology
GSM
Domain: Electro-Magnetic Emission Counter definition: Average emitted power at the BTS antenna output connector for the GSM frequency band (GSM850 or E-GSM or P-GSM). Counter coded in tenth of Watt. Value 0 indicates that the TRX frequency is neither GSM850 nor E-GSM nor P-GSM band. Value FFFFh indicates overflow of the measurement period. Trigger condition: TRE collects permanently power data. At the end of each measurement period, triggered by reception of EME_DATA_REQ message from the BSC, the average emitted power is calculated and sent back to the External comment:
Counter coded in tenth of Watt. Value 0 indicates that TRX frequency is neither 900 MHz nor 850 MHz. This counter is only reported for cells mapped on Evolium BTS.
Edition: 13 Released
Page 420
E02
Counter Name : EME_PWR_DCS SFD reference : 3BK 10204 0626 DTZZA ("EME supervision") Data collection Cumulative
Release Measured object Package 1 B9 Common cell
Measured unit:
Technology
GSM
Domain: Electro-Magnetic Emission Counter definition: Average emitted power at the BTS antenna output connector for the DCS frequency band (DCS1800 or DCS1900). Counter coded in tenth of Watt. Value 0 indicates that the TRX frequency is neither DCS1800 nor DCS1900 band. Value FFFFh indicates overflow of the measurement period. Trigger condition: TRE collects permanently power data. At the end of each measurement period, triggered by reception of EME_DATA_REQ message from the BSC, the average emitted power is calculated and sent back to the External comment:
This counter is only reported for cells mapped on Evolium BTS.
Edition: 13 Released
Page 421
Type number: Type name: Type scope (per BSS): Candidate for Standard
Type limitations (per BSS): In Standard usage: None In Detailed usage: The union of all observed cells per BSS for the detailed measurement types 1, 2, 3, 4, 5, 6, 19 (if used as Detailed), 26, 28 (if used as Detailed), 29 (if used as Detailed), 31, 34 (if used as Detailed) must not exceed 40 cells. Type definition: Set of counters related to Voice Group Call Services (VGCS).
Counter - 34
Evolium
V01
Counter Name : NB_PTP_CALL_PREEMPTED_VGCS SFD reference : 3BK 10204 0652 DTZZA ("VGCS - eMLPP improvements") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of point-to-point CS-calls pre-empted for VGC channels per cell during observation period. Trigger condition: This counter is incremented each time a 48.008 CLEAR REQUEST message is sent to the MSC under the three following conditions : - "Cause" parameter is set to "Premption (0101001)" ; - sent on a point-to-point SCCP connection, excluding the VGCS talker connexion ; - sent further to the reception and processing of either - a 48.008 VGCS/VBS ASSIGNEMENT REQUEST message received from the MSC with "Priority" parameter having the information element "Preemption Capability indicator (pci)" set to "this allocation request may preemt an existing connection (1)" ; or - a 48.008 ASSIGNEMENT REQUEST message received from the MSC with "talker flag" parameter present and with "Priority" parameter having the information element "Preemption Capability indicator (pci)" set to "this allocation request may preemt an existing connection (1)". External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3:
Edition: 13 Released
Page 422
V021
Counter Name : AV_PARALLEL_TCH_VGCS SFD reference : 3BK 10204 0652 DTZZA ("VGCS - eMLPP improvements") Data collection Status Inspection (polling=10s)
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
External comment:
--
Domain: Resource Availability & Usage Counter definition: Average number of parallel TCH in use for VGCS per cell during observation period. TCH used for VGC listening service and TCH used for VGC talking service are both counted. Trigger condition: The BSC takes periodically a sample of the number of busy TCH radio timeslots allocated for VGCS. The sampling period is set to the value indicated in the Status Inspection field. At the expiry of the accumulation period, all samples are averaged with an accuracy of 0.1 (i.e. summed, multiplied by 10 and divided by the number of samples). The averaged value is rounded up or down to the nearest value. Note : The reported value shall then be divided by 10 so that the value that is taken into acount (interger and decimal parts) is the correct one.
Edition: 13 Released
Page 423
V022
Counter Name : MAX_PARALLEL_TCH_VGCS SFD reference : 3BK 10204 0652 DTZZA ("VGCS - eMLPP improvements") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
External comment:
--
Domain: Resource Availability & Usage Counter definition: Maximum number of parallel TCH in use for VGCS per cell during observation period. TCH used for VGC listening service and TCH used for VGC talking service are both counted. Trigger condition: Whenever a TCH radio timeslot is allocated for VGCS, the BSC determines the current number of busy TCH radio timeslots allocated to VGCS. This counter is the maximum value of this number during the accumulation period. Note: both talker TCH and listener TCH are counted.
V03
Counter Name : NB_VGCS_ESTABLISHMENT_REQ SFD reference : 3BK 10204 0652 DTZZA ("VGCS - eMLPP improvements") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of VGC establishment requests per cell during observation period. Trigger condition: This counter is incremented each time the BSS receives a 48.008 VGCS/VBS ASSIGNMENT REQUEST from the MSC. External comment:
--
Edition: 13 Released
Page 424
V04
Counter Name : NB_VGCS_ESTABLISHMENT_SUCC SFD reference : 3BK 10204 0652 DTZZA ("VGCS - eMLPP improvements") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of successfully established VGC per cell during observation period. Trigger condition: This counter is incremented each time the BSS sends the first 48.008 VGCS/VBS ASSIGNMENT RESULT to the MSC corresponding to a VGCS/VBS ASSIGNMENT REQUEST. External comment:
--
V05
Counter Name : NB_CM_SERV_REQ_VGCS SFD reference : 3BK 10204 0652 DTZZA ("VGCS - eMLPP improvements") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of received CM_SERVICE-REQ for VGC per cell during observation period. Trigger condition: This counter is incremented each time the BSS receives a CM SERVICE REQUEST message with parameter CM Service Type set to "Voice group call establishment (1001)". External comment:
--
Edition: 13 Released
Page 425
V06
Counter Name : NB_VGC_RELEASED_VGCS SFD reference : 3BK 10204 0652 DTZZA ("VGCS - eMLPP improvements") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of released VGC per cell during observation period. Trigger condition: This counter is incremented each time a 48.008 CLEAR COMMAND is received from the MSC on the VGCS resource controlling SCCP connection, i. e. on the SCCP connection initiated with VGCS/VBS ASSIGNMENT REQUEST. External comment:
--
V07
Counter Name : NB_OUT_VGCS_HO_ATPT SFD reference : 3BK 10204 0652 DTZZA ("VGCS - eMLPP improvements") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of outgoing handover attempts for VGC-talker per cell during observation period. Intracell, internal intercell and external handovers are counted together. Trigger condition: Internal intercell HO, external HO : This counter is incremented each time the 44.018 HANDOVER COMMAND message is sent to the MS on the serving channel, during a TCH handover procedure for a VGCS talker. Intracell HO : This counter is incremented each time a 44.018 ASSIGNMENT COMMAND message is sent to the MS for a TCH handover procedure for a VGCS talker.
External comment:
--
Edition: 13 Released
Page 426
V08
Counter Name : NB_OUT_VGCS_HO_SUCC SFD reference : 3BK 10204 0652 DTZZA ("VGCS - eMLPP improvements") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
External comment:
--
Domain: Traffic Load Counter definition: Number of successful outgoing handover for VGC-talker per cell during observation period. Intracell, internal intercell and external handovers are counted together. Trigger condition: This counter is incremented in following cases : 1) External HO: whenever 48.008 CLEAR COMMAND (cause="handover successful") is received on the serving BSC on the channel of the CGCS talker ; 2) Internal inter-cell HO: whenever 44.018 HANDOVER COMPLETE is received from the MS via the target cell on the channel of the VGCS talker ; 3) Internal intra-cell HO: whenever 44.018 ASSIGNMENT COMPLETE is received from the MS via the cell on the channel of the VGCS talker.
Edition: 13 Released
Page 427
V09
Counter Name : NB_INC_VGCS_HO_SUCC SFD reference : 3BK 10204 0652 DTZZA ("VGCS - eMLPP improvements") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of successful incoming handover for VGC-talker per cell during observation period. Since there are no reliable means at the target BSC to distinguish external directed retry from external handover, the external directed retries are counted by this counter. Intracell handover are not counted. Trigger condition: This counter is incremented for internal inter-cell or external handover, i. e. : whenever a 44.018 HANDOVER COMPLETE message is received from the MS in the target cell for the channel of the VGCS External comment:
--
Edition: 13 Released
Page 428
V10
Counter Name : NB_INC_VGCS_HO_ATPT SFD reference : 3BK 10204 0652 DTZZA ("VGCS - eMLPP improvements") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of incoming handover attempts for VGC-talker per cell during observation period. Intracell, internal intercell and external handovers are counted together. Intracell handover are not counted. Trigger condition: External handover : Whenever 48.008HANDOVER REQUEST ACK is sent by the target BSC containing the 44.018HANDOVER COMMAND towards the target cell on TCH, for a VGC-talker. Internal intercell handover : Whenever a 44.018HANDOVER COMMAND is sent to the serving BTS for internal inter cell TCH handover, for a VGC talker. However, the counter is incremented in the TARGET cell, based on the target cell ID indicated by the HO Command message.
External comment:
--
Edition: 13 Released
Page 429
V11
Counter Name : NB_TALKER_CHANGE_VGCS SFD reference : 3BK 10204 0652 DTZZA ("VGCS - eMLPP improvements") Data collection Cumulative
Release Measured object Package 2 B9 BSC
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of talker change in the BSC during observation period. This counter is the TOTAL number of talker change in the BSC during the observation period. Trigger condition: This counter is increment each time the BSC sends a 48.008 UPLINK REQUEST CONFIRMATION message to the MSC. External comment:
--
Edition: 13 Released
Page 430
V12
Counter Name : NB_VGC_BLOCKED_VGCS SFD reference : 3BK 10204 0652 DTZZA ("VGCS - eMLPP improvements") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of blocked VGC due to lack of resources per cell during observation period. Trigger condition: This counter is incremented when the BSC cannot allocate the VGCH, i. e. sends to the MSC: - The 48.008 VGCS/VBS ASSIGNMENT FAILURE message with cause parameter set to "Resource unavailable (010)" whenever 1/ no TCH is available and either: - queuing was not requested by the MSC (parameter "priority.qa" set to "queuing not allowed 0") in case of immediate allocation (parameter "assignment requirement" set to "immediate and the resources shall not be de-allocated until the end of the call (channel establishment on demand forbidden by the MSC) 00000001" or "immediate and the resources may further be de-allocated by the BSS (channel establishment on demand forbidden by the MSC) 00000010" ; - queuing was requested by the MSC (parameter "priority.qa" set to "queuing allowed 1") but disabled in the BSC ; - queuing was requested by the MSC but the queue is full and no request of lower priority can be dequeued ; - the request is dequeued due to the reception of higher priority request ; - the request is dequeued due to T14 timer expiry ; 2/ the maximum number of TCH allowed for VGCs has been reached ; - the 48.008 CLEAR REQUEST message with cause parameter set to "resource unavailable 010" in case of delayed allocation for a VGCH (i. e. sent over an SCCP connection previously established with a 48.008 VGCS/VBS ASSIGNMENT REQUEST message with parameter "assignment requirement" set to "delay allowed 00000000" and parameter "priority.qa" set to "queuing not allowed 0", whenever no more TCH is available or the maximum number of TCH allowed for VGCs has been reached. External comment:
--
Edition: 13 Released
Page 431
V13
Counter Name : NB_VGCS_NOTIFIFICATION_FACCH SFD reference : 3BK 10204 0652 DTZZA ("VGCS - eMLPP improvements") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of VGC notifications sent over FACCH per cell during observation period. Trigger condition: This counter is incremented each time the BSC sends a 48.058 UNIT DATA REQUEST (NOTIFICATION/FACCH) message to the BTS with the indication "Group Call Information". Note : this counter does not include paging requests. External comment:
--
V14
Counter Name : NB_ASS_REQ_ABLE_PREEMT SFD reference : 3BK 10204 0652 DTZZA ("VGCS - eMLPP improvements") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: Number of ASSIGNEMENT REQUEST able to pre-empt per cell during observation period. Trigger condition: This counter is incremented each time the BSC receives a 48.008 ASSIGNEMENT REQUEST message with "Preemption Capability indicator (pci)" of "Priority" parameter set to "this allocation request may preempt an existing connection (1)". Notes : 1) This counter is not limited to VGC, so it also counts messages related to point-to-point calls. 2) Repetitions of the ASSIGNMENT REQUEST message in case of channel modification are not counted.
Edition: 13 Released
Page 432
V15
Counter Name : NB_VGCS_ASS_REQ_ABLE_TO_PREEMPT SFD reference : 3BK 10204 0652 DTZZA ("VGCS - eMLPP improvements") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of VGCS/VBS ASSIGNEMENT REQUEST able to pre-empt per cell during observation period. Trigger condition: This counter is incremented each time the BSC receives from the MSC a VGCS/VBS ASSIGNEMENT REQUEST message with "Preemption Capability indicator (pci)" of "Priority" parameter set to "this allocation request may preempt an existing connection (1)". External comment:
--
V16
Counter Name : NB_VGCS_QUEUED SFD reference : 3BK 10204 0652 DTZZA ("VGCS - eMLPP improvements") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of VGC queued per cell during the polling period. Trigger condition: This counter is incremented each time a VGCS/VBS QUEUING INDICATION message is sent to the MSC. External comment:
--
Edition: 13 Released
Page 433
V17
Counter Name : NB_VGCS_ESTABLISHED SFD reference : 3BK 10204 0652 DTZZA ("VGCS - eMLPP improvements") Data collection Cumulative
Release Measured object Package 2 B9 BSC
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of VGC successfully established per BSC during the observation period. Trigger condition: This counter is incremented each time the BSC sens a 48.008 VGCS/VBS SETUP ACKNOWLEDGE message to the MSC. External comment:
--
V18
Counter Name : NB_PREEMTED_TCH_VGCS SFD reference : 3BK 10204 0652 DTZZA ("VGCS - eMLPP improvements") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: Number of pre-empted TCHper cell during observation period. Trigger condition: This counter is incremented each time a 48.008 CLEAR REQUEST or a 48.008 UPLINK RELEASE INDICATION with parameter "Cause" set to "pre-emption (0101001)" is sent to the MSC. Note 1: Any pre-empted TCH is counted (i. e. point-to-point call TCH, VGC talker TCH, VGC listener TCH). Note 2: Whatever the TCH is pre-emted for (point-to-point call TCH, VGC talker TCH, VGC listener TCH), the counter is incremented.
Edition: 13 Released
Page 434
V19
Counter Name : NB_PAGING_FACCH SFD reference : 3BK 10204 0652 DTZZA ("VGCS - eMLPP improvements") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of PTP pagings sent over FACCH per cell during observation period. Trigger condition: This counter is incremented each time the BSC sends a 48.058 UNIT DATA REQUEST (NOTIFICATION/FACCH) message to the BTS with the indication "Paging Information". Note : this counter does not include notification of VGCS. External comment:
--
V20
Counter Name : VGCS20 SFD reference : 3BK 10204 0652 DTZZA ("VGCS - eMLPP improvements") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
Domain: Not displayed Counter definition: Provision for VGCS Trigger condition: -External comment:
--
Edition: 13 Released
Page 435
Type number: Type name: Type scope (per BSS): Candidate for Standard BSC Yes
Overview measurements
Counter - 110
Evolium
Type definition: Set of global counters providing an overview of each measurement type
MC01
Counter Name : NB_IMM_ASS_SUCC_MT SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of immediate assignment plus SDCCH normal assignment successes for Mobile Terminating procedure. Trigger condition: Whenever an 48.058 ESTABLISH INDICATION message is received from a CELL, with the L3_INFORMATION field including a 44.018 PAGING RESPONSE message. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Success
Edition: 13 Released
Page 436
MC02
Counter Name : NB_IMM_ASS_SUCC_MO SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of immediate assignment successes for Mobile Originating procedure.
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Success
MC02 = C02 = C02a+C02b+C02c+C02d+C02e+C02f+C02g+C02h+C02i. The following counters C02a/b/c/d/e/f/g/h/i provide the distribution of the MO telecom procedures on Trigger condition: External comment:
--
MC02a
Counter Name : NB_IMM_ASS_SUCC_MO_LOC_UPD SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: case: Location Update request (except the "follow on" procedure) Trigger condition: Whenever an 48.058 ESTABLISH INDICATION message is received from a cell, with the L3 INFORMATION field containing a 44.018 L3 message with an MIE message type set to LOCATION UPDATING REQUEST and with an MIE Location updating type not set to a RESERVED value and a bit FOR set to 0.
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Success
Edition: 13 Released
Page 437
MC02b
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: case: SMS procedure on SDCCH Trigger condition: Whenever an 48.058 ESTABLISH INDICATION message is received from a CELL, with the L3 INFORMATION field containing a 44.018 L3 message with an MIE message type set to CM SERVICE REQUEST and with an MIE CM service type set to "SMS". This counter is incremented only if the L3 info message received has to be forwarded to the MSC.
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Success
MC02c
Counter Name : NB_IMM_ASS_SUCC_MO_SUP_SERV SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: case: Supplementary Service Trigger condition: Whenever an 48.058 ESTABLISH INDICATION message is received from a CELL, with the L3 INFORMATION field containing a 44.018 L3 message with an MIE message type set to CM SERVICE REQUEST and with an MIE CM service type set to "Supplementary Service". This counter is incremented only if the L3 info message received has to be forwarded to the MSC.
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Success
Edition: 13 Released
Page 438
MC02d
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: case: Location Update request ("follow on" procedure) Trigger condition: Whenever an 48.058 ESTABLISH INDICATION message is received from a CELL, with the L3 INFORMATION field containing a 44.018 L3 message with an MIE message type set to LOCATION UPDATING REQUEST and with an MIE Location updating type not set to a RESERVED value and a bit FOR set to 1.
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Success
MC02e
Counter Name : NB_IMM_ASS_SUCC_MO_CM_REEST SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: case: CM Re-establishment procedure Trigger condition: Whenever an 48.058 ESTABLISH INDICATION message is received from a CELL, with the L3 INFORMATION field containing a 44.018 L3 message with an MIE message type set to CM RE-ESTABLISHMENT REQUEST message. This counter is incremented only if the L3 info message received has to be forwarded to the MSC.
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Success
Edition: 13 Released
Page 439
MC02f
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: MC02f=C02f, number of immediate assignment successes for Mobile Originationg procedure, in case of L3 Info (within 48.058 ESTABLISH INDICATION) unknown by the BSC but transferred to the MSC. Trigger condition: External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Success
MC02g
Counter Name : NB_IMM_ASS_SUCC_MO_IMSI_DETACH SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: MC02g=C02g, number of immediate assignment successes for Mobile Originationg procedure, in case of IMSI Detach Indication. Trigger condition: Whenever an 48.058 ESTABLISH INDICATION message is received from a CELL, with L3_INFORMATION field containing a 44.018 L3 message with an MIE message type set to IMSI DETACH INDICATION. This counter is incremented only if the L3 info message received has to be forwarded to the MSC. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Success
Edition: 13 Released
Page 440
MC02h
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: case: normal or emergency call establishment Trigger condition: Whenever an 48.058 ESTABLISH INDICATION message is received from a CELL, with the L3 INFORMATION field containg a 44.018 L3 message with an MIE message type set to CM SERVICE REQUEST and an MIE CM service type set to either : - "emergency call establishment", - or "mobile originating call establishment" This counter is incremented only if the L3 info message received has to be forwarded to the MSC.
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Success
Edition: 13 Released
Page 441
MC02i
Counter Name : NB_IMM_ASS_SUCC_MO_LCS SFD reference : 3BK 10204 0540 DTZZA ("Location services (LCS)") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: case: Mobile originated LCS procedure on SDCCH Trigger condition: Whenever an 48.058 ESTABLISH INDICATION message is received from a cell, with the L3 INFORMATION field containing a 44.018 L3 message with an MIE message type set to CM SERVICE REQUEST and with an MIE CM service type set to "Location Services" (LCS). This counter is incremented only if the L3 info message received has to be forwarded to the MSC
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Success
MC03
Counter Name : NB_OUT_SDCCH_HO_SUCC SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: MC03=C03, Number of outgoing SDCCH handover (any kind) successes. Trigger condition: External SDCCH handover: whenever 48.008 CLEAR COMMAND (cause= "handover successful") is received on the serving BSC on the SDCCH channel. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 442
MC04
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: MC04=C04, number of immediate assignment preparation failures due to congestion. Trigger condition: All SDCCH sub-channels in the required cell were either Busy or Out of Service, when the 48.058 CHANNEL REQUIRED message was received. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Failure
MC07
Counter Name : NB_SDCCH_DROP_OUT_HO SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: MC07=C07, Number of SDCCH drops during any outgoing SDCCH handover. Trigger condition: Internal inter-cell SDCCH handover: whenever the timer supervising the handover procedure (T3103) External comment:
--
Edition: 13 Released
Page 443
MC10
Counter Name : NB_INC_SDCCH_HO_SUCC SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: MC10=C10, Number of incoming SDCCH handover (any kind) successes. Trigger condition: Internal inter-cell or external SDCCH handover: whenever a 44.018 HANDOVER COMPLETE message is received on Abis interface from the target cell for an SDCCH Sub-channel. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
MC101
Counter Name : NB_INTRA_SDCCH_HO_PREP_FAIL_CONG SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: MC101=C101, Number of intra-cell SDCCH handover -preparation failures due to congestion. Trigger condition: Whenever a internal intra-cell SDCCH handover cannot be performed, because there is no free SDCCH Sub-channel to allocate the handover to. External comment:
--
Edition: 13 Released
Page 444
MC1040
Counter Name : NB_HO_ATPT_23_TrafHandover SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
MC1044
Counter Name : NB_HO_ATPT_24_gencapture SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Edition: 13 Released
Page 445
MC1050
Counter Name : NB_HO_22_TooShortDistance SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
MC137
Counter Name : NB_SDCCH_DROP_EST_PHAS_BSS_PB SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: MC137=C137, Number of SDCCH drops in SDCCH established phase due to BSS problem.It may happen that several causes of failures mentioned below are detected consecutively. In that case, the counter will only be incremented once, as soon as the call is released. Trigger condition: 1) LapD failure detected during the stable phase of an SDCCH transaction. 2) SDCCH was released due to 48.058 ERROR REPORT with any cause value being received during the stable phase of an SDCCH transaction. 3) Telecom Supervisory module caused the call to be cleared. 4) SDCCH was released due to 0180 CLEAR_CMD message being received from BSSAPduring the stable phase of an SDCCH transaction : O&M has disabled the DTC
Sub domain-1: Established Phase Sub domain-2: SDCCH Sub domain-3: Failure
Edition: 13 Released
Page 446
MC138
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: Number of SDCCH drops on SDCCH established phase due to radio link failure (radio link timeout or Lapdm timer expiry). Trigger condition: 1) Whenever a 48.058 CONNECTION FAILURE INDICATION message with a cause value of "radio link failure" is received on Abis interface for an SDCCH channel. 2) Whenever an 48.058 ERROR INDICATION message is received on Abis interface and leads to a loss of channel.
