Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Should you need repair parts for your lathe the following information is necessary to fill your order
promptly and correctly.
1.
Complete name and number of the part as listed in the parts list.
2.
Model and Serial Number of your lathe. Serial number is stamped on top of the front way
at the right end of the lathe.
Page - 2
Page - 3
PAGE:
6
8
9
10
10
11
11
11
12
13
13
14
15
16
16
17
17
17
17
17
18
18
19
19
20
21
21
22
22
23
24
24
24
25
25
25
26
26
27
28
30
31
31
32
Illustration Numbers refer to the following pages with lists for the
LB-210, LA-1240-2, 2200, 6200, and LA-24-1 Quick Change Gear Boxes
and the Miscellaneous Parts for Gear Boxes
Page - 5
Part Number
LP-1002
LP-1076
LP-1004
LP-1005
LP-1006
LP-1007
LP-1008
LP-1009
LP-1010
LP-1011
LP-1012
LP-1013
LP-1014
LP-1016
LP-1100
LP-1147
LP-1146
32/16
32/16
1.7/0.9
1.7/0.9
0.765
0.765
Bore
(*=with
Bushing)
0.438
0.438*
16
0.900
0.382
0.438*
16
18
20
22
23
24
26
28
24
40
0.900
1.000
1.100
1.200
1.250
1.300
1.400
1.500
1.300
2.100
0.382
0.313
0.313
0.313
0.313
0.313
0.313
0.313
0.563
0.370
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.500
0.375*
No. of Teeth
O.D.
Width
22
1.200
0.370
Drive Shaft, 0.625 Dia. Drive End
Stack Shaft, 0.437 Dia.
Slider Shaft, 0.625 Dia.
0.625 w/Key
Part Number
1
2
LP-1017
LP-1020
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
LP-1022
LP-1023
LP-1024
LP-1025
LP-1026
LP-1027
LP-1028
LP-1029
LP-1030
LP-1031
LP-1032
LP-1033
LP-1160
LP-1161
LP-1162
No. of Teeth
32/16
32/16
O.D.
2.13/1.13
2.13/1.13
Width
0.982
0.982
16
1.125
0.483
16
1.125
0.437
18
1.250
0.437
20
1.375
0.437
22
1.500
0.437
23
1.562
0.437
24
1.625
0.437
26
1.750
0.437
28
1.875
0.437
24
1.625
0.592
38
2.500
0.370
22
1.500
0.370
Drive Shaft, 0.625 Dia Drive End
Stack Shaft, 0.562 Dia.
Slider Shaft, 0.750 Dia
Page - 6
Bore
(*=with
Bushing)
0.563
0.563*
0.563*
0.563
0.563
0.563
0.563
0.563
0.563
0.563
0.563
0.563
0.375*
0.750 w/Key
Part Number
LP-1137
LP-1134
LP-1148
LP-1158
LP-1149
LP-1150
LP-1151
LP-1152
LP-1153
LP-1156
LP-1154
LP-1155
LP-1157
LP-1130
LP-1131
LP-1301
LP-1300
LP-1129
No. of Teeth
O.D.
Width
32/16
2.13/1.13
0.592
32/16
2.13/1.13
0.530
16
1.125
0.327
16
1.125
1.200
18
1.250
0.281
20
1.375
0.281
22
1.500
0.281
23
1.562
0.281
24
1.625
0.281
24
1.625
0.312
26
1.750
0.281
28
1.875
0.281
24
1.625
0.640
40
2.625
0.495
22
1.500
0.495
Drive Shaft, 0.625 Dia Drive End
Stack Shaft, 0.625 Dia.
Slider Shaft, 0.750 Dia x 8-7/8" Long
Bore
(*=with
Bushing)
0.563
0.563*
0.688*
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.438*
0.750 w/Key
Description
Plunger
Oilless Brg.
Oilless Brg.
Oilless Brg.
Oilless Brg.
Oilless Brg.
Oilless Brg.
Spacer
Collar
Pin
Knob
Spring
Lever, L.H.
Lever, R.H.
Bushing
Key
Spacer
Spacer
Thread/Feed Chart
End Guard
Lever Assembly
LP-1187 (LA-1207)
Q14-00782
Q14-00794
Q14-00794
Q14-00617
Q14-00794
Q14-00804
LP-1302 (LA-239)
Washer LP-1395(2212)
Snap Ring Q15-00932
LP-1193 (LA-1212)
LP-1193 (LA-1212)
LP-1331 (LA-1210)
LP-1332 (2210)
LP-1229 (LA-1208)
LP-1229 (LA-1208)
LP-1340 (LA-1203)
LP-1344 (2202)
LP-1341 (LA-1204)
LP-1344 (2202)
LP-1343 (LA-1209)
LP-1343 (LA-1209)
LP-1393 (LA-1234)
LP-1307 (2234)
LP-1191 (LA-1224)
LP-1306 (2224)
LP-1079 (6145)
LP-1369 (2221)
LP-1785 (LA-1205)
-------LP-1981 (LA-1202)
-------LP-1415 (LA-1203 or LA-1204) Specify L.H. or R.H.
