Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
External ballistics is the part of the science of ballistics that deals with the behaviour of a nonpowered projectile in flight. External ballistics is frequently associated with firearms, and deals with the behaviour of the bullet after it exits the barrel and before it hits the target.
Projectiles like arrows or sabots like the M829 Armor-Piercing, Fin-Stabilized, Discarding Sabot (APFSDS) achieve stability by forcing their center of pressure (CP) behind their center of gravity (CG) with tail surfaces. The CP behind the CG condition yields stable projectile flight, meaning the projectile will not overturn during flight through the atmosphere due to aerodynamic forces. Projectiles like small arms bullets and artillery shells must deal with their CP being in front of their CG, which destabilizes these projectiles during flight. To stabilize such projectiles the projectile is spun around its longitudinal (leading to trailing) axis. The spinning mass makes the bullets length axis resistant to the destabilizing overturning torque of the CP being in front of the CG.
Typical trajectory graph for a M4 carbine and M16A2 rifle using identical M855 cartridges with identical projectiles. Though both trajectories have an identical 25 m near zero, the difference in muzzle velocity of the projectiles gradually causes a significant difference in trajectory and far zero. The 0 inch axis represents the line of sight or horizontal sighting plane. The effect of gravity on a projectile in flight is often referred to as bullet drop. It is important to understand the effect of gravity when zeroing the sighting components of a gun. To plan for bullet drop and compensate properly, one must understand parabolic shaped trajectories. Due to the near parabolic shape of the projectile path, the line of sight or horizontal sighting plane will cross the projectiles trajectory at two points called the near zero and far zero in case the projectile starts its trajectory (slightly) inclined upward in relation to the sighting device horizontal plane, causing part of the bullet path to appear to rise above the horizontal sighting plane. The distance at which the firearm is zeroed, and the vertical distance between the sighting device axis and barrel bore axis, determine the apparent severity of the "rise" in both the X and Y axes (how far above the horizontal sighting plane the rise goes, and over what distance it lasts). Many firearms ballistics tables and graphs show a rise in trajectory at distances shorter than the one (far zero) used for sight-in. This apparent "rise" of the projectile in the first part of its trajectory is relative only to the sighting plane, and is not actually a rise. The laws of physics dictate that the projectile will begin to be pulled down by gravity as soon as it leaves the support of the barrel bore at the muzzle, and can never rise above the axis of the bore. The apparent "rise" is caused by the separation of the plane of the sighting device axis and that of the bore axis and the fact that the projectile rarely leaves the bore perfectly horizontally. If a firearm is zeroed at 100 meters, then the far horizontal sighting plane and the projectile path must "cross" at that distance; the sighting line must be adjusted to intersect with the projectile path at 100 meters. In the case of a bore axis that is
maintained in a perfectly horizontal position, the sighting device must be inclined downward to achieve this intersection. The axial separation distance between the line of sight and the bore axis and trajectory of the projectile dictate the amount of angular declination required to achieve the required intersection.
projectile velocity divided by the speed of sound. During the flight of the projectile the M will decrease, and therefore (in most cases) the BC will also decrease. Most ballistic tables or software takes for granted that one specific drag function correctly describes the drag and hence the flight characteristics of a bullet related to its ballistics coefficient. Those models do not differentiate between wadcutter, flat-based, spitzer, boat-tail, very-low-drag, etc. bullet types or shapes. They assume one invariable drag function as indicated by the published BC. Several drag curve models optimized for several standard projectile shapes are however available. The resulting fixed drag curve models for several standard projectile shapes or types are referred to as the:
G1 or Ingalls (by far the most popular) G2 (Aberdeen J projectile) G5 (short 7.5 boat-tail, 6.19 calibers long tangent ogive) G6 (flatbase, 6 calibers long secant ogive) G7 ((long 7.5 boat-tail, 10 calibers tangent ogive, preferred by some manufacturers for very-lowdrag bullets) G8 (flatbase, 10 calibers long secant ogive) GL (blunt lead nose)
How different speed regimes affect .338 caliber rifle bullets can be seen in the .338 Lapua Magnum product brochure which states Doppler radar established G1 BC data.[6][7] The reason for publishing data like in this brochure is that the Siacci/Mayevski G1 model can not be tuned for the drag behaviour of a specific projectile whose shape significantly deviates from the used reference projectile shape. Some ballistic software designers, who based their programs on the Siacci/Mayevski G1 model, give the user the possibility to enter several different G1 BC constants for different speed regimes to calculate ballistic predictions that closer match a bullets flight behaviour at longer ranges compared to calculations that use only one BC constant. The above example illustrates the central problem fixed drag curve models have. These models will only yield satisfactory accurate predictions as long as the projectile of interest has the same shape as the reference projectile or a shape that closely resembles the reference projectile. Any deviation from the reference projectile shape will result in less accurate predictions.