Sub domain-1: Established Phase Sub domain-2: SDCCH Sub domain-3: Failure
Edition: 13 Released
Page 447
MC13a
Counter Name : NB_TCH_NOR_ASS_QUEUED SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Traffic Load Counter definition: Number of TCH (in HR or FR usage) normal assignment requests that are put in BSC queue. Trigger condition: Further to the receipt of a 48.008 ASSIGNMENT REQUEST message for TCH, the counter is incremented: i) upon the sending of a 48.008 QUEUING INDICATION message if the queuing is authorised by the MSC, or, ii) when the assignment request is queued in the cell if the queuing is not authorised by the MSC and the parameter QUEUE_ANYWAY is set, or, iii) when the assignment request is queued in the cell if the queuing is not authorised by the MSC and the request has its pre-emption indicator set (provided that the flag EN_TCH_PREEMPT is set to 'Enable'). External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3:
Edition: 13 Released
Page 448
MC13b
Counter Name : NB_INC_EXT_TCH_HO_QUEUED SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Traffic Load Counter definition: Number of TCH (in HR or FR usage) incoming external handover requests that are put in BSC queue Trigger condition: Further to the receipt of a 48.008 HANDOVER REQUEST message for TCH, the counter is incremented: i) upon the sending of a 48.008 QUEUING INDICATION message if the queuing is authorised by the MSC, or, ii) when the handover request is queued in the cell if the queuing is not authorised by the MSC and the request has its pre-emption indicator set (provided that the flag EN_TCH_PREEMPT is set to 'Enable'). Note: MC13b = C13b External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Handover Sub domain-3: TCH
Edition: 13 Released
Page 449
MC140a
Counter Name : NB_TCH_NOR_ASS_REQ SFD reference : 3BK 10204 0541 DTZZA ("B8 BSC Counter and Indicator Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: Number of normal assignment requests for TCH establishment (in HR or FR usage). Trigger condition: Whenever an 48.008 ASSIGNMENT REQUEST message for a normal TCH assignment is received from the MSC External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3:
MC140b
Counter Name : NB_TCH_NOR_ASS_ATPT SFD reference : 3BK 10204 0541 DTZZA ("B8 BSC Counter and Indicator Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: Number of normal assignment attempts for TCH establishment (in HR or FR usage). Trigger condition: Whenever an 44.018 ASSIGNMENT COMMAND message for a normal TCH assignment is sent to the MS; In case of multiband cell, only the first 44.018 ASSIGNMENT COMMAND message is counted (when sent in the inner zone); the second 44.018 ASSIGNMENT COMMAND message sent in the outer zone (further to
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3:
External comment:
--
Edition: 13 Released
Page 450
MC141
Counter Name : AV_NB_TCH_QUEUED SFD reference : No reference. Data collection Status Inspection (polling=10s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
External comment:
--
Domain: Resource Availability & Usage Counter definition: Average number of queued TCH (in HR or FR usage) normal assignment or external handover requests. Trigger condition: At Accumulation Period expiry, all observations of this counter done at each polling period are averaged, i.e. summed and divided by the number of observations. In order to provide one decimal place, the averaged value (real) is multiplied by ten and then rounded up or down to the nearest integer value. Note that the counter value that is indicated in the ASCII file, which can be obtained via the OBSYNT interface, still has to be divided by 10, whereas the value that is provided at the user interface is the correct
MC142e
Counter Name : NB_OUT_IDR_SUCC SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: MC142e=C142a+C142c Trigger condition: External comment:
--
Sub domain-1: Directed Retry Sub domain-2: Internal Sub domain-3: Success
Edition: 13 Released
Page 451
MC142f
Counter Name : NB_OUT_EDR_SUCC SFD reference : 3BK 10204 0165 DSZZA ("External Directed Retry") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: MC142f=C142b+C142d Trigger condition: External comment:
--
Sub domain-1: Directed Retry Sub domain-2: Internal Sub domain-3: Failure
MC144e
Counter Name : NB_OUT_IDR_REQ SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: MC144e=C144a+C144c Trigger condition: External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Directed Retry Sub domain-3: Internal
Edition: 13 Released
Page 452
MC144f
Counter Name : NB_OUT_EDR_REQ SFD reference : 3BK 10204 0165 DSZZA ("External Directed Retry") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: MC144f=C144b+C144d Trigger condition: External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Directed Retry Sub domain-3: External
MC147
Counter Name : NB_INC_SDCCH_HO_ALLOC SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: MC147=C147, Number of incoming internal or external SDCCH handovers -whose target SDCCH channel is allocated by the BSC. Trigger condition: Whenever a 48.058 CHANNEL ACTIVATION message is about to be sent on Abis Interface to activate an SDCCH channel for any handover purposes. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Handover Sub domain-3: SDCCH
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 453
MC148
Counter Name : NB_IMM_ASS_ALLOC SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of immediate assignment plus SDCCH normal assignments -whose SDCCH channel is allocated by the BSC. Trigger condition: Whenever a 48.058 CHANNEL ACTIVATION message is about to be sent on Abis Interface to activate an SDCCH channel for any purpose other than handover. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3:
MC149
Counter Name : NB_IMM_ASS_EXEC_FAIL_RADIO SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of immediate assignment -execution failures due to MS access problem. Trigger condition: Whenever the timer supervising the Immediate Assignment Procedure (T3101) expires during the establishment of an SDCCH sub-channel. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Immediate Assignment Sub domain-3: Failure
Edition: 13 Released
Page 454
MC14a
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of TCH (in HR or FR usage) drops due to BSS problem during any TCH handover preparation and execution phases. This counter is incremented on the cell on which the problem occurs(In the case of internal inter-cell handovers, it is not incremented on both serving and target cell). For problems that are not related to a specific cell, the counter related to the serving cell will be incremented. It may happen that several causes of failures mentioned below are detected consecutively. In that case, the counter will only be incremented once, as soon as the handover procedure fails. Trigger condition: 1) Whenever the BSC receives on Abis interface from the target cell negative acknowledgment to the TCH channel activation involved in the handover procedure. 2) Whenever the timer supervising the Channel Activation procedure (T9103) expires on the target cell during activation of a TCH channel involved in the handover procedure. 3) Whenever an 48.058 ERROR REPORT message with a cause value of "O&M intervention" is received on Abis interface from either the serving or the target cell during the external or internal inter-cell handover procedure and leads to a transaction failure. 4) Whenever an 48.058 ERROR REPORT message with a cause value of "O&M intervention" is received on Abis interface on either the old or the new channel during the internal intra-cell handover procedure and leads to a transaction failure. 5) Whenever an 48.058 ERROR REPORT message on SAPI 0 with a cause value of "message sequence error" is received on Abis interface from the serving cell between the sending of the 48.058 CHANNEL ACTIVATION message and the reception of the 48.058 CHANNEL ACTIVATION ACKNOWLEDGMENT during the internal inter-cell TCH handover and leads to a transaction failure. 6) Whenever an 48.058 ERROR REPORT message on SAPI 0 with a cause value of "message sequence error" is received on Abis interface on the old channel between the sending of the 48.058 CHANNEL ACTIVATION message and the reception of the 48.058 CHANNEL ACTIVATION ACKNOWLEDGE during the internal intra-cell TCH handover and leads to a transaction failure. 7) Whenever a LAPD failure related to either serving or target cell is reported to the Layer 3 of the BSC (for an RSL supporting a TCH transaction for handover purpose) and leads to a transaction failure. 8) Whenever an TCH handover abortion is initiated by the BSS O&M FAULT MANAGEMENT application part or by the BSS TELECOM application part as the result of a system defense action which may be due to BSS equipment failures external to the BSC (e.g. RSL failure or CU recovery failure), or due to BSC internal hardware problems (e.g. TCU failure or DTC failure) or due to BSC internal software problems (e.g. inconsistencies detected between software modules or lack of software resources (memory, timer reference, file reference...) or communication problems between different processor boards). 9) Whenever a 48.058 CONNECTION FAILURE INDICATION message with a cause value of "remote transcoder failure" is received on Abis interface from the old channel between the sending of the 48.058 CHANNEL ACTIVATION message and the reception of the 48.058 CHANNEL ACTIVATION ACKNOWLEDGE during an internal intra-cell or inter-cellTCH handover procedure and leads to a transaction failure. Notes : 1. TCH handover failures which are due to O&M operator actions on BTS or BSC should not be counted. Indeed, in case of numerous failures due to O&M commands, this counter will overestimate failures which are due to problems which are internal to the BSS. However, due to the current implementation which does not allow to be aware of the origin of the failure, O&M operator actions will also be counted. 2. It may happen that the counter can not be incremented since it is implemented within the faulty entity.
Edition: 13 Released BSC Counters Catalogue - B9 3BK 11203 0102 DSZZA
Page 455
Evolium
External comment:
--
mechanism:
unit: :
MC14c
Counter Name : : Integer SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
NB_TCH_DROP_EST_PHAS_BSS_PB Counter
Measured unit:
Length 4
number
Technology
GSM
Domain: Quality of Service Counter definition: Number of TCH (in HR or FR usage) drops in TCH established phase due to BSS problem. It may happen that several causes of failures mentioned below are detected consecutively. In that case, the counter will only be incremented once, as soon as the call is released. Trigger condition: 1) Whenever an 48.058 ERROR REPORT message with a cause value of "O&M intervention" is received on Abis interface after TCH seizure and leads to a loss of call. 2) Whenever an 48.058 ERROR REPORT message on SAPI 0 with a cause value of "message sequence error" is received on Abis interface after TCH seizure and leads to a loss of call. 3) Whenever a LAPD failure is reported to the Layer 3 of the BSC (for an RSL supporting a TCH transaction after successful TCH seizure) and leads to a loss of call. 4) Whenever a TCH call release is initiated by the BSS O&M FAULT MANAGEMENT application part or by the BSS TELECOM application part as the result of a system defense action which may be due to BSS equipment failures external to the BSC (e.g. RSL failure or CU recovery failure), or due to BSC internal hardware problems (e.g. TCU failure or DTC failure) or due to BSC internal software problems (e.g. inconsistencies detected between software modules or lack of software resources (memory, timer reference, file reference...) or communication problems between different processor boards). Notes : 1. TCH call releases which are due to O&M operator actions on BTS or BSC should not be counted. Indeed, in case of numerous failures due to O&M commands, this counter will overestimate failures which are due to problems which are internal to the BSS. However, due to the current implementation which does not allow to be aware of the origin of the failure, O&M operator actions will also be counted. 2. It may happen that the counter can not be incremented since it is implemented within the faulty entity. External comment:
--
Sub domain-1: Established Phase Sub domain-2: TCH Sub domain-3: Failure
Edition: 13 Released
Page 456
MC151
Counter Name : NB_INC_IDR_SUCC (29) SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of incoming internal directed retry (forced or normal, towards a TCH channel in HR or FR usage) successes. Trigger condition: Whenever 44.018HANDOVER COMPLETE is received from the MS via the target cell, for a forced or internal internal directed retry procedure. External comment:
--
Sub domain-1: Directed Retry Sub domain-2: Internal Sub domain-3: Incoming
MC153
Counter Name : NB_INC_IDR_REQ SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: MC153=C153, Number of incoming internal directed retry (forced or normal) requests. The target TCH channel can be in HR or FR usage. Trigger condition: Whenever the BSC process responsible for handover procedure selects the target cell for forced or normal internal directed retry. External comment:
--
Sub domain-1: Directed Retry Sub domain-2: Internal Sub domain-3: Incoming
Edition: 13 Released
Page 457
MC15a
Counter Name : NB_INC_IDR_ALLOC SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Traffic Load Counter definition: MC15a=C15a, Number of incoming internal directed retry (towards a TCH channel in HR or FR usage) whose target channel is allocated by the BSC. Trigger condition: The counter is incremented on the target cell whenever the 48.058 CHANNEL ACTIVATION message of a TCH channel is about to be sent during an internal directed retry. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Directed Retry Sub domain-3: Internal
Edition: 13 Released
Page 458
MC15b
Counter Name : NB_INC_TCH_HO_ALLOC SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Traffic Load Counter definition: Number of incoming TCH (in HR or FR usage) handover (internal or external) -whose target channel is allocated by the BSC. Since there are no reliable means at the target BSC to distinguish external directed retry from external handover, the external directed retries are counted by this counter. Trigger condition: The counter is incremented on the target cell whenever the 48.058 CHANNEL ACTIVATION message of a TCH channel is about to be sent during any handover procedure. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Handover Sub domain-3: TCH
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
MC161
Counter Name : NB_DTAP_NOR_ASS_SUCC SFD reference : RFD 3BKA55CBR035191 Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: MC161 = C161a + C161b Trigger condition: Whenever a 44.018 CONNECT ACK is received on Abis interface. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: DTAP Assignment Sub domain-3: Success
Edition: 13 Released
Page 459
MC162
Counter Name : NB_TCH_DROP_DTAP_EST_PHAS SFD reference : RFD 3BKA55CBR035191 Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: MC162 = C162a + C162b + C162c Trigger condition: External comment:
--
Sub domain-1: Established Phase Sub domain-2: TCH Sub domain-3: Failure
Edition: 13 Released
Page 460
MC170
Counter Name : NB_CALL_TFO SFD reference : 3BK 10204 0478 DTZZA ("Tandem Free Operation") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of TCHs assigned in the serving cell for which TFO has been successfully established. Trigger condition: For each assigned TCH, the counter is incremented the first time a 48.058 TFO REPORT message is received by the BSC, indicating that TFO is established (i.e. TFO = 1 in the TFO Status IE). Note 1: This counter shall be incremented only once per assigned TCH (i.e. the first time it is received for the assigned TCH). Note 2: A TCH is seen as assigned in the serving cell between the sending of 48.058 CHANNEL ACTIVATION message and the receipt of the 48.058 RF CHANNEL RELEASE message. This means that the counter can be incremented either if the TCH is assigned to serve a normal assignment or if the TCH is assigned to serve an incoming internal (inter-cell or intra-cell) or external handover. External comment:
--
Edition: 13 Released
Page 461
MC19
Counter Name : NB_TCH_NOR_ASS_HO_PREP_FAIL_ACHAN_MIS SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object BSC BSC Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: Number of TCH (in HR or FR usage) normal assignment and external handover -preparation failures due to A-channel status mismatch between the BSC and the MSC. Trigger condition: 1) Whenever an 48.008 ASSIGNMENT REQUEST message selects a TTCH which is found to be unavailable by the BSS (Blocked or Busy). 2) Whenever a 48.008 HANDOVER REQUEST message selects a TTCH which is found to be unavailable by the BSS (Blocked or Busy). External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3: Failure
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
MC196
Counter Name : NB_SMS_PP_CON_SUCC SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: MC196=C190+C191+C192+C193 Trigger condition: External comment:
--
Sub domain-1: Short Message Service Sub domain-2: Point to Point Sub domain-3: Success
Edition: 13 Released
Page 462
MC197
Counter Name : NB_SMS_PP_CON_FAIL SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: MC197=C194a+C194b+C194c+C195 Trigger condition: External comment:
--
Sub domain-1: Short Message Service Sub domain-2: Point to Point Sub domain-3: Failure
MC24
Counter Name : AV_NB_NOT_AVAIL_TRX_TS SFD reference : No reference. Data collection Status Inspection (polling=20s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of not available radio timeslots (TRX_TS). Trigger condition: At Accumulation Period expiry, all observations of this counter done at each polling period are averaged, i.e. summed and divided by the number of observations. The averaged value (real) is rounded up or down to the nearest integer value. External comment:
--
Edition: 13 Released
Page 463
MC250
Counter Name : AV_NB_AVAIL_TCH SFD reference : No reference. Data collection Status Inspection (polling=20s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of available TCH/PDCH timeslots for traffic usage (i.e. TCH (for HR or FR usage) or Trigger condition: At Accumulation Period expiry, all observations of this counter done at each polling period are averaged, i.e. summed and divided by the number of observations. The averaged value is rounded up or down to the nearest integer value. Note 1: "Available" has here to be understood as the operational state of a timeslot. The timeslot is available if it is not "blocked" or "out of service". External comment:
--
Note 2: The dynamic SDCCH timeslots are not taken into account in this counter.
Edition: 13 Released
Page 464
MC26
Counter Name : AV_NB_AVAIL_SDCCH SFD reference : No reference. Data collection Status Inspection (polling=20s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of available static SDCCH sub-channels (i.e. on static SDCCH timeslots). Trigger condition: At Accumulation Period expiry, all observations of this counter done at each polling period are averaged, i.e. summed and divided by the number of observations. The averaged value (real) is rounded up or down to the nearest integer value. Note: "Available" has here to be understood as the operational state of a timeslot. The timeslot is available if it is not "blocked" or "out of service".
External comment:
--
MC27
Counter Name : AV_NB_AVAIL_CCCH SFD reference : No reference. Data collection Status Inspection (polling=20s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of available CCCH channels. Trigger condition: At Accumulation Period expiry, all observations of this counter done at each polling period are averaged, i.e. summed and divided by the number of observations. The averaged value (real) is rounded up or down to the nearest integer value. External comment:
--
Edition: 13 Released
Page 465
MC28a
Counter Name : AV_NB_BUSY_CS_TS SFD reference : No reference. Data collection Status Inspection (polling=10s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of busy TCH radio timeslot (in FR or HR usage) and busy dynamic SDCCH/8 radio timeslot allocated as TCH. Trigger condition: The BSC takes periodically a sample of the number of busy TCH radio timeslots and busy dynamic SDCCH/8 radio timeslots allocated as TCH. The sampling period is set to the value indicated in the Status Inspection field. At the expiry of the accumulation period, all samples are averaged (i.e. summed and divided by the number of samples). The averaged value is rounded up or down to the nearest value with an accuracy of 0.1. A TCH radio timeslot is considered as busy during the time it is allocated to a given MS for TCH traffic (in HR or FR usage). A dynamic SDCCH/8 timeslot allocated as TCH is considered as busy during the time it is allocated to a given MS for TCH traffic. Note 1: the counter value that is indicated in the ASCII file (which can be obtained via the OBSYNT interface) is an integer value (i.e. it is as if the BSC multiplies by 10 the average). The reported value shall then be divided by 10 afterwards so that the value that is displayed to the end-user is the correct one. Note 2: This counter does not take into account the PDCH radio timeslots allocated to the MFS. External comment:
--
Edition: 13 Released
Page 466
MC29a
Counter Name : NB_MAX_SIMUL_BUSY_CS_TS SFD reference : 3BK 10204 0511 DTZZA ("Dynamic SDCCH allocation") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Maximum number of simultaneously busy TCH radio timeslots (in HR or FR usage) and simultaneously busy dynamic SDCCH/8 radio timeslots allocated as TCH. Trigger condition: Whenever a TCH radio timeslot or a dynamic SDCCH/8 radio timeslot allocated as TCH becomes busy, the BSC determines the current number of busy TCH radio timeslots (in HR or FR usage) and busy dynamic SDCCH/8 radio timeslots allocated as TCH. This counter is the maximum value of this number during the accumulation period. External comment:
--
This counter does not take into account the PDCHs allocated to the MFS.
Edition: 13 Released
Page 467
MC31
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Maximum number of simultaneously busy SDCCH subchannels, taking into account the following SDCCH sub-channels: 1) Static SDCCH/x sub-channels, 2) Dynamic SDCCH sub-channels which are dynamically allocated on the dynamic SDCCH/8 timeslots. Trigger condition: At each 48.058 CHANNEL ACTIVATION (SDCCH subchannel) sent to the cell: C31 = MAX ["old" C31 value (i.e. before the channel activation), number of busy SDCCH subchannels observed for the cell]. External comment:
--
MC320a
Counter Name : AV_NB_IDLE_TCH_INTERF_BAND1 SFD reference : No reference. Data collection Status Inspection (polling=20s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of free TCH and free dynamic SDCCH/8 radio timeslots belonging to the interference band 1. This number is updated upon the receipt of 48.058 RF RESOURCE INDICATION. Trigger condition: At Accumulation Period expiry, all observations of this counter done at each polling period are averaged, i.e. summed and divided by the number of observations. The averaged value (real) is rounded up or down to the nearest integer value. External comment:
--
Edition: 13 Released
Page 468
MC320b
Counter Name : AV_NB_IDLE_TCH_INTERF_BAND2 SFD reference : No reference. Data collection Status Inspection (polling=20s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of free TCH and free dynamic SDCCH/8 radio timeslots belonging to the interference band 2. This number is updated upon the receipt of 48.058 RF RESOURCE INDICATION. Trigger condition: At Accumulation Period expiry, all observations of this counter done at each polling period are averaged, i.e. summed and divided by the number of observations. The average value (real) is rounded up or down to the nearest integer value. External comment:
--
MC320c
Counter Name : AV_NB_IDLE_TCH_INTERF_BAND3 SFD reference : No reference. Data collection Status Inspection (polling=20s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of free TCH and free dynamic SDCCH/8 radio timeslots belonging to the interference band 3. This number is updated upon the receipt of 48.058 RF RESOURCE INDICATION. Trigger condition: At Accumulation Period expiry, all observations of this counter done at each polling period are averaged, i.e. summed and divided by the number of observations. The averaged value (real) is rounded up or down to the nearest integer value. External comment:
--
Edition: 13 Released
Page 469
MC320d
Counter Name : AV_NB_IDLE_TCH_INTERF_BAND4 SFD reference : No reference. Data collection Status Inspection (polling=20s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of free TCH and free dynamic SDCCH/8 radio timeslots in FR or HR usage belonging to the interference band 4. This number is updated upon the receipt of 48.058 RF RESOURCE INDICATION. Trigger condition: At Accumulation Period expiry, all observations of this counter done at each polling period are averaged, i.e. summed and divided by the number of observations. The averaged value (real) is rounded up or down to the nearest integer value. External comment:
--
MC320e
Counter Name : AV_NB_IDLE_TCH_INTERF_BAND5 SFD reference : No reference. Data collection Status Inspection (polling=20s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of free TCH and free dynamic SDCCH/8 radio timeslots belonging to the interference band 5. This number is updated upon the receipt of 48.058 RF RESOURCE INDICATION. Trigger condition: At Accumulation Period expiry, all observations of this counter done at each polling period are averaged, i.e. summed and divided by the number of observations. The average value (real) is rounded up or down to the nearest integer value. External comment:
--
Edition: 13 Released
Page 470
MC34
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Cumulated time (in seconds) during which there is no free FR TCH sub-channel to serve an incoming FR TCH request. A TCH sub-channel is seen as busy: i) if the TCH sub-channel is occupied by a HR or FR CS call, or ii) if the TCH sub-channel is allocated to the MFS to carry PS traffic. Trigger condition: The counter is started when there is no free FR TCH sub-channel to serve an incoming FR TCH request. The counter is stopped when there is a free FR TCH sub-channel to serve an incoming FR TCH request. External comment:
--
Edition: 13 Released
Page 471
MC35
Counter Name : AV_NB_A_TRAF_CHAN_BLOCK_OUT_OF_SERV SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Status Inspection (polling=20s)
Release B8 B9 Measured object BSC BSC Package 0 1
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of A-traffic-channels (i.e. all A-channels except for N7, SPC and synchro) that are blocked or out of service. Trigger condition: Every 20 seconds, the TTCHs that satisfy one of the following conditions are counted : a) Maintenance state is either IN TRAFFIC or FAULTY IN TRAFFIC or WAIT TRAFFIC CLEAR and Telephonic state is blocked b) Maintenance state is either OPERATOR OUT OF SERVICE or FAULTY OUT OF SERVICE Note: This counter is not incremented if the channel is in the Maintenance state NOT EQUIPPED, or if the channel is in use for signalling (N7), for a semi-permanent connection (SPC), or for synchronisation
External comment:
--
Edition: 13 Released
Page 472
MC350
Counter Name : NB_N7_CON_REQ SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: MC350=C253+C254 Trigger condition: External comment:
--
MC351
Counter Name : NB_N7_CON_CONF SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: MC351=C255+C256 Trigger condition: External comment:
--
Edition: 13 Released
Page 473
MC36
Counter Name : AV_NB_AVAIL_A_TRAF_CHAN SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Status Inspection (polling=20s)
Release B8 B9 Measured object BSC BSC Package 0 1
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of available A-traffic-channels channels (i.e. all A-channels except for N7, SPC and Trigger condition: Every 20 seconds, the TTCHs that satisfay one of the following conditions are counted : Maintenance state is either IN TRAFFIC or FAULTY IN TRAFFIC or WAIT TRAFFIC CLEAR and Telephonic state is available free or available busy. Note: This counter is not incremented if the channel is in the Maintenance state NOT EQUIPPED, or if the channel is in use for signalling (N7), for a semi-permanent connection (SPC), or for synchronisation
External comment:
--
MC370a
Counter Name : NB_TRX_FR_ALLOC SFD reference : RFD 3BKA55CBR044734 Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: MC370A= SUM(all TRX_TS of the TRX) (C370A) Trigger condition: External comment:
--
Edition: 13 Released
Page 474
MC370b
Counter Name : NB_TRX_HR_ALLOC SFD reference : RFD 3BKA55CBR044734 Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: MC370B= SUM(all TRX_TS of the TRX) (C370B) Trigger condition: External comment:
--
MC380a
Counter Name : TIME_TRX_FR_BUSY SFD reference : RFD 3BKA55CBR044734 Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Time (in seconds) during which the TCH radio timeslot in FR usage is busy Trigger condition: MC380A= SUM (all TRX_TS of the TRX) (C380A) External comment:
--
Edition: 13 Released
Page 475
MC380b
Counter Name : TIME_TRX_HR_BUSY SFD reference : RFD 3BKA55CBR044734 Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Time (in seconds) during which the TCH radio timeslot in HR usage is busy Trigger condition: MC380B= SUM (all TRX_TS of the TRX) (C380B) External comment:
--
MC380c
Counter Name : TIME_TRX_GSM_FR_BUSY SFD reference : 3BK 10204 0541 DTZZA ("B8 BSC Counter and Indicator Improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Technology
GSM
External comment:
--
Domain: Traffic Load Counter definition: Time (in seconds) during which the TCH radio timeslot or dynamic SDCCH/8 timeslot in the GSM frequency band is busy in FR usage. Trigger condition: The counter cumulates over the Accumulation Period, per radio timeslot, all unit times during which the TCH FR channel in the GSM frequency band is busy. For each channel allocation: The counter starts being incremented after the sending of the 48.058 CHANNEL ACTIVATION message to the cell concerning a full rate TCH channel for the related TRX timeslot. The counter stops being incremented after the reception of a 48.058 RF CHANNEL RELEASE ACKNOWLEDGE message or the expiry of timer T_RCR_ACK twice (after the sending of the 48.058 RF CHANNEL RELEASE message) concerning the TCH channel previously activated on the related TRX timeslot.
Edition: 13 Released
Page 476
MC380d
Counter Name : TIME_TRX_GSM_HR_BUSY SFD reference : 3BK 10204 0541 DTZZA ("B8 BSC Counter and Indicator Improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Technology
GSM
External comment:
--
Domain: Traffic Load Counter definition: Time (in seconds) during which the TCH radio timeslot or dynamic SDCCH/8 timeslot in the GSM frequency band is busy in HR usage. Trigger condition: The counter cumulates over the Accumulation Period, per radio timeslot, all unit times during which the TCH HR channel in the GSM frequency band is busy. For each channel allocation: The counter starts being incremented after the sending of the 48.058 CHANNEL ACTIVATION message to the cell concerning a half rate TCH channel for the related TRX timeslot. The counter stops being incremented after the reception of a 48.058 RF CHANNEL RELEASE ACKNOWLEDGE message or the expiry of timer T_RCR_ACK twice (after the sending of the 48.058 RF CHANNEL RELEASE message) concerning the TCH channel previously activated on the related TRX timeslot.
Edition: 13 Released
Page 477
MC380e
Counter Name : TIME_TRX_DCS_FR_BUSY SFD reference : 3BK 10204 0541 DTZZA ("B8 BSC Counter and Indicator Improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Technology
GSM
External comment:
--
Domain: Traffic Load Counter definition: Time (in seconds) during which the TCH radio timeslot or dynamic SDCCH/8 timeslot in the DCS/PCS frequency band is busy in FR usage. Trigger condition: The counter cumulates over the Accumulation Period, per radio timeslot, all unit times during which the TCH FR channel in the DCS/PCS frequency band is busy. For each channel allocation: The counter starts being incremented after the sending of the 48.058 CHANNEL ACTIVATION message to the cell concerning a full rate TCH channel for the related TRX timeslot. The counter stops being incremented after the reception of a 48.058 RF CHANNEL RELEASE ACKNOWLEDGE message or the expiry of timer T_RCR_ACK twice (after the sending of the 48.058 RF CHANNEL RELEASE message) concerning the TCH channel previously activated on the related TRX timeslot.