Page - 7
HEADSTOCK, MISCELLANEOUS See Also "Reverse Gears", "Brackets", "Back Gears", "Change Gears",
"Bull Gears", "Spindle Gears", & "Adapter Sleeves")
Part Number
LP-1191
LP-1219
LP-1223
LP-1238
LP-1243
LP-1256
LP-1257
LP-1258
LP-1259
LP-1276
LP-1280
LP-1283
LP-1294
LP-1295
LP-1296
LP-1303
LP-1304
LP-1310
LP-1337
LP-1347
LP-1355
LP-1356
LP-1358
LP-1359
LP-1360
LP-1361
LP-1405
LP-1406
LP-1407
LP-1409
LP-1418
LP-1449
LP-1453
LP-1454
LP-1459
LP-1483
LP-1582
LP-1583
LP-1584
LP-1586
LP-1638
LP-1717
LP-1795
LP-1796
LP-1827
LP-1843
LP-1844
LP-1864
LP-1933
LP-1934
Description
Spacer
Headstock Clamp (Rear)
Hinge Block (Used with LP-1243)
Stop Pin w/ Set Screw
Hinge Pin
Retaining Collar
Take-Up Nut
Grease Seal
Take-Up Nut
Grease Seal
Change Gear Bracket Stop
Bearing Cover
Spacer, 1-3/8" ID x 1-5/16
Headstock Clamp (Front)
Headstock Clamp (Rear)
Spindle, 1-1/2" - 8 Th'd 12-3/4" Lg (800 & 1800 Series 10" Lathes)
Knob for Gear Cover
Spindle, 1-1/2" - 8 Th'd 9-27/32" Lg (9" Lathe)
Cover Nut
Hinge Bracket
Lock (Reverse Gear Handle)
Hinge Pin for LP-1418
Spring Anchor Pin (12" Lathes)
Spring Anchor Pin (12" Lathes)
Spring (12" Lathes)
Shoulder Pin (12" Lathes)
Take-Up Nut
Retaining Collar
Retaining Nut
Take-Up Nut
Hinge Bracket for LP-1356 & Headstock Cover
Spindle (Model 200 Series)
Hinge Bracket (Snowshoe Cover)
Hinge Pin
Hinge Bracket (Drive Box, 11" Lathes)
Retaining Collar (Ward's Lathe)
Brake Lever
Brake Shoe (12" Lathes)
Handwheel (12" Lathes)
Pulley (12" Lathes)
Belleville Washer
Spindle Spacer
Belleville Washer (14" Lathe)
Bearing Spacer
Hinge Bracket (Drive Box, 10" Lathes)
Take Up Nut (9" Lathe)
Spindle Pulley (9" Lathe)
Stud for Guard
Lock Nut
Lock Nut
Page - 8
HEADSTOCK, MISCELLANEOUS
Part Number
LP-1935
LP-1936
LP-1937
LP-1938
LP-1943
LP-1947
LP-1952
LP-1954
LP-2047
LP-2071
LP-2076
Q22-00634
Continued
Description
Lock Nut
Collar
Spacer
Driver
Fiber Washer
Belleville Washer
Fiber Washer
Spacer
Spindle Cone Pulley, 4-Step V, 11 Lathes
Draw Nut, L-00 Spindle
Belleville Washer
Rubber Bumper for Cover
BULL GEARS
Part Number
LP-1198
LP-1199
LP-1205
LP-1208
LP-1221
LP-1374
LP-1379
LP-1556
LP-1724
LP-1083
LP-1200
LP-1201
LP-1202
LP-1380
LP-1381
LP-1382
LP-1789
LP-1790
LP-1791
LP-1860
LP-1900
Notes:
LP-1198
LP-1199
LP-1205
LP-1208
LP-1221
LP-1374
LP-1379
O. D.
5.286
5.286
5.286
5.750
5.000
5.286
5.286
89T., 12 D.P.
7.583
82T., 14 D.P.
6.000
Pull Pin for LP-1221 (LB-4)
"U" Type Spring for Pull Pin
3/8" Dia. Pull Pin
3/8" to 5/16" Dia. Pull Pin
Locking Lever for LP-1379
Locking Spring for LP-1379
Locking Pin for LP-1379
Pull Pin Bushing
Pull Pin Sleeve
Pull Pin
Spring Wire
Spring (Prior to S/N 37062)
Includes
Width
Bore
Pull Pin
LP-1202
1.188
1.250
LP-1201
1.188
1.492
LP-1201
1.188
1.250
LP-1201
1.250
1.875
LP-1083
1.063
1.492
------1.375
1.492
Incl. LP-1374, LP-1380, LP-1381,
LP-1382
------1.575
2.625
------1.250
2.375
Used on 200 Series Lathes prior to Serial No. 35721 and Wards Lathes prior to approx. 8000
Used on 800 & 1800 Series Lathes after Serial No. 37063
Used on 200 Series Lathes after Serial No. 35722 and Wards Lathes after approx. 8000
Used on 900 & 1900 Series Lathes
Used on 400, 1400, & 9B Series Lathes
Used on 800 Series Lathes prior to Serial No. 37063
Used on 800 Series Lathes prior to Serial No. 37063
Page - 9
Teeth
30T
30T
30T
40T
30T
30T
40T
40T
Tooth
Width
O. D.
Teeth
Total
14
2.286
0.625
1.375
14
2.286
0.625
1.375
14
2.286
0.625
1.375
16
2.625
0.625
1.813
14
2.286
0.625
1.375
(Same as LP-1203, but with Lugs)
12
3.500
1.000
1.625
14
3.000
.875
2.313
Pitch
Hub
Dia.
1.750
1.938
1.938
5.500
2.125
Bore (*=
w/Bush.)
1.250
1.492*
1.250*
1.875*
1.492*
4.625
2.625
2.563
2.000*
No.
Teeth
68/26
70
62
24
28
80/30
62
16 D.P.
14 D.P.
14 D.P.
16 D.P.
14 D.P.
16 D.P.
14 D.P.
4.375
5.143
4.571
1.625
2.143
5.125
4.571
3.660
0.563
0.750
0.438
0.563
5.218
1.165
0.750
1.188
0.625
0.500
1.188
0.875
0.875 (12")
20
14 D.P.
1.571
1.313
0.875 (12")
1.500
1.625
0.875
1.125 (14")
1.125 (14")
0.625 (12")
Pitch
O.D.
