Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Handheld XRF
S1 SORTER
The S1 SORTER
A tough performer
The S1 SORTERs state-of-the-art technology is protected by a very tough shell. Its designed to be used out in the field, in temperatures ranging from -10C to +50C. It can be used to measure samples up to 500C. The case is made of industrial-strength plastic, and the holster allows you to work hands-free even when climbing service racks.
Alloy Verification
Petrochemical
When it comes to Positive Material Identification (PMI), the S1 SORTER provides a fast, easy and completely non-destructive analysis method for every metal component. Within the petrochemical industry, that can apply to everything from a single component up to miles of pipeline. This is particularly important in an industry where the use of precise alloy components is critical to plant safety. Many component failures have been traced to the installation of the wrong metals, which then leads to faster corrosion rates, or directly to an outage or explosion.
Fabrication
Alloy Verification is exactly the same principle applied to the fabrication process, where alloy verification is a required part of Quality Assurance. In fact 100% alloy verification is now a common part of ISO9000 certification for many fabricators. This is especially the case when the parts in question are designed for use in petrochemical applications, or anything else that requires high temperature and pressure. Getting the verification right at an early stage prevents any possibility of a costly alloy mix-up, dramatically reducing scrap and improving product quality. Again, the S1 SORTER makes for a straightforward, cost-effective solution.
Application
Scrap
Scrap
Sorting scrap used to be the job of experienced metal sorters, but that has all changed since the introduction of handheld XRF technology. The S1 SORTER provides a fast, reliable way of separating the valuable content of scrap and the ability to identify unwanted or tramp elements without the need for highly-trained operators. The size of the sample isnt a problem the analyzer can measure everything from single wires up to big heat-exchangers and other large structures. Its a simple case of point-and-shoot.
Empirical calibrations
With accuracy and ease of use in mind, the S1 SORTER is calibrated using certified reference materials for all the most common alloys. This allows for fast and reliable analysis of alloys within the calibration range. In addition an optional Fundamental Parameters (FP) calibration is available for the occasional sample which falls outside of the range of the standard calibration.
Grade identification
The S1 SORTER provides a unique display which compares the measured assay with the defined grade limits giving you instant grade identification and indicating where out of spec elements exist. This allows even unskilled operators to understand the materials being measured. The S1 SORTER also comes with an extensive grade library.
Radiation safety
Its worth noting that the S1 SORTER contains zero radioactive material, which means much easier registration requirements, safe transportation, no disposal restrictions1 and no need for a wipe test every six months. For extra security, the system also comes in a lockable case and is password protected. A low count rate sensor checks that the sample is correctly in place before x-rays are generated and a cover is supplied to minimize x-ray exposure when measuring small parts. Finally, the inclusion of safety straps means theres much less chance of dropping or damaging the unit.
1. No restrictions related to radioactive material disposal, however, local WEEE restrictions may apply.
Specifications
Module Weight Dimensions Excitation Source Detector Operating Software Power Display Standard Calibrations
S1 SORTER 2 kg (4.49 lbs) with batteries, 1.77kg (3.9 lbs) base weight 30cm(L) x 10cm(W) x 28cm(H) X-ray tube with Ag target; max voltage 40 kV SiPIN diode Microsoft Windows Mobile 5.0 for Pocket PC Bruker Elemental proprietary software 2 rechargeable Li-ion batteries 240 x 320; 65,536 colors; back lit; touch screen Tool Steel, Stainless Steel, Carbon and Low Alloy Steels, Cobalt, Nickel and Copper Alloys Aluminum and Titanium alloys (heavy alloying elements), Precious Metal Alloys, Fundamental Parameters calibration ActiveSync via USB or wireless Bluetooth; Memory Card 256 MB standard PDA memory, 512 MB Memory Card allows for storage of thousands of spectra and millions of results; larger memory cards available Measure samples at temperatures up to 500C Password protected, No sample (backscatter) shutoff -10C to 50C English, Chinese, Korean, Japanese, Russian, German, Italian, French, Dutch, Polish, Spanish, Spanish (Mexican), Portuguese Orange, grey CE, cTVus, IEC 61010-1:2002 by TV SD
Optional calibrations
Data Transfer
Data Storage
Bruker has been in this business for many years and we understand the critical importance of post-sales service to our clients. Thats why we not only design our products with maximum uptime in mind we provide a two year warranty on our products2. We will provide exceptional service on your instrument from a service center close to you.
We are a company with global scale and presence. Our support staff are based in offices throughout the world, so knowledgeable and comprehensive service is always close at hand. When it comes to service contracts and warranties, we offer the kind of flexibility and coverage that others find hard to match. At any time during your two-year warranty period, you can decide to add extended coverage, either on an annual basis or through a discounted package of coverage for three years. Just let us know what works for you.
Americas Bruker Elemental Sales Billerica, MA USA Tel. +1 (978) 663-3660 x1463 hhsales@bruker-elemental.net
Europe / Middle East / Africa Bruker Nano GmBH Sales/Service Berlin Germany Tel. +49 (0)30 670 990-0 info-hh@bruker-elemental.com
Bruker Elemental is continually improving its products and reserves the right to change
www.bruker.com/hhxrf