Edition: 13 Released
Page 478
MC380f
Counter Name : TIME_TRX_DCS_HR_BUSY SFD reference : 3BK 10204 0541 DTZZA ("B8 BSC Counter and Indicator Improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Technology
GSM
External comment:
--
Domain: Traffic Load Counter definition: Time (in seconds) during which the TCH radio timeslot or dynamic SDCCH/8 timeslot in the DCS/PCS frequency band is busy in HR usage. Trigger condition: The counter cumulates over the Accumulation Period, per radio timeslot, all unit times during which the TCH HR channel in the DCS/PCS frequency band is busy. For each channel allocation: The counter starts being incremented after the sending of the 48.058 CHANNEL ACTIVATION message to the cell concerning a half rate TCH channel for the related TRX timeslot. The counter stops being incremented after the reception of a 48.058 RF CHANNEL RELEASE ACKNOWLEDGE message or the expiry of timer T_RCR_ACK twice (after the sending of the 48.058 RF CHANNEL RELEASE message) concerning the TCH channel previously activated on the related TRX timeslot.
MC381
Counter Name : TIME_TRX_TCH_BUSY_BY_MULTIBAND_MS SFD reference : 3BK 10204 0286 DSZZA ("Multiband Operation in one Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: MC381= SUM (over all TRX_TS of the TRX) (C381A+C381B) Trigger condition: External comment:
--
Edition: 13 Released
Page 479
MC390
Counter Name : NB_TIMES_SDCCH_BUSY (110) SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: MC390=SUM (all TRX_TS of the TRX) C39, C39 is NB_TIMES_SDCCH_BUSY in type 4. Trigger condition: External comment:
--
MC400
Counter Name : TIME_TRX_SDCCH_BUSY SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: MC400= SUM (all TRX_TS of the TRX) C40 Trigger condition: External comment:
--
Edition: 13 Released
Page 480
MC41b
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of incoming external TCH (in HR or FR usage) handover -preparation failures due to A-traffic-channel status mismatch between the BSC and the MSC. Trigger condition: 1) Whenever a 48.008 HANDOVER FAILURE message with a cause value of "requested terrestrial resource unavailable" is sent on A interface from the target BSC to the MSC. 2) Whenever a 48.008 HANDOVER FAILURE message with a cause value of "terrestrial circuit already allocated" is sent on A interface from the target BSC to the MSC. 3) Whenever a 48.008 HANDOVER FAILURE message with a cause value of "BSS not equipped" is sent on A interface from the target BSC to the MSC. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 481
MC448a
Counter Name : NB_TCH_HO_ATPT_26_BadQualHR SFD reference : 3BK 10204 0479 DTZZA ("Adaptive MultiRate Codec") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of intracell handover attempts, with the cause 26: "HR to FR channel adaptation due to bad radio quality" on a TCH channel. Trigger condition: Whenever 44.018 ASSIGNMENT COMMAND is sent to the MS via the BTS because of cause 26 on TCH. External comment:
--
MC448b
Counter Name : NB_TCH_HO_ATPT_27_GoodQualFR SFD reference : 3BK 10204 0479 DTZZA ("Adaptive MultiRate Codec") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of intracell handover attempts, with the cause 27: "FR to HR channel adaptation due to good radio quality" on a TCH channel. Trigger condition: Whenever 44.018 ASSIGNMENT COMMAND is sent to the MS via the BTS because of cause 27 on TCH. External comment:
--
Edition: 13 Released
Page 482
MC449
Counter Name : NB_TCH_HO_ATPT_28_FastTraffic SFD reference : 3BK 10204 0475 DTZZA ("Instantaneous Peaks Management") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of handover attempts, with the cause 28 (Fast Traffic Handover). Trigger condition: Whenever 44.018HANDOVER COMMAND is sent to the MS via the BTS because of cause 28 on TCH. This counter is incremented in the serving cell. External comment:
--
Edition: 13 Released
Page 483
MC460a
Counter Name : NB_TCH_EMERGENCY_HO_PRESERVATION SFD reference : 3BK 10204 0541 DTZZA ("B8 BSC Counter and Indicator Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of high priority TCH requests served when 1) the number of free TCH timeslots is less than or equal to NUM_TCH_EGNCY_HO and, 2) the queue for this cell is not empty. Trigger condition: The counter is incremented on the serving cell whenever the 48.058 CHANNEL ACTIVATION message allocating a TCH channel is sent and the following two conditions are both fulfilled: 1) the TCH is allocated to serve i) an internal handover Cause 2, 3, 4, 5, 6, 7, 10, 11, 12, 15, 16, 17, 18, 22, 27, or, ii) an external handover Cause "Uplink quality", "Uplink strength", "Downlink quality", "Downlink strength", "Distance", or iii) a normal assignment or an external handover with the preemption indicator set (i.e. Preemption Capability Indicator = 1 and EN_TCH_PREEMPT = Enable). 2) the number of free TCH timeslots is less than or equal to NUM_TCH_EGNCY_HO and there is at least one request queued for this cell. Note 1: This counter counts both inter-PLMN and intra-PLMN handover events. Note 2: The HMI name of the parameter NUM_TCH_EGNCY_HO is "NUM_TCH_EMERGENCY_HO". External comment:
--
Edition: 13 Released
Page 484
MC461
Counter Name : NB_TCH_HO_ATPT_29_TFO SFD reference : 3BK 10204 0478 DTZZA ("Tandem Free Operation") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of intra-cell handover - attempts, with the cause 29 (TFO mismatch resolution, TFO optimisation). Trigger condition: Whenever 44.018 ASSIGNMENT COMMAND is sent to the MS via the BTS because of cause 29 on TCH. External comment:
--
MC462a
Counter Name : NB_OUT_INTER_PLMN_TCH_HO_REQ SFD reference : 3BK 10204 0600 DTZZA ("Outgoing inter-PLMN Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of inter-PLMN TCH outgoing handover or directed retry requests. Trigger condition: Whenever a 48.008 HANDOVER REQUIRED message with the "cell identification discriminator" set to a value identifying a GSM handover is sent to the MSC on A interface for an external TCH handover or an external directed retry triggered towards a 2G cell belonging to a PLMN different from the PLMN of the External comment:
--
Edition: 13 Released
Page 485
MC462b
Counter Name : NB_OUT_INTER_PLMN_TCH_HO_ATPT SFD reference : 3BK 10204 0600 DTZZA ("Outgoing inter-PLMN Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of inter-PLMN TCH outgoing handover or directed retry attempts. Trigger condition: Whenever a 44.018 HANDOVER COMMAND message is sent to the MS on Abis interface for an external TCH handover or an external directed retry triggered towards a 2G cell belonging to a PLMN different from the PLMN of the serving cell. External comment:
--
MC462c
Counter Name : NB_OUT_INTER_PLMN_TCH_HO_SUCC SFD reference : 3BK 10204 0600 DTZZA ("Outgoing inter-PLMN Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of inter-PLMN TCH outgoing handover or directed retry successes. Trigger condition: Whenever a 48.008 CLEAR COMMAND message with Cause "Handover successful" is received from the MSC on the A interface for an external TCH handover or an external directed retry triggered towards a 2G cell belonging to a PLMN different from the PLMN of the serving cell. External comment:
--
Edition: 13 Released
Page 486
MC463a
Counter Name : NB_INC_INTER_PLMN_TCH_HO_REQ SFD reference : 3BK 10204 0600 DTZZA ("Outgoing inter-PLMN Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of inter-PLMN TCH incoming handover or directed retry requests Trigger condition: Whenever a 48.008 HANDOVER REQUEST message is received from the MSC on A interface for an external TCH handover or an external directed retry triggered towards the target cell from a serving cell belonging to a PLMN different from the PLMN of the target cell. External comment:
--
MC463b
Counter Name : NB_INC_INTER_PLMN_TCH_HO_ATPT SFD reference : 3BK 10204 0600 DTZZA ("Outgoing inter-PLMN Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of inter-PLMN TCH incoming handover or directed retry attempts Trigger condition: Whenever a 48.008 HANDOVER REQUEST ACK message is sent by the target BSC containing the 44.018 HANDOVER COMMAND message for an external TCH handover or an external directed retry triggered towards the target cell from a serving cell belonging to a PLMN different from the PLMN of the External comment:
--
Edition: 13 Released
Page 487
MC463c
Counter Name : NB_INC_INTER_PLMN_TCH_HO_SUCC SFD reference : 3BK 10204 0600 DTZZA ("Outgoing inter-PLMN Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of inter-PLMN TCH incoming handover or directed retry successes Trigger condition: Whenever a 44.018 HANDOVER COMPLETE message is received from the MS on Abis interface for an external TCH handover or an external directed retry triggered towards the target cell from a serving cell belonging to a PLMN different from the PLMN of the target cell. External comment:
--
MC480
Counter Name : NB_TCH_HO_REQ_30_ReturnCSZone SFD reference : 3BK 10204 0609 DTZZA ("Autonomous Packet Resource Allocation (RAE-4)") Data collection Cumulative
Release Measured object Package 1 B9 Common cell
Technology
GSM
Domain: Handover Counter definition: Number of TCH intracell HO cause 30 requests Trigger condition: Whenever the BSC detects that a TCH needs to be moved from PS zone to CS zone, I.e. whenever at MAX_SPDCH_LIMIT calculation time, the BSC detects that 1 TCH is allocated in both MAX_SPDCH_LIMIT zone and the non pre-emptable PS zone and EN_RETURN_CS_ZONE_HO = Enabled. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Sub domain-3:
Edition: 13 Released
Page 488
MC481
Counter Name : NB_TCH_HO_ATPT_30_ReturnCSZone SFD reference : 3BK 10204 0609 DTZZA ("Autonomous Packet Resource Allocation (RAE-4)") Data collection Cumulative
Release Measured object Package 1 B9 Common cell
Technology
GSM
Domain: Handover Counter definition: Number of TCH intracell HO cause 30 attempts. Trigger condition: Whenever a 44.018 Assignment Command is sent to the MS for a TCH HO cause 30. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Sub domain-3:
MC541
Counter Name : NB_INC_EXT_TCH_HO_PREP_FAIL_R_ABIS SFD reference : 3BK 10204 0518 DTZZA ("A bis and A ter dynamic allocation") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of incoming external TCH (in HR or FR usage) handover -preparation failures due to congestion (C541a), or A-traffic-channel status mismatch between the BSC and the MSC (C41b). Trigger condition: Note: This counter counts both inter-PLMN and intra-PLMN handover events. External comment:
--
Edition: 13 Released
Page 489
MC541a
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of incoming external TCH (in HR or FR usage) handover -preparation failures due to congestion. Trigger condition: Whenever a 48.008 HANDOVER FAILURE message with a cause value of "no radio resource available" is sent on A interface from the target BSC to the MSC during an external TCH handover. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
MC551
Counter Name : NB_INC_INT_TCH_HO_PREP_FAIL_CONG_R_ABIS SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of incoming internal inter-cell TCH (in HR or FR usage) handover -preparation failures due to congestion. Trigger condition: Whenever an internal inter-cell TCH handover cannot be performed, because the target cell is congested (no free TCH channel). External comment:
--
Edition: 13 Released
Page 490
MC555
Counter Name : NB_INC_IDR_PREP_FAIL_CONG_R_ABIS SFD reference : 3BK 10204 0518 DTZZA ("A bis and A ter dynamic allocation") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of incoming internal directed retry (forced or normal) -preparation failures due to congestion (on Air or A-bis interface). The target TCH channel can be in HR or FR usage. Trigger condition: 1) Whenever there are no free TCH in the target cell during a forced or normal internal directed retry. 2) Whenever no TCH resource is available on A-bis interface for a forced or normal internal directed retry. (not valid in B7) External comment:
--
Sub domain-1: Directed Retry Sub domain-2: Internal Sub domain-3: Incoming
MC561
Counter Name : NB_INTRA_TCH_HO_PREP_FAIL_CONG_R_ABIS SFD reference : 3BK 10204 0518 DTZZA ("A bis and A ter dynamic allocation") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of intra-cell TCH (in HR or FR usage) handover -preparation failures due to congestion. Trigger condition: Whenever a internal intra-cell TCH handover cannot be performed, because there is no free TCH channel to serve the handover. External comment:
--
Edition: 13 Released
Page 491
MC586a
Counter Name : NB_TCH_HO_ATPT_10_TooLowLevUpInZone SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of intra-cell handover attempts, with cause 10 "Inner zone uplink level too low" on TCH channel (in HR or FR usage). This counter is related to concentric cell environment. Trigger condition: Whenever 44.018ASSIGNMENT COMMAND is sent to the MS via the BTS because of cause 10. External comment:
--
MC586b
Counter Name : NB_TCH_HO_ATPT_11_TooLowLevDownInZone SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of intra-cell handover attempts, with cause 11: "Inner zone downlink level too low" on TCH channel (in HR or FR usage). This counter is related to concentric cell environment. Trigger condition: Whenever 44.018ASSIGNMENT COMMAND is sent to the MS via the BTS because of cause 11. External comment:
--
Edition: 13 Released
Page 492
MC586c
Counter Name : NB_TCH_HO_ATPT_13_TooHighLevUpDownOutZo SFD reference : 3BK 10204 0327 DSZZA ("General HO Algorithms Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of intra-cell handover attempts, with cause 13: "Outer zone uplink and downlink levels too high" on TCH channel (in HR or FR usage). This counter is related to concentric cell environment. Trigger condition: Whenever 44.018ASSIGNMENT COMMAND is sent to the MS via the BTS because of cause 13. External comment:
--
MC607
Counter Name : NB_SDCCH_HO_20_HighLevNeigCellForcDR SFD reference : 3BK 10204 0165 DSZZA ("External Directed Retry") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: MC607=C607, Number of SDCCH inter-cell internal or external handover attempts with cause 20: "forced directed retry". This counter is related to a forced directed retry (internal or external). Trigger condition: Whenever 44.018 HANDOVER COMMAND is sent to the MS via the BTS because of cause 20. Note: This counter counts both inter-PLMN and intra-PLMN handover events. External comment:
--
Edition: 13 Released
Page 493
MC612a
Counter Name : NB_TCH_NOR_ASS_PREP_FAIL_NO_QUEUE SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: Number of TCH (in HR or FR usage) normal assignment preparation failures because of the non-queuing of the ASSIGNMENT REQUEST message. Case: 48.008ASSIGNMENT REQUEST on TCH (in HR or FR usage) is received when no TCH is available in the cell. The request is rejected (by 48.008ASSIGNMENT FAILURE, cause: "no radio resource available"), because the queuing procedure is either: 1) disabled within the BSC (i.e. (T11=0 and QUEUE_ANYWAY=0), OR (T11_forced=0 and QUEUE_ANYWAY=1)), or 2) enabled within the BSC, i.e. T11 <> 0, but not requested by the MSC when QUEUE_ANYWAY=0.
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3: Failure
Trigger condition: The counter is incremented upon the sending of 48.008ASSIGNMENT FAILURE (cause: "no radio resource available") for a TCH channel because no TCH is available and either the queing is disabled in the BSC (T11=0 and QUEUE_ANYWAY=0, or T11_forced=0 and QUEUE_ANYWAY=1), or the queing is enabled, QUEUE_ANYWAY=0, and the MSC does not request a queuing. External comment:
--
Edition: 13 Released
Page 494
MC612b
Counter Name : NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_FULL SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: MC612b=C612b, Case: 48.008ASSIGNMENT REQUEST on TCH (in FR or HR usage) is received when no TCH is available in the cell. The queuing is enabled within the BSC, but the request is rejected (by 48.008ASSIGNMENT FAILURE, cause: "no radio resource available"), because the queue is full and no request of lower priority can be dequeued from the BSC queue. Trigger condition: The counter is incremented upon the sending of 48.008ASSIGNMENT FAILURE (cause: "no radio resource available") for a TCH channel because the queue is full and no request of lower priority can be dequeued. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3: Failure
Edition: 13 Released
Page 495
MC612c
Counter Name : NB_TCH_NOR_ASS_PREP_FAIL_T11_EXP SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: Case: 48.008ASSIGNMENT REQUEST is queued because no TCH (in HR or FR usage) is available in the cell, timer T11 (case MSC requests for queuing whatever QUEUE_ANYWAY value may be) or timer T11_forced (case QUEUE_ANYWAY=1, i.e. the queuing is forced within the BSC) is started, and no free TCH can be found before timer expiry, consequently the request is rejected (by 48.008 CLEAR REQUEST cause: "no radio resource available"). Remark: If an internal directed retry is attempted and failed while T11/T11_forced is running, the request is un-holded and the BSC waits for the expiry of the relevant timer. Consequently, this counter must not be incremented upon the failure of an internal directed retry. Trigger condition: The counter is incremented upon the sending of 48.008 CLEAR REQUEST (cause : "no radio resource available") -following the expiry of T11 or T11 forced for a queued TCH normal assignment. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3: Failure
Edition: 13 Released
Page 496
MC612d
Counter Name : NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_REJ SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: Case: 48.008ASSIGNMENT REQUEST is queued because no TCH (in HR or FR usage) is available in the cell, timer T11 (case MSC requests for queuing whatever QUEUE_ANYWAY value may be) or timer T11_forced (case QUEUE_ANYWAY=1, i.e. the queuing is forced within the BSC) is started, and before the timer expiry, the request is dequeued due to the receipt of a higher priority request (i.e. 48.008ASSIGNMENT REQUEST) : the BSC sends 48.008ASSIGNMENT FAILURE (cause: "no radio resource available") for the first transaction. Remark: As soon as an internal directed retry is attempted, the request is blocked within the BSC and cannot be dequeued by a higher priority request. Trigger condition: The counter is incremented upon the sending of the 48.008ASSIGMENT FAILURE (cause: "no radio resource available") for a dequeued TCH request (i.e. normal assignment) due to the receipt of a higher priority request. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3: Failure
Edition: 13 Released
Page 497
MC621
Counter Name : NB_TCH_DROP_OUT_HO_EXEC_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: Number of TCH drops during the execution of any TCH outgoing handover, per TRX. MC621 = C621 Trigger condition: 1) Inter-cell TCH handover: whenever the timer supervising the handover procedure (T3103) expires. 2) External TCH handover: whenever the timer supervising the handover procedure on the serving cell (T8) expires. 3) Intra-cell TCH handover: whenever the timer supervising the handover procedure (T3107) expires.
MC642
Counter Name : NB_INC_EXT_HO_SUCC SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Edition: 13 Released
Page 498
MC643
Counter Name : NB_INC_EXT_HO_EXEC_FAIL_MS_ACCESS SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
MC645a
Counter Name : NB_OUT_EXT_REAL_HO_REQ SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: MC645a = C45a + C85a Trigger condition: Whenever a 48.008 HANDOVER REQUIRED message with the "cell identification discriminator" set to a value identifying a GSM handover is sent on A interface from the serving cell to the MSC for a TCH handover (C45a) or an SDCCH handover (C85a) towards a 2G cell. If more than one 48.008 HANDOVER REQUIRED is sent in the frame of the same Handover procedure, the respective counter is incremented only once. 48.008 HANDOVER REQUIRED is sent in following situations : 1) An external handover alarm has been raised, with corresponding list of candidate cells.
External comment:
--
Edition: 13 Released
Page 499
MC646
Counter Name : NB_OUT_EXT_HO_SUCC SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
MC647
Counter Name : NB_OUT_EXT_HO_EXEC_FAIL_REV SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Edition: 13 Released
Page 500
MC648
Counter Name : NB_OUT_EXT_HO_EXEC_FAIL_NO_REV SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
MC650
Counter Name : NB_OUT_EXT_HO_ATPT SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Edition: 13 Released
Page 501
MC652
Counter Name : NB_INC_INT_HO_SUCC SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
MC653
Counter Name : NB_INC_INT_HO_EXEC_FAIL_MS_ACCESS SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Edition: 13 Released
Page 502
MC655a
Counter Name : NB_OUT_INT_HO_REQ SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
MC656
Counter Name : NB_OUT_INT_HO_SUCC SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Edition: 13 Released
Page 503
MC657
Counter Name : NB_OUT_INT_HO_EXEC_FAIL_REV SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
MC658
Counter Name : NB_OUT_INT_HO_EXEC_FAIL_NO_REV SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Edition: 13 Released
Page 504
MC660
Counter Name : NB_OUT_INT_HO_ATPT SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
MC662
Counter Name : NB_INTRA_HO_SUCC SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Edition: 13 Released
Page 505
MC663
Counter Name : NB_INTRA_HO_EXEC_FAIL_NO_REV SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
MC667
Counter Name : NB_INTRA_HO_EXEC_FAIL_REV SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Edition: 13 Released
Page 506
MC670
Counter Name : NB_HO_2_TooLowQualUp SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
MC671
Counter Name : NB_HO_3_TooLowLevUp SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Edition: 13 Released
Page 507
MC672
Counter Name : NB_HO_4_TooLowQualDown SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
MC673
Counter Name : NB_HO_5_TooLowLevDown SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Edition: 13 Released
Page 508
MC674
Counter Name : NB_HO_6_TooLongDistance SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
MC675
Counter Name : NB_HO_MSC_TRIG SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Edition: 13 Released
Page 509
MC676
Counter Name : NB_HO_15_TooHighLevInterfUp SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
MC677
Counter Name : NB_HO_16_TooHighLevInterfDown SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Edition: 13 Released
Page 510
MC678
Counter Name : NB_HO_12_TooLowPowBudg SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
MC679
Counter Name : NB_HO_21_HighLevNeigCellPrefBand SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Edition: 13 Released
Page 511
MC701a
Counter Name : NB_TCH_FR_REQ SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Number of TCH normal assignments requests from mobiles with following speech capability (after possible filtering of the MSC) : - FR only mobiles ; - FR and EFR only ; - HR only ; - EFR&HR only ; - EFR only. Trigger condition: Receipt of 48.008 ASSIGNMENT REQUEST from the MSC for speech call with : - only GSM speech coding algorithm version 1 full rate allowed ; - only GSM speech coding algorithm version 1 full rate and version 3 full rate allowed ; - only GSM speech coding algorithm version 1 half rate allowed ; - only GSM speech coding algorithm version 1 half rate and version 3 full rate allowed ; - only GSM speech coding algorithm version 3 full rate allowed.
Sub domain-1: Resource Allocation & Management Sub domain-2: Service Sub domain-3:
External comment:
From 3GPP point of view, HR only, EFR&HR only, EFR only are not allowed, as support of FR is mandatory. They are however listed for completion.
Edition: 13 Released
Page 512
MC701b
Counter Name : NB_TCH_DR_REQ SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Number of TCH normal assignments requests from dual rate mobiles. Trigger condition: Receipt of 48.008 ASSIGNMENT REQUEST from the MSC for speech call with only GSM speech coding algorithm version 1 full rate and GSM speech coding algorithm version 1 half rate allowed. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Service Sub domain-3:
MC701c
Counter Name : NB_TCH_DR_EFR_REQ SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Number of TCH normal assignment requests from mobiles supporting FR, HR and EFR. Trigger condition: Receipt of 48.008 ASSIGNMENT REQUEST from the MSC for speech call with GSM speech coding algorithm version 1 full rate, GSM speech coding algorithm version 1 half rate and GSM speech coding algorithm version 2 full rate allowed. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Service Sub domain-3:
Edition: 13 Released
Page 513
MC701d
Counter Name : NB_TCH_AMR_REQ SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Number of TCH normal assignment requests from AMR mobiles. Trigger condition: Receipt of 48.008 ASSIGNMENT REQUEST from the MSC for speech call with GSM speech coding algorithm version 3 full rate or half rate allowed. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Service Sub domain-3:
MC701e
Counter Name : NB_TCH_DATA_REQ SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Number of TCH normal assignment requests for data calls. Trigger condition: Receipt of 48.008 ASSIGNMENT REQUEST from the MSC for data call. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Service Sub domain-3:
Edition: 13 Released
Page 514
MC702a
Counter Name : NB_TCH_NOR_FR_ALLOC SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: number of TCH normal assignment/mode modify in FR usage - whose channel is allocated in the BSC. Trigger condition: 48.058 CHANNEL ACTIVATION/ MODE MODIFY about to be sent to the BTS, indicating a FR channel with GSM speech coding algorithm version 1, not related to handover. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Service Sub domain-3:
MC702b
Counter Name : NB_TCH_NOR_HR_ALLOC SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: number of TCH normal assignment/mode modify in HR usage - whose channel is allocated in the BSC. Trigger condition: 48.058 CHANNEL ACTIVATION / MODE MODIFY about to be sent to the BTS, indicating a HR channel with GSM speech coding algorithm version 1, not related to handover. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Service Sub domain-3:
Edition: 13 Released
Page 515
MC702c
Counter Name : NB_TCH_NOR_EFR_ALLOC SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: number of TCH normal assignment/mode modify in EFR usage - whose channel is allocated in the BSC. Trigger condition: 48.058 CHANNEL ACTIVATION/ MODE MODIFY about to be sent to the BTS, indicating a FR channel with GSM speech coding algorithm version 2, not related to handover. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Service Sub domain-3:
MC703
Counter Name : NB_TCH_NOR_ASS_ALLOC_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of TCH (in HR or FR usage) normal assignment -whose RTCH channel is allocated in the BSC, per TRX. MC703 = C703 Trigger condition: Whenever a 48.058 CHANNEL ACTIVATION message is about to be sent on Abis Interface to activate a TCH channel for normal assignment. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3:
Edition: 13 Released
Page 516
MC704a
Counter Name : NB_TCH_NOR_AMR_FR_ALLOC SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: number of TCH normal assignment/mode modify in FR AMR usage - whose channel is allocated in the Trigger condition: 48.058 CHANNEL ACTIVATION/ MODE MODIFY about to be sent to the BTS, indicating a FR channel with GSM speech coding algorithm version 3, not related to handover. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Service Sub domain-3:
MC704b
Counter Name : NB_TCH_NOR_AMR_HR_ALLOC SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: number of TCH normal assignment/mode modify in HR AMR usage - whose channel is allocated in the Trigger condition: 48.058 CHANNEL ACTIVATION/ MODE MODIFY about to be sent to the BTS, indicating a HR channel with GSM speech coding algorithm version 3, not related to handover. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Service Sub domain-3:
Edition: 13 Released
Page 517
MC705
Counter Name : NB_TCH_NOR_DATA_ALLOC SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: number of TCH normal assignment/mode modify for data - whose channel is allocated in the BSC. Trigger condition: 48.058 CHANNEL ACTIVATION/ MODE MODIFY about to be sent to the BTS, indicating a data call, not related to handover. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Service Sub domain-3:
Edition: 13 Released
Page 518
MC706
Counter Name : NB_EGSM_MS_ACCESS_EXCEPT_LU SFD reference : 3BK 10204 0519 DTZZA ("E-GSM support") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Number of initial accesses for call establishments (except location update) of MS supporting the E-GSM band, on a CELL basis. MC706 = C706 Trigger condition: Whenever a 44.018 CLASSMARK CHANGE message in the context of any establishment causes different from location update is received on Abis interface with a "Mobile Station Classmark 3" or a "Mobile Station Classmark 2" Information Element field specifying that the MS supports the E-GSM band. The counter is incremented only once per SCCP connection in the serving cell, i.e. on receipt of the first 44.018 CLASSMARK CHANGE message.