75
12 D.P.
6.417
26
12 D.P.
2.333
20
14 D.P.
1.571
Eccentric Shaft Bushing (11" Lathe)
Eccentric Shaft for Quill
Quill for Back Gear
Bushing, 0.625 Lg. (For LP-1232)
Bushing, 1.438 Lg. (For LP-1232)
Spring Anchor Pin (12" & 14" Lathes)
Spring Anchor Pin (12" & 14" Lathes)
Spring (12" Lathes)
Shoulder Pin (12" Lathes)
Shifter Rack Assembly (See also Page 12)
Back Gear Quill
Back Gear Shaft
Eccentric Handle w/ Pin
Back Gear Shaft
Bearing
Collar
Page - 10
Width
Bore
Part
Number
Description
LP-1204
LP-1206
LP-1245
LP-1348
LP-1375
LP-1376
Q21-00922
LA-264
LA-238
LA-243
LA-275
LA-56
LA-241
0922
Latch Key
Latch Spring
Collar w/ Set Screw Q06-00310
Pin for Latch
Shifter Rack Assembly Complete as Shown
Rack
Ball Knob Handle
SPINDLE GEARS
Part
Number
No. of
Teeth & Pitch
O. D.
Width
Bore
LP-1120
LP-1123
LP-1124
LP-1197
LP-1458
42T. 16 D.P.
30T. 16 D.P.
46T. 20 D.P.
30T. 16 D.P.
48T. 16 D.P.
2.750
2.000
2.400
2.000
3.125
0.688
0.656
0.699
0.656
1.250/
0.688
2.000
1.125
1.750
1.313
2.250
DRIVE PARTS
Part
Number
Description
LP-1101
LP-1169
LP-1269
LA-339
LA-317
LA-658
LP-1271
LP-1273
LP-1274
LP-1275
LP-1324
LP-1338
LP-1339
LP-1413
LP-1453
LP-1454
LP-1459
LP-1526
LP-1551
LP-1561
LP-1562
LP-1651
LA-364
LA-307L
LA-307R
2294
LA-318
6872
6871
LA-339
LA-384
LA-379
LA-1023
LA-366
LA-1037
LA-387
LA-936
2126
DRIVE PARTS
LP-1659
LP-1672
LP-1684
LP-1697
LP-1701
LP-1702
LP-1748
LP-1805
LP-1806
LP-1807
LP-1830
LP-1832
LP-1841
LP-1865
LP-1868
LP-1885
LP-1886
LP-1944
LP-1950
LP-1958
LP-1959
LP-1998
LP-2011
LP-2013
Continued
2171
Q22-00647
LA-1036
2444
2447
LB-102
LB-99
LB-100
LB-101
2453
LB-38
LA-603
6865
6271
LA-349
LA-912
2141
LA-382
LA-365
LA-367
6616
6602
6606
DRIVE BELTS
FLAT BELTS
Part Number
Size
Comments
LP-1183-?
LA-679
1 x 39
Part No. ending with -1
LP-1184-?
LA-916
1 x 38
indicates a flat belt with
LP-1185-?
LA-1038
1 x 40
metal connecting clip; -2
LP-1186-1
LA-1086
1 x 53
indicates an endless belt
NOTE: Unless otherwise specified, Flat Belt with connecting clip will be furnished
For Lathe:
10 Bench & Floor Models
10 Cabinet Models
11 Bench/Floor Models
11" Cabinet Models
V-BELTS
Q25-03619
Q25-03618
Q25-03634
Q25-03464
Q25-03643
Q25-03484
Q25-03640
Q25-03642
Q25-03586
Q25-03528
Q25-03527
Q25-03585
Q25-03583
Q25-03584
Q25-02096
Q25-02097
LB-8
LB-105
LA-388
LA-390
LA-935
LA-1146
2129
2140
2150
2173
2174
6274
6862
6863
1/2" x 46"
1/2" x 31"
1/2" x 51"
1/2" x 40"
1/2" x 45"
5/8" x 42"
5/8" x 29"
5/8" x 40"
1/2" x 50"
1" x 61-1/4"
1" x 39-1/4"
1" x 70-3/4"
1-3/16" x 39-3/8"
1-3/16" x 72"
1-3/16" x 41-1/8"
1-3/16" x 69-3/8"
Variable Speed
Variable Speed
Variable Speed
Variable Speed
Variable Speed
Variable Speed
Variable Speed
Page - 12
9" Lathes
9" Lathes
10" Floor Models
10" & 11" Lathes
10" Cabinet Lathes
11" Bench & Floor
10", 11", &12"
Cabinet Models
11" Cabinet Lathes
#2500-V
#2500-V, #6500
#6500
#6530/6565
#6530/6565
#7525
#7525
Part Of Assembly
LP-1546
LP-1547
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Description
Bushing
Bushing
Key
Nut
Stud
Change Gear Bracket (Hub 1-1/2" Thick)
Washer
Collar
Spacer
Spacer
Key
Washer, 1-3/8 x 1/2 x 1/8
Washer, 1-1/8 x 1/16
Change Gear Bracket (14" Lathes)
Stud Ass'y (9", 10", 11" & 2900 Series 12")
Stud Ass'y (2500 Series 12" & 14")
Change Gear Stud
Spacer
Nut
Washer
Page - 13
LA-476
2244
LA-517
2264
2266
2265
LB-236
LB-27
6046
Illus.
