Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
com
2012
LG AIR CONDITIONERS Accessories
LG Electronics AE Company, Commercial Air Conditioning
20 Yeouido-dong, Yeongdeungpo-gu, Yeouido P.O.Box 335 Seoul, 150-721, Korea. Phone : +82-2-3777-7934 Fax : +82-2-3777-3099 www.lg.com www.lgeaircon.com
Copyright 2012 LG Electronics. All rights reserved.
Distributed by
GREENOVATION
Reducing greenhouse gas emissions, enhancing green growth with suppliers, developing new green businesses.
Green Vision
Green Strategy
Green Management
Green Product Expert Committee Green Marketing Council
Green Businesses
Secure future green growth drivers in energy, water treatment and environmental businesses
Solar Business Water Treatment Business Smart Grids Business
Solar Business
co2 co2
co2
LG Electronics vision is to grow into a leading environmentally conscious company by working to protect the global environment and creating products with environmentally friendly features.
Smart Grids Business Water Treatment Business LG Electronics has established a lowcarbon green management system to provide low carbon value to customers through voluntary greenhouse gas (GHG) reduction. Throughout its activities, LGE is creating value for customers and stakeholders, and protecting the natural environment.
Productivity enhancement Low-Carbon Factories Product competitiveness No longer Low-Carbon Products operations Operational at efficiencies full load Low-Carbon Value Chain Social contribution Low-Carbon Culture
Integrates operations at partial load
Eco-Design Committee
Chairman : CTO Members : Head of Research Center (Executives)
Were in the business of creating comfort for any season of the year through Heating, Ventilation and Air-Conditioning solutions. LGE provides a total HVAC system with optimized heating, ventilation and air-conditioning solutions carefully adapted to the unique conditions of each site during the buildings construction or renovation. The company is also engaging in the development of green buildings through its line of products using renewable energy. For example, our Multi V Water uses geothermal energy, which is known as a constant source of heating and cooling that maintains a temperature of 155C regardless of the surface temperature.
Summer (Cooling)
Major decisions in green management at LGE are made by the Eco-Design Committee; comprised of the heads of laboratories under the CTO, and supported 80 by the Green Product Expert Committee, 70 consisting of members working on R&D 60 and management of green products, and 50 the Green Marketing Council, in which 40 division marketing managers set-up green 30 marketing strategies.
Maximum Sound Power Level in dB
20 10 0
Winter (Heating)
Heat the air thanks to Multi V Water and a heat exchanger in the ground
Multi V Water
HVAC HVAC
Cool the air thanks to Multi V Water and a heat exchanger in the ground
Green Goals
Our green management activities include greenhouse gas reduction across the entire production process, enhancing Several rating green and shared growth with suppliers, temperature and developing green businesses to co2 new growth opportunities. secure For cooling 1 region
to calculate SEER For heating 3 regions to calculate SCOP* Reference design conditions supplied by Reg To reect performance over entire season
Cooled air
Heated air
Heat Exchanger
EU Eco design
LG Electronics
LG Electronics
GREENER PRODUCTS
LGEs Green Product Strategy aims at minimizing the environmental load in every stage of the product lifecycle and improving energy, resources and humanity through production of highly energy-efficient products, reduction of raw material usage, and improvement of living environments for everyone.
co2
H
an um
Res ou
Green Product
Recyclability Improvement
E n e rg y
Home Environment
co2
co2
Prize-Winning Technologies
Energy-saving, High-efficiency Inverter Compressor and Motion Sensor This super energy-saving inverter compressor technology saves up to 72% of electricity by automatically controlling the unit according to the indoor temperature and a motion sensor. High-efficiency Central Air Conditioning System Using eco design for every part of the product has improved the energy efficiency of this air conditioning system. It features the worlds first heat exchanger, providing continuous heating, as well as Koreas first high-efficiency, high-pressure inverter compressor. High-performance, High-efficiency Inverter Heat Pump Air Conditioner These compact outdoor units feature enhanced heating and cooling technology, low-noise indoor unit technology and a highly efficient inverter heat pump, with up to 115% improvement on cost effectiveness in comparison to constant-speed air conditioners. Geothermal Air Conditioner and Heater Using reusable geothermal energy to reduce greenhouse gas emissions, this high-efficiency DC Inverter technology allows uninterrupted flow of the magnetic field within the motor of the compressor in the outdoor unit. Hybrid solar air conditioner This product incorporates the energy efficiency enhancement of a power saving inverter and allows for a 100% solar powered air purifier function as well as a 15% solar powered cooling function, a Human Care Robot, and Green-tea HEPA and Platinoid enzyme filters.
Energy
Energy-Focusing on two key areas: improving energy efciency and reducing greenhouse gas emissions from the manufacturing process.
Resources
Resources-committed to strategies of lowering resource usage in products and improving product recyclability.
Humanity
Humanity-Providing green value to customers
Green Technologies
LGE has been conducting R&D to reduce the environmental impact of products, developing a range of highly efficient products, replacing hazardous substances in products, improving product design to facilitate recycling, and establishing an infrastructure to enable the development of green products and technologies.
OUR AIR-CONDITIONERS MAKE THE MOST OF THE ENERGY THEY ARE USING
Solar Business Lighting Solutions Business HVAC Business Smart Grids Business
Eco-Design Committee
Chairman : CTO Members : Head of Research Center (Executives)
Energy Label
Green Product Green Marketing LG Electronics products display their energy credentials on the standardized energy Expert label, a transparent and easy to compare tool. An Committee Council arrow indicates which energy class your product belongs Solar in on a scale from A to G. The higher the class, the less energy-hungry your Business product is at delivering heating or cooling.The label will also give you Business an estimate of Eco the products annual energy consumption in kW. Lighting Solutions Strategy T eam
LG Electronics has improved its products design so that they consume less energy while satisfying all your cooling and heating needs. Eco Strategy T eam
HVAC Business
The rule of 20
Chairman : CTO manufacturers to produce energy efficient products that consume Members : Head of scarce Research Center (Executives) less raw materials and energy from production to final use.
Thermostant off Integrates operations at partial load Stand by mode Off mode Crankcase heater
The 20/20/20 by 2020 policy aims to ensure 20% less primary energy consumption and 20% less greenhouse gas emissions, while the share of renewable energies increases by 20% by 2020. LG Electronics air conditioners integrate these expectations and contribute their fair share in global climate protection.
Maximum Sound Power Level in dB
EU Eco design
For split air conditioners below 12 kW that provide both heating and cooling, the energy label will indicate two energy classes-one for heating and one for cooling. Also displayed are capacity in kW, annual energy consumption and LG Electronics the seasonal performance ratio for Several rating heating and cooling.
temperatures
For cooling region to calculate SEER
For single ducts below 12 kW the same information is displayed, with some adjustments: Single ducts indicate the hourly energy consumption in kW whereas double ducts indicate the yearly annual consumption in kW. Finally, performances of single and Includes energy No longer double ducts in heating and/or consumption in cooling operations auxiliary modes full load mode at are still subject to nominal calculations, not seasonal.
Thermostant off Stand by mode Off mode Crankcase heater Integrates operations at partial load
80 70 60 50 40 30 20 10 0
80
For heating 3 regions to calculate SEER Reference design conditions supplied by Reg to reect performance over entire season
EU Eco design
LG Electronics
LG Electronics deploys products with environmentally-friendly 50 features both in heating and cooling modes that go beyond 40 the minimum requirements set by European legislation. With a 30 rating of close to 4, LG Electronics products make the most of the energy 20they are using. No energy is wasted, while we help you decrease your energy bills - all year long.