Sub domain-1: Resource Allocation & Management Sub domain-2: E-GSM Sub domain-3:
External comment:
--
Edition: 13 Released
Page 519
MC710
Counter Name : NB_TCH_OUT_HO_REQ_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Nb of TCH outgoing handover requests, per TRX. Intracell, internal intercell and external handovers are counted together. MC710 = C710 Trigger condition: 1) Intracell HO : Whenever the BSC process responsible for the handover procedure starts an intra cell TCH handover procedure. 2) Internal intercell HO : Whenever the BSC process responsible for the handover procedure selects a target cell (among a list of target cells) for internal inter cell TCH handover. 3) External HO : Whenever a 48.008 HANDOVER REQUIRED message with the "cell identification discriminator" set to a value identifying a GSM handover is sent on A interface to the MSC for a TCH handover towards a 2G cell. If more than one 48.008 HANDOVER REQUIRED is sent in the frame of the same Handover procedure, the counter is incremented only once. 48.008 HANDOVER REQUIRED is sent in following situations : 1) An external handover alarm has been raised, with corresponding list of candidate cells. 2) The list of candidate cells for the current alarm has been updated. Note: This counter counts both inter-PLMN and intra-PLMN handover events. External comment:
--
Edition: 13 Released
Page 520
MC711
Counter Name : NB_TCH_OUT_HO_PREP_FAIL_CONG_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Nb of outgoing TCH handover -preparation failures due to congestion, per TRX. Intracell, internal intercell and external handovers are counted together. MC711 = C711 Trigger condition: 1) Intracell HO : Whenever an intra-cell TCH handover cannot be performed, because there is no free TCH channel to allocate the handover to. 2) Internal inter-cell HO : Whenever a internal inter-cell TCH handover cannot be performed, because there is no free TCH channel to allocate the handover to. 3) External HO : Whenever a 48.008 HANDOVER REQUIRED REJECT with cause "no radio resource available" is received from the MSC by the serving BSC for an outgoing external TCH HO related to a 2G target cell. Note : the counter will be incremented for external TCH HO if and only if the parameter RESP_REQ is set to 1. External comment:
--
Edition: 13 Released
Page 521
MC712
Counter Name : NB_TCH_OUT_HO_SUCC_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Nb of outgoing TCH handover successes, per TRX. Intracell, internal intercell and external handovers are counted together. MC712 = C712 Trigger condition: 1) External HO: whenever 48.008CLEAR COMMAND (cause="handover successful") is received on the serving BSC on the TCH channel 2) Internal inter-cell HO: whenever 44.018HANDOVER COMPLETE is received from the MS via the target cell on the TCH channel 3) Internal intra-cell HO: whenever 44.018ASSIGNMENT COMPLETE is received from the MS via the cell on the TCH channel Note: This counter counts both inter-PLMN and intra-PLMN handover events. Note: This counter doesnt count hantover to UMTS
External comment:
--
Edition: 13 Released
Page 522
MC713
Counter Name : NB_TCH_OUT_HO_FAIL_REV_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Nb of outgoing TCH handover -execution failures due to MS access problem with reversion of the mobile to the old channel. Intracell, internal intercell and external handovers are counted together. MC713 = C713 Trigger condition: 1) External HO : Whenever a 44.018 HANDOVER FAILURE message is received on Abis interface from the serving cell , during an external TCH handover. 2) Internal inter-cell HO : Whenever a 44.018 HANDOVER FAILURE message is received on Abis interface from the serving cell, during an internal inter-cell TCH handover. 3) Intracell HO : Whenever a 44.018 ASSIGNMENT FAILURE message is received on Abis interface on the serving channel, during an internal intra-cell TCH handover. Note: This counter counts both inter-PLMN and intra-PLMN handover events. Note: This counter doesnt count hantover to UMTS,
External comment:
--
Edition: 13 Released
Page 523
MC714
Counter Name : NB_TCH_OUT_HO_FAIL_NO_REV_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Nb of outgoing TCH handover -execution failures due to MS access problem without reversion of the mobile to the old channel (call drop). Intracell, internal intercell and external handovers are counted together. MC714 = C714 Trigger condition: 1) External TCH HO : Whenever the timer supervising the handover procedure on the serving cell (T8), expires during an external TCH handover. 2) Internal intercell TCH HO : Whenever the timer supervising the handover procedure (T3103) expires during an internal inter-cell TCH handover. 3) Intracell TCH HO : Whenever the timer supervising the handover procedure (T3107) expires during an internal intra-cell Note: This counter counts both inter-PLMN and intra-PLMN handover events. Note: This counter doesnt count hantover to UMTS,
External comment:
--
Edition: 13 Released
Page 524
MC717a
Counter Name : NB_INC_IDR_SUCC_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of incoming directed retry (towards a TCH channel in HR or FR usage) successes, per TRX. MC717a = C717a Trigger condition: Whenever a 44.018 HANDOVER COMPLETE message is received on Abis interface from the target cell for a TCH channel involved in an internal directed retry procedure. External comment:
--
Sub domain-1: Directed Retry Sub domain-2: Internal Sub domain-3: Success
Edition: 13 Released
Page 525
MC717b
Counter Name : NB_INC_TCH_HO_SUCC_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of incoming internal and external TCH (in HR or FR usage) handover successes per TRX; since there are no reliable means at the target BSC to distinguish external directed retry from external handover, the external directed retries are counted by this counter. MC717b = C717b Trigger condition: 1) Internal inter-cell or external TCH handover: whenever a 44.018 HANDOVER COMPLETE message is received on Abis interface from the target cell for a TCH channel. 2) Intra-cell handover: whenever an 44.018 ASSIGNMENT COMPLETE message is received on Abis interface on the target channel. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 526
MC718
Counter Name : NB_TCH_NOR_ASS_SUCC_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of TCH (in HR or FR usage) normal assignment successes, per TRX. MC718 = C718 Trigger condition: Whenever a 44.018 ASSIGNMENT COMPLETE message is received on Abis interface for a TCH channel that is not involved in a handover procedure. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3: Success
MC736
Counter Name : NB_TCH_DROP_EST_PHAS_RLF_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of TCH (in HR or FR usage) drops in TCH established phase due to radio link failure (radio link timeout or Lapdm timer expiry), per TRX. MC736 = C736 Trigger condition: 1) Whenever a 48.058 CONNECTION FAILURE INDICATION message with a cause value of "radio link failure" is received on Abis interface for a TCH channel (after successful seizure). 2) Whenever an 48.058 ERROR INDICATION message is received on Abis interface and leads to a loss of External comment:
--
Sub domain-1: Established Phase Sub domain-2: TCH Sub domain-3: Failure
Edition: 13 Released
Page 527
MC739
Counter Name : NB_TCH_DROP_EST_PHAS_REM_TRANS_FAIL_TR SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of TCH (in HR or FR usage) drops in TCH established phase due to remote transcoder failures (per TRX). Trigger condition: The counter is incremented whenever a 48.058 CONNECTION FAILURE INDICATION message with cause "Remote Transcoder Failure" is received on Abis interface for an established TCH connection. The BSC considers a TCH connection as "established" once a 44.018 ASSIGNMENT COMPLETE message (in case of normal assignments or an internal intra-cell handovers) or a 44.018 HANDOVER COMPLETE message (in case of an internal inter-cell incoming HO or an external inter-cell incoming HO) has been received for the TCH connection. Note 1: MC739 = C739. Note 2: The counter is incremented only once per established TCH connection. Thus, even if the BTS sends several 48.058 CONNECTION FAILURE INDICATION messages with cause "Remote Transcoder Failure" for a particular established TCH connection, BSC will increment the counter only once for that connection. External comment:
--
Sub domain-1: Established Phase Sub domain-2: TCH Sub domain-3: Failure
Edition: 13 Released
Page 528
MC746b
Counter Name : NB_TCH_NOR_ASS_EXEC_FAIL_RADIO_TRX SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object TRX TRX Package 0 1
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: Number of TCH (in HR or FR usage) normal assignment -execution failures due to MS access problem, per TRX. MC746b = C746b Trigger condition: 1) The timer T3107 in the BSS supervising the TCH channel seizure by the mobile expires. 2) The BSC receives a 44.018 ASSIGNMENT FAILURE on the old (SDCCH) channel during the normal assignment procedure except in case of multiband cell, when the normal assignment procedure is performed in the inner zone and the ASSIGNMENT FAILURE is received with the cause "protocol error
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3: Failure
MC785a
Counter Name : NB_HO_7_ConsBadSACCHmicroCell SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Edition: 13 Released
Page 529
MC785d
Counter Name : NB_HO_17_TooLowLevUpMicroCell SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
MC785e
Counter Name : NB_HO_18_TooLowLevDownMicroCell SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Edition: 13 Released
Page 530
MC785f
Counter Name : NB_HO_14_HighLevNeigLowCellSlowMS SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
MC800
Counter Name : AV_NB_AVAIL_DYN_TS SFD reference : 3BK 10204 0511 DTZZA ("Dynamic SDCCH allocation") Data collection Status Inspection (polling=10s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of available dynamic SDCCH/8 timeslots. Trigger condition: At Accumulation Period expiry, all observations of this counter done at each polling period are averaged, i.e. summed and divided by the number of observations. The averaged value is rounded up or down to the nearest integer value. External comment:
--
Edition: 13 Released
Page 531
MC801a
Counter Name : AV_NB_BUSY_DYN_TCH SFD reference : 3BK 10204 0511 DTZZA ("Dynamic SDCCH allocation") Data collection Status Inspection (polling=10s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of busy dynamic SDCCH/8 timeslots allocated as TCH (in FR or HR usage). Trigger condition: The BSC takes periodically a sample of the number of busy dynamic SDCCH/8 timeslots allocated as TCH. The sampling period is set to the value indicated in the Status Inspection field. At the expiry of the accumulation period, all samples are averaged (i.e. summed and divided by the number of samples). The averaged value is rounded up or down to the nearest value with an accuracy of 0.1. A dynamic SDCCH/8 timeslot is considered as busy and allocated as TCH during the time it is allocated to a given MS for TCH traffic (in FR or HR usage). Note that the counter value that is indicated in the ASCII file (which can be obtained via the OBSYNT interface) is an integer value (i.e. it is as if the BSC multiplies by 10 the average). The reported value shall then be divided by 10 afterwards so that the value that is displayed to the end-user is the correct one
External comment:
--
Edition: 13 Released
Page 532
MC801b
Counter Name : MAX_NB_BUSY_DYN_TCH SFD reference : 3BK 10204 0511 DTZZA ("Dynamic SDCCH allocation") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Maximum number of busy dynamic SDCCH/8 timeslots allocated as TCH (in FR or HR usage). Trigger condition: Whenever a dynamic SDCCH/8 timeslot allocated as TCH becomes busy, the BSC determines the current number of busy dynamic SDCCH/8 timeslots allocated as TCH (in HR or FR usage). Counter MC801b is the maximum value of this number during the accumulation period. External comment:
--
Edition: 13 Released
Page 533
MC802a
Counter Name : AV_NB_BUSY_DYN_SDCCH SFD reference : 3BK 10204 0511 DTZZA ("Dynamic SDCCH allocation") Data collection Status Inspection (polling=10s)
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Average number of busy SDCCH sub-channels allocated on the dynamic SDCCH/8 timeslots. Trigger condition: The BSC takes periodically a sample of the number of busy dynamic SDCCH sub-channels. The sampling period is set to the value indicated in the Status Inspection field. At the expiry of the accumulation period, all samples are averaged (i.e. summed and divided by the number of samples). The averaged value is rounded up or down to the nearest value with an accuracy of 0.1. A dynamic SDCCH sub-channel is considered as busy during the time it is allocated to a given MS for SDCCH traffic. Note that the counter value that is indicated in the ASCII file (which can be obtained via the OBSYNT interface) is an integer value (i.e. it is as if the BSC multiplies by 10 the average). The reported value shall then be divided by 10 afterwards so that the value that is displayed to the end-user is the correct one
External comment:
--
Edition: 13 Released
Page 534
MC802b
Counter Name : MAX_NB_BUSY_DYN_SDCCH SFD reference : 3BK 10204 0511 DTZZA ("Dynamic SDCCH allocation") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Maximum number of busy dynamic SDCCH sub-channels allocated on the dynamic SDCCH/8 timeslots. Trigger condition: Whenever a dynamic SDCCH sub-channel becomes busy, the BSC determines the current number of busy dynamic SDCCH sub-channels. Counter MC802b is the maximum value of this number during the accumulation period. External comment:
--
Edition: 13 Released
Page 535
MC803
Counter Name : TIME_SDCCH_CONGESTION SFD reference : 3BK 10204 0511 DTZZA ("Dynamic SDCCH allocation") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Cumulated time (in seconds) during which the SDCCH request(s) are not served because no SDCCH sub-channel is available. Trigger condition: The time counter is started whenever a SDCCH request cannot be served. The time counter is stopped whenever one of the following conditions is checked: - if a SDCCH sub-channel becomes free and usable on a static SDCCH timeslot or on a dynamic timeslot allocated as SDCCH (i.e. when the timeslot is known from the SDCCH_RM module). The term "usable" means here that the SDCCH sub-channel is not mapped on a TCU in a very high overload state, or, - if a SDCCH request is served successfully. This condition corresponds to the case the SDCCH_RM module requests the TCH_RM module for a dynamic SDCCH timeslot.
External comment:
--
Edition: 13 Released
Page 536
MC804a
Counter Name : NB_UL_SINGLE_BLOCK_SIG_RACH SFD reference : 3BK 10204 0555 DTZZA ("Enhanced Cell Reselections for R97 onwards MS") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Traffic Load Counter definition: Number of Channel Request messages with access cause "Single block packet access" received by the Trigger condition: Whenever a 48.058 CHANNEL REQUIRED message with access cause "Single block packet access" is received on Abis interface. External comment:
--
MC804b
Counter Name : NB_UL_ONE_PHASE_SIG_RACH SFD reference : 3BK 10204 0555 DTZZA ("Enhanced Cell Reselections for R97 onwards MS") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Traffic Load Counter definition: Number of Channel Request messages with access cause "One phase packet access with request for single timeslot uplink transmission" received by the BSS. Trigger condition: This counter is incremented whenever a 48.058 CHANNEL REQUIRED message with access cause "One phase packet access with request for single timeslot uplink transmission" is received on Abis interface. External comment:
--
Edition: 13 Released
Page 537
MC805a
Counter Name : NB_CHANNEL_ASSIGN_DL_AGCH SFD reference : 3BK 10204 0555 DTZZA ("Enhanced Cell Reselections for R97 onwards MS") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Traffic Load Counter definition: Number of Immediate Assignment messages sent on AGCH for GPRS traffic. Trigger condition: Whenever a BSCGP Channel Assignment Downlink message is received for MS in non-DRX mode. External comment:
--
MC805b
Counter Name : NB_CHANNEL_ASSIGN_DL_PCH SFD reference : 3BK 10204 0555 DTZZA ("Enhanced Cell Reselections for R97 onwards MS") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Traffic Load Counter definition: Number of Immediate Assignment messages sent on PCH for GPRS traffic. Trigger condition: Whenever a BSCGP Channel Assignment Downlink message is received for MS in DRX mode. External comment:
--
Edition: 13 Released
Page 538
MC81
Measured unit:
Technology
GSM
Domain: Handover Counter definition: MC81=C81, Number of incoming external SDCCH handover -preparation failures due to congestion. Trigger condition: Whenever a 48.008 HANDOVER FAILURE message with a cause value of "no radio resource available" is sent on A interface from the target BSC to the MSC during an external SDCCH handover. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
MC812
Counter Name : NB_TCH_NOR_ASS_PREP_FAIL_CONG_R_ABIS SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: MC812 = C812 = C612a + C612b + C612c + C612d Trigger condition: External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3: Failure
Edition: 13 Released
Page 539
MC820
Counter Name : NB_INC_EXT_HO_REQ SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
MC821
Counter Name : NB_INC_EXT_HO_ATPT SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Edition: 13 Released
Page 540
MC830
Counter Name : NB_INC_INT_HO_REQ SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
MC831
Counter Name : NB_INC_INT_HO_ATPT SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Edition: 13 Released
Page 541
MC850
Counter Name : NB_MULTIBAND_MS_ACCESS_EXCEPT_LU_CELL SFD reference : 3BK 10204 0470 DTZZA ("B7 counters improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: Number of initial accesses for call establishments (location update apart) initiated by multiband mobile stations. The counter is defined on a per cell basis. A MS is considered as multiband if it supports: - the P-GSM (or E-GSM or R-GSM) and the DCS1800 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM900 and DCS1800 bands", or, - the GSM850 and the DCS1800 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM850 and DCS1800 bands", or, - the GSM850 and the DCS1900 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM850 and DCS1900 bands", or, - the P-GSM (or E-GSM or R-GSM) and the DCS1900 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM900 and DCS1900 bands". Trigger condition: Whenever a 44.018 Classmark Change message in the context of any establishment cause different from location update is received on Abis interface from the MS with a "Mobile Station Classmark 3" Information Element specifying that the MS supports: - the P-GSM (or E-GSM or R-GSM) and the DCS1800 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM900 and DCS1800 bands", or, - the GSM850 and the DCS1800 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM850 and DCS1800 bands", or, - the GSM850 and the DCS1900 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM850 and DCS1900 bands", or, - the P-GSM (or E-GSM or R-GSM) and the DCS1900 bands if the PLMN_FREQUENCY_BANDS parameter is set to "GSM900 and DCS1900 bands". The counter is incremented only once per SCCP connection in the serving cell, i.e. on receipt of the first 44.018 CLASSMARK CHANGE message. External comment:
--
Edition: 13 Released
Page 542
MC870
Counter Name : NB_INTRA_HO_REQ SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
MC871
Counter Name : NB_INTRA_HO_ATPT SFD reference : 3BK 10204 0413 DSZZA ("PM Counters Improvements in B6") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Edition: 13 Released
Page 543
MC8a
Counter Name : NB_CELL_PAGING_CMD SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: MC8A= SUM (all TRX_TS of the Cell) C8A Trigger condition: External comment:
--
MC8b
Counter Name : NB_CELL_IMM_ASS_CMD SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: MC8B= SUM (all TRX_TS of the Cell) C8B Trigger condition: External comment:
--
Edition: 13 Released
Page 544
MC8c
Counter Name : NB_CELL_CHAN_REQD SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: MC8C= SUM (all TRX_TS of the cell) C8C Trigger condition: External comment:
--
MC8d
Counter Name : NB_CELL_IMM_ASS_REJ SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Traffic Load Counter definition: MC8D= SUM (all TRX_TS of the cell) C8D Trigger condition: External comment:
--
Edition: 13 Released
Page 545
MC901
Counter Name : NB_Suspend_req SFD reference : 3BK 10204 0503 DTZZA ("GPRS suspend / resume for class B mobiles") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: Number of suspend requests. A request could lead to a success, a failure or a stop. Trigger condition: Emission of Suspend request by the BSC to the MFS A suspend message received from MS with a "suspend cause" filtered by BSC will not be counted. Stop causes could be: 1) External handover 2) MS channel failure.
MC902
Counter Name : Nb_Suspend_fail SFD reference : 3BK 10204 0503 DTZZA ("GPRS suspend / resume for class B mobiles") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: Number of suspend/resume procedure failures. Trigger condition: Reception of -Suspend nack or resume nack, or expiration of T_GPRS_Resume. External comment:
--
Edition: 13 Released
Page 546
MC903
Counter Name : Nb_Suspend_succ SFD reference : 3BK 10204 0503 DTZZA ("GPRS suspend / resume for class B mobiles") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Quality of Service Counter definition: Number of suspensions successes. Trigger condition: Reception of Resume ack message from MFS. External comment:
--
MC91
Counter Name : NB_INC_INT_SDCCH_HO_PREP_FAIL_CONG SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Handover Counter definition: MC91=C91, Number of incoming internal inter-cell SDCCH handover -preparation failures due to Trigger condition: Whenever a internal inter-cell SDCCH handover cannot be performed, because there is no free SDCCH Sub-channel to allocate the handover to. External comment:
--
Edition: 13 Released
Page 547
MC921a
Counter Name : NB_TCH_NOR_ASS_HO_REQ_ABLE_TO_PREEMP SFD reference : 3BK 10204 0308 DTZZA ("Pre-emption and eMLPP") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of TCH Normal Assignment- and incoming external TCH Handover/Directed Retry Requests with the ability to preempt another call with lower priority. Trigger condition: 1) Whenever the BSC receives a 48.008 ASSIGNMENT REQUEST message with the pre-emption capability indication set (pci bit=1 in the Priority IE), repetitions of the ASSIGNMENT REQUEST message in case of channel modification are not counted, or 2) Whenever the BSC receives a 48.008 HANDOVER REQUEST message requesting a TCH channel with i) the pre-emption capability indication set (pci bit=1) and Extra Information IE (or Old BSS to New BSS IE) is absent, or ii) the pre-emption capability indication set (pci bit = 1) and the Pre-emption Recommendation of the Extra Information IE is set (prec bit = 1). External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3:
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 548
MC921b
Counter Name : NB_PREEMPT_CAP_ALLOC_SUCC SFD reference : 3BK 10204 0308 DTZZA ("Pre-emption and eMLPP") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
External comment:
--
Domain: Quality of Service Counter definition: Number of preemption capable calls served with resources in the cell (with or without using the preemption feature). Trigger condition: Whenever the BSC has selected a channel to activate a TCH channel related to either 48.008 ASIGNMENT REQUEST, 48.008 VGCS/VBS ASSIGNMENT REQUEST, 48.008 HANDOVER REQUEST, 48.008 ESTABLISH INDICATION with the L3_INFORMATION field including a 44.018 NOTIFICATION RESPONSE message and the call has the ability to pre-empt another call with lower priority (i.e. pci = 1).