Number
Part
Number
No.
of
Teeth
O. D.
Width
Bore (*=with
Bushing)
36
23
1.900
1.250
0.437
0.437
0.625*
0.625
30
2.000
0.563
0.625*
30
2.000
0.563
0.625
16
18
24
32
36
40
44
46
48
52
54
56
60
64
72
20
22
26
28
80
100
127
39
42
66
37
47
1.125
1.250
1.625
2.125
2.375
2.625
2.875
3.000
3.125
3.375
3.500
3.625
3.875
4.125
4.625
1.375
1.500
1.750
1.875
5.125
6.375
8.063
2.563
2.750
4.250
2.438
3.063
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
Page - 14
Part
Number
1
2
3
LP-1061
LP-1062
LP-1040
No. of
Teeth
O. D.
Width
Bore
(*=with
Bushing)
34
46
36
1.800
2.400
2.375
0.563
0.563
0.438
0.625*
0.625
0.625
28
42
1.875
2.750
0.625
0.625
0.625*
0.625
36
48
2.375
3.125
0.625
0.625
0.625*
0.625
30
60
60
54
100
127
66
39
72
64
37
47
2.000
3.875
3.875
3.500
6.375
8.063
4.250
2.563
4.625
4.125
2.438
3.063
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.938
0.625
0.938
0.938
0.625
0.625
0.625
0.625
0.938
0.938
12" & 14" LATHES (16 D.P.) (Except 6530, 6565, & 7500 Series)
1
2
LP-1063
LP-1064
LP-1065
LP-1066
LP-1067
LP-1068
LP-1069
LP-1070
LP-1071
LP-1072
LP-1073
LP-1074
LP-1075
LP-1414
LP-1667
LP-1668
2247
2248
6059
2252
2255
2256
2253
2251
2254
2249
Outside
Diameter
2-3/8"
3"
4"
5"
5"
6-3/8"
3-1/16"
2-5/16"
6-1/2"
Bore
0.313
0.375
0.375
0.500
0.375
0.500
7/16-40 Th'd
3/8-40 Th'd
0.500
1/4" Shank
5/16" Shank
Page - 15
Crossfeed Screw
Crossfeed Nut
L.H.
Acme
Thread
7/16-10
7/16-10
7/16-10
7/16-10
7/16-10
7/16-10
7/16-10
5/8-10
7/16-10
7/16-10
7/16-10
5/8-10
3/4-10
L
S
LP-1099+ (LA-153)
LP-1094 (LA-173)
12-7/8
4-1/16
LP-1099+ (LA-153)
LP-1095 (LA-173-1)
12-7/8
4-1/16
LP-1099+ (LA-153)
LP-1096 (LA-1062)
12-7/8
4-1/16
LP-1105@ (LA-798)
LP-1095 (LA-173-1)
14-1/4
4-1/4
LP-1105@ (LA-798)
LP-1096 (LA-1062)
14-1/4
4-1/4
LP-1106 (LA-1154)
LP-1097 (LA-1163)
13-15/16
5-7/16
LP-1107* (2283)
LP-1098 (2083)
13-15/16
5-7/16
LP-1178 (6137)
LP-1179 (6133)
17-19/32
4-1/32
LP-1329# (2368)
LP-1098 (2083)
18-3/8
8-7/16
LP-1451 (LB-142)
LP-1450 (LB-141)
12-3/16
3-11/16
LP-1534 (LB-63)
LP-1535 (LB-50)
12-3/16
4-1/4
LP-1540# (6334)
LP-1179 (6133)
20-13/16
8-1/2
LP-1608 (7598)
LP-1610 (7438)
20-5/8
3-3/8
LP-1541 - Sleeve for LP-1540
Notes: * Includes Collar; # For Telescopic Taper Attachment; + Prior to Serial #71060;
@ After Serial #71060; Prior To Serial #17151
T
8-3/16
8-3/16
8-3/16
E
3/8-24
3/8-24
3/8-24
3/8-24
3/8-24
Tapped 1/4-28
9-13/16
7/16-40
7/16-40
9-3/4
5/16-24
3/8-24
6-7/8
3/8-24
12-5/16
5/16-24
11-11/16
9/16-18
M
0.734
0.745
1.057
0.745
1.057
1.307
0.963
0.887
0.963
0.806
0.677
0.887
0.938
Compound Screw
Compound Nut
LP-1141 (LA-799)
LP-1140 (LA-152)
LP-1170* (2088)
LP-1188 (6215)
LP-1904* (LA-1171)
LP-1142 (LA-697)
LP-1142 (LA-697)
LP-1142 (LA-697)
LP-1189 (6216)
LP-1142 (LA-697)
LP-1412 (LA-178)
R.H.
ALL DIMENSIONS IN INCHES
Acme
Thread
L
B
T
A
3/8-10
5-1/4
1-5/16
2-27/32
15/16
3/8-10
5-7/16
1-1/2
2-27/32
15/16
3/8-10
5-13/16
1-5/16
2-5/8
1-1/2
1/2-10
7-7/8
2-9/16
4-23/32
1/2
3/8-10
5-7/8
2-13/16
2-1/2
----Compound Rest Nut (Rectangular) 3/8-10 R.H. Acme 0.500 C.L. Height
(Prior to S/N 32073) ORDER LP-1142 & INSTRUCTIONS LP-1599-X
Page - 16
MITER GEARS
Part
Number
Description
LP-1212
LP-1213
LA-188
Gear w/ Bushing & Spur Gear
LA-189
Gear w/ Key
RECOMMEND ABOVE 2 ITEMS BE ORDERED TOGETHER
LP-1230
LA-256
Collar w/ 2 of Q06-00309
LP-1312
LA-196
Bearing w/ Q14-00618
CROSSFEED GEARS
Part
Number
No. of
Teeth & Pitch
O. D.
Width
Bore
LP-1115
LP-1116
LP-1125
LP-1180
LP-1477
LP-1609
LA-190
LA-796
LA-1160
6136
LB-143
6453
16T. 16 D.P.
16T. 16 D.P.