10 0
60
LG Electronics
With different cooling and heating needs throughout the year, LGEs products are designed for optimal performance according to each season and geographical area. The Seasonal Energy Energy Efficiency Efciency Ratio and the Seasonal Coefficient of Performance Class illustrate best how each product will operate in heating and/ or cooling mode depending on where you live and on the basis of real-life use conditions: Seasonal efficiency integrates the auxiliary modes of operation of the product, where energy use is still necessary. Calculations are simulated under different combinations of indoor and outdoor average temperatures over all seasons corresponding to one out the three Europe climate zones. LG products improve the indoor environment and save energy in a cost efficient way.
SEER SEER8.5 6.1SEER<8.5 5.6SEER<6.1 5.1SEER<5.6 4.6SEER<5.1 4.1SEER<4.6 3.6SEER<4.1 3.1SEER<3.6 2.6SEER<3.1 SEER<2.6
SCOP SCOP8.5 4.6SCOP<5.1 4.0SCOP<4.6 3.4SCOP<4.0 3.1SCOP<3.4 2.8SCOP<3.1 2.5SCOP<2.8 2.2SCOP<2.5 1.9SCOP<2.2 SCOP1.9
EER EER4.1 3.6EER<4.1 3.1EER<3.6 2.6EER<3.1 2.4EER<2.6 2.1EER<2.4 1.8EER<2.1 1.6EER<1.8 1.4EER<1.6 EER<1.4
COP COP8.5 3.1COP<3.6 2.6COP<3.1 2.3COP<2.6 2.0COP<2.3 1.8COP<2.0 1.6COP<1.8 1.4COP<1.6 1.2COP<1.4 COP<1.2 A B C D E F G EER>3.20 3.20EER>3.00 3.00EER>2.80 2.80EER>2.60 2.60EER>2.40 2.40EER>2.20 2.20EER EER>3.20 3.20EER>3.00 3.00EER>2.80 2.80EER>2.60 2.60EER>2.40 2.40EER>2.20 2.20EER COP>3.60 3.60COP>3.40 3.40COP>3.20 3.20COP>2.80 2.80COP>2.60 2.60COP>2.40 2.40COP A B C D E F G COP>3.60 3.60COP>3.40 3.40COP>3.20 3.20COP>2.80 2.80COP>2.60 2.60COP>2.40 2.40COP
A+++ A++ A+ A B C D E F G
seer
A+++ A++ A+ A B C D E F G
eer
VRF Certification
LG Electronics is involved in a cross-industry evaluation whereby the performance of the outdoor units of VRF systems is voluntarily measured and rated. Committed to producing energy efficient products, LG Electronics has supported this initiative since its start. The standard, coordinated by Eurovent, will allow the energy efficiency of the product to be displayed in heating and cooling mode and allow side-by-side comparison with competing products. In the end, the user can make the most informed choice when purchasing an LG Electronics product, from both an environmental and a pricing point of view.
LG Electronics supplies equipment that is being noticed for its design and performance and not for its noise. The sound power of our units in dB are displayed in the energy label for both indoor and outdoor units, in conformity with limit values that are set by European Regulations. LG Electronics is actually doing its best for reducing noise levels of its equipment. We bring to our customers products that emit 30 % less noise than required by European law.
Contents
12 V -net
13 18 35
Remote Controller
Central Controller
Central Controller
Electronic Accessory
V-net
Simple Controller
PDI, Dry Contact, Variable Water Flow Control Kit, Independent Power Module, CO2 Sensor,
Standard
Deluxe
Simple
PQWRHDF0
PQCSZ250S0
AC EZ
PQCSW320A1E
AC Smart ll
PI 485
Group Control Wire, Zone Controller, Low Ambient Kit, CTI (Communication Transfer Interface)
Mechanical Accessory
PQRCVSL0
(White)
PQRCUDS0
PQRCVCL0Q
(Black/Simple)
PRLK048A0
EEV kit
PQNFP00T0 PQNFB17B0
(BACnet/Modbus)
DO Kit
PQRCVCL0QW
(White/Simple)
Control kit
PRCKD20E PRCKD40E
Expansion Kit
PQRCUDSOS
(Silver)
PQRCHCA0Q
PQCSE440U0
Expansion kit
PQRCHCA0QW
Piping Accessory
Remote Controller
14 15 16 17
V-net
Various types of remote controllers enable function control of LG Air Conditioning systems.
Mechanical Accessory
PQRCVSL0 PQRCVSL0QW On / Off Fan speed Temperature setting Mode change Auto swing Vane control(Louver direction) E.S.P function Reservation Timer Function Electric failure compensation Child lock
PQRCUDS0(B,S)
PQRCVCL0Q PQRCVCL0QW
PQRCHCA0Q PQRCHCA0QW
PQWRHDF0
Piping Accessory
12 /13
PQRCVSL0 / PQRCVSL0QW
Standard Wired Remote Controller
Providing easy control of one or a group of indoor units to various applications.
PQRCVSL0 (Black)
PQRCVSL0QW (White)
PQRCUDS0 (White)
PQRCUDS0B (Blue)
PQRCUDS0S (Silver)
FEATURES
PQRCUDS0 / PQRCUDS0B / PQRCUDS0S
Operating mode Touch screen / LCD back_light Room temp Fan / Plasma / Swirl / Heater Vane control(Louver direction) / Auto swing E.S.P function Reservation Timer function Child lock
Refer to each model PDB for applicable models. On/Off / Fan speed / Mode / Temp. Weekly / Simple
14 /15
PQWRHDF0
Wireless Remote Controller
Wireless control to operate air conditioners more conveniently. V-net
PQRCVCL0Q (Black/Simple)
PQRCVCL0QW (White/Simple)
FEATURES
PQRCVCL0Q / PQRCVCLOQW
Operation mode Room temp Child lock Mode change Back Light
On/Off / Fan speed / Mode / Temp. Cooling / Heating / Fan / Dehumidify / Auto
FEATURES
PQRCHCA0Q / PQRCHCA0QW
On/Off / Fan speed / Temp. Only changeable by central controller
PQWRHDF0
Operating mode Room temperature checking Chaos swing / Jet cool On/Off timer Sleep mode auto Main / Sub setting of indoor units (For override function)
Applicable for MULTI V II and III series. Refer to each model PDB for applicable models. On/Off / Fan speed / Mode / Temp
Compatible with SCAC models connected to wired remote controllers. Refer to each model PDB for applicable models.
