Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Living
Outside
Play
Technology
Workshop
http://www.instructables.com/id/Tabletop-LED-Lamp/
Image Notes 1. this is the LED i used but you can use any type. (Ultra bright fro best effect) 2. Just some of the materials you will need.
Image Notes 1. Bottom of the lamp 2. Optional thread to make it look better
http://www.instructables.com/id/Tabletop-LED-Lamp/
Step 2: Tower
Get a piece of PVC or any type of tubing and cut it to the desired length (I cut mine to roughly 1.5"). Once that is done spray paint it any color you like. then super glue it to the bottom of the lamp. Before that remember to attach the wires to the lamp and solder them in place (Believe me it'll save you sometime if you do that first).
Image Notes 1. solder the leads first then super glue the piping to that lamp 2. wire to the lamp from the swtch
http://www.instructables.com/id/Tabletop-LED-Lamp/
Image Notes 1. leads soldered to the switch 2. tuck excess wire into tube
http://www.instructables.com/id/Tabletop-LED-Lamp/
Related Instructables
http://www.instructables.com/id/Tabletop-LED-Lamp/