16T. 16 D.P.
18T. 16 D.P.
16T. 20 D.P.
18T. 16 D.P.
1.125
1.125
1.125
1.250
0.900
1.250
0.328
1.625
0.625
0.813
0.500
0.430
0.430
0.618
0.430
0.740
1.500
No. of
Teeth & Pitch
O. D.
Part
Number
Description
LP-1629
LP-1630
LP-1631
LB-92
LA-154
LA-1069
18-13/16" Lg.
26-13/16" Lg.
38-15/16" Lg.
LEAD SCREWS
Old Part No.
LA-1235
Bore
12T. 16 D.P.
0.875
0.625
w/ 9/16 Shaft
33/16T. 16 D.P.
2.19/1.13
.438/.562
0.500
33/16T. 16 D.P.
1.875
.438/.562
0.500
16T. 16 D.P.
1.125
w/ 5/8 Shaft
16T. 16 D.P.
1.125
1.344
0.500
40/16T. 20/16 DP
2.10/1.13
2.063
0.625
Handle Gear Shaft (Can use w/ LP-1286 as Alternate to LP-1268)
15T. 12 D.P.
1.417
w/ 5/8 Shaft
15T. 12 D.P.
1.417
w/ 5/8 Shaft
RACKS
Part
Number
LP-1946
Width
Description
For 10" Short Bed Lathe w/QC Gear Box
Page - 17
GEARS, APRON
Part
Number
Description
LP-1215
LP-1252
LP-1260
LP-1267
LP-1285
LP-1287
LP-1288
LP-1289
LP-1290
LP-1291
LP-1313
LP-1482
LP-1497
LP-1673
LP-1733
LA-191
LA-522-1A, L-1423
LA-763
LA-547-1
LA-547
LA-556
LA-556-1
LA-550
LA-550-1
LA-551-1
LB-69
LA-158
6185, L-1648
LB-70
7753
APRON CLUTCH
Part
Number
LP-1251
LP-1261
LP-1262
LP-1263
LP-1281
LP-1282
LP-1352
LP-1519
LP-1520
LP-1559
LP-1560
LP-1564
LP-1573
LP-1632
LP-1730
LP-1731
LP-1751
LP-1752
LP-1758
LP-1759
LP-1760
LP-1826
LP-1834
LP-1871
LP-1916
LP-1920
Q13-00679
Description
LA-539
LA-766
LA-764
LA-765
LA-521
LA-522
LA-760
LA-562-1
LA-532
LA-534
LA-533
LA-767
2271
LA-536
6251
7751
LA-566
6192
Thrust Ring
Retainer
Shaft
Spring
Clutch Disc (Outside Lobes)
Clutch Disk (Inside Spline)
Friction Washer
Worm, for 10", 11" &12" Lathes (From S/N 27623 to 67012)
Worm Wheel (Straight Bore from S/N 27623)
Worm Wheel (Tapered Bore to S/N 27623)
Clutch Cone
Belleville Washer
Worm, 12" Lathes (From S/N 67012)
Worm Wheel Bearing
Worm Wheel (14" Lathe)
Worm (14" Lathe after S/N 78626)
Sleeve Gear (Prior to S/N 27623)
Worm (14" Lathe to S/N 78626)
Spacer (Use with LP-1519 in Lieu of LP-1759)
Worm (Prior to S/N 27623)
Worm Washer (Prior to S/N 27623)
Worm Bearing Oiler (14" Lathe to S/N 78626)
Lever & Hub Ass'y
Sleeve Gear (Prior to S/N 50843)
Clutch Knob, Tapped 3/8-24
Clutch Knob, 5/16 Hole
Ball Thrust Bearing (For Clutch)
LA-562
LA-561
6167
LA-761A
LA-520
LA-531-1
LA-531
0679
Page - 18
APRON, MISCELLANEOUS
Part
Number
Description
LP-1218
LP-1220
LP-1225
LP-1226
LP-1227
LP-1228
LP-1255
LP-1270
LP-1279
LP-1284
LP-1298
LP-1314
LP-1408
LP-1461
LP-1543
LP-1558
LP-1563
LP-1637
LP-1734
LP-1753
LP-1792
LP-1852
LP-1909
Q14-01281
LA-164
LA-530
LA-564
LA-560
LA-577
LA-558
LA-565
2137
LA-559
LA-546
LA-298
LA-220
LA-527-1
2273
LA-156-1
LA-549
LA-192-1
LA-544
LA-167
6193
6189
LA-156
6169
01281
Part
Number
LP-1090
LP-1091
LP-1092
LP-1093
LP-1102
LP-1117
LP-1466
LP-1084
LP-1085
LP-1084
LP-1761
Includes
For
Center
Old Part No.
Pin Type
Lead Screw
Height
LA-352 (From S/N 20324) Round Pin
3/4-8
0.94 (10" & 11" w/ Plain Apron)
LA-529
LP-1103 w/ Hex
3/4-8
1.31 (10",11" & 2900 w/ Auto Apron)
2274
Base & 1/4-20
7/8-8
1.313 (2500 Series)
6178
Hole
1-1/8-8
1.313 (14" Lathes)
LA-159 (To S/N 20324) 10-32 Th'd Str. Pin
3/4-8
0.938 *N/A ORDER LP-1117*
1/4-20 Th'd Str. Pin
3/4-8
0.938
LB-184
LP-1465
3/4-8
0.938 (9" Lathes)
LA-354
Half Nut Cam & Shaft, 1.063 Shoulder Length
LA-161A
Half Nut Cam & Shaft, 1.390 Shoulder Length
LA-541
Half Nut Cam & Shaft, 0.945 Shoulder Length
6177A
Half Nut Cam & Shaft, (14" Lathe)
Page - 19
SADDLE, MISCELLANEOUS
Part
Number
LP-1079
LP-1224
LP-1242
LP-1277
LP-1299
LP-1317
LP-1320
LP-1322
LP-1367
LP-1371
LP-1372
LP-1377
LP-1398
LP-1399
LP-1487
LP-1488
LP-1489
LP-1490
LP-1498
LP-1506
LP-1507
LP-1517
LP-1518
LP-1533
LP-1552
LP-1574
LP-1578
LP-1599
LP-1633
LP-1647
LP-1648
LP-1725
LP-1726
LP-1727
LP-1728
LP-1729
LP-1737
LP-1738
LP-1740
LP-1798
LP-1799
LP-1800
LP-1801
LP-1802
LP-1804
LP-1836
LP-1837
LP-1838
Description
Washer
Saddle Lock Nut
Saddle Lock Screw, 2-3/8" Lg.