The Pejsa model is an analytic closed-form solution that does not use any tables or fixed drag curves generated for standard-shaped projectiles. The Pejsa method uses the G1-based ballistic coefficient as published, and incorporates this in a Pejsa retardation coefficient function in order to model the retardation behaviour of the specific projectile. Since it effectively uses an analytic function (drag coefficient modeled as a function of the Mach number) in order to match the drag behaviour of the specific bullet the Pesja method does not need to rely on any prefixed assumption. Besides the mathematical retardation coefficient function, the Pejsa model adds an extra slope constant factor that accounts for the more subtle change in retardation rate downrange of different bullet shapes and sizes. It ranges from 0.1 (flat-nose bullets) to 0.9 (very-low-drag bullets). If this deceleration constant factor is unknown a default value of 0.5 will predict the flight behaviour of most modern spitzer-type rifle bullets quite well. With the help of test firing measurements the slope constant for a particular bullet/rifle system/shooter combination can be determined. These test firings should preferably be executed at 60% and for extreme long range ballistic predictions also at 80% to 90% of the supersonic range of the projectiles of interest, staying away from erratic transonic effects. With this the Pejsa model can easily be tuned for the specific drag behaviour of a specific projectile, making significant better ballistic predictions for ranges beyond 500 m (547 yd) possible. Some software developers offer commercial software which is based on the Pejsa drag model enhanced and improved with refinements to account for normally minor effects (Coriolis, gyroscopic drift, etc.) that come in to play at long range. The developers of these enhanced Pejsa models designed these programs for ballistic predictions beyond 1,000 m (1,094 yd).
Doppler radar-measurements
For the precise establishment of drag or air resistance effects on projectiles, Doppler radarmeasurements are required. Weibel 1000e Doppler radars are used by governments, professional ballisticians, defense forces and a few ammunition manufacturers to obtain real world data of the flight behaviour of projectiles of their interest. Correctly established state of the art Doppler radar measurements can determine the flight behaviour of projectiles as small as airgun pellets in threedimensional space to within a few millimeters accuracy. The gathered data regarding the projectile deceleration can be derived and expressed in several ways, such as ballistic coefficients (BC) or drag coefficients (Cd).
Doppler radar measurement results for a lathe-turned monolithic solid .50 BMG very-low-drag bullet (Lost River J40 .510-773 grain monolithic solid bullet / twist rate 1:15 in) look like this:
Mach 0.000 0.400 0.500 0.600 0.700 0.800 0.825 0.850 0.875 0.900 0.925 0.950 0.975 1.000 number Drag 0.230 0.229 0.200 0.171 0.164 0.144 0.141 0.137 0.137 0.142 0.154 0.177 0.236 0.306 coeff. Range 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 (m) Ballisti 1.04 1.05 1.05 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.05 1.05 1.04 1.03 c coeff. 0 1 7 3 4 7 8 8 8 6 4 0 6 0 2 2 The initial rise in the BC value is attributed to a projectile's always present yaw and precession out of the bore. The test results were obtained from many shots not just a single shot. The bullet was assigned 1.062 for its BC number by the bullet's manufacturer Lost River Ballistic Technologies.
Doppler radar measurement results for a Lapua GB528 Scenar 19.44 g (300 gr) 8.59 mm (0.338 in) caliber very-low-drag bullet look like this:
Mach 1.025 1.050 1.075 1.100 1.150 1.200 1.300 1.400 1.500 1.600 1.800 2.000 number Drag 0.334 0.341 0.345 0.347 0.348 0.348 0.343 0.336 0.328 0.321 0.304 0.292 coeff.