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3:
MC921c
Counter Name : NB_PREEMPTED_CALLS SFD reference : 3BK 10204 0308 DTZZA ("Pre-emption and eMLPP") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of pre-empted calls in the cell. Trigger condition: Whenever a 48.008 CLEAR REQUEST or UPLINK RELEASE INDICATION message with preemption cause is sent to the MSC. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3:
Edition: 13 Released
Page 549
MC921d
Counter Name : NB_PREEMPT_CAP_OUT_DR_ALLOC_SUCC SFD reference : 3BK 10204 0308 DTZZA ("Pre-emption and eMLPP") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of preemption capable call establishment requests that are successfully served in a neighbour cell with the help of the directed retry procedure. Trigger condition: Whenever a queued request for a preemption capable call is de-queued in the serving cell during the directed retry procedure because this call has been successfully established in the target cell. External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3:
Edition: 13 Released
Page 550
MC921e
Counter Name : NB_TCH_NOR_ASS_HO_SUCC_PREEMPTABLE SFD reference : 3BK 10204 0308 DTZZA ("Pre-emption and eMLPP") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
GSM
Domain: Quality of Service Counter definition: Number of TCH Normal Assignment- and incoming (internal and external) TCH Handover/Directed Retry Successes indicating the facility of being preempt-able by a call with a higher priority. Trigger condition: 1) Whenever the BSC sends a 48.008 ASSIGNMENT COMPLETE message and the context of the call indicates that the preemption vulnerability indication is set (pvi bit=1), or 2) Whenever the BSC sends a 48.008 HANDOVER COMPLETE message and the context of the call indicates that the preemption vulnerability indication is set (pvi bit=1), or 3) Whenever the BSC sends a 48.008 HANDOVER PERFORMED message and the context of the call indicates that the preemption vulnerability indication is set (pvi bit=1). External comment:
--
Sub domain-1: Telecom Procedure Sub domain-2: Normal Assignment Sub domain-3:
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 551
MC922a
Counter Name : NB_INC_EXT_3G_2G_HO_REQ SFD reference : 3BK 10204 0541 DTZZA ("B8 BSC Counter and Indicator Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of incoming external SDCCH and TCH HO requests from a UMTS system. Trigger condition: 48.008 HANDOVER REQUEST received by the BSC for an SDCCH or TCH external handover towards the target cell. Only handovers from a UMTS system shall be taken into account (if the field Cell Identifier discriminator in the I.E. Cell Identifier (serving) of the 48.008 HANDOVER REQUEST is set to 1011) External comment:
--
MC922b
Counter Name : NB_INC_EXT_3G_2G_HO_SUCC SFD reference : 3BK 10204 0541 DTZZA ("B8 BSC Counter and Indicator Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
Domain: Handover Counter definition: Number of incoming external SDCCH and TCH HO successes from a UMTS system. Trigger condition: 44.018HANDOVER_COMPLETE message received from the MS. Only handovers from a UMTS system shall be taken into account (if the field Cell Identifier discriminator in the I.E. Cell Identifier (serving) of the corresponding 48.008 HANDOVER REQUEST is set to 1011). External comment:
--
Edition: 13 Released
Page 552
MC922c
Counter Name : NB_INC_EXT_3G_2G_HO_EXEC_FAIL_MS_ACC SFD reference : 3BK 10204 0541 DTZZA ("B8 BSC Counter and Indicator Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
External comment:
--
Domain: Handover Counter definition: Number of incoming external TCH and SDCCH UMTS to GSM HO execution failures due to MS access problem, with or without reversion of the mobile to the old channel. Trigger condition: 1) Reception of 48.058CONNECTION FAILURE INDICATION (cause= "handover access failure") for a HO from a UMTS system. 2) Reception of 48.008CLEAR COMMAND (cause= "radio interface failure, reversion to old channel") for a HO from a UMTS system. Handovers from a UMTS system are identified as follows: the field Cell Identifier discriminator in the I.E. Cell Identifier (serving) of the 48.008 HANDOVER REQUEST is set to 1011)
Edition: 13 Released
Page 553
MC922d
Counter Name : NB_INC_EXT_3G_2G_HO_ATPT SFD reference : 3BK 10204 0541 DTZZA ("B8 BSC Counter and Indicator Improvements") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Technology
GSM
External comment:
--
Domain: Handover Counter definition: Number of incoming external SDCCH and TCH HO attempts from a UMTS system. Trigger condition: Whenever 48.008HANDOVER REQUEST ACK is sent by the target BSC containing the 44.018HANDOVER COMMAND towards the target cell. Only handovers from a UMTS system shall be taken into account (if the field Cell Identifier discriminator in the I.E. Cell Identifier (serving) of the corresponding 48.008 HANDOVER REQUEST is set to 1011)
MC922e
Counter Name : NB_INC_EXT_TCH_3G_2G_HO_EMERGENCY_REQ SFD reference : 3BK 10204 0616 DTZZA ("Load based 3G Handover filtering") Data collection Cumulative
Release Measured object Package 1 B9 Common cell
Technology
GSM
Domain: Handover Counter definition: Number of incoming 3G to 2G external inter-cell TCH (in HR or FR usage) handover requests, with emergency cause. Trigger condition: Whenever a 48.008 HANDOVER REQUEST is received for a TCH with a SAI in the source cell identifier and indicating an emergency cause (uplink quality, uplink strength, downlink quality, downlink strength, External comment:
--
Edition: 13 Released
Page 554
MC922f
Counter Name : NB_INC_EXT_TCH_3G_2G_HO_REQ SFD reference : 3BK 10204 0616 DTZZA ("Load based 3G Handover filtering") Data collection Cumulative
Release Measured object Package 1 B9 Common cell
Technology
GSM
Domain: Handover Counter definition: Number of incoming 3G to 2G external inter-cell TCH (in HR or FR usage) handover requests. Trigger condition: Whenever a 48.008 HANDOVER REQUEST is received for a TCH with a SAI in the source cell identifier External comment:
--
MC922g
Counter Name : NB_INC_EXT_TCH_3G_2G_HO_PREP_FAIL_3GCON SFD reference : 3BK 10204 0616 DTZZA ("Load based 3G Handover filtering") Data collection Cumulative
Release Measured object Package 1 B9 Common cell
Technology
GSM
Domain: Handover Counter definition: Number of 3G to 2G TCH hand over failures in preparation phase due to 3G high load in the target cell. Trigger condition: Whenever a 48.008 HANDOVER FAILURE message is sent to the MSC with cause "no radio resource available" for a TCH HO request coming from 3G, due to 3G high load in the target cell. This counter shall be incremented only if THR_CELL_LOAD_3G_REJECT < 100%. External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Sub domain-3:
Edition: 13 Released
Page 555
MC922h
Counter Name : TIME_3G_HOReject_HL SFD reference : 3BK 10204 0616 DTZZA ("Load based 3G Handover filtering") Data collection Cumulative
Release Measured object Package 1 B9 Common cell
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Cumulative time (in seconds) during which the Cell is in 3G high load state. Trigger condition: Whenever the 3G_HOReject_Load State in the cell is reported as high or reported as indefinite while the previous state was high. This counter shall be incremented only if THR_CELL_LOAD_3G_REJECT < External comment:
--
Sub domain-1: Resource Allocation & Management Sub domain-2: Sub domain-3:
MC923a
Counter Name : NB_LCS_REQ SFD reference : 3BK 10204 0540 DTZZA ("Location services (LCS)") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
LCS
Domain: Quality of Service Counter definition: Number of LCS requests received from the MSC in CS domain. The LCS requests encompass the geographic location requests and the LCS assistance data requests. Trigger condition: Whenever a 48.008 PERFORM LOCATION REQUEST message is received by the BSC from the MSC. External comment:
--
Edition: 13 Released
Page 556
MC923b
Counter Name : NB_LCS_SUCC SFD reference : 3BK 10204 0540 DTZZA ("Location services (LCS)") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
LCS
Domain: Quality of Service Counter definition: Number of successful LCS requests.The successful LCS requests encompass the successful geographic location estimate and the successful LCS assistance data delivery. Trigger condition: Whenever a 48.008 PERFORM LOCATION RESPONSE message is sent to the MSC without including the OIE LCS Cause. External comment:
--
MC923c
Counter Name : NB_LCS_FAIL_LB SFD reference : 3BK 10204 0540 DTZZA ("Location services (LCS)") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
LCS
Domain: Quality of Service Counter definition: Number of LCS requests rejected by the SMLC. The failed LCS requests indicated by the SMLC to the BSC encompass the failure to determine geographic location estimate and the failure of LCS assistance data delivery. Trigger condition: Whenever a 09.31 PERFORM LOCATION RESPONSE message is received from the SMLC with the OIE LCS Cause. External comment:
--
Edition: 13 Released
Page 557
MC923d
Counter Name : NB_LCS_ABORT SFD reference : 3BK 10204 0540 DTZZA ("Location services (LCS)") Data collection Cumulative
Release B8 B9 Measured object Common cell Common cell Package 0 1
Measured unit:
Technology
LCS
Domain: Quality of Service Counter definition: Number of LCS procedures aborted on request from the MSC in CS domain. Trigger condition: Whenever a 48.008 PERFORM LOCATION ABORT message is received by the BSC from the MSC while an LCS procedure is ongoing. External comment:
--
MC924a
Counter Name : TIME_SPDCH_LIMIT_HIGH_LOAD SFD reference : 3BK 10204 0609 DTZZA ("Autonomous Packet Resource Allocation (RAE-4)") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Technology
GPRS
Domain: Traffic Load Counter definition: Time during which the cell is in high load situation for PS traffic. This situation impacts the number of slave PDCHs that can be allocated to the MFS. Trigger condition: The timer starts whenever MAX_SPDCH_LIMIT calculated by the BSC is equal or below MAX_SPDCH_HIGH_LOAD. MAX_SPDCH_HIGH_LOAD is calculated by the BSC based on MAX_PDCH_HIGH_LOAD and NB_TS_MPDCH O&M parameters. External comment: The timer stops when MAX_SPDCH_LIMIT is greater than MAX_SPDCH_HIGH_LOAD.
Edition: 13 Released
Page 558
MC924b
Counter Name : NB_OUT_2G_3G_HO_REQ SFD reference : 3BK 10204 0615 DTZZA ("2G to 3G Handover") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing external TCH (in HR or FR usage) handover requests to a 3G cell. Trigger condition: Whenever a 48.008 HANDOVER REQUIRED message is sent on A interface to the MSC for a TCH handover to a 3G FDD cell. 48.008 HANDOVER REQUIRED is sent in following situations : 1) An external handover alarm has been raised, with corresponding list of candidate cells including a 3G cell. 2) The list of candidate cells for the current alarm has been updated. External comment:
--
Edition: 13 Released
Page 559
MC924c
Counter Name : NB_OUT_2G_3G_HO_SUCC SFD reference : 3BK 10204 0615 DTZZA ("2G to 3G Handover") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing external TCH (in HR or FR usage) handover successes to a 3G cell. Trigger condition: Whenever a 48.008 CLEAR COMMAND message with a cause value of "handover successful" is received on A interface on the serving BSC from the MSC for a TCH handover to a 3G cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
MC924d
Counter Name : NB_OUT_2G_3G_HO_ATPT SFD reference : 3BK 10204 0615 DTZZA ("2G to 3G Handover") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing external TCH (in HR or FR usage) handover attempts to a 3G cell. Trigger condition: Whenever the 44.018 HANDOVER COMMAND message is sent on Abis interface on the serving channel, during an external TCH handover procedure to a 3G cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 560
MC924e
Counter Name : NB_OUT_2G_3G_HO_EXEC_FAIL_NO_REV SFD reference : 3BK 10204 0615 DTZZA ("2G to 3G Handover") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing external TCH (in HR or FR usage) handover execution failures to a 3G cell due to MS access problem without reversion of the mobile to the old channel (call drop). Trigger condition: Whenever the timer supervising the handover procedure on the serving cell (T3121), expires during an external TCH handover to a 3G cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
MC924f
Counter Name : NB_OUT_2G_3G_HO_EXEC_FAIL_REV SFD reference : 3BK 10204 0615 DTZZA ("2G to 3G Handover") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Number of outgoing external TCH (in HR or FR usage) handover -execution failures to a 3G cell due to MS access problem with reversion of the mobile to the old channel. Trigger condition: Whenever a 44.018 HANDOVER FAILURE message is received on Abis interface from the serving cell , during an external TCH handover to a 3G cell. External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 561
MC924g
Counter Name : NB_OUT_2G_3G_HO_PREP_FAIL SFD reference : 3BK 10204 0615 DTZZA ("2G to 3G Handover") Data collection Cumulative
Release Measured object Package 2 B9 Common cell
Measured unit:
Technology
GSM
Domain: Handover Counter definition: Nb of outgoing TCH handover -preparation failures to a 3G cell. Trigger condition: Whenever a 48.008 HANDOVER REQUIRED REJECT is received from the MSC by the serving BSC for an outgoing external TCH HO to a 3G cell. Note : the counter will be incremented for external TCH HO if and only if the parameter RESP_REQ is set External comment:
--
MC924h
Counter Name : SFD reference : Data collection
Release B9
NB_2G_3G_HO_8
Measured object Common cell Package 2
Measured unit:
Technology
Domain: Not displayed Counter definition: Provision for 2G to 3G HO Trigger condition: External comment:
--
Edition: 13 Released
Page 562
MC924i
Counter Name : SFD reference : Data collection
Release B9
NB_2G_3G_HO_9
Measured object Common cell Package 2
Measured unit:
Technology
Domain: Not displayed Counter definition: Provision for 2G to 3G HO Trigger condition: External comment:
--
MC924j
Counter Name : SFD reference : Data collection
Release B9
NB_2G_3G_HO_10
Measured object Common cell Package 2
Measured unit:
Technology
Domain: Not displayed Counter definition: Provision for 2G to 3G HO Trigger condition: External comment:
--
Edition: 13 Released
Page 563
MC924k
Counter Name : SFD reference : Data collection
Release B9
NB_2G_3G_HO_11
Measured object Common cell Package 2
Measured unit:
Technology
Domain: Not displayed Counter definition: provision for 2G to 3G HO Trigger condition: External comment:
--
MN1.1
Counter Name : TIME_N7_ALIGNED SFD reference : No reference. Data collection Cumulative
Release B8 B9 Measured object N7 Signalling Link N7 Signalling Link Package 0 1
Measured unit:
Technology
GSM
Domain: Resource Availability & Usage Counter definition: Time (in seconds) during which the N7 SL is correctly aligned. Trigger condition: Whenever the No.7 Signalling channel between the MSC and BSS is correctly aligned, this counter will be incremented every second. External comment:
--
Edition: 13 Released
Page 564
Type number: Type name: Type scope (per BSS): Candidate for Standard BSC Yes
Counter - 180
Evolium
Type limitations (per BSS): - In Standard usage: none - In Detailed usage: none
Type definition: Set of incoming external or internal inter-cell SDCCH or TCH (in HR or FR usage) handover counters provided per adjacency: variable serving cell - variable target cell. The internal and external directed retries are counted. Only handovers / directed retries from 2G cells are taken into account (i.e. handovers from 3G are not counted in type 180).
C400
Counter Name : NB_ADJ_BSC_INC_HO_REQ SFD reference : 3BK 10204 0411 DSZZA ("Traffic Flow Measurements") Data collection Cumulative
Release B8 B9 Measured object Adjacency Adjacency-CGI Package 0 1
Measured unit:
Technology
GSM
Domain: Adjacency Counter definition: Number of incoming 2G to 2G external or internal inter-cell SDCCH or TCH (in HR or FR usage) handover requests. The internal and external directed retries are counted. Trigger condition: 1) Internal handover : whenever an internal inter-cell SDCCH or TCH handover is initiated by the handover process within the BSC from the serving cell to the target cell. 2) External handover : 48.008 HANDOVER REQUEST received (including the MIE "Cell identifier" of the serving cell) by the BSC for an SDCCH or TCH external handover towards the target cell. Only handovers from a 2G cell shall be taken into account (if the field Cell Identifier discriminator in the I.E. Cell Identifier (serving) of the 48.008 HANDOVER REQUEST is set to 0000 or 0001). External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 565
C401
Counter Name : NB_ADJ_BSC_INC_HO_ATPT SFD reference : 3BK 10204 0411 DSZZA ("Traffic Flow Measurements") Data collection Cumulative