Saddle Lock Screw, 1-3/4" Lg.
Lock Plug
Dial Lock Screw
Dial Lock Slug (Nylon Ball)
Feed Dial, 1-3/4" Dia. (See also LP-1533)
Felt Washer
Swivel Lock Bolt w/ Nut (12" & 14" Lathes)
Stud
Dial Lock Slug
Feed Dial, 1-7/32" Dia. (Use with LP-1399 or LP-1552)
Crossfeed Bushing, 1-7/32" Dia. (7/8-14 Th'd) (Use with LP-LP-1398)
Compound Bushing, 15/16" Dia (Obsolete, Order LP-1398 & LP-1552)
Saddle Lock Screw (14" Lathe)
Saddle Lock (14" Lathe)
Compound Rest Top (9" Lathe)
Bracket for Crossfeed Screw
Crossfeed Bushing, 15/16" Dia. (Obsolete, Order LP-1398 & LP-1399)
Compound Rest Top
Spring for Dial
Washer for LP-1488
Compound Bushing, 1-3/4" Dia. (11/16-16 Th'd)
Compound Bushing, 1-7/32" Dia. (11/16-16 Th'd) See LP-1533 & LP-1322
Feed Dial, 15/16" Dia. (Obs, Order LP-1398 & Bushing LP-1399 or LP-1552)
Compound Rest Swivel
Compound Rest Swivel
Thrust Bearing
Compound Rest Top (12" Lathe)
Compound Rest Swivel (12" Lathe)
Thrust Bearing
Thrust Washer
Compound Bushing (12" Lathe)
Cross Feed Dial (12" Lathe)
Compound Bracket
Crossfeed Bushing
Cross Feed Dial Bracket
Swivel Pin
Stud
Stud
Knurled Nut
Binding Lever
Bed Bracket
Cross Slide Extension
Compound Rest Top (14" Lathe)
Compound Rest Swivel (14" Lathe)
Compound Rest Base (Cross Slide) (From S/N 50843)
Page - 20
SADDLE, MISCELLANEOUS
Continued
Part
Number
Description
LP-1845
LP-1851
LP-1903
LP-1905
LP-1928
LP-1929
LP-1931
LP-1932
LP-2015
Q10-03322
LB-64
LB-47
LA-1167
7352
LA-693
LA-692
LA-684
2762
LA-691
LA-198
Description
LP-1318
LP-1319
LP-1362
LP-1363
LP-1365
LP-1366
LP-1368
LP-1373
LP-1410
LP-1634
LP-1927
LA-749
LA-183
LA-1159
LA-1176
LA-535
LA-1063
LA-1064
LA-182
7411
6217
LA-465
Description
Felt Wiper Set for 10", 11", & 12" Lathes (4)
Felt Wiper Set for 14" Lathes (4)
Wiper Cover Set for 10", 11", & 12" Lathes (4)
Wiper Cover Set for 14" Lathes (4)
Front Felt Wiper for Chucker Saddle Slide
Rear Felt Wiper for Chucker Saddle Slide
Page - 21
Description
Tool Post
Tool Post Screw
Tool Post Ring
Tool Post Block
Tool Post Wedge
Tool Post Wrench
Tool Post Complete as Shown (9", 10", 11", & 12" Lathes)
Tool Post Wedge
Tool Post Ring
Tool Post
Tool Post Screw
Tool Post Block
Tool Post Wrench
Description
Front Tool Block
Rear Tool Block
Wedges, Pair
T-Nut
Front Tool Block
Rear Tool Block
THREADING DIAL
Part
Number
LP-1241
LP-1248
LP-1249
LP-1250
LP-1351
LP-1767
LP-1768
LP-1823
LP-1825
LP-2185
Q14-00797
LA-322
6196
6195
LA-1122
0797
Description
Mounting Screw
Dial Face, 1-1/4" Dia.
Shaft
Dial Gear, Straight Teeth
Dial Gear, Helical Teeth
Threading Dial Ass'y, Complete
(10 & 11 Lathes)
Dial Face, 7/8" Dia.
Threading Dial Housing (14" Lathes)
Threading Dial Ass'y, Complete (14 Lathes)
Threading Dial Assy Complete (12 Lathes)
Oilless Bearings
Page - 22
TAILSTOCK SCREWS
Part
Number
LP-1143
LP-1144
LP-1190
A
1.0
1.0
1.1
B
1.19
1.19
1.31
Tailstock Screw
T
2-31/32
4-13/32
6-3/16
L
5-5/16
6-3/4
8-19/32
L.H. Acme
Thread
7/16-10
7/16-10
5/8-10
TAILSTOCK PARTS
Part
Number
LP-1217
LP-1222
LP-1239
LP-1240
LP-1244
LP-1246
LP-1272
LP-1278
LP-1297
LP-1311
LP-1321
LP-1323
LP-1336
LP-1357
LP-1468
LP-1469
LP-1470
LP-1486
LP-1488
LP-1635
LP-1636
LP-1769
LP-1770
LP-1771
LP-1772
LP-1951
LP-1955
LP-1956
Q19-00626
Q23-03308
Q23-03575
Description
Binding Lever
Screw Retainer
Tailstock Spindle, 1-1/8" Dia. x 5-5/16" Lg. (#2 MT) (9" & 10" Lathes)
Binding Plug
Dauber
Hex Nut
Retainer
Binding Stud, 5/16" Dia. x 2" Lg.