Mechanical Accessory
COMBINATION
16 /17
Piping Accessory
Central Controller
19 20 22 26 27
PQCSZ250S0
AC EZ
In addition to On/Off control, more functions such as operation mode, fan speed, and scheduling can be run and monitored. V-net
AC EZ
BNU(LONWORKS)
BNU(BACnet / Modbus)
28
30
PI 485 / DO Kit
PQCSZ50S0
Max. Indoor unit to control Individual Control Lock function Mode change Schedule Ventilation control Display(All Indoor status indication) Dimension(mm) Power(V)
32 Indoor Units On/Off / Operation Mode / Fan Speed / Temp Central Cooling / Heating / Fan / Dehumidification / Auto 8 event schedule/day On/Off / Ventilation Mode / Rapid Ventilation Operation, Set temp, Room Temp, Schedule 190x120x17 DC 12V
Mechanical Accessory
PQCSZ250S0 On / Off Max. no. of indoor units Mode change Control of each room Total lock Error check Fan speed / Temperature control Schedule Ventilation control PDI Monitoring Web access Set temp. range restriction Auto Changeover Temperature limit control History Interlocking function Multi languages
Total On/Off control Individual Indoor On/Off control and LED Display Detailed Function control part Lock control
32(16/16)
64(128)
256
4,096
LED/LCD display
Self- diagnosis
Self- diagnosis
Self- diagnosis
COMBINATION
MULTI V III Heat Pump MULTI V III Heat Recovery MULTI V PLUS II MULTI V SYNC II MULTI V SPACE II
MULTI V Water II
Weeky
Weekly / Yearly
Weekly / Yearly
Weekly / Yearly
Piping Accessory
MULTI V MINI
(ARUN40GS2A needs PI 485)
PQCSZ250S0
PI 485
AC 220V
PMNFP14A0 (Max 16Indoors) PMNFP14A1 (Max 64Indoors) PI 485 AC 220V MULTI, Single A
PMNFP14A0 PI 485
ECO V
V-net
Easy Control
- Funtion Lock - Lock Schedule
Web Access
Mechanical Accessory
Screen Saver
Multi Language
- Automatic H/C Changeover - Temperature Limit - Temperature Range Restriction - Time Limit Control
Comfort Control
ECO V
DI RS485
Easy Software Upgrade by USB
USB Option Kit
PQNFP00T0
DO Kit
Light
Pump
Moter
etc
Operation Report
- Operating Time, Percentage, History
Emergency
LGAP
Remote Controller Restriction Automatic Setting A/C and Vent.
PDI Function
Emergency Interlock
- Forced Off
FEATURES
Schedule Wizard Function
Schedule pattern wizard is the process of configuring the operation of the unit in weekly or daily pattern. The pattern created through the schedule pattern wizard can be applied to the group as a schedule through schedule wizard to be described in the next section.
Piping Accessory
20 /21
COMBINATION
V-net
MULTI V III Heat Pump MULTI V III Heat Recovery
MULTI MULTI MULTI MULTI MULTI V V V V V PLUS II SYNC II SPACE II Water II MINI
ACP PQCPA(B)11A0E
PI 485
PI 485
AC 220V
MULTI Single A
PQCPA(B)11A0E
Max.no. of indoor units Control / Monitoring Schedule management Lock function Temperature range restriction Temperature limit function Auto Changeover function History function Peak control PDI monitoring Interlocking function Printing function Auto Address Setting Function Statistics function Time limit function ECO V DX Control Peak Priority funtion Cycle Data Monitoring
256 indoor units Temperature 18C ~ 30C (AC Manager only) (AC Manager only) Error history Need of PDI PI 485
PMNFP14A0
ECO V
PHNFP14A0
Mechanical Accessory
AC Smart (Optional)
Piping Accessory
Schedule
Power Proportional
22 /23
PQCSS520A0E
Provides efficient control and monitoring system for up to 4,096 indoor units by connecting 16 ACPs.
AC Manager
AC Manager PQCSS520A0E PI 485 HUB AC 220V DC Comm, Line PMNFP14A0 (Max. 16 Indoors) / PMNFP14A1 (Max. 64 indoors) PI 485 AC 220V
FEATURES
PQCPA(B)11A0E+PQCSS520A0E
Max.no. of indoor units Control / Monitoring Schedule management Lock function Temperature range restriction Temperature limit function Auto Changeover function History function Peak control PDI monitoring Printing function Statistics function Time limit function ECO V DX Control Peak Priority function Cycle Data Monitoring Interlocking function AHU Control Function AWHP DO Kit
4,096 indoor units(16 ACP) Mode/Temp/Fan speed/Total Monitoring & Error history Need of PDI Only PQCPB11A0E Max. 16 ACP Internet
PI 485
ECO V PHNFP14A0
Mechanical Accessory
Piping Accessory
ACP
AC Manager
Fire Alarm
Schedule
Power Proportional
24 /25
PQNFB16A1
BNU-LW Gateway (Building Network UnitEasy interface between BMS and LG Air-conditioner LonMark certified Independence of BMS under the standard BMS - Operation system based on LNS( Network Service)
PQNFB17B0
) BNU-BN Gateway (Building Network UnitEasy interface between BMS and LG Air-conditioner BTL certified Independence of BMS under the standard BMS. - Operation system based on BACnet Service.
)
V-net
Monitoring items
On/Off status report Operation mode status report Fan Speed status report Lock status report Air flow status report Set temp. status report Current Space temp. status report Error status report User mode status report (for only ventilator)
Accumulator power distribution status report
Mechanical Accessory
Upper limit temp. status report Upper limit temp. setting Low limit temp. status report Low limit temp. setting Mode lock status report Mode lock setting AC operation mode setting (ECO V DX only) AC operation mode status report (ECO V DX only) AC On/Off status report (ECO V DX only) AC On/Off command (ECO V DX only)
COMBINATION
COMBINATION
Network
BMS system
Network
BMS system
Lighting control
Remote checking
Utility control Other LON devices Lighting control Remote checking Utility control Other LON devices
Indoor unit : Max. 256 units(Air-conditioner & Ventilation) Indoor address : 00~FF
RS485 RS485
Piping Accessory
BNU-LW PQNFB16A1
PI 485
BNU-BN PQNFB17B0
PI 485
Indoor unit Available with all Multi V series LGAP applied Air-conditioner AC Smart (Optional)
PHNFP14A0
ECO V
Outdoor unit
Indoor unit Available with all Multi V series LGAP applied Air-conditioner 26 /27
PUCKA0
AHU Comm. kit
To connect air handling unit for mid & large space and supply fresh air. Connectable capacity is from 18kbtu/h ~60kbtu/h.
PRCKA0 / PRLK048A0
AHU Comm. kit & EEV kit
To connect air handling unit for mid & large space and supply fresh air. Connectable capacity is from 28 kbtu/h ~96kbtu/h. V-net
SPECIFICATION
Model Name
Comm.Kit PUCKA0
SPECIFICATION
Weight(kg) NET
-
Dimension(mm) W
280
Gross
4
H
135
D
280
POWER
220~240V, 50/60Hz, 1Ph
Model Name
Comm.Kit EEV Kit PRCKA0 PRLK048A0
Weight(kg) NET
2.2 3.1
Dimension(mm) W
280 404
Gross
3.6 3.6
H
135 83
D
280 217
POWER
220~240V, 50/60Hz, 1Ph
Mechanical Accessory
SELECTION OF EVAPORATOR
Detail
SELECTION OF EVAPORATOR
Detail
When selecting evaporator, change Option PCB in Control kit according to below table. (Basic Option PCB' is for 24k Btu/h)
Capacity setting 'Option PCB'
When selecting evaporator, change Option PCB in Control kit according to below table (Basic Option PCB' is for 36k Btu/h)
(Main PCB)
Capacity setting 'Option PCB'
(Main PCB)
Capacity (Btu/h)
18K 24K 30K 36K 42K 48K 60K
Standard heat exchanger Maximum heat Air flow rate Volume(10 m) exchanger capacity(kW) (CMM)
5.8 5.8 9.8 9.8 20.9 20.9 26.9 5.4 7.8 8.8 11.0 13.8 15.4 16.3 18~21 20~23 22~26 25~32 31~35 33~45 42~55
Capacity (Btu/h)
28k 36k 42k 48k 76k 96k
Saturated Suction Temperature (SST) = 6C, SH (Superheat) = 5K, Air Temperature = 27C DB / 19C WB.
Saturated Suction Temperature (SST) = 6C, SH (Superheat)=5k, Air Temperature = 27C DB / 19C WB
WIRING DIAGRAM
Refrigerant piping Communication wire
WIRING DIAGRAM
Refrigerant piping Communication wire
Comm.kit
Piping Accessory
EEV kit
Comm.kit
28 /29
PRCKD20E / PRCKD40E
AHU Control kit
AHU have functions such as cooling, heating, humidification, air cleansing and ventilation to provide various solutions.