Release B8 B9 Measured object Adjacency Adjacency-CGI Package 0 1
Measured unit:
Technology
GSM
Domain: Adjacency Counter definition: Number of incoming 2G to 2G external or internal inter cell SDCCH or TCH (in HR or FR usage) handover attempts. The internal and external directed retries are counted. Trigger condition: 1) Internal handover : 44.018 HANDOVER COMMAND sent to the MS via the serving cell for an internal inter-cell SDCCH or TCH handover towards the target cell. 2) External handover : 48.008 HANDOVER REQUEST ACK sent to the MSC from the target BSC for an external SDCCH or TCH handover from the serving cell to the target cell. The MIE "Cell-Identifier" of the serving cell&target cell are provided in 48.008 HANDOVER REQUEST. Only handovers from a 2G cell shall be taken into account (if the field Cell Identifier discriminator in the I.E. Cell Identifier (serving) of the 48.008 HANDOVER REQUEST is set to 0000 or 0001). External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 566
C402
Counter Name : NB_ADJ_BSC_INC_HO_SUCC SFD reference : 3BK 10204 0411 DSZZA ("Traffic Flow Measurements") Data collection Cumulative
Release B8 B9 Measured object Adjacency Adjacency-CGI Package 0 1
Measured unit:
Technology
GSM
Domain: Adjacency Counter definition: Number of incoming 2G to 2G external or internal inter cell SDCCH or TCH (in HR or FR usage) handover successes. The internal and external directed retries are counted. Trigger condition: 44.018HANDOVER_COMPLETE message received from the MS via the target cell for an external or internal inter-cell SDCCH or TCH handover from the serving cell. Only handovers from a 2G cell shall be taken into account (if the field Cell Identifier discriminator in the I.E. Cell Identifier (serving) of the 48.008 HANDOVER REQUEST is set to 0000 or 0001). External comment:
--
Note: This counter counts both inter-PLMN and intra-PLMN handover events.
Edition: 13 Released
Page 567
ANNEX
Evolium
The information given in this report is complementary to the information given in the "OMC-BSS file format specification" document (3BK 11204 0321 DSZZA). Details on blocks of observations and RMS (i.e. types 10 to 15 and 31) can be found in the OMC-BSC file format specification. The block length indicated here corresponds to the sum of the Entity Selector Size and the size of the counter block.
Block layout
Type
1
C01 C02 C04 C07 C10 C137 C138 C14a C14c C147 C148 C149 C850 C02a C02b C02c C02d C02e C02f C02g C02h C442
Traffic measurements
Entity Selector
Offset Short
Name
Block
224
NB_IMM_ASS_SUCC_MT NB_IMM_ASS_SUCC_MO NB_IMM_ASS_PREP_FAIL_CONG NB_SDCCH_DROP_OUT_HO NB_INC_SDCCH_HO_SUCC NB_SDCCH_DROP_EST_PHAS_BSS_PB NB_SDCCH_DROP_EST_PHAS_RLF NB_TCH_DROP_HO_PREP_EXEC_FAIL_BSS_PB NB_TCH_DROP_EST_PHAS_BSS_PB NB_INC_SDCCH_HO_ALLOC NB_IMM_ASS_ALLOC NB_IMM_ASS_EXEC_FAIL_RADIO NB_MULTIBAND_MS_ACCESS_EXCEPT_LU_CELL NB_IMM_ASS_SUCC_MO_LOC_UPD NB_IMM_ASS_SUCC_MO_SMS NB_IMM_ASS_SUCC_MO_SUP_SERV NB_IMM_ASS_SUCC_MO_FOLLOW_ON NB_IMM_ASS_SUCC_MO_CM_REEST NB_IMM_ASS_SUCC_MO_L3INFO_UNKNOW NB_IMM_ASS_SUCC_MO_IMSI_DETACH NB_IMM_ASS_SUCC_MO_CALL_EST NB_TIMES_TRAF_DETECTED_HIGH
Length
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Edition: 13 Released
Page 568
88 92 96 100 104 108 112 116 120 124 128 132 136 140 144 148 152 156 160 164 168 172 176 180 184 188 192 196 200 204 208 212 216 220
C443 C03 C13a C13b C15a C15b C812 C612a C612b C612c C612d C161a C161b C162a C162b C162c C170 C171 C701a C701b C701c C701d C701e C702a C702b C702c C704a C704b C705 C706 C901 C902 C903 C02i
Evolium NB_TIMES_TRAF_DETECTED_LOW NB_OUT_SDCCH_HO_SUCC NB_TCH_NOR_ASS_QUEUED NB_INC_EXT_TCH_HO_QUEUED NB_INC_IDR_ALLOC NB_INC_TCH_HO_ALLOC NB_TCH_NOR_ASS_PREP_FAIL_CONG_R_ABIS NB_TCH_NOR_ASS_PREP_FAIL_NO_QUEUE NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_FULL NB_TCH_NOR_ASS_PREP_FAIL_T11_EXP NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_REJ NB_DTAP_MO_NOR_ASS_SUCC NB_DTAP_MT_NOR_ASS_SUCC NB_TCH_DROP_DTAP_EST_PHAS_RLF NB_TCH_DROP_DTAP_EST_PHAS_BSS_PB NB_TCH_DROP_DTAP_EST_PHAS_REM_TRANS_ FAIL NB_CALL_TFO NB_TFO_CODEC_REQ NB_TCH_FR_REQ NB_TCH_DR_REQ NB_TCH_DR_EFR_REQ NB_TCH_AMR_REQ NB_TCH_DATA_REQ NB_TCH_NOR_FR_ALLOC NB_TCH_NOR_HR_ALLOC NB_TCH_NOR_EFR_ALLOC NB_TCH_NOR_AMR_FR_ALLOC NB_TCH_NOR_AMR_HR_ALLOC NB_TCH_NOR_DATA_ALLOC NB_EGSM_MS_ACCESS_EXCEPT_LU NB_Suspend_req Nb_Suspend_fail Nb_Suspend_succ NB_IMM_ASS_SUCC_MO_LCS
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Edition: 13 Released
Page 569
Offset Short
C621 C703 C710 C711 C712 C713 C714 C717a C717b C718 C736 C739 C746b
Entity Selector
Evolium
Name
Block
27
NB_TCH_DROP_OUT_HO_EXEC_TRX NB_TCH_NOR_ASS_ALLOC_TRX NB_TCH_OUT_HO_REQ_TRX NB_TCH_OUT_HO_PREP_FAIL_CONG_TRX NB_TCH_OUT_HO_SUCC_TRX NB_TCH_OUT_HO_FAIL_REV_TRX NB_TCH_OUT_HO_FAIL_NO_REV_TRX NB_INC_IDR_SUCC_TRX NB_INC_TCH_HO_SUCC_TRX NB_TCH_NOR_ASS_SUCC_TRX NB_TCH_DROP_EST_PHAS_RLF_TRX NB_TCH_DROP_EST_PHAS_REM_TRANS_FAIL_T RX NB_TCH_NOR_ASS_EXEC_FAIL_RADIO_TRX
Length
2 2 2 2 2 2 2 2 2 2 2 2 2
Type
2
C24
Offset Short
C250 C26 C320a C320b C320c C320d C320e C27 C28a C29a C30 C31 C34 C803
Name
Block
32
AV_NB_NOT_AVAIL_TRX_TS AV_NB_AVAIL_TCH AV_NB_AVAIL_SDCCH AV_NB_IDLE_TCH_INTERF_BAND1 AV_NB_IDLE_TCH_INTERF_BAND2 AV_NB_IDLE_TCH_INTERF_BAND3 AV_NB_IDLE_TCH_INTERF_BAND4 AV_NB_IDLE_TCH_INTERF_BAND5 AV_NB_AVAIL_CCCH AV_NB_BUSY_CS_TS NB_MAX_SIMUL_BUSY_CS_TS AV_NB_BUSY_SDCCH NB_MAX_SIMUL_BUSY_SDCCH TIME_ALL_AVAIL_TRX_TS_BUSY TIME_SDCCH_CONGESTION
Length
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Edition: 13 Released
Page 570
30
C141
Evolium AV_NB_TCH_QUEUED
Type
3
C8c
Offset Short
C8b C8a C8d
Name
Block
16
Length
4 4 4 4
Type
4
C39 C40
Offset Short
Name
Block
NB_TIMES_SDCCH_BUSY TIME_SDCCH_BUSY
Length
4 4
Type
5
C370a C370b C380a C380b C381a C381b
Offset Short
Name
Block
24
Length
4 4 4 4 4 4
Type
6
C42 C43 C541 C46 C45a C48
Offset Short
Name
Block
196
Length
4 2 2 4 4 2
Edition: 13 Released
Page 571
C47 C56 C57 C58 C55a C551 C52 C53 C561 C62 C63 C67 C470 C471 C472 C473 C474 C75 C476 C477 C478 C585a C585d C585e C585f C541a C41b C586a C586b C586c C479 C50 C60 C411
Evolium NB_OUT_EXT_TCH_HO_EXEC_FAIL_REV NB_OUT_INT_TCH_HO_SUCC NB_OUT_INT_TCH_HO_EXEC_FAIL_REV NB_OUT_INT_TCH_HO_EXEC_FAIL_NO_REV NB_OUT_INT_TCH_HO_REQ NB_INC_INT_TCH_HO_PREP_FAIL_CONG_R_ABI S NB_INC_INT_TCH_HO_SUCC NB_INC_INT_TCH_HO_EXEC_FAIL_MS_ACCESS NB_INTRA_TCH_HO_PREP_FAIL_CONG_R_ABIS NB_INTRA_TCH_HO_SUCC NB_INTRA_TCH_HO_EXEC_FAIL_NO_REV NB_INTRA_TCH_HO_EXEC_FAIL_REV NB_TCH_HO_ATPT_2_TooLowQualUp NB_TCH_HO_ATPT_3_TooLowLevUp NB_TCH_HO_ATPT_4_TooLowQualDown NB_TCH_HO_ATPT_5_TooLowLevDown NB_TCH_HO_ATPT_6_TooLongDistance NB_TCH_HO_MSC_TRIG NB_TCH_HO_ATPT_15_TooHighLevInterfUp NB_TCH_HO_ATPT_16_TooHighLevInterfDown NB_TCH_HO_ATPT_12_TooLowPowBudg NB_TCH_HO_ATPT_7_ConsBadSACCHmicroCell NB_TCH_HO_ATPT_17_TooLowLevUpMicroCell NB_TCH_HO_ATPT_18_TooLowLevDownMicroCell NB_TCH_HO_ATPT_14_HighLevNeigLowCellSlowM S NB_INC_EXT_TCH_HO_PREP_FAIL_CONG_R_ABI S NB_INC_EXT_TCH_HO_PREP_FAIL_NO_TTCH NB_TCH_HO_ATPT_10_TooLowLevUpInZone NB_TCH_HO_ATPT_11_TooLowLevDownInZone NB_TCH_HO_ATPT_13_TooHighLevUpDownOutZo ne NB_TCH_HO_ATPT_21_HighLevNeigCellPrefBand NB_OUT_EXT_TCH_HO_ATPT NB_OUT_INT_TCH_HO_ATPT NB_OUT_INT_TCH_HO_IDR_IN_ZONE_REQ
2 4 2 2 4 2 4 2 2 4 2 2 4 4 4 4 4 4 4 4 4 4 4 4 4 2 2 4 4 4 4 4 4 4
Edition: 13 Released
Page 572
134 136 140 144 148 152 156 160 164 168 172 176 180 184 188 192
C412 C413 C440 C444 C450 C220 C221 C230 C231 C270 C271 C447 C448 C449 C460 C461
Evolium NB_OUT_INT_TCH_HO_IDR_IN_ZONE_EXEC_FAIL NB_TCH_NOR_ASS_INNER_ZONE_ALLOC NB_TCH_HO_ATPT_23_TrafHandover NB_TCH_HO_ATPT_24_GenCaptureHandover NB_TCH_HO_ATPT_22_TooShortDistance NB_INC_EXT_TCH_HO_REQ NB_INC_EXT_TCH_HO_ATPT NB_INC_INT_TCH_HO_REQ NB_INC_INT_TCH_HO_ATPT NB_INTRA_TCH_HO_REQ NB_INTRA_TCH_HO_ATPT NB_TCH_HO_ATPT_26_BadQualHR NB_TCH_HO_ATPT_27_GoodQualFR NB_TCH_HO_ATPT_28_FastTraffic NB_TCH_HO_ALLOC_EMERGENCY_PRES NB_TCH_HO_ATPT_29_TFO
2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Type
7
L1.1 L1.2 L1.15 L1.5 L1.6 L1.12 L1.16 L1.17 L1.18
LapD measurements
Entity Selector
Offset Short
Name
Block
36
Length
4 4 4 4 4 4 4 4 4
Type
8
X3.20 X3.21
X25 measurements
Entity Selector
Offset Short
Name
Block
NB_X25_INC_CALL_SUCC_CLOSED NB_X25_OUT_CALL_SUCC_CLOSED
Length
2 2
Page 573
4 6
X3.22 X3.23
2 2
Type
9
N1.1 N1.2 N1.3 N1.4 N1.5 N1.6 N1.7 N1.10 N1.11 N1.12 N2.7 N2.9 N3.7 N3.10 N3.11 N1.8 N1.9 N3.1 N3.2 N3.3 N3.4 N3.5
N7 measurements
Entity Selector
Offset Short
Name
Block
62
TIME_N7_ALIGNED NB_N7_LINK_FAIL_ANY_CAUSE NB_N7_LINK_FAIL_FIB_BSN NB_N7_LINK_FAIL_T7_EXP NB_N7_LINK_FAIL_SU_ERROR_RATE NB_N7_LINK_FAIL_CONG NB_N7_LINK_FAIL_ALIGNMENT NB_N7_CHANGEOVER NB_N7_CHANGEBACK NB_N7_RESTORATION TIME_N7_UNAVAIL_ERROR_SL TIME_N7_UNAVAIL_MSC_PROC_OUTAGE TIME_N7_UNAVAIL_CONG NB_N7_MSU_DISC_DUE_CONG NB_N7_CONG_WITH_MSU_LOST NB_N7_SU_REC_WITH_ERROR NB_N7_NEG_ACK_REC NB_N7_SIF_SIO_SENT NB_N7_OCTETS_RESENT NB_N7_MSU_SENT NB_N7_SIF_SIO_REC NB_N7_MSU_REC
Length
4 2 2 2 2 2 2 2 2 2 2 2 2 4 2 4 4 4 4 4 4 4
Offset Short
N4.2
Entity Selector
Name
Block
TIME_N7_UNAVAIL_LINK_SET
Length
Type
18
A interface measurements
Entity Selector
Offset Short
Name
Block
72
Length
Page 574
0 4 8 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68
C180a C180b C180c C180d C180e C181a C181b C181c C181d C181e C181f C181g C181h C181i C181j C181k C181l C182
Evolium NB_N7_CLEAR_REQ_RadioIntMessFail NB_N7_CLEAR_REQ_O&Minterv NB_N7_CLEAR_REQ_EquipFail NB_N7_CLEAR_REQ_RadioIntFail NB_N7_CLEAR_REQ_NoRadioResAvail NB_N7_ASS_FAIL_RadioIntMessFail NB_N7_ASS_FAIL_O&Minterv NB_N7_ASS_FAIL_EquipFail NB_N7_ASS_FAIL_NoRadioResAvail NB_N7_ASS_FAIL_ReqTerResUnav/Alloc NB_N7_ASS_FAIL_ReqTrans/RateUnav NB_N7_ASS_FAIL_RadioIntFailRevOldChan NB_N7_ASS_FAIL_RadioIntFail NB_N7_ASS_FAIL_CipherAlgoNotSupp NB_N7_ASS_FAIL_BSSnotEquip NB_N7_ASS_FAIL_ProtocolError NB_N7_ASS_FAIL_ReqSpeechVersUnav NB_N7_CLEAR_REQ_EST_PHAS
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Offset Short
C750 C751
Entity Selector
Name
Block
TIME_A_CHANNEL_BUSY NB_A_CHANNEL_ALLOC
Length
4 4
Type
19
SMS PP measurements
Entity Selector
Offset Short
C190 C191 C192 C193 C194a C194b C194c C195
Name
Block
32
Length
4 4 4 4 4 4 4 4
Edition: 13 Released
Page 575
Evolium
Type
25
SCCP measurements
Entity Selector
Offset Short
C251 C252 C253 C254 C255 C256 C257 C258 C153a C153b
Name
Block
40
NB_N7_UNIT_DATA_SENT NB_N7_UNIT_DATA_REC NB_N7_CON_REQ_SENT NB_N7_CON_REQ_REC NB_N7_CON_CONF_SENT NB_N7_CON_CONF_REC NB_N7_CON_REF_SENT NB_N7_CON_REF_REC NB_N7_CON_EST_FAIL_DUE_NSS NB_N7_CON_EST_FAIL_DUE_BSS
Length
4 4 4 4 4 4 4 4 4 4
Type
26
Offset Short
C720 C721 C722 C723 C724 C725 C727 C728
Name
Block
24
NB_ADJ_SCELL_OUT_TCH_HO_ATPT NB_ADJ_SCELL_OUT_TCH_HO_SUCC NB_ADJ_SCELL_OUT_TCH_HO_EXEC_FAIL_REV NB_ADJ_SCELL_OUT_TCH_HO_EXEC_FAIL_NO_ REV NB_ADJ_SCELL_OUT_TCH_HO_EMERGENCY_AT PT NB_ADJ_SCELL_OUT_TCH_HO_BETTERCELL_AT PT NB_ADJ_SCELL_OUT_TCH_HO_TRAFFIC_ATPT NB_ADJ_SCELL_OUT_ FORCED_DR_ATPT
Length
2 2 2 2 4 4 4 4
Type
27
Offset Short
C730 C731 C733 C734 C735
Name
Block
26
Length
2 2 2 4 4 Page 576
14 18 22
4 4 4
Type
28
SDCCH handover
Entity Selector
Offset Short
C82 C83 C81 C86 C85a C88 C87 C96 C97 C98 C95a C91 C92 C93 C101 C102 C103 C107 C510 C511 C512 C513 C514 C115 C516 C517 C518
Name
Block
154
NB_INC_EXT_SDCCH_HO_SUCC NB_INC_EXT_SDCCH_HO_EXEC_FAIL_MS_ACCE SS NB_INC_EXT_SDCCH_HO_PREP_FAIL_CONG NB_OUT_EXT_SDCCH_HO_SUCC NB_OUT_EXT_SDCCH_REAL_HO_REQ NB_OUT_EXT_SDCCH_HO_EXEC_FAIL_NO_REV NB_OUT_EXT_SDCCH_HO_EXEC_FAIL_REV NB_OUT_INT_SDCCH_HO_SUCC NB_OUT_INT_SDCCH_HO_EXEC_FAIL_REV NB_OUT_INT_SDCCH_HO_EXEC_FAIL_NO_REV NB_OUT_INT_SDCCH_HO_REQ NB_INC_INT_SDCCH_HO_PREP_FAIL_CONG NB_INC_INT_SDCCH_HO_SUCC NB_INC_INT_SDCCH_HO_EXEC_FAIL_MS_ACCES S NB_INTRA_SDCCH_HO_PREP_FAIL_CONG NB_INTRA_SDCCH_HO_SUCC NB_INTRA_SDCCH_HO_EXEC_FAIL_NO_REV NB_INTRA_SDCCH_HO_EXEC_FAIL_REV NB_SDCCH_HO_ATPT_2_TooLowQualUp NB_SDCCH_HO_ATPT_3_TooLowLevUp NB_SDCCH_HO_ATPT_4_TooLowQualDown NB_SDCCH_HO_ATPT_5_TooLowLevDown NB_SDCCH_HO_ATPT_6_TooLongDistance NB_SDCCH_HO_MSC_TRIG NB_SDCCH_HO_ATPT_15_TooHighLevInterfUp NB_SDCCH_HO_ATPT_16_TooHighLevInterfDown NB_SDCCH_HO_ATPT_12_TooLowPowBudg
Length
4 2 2 4 4 2 2 4 2 2 4 2 4 2 2 4 2 2 4 4 4 4 4 4 4 4 4
Edition: 13 Released
Page 577
86 90 94 98 102 106 110 114 118 122 126 130 134 138 142 146 150
C605a C605d C605e C605f C607 C519 C90 C100 C445 C446 C454 C310 C311 C330 C331 C360 C361
Evolium NB_SDCCH_HO_ATPT_7_ConsBadSACCHmicroC ell NB_SDCCH_HO_ATPT_17_TooLowLevUpMicroCell NB_SDCCH_HO_ATPT_18_TooLowLevDownMicroC ell NB_SDCCH_HO_ATPT_14_HighLevNeigLowCellSl owMS NB_SDCCH_HO_ATPT_20_HighLevNeigCellForcD R NB_SDCCH_HO_ATPT_21_HighLevNeigCellPrefBa nd NB_OUT_EXT_SDCCH_HO_ATPT NB_OUT_INT_SDCCH_HO_ATPT NB_SDCCH_HO_ATPT_23_TrafHandover NB_SDCCH_HO_ATPT_24_GenCaptureHandover NB_SDCCH_HO_ATPT_22_TooShortDistance NB_INC_EXT_SDCCH_HO_REQ NB_INC_EXT_SDCCH_HO_ATPT NB_INC_INT_SDCCH_HO_REQ NB_INC_INT_SDCCH_HO_ATPT NB_INTRA_SDCCH_HO_REQ NB_INTRA_SDCCH_HO_ATPT
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Type
29
Offset Short
C142a C142b C142c C142d C143a C143b C143c C143d C143e C143f C143g C143h C144a
Name
Block
80
NB_OUT_FORCED_IDR_SUCC NB_OUT_FORCED_EDR_SUCC NB_OUT_NOR_IDR_SUCC NB_OUT_NOR_EDR_SUCC NB_OUT_FORCED_IDR_EXEC_FAIL_REV NB_OUT_FORCED_IDR_EXEC_FAIL_NO_REV NB_OUT_FORCED_EDR_EXEC_FAIL_REV NB_OUT_FORCED_EDR_EXEC_FAIL_NO_REV NB_OUT_NOR_IDR_EXEC_FAIL_REV NB_OUT_NOR_IDR_EXEC_FAIL_NO_REV NB_OUT_NOR_EDR_EXEC_FAIL_REV NB_OUT_NOR_EDR_EXEC_FAIL_NO_REV NB_OUT_FORCED_IDR_REQ
Length
4 4 4 4 2 2 2 2 2 2 2 2 4
Edition: 13 Released
Page 578
36 40 44 48 52 56 60 64 68 70 74 78
C144b C144c C144d C145a C145b C145c C145d C151 C152 C153 C154 C555
Evolium NB_OUT_FORCED_EDR_REQ NB_OUT_NOR_IDR_REQ NB_OUT_NOR_EDR_REQ NB_OUT_FORCED_IDR_ATPT NB_OUT_FORCED_EDR_ATPT NB_OUT_NOR_IDR_ATPT NB_OUT_NOR_EDR_ATPT NB_INC_IDR_SUCC (29) NB_INC_IDR_EXEC_FAIL_MS_ACCESS NB_INC_IDR_REQ NB_INC_IDR_ATPT NB_INC_IDR_PREP_FAIL_CONG_R_ABIS
4 4 4 4 4 4 4 4 2 4 4 2
Type
30
SMS CB measurements
Entity Selector
Offset Short
CB601 CB602 CB603 CB604
Name
Block
12
Length
4 4 2 2
Type
32
Offset Short
C403a C403b C404a C404b C420a C420b C421a C421b
Name
Block
32
Length
4 4 4 4 4 4 4 4
Type
Edition: 13 Released
33
Offset Short
E01 E02
Entity Selector
Evolium
Name
Block
EME_PWR_GSM EME_PWR_DCS
Length
2 2
Type
34
Offset Short
V11 V17
Name
Block
NB_TALKER_CHANGE_VGCS NB_VGCS_ESTABLISHED
Length
2 2
Offset Short
V01 V021 V022 V03 V04 V05 V06 V07 V08 V09 V10 V12 V13 V14 V15 V16 V18 V19 V20
Entity Selector
Name
Block
38
NB_PTP_CALL_PREEMPTED_VGCS AV_PARALLEL_TCH_VGCS MAX_PARALLEL_TCH_VGCS NB_VGCS_ESTABLISHMENT_REQ NB_VGCS_ESTABLISHMENT_SUCC NB_CM_SERV_REQ_VGCS NB_VGC_RELEASED_VGCS NB_OUT_VGCS_HO_ATPT NB_OUT_VGCS_HO_SUCC NB_INC_VGCS_HO_SUCC NB_INC_VGCS_HO_ATPT NB_VGC_BLOCKED_VGCS NB_VGCS_NOTIFIFICATION_FACCH NB_ASS_REQ_ABLE_PREEMT NB_VGCS_ASS_REQ_ABLE_TO_PREEMPT NB_VGCS_QUEUED NB_PREEMTED_TCH_VGCS NB_PAGING_FACCH VGCS20
Length
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Type
110
Overview measurements
Entity Selector
Offset Short
Name
Block
194
Length
Page 580
MC01 MC02 MC02a MC02b MC02c MC02d MC02e MC02f MC02g MC02h MC03 MC04 MC07 MC10 MC13a MC13b MC14a MC14c MC15a MC15b MC137 MC138 MC147 MC148 MC149 MC24 MC27 MC141 MC8a MC8b MC8c MC8d MC541a MC41b
Evolium NB_IMM_ASS_SUCC_MT NB_IMM_ASS_SUCC_MO NB_IMM_ASS_SUCC_MO_LOC_UPD NB_IMM_ASS_SUCC_MO_SMS NB_IMM_ASS_SUCC_MO_SUP_SERV NB_IMM_ASS_SUCC_MO_FOLLOW_ON NB_IMM_ASS_SUCC_MO_CM_REEST NB_IMM_ASS_SUCC_MO_L3INFO_UNKNOW NB_IMM_ASS_SUCC_MO_IMSI_DETACH NB_IMM_ASS_SUCC_MO_CALL_EST NB_OUT_SDCCH_HO_SUCC NB_IMM_ASS_PREP_FAIL_CONG NB_SDCCH_DROP_OUT_HO NB_INC_SDCCH_HO_SUCC NB_TCH_NOR_ASS_QUEUED NB_INC_EXT_TCH_HO_QUEUED NB_TCH_DROP_HO_PREP_EXEC_FAIL_BSS_PB NB_TCH_DROP_EST_PHAS_BSS_PB NB_INC_IDR_ALLOC NB_INC_TCH_HO_ALLOC NB_SDCCH_DROP_EST_PHAS_BSS_PB NB_SDCCH_DROP_EST_PHAS_RLF NB_INC_SDCCH_HO_ALLOC NB_IMM_ASS_ALLOC NB_IMM_ASS_EXEC_FAIL_RADIO AV_NB_NOT_AVAIL_TRX_TS AV_NB_AVAIL_CCCH AV_NB_TCH_QUEUED NB_CELL_PAGING_CMD NB_CELL_IMM_ASS_CMD NB_CELL_CHAN_REQD NB_CELL_IMM_ASS_REJ NB_INC_EXT_TCH_HO_PREP_FAIL_CONG_R_ABI S NB_INC_EXT_TCH_HO_PREP_FAIL_NO_TTCH
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 2 2 2 4 4 4 4 2 2
Edition: 13 Released
Page 581
126 130 134 138 142 146 150 154 158 162 166 168 172 176 180 184 186 188 190 192
MC586a MC586b MC586c MC142e MC142f MC144e MC144f MC850 MC151 MC153 MC555 MC196 MC197 MC170 MC461 MC921a MC921b MC921c MC921d MC921e
Evolium NB_TCH_HO_ATPT_10_TooLowLevUpInZone NB_TCH_HO_ATPT_11_TooLowLevDownInZone NB_TCH_HO_ATPT_13_TooHighLevUpDownOutZo ne NB_OUT_IDR_SUCC NB_OUT_EDR_SUCC NB_OUT_IDR_REQ NB_OUT_EDR_REQ NB_MULTIBAND_MS_ACCESS_EXCEPT_LU_CELL NB_INC_IDR_SUCC (29) NB_INC_IDR_REQ NB_INC_IDR_PREP_FAIL_CONG_R_ABIS NB_SMS_PP_CON_SUCC NB_SMS_PP_CON_FAIL NB_CALL_TFO NB_TCH_HO_ATPT_29_TFO NB_TCH_NOR_ASS_HO_REQ_ABLE_TO_PREEMP T NB_PREEMPT_CAP_ALLOC_SUCC NB_PREEMPTED_CALLS NB_PREEMPT_CAP_OUT_DR_ALLOC_SUCC NB_TCH_NOR_ASS_HO_SUCC_PREEMPTABLE
4 4 4 4 4 4 4 4 4 4 2 4 4 4 4 2 2 2 2 2 216
