Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
EasyCoder C4
Bar Code Label
Printer
Intermec Printer AB
Idrottsvgen 10
P.O. Box 123
S-431 22 Mlndal
Sweden
Service support: +46 31 869500
The information contained herein is proprietary and is provided solely for the purpose of allowing
customers to operate and/or service Intermec manufactured equipment and is not to be released,
reproduced, or used for any other purpose without written permission of Intermec.
Information and specifications in this manual are subject to change without notice.
2003 by Intermec Printer AB
All Rights Reserved
EasyCoder, EasyLAN, Fingerprint, and LabelShop are registered trademarks of Intermec
Technologies Corp. The word Intermec, the Intermec logo, InterDriver, and PrintSet are trademarks
of Intermec Technologies Corp.
The name Centronics is wholly owned by GENICOM Corporation.
Throughout this manual, trademarked names may be used. Rather than put a trademark ()
symbol in every occurrence of a trademarked name, we state that we are using the names only in an
editorial fashion, and to the benefit of the trademark owner, with no intention of infringement.
Preface
Contents
1 Introduction
Spare Parts
Bottom Cover........................................................................................................................6
Main Board...........................................................................................................................7
Base Frame............................................................................................................................8
Platen Roller .........................................................................................................................9
Peel-Off Mechanism ...........................................................................................................10
Motor Kit ...........................................................................................................................11
Media Guide Kit .................................................................................................................12
Base Lock Kit......................................................................................................................13
Sensor Kit ...........................................................................................................................14
Media Spindle.....................................................................................................................15
Printhead Kit ......................................................................................................................16
Print Frame (Direct Thermal) .............................................................................................17
Print Frame (Thermal Transfer)...........................................................................................18
Lock Kits ............................................................................................................................19
Top Cover ...........................................................................................................................20
Power Supply ......................................................................................................................21
Memory Cartridge ..............................................................................................................22
Cutter ................................................................................................................................23
Miscellaneous......................................................................................................................24
iii
Preface
iv
Introduction
This chapter contains the Intermec Spare Parts Policy regarding printers
and provides an overview of the EasyCoder C4 with options.
Chapter 1 Introduction
Chapter 1 Introduction
2
3
8
7
5
Pos.
Description
Remarks
Top Cover
See page 20
Media Spindle
See page 15
Base Frame
Platen Roller
See page 7
Peel-Off Mechanism
See page 10
Bottom Cover
See page 6
Printhead Kit
See page 16
Main Board
See page 7
Power Supply
See page 21
See page 22
Cutter (option)
See page 23
Miscellaneous
See page 24
Chapter 1 Introduction
Spare Parts
This chapter shows the various spare parts and lists their part numbers. The
text in the description field is selected to help understanding the purpose
of the part and is not necessarily the same as the text on drawings, packinf
slips, and invoices.
Bottom Cover
Pos.
Part No.
Description
Remarks
1-092201-90
Main Board
Pos.
Part No.
Description
Remarks
1-971689-90
Base Frame
2
3
1
7
4
6
5
Pos.
Part No.
Description
Remarks
1-092101-91
1-092220-00
1-092234-90
1-092212-90
See page 9
1-092109-90
Motor Kit
See page 11
1-092107-90
See page 13
1-092215-90
See page 12
Platen Roller
Pos.
Part No.
Description
Remarks
1-092212-90
Peel-O Mechanism
Pos.
Part No.
Description
Remarks
1-092104-90
10
Motor Kit
Pos.
Part No.
Description
1-092109-90
Motor Kit 203.2 dpi (8 dots/mm) printhead Includes 1 stepper motor assy with bracket,
thermistor, and cables, 2 gears, 1 washer, 2
E-rings, and 2 self-locking nuts
1-092120-90
Remarks
11
Pos.
Part No.
Description
Remarks
1-092215-90
12
Pos.
Part No.
Description
Remarks
1-092107-90
13
Sensor Kits
1
Feed Switch
Ribbon Sensor
Feed Switch
Pos.
Part No.
Description
Remarks
1-092085-91
1-092085-96
14
Media Spindle
Pos.
Part No.
Description
1-092204-90
Media Spindle
Remarks
15
Printhead Kit
Pos.
Part No.
Description
Remarks
1-092106-90
1-092121-90
Printhead Kit assy. 300 dpi (11.81 dots/mm) Includes printhead, bracket, printhead
cover, V-blade, GND terminal, and screws
1-092266-90
V-blade (standard)
1-092266-95
16
Pos.
Part No.
Description
Remarks
1-092241-91
1-092290-90
DT Lock Kit
See page 19
17
1
2
Pos.
Part No.
Description
Remarks
1-092102-91
1-092243-90
TT Lock Kit
See page 19
18
Lock Kits
Pos.
Part No.
Description
1-092290-90
DT Lock Kit
1-092243-90
TT Lock Kit
Remarks
19
Top Cover
Pos.
Part No.
Description
Remarks
1-092200-90
1-092208-00
1-092203-00
20
Power Supply
Pos.
Part No.
Description
Remarks
1-092515-90
21
Memory Cartridge
Pos.
Part No.
Description
Remarks
1-092103-90
22
Cutter
3
2
Pos.
Part No.
Description
Remarks
1-092118-90
Cutter Kit
1-092302-90
Cutter Housing
Including 1 screw
1-987221-90
Cutting Mechanism
1-971688-90
Cutter pcb.
23
Pos.
Part No.
Description
1-975583-18
Parallel Cable
1-975584-00
Serial Cable
RS-232
1-110501-00
Cleaning Cards
25-pack
1-092511-90
10-pack
24
Remarks
Intermec Printer AB
Idrottsvgen 10, P.O. Box 123
S-431 22 Mlndal, Sweden
tel +46 31 869500
fax +46 31 869595
www.intermec.com
*1-960493-02*
*1-960493-02*