SPECIFICATION
Model Name
Control Kit PRCKD20E PRCKD40E
SPECIFICATION
Weight(kg) NET
43.5
Dimension(mm) W
600
Gross
48
H
750
D
285
POWER
Model Feature
1~4 Set ODU Combine 5~8 Set ODU Combine
Model Name
PATX13A0E PATX20A0E PATX25A0E PATX35A0E PATX50A0E
Weight(kg) NET
5.6 5.8 6.0 6.2 8.5
Dimension(mm) W
238 291
Gross
6.9 7.1 7.3 7.5 10.0
H
169 192
D
491 561
Model Feature
ODU Capacity : 8~16HP(23~46kW) ODU Capacity : 18~26HP(52~75kW) ODU Capacity : 28~36HP(82~104kW) ODU Capacity : 38~46HP(110~133kW) ODU Capacity : 48~56HP(139~163kW)
AHU Controller 220~240V, 50/ 60Hz, 1Ph ODU Comm. PCB Sensor Power Supply
Control Kit
Mechanical Accessory
Control kit
Control kit
Piping Accessory
30 /31
PQNFP00T0
DO Kit
Connected between ACP (AC Smart) and external devices, which can turn On/Off devices such as light, pump, motor, etc. V-net
PI 485 LINE-UP
Model name : PMNFP14A0 Power : Single phase AC 220V 50/60Hz
For outdoor unit. (16 units)
WIRING DIAGRAM
When the product input is less or equal to 25A (The air conditioner is controlled by turning On/Off the power supply line of the product.)
1. Pull out the power or shut down the breaker. 2. Connect the power line from the breaker to the additional relay cable. 3. Connect to the outdoor unit power line and the additional relay cable. 4. Finish the connected area with the insulating tape.
Mechanical Accessory
BUS_A BUS_B
ACP Controller
Breaker or Power
CN_COMM
1 2 3 4
Outdoor unit
Indoor unit
When the product input is greater or equal to 25A (The air conditioner is controlled by turning On/Off the indoor/outdoor communication line.)
1. Pull out the power or shut down the breaker. 2. Cut the indoor/outdoor unit communication line. 3. Connect the cut communication line to the additional relay cable as shown at the figure. 4. Finish the connected area with the insulating tape.
CN_POWER
BUS_A BUS_B
Breaker or Power
Outdoor unit Power line Communication line
CN_POWER
CN_COMM
1 2 3 4
Indoor unit
When the product input is greater than or equal to 25A (The air conditioner is controlled by turning On/Off the indoor/outdoor communication line.)
1. Pull out the power or shut down the breaker. 2. Cut the indoor/outdoor unit communication line. 3. Connect the cut communication line to the additional relay cable as shown at the figure. 4. Finish the connected area with the insulating tape.
Piping Accessory
BUS_A BUS_B
CN_COMM
1 2 3 4
MULTI V II & III series dont need any other PI 485 because MULTI V II & III series have PI 485 in its outdoor unit PCB.
CN_POWER
(
LG Air Conditioners 2012
Indoor unit
32 /33
Electronic Accessory
36 38 42 43 44
V-net
PDI
Dry Contact
CO2 Sensor
45
46
47
48
50
Cool/Heat Selector
Zone Controller
51
Mechanical Accessory
CTI
34 /35
Piping Accessory
PQNUD1S00
PDI (Power Distribution Indicator)
For the multi indoor units connected to an outdoor unit, the individual units and total system power consumption can be displayed on the device. This system can also be connected to a remote metering system.
Wiring Diagram
V-net Independent operation of PDI
Multi V PLUS II / Multi V SYNC II / Multi V III / Multi V WATER II / Multi V SPACE / Multi V MINI
Watt meter
3 380VAC or 1 220VAC
PDI Pulse type 1 220VAC
OVERVIEW
This device displays the power consumed for each indoor air conditioner unit that shares an outdoor unit. The power consumed by each indoor unit connected with the joint power line is indicated on the device. The information of the power distributed can be sent on a real-time basis through the remote metering system.
1 3 3 1 2
1 220VAC
Mechanical Accessory
Multi
3 380VAC or 1 220VAC
Watt meter
PDI
FEATURES
Accumulated total power consumption indicated Accumulated/Current power consumption of each indoor unit indicated. Accumulated power consumption by month indicated Max. connectable no. of indoor units : 64 indoor units 1 PDI per 1 outdoor unit Power failure-proof function : Data back up on EEPROM even if power turns off Connectable to PC based central controller Simple connection with the remote metering system (RS485 approach) Power distribution indication formula
Power used per room
3 380VAC or 1 220VAC
PDI
* Weight by room: Weight calculated based on the temperature set by room, mode and operating time.
1 220VAC
Piping Accessory
3 380VAC or 1 220VAC
PDI
ACP 36 /37
PQDSBNGCM1
Dry Contact
Connected between an indoor unit and external devices to control various functions. V-net
SPECIFICATION
Model Name
Contact point Power input Voltage / Non voltage input On/Off control Lock / Unlock Fan speed setting Thermo off Energy saving Temperature setting Error monitoring Operation monitoring
FEATURES
PQDSA/ PQDSB
1 Control point AC 220V from outside power source
PQDSA1/ PQDSB1
1 Control point AC 24V from outside power source
PQDSBC
2 Control points DC 5V&12V from indoor unit PCB
Model Name
Dimensions Contact Point Voltage / Non voltage input On/Off control Mode control Fan Speed Setting Thermo off Error Monitoring Operation monitoring Contact (output) Rotary switch 1 Rotary switch 2
PQDSBNGCM1
105 x 78 x 35 mm 8 contact point (Cool, Heat, Fan) (Low, Middle, High) 2 contact (operating, error) Operating set temp selection Operating logic selection
Mechanical Accessory
Refer to each model PDB for applicable models. With case model : PQDSB(1), PQDSBC / Without case model : PQDSA(1)
Dry contact
CHANGEOVERSW
Key Switch
Lighting Sensor
Fire Alarm
Timer
System Structure
TEMP_SW CN_OUT
PARTS DESCRIPTION
1 1 2 3 4 5 6
Field Supply
Error Display
Power AC or DC
CN-POWER : AC 220V / 24V CN-CC : Main PCB connector CN-DRY(L) : Dry Controller connector CN-DRY(SIG) : Dry Controller connector CN-DRY(ERROR CHECK) : Error check display connector CN-DRY(OPER STATE) : Operation display connector
STRUCTURE
Control Module
Piping Accessory
3 4 5 6 9 8 5 1 2 7 3 6 11 10 4
Connect communication wire between indoor unit and Dry Contact for 1 CN_INDOOR :
2 3 4 5 6 7 8 9 10 11
communication and supply power to Dry Contact for communication CN_PI 485 : PI 485 connector CHANGE_OVER_SW : Switch to select voltage (5V~12V) of contact point CN_CONTROL : Contact point signal input CONTROL_MODE_SW : Switch to select the control mode SETTING_SW : Switch to select whether to use set function of Dry Contact for communication TEMP_SETTING : Switch to set the desired temperature of the indoor unit CN_OUT(O1,O2) : Connector to show whether the indoor unit is operating CN_OUT(E3,E4) : Connector to show whether there is an error with the indoor unit DISPLAY_LED : LED to display the status of the Dry Contact for communication RESET_SW : Reset switch
38 /39
PQDSBCGCD0
Dry Contact
Connected between an indoor unit and external devices to control various functions.