Offset Short
Entity Selector
MC607 MC812 MC612a MC612b MC612c MC612d MC541 MC81 MC642 MC643 MC645a MC646
Name
Block
NB_SDCCH_HO_20_HighLevNeigCellForcDR NB_TCH_NOR_ASS_PREP_FAIL_CONG_R_ABIS NB_TCH_NOR_ASS_PREP_FAIL_NO_QUEUE NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_FULL NB_TCH_NOR_ASS_PREP_FAIL_T11_EXP NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_REJ NB_INC_EXT_TCH_HO_PREP_FAIL_R_ABIS NB_INC_EXT_SDCCH_HO_PREP_FAIL_CONG NB_INC_EXT_HO_SUCC NB_INC_EXT_HO_EXEC_FAIL_MS_ACCESS NB_OUT_EXT_REAL_HO_REQ NB_OUT_EXT_HO_SUCC
Length
4 4 4 4 4 4 2 2 4 2 4 4
Edition: 13 Released
Page 582
42 44 46 50 52 54 58 60 64 68 70 72 76 78 80 84 86 88 92 96 100 104 108 112 116 120 124 128 132 136 140 144 148 152
MC647 MC648 MC650 MC551 MC91 MC652 MC653 MC655a MC656 MC657 MC658 MC660 MC561 MC101 MC662 MC663 MC667 MC670 MC671 MC672 MC673 MC674 MC675 MC676 MC677 MC678 MC679 MC706 MC785a MC785d MC785e MC785f MC820 MC320a
Evolium NB_OUT_EXT_HO_EXEC_FAIL_REV NB_OUT_EXT_HO_EXEC_FAIL_NO_REV NB_OUT_EXT_HO_ATPT NB_INC_INT_TCH_HO_PREP_FAIL_CONG_R_ABI S NB_INC_INT_SDCCH_HO_PREP_FAIL_CONG NB_INC_INT_HO_SUCC NB_INC_INT_HO_EXEC_FAIL_MS_ACCESS NB_OUT_INT_HO_REQ NB_OUT_INT_HO_SUCC NB_OUT_INT_HO_EXEC_FAIL_REV NB_OUT_INT_HO_EXEC_FAIL_NO_REV NB_OUT_INT_HO_ATPT NB_INTRA_TCH_HO_PREP_FAIL_CONG_R_ABIS NB_INTRA_SDCCH_HO_PREP_FAIL_CONG NB_INTRA_HO_SUCC NB_INTRA_HO_EXEC_FAIL_NO_REV NB_INTRA_HO_EXEC_FAIL_REV NB_HO_2_TooLowQualUp NB_HO_3_TooLowLevUp NB_HO_4_TooLowQualDown NB_HO_5_TooLowLevDown NB_HO_6_TooLongDistance NB_HO_MSC_TRIG NB_HO_15_TooHighLevInterfUp NB_HO_16_TooHighLevInterfDown NB_HO_12_TooLowPowBudg NB_HO_21_HighLevNeigCellPrefBand NB_EGSM_MS_ACCESS_EXCEPT_LU NB_HO_7_ConsBadSACCHmicroCell NB_HO_17_TooLowLevUpMicroCell NB_HO_18_TooLowLevDownMicroCell NB_HO_14_HighLevNeigLowCellSlowMS NB_INC_EXT_HO_REQ AV_NB_IDLE_TCH_INTERF_BAND1
2 2 4 2 2 4 2 4 4 2 2 4 2 2 4 2 2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 2
Edition: 13 Released
Page 583
154 156 158 160 162 166 168 170 172 174 178 182 184 186 190 194 196 200 204 208 212
MC320b MC320c MC320d MC320e MC821 MC250 MC26 MC28a MC29a MC830 MC831 MC34 MC31 MC870 MC871 MC803 MC1040 MC1044 MC1050 MC161 MC162
Evolium AV_NB_IDLE_TCH_INTERF_BAND2 AV_NB_IDLE_TCH_INTERF_BAND3 AV_NB_IDLE_TCH_INTERF_BAND4 AV_NB_IDLE_TCH_INTERF_BAND5 NB_INC_EXT_HO_ATPT AV_NB_AVAIL_TCH AV_NB_AVAIL_SDCCH AV_NB_BUSY_CS_TS NB_MAX_SIMUL_BUSY_CS_TS NB_INC_INT_HO_REQ NB_INC_INT_HO_ATPT TIME_ALL_AVAIL_TRX_TS_BUSY NB_MAX_SIMUL_BUSY_SDCCH NB_INTRA_HO_REQ NB_INTRA_HO_ATPT TIME_SDCCH_CONGESTION NB_HO_ATPT_23_TrafHandover NB_HO_ATPT_24_gencapture NB_HO_22_TooShortDistance NB_DTAP_NOR_ASS_SUCC NB_TCH_DROP_DTAP_EST_PHAS
2 2 2 2 4 2 2 2 2 4 4 2 2 4 4 2 4 4 4 4 4
Offset Short
Entity Selector
MC448a MC448b MC449 MC701a MC701b MC701c MC701d MC701e MC702a MC702b MC702c
Name
Block
188
NB_TCH_HO_ATPT_26_BadQualHR NB_TCH_HO_ATPT_27_GoodQualFR NB_TCH_HO_ATPT_28_FastTraffic NB_TCH_FR_REQ NB_TCH_DR_REQ NB_TCH_DR_EFR_REQ NB_TCH_AMR_REQ NB_TCH_DATA_REQ NB_TCH_NOR_FR_ALLOC NB_TCH_NOR_HR_ALLOC NB_TCH_NOR_EFR_ALLOC
Length
4 4 4 4 4 4 4 4 4 4 4
Edition: 13 Released
Page 584
44 48 52 56 60 64 68 72 76 80 84 88 92 96 98 100 102 104 106 110 114 118 122 126 130 134 138 142 144 146 148 150 152 154
MC704a MC704b MC705 MC901 MC902 MC903 MC140a MC140b MC460a MC922a MC922b MC922c MC922d MC800 MC801a MC801b MC802a MC802b MC804a MC804b MC805a MC805b MC923a MC923b MC923c MC923d MC02i MC462a MC462b MC462c MC463a MC463b MC463c MC922e
Evolium NB_TCH_NOR_AMR_FR_ALLOC NB_TCH_NOR_AMR_HR_ALLOC NB_TCH_NOR_DATA_ALLOC NB_Suspend_req Nb_Suspend_fail Nb_Suspend_succ NB_TCH_NOR_ASS_REQ NB_TCH_NOR_ASS_ATPT NB_TCH_EMERGENCY_HO_PRESERVATION NB_INC_EXT_3G_2G_HO_REQ NB_INC_EXT_3G_2G_HO_SUCC NB_INC_EXT_3G_2G_HO_EXEC_FAIL_MS_ACC NB_INC_EXT_3G_2G_HO_ATPT AV_NB_AVAIL_DYN_TS AV_NB_BUSY_DYN_TCH MAX_NB_BUSY_DYN_TCH AV_NB_BUSY_DYN_SDCCH MAX_NB_BUSY_DYN_SDCCH NB_UL_SINGLE_BLOCK_SIG_RACH NB_UL_ONE_PHASE_SIG_RACH NB_CHANNEL_ASSIGN_DL_AGCH NB_CHANNEL_ASSIGN_DL_PCH NB_LCS_REQ NB_LCS_SUCC NB_LCS_FAIL_LB NB_LCS_ABORT NB_IMM_ASS_SUCC_MO_LCS NB_OUT_INTER_PLMN_TCH_HO_REQ NB_OUT_INTER_PLMN_TCH_HO_ATPT NB_OUT_INTER_PLMN_TCH_HO_SUCC NB_INC_INTER_PLMN_TCH_HO_REQ NB_INC_INTER_PLMN_TCH_HO_ATPT NB_INC_INTER_PLMN_TCH_HO_SUCC NB_INC_EXT_TCH_3G_2G_HO_EMERGENCY_RE Q BSC Counters Catalogue - B9 3BK 11203 0102 DSZZA
4 4 4 4 4 4 4 4 4 4 4 4 4 2 2 2 2 2 4 4 4 4 4 4 4 4 4 2 2 2 2 2 2 2
Edition: 13 Released
Page 585
156 158 160 162 164 166 168 170 172 174 176 178 180 182 184 186
MC922f MC922g MC922h MC480 MC481 MC924a MC924b MC924c MC924d MC924e MC924f MC924g MC924h MC924i MC924j MC924k
Evolium NB_INC_EXT_TCH_3G_2G_HO_REQ NB_INC_EXT_TCH_3G_2G_HO_PREP_FAIL_3GCO NG TIME_3G_HOReject_HL NB_TCH_HO_REQ_30_ReturnCSZone NB_TCH_HO_ATPT_30_ReturnCSZone TIME_SPDCH_LIMIT_HIGH_LOAD NB_OUT_2G_3G_HO_REQ NB_OUT_2G_3G_HO_SUCC NB_OUT_2G_3G_HO_ATPT NB_OUT_2G_3G_HO_EXEC_FAIL_NO_REV NB_OUT_2G_3G_HO_EXEC_FAIL_REV NB_OUT_2G_3G_HO_PREP_FAIL NB_2G_3G_HO_8 NB_2G_3G_HO_9 NB_2G_3G_HO_10 NB_2G_3G_HO_11
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Offset Short
Entity Selector
MC621 MC703 MC710 MC711 MC712 MC713 MC714 MC717a MC717b MC718 MC736 MC739 MC746b MC370a MC370b MC380a
Name
Block
93
NB_TCH_DROP_OUT_HO_EXEC_TRX NB_TCH_NOR_ASS_ALLOC_TRX NB_TCH_OUT_HO_REQ_TRX NB_TCH_OUT_HO_PREP_FAIL_CONG_TRX NB_TCH_OUT_HO_SUCC_TRX NB_TCH_OUT_HO_FAIL_REV_TRX NB_TCH_OUT_HO_FAIL_NO_REV_TRX NB_INC_IDR_SUCC_TRX NB_INC_TCH_HO_SUCC_TRX NB_TCH_NOR_ASS_SUCC_TRX NB_TCH_DROP_EST_PHAS_RLF_TRX NB_TCH_DROP_EST_PHAS_REM_TRANS_FAIL_T RX NB_TCH_NOR_ASS_EXEC_FAIL_RADIO_TRX NB_TRX_FR_ALLOC NB_TRX_HR_ALLOC TIME_TRX_FR_BUSY
Length
2 2 2 2 2 2 2 2 2 2 2 2 2 6 6 6
Edition: 13 Released
Page 586
45 51 57 63 69 75 81 87
Evolium TIME_TRX_HR_BUSY TIME_TRX_GSM_FR_BUSY TIME_TRX_GSM_HR_BUSY TIME_TRX_DCS_FR_BUSY TIME_TRX_DCS_HR_BUSY TIME_TRX_TCH_BUSY_BY_MULTIBAND_MS NB_TIMES_SDCCH_BUSY (110) TIME_TRX_SDCCH_BUSY
6 6 6 6 6 6 6 6 2
Offset Short
MN1.1 MC350 MC351
Entity Selector
Name
Block
12
Length
4 4 4
Offset Short
MC19 MC35 MC36
Entity Selector
Name
Block
12
Length
4 4 4
Type
180
Offset Short
C400 C401 C402
Name
Block
12
Length
4 4 4
NB_IMM_ASS_SUCC_MT NB_IMM_ASS_SUCC_MO NB_IMM_ASS_SUCC_MO_LOC_UPD NB_IMM_ASS_SUCC_MO_SMS NB_IMM_ASS_SUCC_MO_SUP_SERV NB_IMM_ASS_SUCC_MO_FOLLOW_ON NB_IMM_ASS_SUCC_MO_CM_REEST NB_IMM_ASS_SUCC_MO_L3INFO_UNKNOW NB_IMM_ASS_SUCC_MO_IMSI_DETACH NB_IMM_ASS_SUCC_MO_CALL_EST NB_IMM_ASS_SUCC_MO_LCS BSC Counters Catalogue - B9
Edition: 13 Released
Page 587
C03 C04 C07 C10 C100 C101 C102 C103 C107 C115 C137 C138 C13a C13b C141 C142a C142b C142c C142d C143a C143b C143c C143d C143e C143f C143g C143h C144a C144b C144c C144d C145a C145b C145c C145d C147 C148 C149 C14a C14c
Evolium
NB_INTRA_SDCCH_HO_EXEC_FAIL_NO_REV NB_INTRA_SDCCH_HO_EXEC_FAIL_REV NB_SDCCH_HO_MSC_TRIG NB_SDCCH_DROP_EST_PHAS_BSS_PB NB_SDCCH_DROP_EST_PHAS_RLF NB_TCH_NOR_ASS_QUEUED NB_INC_EXT_TCH_HO_QUEUED AV_NB_TCH_QUEUED NB_OUT_FORCED_IDR_SUCC NB_OUT_FORCED_EDR_SUCC NB_OUT_NOR_IDR_SUCC NB_OUT_NOR_EDR_SUCC NB_OUT_FORCED_IDR_EXEC_FAIL_REV NB_OUT_FORCED_IDR_EXEC_FAIL_NO_REV NB_OUT_FORCED_EDR_EXEC_FAIL_REV NB_OUT_FORCED_EDR_EXEC_FAIL_NO_REV NB_OUT_NOR_IDR_EXEC_FAIL_REV NB_OUT_NOR_IDR_EXEC_FAIL_NO_REV NB_OUT_NOR_EDR_EXEC_FAIL_REV NB_OUT_NOR_EDR_EXEC_FAIL_NO_REV NB_OUT_FORCED_IDR_REQ NB_OUT_FORCED_EDR_REQ NB_OUT_NOR_IDR_REQ NB_OUT_NOR_EDR_REQ NB_OUT_FORCED_IDR_ATPT NB_OUT_FORCED_EDR_ATPT NB_OUT_NOR_IDR_ATPT NB_OUT_NOR_EDR_ATPT NB_INC_SDCCH_HO_ALLOC NB_IMM_ASS_ALLOC NB_IMM_ASS_EXEC_FAIL_RADIO NB_TCH_DROP_HO_PREP_EXEC_FAIL_BSS_PB NB_TCH_DROP_EST_PHAS_BSS_PB BSC Counters Catalogue - B9
Edition: 13 Released
C151 C152 C153 C153a C153b C154 C15a C15b C161a C161b C162a C162b C162c C170 C171 C180a C180b C180c C180d C180e C181a C181b C181c C181d C181e C181f C181g C181h C181i C181j C181k C181l C182 C190 C191 C192 C193 C194a C194b C194c
NB_INC_IDR_SUCC (29) NB_INC_IDR_EXEC_FAIL_MS_ACCESS NB_INC_IDR_REQ NB_N7_CON_EST_FAIL_DUE_NSS NB_N7_CON_EST_FAIL_DUE_BSS NB_INC_IDR_ATPT NB_INC_IDR_ALLOC NB_INC_TCH_HO_ALLOC NB_DTAP_MO_NOR_ASS_SUCC NB_DTAP_MT_NOR_ASS_SUCC NB_TCH_DROP_DTAP_EST_PHAS_RLF NB_TCH_DROP_DTAP_EST_PHAS_BSS_PB
Evolium
NB_TCH_DROP_DTAP_EST_PHAS_REM_TRANS_FAIL NB_CALL_TFO NB_TFO_CODEC_REQ NB_N7_CLEAR_REQ_RadioIntMessFail NB_N7_CLEAR_REQ_O&Minterv NB_N7_CLEAR_REQ_EquipFail NB_N7_CLEAR_REQ_RadioIntFail NB_N7_CLEAR_REQ_NoRadioResAvail NB_N7_ASS_FAIL_RadioIntMessFail NB_N7_ASS_FAIL_O&Minterv NB_N7_ASS_FAIL_EquipFail NB_N7_ASS_FAIL_NoRadioResAvail NB_N7_ASS_FAIL_ReqTerResUnav/Alloc NB_N7_ASS_FAIL_ReqTrans/RateUnav NB_N7_ASS_FAIL_RadioIntFailRevOldChan NB_N7_ASS_FAIL_RadioIntFail NB_N7_ASS_FAIL_CipherAlgoNotSupp NB_N7_ASS_FAIL_BSSnotEquip NB_N7_ASS_FAIL_ProtocolError NB_N7_ASS_FAIL_ReqSpeechVersUnav NB_N7_CLEAR_REQ_EST_PHAS NB_SMS_PP_CON_MO_SDCCH NB_SMS_PP_CON_MT_SDCCH NB_SMS_PP_CON_MO_SACCH NB_SMS_PP_CON_MT_SACCH NB_SMS_PP_CON_REJ_RadioIntFail NB_SMS_PP_CON_REJ_BSSnotEquip NB_SMS_PP_CON_REJ_ProtocolError BSC Counters Catalogue - B9
Edition: 13 Released
C195 C220 C221 C230 C231 C24 C250 C251 C252 C253 C254 C255 C256 C257 C258 C26 C27 C270 C271 C28a C29a C30 C31 C310 C311 C320a C320b C320c C320d C320e C330 C331 C34 C360 C361 C370a C370b C380a C380b C381a
NB_SMS_PP_CON_REL_LAPDM_ERROR NB_INC_EXT_TCH_HO_REQ NB_INC_EXT_TCH_HO_ATPT NB_INC_INT_TCH_HO_REQ NB_INC_INT_TCH_HO_ATPT AV_NB_NOT_AVAIL_TRX_TS AV_NB_AVAIL_TCH NB_N7_UNIT_DATA_SENT NB_N7_UNIT_DATA_REC NB_N7_CON_REQ_SENT NB_N7_CON_REQ_REC NB_N7_CON_CONF_SENT NB_N7_CON_CONF_REC NB_N7_CON_REF_SENT NB_N7_CON_REF_REC AV_NB_AVAIL_SDCCH AV_NB_AVAIL_CCCH NB_INTRA_TCH_HO_REQ NB_INTRA_TCH_HO_ATPT AV_NB_BUSY_CS_TS NB_MAX_SIMUL_BUSY_CS_TS AV_NB_BUSY_SDCCH NB_MAX_SIMUL_BUSY_SDCCH NB_INC_EXT_SDCCH_HO_REQ NB_INC_EXT_SDCCH_HO_ATPT AV_NB_IDLE_TCH_INTERF_BAND1 AV_NB_IDLE_TCH_INTERF_BAND2 AV_NB_IDLE_TCH_INTERF_BAND3 AV_NB_IDLE_TCH_INTERF_BAND4 AV_NB_IDLE_TCH_INTERF_BAND5 NB_INC_INT_SDCCH_HO_REQ NB_INC_INT_SDCCH_HO_ATPT TIME_ALL_AVAIL_TRX_TS_BUSY NB_INTRA_SDCCH_HO_REQ NB_INTRA_SDCCH_HO_ATPT NB_TCH_FR_ALLOC NB_TCH_HR_ALLOC TIME_FR_TCH_BUSY TIME_HR_TCH_BUSY TIME_FR_TCH_BUSY_BY_MULTIBAND_MS
Evolium
Edition: 13 Released
C381b C39 C40 C400 C401 C402 C403a C403b C404a C404b C411 C412 C413 C41b C42 C420a C420b C421a C421b C43 C440 C442 C443 C444 C445 C446 C447 C448 C449 C450 C454 C45a C46 C460 C461 C47 C470 C471 C472 C473
TIME_HR_TCH_BUSY_BY_MULTIBAND_MS NB_TIMES_SDCCH_BUSY TIME_SDCCH_BUSY NB_ADJ_BSC_INC_HO_REQ NB_ADJ_BSC_INC_HO_ATPT NB_ADJ_BSC_INC_HO_SUCC NB_INC_EXT_TCH_HO_NEW_BAND_ATPT NB_INC_EXT_TCH_HO_NEW_BAND_SUCC NB_OUT_EXT_TCH_HO_NEW_BAND_ATPT NB_OUT_EXT_TCH_HO_NEW_BAND_SUCC NB_OUT_INT_TCH_HO_IDR_IN_ZONE_REQ
Evolium
NB_OUT_INT_TCH_HO_IDR_IN_ZONE_EXEC_FAIL NB_TCH_NOR_ASS_INNER_ZONE_ALLOC NB_INC_EXT_TCH_HO_PREP_FAIL_NO_TTCH NB_INC_EXT_TCH_HO_SUCC NB_INC_INT_TCH_HO_NEW_BAND_ATPT NB_INC_INT_TCH_HO_NEW_BAND_SUCC NB_OUT_INT_TCH_HO_NEW_BAND_ATPT NB_OUT_INT_TCH_HO_NEW_BAND_SUCC NB_INC_EXT_TCH_HO_EXEC_FAIL_MS_ACCESS NB_TCH_HO_ATPT_23_TrafHandover NB_TIMES_TRAF_DETECTED_HIGH NB_TIMES_TRAF_DETECTED_LOW NB_TCH_HO_ATPT_24_GenCaptureHandover NB_SDCCH_HO_ATPT_23_TrafHandover NB_SDCCH_HO_ATPT_24_GenCaptureHandover NB_TCH_HO_ATPT_26_BadQualHR NB_TCH_HO_ATPT_27_GoodQualFR NB_TCH_HO_ATPT_28_FastTraffic NB_TCH_HO_ATPT_22_TooShortDistance NB_SDCCH_HO_ATPT_22_TooShortDistance NB_OUT_EXT_TCH_REAL_HO_REQ NB_OUT_EXT_TCH_HO_SUCC NB_TCH_HO_ALLOC_EMERGENCY_PRES NB_TCH_HO_ATPT_29_TFO NB_OUT_EXT_TCH_HO_EXEC_FAIL_REV NB_TCH_HO_ATPT_2_TooLowQualUp NB_TCH_HO_ATPT_3_TooLowLevUp NB_TCH_HO_ATPT_4_TooLowQualDown NB_TCH_HO_ATPT_5_TooLowLevDown BSC Counters Catalogue - B9
Edition: 13 Released
C474 C476 C477 C478 C479 C48 C50 C510 C511 C512 C513 C514 C516 C517 C518 C519 C52 C53 C541 C541a C551 C555 C55a C56 C561 C57 C58 C585a C585d C585e C585f C586a C586b C586c C60 C605a C605d C605e C605f C607
NB_TCH_HO_ATPT_6_TooLongDistance NB_TCH_HO_ATPT_15_TooHighLevInterfUp
Evolium
NB_TCH_HO_ATPT_16_TooHighLevInterfDown NB_TCH_HO_ATPT_12_TooLowPowBudg NB_TCH_HO_ATPT_21_HighLevNeigCellPrefBand NB_OUT_EXT_TCH_HO_EXEC_FAIL_NO_REV NB_OUT_EXT_TCH_HO_ATPT NB_SDCCH_HO_ATPT_2_TooLowQualUp NB_SDCCH_HO_ATPT_3_TooLowLevUp NB_SDCCH_HO_ATPT_4_TooLowQualDown NB_SDCCH_HO_ATPT_5_TooLowLevDown NB_SDCCH_HO_ATPT_6_TooLongDistance NB_SDCCH_HO_ATPT_15_TooHighLevInterfUp NB_SDCCH_HO_ATPT_16_TooHighLevInterfDown NB_SDCCH_HO_ATPT_12_TooLowPowBudg NB_SDCCH_HO_ATPT_21_HighLevNeigCellPrefBand NB_INC_INT_TCH_HO_SUCC NB_INC_INT_TCH_HO_EXEC_FAIL_MS_ACCESS NB_INC_EXT_TCH_HO_PREP_FAIL_R_ABIS NB_INC_EXT_TCH_HO_PREP_FAIL_CONG_R_ABIS NB_INC_INT_TCH_HO_PREP_FAIL_CONG_R_ABIS NB_INC_IDR_PREP_FAIL_CONG_R_ABIS NB_OUT_INT_TCH_HO_REQ NB_OUT_INT_TCH_HO_SUCC NB_INTRA_TCH_HO_PREP_FAIL_CONG_R_ABIS NB_OUT_INT_TCH_HO_EXEC_FAIL_REV NB_OUT_INT_TCH_HO_EXEC_FAIL_NO_REV NB_TCH_HO_ATPT_7_ConsBadSACCHmicroCell NB_TCH_HO_ATPT_17_TooLowLevUpMicroCell NB_TCH_HO_ATPT_18_TooLowLevDownMicroCell NB_TCH_HO_ATPT_14_HighLevNeigLowCellSlowMS NB_TCH_HO_ATPT_10_TooLowLevUpInZone NB_TCH_HO_ATPT_11_TooLowLevDownInZone NB_TCH_HO_ATPT_13_TooHighLevUpDownOutZone NB_OUT_INT_TCH_HO_ATPT NB_SDCCH_HO_ATPT_7_ConsBadSACCHmicroCell NB_SDCCH_HO_ATPT_17_TooLowLevUpMicroCell NB_SDCCH_HO_ATPT_18_TooLowLevDownMicroCell NB_SDCCH_HO_ATPT_14_HighLevNeigLowCellSlowMS NB_SDCCH_HO_ATPT_20_HighLevNeigCellForcDR BSC Counters Catalogue - B9
Edition: 13 Released
C612a C612b C612c C612d C62 C621 C63 C67 C701a C701b C701c C701d C701e C702a C702b C702c C703 C704a C704b C705 C706 C710 C711 C712 C713 C714 C717a C717b C718 C720 C721 C722 C723 C724 C725 C727 C728 C730 C731 C733
Evolium NB_TCH_NOR_ASS_PREP_FAIL_NO_QUEUE NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_FULL NB_TCH_NOR_ASS_PREP_FAIL_T11_EXP NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_REJ NB_INTRA_TCH_HO_SUCC NB_TCH_DROP_OUT_HO_EXEC_TRX NB_INTRA_TCH_HO_EXEC_FAIL_NO_REV NB_INTRA_TCH_HO_EXEC_FAIL_REV NB_TCH_FR_REQ NB_TCH_DR_REQ NB_TCH_DR_EFR_REQ NB_TCH_AMR_REQ NB_TCH_DATA_REQ NB_TCH_NOR_FR_ALLOC NB_TCH_NOR_HR_ALLOC NB_TCH_NOR_EFR_ALLOC NB_TCH_NOR_ASS_ALLOC_TRX NB_TCH_NOR_AMR_FR_ALLOC NB_TCH_NOR_AMR_HR_ALLOC NB_TCH_NOR_DATA_ALLOC NB_EGSM_MS_ACCESS_EXCEPT_LU NB_TCH_OUT_HO_REQ_TRX NB_TCH_OUT_HO_PREP_FAIL_CONG_TRX NB_TCH_OUT_HO_SUCC_TRX NB_TCH_OUT_HO_FAIL_REV_TRX NB_TCH_OUT_HO_FAIL_NO_REV_TRX NB_INC_IDR_SUCC_TRX NB_INC_TCH_HO_SUCC_TRX NB_TCH_NOR_ASS_SUCC_TRX NB_ADJ_SCELL_OUT_TCH_HO_ATPT NB_ADJ_SCELL_OUT_TCH_HO_SUCC NB_ADJ_SCELL_OUT_TCH_HO_EXEC_FAIL_REV NB_ADJ_SCELL_OUT_TCH_HO_EXEC_FAIL_NO_REV NB_ADJ_SCELL_OUT_TCH_HO_EMERGENCY_ATPT NB_ADJ_SCELL_OUT_TCH_HO_BETTERCELL_ATPT NB_ADJ_SCELL_OUT_TCH_HO_TRAFFIC_ATPT NB_ADJ_SCELL_OUT_ FORCED_DR_ATPT NB_ADJ_TCELL_INC_TCH_HO_ATPT NB_ADJ_TCELL_INC_TCH_HO_SUCC NB_ADJ_TCELL_INC_TCH_HO_EXEC_FAIL_MS_ACC BSC Counters Catalogue - B9
Edition: 13 Released
C734 C735 C736 C737 C738 C739 C746b C75 C750 C751 C753 C803 C81 C812 C82 C83 C850 C85a C86 C87 C88 C8a C8b C8c C8d C90 C901 C902 C903 C91 C92 C93 C95a C96 C97 C98 CB601 CB602 CB603 CB604
Evolium NB_ADJ_TCELL_INC_TCH_HO_EMERGENCY_ATPT NB_ADJ_TCELL_INC_TCH_HO_BETTERCELL_ATPT NB_TCH_DROP_EST_PHAS_RLF_TRX NB_ADJ_TCELL_INC_TCH_HO_TRAFFIC_ATPT NB_ADJ_TCELL_INC_FORCED_DR_ATPT NB_TCH_DROP_EST_PHAS_REM_TRANS_FAIL_TRX NB_TCH_NOR_ASS_EXEC_FAIL_RADIO_TRX NB_TCH_HO_MSC_TRIG TIME_A_CHANNEL_BUSY NB_A_CHANNEL_ALLOC NB_ADJ_TCELL_INC_TCH_HO_OTHER_ATPT TIME_SDCCH_CONGESTION NB_INC_EXT_SDCCH_HO_PREP_FAIL_CONG NB_TCH_NOR_ASS_PREP_FAIL_CONG_R_ABIS NB_INC_EXT_SDCCH_HO_SUCC NB_INC_EXT_SDCCH_HO_EXEC_FAIL_MS_ACCESS NB_MULTIBAND_MS_ACCESS_EXCEPT_LU_CELL NB_OUT_EXT_SDCCH_REAL_HO_REQ NB_OUT_EXT_SDCCH_HO_SUCC NB_OUT_EXT_SDCCH_HO_EXEC_FAIL_REV NB_OUT_EXT_SDCCH_HO_EXEC_FAIL_NO_REV NB_PAGING_CMD NB_IMM_ASS_CMD NB_CHAN_REQD NB_IMM_ASS_REJ NB_OUT_EXT_SDCCH_HO_ATPT NB_Suspend_req Nb_Suspend_fail Nb_Suspend_succ NB_INC_INT_SDCCH_HO_PREP_FAIL_CONG NB_INC_INT_SDCCH_HO_SUCC NB_INC_INT_SDCCH_HO_EXEC_FAIL_MS_ACCESS NB_OUT_INT_SDCCH_HO_REQ NB_OUT_INT_SDCCH_HO_SUCC NB_OUT_INT_SDCCH_HO_EXEC_FAIL_REV NB_OUT_INT_SDCCH_HO_EXEC_FAIL_NO_REV NB_SMSCB_WRITE_REPL_SUCC NB_SMSCB_KILL_MESS_SUCC NB_SMS_CB_FAIL_IND NB_SMS_CB_WRITE_REP_KILL_MESS_REJ BSC Counters Catalogue - B9
Edition: 13 Released
E01 E02 HO1 HO10100 HO1047 HO1048 HO1049 HO1098 HO1099 HO11 HO1100 HO1101 HO1102 HO1103 HO111 HO11100 HO1147 HO1148 HO1149 HO1198 HO1199 HO12 HO12100 HO1247 HO1248 HO1249 HO1298 HO1299 HO13100 HO1347 HO1348 HO1349 HO1398 HO1399 HO14100 HO1447 HO1448 HO1449 HO147 HO148
EME_PWR_GSM EME_PWR_DCS SIGNALLING_TRAFFIC_IND RXLEV BSIC FREQ RXLEV BSIC FREQ HO_CAUSE RXLEV SCRAMBLING_CODE FDD_FREQ AV_ECNO SAMPLE_RATE RXLEV BSIC FREQ RXLEV BSIC FREQ SYNCHRONIZED RXLEV BSIC FREQ RXLEV BSIC FREQ RXLEV BSIC FREQ RXLEV BSIC FREQ RXLEV BSIC FREQ RXLEV BSIC FREQ
Evolium
33 33 12 14 12 12 12 14 14 12 14 14 14 14 14 14 12 12 12 14 14 12 14 12 12 12 14 14 14 12 12 12 14 14 14 12 12 12 12 12
Edition: 13 Released
Page 595
HO149 HO1498 HO1499 HO15100 HO1547 HO1548 HO1549 HO1598 HO1599 HO16100 HO1647 HO1648 HO1649 HO1698 HO1699 HO198 HO199 HO2 HO2100 HO2101 HO2102 HO2103 HO23 HO23a HO247 HO248 HO249 HO25 HO25a HO26 HO26a HO27 HO29 HO298 HO299 HO3 HO30 HO3100 HO3101 HO3102