This tested bullet experiences its maximum drag coefficient when entering the transonic flight regime around Mach 1.200.
further reduces drag. Cannelures, which are recessed rings around the bullet used to crimp the bullet securely into the case, will cause an increase in drag.
Authorities and projectile manufacturers are generally reluctant to share the results of Doppler radar tests and the test derived drag coefficients (Cd) of projectiles with the general public. In January 2009 the Finnish ammunition manufacturer Lapua published Doppler radar test-derived drag coefficient data for most of their rifle projectiles. With this Cd data engineers can create algorithms that utilize both known mathematical ballistic models as well as test specific, tabular data in unison. When used by predicative software like QuickTARGET Unlimited, Lapua Edition this data can be used for more accurate external ballistic predictions. Some of the Lapua-provided drag coefficient data shows drastic increases in the measured drag around or below the Mach 1 flight velocity region. This behaviour was observed for most of the measured small calibre bullets, and not so much for the larger calibre bullets. This implies some (mostly smaller caliber) rifle bullets exhibited coning and/or tumbling in the transonic/subsonic flight velocity regime. The information regarding unfavourable transonic/subsonic flight behaviour for some of the tested projectiles is important. This is a limiting factor for extended range shooting use, because the effects of coning and tumbling are not easily predictable and potentially catastrophic for the best ballistic prediction models and software. Presented Cd data can not be simply used for every gun-ammunition combination, since it was measured for the barrels, rotational (spin) velocities and ammunition lots the Lapua testers used during their test firings. Variables like differences in rifling, twist rates and/or muzzle velocities impart different rotational (spin) velocities and rifling marks on projectiles. Changes in such variables and projectile production lot variations can yield different downrange interaction with the air the projectile passes through that can result in (minor) changes in flight behaviour. This particular field of external ballistics is currently (2009) not elaborately studied nor well understood.
Range (m)
300 711
600 604
900 507
1,200 1,500 1,800 2,100 2,400 422 349 311 288 267
2,700 247
3,000 227
Radar test derived drag coefficients method V 830 (m/s) Time of flight (s) Total drop (m)
0.0000 0.3918 0.8507 1.3937 2.0435 2.8276 3.7480 4.7522 5.8354 7.0095 8.2909 0.000 0.715 3.203 8.146 16.571 30.035 50.715 80.529 121.023 173.998 241.735
G1 drag model method V 830 (m/s) Time of flight (s) Total drop (m)
718
615
522
440
374
328
299
278
261
248
0.0000 0.3897 0.8423 1.3732 2.0009 2.7427 3.6029 4.5642 5.6086 6.7276 7.9183 0.000 0.710 3.157 7.971 16.073 28.779 47.810 75.205 112.136 160.739 222.430 712 603 504 413 339 297 270 247 227 208
Pejsa drag model method 830 V (m/s) Time of flight (s) Total drop (m)
0.0000 0.3902 0.8479 1.3921 2.0501 2.8556 3.8057 4.8682 6.0294 7.2958 8.6769 0.000 0.719 3.198 8.129 16.580 30.271 51.582 82.873 126.870 185.318 260.968 713 606 508 418 339 303 283 265 249 235
G7 drag model method V 830 (m/s) Time of flight (s) Total drop (m)
0.0000 0.3912 0.8487 1.3901 2.0415 2.8404 3.7850 4.8110 5.9099 7.0838 8.3369 0.000 0.714 3.191 8.109 16.503 30.039 51.165 81.863 123.639 178.082 246.968
The table shows that the traditional Siacci/Mayevski G1 drag curve model prediction method generally yields more optimistic results compared to the modern Doppler radar test derived drag coefficients (Cd) prediction method. At 300 m (328 yd) range the differences will be hardly noticeable, but at 600 m (656 yd) and beyond the differences grow over 10 m/s (32.8 ft/s) projectile velocity and gradually become significant. At 1,500 m (1,640 yd) range the projectile velocity predictions deviate 25 m/s (82.0 ft/s), which equates to a predicted total drop difference of 125.6 cm (49.4 in) or 0.83 mrad (2.87 MOA) at 50 latitude. The Pejsa drag analytic closed-form