Tailstock Spindle, 1-3/8" Dia. x 6-13/16" Lg. (#2 MT) (11" & 12" Lathes)
Clamp
Spindle Key
Binding Stud, 5/16" Dia. x 2-3/8" Lg.
Rubber Washer
Binding Plug
Screw Retainer (14" Lathe)
Thrust Washer (14" Lathe)
Rubber Washer (14" Lathe)
Tailstock Wrench (14" Lathe)
Tailstock Adjusting Screw (14" Lathe)
Tailstock Clamp (14" Lathe)
Tailstock Nut (14" Lathe)
Tailstock Spindle (14" Lathe)
Binding Plug, Top (14" Lathe)
Binding Stud (14" Lathe)
Binding Plug, Bottom (14" Lathe)
Spindle Key
Tailstock Top (14" Lathe)
Tailstock Base (14" Lathe)
Ball Oiler
Tailstock Wrench (10", 11", & 12" Lathes)
Tailstock Wrench (9" Lathes w/ 3/4" Hex Nut)
Page - 23
ACCESSORIES
FACE PLATES, DRIVE PLATES, & CHUCK BACKS
Part
Number
LP-1378
LP-1383
LP-2218
LP-1385
LP-1866
LP-1867
LP-2345
LP-1463
LP-1464
FOLLOWER REST
LP-2414
LP-2415
LP-2416
AC-196
AC-2196
6320
LP-2417
AC-192
AC-189
AC-290
AC-2189
6315
LP-2417
LP-2418
LP-2427
AC-192
AC-193
6323
TURRET PARTS
LP-1686
LP-1840
LP-1853
LP-1875
LP-1876
LP-1877
LP-1878
LP-1879
LP-1881
LP-1882
LP-1883
LP-1884
LP-1940
LP-1941
LP-1948
Q23-03639
LA-578
6686
LA-921
LA-412
LA-447
LA-413
LA-985
LA-984
LA-583
LA-990
LA-924
LA-922A
LA-580
LA-975
LA-581
ACCESSORIES
DEAD CENTER
Description
o
3 45' to #2 Morse Taper (To Serial #52576)
#3 M.T. to #2 M.T. (9" & 10" Lathes)
o
2 to #2 Morse Taper (From Serial #52576)
#3AT Collet Adapter (9" & 10" Lathe)
Nose Cap for 1-1/2" 8 Th'd Spindle Nose
LP-1839
LP-1842
LP-1854
LP-1855
LP-1930
6023
LA-1056
LA-1055
LA-1055-1
6832
2 to #3 Morse Taper
Nose Cap for 2-1/4" 8 Th'd Spindle Nose
o
3 45' to 5-C Collet Adapter (To Serial #52576)
o
2 to 5-C Collet Adapter (From Serial #52576)
o
2 to #3 Morse Taper (For L-0 Spindles Only)
TAPER ATTACHMENT
LP-1502
LP-1803
LP-1896
LP-1897
LP-1898
LP-1910
LP-1911
LP-1912
LP-1913
LP-1914
LP-1915
LP-1917
LP-1918
LP-1968
LP-1969
LP-1970
LP-1971
LP-1972
LP-1973
LP-1974
LP-1975
LP-1986
LP-1987
LP-1988
LP-1989
LP-1990
LP-1991
LP-1992
LP-1994
LP-1995
LP-1996
LP-1997
LP-2001
2357
AC-260
AC-258
AC-257
AC-299
AC-298
AC-295
AC-2296
AC-2295
AC-270
AC-275
AC-296
AC-256
AC-267
AC-260
AC-262
AC-263
AC-265
AC-266
AC-264
AC-269
2352
2353
2363
2354
2360
2372
2769
2369
2373
2366
2365
AC-261
ACCESSORIES
TAPER ATTACHMENT (Continued)
LP-2004
LP-2005
LP-2006
LP-2007
LP-2008
LP-2009
LP-2010
LP-2042
2364
2359
6335
7348
6337
2350
6329
2370
Swivel Pin
Gib for Slide Block
Crossfeed Sleeve Gear (14" Lathe)
Cross Slide Extension (14" Lathe)
Bed Bracket
Telescopic Taper Attachment Complete - 2500 Series 12" Lathe
Telescopic Taper Attachment Complete - 6500 Series 14" Lathe
Thrust Washer
COLLET ATTACHMENT
LP-1670
LP-1671
LP-1675
LP-1676
LP-1677
LP-1678
LP-1681
LP-1764
LP-1765
LP-1842
AC-155
AC-152
AC-369-1
AC-370
AC-365-1
AC-373-1
AC-366-1
AC-160
AC-162
LA-1056
LP-1854
LP-1855
LP-1894
LP-1899
LP-1900
LP-1919
LP-1925
LP-2000
LP-2017
LP-2019
LP-2020
LP-2021
LP-2022
LP-2023
LP-2024
LP-2025
LP-2032
LA-1055
LA-1055-1
AC-164
AC-368
LA-248
7953
7954
AC-174
LA-1052
2381
LA-1053
LA-1054
AC-252
2396
2636
2391
AC-163
CARRIAGE STOPS
For 9, 10 11 and 12 Logan Lathes (Call for stops for 14 Lathes)
LP-1624
AC-225
Single
LP-1626
AC-234
Micrometer Stop
Page - 26
ACCESSORIES
CHUCKS
Part Number
Q23-03735
78050653
Q23-03736
Q23-03737
Q23-03738
Q23-03739
Q23-03740
Q23-03741
Q23-03742
Q23-03743
Q23-03744
Q23-03745
Q23-03746
Q23-03747
Q23-03748
Q23-03782
Chuck Size
6
6
6
8
6
8
6
8
6
8
10
8
10
8
10
6
Number of Jaws
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
3
Chuck Mount
1 - 8
2 - 8
Plain Back
Plain Back
L-00
L-00
L-0
L-0
Plain Back
Plain Back
Plain Back
L-00
L-00
L-0
L-0
SET-TRU Style
Plain Back Chucks require Mounting Plate, which must be finish machined on your
Lathe. This insures the greatest accuracy.