RXLEV BSIC FREQ RXLEV BSIC FREQ RXLEV BSIC FREQ RXLEV BSIC FREQ RXLEV BSIC FREQ BSIC FREQ INTRA_INTER_CELL_IND RXLEV SCRAMBLING_CODE FDD_FREQ AV_ECNO A_LEV_HO A_LEV_MCHO BSIC FREQ RXLEV AV_RXLEV_UL_HO (12) AV_RXLEV_UL_MCHO (12) AV_RXLEV_DL_HO (12) AV_RXLEV_DL_MCHO (12) A_PBGT_HO AV_RXLEV_PBGT_HO (12) BSIC FREQ HO_REQUIRED_TIME_STAMP A_QUAL_HO RXLEV SCRAMBLING_CODE FDD_FREQ
Evolium
12 14 14 14 12 12 12 14 14 14 12 12 12 14 14 14 14 12 14 14 14 14 12 12 12 12 12 12 12 12 12 12 12 14 14 12 12 14 14 14
Edition: 13 Released
Page 596
HO3103 HO32 HO33 HO34 HO347 HO348 HO349 HO36 HO37 HO38 HO398 HO399 HO40 HO41 HO4100 HO4101 HO4102 HO4103 HO42 HO43 HO43a HO44 HO447 HO448 HO449 HO45 HO46 HO498 HO499 HO5 HO5100 HO5101 HO5102 HO5103 HO547 HO548 HO549 HO598 HO599 HO5a
AV_ECNO AV_RXQUAL_UL_HO (12) AV_RXQUAL_DL_HO (12) A_RANGE_HO BSIC FREQ RXLEV AV_RANGE_HO (12) MS_TXPWR BS_TXPWR BSIC FREQ SIGNALLING_TRAFFIC_IND INCOMING_HO_IND RXLEV SCRAMBLING_CODE FDD_FREQ AV_ECNO HO_REQUEST_TIME_STAMP NEW_CHANNEL_ID NEW_RTCH_TYPE INC_EXT_HO_SUCCESS_FAILURE_IND BSIC FREQ RXLEV SYNCHRONIZED SAMPLE_RATE BSIC FREQ OLD_CHANNEL_ID RXLEV SCRAMBLING_CODE FDD_FREQ AV_ECNO BSIC FREQ RXLEV BSIC FREQ OLD_RTCH_TYPE
Evolium
14 12 12 12 12 12 12 12 12 12 14 14 13 13 14 14 14 14 13 13 13 13 12 12 12 13 13 14 14 12 14 14 14 14 12 12 12 14 14 12
Edition: 13 Released
Page 597
HO6 HO60 HO61 HO6100 HO6101 HO6102 HO6103 HO62 HO63 HO64 HO647 HO648 HO649 HO64a HO65 HO68 HO698 HO699 HO6a HO7 HO7100 HO7101 HO7102 HO7103 HO74 HO747 HO748 HO749 HO75 HO76 HO798 HO799 HO8 HO80 HO80a HO8100 HO8101 HO8102 HO8103 HO82
NEW_CHANNEL_ID SIGNALLING_TRAFFIC_IND OUTGOING_HO_IND RXLEV SCRAMBLING_CODE FDD_FREQ AV_ECNO HO_REQUIRED_TIME_STAMP HO_REQUIRED_NB OLD_CHANNEL_ID BSIC FREQ RXLEV OLD_RTCH_TYPE OUT_EXT_HO_SUCCESS_FAILURE_IND HO_CAUSE BSIC FREQ NEW_RTCH_TYPE INT_HO_SUCCESS_FAILURE_IND RXLEV SCRAMBLING_CODE FDD_FREQ AV_ECNO SAMPLE_RATE BSIC FREQ RXLEV MS_SPEED MS_SPEED BSIC FREQ HO_DURATION A_LEV_HO A_LEV_MCHO RXLEV SCRAMBLING_CODE FDD_FREQ AV_ECNO AV_RXLEV_UL_HO (12)
Evolium
Edition: 13 Released
HO82a HO83 HO83a HO84 HO847 HO848 HO849 HO86 HO87 HO89 HO898 HO899 HO90 HO91 HO9100 HO93 HO94 HO947 HO948 HO949 HO95 HO998 HO999 L1.1 L1.12 L1.15 L1.16 L1.17 L1.18 L1.2 L1.5 L1.6 MC01 MC02 MC02a MC02b MC02c MC02d MC02e MC02f
AV_RXLEV_UL_MCHO (12) AV_RXLEV_DL_HO (12) AV_RXLEV_DL_MCHO (12) A_PBGT_HO BSIC FREQ RXLEV AV_RXLEV_PBGT_HO (12) A_QUAL_HO AV_RXQUAL_UL_HO (12) BSIC FREQ AV_RXQUAL_DL_HO (12) A_RANGE_HO RXLEV AV_RANGE_HO (12) MS_TXPWR BSIC FREQ RXLEV BS_TXPWR BSIC FREQ NB_LAPD_INFO_FRAME_SENT NB_LAPD_CRC_ERROR NB_LAPD_INFO_FRAME_RESENT TIME_LAPD_UNAVAIL NB_LAPD_EST TIME_LAPD_CONG NB_LAPD_INFO_FRAME_REC NB_LAPD_RNR_SENT NB_LAPD_RNR_REC NB_IMM_ASS_SUCC_MT NB_IMM_ASS_SUCC_MO NB_IMM_ASS_SUCC_MO_LOC_UPD NB_IMM_ASS_SUCC_MO_SMS NB_IMM_ASS_SUCC_MO_SUP_SERV NB_IMM_ASS_SUCC_MO_FOLLOW_ON NB_IMM_ASS_SUCC_MO_CM_REEST
Evolium
14 14 14 14 12 12 12 14 14 14 14 14 14 14 14 14 14 12 12 12 14 14 14 7 7 7 7 7 7 7 7 7 110 110 110 110 110 110 110 110 3BK 11203 0102 DSZZA Page 599
Edition: 13 Released
MC02g MC02h MC02i MC03 MC04 MC07 MC10 MC101 MC1040 MC1044 MC1050 MC137 MC138 MC13a MC13b MC140a MC140b MC141 MC142e MC142f MC144e MC144f MC147 MC148 MC149 MC14a MC14c MC151 MC153 MC15a MC15b MC161 MC162 MC170 MC19 MC196 MC197 MC24 MC250 MC26
NB_IMM_ASS_SUCC_MO_IMSI_DETACH NB_IMM_ASS_SUCC_MO_CALL_EST NB_IMM_ASS_SUCC_MO_LCS NB_OUT_SDCCH_HO_SUCC NB_IMM_ASS_PREP_FAIL_CONG NB_SDCCH_DROP_OUT_HO NB_INC_SDCCH_HO_SUCC NB_INTRA_SDCCH_HO_PREP_FAIL_CONG NB_HO_ATPT_23_TrafHandover NB_HO_ATPT_24_gencapture NB_HO_22_TooShortDistance NB_SDCCH_DROP_EST_PHAS_BSS_PB NB_SDCCH_DROP_EST_PHAS_RLF NB_TCH_NOR_ASS_QUEUED NB_INC_EXT_TCH_HO_QUEUED NB_TCH_NOR_ASS_REQ NB_TCH_NOR_ASS_ATPT AV_NB_TCH_QUEUED NB_OUT_IDR_SUCC NB_OUT_EDR_SUCC NB_OUT_IDR_REQ NB_OUT_EDR_REQ NB_INC_SDCCH_HO_ALLOC NB_IMM_ASS_ALLOC NB_IMM_ASS_EXEC_FAIL_RADIO
Evolium
110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 3BK 11203 0102 DSZZA Page 600
NB_TCH_DROP_HO_PREP_EXEC_FAIL_BSS_PB NB_TCH_DROP_EST_PHAS_BSS_PB NB_INC_IDR_SUCC (29) NB_INC_IDR_REQ NB_INC_IDR_ALLOC NB_INC_TCH_HO_ALLOC NB_DTAP_NOR_ASS_SUCC NB_TCH_DROP_DTAP_EST_PHAS NB_CALL_TFO NB_TCH_NOR_ASS_HO_PREP_FAIL_ACHAN_MIS (110) NB_SMS_PP_CON_SUCC NB_SMS_PP_CON_FAIL AV_NB_NOT_AVAIL_TRX_TS AV_NB_AVAIL_TCH AV_NB_AVAIL_SDCCH BSC Counters Catalogue - B9
Edition: 13 Released
MC27 MC28a MC29a MC31 MC320a MC320b MC320c MC320d MC320e MC34 MC35 MC350 MC351 MC36 MC370a MC370b MC380a MC380b MC380c MC380d MC380e MC380f MC381 MC390 MC400 MC41b MC448a MC448b MC449 MC460a MC461 MC462a MC462b MC462c MC463a MC463b MC463c MC480 MC481 MC541
AV_NB_AVAIL_CCCH AV_NB_BUSY_CS_TS NB_MAX_SIMUL_BUSY_CS_TS NB_MAX_SIMUL_BUSY_SDCCH AV_NB_IDLE_TCH_INTERF_BAND1 AV_NB_IDLE_TCH_INTERF_BAND2 AV_NB_IDLE_TCH_INTERF_BAND3 AV_NB_IDLE_TCH_INTERF_BAND4 AV_NB_IDLE_TCH_INTERF_BAND5 TIME_ALL_AVAIL_TRX_TS_BUSY
Evolium
110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 3BK 11203 0102 DSZZA Page 601
AV_NB_A_TRAF_CHAN_BLOCK_OUT_OF_SERV NB_N7_CON_REQ NB_N7_CON_CONF AV_NB_AVAIL_A_TRAF_CHAN NB_TRX_FR_ALLOC NB_TRX_HR_ALLOC TIME_TRX_FR_BUSY TIME_TRX_HR_BUSY TIME_TRX_GSM_FR_BUSY TIME_TRX_GSM_HR_BUSY TIME_TRX_DCS_FR_BUSY TIME_TRX_DCS_HR_BUSY TIME_TRX_TCH_BUSY_BY_MULTIBAND_MS NB_TIMES_SDCCH_BUSY (110) TIME_TRX_SDCCH_BUSY NB_INC_EXT_TCH_HO_PREP_FAIL_NO_TTCH NB_TCH_HO_ATPT_26_BadQualHR NB_TCH_HO_ATPT_27_GoodQualFR NB_TCH_HO_ATPT_28_FastTraffic NB_TCH_EMERGENCY_HO_PRESERVATION NB_TCH_HO_ATPT_29_TFO NB_OUT_INTER_PLMN_TCH_HO_REQ NB_OUT_INTER_PLMN_TCH_HO_ATPT NB_OUT_INTER_PLMN_TCH_HO_SUCC NB_INC_INTER_PLMN_TCH_HO_REQ NB_INC_INTER_PLMN_TCH_HO_ATPT NB_INC_INTER_PLMN_TCH_HO_SUCC NB_TCH_HO_REQ_30_ReturnCSZone NB_TCH_HO_ATPT_30_ReturnCSZone NB_INC_EXT_TCH_HO_PREP_FAIL_R_ABIS BSC Counters Catalogue - B9
Edition: 13 Released
MC541a MC551 MC555 MC561 MC586a MC586b MC586c MC607 MC612a MC612b MC612c MC612d MC621 MC642 MC643 MC645a MC646 MC647 MC648 MC650 MC652 MC653 MC655a MC656 MC657 MC658 MC660 MC662 MC663 MC667 MC670 MC671 MC672 MC673 MC674 MC675 MC676 MC677 MC678 MC679
Evolium NB_INC_EXT_TCH_HO_PREP_FAIL_CONG_R_ABIS NB_INC_INT_TCH_HO_PREP_FAIL_CONG_R_ABIS NB_INC_IDR_PREP_FAIL_CONG_R_ABIS NB_INTRA_TCH_HO_PREP_FAIL_CONG_R_ABIS NB_TCH_HO_ATPT_10_TooLowLevUpInZone NB_TCH_HO_ATPT_11_TooLowLevDownInZone NB_TCH_HO_ATPT_13_TooHighLevUpDownOutZone NB_SDCCH_HO_20_HighLevNeigCellForcDR NB_TCH_NOR_ASS_PREP_FAIL_NO_QUEUE NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_FULL NB_TCH_NOR_ASS_PREP_FAIL_T11_EXP NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_REJ NB_TCH_DROP_OUT_HO_EXEC_TRX NB_INC_EXT_HO_SUCC NB_INC_EXT_HO_EXEC_FAIL_MS_ACCESS NB_OUT_EXT_REAL_HO_REQ NB_OUT_EXT_HO_SUCC NB_OUT_EXT_HO_EXEC_FAIL_REV NB_OUT_EXT_HO_EXEC_FAIL_NO_REV NB_OUT_EXT_HO_ATPT NB_INC_INT_HO_SUCC NB_INC_INT_HO_EXEC_FAIL_MS_ACCESS NB_OUT_INT_HO_REQ NB_OUT_INT_HO_SUCC NB_OUT_INT_HO_EXEC_FAIL_REV NB_OUT_INT_HO_EXEC_FAIL_NO_REV NB_OUT_INT_HO_ATPT NB_INTRA_HO_SUCC NB_INTRA_HO_EXEC_FAIL_NO_REV NB_INTRA_HO_EXEC_FAIL_REV NB_HO_2_TooLowQualUp NB_HO_3_TooLowLevUp NB_HO_4_TooLowQualDown NB_HO_5_TooLowLevDown NB_HO_6_TooLongDistance NB_HO_MSC_TRIG NB_HO_15_TooHighLevInterfUp NB_HO_16_TooHighLevInterfDown NB_HO_12_TooLowPowBudg NB_HO_21_HighLevNeigCellPrefBand BSC Counters Catalogue - B9
110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 3BK 11203 0102 DSZZA Page 602
Edition: 13 Released
MC701a MC701b MC701c MC701d MC701e MC702a MC702b MC702c MC703 MC704a MC704b MC705 MC706 MC710 MC711 MC712 MC713 MC714 MC717a MC717b MC718 MC736 MC739 MC746b MC785a MC785d MC785e MC785f MC800 MC801a MC801b MC802a MC802b MC803 MC804a MC804b MC805a MC805b MC81 MC812
NB_TCH_FR_REQ NB_TCH_DR_REQ NB_TCH_DR_EFR_REQ NB_TCH_AMR_REQ NB_TCH_DATA_REQ NB_TCH_NOR_FR_ALLOC NB_TCH_NOR_HR_ALLOC NB_TCH_NOR_EFR_ALLOC NB_TCH_NOR_ASS_ALLOC_TRX NB_TCH_NOR_AMR_FR_ALLOC NB_TCH_NOR_AMR_HR_ALLOC NB_TCH_NOR_DATA_ALLOC NB_EGSM_MS_ACCESS_EXCEPT_LU NB_TCH_OUT_HO_REQ_TRX NB_TCH_OUT_HO_PREP_FAIL_CONG_TRX NB_TCH_OUT_HO_SUCC_TRX NB_TCH_OUT_HO_FAIL_REV_TRX NB_TCH_OUT_HO_FAIL_NO_REV_TRX NB_INC_IDR_SUCC_TRX NB_INC_TCH_HO_SUCC_TRX NB_TCH_NOR_ASS_SUCC_TRX NB_TCH_DROP_EST_PHAS_RLF_TRX
Evolium
110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 3BK 11203 0102 DSZZA Page 603
NB_TCH_DROP_EST_PHAS_REM_TRANS_FAIL_TRX NB_TCH_NOR_ASS_EXEC_FAIL_RADIO_TRX NB_HO_7_ConsBadSACCHmicroCell NB_HO_17_TooLowLevUpMicroCell NB_HO_18_TooLowLevDownMicroCell NB_HO_14_HighLevNeigLowCellSlowMS AV_NB_AVAIL_DYN_TS AV_NB_BUSY_DYN_TCH MAX_NB_BUSY_DYN_TCH AV_NB_BUSY_DYN_SDCCH MAX_NB_BUSY_DYN_SDCCH TIME_SDCCH_CONGESTION NB_UL_SINGLE_BLOCK_SIG_RACH NB_UL_ONE_PHASE_SIG_RACH NB_CHANNEL_ASSIGN_DL_AGCH NB_CHANNEL_ASSIGN_DL_PCH NB_INC_EXT_SDCCH_HO_PREP_FAIL_CONG NB_TCH_NOR_ASS_PREP_FAIL_CONG_R_ABIS BSC Counters Catalogue - B9
Edition: 13 Released
MC820 MC821 MC830 MC831 MC850 MC870 MC871 MC8a MC8b MC8c MC8d MC901 MC902 MC903 MC91 MC921a MC921b MC921c MC921d MC921e MC922a MC922b MC922c MC922d MC922e MC922f MC922g MC922h MC923a MC923b MC923c MC923d MC924a MC924b MC924c MC924d MC924e MC924f MC924g MC924h
Evolium
110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 3BK 11203 0102 DSZZA Page 604
NB_MULTIBAND_MS_ACCESS_EXCEPT_LU_CELL NB_INTRA_HO_REQ NB_INTRA_HO_ATPT NB_CELL_PAGING_CMD NB_CELL_IMM_ASS_CMD NB_CELL_CHAN_REQD NB_CELL_IMM_ASS_REJ NB_Suspend_req Nb_Suspend_fail Nb_Suspend_succ NB_INC_INT_SDCCH_HO_PREP_FAIL_CONG NB_TCH_NOR_ASS_HO_REQ_ABLE_TO_PREEMPT NB_PREEMPT_CAP_ALLOC_SUCC NB_PREEMPTED_CALLS NB_PREEMPT_CAP_OUT_DR_ALLOC_SUCC NB_TCH_NOR_ASS_HO_SUCC_PREEMPTABLE NB_INC_EXT_3G_2G_HO_REQ NB_INC_EXT_3G_2G_HO_SUCC NB_INC_EXT_3G_2G_HO_EXEC_FAIL_MS_ACC NB_INC_EXT_3G_2G_HO_ATPT NB_INC_EXT_TCH_3G_2G_HO_EMERGENCY_REQ NB_INC_EXT_TCH_3G_2G_HO_REQ NB_INC_EXT_TCH_3G_2G_HO_PREP_FAIL_3GCONG TIME_3G_HOReject_HL NB_LCS_REQ NB_LCS_SUCC NB_LCS_FAIL_LB NB_LCS_ABORT TIME_SPDCH_LIMIT_HIGH_LOAD NB_OUT_2G_3G_HO_REQ NB_OUT_2G_3G_HO_SUCC NB_OUT_2G_3G_HO_ATPT NB_OUT_2G_3G_HO_EXEC_FAIL_NO_REV NB_OUT_2G_3G_HO_EXEC_FAIL_REV NB_OUT_2G_3G_HO_PREP_FAIL NB_2G_3G_HO_8 BSC Counters Catalogue - B9
Edition: 13 Released
MC924i MC924j MC924k MN1.1 N1.1 N1.10 N1.11 N1.12 N1.2 N1.3 N1.4 N1.5 N1.6 N1.7 N1.8 N1.9 N2.7 N2.9 N3.1 N3.10 N3.11 N3.2 N3.3 N3.4 N3.5 N3.7 N4.2 R01 R01a R03 R04 R04a R05 R05a R06 R07 R08 R09 R10 R1013
NB_2G_3G_HO_9 NB_2G_3G_HO_10 NB_2G_3G_HO_11 TIME_N7_ALIGNED TIME_N7_ALIGNED NB_N7_CHANGEOVER NB_N7_CHANGEBACK NB_N7_RESTORATION NB_N7_LINK_FAIL_ANY_CAUSE NB_N7_LINK_FAIL_FIB_BSN NB_N7_LINK_FAIL_T7_EXP NB_N7_LINK_FAIL_SU_ERROR_RATE NB_N7_LINK_FAIL_CONG NB_N7_LINK_FAIL_ALIGNMENT NB_N7_SU_REC_WITH_ERROR NB_N7_NEG_ACK_REC TIME_N7_UNAVAIL_ERROR_SL TIME_N7_UNAVAIL_MSC_PROC_OUTAGE NB_N7_SIF_SIO_SENT NB_N7_MSU_DISC_DUE_CONG NB_N7_CONG_WITH_MSU_LOST NB_N7_OCTETS_RESENT NB_N7_MSU_SENT NB_N7_SIF_SIO_REC NB_N7_MSU_REC TIME_N7_UNAVAIL_CONG TIME_N7_UNAVAIL_LINK_SET CHANNEL_ID (TCH) RTCH_TYPE RECEIVED_TIMESTAMP AV_RXLEV_UL_HO (11) AV_RXLEV_UL_MCHO (11) AV_RXLEV_DL_HO (11) AV_RXLEV_DL_MCHO (11) AV_RXLEV_PBGT_HO (11) AV_RXQUAL_UL_HO (11) AV_RXQUAL_DL_HO (11) AV_RANGE_HO (11) MS_TXPWR BSIC
Evolium
Edition: 13 Released
Page 605
R1014 R1015 R1016 R11 R1113 R1114 R1115 R1116 R113 R114 R115 R116 R118 R119 R12 R120 R1213 R1214 R1215 R1216 R1313 R1314 R1315 R1316 R1413 R1414 R1415 R1416 R1513 R1514 R1515 R1516 R1613 R1614 R1615 R1616 R17 R1713 R1714 R1715
BCCH_FREQ AV_RXLEV_NCELL PBGT BS_TXPWR BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT SCRAMBLING_CODE FDD_FREQ BTSNUM AV_ECNO BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT SAMPLE_RATE BSIC BCCH_FREQ AV_RXLEV_NCELL
Evolium
11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11
Edition: 13 Released
Page 606
R1716 R1813 R1814 R1815 R1816 R1913 R1914 R1915 R1916 R2013 R2014 R2015 R2016 R2113 R2114 R2115 R2116 R213 R214 R215 R216 R218 R219 R220 R2213 R2214 R2215 R2216 R2313 R2314 R2315 R2316 R2413 R2414 R2415 R2416 R2513 R2514 R2515 R2516
PBGT BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT SCRAMBLING_CODE FDD_FREQ AV_ECNO BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT
Evolium
11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11
Edition: 13 Released
Page 607
R2613 R2614 R2615 R2616 R2713 R2714 R2715 R2716 R2813 R2814 R2815 R2816 R2913 R2914 R2915 R2916 R3013 R3014 R3015 R3016 R3113 R3114 R3115 R3116 R313 R314 R315 R316 R318 R319 R320 R3213 R3214 R3215 R3216 R413 R414 R415 R416 R418
BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT SCRAMBLING_CODE FDD_FREQ AV_ECNO BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT SCRAMBLING_CODE
Evolium
11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11
Edition: 13 Released
Page 608
R419 R420 R513 R514 R515 R516 R518 R519 R520 R613 R614 R615 R616 R618 R619 R620 R713 R714 R715 R716 R718 R719 R720 R813 R814 R815 R816 R818 R819 R820 R913 R914 R915 R916 RMS10 RMS11 RMS12 RMS13 RMS14 RMS15
FDD_FREQ AV_ECNO BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT SCRAMBLING_CODE FDD_FREQ AV_ECNO BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT SCRAMBLING_CODE FDD_FREQ AV_ECNO BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT SCRAMBLING_CODE FDD_FREQ AV_ECNO BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT SCRAMBLING_CODE FDD_FREQ AV_ECNO BSIC BCCH_FREQ AV_RXLEV_NCELL PBGT VQ_NOISY_UL_INTERFERENCE VQ_NOISY_DL_INTERFERENCE VQ_NOISY_UL_COVERAGE VQ_NOISY_DL_COVERAGE VQ_NOISY_UL_UNDEFINED VQ_NOISY_DL_UNDEFINED
Evolium
Edition: 13 Released
RMS16 RMS17 RMS18 RMS20 RMS21 RMS22 RMS23 RMS24 RMS31 RMS32 RMS33 RMS34 RMS35 RMS36 RMS37 RMS38 RMS3a RMS3b RMS44a RMS44b RMS45a RMS45b RMS46a RMS46b RMS47a RMS47b RMS48a RMS48b RMS49a RMS49b RMS4a RMS4b RMS50a RMS50b RMS51 RMS52 RMS53 RMS54 RMS5a RMS5b
VQ_NOISY_UL_BAD_FER VQ_NOISY_UL_GOOD_FER VQ_ABNORMAL_BAD_FER TRE_BAND IND_TRE_OVERLOAD IND_RMS_RESTARTED IND_CI_PARTIAL_OBSERVATION IND_CI_OVERFLOW TOT_SEIZ_TCH TOT_MEAS TOT_MEAS_L1INFO_NOL3INFO TOT_MEAS_DTX_UL TOT_MEAS_DTX_DL PERC_TA_GT_TA_STAT MAX_TA TOT_EMR TPR_RXQUAL_UL_RXLEV_UL TMR_RXQUAL_UL_RXLEV_UL AMR_FR_UL_BAD MAX_AMR_FR_UL_BAD AMR_HR_UL_BAD MAX_AMR_HR_UL_BAD AMR_FR_UL_RXLEV_UL MAX_AMR_FR_UL_RXLEV_UL AMR_FR_DL_RXLEV_DL MAX_AMR_FR_DL_RXLEV_DL AMR_HR_UL_RXLEV_UL MAX_AMR_HR_UL_RXLEV_UL AMR_HR_DL_RXLEV_DL MAX_AMR_HR_DL_RXLEV_DL TPR_RXQUAL_DL_RXLEV_DL TMR_RXQUAL_DL_RXLEV_DL TPR_TIMING_ADVANCE MAX_TIMING_ADVANCE TPR_UL_RXLEV_TA_BAND TPR_DL_RXLEV_TA_BAND TPR_UL_RXQUAL_TA_BAND TPR_DL_RXQUAL_TA_BAND TPR_BFI_RXLEV_UL TMR_BFI_RXLEV_UL
Evolium
31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31
Edition: 13 Released
Page 610
RMS6a RMS6b RMS7a RMS7b RMS8a RMS8b RMS9a RMS9b RMSp80 RMSp90 RMSpa RMSpb RMSpc RMSpd RMSpe RMSpf RMSpg RMSph RMSpi RMSpj RMSpt1 RMSpt2 RMSpt3 RMSpt4 RMSpt5 RMSpt6 RMSpw1 RMSpw2 RMSPw3 S01 S02 S03 S04 S05 S06 S07 S08 S09 S16 S17
TPR_RADIO_LINK MAX_RADIO_LINK TPR_PATH_BALANCE MAX_PATH_BALANCE TPR_CIN MR_CIN TPR_CIF MR_CIF NEIGB_CELL_ID Frequency ARFCN PAR_EN_BALANCED_CI PAR_TA_STAT PAR_VQ_AVERAGE PAR_VQ_RXLEV PAR_VQ_RXQUAL PAR_VQ_RXQUAL_VS_RXFER PAR_VQ_GOOD_RXFER PAR_VQ_BAD_RXFER PAR_VQ_INTF_THRESHOLD PAR_VQ_FER_THRESHOLD TAB_PAR_MEAS_C/I TAB_PAR_MEAS_STAT_BFI TAB_PAR_MEAS_STAT_S TAB_PAR_MEAS_PATH_BALANCE TAB_PAR_MEAS_LEVEL TAB_PAR_MEAS_STAT_TA BS_TX_PWRMAX MS_TX_PWRMAX MAX_POWER_PER_TRX CHANNEL_ID (SCCH) CHAN_SEIZ_TIME CHAN_RELEASE_TIME END_INDICATION (SDCCH) SEIZURE_TYPE (SDCCH) MS_POWER BS_POWER TIMING_ADVANCE NB_FRAMES_NOT_REPEATED NB_FRAMES_REPEATED NB_SABM_AFTER_UA_SENT
Evolium
Edition: 13 Released
S18 S19 S20 S21 S22 S23 S24 S25 S26 T01 T01a T02 T03 T04 T04a T05 T06 T07 T08 T15 T16 T17 T18 T19 T20 T21 T22 T23 T24 T25 V01 V021 V022 V03 V04 V05 V06 V07 V08 V09
NB_PHYSICAL_INFO_SENT NB_ERRONEOUS_FRAMES_SENT NB_REJ_FRAMES_SENT NB_REJ_FRAMES_RECEIVED NB_MS_TX_PWR_MAX_SENT RADIO_LINK_FAILURE_INDICATION PERC_INCOR_SACCH_FRAMES_REC PERC_INCOR_SDCCH_FRAMES_REC SAMPLE_RATE CHANNEL_ID (TCH) RTCH_TYPE CHANNEL_SEIZURE_TIME CHANNEL_RELEASE_TIME END_INDICATION (TCH) SEIZURE_TYPE (TCH) MS_POWER BS_POWER TIMING_ADVANCE NB_FRAMES_NOT_REPEATED NB_FRAMES_REPEATED NB_SABM_AFTER_UA_SENT NB_PHYSICAL_INFO_SENT NB_ERRONEOUS_FRAMES_SENT NB_REJ_FRAMES_SENT NB_REJ_FRAMES_REC NB_MS_TX_PWR_MAX_SENT RADIO_LINK_FAILURE_IND PERC_INCOR_SACCH_FRAMES_REC PERC_INCOR_SDCCH_FRAMES_REC SAMPLE_RATE NB_PTP_CALL_PREEMPTED_VGCS AV_PARALLEL_TCH_VGCS MAX_PARALLEL_TCH_VGCS NB_VGCS_ESTABLISHMENT_REQ NB_VGCS_ESTABLISHMENT_SUCC NB_CM_SERV_REQ_VGCS NB_VGC_RELEASED_VGCS NB_OUT_VGCS_HO_ATPT NB_OUT_VGCS_HO_SUCC NB_INC_VGCS_HO_SUCC
Evolium
Edition: 13 Released
V10 V11 V12 V13 V14 V15 V16 V17 V18 V19 V20 X3.20 X3.21 X3.22 X3.23
NB_INC_VGCS_HO_ATPT NB_TALKER_CHANGE_VGCS NB_VGC_BLOCKED_VGCS NB_VGCS_NOTIFIFICATION_FACCH NB_ASS_REQ_ABLE_PREEMT NB_VGCS_ASS_REQ_ABLE_TO_PREEMPT NB_VGCS_QUEUED NB_VGCS_ESTABLISHED NB_PREEMTED_TCH_VGCS NB_PAGING_FACCH VGCS20 NB_X25_INC_CALL_SUCC_CLOSED NB_X25_OUT_CALL_SUCC_CLOSED NB_X25_INC_CALL_ABNORM_CLOSED NB_X25_OUT_CALL_ABNORM_CLOSED
Evolium
34 34 34 34 34 34 34 34 34 34 34 8 8 8 8
END OF DOCUMENT
Edition: 13 Released
Page 613