solution prediction method, without slope constant factor fine tuning, yields very similar results in the supersonic flight regime compared to the Doppler radar test derived drag coefficients (Cd) prediction method. At 1,500 m (1,640 yd) range the projectile velocity predictions deviate 10 m/s (32.8 ft/s), which equates to a predicted total drop difference of 23.6 cm (9.3 in) or 0.16 mrad (0.54 MOA) at 50 latitude. The G7 drag curve model prediction method (recommended by some manufacturers for very-lowdrag shaped rifle bullets) when using a G7 ballistic coefficient (BC) of 0.377 yields very similar results in the supersonic flight regime compared to the Doppler radar test derived drag coefficients (C d) prediction method. At 1,500 m (1,640 yd) range the projectile velocity predictions have their maximum deviation of 10 m/s (32.8 ft/s). The predicted total drop difference at 1,500 m (1,640 yd) is 0.4 cm (0.16 in) at 50 latitude. The predicted total drop difference at 1,800 m (1,969 yd) is 45.0 cm (17.7 in), which equates to 0.25 mrad (0.86 MOA).
External factors
Wind
Wind has a range of effects, the first being the effect of making the bullet deviate to the side. From a scientific perspective, the "wind pushing on the side of the bullet" is not what causes wind drift. What causes wind drift is drag. Drag makes the bullet turn into the wind, keeping the centre of air pressure
on its nose. This causes the nose to be cocked (from your perspective) into the wind, the base is cocked (from your perspective) "downwind." So, (again from your perspective), the drag is pushing the bullet downwind making bullets follow the wind. A somewhat less obvious effect is caused by head or tailwinds. A headwind will slightly increase the relative velocity of the projectile, and increase drag and the corresponding drop. A tailwind will reduce the drag and the bullet drop. In the real world pure head or tailwinds are rare, since wind seldom is constant in force and direction and normally interacts with the terrain it is blowing over. This often makes ultra long range shooting in head or tailwind conditions difficult.
Vertical angles
The vertical angle (or elevation) of a shot will also affect the trajectory of the shot. Ballistic tables for small caliber projectiles (fired from pistols or rifles) assume that gravity is acting nearly perpendicular to the bullet path. If the angle is up or down, then the perpendicular acceleration will actually be less. The effect of the path wise acceleration component will be negligible, so shooting up or downhill will both result in a similar decrease in bullet drop. Often mathematical ballistic prediction models are limited to "flat fire" scenario's based on the rifleman's rule, meaning they can not produce adequately accurate predictions when combined with steep elevation angles over -15 to 15 degrees and longer ranges. There are however several mathematical prediction models for inclined fire scenario's available which yield rather varying accuracy expectation levels.
means that the bullet is "skidding" sideways at any given moment, and thus experiencing a sideways component.
Projectile or bullet length: longer projectiles experience more gyroscopic drift because they produce more lateral "lift" for a given yaw angle. Spin rate: faster spin rates will produce more gyroscopic drift because the nose ends up pointing farther to the side. Range, time of flight and trajectory height: gyroscopic drift increases with all of these variables.
Doppler radar measurement results for the gyroscopic drift of several US military and other very-lowdrag bullets at 1000 yards (914.4 m) look like this:
US military US military M118 Special M193 Ball Ball
Bullet type
Sierra MatchKing
55 gr
173 gr
155 gr
190 gr
220 gr
300 gr
350 gr
419 gr
.308 in / 7.62 mm
.308 in / 7.62 mm
.308 in / 7.62 mm
.308 in / 7.62 mm
.338 in / 8.59 mm
.375 in / 9.53 mm
.408 in / 10.36 mm
11.50 in / 292 mm
12.75 in / 324 mm
3.00 in / 76 mm
7.75 in / 197 mm
6.5 in / 165 mm
0.87 in / 22 mm
1.90 in / 48 mm
The table shows that the gyroscopic drift is rather variable and no clear trend is easily distinguishable.
