Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
4353 2D CADD
Candidate's Instructions
1 Execute the CAD software and open the drawing file 7-PA-BORDER. Ensure that the drawing is currently in model space mode. Create two layers called SCREWDRIVER and RH SCREW, colours Magenta and Green respectively.
Screwdriver
3 Using appropriate commands, draw the Screwdriver on layer SCREWDRIVER to the specification detailed in Figure 1 and position it centrally down the vertical centre of the border shown in Figure 02.
R20
R0.5
22 20
15
68
EQUAL
EQUAL
YOUR NAME
SCALE FILENAME
1
Figure 01 Screwdriver
TODAY'S DATE
DWG TITLE
DWG No
Section 10-5
4353 2D CADD
AutoCAD Training
RH Screw
4 Using appropriate commands, draw the RH Screw on layer RH SCREW to the specification detailed in Figure 3 and position it as detailed in Figure 4 in relation to the Screwdriver.
7 1.5 2.75
3
20
1 PITCH
2 ROOT
Figure 03 RH Screw
0.5
1.75
Figure 05 Assemby
Using appropriate commands, place a copy of the Screwdriver only to the left of the assembly, and a copy of the RH Screw only to the right as specified in Figure 06. Using appropriate commands, place a second copy of the RH Screw vertically above the first one, and make it 3 times larger, as specified in Figure 06.
MAW Design Services
Section 10-6
AutoCAD Training
4353 2D CADD
55
55
Figure 06 Positioning
Using appropriate commands, add the following text on layer TITLE BLOCK to the title block shown in Figure 07, using the text information shown below: Text SCALE = 3 : 1 YOUR NAME TODAY'S DATE 1 : 1 (A4) 2D PA01 TEST - LEV 2 2D PRACTICAL ASSIGNMENT 1 2D PA01 - LEV 2 Text Style BLOCK BLOCK BLOCK BLOCK BLOCK BLOCK BLOCK Height 3 3.5 3.5 3.5 3.5 4 4 Justification Middle Centred Centred Centred Centred Centred Centred Absolute Pos. Your choice 87,34 87,24 147,34 147,24 102,14 172,14
2D PRACTICAL ASSIGNMENT 1
Figure 07 Title Block
2D PA01 - LEV 2
7 8
Make the layer 0 current and ensure the Image Frame is off. Save the drawing as 2D PA01 TEST-LEV 2 on the hard disk, and print/plot a hardcopy onto A4 paper in portrait mode, full size. The completed assignment is shown in Figure 08.
Section 10-7
9
MAW Design Services
50
4353 2D CADD
AutoCAD Training
Completed Assignment
2D PRACTICAL ASSIGNMENT 1
Figure 08 Completed Assignment
2D PA01 - LEV 2
Section 10-8