PQDSBCDVM0
ODU Dry Contact
Dry contact for demand control. V-net
SPECIFICATION
1) Model name : PQDSBCGCD0 2) Specification Dimensions(mm) : 105x78x35 Applied Model : MULTI V Plus II & MULTI V III Function - Contact Point : 2 contact point (operation depends on the Control Mode_SW setting) - Pl 485 Communication Mode Input : LGAP 485 Communication - Voltage/Non Voltage Input - Error Monitoring Output - Operation Monitoring Output 3) Description The product is especially designed for interface with other controller using dry contact communication or RS485 communication
FEATURES
1) Model name : PQDSBCDVM0 2) Specification Applied Model : MULTI V III Function : - Demand control (3 contact signal) - Demand control (Co-work with DDC) - ODU fan low speed control (Night low noise operation) - All Off - Error Output (Display) 3) Description The product is especially designed for demand control.
Mechanical Accessory
Field Supply
Error Display
Power AC or DC
STRUCTURE
STRUCTURE
<RS485 Communication Function>
Room Control master
Piping Accessory
RS485 Max. 16
Indoor unit
Dry contact
<PQDSBC Function>
40 /41
PRVCO
Variable Water Flow Control Kit
Accessory developed for controlling the water flow in variable valve composure.
PRIP0
Independent Power Module
EEV full close function in case of power cut-off of indoor units. V-net
FEATURES
1) Model name : PRVC0 2) Specification Applied Model : Multi V Water Function - Water pump valve control (0~10V) - Minimum voltage setting available - Operation, error output (display) 3) Description The product is especially designed to control water pump valve in Multi V Water system.
Cooling Tower
SPECIFICATION
1) Model name : PRIP0 2) Specification Applied Model : Multi V Indoor Function - Supply Voltage : DV12V 5% - Indoor EEV full close at power cut-off 3) Description The product is specially designed to close the Indoor EEV at power cut-off.
Mechanical Accessory
Application Scene
STRUCTURE
3 phase 400V
Outdoor Unit Pump/Cooling Tower Controller
Cooling Tower
1 phase 220V
4th
Switch BOX
3rd
Pressure sensor Flow meter From Water Source Inverter pump Main Switch
Piping Accessory
Switch BOX
Flow control valve : Regulates the flow or pressure of a fluid, normally responding to signals generated by independent devices. Flow Meter : Measures mass flow rate of a fluid traveling through a tube. (The mass flow rate is the mass of the fluid traveling past a fixed point per unit time.) Pressure Sensor : Measures the pressure.
3rd
Main Switch
42 /43
PES-C0RV0
CO2 Sensor CO2 concentration sensor in ventilation system.
PQRSTA0
Remote Temperature Sensor
Sensor for detecting the room temperature. V-net
SPECIFICATION
1) Model name : PES-C0RV0 2) Specification Applied Model : Eco V Function - Supply Voltage : DV12V 5% - Output : 0~5V (Linear output, 1~2,000 ppm CO2) - Accuracy : 30 ppm 5% of reading 3) Description The product is especially designed to detect CO2 concentration in Eco V system.
FEATURES
It can help to detect the exact room temperature at the optimal position.
MODELS APLLIED
Ceiling cassette type Ceiling concealed duct type
Mechanical Accessory
Open
Closed
Windows
Windows
Open
2500
WIRING DIAGRAM
OFF
1. Wire to the control box in the indoor unit by removing the existing thermistor and connect the extension cable its place. 2. Cut the extension cable to the appropriate length and connect the screw terminal of the remote sensor.
Extension cable
Connector
CO2 Sensor
1000
ON
Time (min)
Indoor unit
Piping Accessory
44 /45
PRDSBM
Cool/Heat Selector
Users can select cooling, heating, or fan mode to prevent cooling and heating mixing errors during seasonal changes.
PZCWRCG3
Group Control Wire
Cables used to connect a wired remote controller with many indoor units. V-net
FEATURES
Indoor unit control without central controller Select operation mode : Cooling, Heating, Fan mode Mode lock for cooling & heating mixing error-proof during the change of season.
Fan or Off Cooling Mode Change Heating
FEATURES
type
Y- type cable Long cable
PZCWRCG3
25cm length 9.6m length
MODELS APPLIED
Wiring Diagram
Mechanical Accessory
Indoor 2
Indoor terminal block
YL(SIGNAL) BR(GND)
Indoor 3
Indoor terminal block
YL(SIGNAL) BR(GND)
WIRING DIAGRAM
Connect terminals (, , GND) on the back side of the outdoor dry contact to terminals (, , GND) of outdoor as show below.
Push Button Insert wire method
<Wiring Diagram>
Note 1 Cable assembly for indoor units. 2 Cable assembly for connecting indoor to indoor. - Please connect cable assembly 1 with already connected indoor unit.
Insert wire to connector Shows field wiring Connected wiring <Outdoor Dry Contact Back Side>
Communication line length can be maximum 300m, use communication line as thick as 1.25mm.
Piping Accessory
46 /47
ABZCA
Zone Controller
Controls air conditioning in up to 4 zones.
WIRING DIAGRAM
V-net
1 2 3 4 5 6 7 8
FEATURES
Controls different zones (up to 4 zones) Maintain proper temperature of each zone Auto variation of dampers Auto control of fan speed
ROOM1 temperature sensor ROOM2 temperature sensor
5. Main lead wires 1. Zone Controller PCB 3. Case
Mechanical Accessory
MODELS APLLIED
Ceiling Concealed Duct (High Static Pressure)
Refer to each model PDB for applicable models
COMPONENTS
Array of PCB & Controllers
* Central Controller * Central Sub PCB
Indoor Unit
Piping Accessory
PARTS INCLUDED
** Main PCB
Factory supplied : Zone controller PCB (1EA) Transformer (1EA) Case (1EA) Cover (1EA) Main lead wires (1EA) Screws (1EA) Holder (4EA) Installation manual (1EA) Purchased locally (reference siemens, honneywell) Damper Motor Thermostat Damper
** Wired Remote Controller
** Display PCB
AC 24V Transformer
* RF Remote Controller
Outdoor Unit
48 /49
AQLA
Low Ambient Kit
Maintains cooling function for low ambient temperature.
PKFC0
CTI (Communication Transfer Interface)
Communicate with other Mechanical Thermostat and Unitary product. V-net
FEATURES
Depending on the condensing temperature, speed of outdoor fan is varied automatically while compressor is on. Maintains cooling function for low ambient temperature such as (-5C). Specific installation requirements - Gymnasium, Control rooms, Machine rooms, Computer rooms Simple and easy to install Used only for cooling mode
FEATURES
Transfer each local contact signal from Thermostat to Unitary product
MODELS APLLIED
Unitary
Mechanical Accessory
MODELS APLLIED
Convertible, Ceiling Concealed Duct Single split Ceiling Cassette (Refer to each model PDB for applicable models) Multi Split (Specific models)
PARTS INCLUDED
CTI PCB (1EA) Transformer Manual 11Pin Cable (to connect with Unitary PCB) 3Pin Cable (to connect with Unitary PCB)
PARTS INCLUDED
AQLA fan speed controller Sensor assembly Buckle-clip Adhesive insulation, 20mm x 80mm Tie wrap,100mm Instruction manual Screw 1EA 1EA 3EA 1EA 2EA 1EA 3EA
WIRING DIAGRAM
R : 24V(+) C : 24V(-) G : Fan Y1 : Cooling changeover W1 : Heating changeover Y1 : Comp1 Y2 : Comp2 EM : Emergency W1 : Heater1 W2 : Heater2
Connection with temperature sensor provided
R C G O B Y2
PARTS INCLUDED
Y1
CN_AC24V(+)
Piping Accessory
220V
50 /51
Mechanical Accessory
Mechanical Accessory
For comfortable and convenient air conditioning.
