Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
qxd
8/21/07
1:48 PM
Page 1
Crawler unit:
. . .
Driving unit:
Engine: Performance: Number of cylinders: Cooling system: CAT C11 385 hp 6 cylinders in line water, circulation with pump
29.5 6 5 hydraulic
Remote control:
The system consists of a receiving set which is mounted on the machine, a wireless transmitting set with two accumulators and a charging unit. With the radio control unit the crawler unit and the vibration chute can be moved.
Dimensions:
Working dimensions: Length: Width: Height: Transport dimensions: Length: Width: Height: Weight: 42 19 1 10 7
. .
42 8 4 10 7 approximately 34 t 74,957 lb
Transport dimensions
w w w. m i l t o n c a t . c o m
All information in this publication is based on the latest product development information which is available at time of printing. Hartl Anlagenbau GmbH reserve all rights on changes at any time and without advance notice, without undertaking any obligation. No part of this publication can be reproduced without written grant of HARTL Anlagenbau GmbH. Last modication: 9-2007
Hopkinton, NH 603-746-4611
Richmond, VT 802-434-4228
Scarborough, ME 207-883-9586
Brewer, ME 207-989-1890
Milford, MA 508-634-3400
Wareham, MA 508-291-1200
Cranston, RI 401-946-6350
MChartlesheets.1270.qxd
8/21/07
1:48 PM
Page 4
< Impact Crusher PC 1270 Inlet opening: Diameter of rotor: Width of rotor: Rotor equipment: Crushing grade: Gap adjustment: Crushing capacity: Rotorevoulution: 49 x 28 39.7 47.2 4 pcs. hammer 1:10 1:50 hydraulic up to 250 t/h 780 min-1
< Feedhopper Construction: Charging volume: Charging length: Charging width: Charging height: Hardox steel appr. 4.5 m 10 11 7 9 10 7
< Main conveyor belt Construction: Belt width: Discharge height: Drive: sectional steel construction 47.2 9 2 hydraulic
< Crawler unit Track chain width: Wheelbase: Design: Climbing ability: Drive: 15 10 1 3-rib bottom plates max. 20 hydraulic
< Vibrating chute with pre-screening Length without rost: Width: Length of rost: Drive: Standard equipment: 8 2 4 1 36 hydraulic
< Permanent magnetic separator Belt width: Wheelbase: Drive: 29.5 6 5 hydraulic
The impact crusher is a high powered machine with a very very high crushing grade. The installed hammers can be chosen individually depending on the type of crushing material, so you can reach the best output with the least amount of wearing. The hammers can be used on both sides. Applications: Crushing of rocks, concrete, rubble, asphalt, wood...
Straight grid:
2 or
Crawler unit
Zig-Zag grid:
2 < Remote control The system consists of a receiving set which is mounted on the machine, a wireless transmitting set with two accumulators and a charging unit. With the remote control unit the crawler unit and the vibration chute can be moved.
< Side conveyor belt Construction: Belt width: Discharge height: Drive: sectional steel construction 25.5 8 7 hydraulic
< Driving unit Engine: Performance: Number of cylinders: Cooling system: CAT C11 385 hp 6 cylinders in line water, circulation with pump
In the vibrating chute, pre-screening is integrated. The prescreened material from the vibrating chute can be discharged to the main conveyor belt or can be dumped with the side conveyor belt of there is one mounted.
The impact crusher is driven directly with v-belts from the engine. All other drives, e.g. for the conveyor belts and the crawler unit, work hydraulically. The central hydraulic pump is close coupled to the engine.