LP-1463
Mounting Plate, 6-3/8 Dia, 1 -8 Thread
LP-1464
Mounting Plate, 6 3/8 Dia, 2 -8 Thread
7866066
Mounting Plate for 6 SET-TRU style Chucks, 2-8 Thread
7866062
Mounting Plate for 6 SET-TRU style Chucks, 1-8 Thread
7866064
Mounting Plate for 6 SET-TRU style Chucks, 2 3/16-10 Thread
78799061
Mounting Plate for 6 SET-TRU style Chucks, L-00 Spindle
Many other Chucks and adapters also available CALL/FAX/EMAIL
Page - 27
100 T
127 T
LP-1056
LP-1057
LP-1071
LP-1072
37 T
47 T
LP-1665
LP-1666
N/A
N/A
MM Pitch
*
*
*
*
*
*
*
*
*
*
*
*
*
*
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.60
0.65
0.70
0.75
0.80
0.90
1.00
1.20
1.25
1.30
1.40
1.50
1.75
2.00
2.25
2.50
2.75
3.00
3.50
4.00
4.50
5.00
5.50
6.00
QC Lathes
(60T Gearbox Gear)
Gear Box
Stud Gear
Setting
48
48
72
42
48
54
48
72
39
42
72
48
54
48
72
60
39
42
72
42
48
54
60
66
72
42
48
54
60
66
72
(Typical Diagrams
on Next Page)
Driven
Driver
Driven
Screw Gear
32
40
48
56
16
18
20
24
26
28
24
30
36
40
48
40
52
56
48
56
32
36
32
44
48
28
32
36
40
44
48
72
72
72
72
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(none)
72
72
72
72
72
72
72
72
72
72
72
100
100
100
100
100
100
100
100
100
100
80
100
100
100
100
80
100
100
80
80
40
40
32
40
40
20
20
20
20
20
20
160
128
160
80
80
80
64
80
40
40
64
40
40
32
40
32
20
20
32
16
16
16
16
16
16
8
8
8
8
8
8
Page - 29
NEW PRODUCTS!
Quick Change Tool Posts and Sets
Your choice, piston or wedge style. Piston style for economy, Wedge style for maximum
rigidity and accuracy.
Both accept the industry standard toolholders, and interchange with Aloris and other
tooling.
Exclusive from LOGAN ACTUATOR CO.: Upon request,
we will machine the T-Nut to fit your LOGAN lathe at NO
ADDITIONAL CHARGE. For lathes OTHER than Logan,
a blank nut is provided which can be machined by the user to
fit your T-Slot.
Swing
Used on:
9 to 12 For all Logan 9 to 12 Lathes
10 to 15 For Logan 12 or 14 Lathes
Swing
Used on:
9 to 12 For all Logan 9 to 12 Lathes
10 to 15 For Logan 12 or 14 Lathes
All sets include Toolpost and 5 holders: 1 turning/facing (250x01), 1 turning/facing/boring (250-x02), 1 heavy-duty boring bar
(250-x04), 1 cut-off blade holder (250-x07) and 1 knurling/facing
holder, including medium diamond knurls (250-x10). Replace the x
with the series of your toolpost (1=100 series, 2=200 series)
Q23-03786
Q23-03828
PH2-250-100
PH2-250-101
PH2-250-201
$199
$230
$128
$31
$33
Q23-03827
Q23-03829
PH2-250-111
PH2-250-102
PH2-250-202
$249
$299
$169
$32
$36
Page - 30
$233.00
$281.50
$208.50
Page - 31
5C Collet Chucks
For Mounting With Adapter Plates
6000 R.P.M.
The 5C Collet Chucks are designed for use with all 5C Collets. They
can be used for turning, facing, boring, grinding and milling operations
on lathes and grinding machines. The simple key operated scroll
provides a uniform, distortion free clamping of workpieces and low
collet exchange times. Their simple design, rugged construction and
fine workmanship assure high quality and long service life.
BODY - made of high quality FORGED STEEL.
FORGED SCROLL - fully hardened and ground for longer life.
PINIONS - hardened and ground.
5-C adjustable collet stop for the 5C Collet Chuck are available.
Standard Accessories:
1 Chuck Wrench, 1 set of mounting bolts, 1 Hex Key.
Collets not included, available separately.
Prices
7-862-0501
LP-1463
LP-1464
$459.50
$89.70
$89.70
Page - 32
$574.50
$118.50
$142.25
Page - 33
Page - 34
T-SHIRTS
6.1 oz all cotton Navy T-Shirt, emblazoned with the Logan Logo on
the back and on the front, show off your love of Logan Lathes with a
picture of a classic Logan Lathe.
And keep our favorite reminder close to your heart,
Measure Twice, Cut Once!
$18.00 each
Sizes Large, X-Large, XXL and 3XL
Machine Wash Cold to preserve the screenprinting