54
55
56
58
60
V-net
Panel ARTCOOL
Electric Heater
61
62
64
65
66
Plasma Kit
AWHP
Cassette Cover
Air Guide
Mechanical Accessory
52 /53
Piping Accessory
MODELS APPLIED TO
ARTCOOL Mirror
FEATURES
In some places where natural drainage is not possible drain pump is very useful to pumps out condensed water from indoor unit. Drain pump assembly (AC 220~240V, 50/60Hz)
Blue
Silver
Mirror
MODELS APLLIED
Mechanical Accessory
Ceiling concealed duct (refer PDB for applicable models)
ARTCOOL SF Chassis
E Chassis ABDPE
Default
T Chassis ABDPT
Default -
APPLICATION
Color
White wood Blue Wood Metal Mirror Cherry Silver Red Gold White Silver
S8
PSAP8CB10 PSAP8CR10 PSAP8CV10 -
SF
PSAPFCV11 PSAPFCE11 PSAPFCG11 PSAPFCH11
1 2 3 4 5 A B D P G
Chassis Accessory name Drain Pump Kit Ceiling concealed duct Accessory
Drain Pump Drain Pipe
1/50~1/100
MAX 700mm
PARTS INCLUDED
For E Chassis Models :
Drain pump assembly (1EA) (AC 220~240V,50/60Hz,400CMM) Elbow (32)(1EA) Hose (1EA) Tie wrap (2EA) Screw (10EA) Rubber (1EA) Installationmanual (1EA)
* Panel color
CB : Blue CE : Red CR : Mirror CG : Gold CH : WhiteSilver CV : Silver
Piping Accessory
54 /55
50 / 60Hz
V-net
Model Name
LKAEH052 LKAEH102 LKAEH18B LKAEH36B LKAEH36BL LKAEH098 LKAEH188 LKAEH368L
Control Stages
1 1 1 2 2 1 1 2
Voltage (V/)
208~240/1 208~240/1 208~240/3 208~240/3 208~240/3 380~415/3 380~415/3 380~415/3
M.F.S
60/60 60/60 60/60 125/125 125/125 60/60 60/60 150/150
M.C.B
60/60 60/60 60/60 125/125 125/125 60/60 60/60 150/150
M.F.S
60/60 60/60 60/60 125/125 125/125 60/60 60/60 150/150
M.C.B
60/60 60/60 60/60 125/125 125/125 60/60 60/60 150/150
Single Package
Ducted Split
* MCA : Minimum current ampere / MFS : Maximum fuse size / MCB : Maximum circuit breaker
FEATURES
Provides quick and additional heating.
Ducted Split
Ton
3~5RT 3~5RT 6.25~12.5RT 6.25~17.5RT 15~20RT 15~20RT
Model Name
ANEH0521A ANEH1021A ANEH09B1B ANEH18B1B ANEH18B1C ANEH3682C
Control Stages
1 1 1 1 1 2
Voltage (V/)
208~240/1 208~240/1 208~240/3 208~240/3 208~240/3 380~415/3
M.F.S
60/60 60/60 60/60 70/70 70/70 90
M.C.B
60/60 60/60 60/60 70/70 70/70 90
M.F.S
60/60 60/60 60/60 70/70 80/80 90/90
M.C.B
60/60 60/60 60/60 70/70 80/80 90/90
Mechanical Accessory
MODELS APPLIED TO
Single package Ducted split (refer PDB for applicable models)
* MCA : Minimum current ampere / MFS : Maximum fuse size / MCB : Maximum circuit breaker
PARTS SUPPLIED
Single Package
Electric heater (1EA) Installation manual (1EA) Heater control box (1EA) Screws
Heater (kW) Accessory name EH : Electric heater Accessory Product LK : Single package LN : Ducted split
56 /57
Piping Accessory
PARTS INCLUDED
V-net For the suction grille :
Suction panel with air filter (1EA) Suction panel fix bolt M5x18 (4EA) Installation manual (1EA)
Dimension FEATURES
High external static pressure facilitates unit use with flexible ducts of varying lengths. When using suction panel, unit requires only 270mm of ceiling space. Blends unobtrusively with any interior decoration.
A B
(Unit : mm)
A B
A
(Unit : mm)
Mechanical Accessory
MODELS APLLIED
Ceiling concealed duct _ Built-in type (refer PDB for applicable model)
PBSGB30 PBSGB40
A
910 1188
B
359 359
C
56 56
A
PBSC30 PBSC40
821 1100
B
274 274
C
42-250 42-250
APPLICATION
Capacity (Btu/h)
pbsc30 pbsc40
over 520mm
pbsgb30 pbsgb40
over 270mm
Model Name
7K
9K
12K
15K
18K
24 K
58 /59
Piping Accessory
PTEGM0
Auto Elevation Grille
Easy filter cleaning with elevation grille.
PTPKM0 / PTPKQ0
Plasma Kit
Air purifying filter to prevent from dust and allergy. V-net
FEATURES
4-Point Support Structure Auto Horizontal Control Memory for users access level Auto Bottom Detection
FEATURES
It can remove microscopic contaminants and dust and house mites, pollen, pet fur to help prevent allergic diseases like asthma.
Max. 4.5m
STOP Memory
MODELS APLLIED
4Way cassette - Single MULTI V (refer PDB for applicable models)
Mechanical Accessory
MODELS APPLIED TO
4 Way cassette - Single, Multi V (refer PDB for applicable models)
PARTS SUPPLIED
Inlet Grille (1EA) Auto elevation grille kit (1EA) Wireless Remote Controller (1EA) Screws (4EA) Installation manual (1EA)
PARTS SUPPLIED
Plasma Kit (1EA) Screws Installation Manual (1EA)
APPLICATION
Piping Accessory
Operate the auto Easy maintenance elevation grille by the wireless remote controller
60 /61
Indoor
PHLTA
PHLTB
FEATURES
Easy to install the sanitary water tank for monobloc. There is a MCCB to protect the product. Dimension(mm) (HxWxD) : 250x170x110 Weight(kg) : 2.1 To extend THERMA V functionality in generating domestic hot water. Only applied to split-type THERMA V.
To be installed inside THERMA V indoor unit.
Hot Water
Radator
Room Thermostat(Field supply) Motorized 2way control valve(Field supply) By-pass valve(Field supply)
Mechanical Accessory
MODELS APPLIED TO
Components : THERMA V System, PHLTA, and Field-supplied items.
Outdoor
Outdoor Unit Indoor Unit
PHLLA
Solar Heating Kit
Indoor
Radator
Piping Accessory
FEATURES
To interface solar-thermal system with split-type THERMA V and double coil sanitary tank. Installed at the water pipe, between sanitary tank and solar-thermal system. Dimension(mm) (HxWxD) : 110x55x22
62 /63
PTVK410
PTVK420
PTVK430
FEATURES
Installation Bracket Bolt Screw Installation manual
FEATURES
Specially designed for indoor unit. Covers the side area of cassette. Gives elegant looks. Light weight. Suitable when false ceiling is unavailable.