Magnus effect
Spin stabilized projectiles are affected by the Magnus effect, whereby the spin of the bullet creates a force acting either up or down, perpendicular to the sideways vector of the wind. In the simple case of horizontal wind, and a right hand (clockwise) direction of rotation, the Magnus effect induced pressure differences around the bullet cause a downward force to act on the projectile, affecting its point of impact. The vertical deflection value tends to be small in comparison with the horizontal wind induced deflection component, but it may nevertheless be significant in winds that exceed 4 m/s (14.4 km/h or 9 mph).
Poisson effect
Another minor cause of drift, which depends on the nose of the projectile being above the trajectory, is the Poisson Effect. This, if it occurs at all, acts in the same direction as the gyroscopic drift and is even less important than the Magnus effect. It supposes that the uptilted nose of the projectile causes an air cushion to build up underneath it. It further supposes that there is an increase of friction between this cushion and the projectile so that the latter, with its spin, will tend to roll off the cushion and move sideways. This simple explanation is quite popular. There is, however, no evidence to show that increased pressure means increased friction and unless this is so, there can be no effect. Even if it does exist it must be quite insignificant compared with the gyroscopic and Coriolis drifts. Both the Poisson and Magnus Effects will reverse their directions of drift if the nose falls below the trajectory. When the nose is off to one side, as in equilibrium yaw, these effects will make minute alterations in range.
Coriolis drift
Coriolis drift is caused by the Coriolis effect and the Etvs effect. These effects cause drift related to the spin of the Earth, known as Coriolis drift. Coriolis drift can be up, down, left or right. Coriolis drift is not an aerodynamic effect. It is a result of flying from one point to another across the surface of a rotating planet (Earth). The direction of Coriolis drift depends on the firer's and target's location or latitude on the planet Earth, and the azimuth of firing. The magnitude of the drift depends on the firing and target location, azimuth, and time of flight.
Coriolis effect
The Coriolis effect is interrelated with or an aspect of the Etvs effect and causes subtle trajectory variations caused by a rotating reference frame. The coordinate system that is used to specify the
location of the point of firing and the location of the target is the system of latitudes and longitudes, which is in fact a rotating coordinate system, since the planet Earth is a rotating sphere. During its flight, the projectile moves in a straight line (not counting gravitation and air resistance for now). Since the target is co-rotating with the Earth, it is in fact a moving target, relative to the projectile, so in order to hit it the gun must be aimed to the point where the projectile and the target will arrive simultaneously. When the straight path of the projectile is plotted in the rotating coordinate system that is used, then this path appears as curvilinear. The fact that the coordinate system is rotating must be taken into account, and this is achieved by adding terms for a "centrifugal force" and a "Coriolis effect" to the equations of motion. When the appropriate Coriolis term is added to the equation of motion the predicted path with respect to the rotating coordinate system is curvilinear, corresponding to the actual straight line motion of the projectile. For an observer with his frame of reference in the northern hemisphere Coriolis makes the projectile appear to curve over to the right. Actually it is not the projectile swinging to the right but the earth (frame of reference) rotating to the left which produces this result. The opposite will seem to happen in the southern hemisphere. The Coriolis effect is at its maximum at the poles and negligible at the equator of the Earth. The reason for this is that the Coriolis effect depends on the vector of the angular velocity of the Earth's rotation with respect to xyz - coordinate system (frame of reference). For small arms, the Coriolis effect is generally insignificant, but for ballistic projectiles with long flight times, such as extreme long-range rifle projectiles, artillery and intercontinental ballistic missiles, it is a significant factor in calculating the trajectory.
Etvs effect
The Etvs effect is interrelated with or an aspect of the Coriolis effect and causes subtle trajectory variations caused by the Earth's rotation. It is not an aerodynamic effect and latitude dependent, being at its most significant at equatorial latitude. Eastward-traveling objects will be deflected upwards (feel lighter), while westward-traveling objects will be deflected downwards (feel heavier). In addition, objects traveling upwards or downwards will be deflected to the west or east respectively. The principle behind these counterintuitive projectile weight i.e. gravitational pull variations during flight are explained in more detail in the equivalence principle article dealing with the physics of general relativity. For small arms, the Etvs effect is generally insignificant, but for long range ballistic projectiles with long flight times it can become a significant factor in accurately calculating the trajectory.