Mechanical Accessory
MODELS APPLIED TO
Ceiling cassette - 4Way (TD, TD1, TH, TP, TN, TM, TQ, TR)
MODELS APPLIED TO
Ceiling Cassette - 4Way (TP, TN, TM)
PARTS SUPPLIED
Cover A (4EA), Cover B (4EA) Cover C (4EA), Cover D (4EA) Screws Installation Manual (1EA)
Dimension
406
Weight(kg) NET
5 5 5.9 4.5
Dimension(mm) W
570 570 815 495
Gross
7.8 7.8 8.8 6.7
H
625 625 495 445
D
350 350 250 240
13
443
840
435
81
419 840 55mm
64 /65
Piping Accessory
PQAGA / PRAGX*SO
Air Guide
Easy air discharge at odd places
Multi V Plus II
1 2 3 4 5 P Q A G A
Chassis Air Guide
Multi V III
1 2 3 4 5 6 7 8 P R A G X 3 S O
Serial Air Flow Direction / S : Basic Model Chassis X3 : UX3 / X2 : UX2 Air Guide R : MULTI V Part
MULTI V Plus II
MULTI V III
FEATURES
Converts vertical discharge into horizontal discharge. Designed for outdoor discharge air. Direction of air discharge can be changed by simple installation. Installation flexibility
APPLICATION
564
33
MODELS APPLIED TO
MULTI V type, MULTI V Plus II type, MULTI V III (UX2, UX3)
632
512
512
R6
00
Mechanical Accessory
50 45
652
618
60
564 652 564 33 33
512
512
Dimension
Multi V Plus II
0 R6
50 512
512
R6
00
Multi V Plus II
Multi V Plus II
45
652
618 900
60
60
0
00 00 R6 R6
512 512
652
512 512
500
372.5
652
390
50
5050
45 45
50
45
632 632
723.5 125
0 0 60 60
832
50
500
R6
00
Piping Accessory
900
Model Name
PQAGA PRAGX2S0 PRAGX3S0
Gross Weight
6kg 22.5kg 17kg
Met Weight
5kg 12.3kg 9.4kg
900
718
00
500
570 570
500
762
0 60
500
50
45
500
50 50
R6
760
45
832
718
00 00 R6 R6
762
50 50
45 45
832 832
760 760
762
66 /67
Piping Accessory
Piping Accessory
For easy installation and service.
70
72
74
75
76
V-net
Branch Distributor
Stopper Valve
78
80
81
82
Drain Hose
Drain pan
Mechanical Accessory
68 /69
Piping Accessory
2 Units
PMUB 11A
Gas Pipe
Liquid Pipe
(1:1) (1:1)
FEATURES
Various Y-branch pipe of different capacities make installation much easier. Y-branch and header branch for both gas and liquid are provided. Insulation material is also provided for covering the branches.
3 Units PMUB 111A
(1:1:1)
(1:1:1)
Mechanical Accessory
MODELS APPLIED TO
Synchro
4 Units PMUB 1111A
PIPING DIAGRAM
(1:1:1:1)
(1:1:1:1)
Piping Accessory
2 branch
3 branch
4 branch
70 /71
SPECIFICATION
V-net
(R410A)
PMBD3620
Connectable Capacity Casing color Number of Indoor unit (Btu/hr)
1~2 5k/7k/9k/12k/18k/24k Paintingless 1, 50/60Hz, 220~240/220 10 0.05 302x143x252 422x202x300 4.8 4x0.75 4x0.75 9.52 19.05 6.35x2 9.52x2 4 8 1
PMBD3630
1~3 5k/7k/9k/12k/18k/24k Paintingless 1, 50/60Hz, 220~240/220 10 0.05 302x143x252 422x202x300 4.9 4x0.75 4x0.75 9.52 19.05 6.35x3 9.52x3 4 8 1
PMBD3640
1~4 5k/7k/9k/12k/18k/24k Paintingless 1, 50/60Hz, 220~240/220 10 0.05 302x143x252 422x202x300 5.0 4x0.75 4x0.75 9.52 19.05 6.35x4 9.52x4 4 8 1
PMBD3620
PMBD3630
PMBD3640
Power source Power consumption Running current Dimensions Packing dimension Net weight Connecting cable Piping connection (Outdoor unit) Piping connection (Indoor unit) Parts (W) (A) (mm) (mm)
(W x H x D) (W x H x D)
FEATURES
Distribution of refrigerant to various indoor units. 3 models (2, 3, 4 indoor units) Consists of LEVs inside it Controlling PCB inside the unit Internally insulated (prevents any chances of drainage) Flare joints for easy and clean installation Compact design (low height) Flexible installation
Indoor unit No. x mm Outdoor unit No. x mm liquid (mm) Gas (mm) Liquid (mm) Gas (mm) Hanger (EA) Screw (EA) Manual (EA)
Mechanical Accessory
No brazing
Just flaring
MODELS APPLIED TO
systems (refer PDB for applicable models)
INSTALLATION
Position of branch distributor in the system PDB (Select) - Installation PDB
Number of indoor units connectable Maximum capacity Branch distributor MULTI Parts
PARTS SUPPLIED
BD(Banch Distributor) unit (1EA) Hanger metal (4EA) Screws (8EA) Installation Manual (1EA)
72 /73
Piping Accessory
PRAC1
Refrigerant charging Kit
To recharge refrigerant after a pump down or when refrigerant is either insufficient or excessive. V-net
FEATURES
Y Branch and Branch kit make Multi Fdx installation much easier. Y-Branch and Branch kit for both gas and liquid are provided. Insulation material is also provided for covering the branches.
MODELS APPLIED TO
Procedure
Arrange manifold, capillary assembly, refrigerant vessel and scale Connect manifold to the gas pipe service valve of outdoor uint as shown in the figure. Connect manifold and capillary tube. Use designated capillary assembly only. If designated capillary assembly isnt used, the system may get damaged. Connect capillary and refrigerant vessel. Purge hose and manifold. After 568 is displayed, open the valve and charge the refrigerant
1, 3
Application
Mechanical Accessory
MODELS APPLIED TO
Mainfold
Dimension
202 133
Capillary Assembly
PARTS SUPPLIED
Y Branch for Gas side and Liquid side (1 set) Installation manual (1EA)
* Fault Detect & Diagnosis
Refrigerant
69
Piping Accessory
Model Name
PMBL3620
No. of BD units
2 units
Applicable Model
Only 3, 36k Btu/h
Specification
15.88 15.88
Gas
6.35 6.35
Liquid
15.88 15.88
6.35 6.35
PMBL5620
2 units
1, 3
19.05 19.05
9.52 9.52
19.05 19.05
9.52 9.52
PMBL1203F0
3 units
1, 3
19.05 19.05
9.52
9.52
9.52
74 /75
PRVT120 under 1/2 (inch) PRVT780 under 7/8 (inch) / PRVT980 under 9/8 (inch)
Stopper Valves
SPECIFICATION
V-net case1
In case unit) of the installation of additional inlet side of the connector, and weld indoor (room3, 4Cut is used. room1, 2 need to install the pipe indoor unit, outlet side connector should Stopper Valve is already installed be cut according to installation pipe.
"A"
9.52 : 19.05 3.0m 9.52 : 19.05 3.0m
FEATURES
Spec
9.52 : 15.88 In case of installation of stopper valve, In case of installation of additional are part should be facing towards 10.0m indoor unit, SVC valve should be in additional indoor unit. closed state
Room2
Room3
Mechanical Accessory
PRVT780
3.0m
Room4
PRVT980
In case of installation of additional indoor unit, refrigerant of used indoor unit must be discharged.(Room3 & Room4) If stopper valve is already installed, you can install additional indoor unit without refrigerant loss from the entire system. After installation of additional indoor unit, you just need refrigerant charging for A section. Then, open the Stopper Valve.
Cut inlet side of the connector, and weld the pipe In case of the installation of additional indoor unit, outlet side connector should be cut according to installation pipe.