Equipment factors
Though not forces acting on projectile trajectories there are some equipment related factors that influence trajectories. Since these factors can cause otherwise unexplainable external ballistic flight behaviour they have to be briefly mentioned. Lateral jump Lateral jump is caused by a slight lateral and rotational movement of a gun barrel at the instant of firing. It has the effect of a small error in bearing. The effect is ignored, since it is small and varies from round to round.
Lateral throw-off Lateral throw-off is caused by mass imbalance in applied spin stabilized projectiles or pressure imbalances during the transitorily flight phase when a projectile leaves a gun barrel. If present it causes dispersion. The effect is unpredictable, since it is generally small and varies from projectile to projectile, round to round and/or gun barrel to gun barrel.
Ballistic Coefficient of the bullets used Height of the sighting components above the rifle bore axis The Zero Range at which the sighting components and rifle combination were sighted in Bullet Weight Actual Muzzle Velocity (powder temperature affects muzzle velocity, primer ignition is also temperature dependent) Target Range Supersonic range of the employed gun, cartridge and bullet combination Inclination Angle in case of uphill/downhill firing Target speed and direction Wind Speed and Direction (main cause for horizontal projectile deflection and generally the hardest ballistic variable to measure and judge correctly. Wind effects can also cause vertical deflection.) Air temperature, pressure, altitude and humidity variations (these make up the ambient air density) Earth's gravity (changes slightly with Latitude and Altitude) Gyroscopic Drift (horizontal and vertical plane gyroscopic effect often known as Spin Drift induced by the barrels twist direction and twist rate) Coriolis effect drift (latitude, direction of fire and northern or southern hemisphere data dictate this effect)
Etvs effect (interrelated with the Coriolis effect, latitude and direction of fire dictate this effect) Lateral throw-off (dispersion that is caused by mass imbalance in the applied projectile) Aerodynamic jump (dispersion that is caused by lateral (wind) impulses activated during free flight at or very near the muzzle) The inherent potential accuracy and adjustment range of the sighting components The inherent potential accuracy of the rifle The inherent potential accuracy of the ammunition The inherent potential accuracy of the computer program and other firing control components used to calculate the trajectory
The ambient air density is at its maximum at Arctic sea level conditions. Cold gunpowder also produces lower pressures and hence lower muzzle velocities than warm powder. This means that the maximum practical range of rifles will be at it shortest at Arctic sea level conditions. The ability to hit a point target at great range has a lot to do with the ability to tackle environmental and meteorological factors and a good understanding of exterior ballistics and the limitations of equipment. Without (computer) support and highly accurate laser rangefinders and meteorological measuring equipment as aids to determine ballistic solutions, long-range shooting beyond 1000 m (1100 yd) at unknown ranges becomes guesswork for even the most expert long-range marksmen.
0 2700 823
Velocity
Zeroed for 200 yards (184 m) Height in mm -1.5 -38 2.0 51 0 0 -8.4 -213 -24.3 -617 -49.0 -1245
Zeroed for 300 yards (274 m) Height in -1.5 4.8 5.6 0 -13.1 -35.0
mm
-38
122
142
-333
-889
This table demonstrates that, even with a fairly aerodynamic bullet fired at high velocity, the " bullet drop" or change in the point of impact is significant. This change in point of impact has two important implications; Firstly, estimating the distance to the target is critical at longer ranges, because the difference in the point of impact between 400 and 500 yd (460 m) is 2532in (depending on zero), in other words if the shooter estimates that the target is 400yards away when it is in fact 500yards away the shot will impact 2532in (635813mm) below where it was aimed, possibly missing the target completely. Secondly, the rifle should be zeroed to a distance appropriate to the typical range of targets, because the shooter might have to aim so far above the target to compensate for a large bullet drop that he may lose sight of the target completely (for instance being outside the field of view of a telescopic sight). In the example of the rifle zeroed at 200 yd (180 m), the shooter would have to aim 49in or more than 4ft (1.2m) above the point of impact for a target at 500yd.