Open/close port
Charge port
Usage
9.52 : 19.05
This unit can be applied for the additional indoor units installation. This unit can be applied for each indoor units service
3.0m 9.52 : 19.05 3.0m 9.52 : 15.88 In case of installation of stopper valve, are part should be facing towards additional indoor unit. 10.0m
Stopper Valves
Pin(Closed)
INSTALLATION
In case of the installation of additional Cut inlet side of the connector, and weld In case of the installation of additional Cut inlet the side of the connector, and weld pipe indoor unit, outlet side connector should the pipe indoor unit, outlet side connector should be cut according to installation pipe. be cut according to installation pipe.
In case of installation of additional indoor unit, SVC valve should be in closed state 6.35 : 12.7
Piping Accessory
3.0m
Room1
Room2
of the of additional Cut inlet side of the and and weldweld In case 1. C utCut inlet side of the connector, 2. In case of the installation of In case of installation the installation of additional inlet side of connector, the connector, the pipepipe indoor unit,unit, outlet sideside connector should indoor outlet connector should andthe weld the pipe additional indoor unit, outlet be cut to installation pipe. be according cut according to installation pipe. side connector should be cut according to installation pipe.
In case installation of stopper In case of installation of additional 3. In case ofof installation of stop- valve, 4. In case of installation of addiIn case of installation of stopper valve, In case of installation of additional are part should be should facing towards indoor unit, SVC valve should in part indoor unit, SVCbe valve are per part valve, should flare be facing towards indoor unit, tional SVC valve should be in additional indoor unit. closed state be facing additional should be in closed state additional indoortowards unit. closed state
indoor unit.
Room3
-When welding, service valve shoud be wrapped by wet cloth. -When welding, service valve shoud be wrapped by wet cloth.
Pin(Closed) Pin(Closed)
Pin(Open) Pin(Open)
In case of installation of stopper valve, of installation of additional In case of installation of stopper valve, In case In case of installation of additional areare part part should be facing towards indoor unit,unit, SVCSVC valve should be in should be facing towards indoor valve should be in LG Air Conditioners 2012 additional indoor unit. closed state additional indoor unit. closed state
76 /77
V-net
High pressure Low pipe pressure High pressure Gas Low pressure Gas pipe Gas pipe Gas pipe Models Models Liquid pipe High Gaspipe pipe Gas Liquid pipe Models Liquid pipe Liquid pipeLiquid pressure Low pressure Models Models pipe High pressure Low pressure High pressureGas pipeHigh Low pressure Models Models Liquidpipe pipe Liquid pressure Low pressure Models Indoor unit Indoor unit Liquid pipe Highpressure pressure High pressure Lowpressure pressure Low pressure High Low High pressure Low pressure OD9.52 6.35 OD9.52 6.35 reducer reducer OD15.88 12.7 OD15.88 12.7 Indoor unit Indoor unit reducer Indoor unit Indoor unit Indoor unit Indoor unit Indoor unit OD9.52 6.35 OD9.52 6.35 reducer reducer Indoor unit OD15.88 12.7 OD15.88 12.7 reducer OD9.52 6.35 OD9.52 6.35 reducer OD9.52 6.35 OD9.52 6.35 OD15.88 12.7 reducer OD15.88 12.7 reducer OD15.88 12.7 OD15.88 12.7 OD9.52 6.35 reducer OD15.88 12.7
PRHR020 PRHR020
OD9.52 6.35 OD19.05 15.88 12.7 15.88 OD19.05 12.7 OD22.2 19.05 OD22.2 15.88 19.05 OD22.2 19.05 OD22.2 15.88 19.05 12.7 OD15.88 OD15.88 12.7OD15.88 15.88 15.88 15.88 12.7 12.7 12.7
PRHR021
FEATURES
Max. 32 indoor units can be connected by module design. (Max 8 indoor units per branch) Due to the automatic search algorithm for piping detection, easy installation Subcooling cycle in HR unit makes the system efficiency maximum.
HR unit reducer
OD9.52 6.35 OD19.05 OD19.05 15.88 12.7 OD22.215.88 19.05 12.7 15.88 PRHR020 OD19.05 15.88OD19.05 12.7 15.88 12.7 OD22.2 19.05 OD19.05 15.88 15.88 12.7 12.7 OD22.2 19.05 19.05 15.88 15.88 PRHR020 OD19.05 OD22.2 PRHR020 OD9.52 6.35 OD9.52 6.35 OD19.05 15.88 12.7 OD22.2 19.05 15.88 OD9.52 6.35 OD9.52 6.35 OD12.7 9.52 OD9.52 6.35 OD12.7 9.52 OD9.52 6.35 OD15.88 OD9.52 HR unit6.35
OD12.7 9.52 OD15.88 9.52 12.7 OD12.7 9.52 OD15.88 OD15.88 12.7 12.7 OD15.88 OD15.88 12.7
PRHR030 PRHR030 9.52 12.7 OD22.2 9.52 / / OD15.88 12.7 OD15.88 PRHR030 PRHR040 PRHR040 PRHR030 PRHR030 OD15.8819.05 12.7 15.88 9.52 OD15.88 12.7 / 9.52 OD22.2 OD15.88 9.52 9.52 12.7 OD22.2 / OD15.88 12.7 / 12.7 OD15.88 12.7 9.52 9.52 OD22.2 19.05 19.05 15.88 15.88 OD15.88 OD22.2 PRHR040 PRHR040 PRHR040 OD15.88 12.7 9.52 OD22.2 19.05 15.88
15.88 OD28.58
22.2 OD28.58 19.05 22.2 OD28.58 22.2 22.2 OD28.58 19.05 22.2 15.88OD19.05 OD19.05 15.88 OD19.05
OD22.2 19.05 15.88 OD28.58 22.215.88 19.05 19.05 19.05 OD22.2 15.88 OD28.58 OD28.58 22.2 22.2 19.05 19.05 OD28.58 OD28.58 22.2 19.05
OD15.88 12.7 OD15.88 12.7 OD15.88 12.7 OD15.88 12.7 12.7 OD15.88 OD15.88 12.7
OD19.05
15.88
Mechanical Accessory
MODELS APPLIED TO
INSTALLATION
OD19.05 OD15.88 12.7 15.88 OD19.05 OD15.88 12.7 OD15.88 12.7 OD19.05 OD19.05 15.88 15.88 OD19.05 15.88
15.88 15.88
PRHR031
3 14.4/43.2 8 0.040 0.040 20 801x218x617 9.52(3/8) 15.88(5/8) 15.88(5/8) 28.58(11/8) 22.2(7/8) 1 / 220~240 / 50
PRHR041
4 14.4/57.6 8 0.040 0.040 22 801x218x617 9.52(3/8) 15.88(5/8) 15.88(5/8) 28.58(11/8) 22.2(7/8) 1 / 220~240 / 50
Piping Accessory
Dimension
HR unit (1EA) Hanging bolts M10 or M8 (4EA) Nut M8 or M10 (8EA) Flat washers M10 (8EA) Reducers
IT Room
Room
78 /79
PRODX20 / PRODX30
Drain Pan
Installed to drain water from a Multi V III outdoor unit. V-net
Procedure
It reduces the installation time by over 40% with elbow-less drain hose. Midget drain pump covers maximum 800mm high, featuring easy piping installation.
USAGE
This unit can be applied for outdoor units drain
STANDARD
Installation
Mechanical Accessory
Max. 450 1 Way, 4 Way Ceiling Cassette, Concealed Duct (with drain pump)
250
Push drain pan in the direction of the arrow. Brackets can be fixed on the side panel
Models applied to Ceiling Cassette, Ceiling Concealed Duct. (refer PDB for applicable model.)
Service Valve
Quantity
30EA 30EA 5EA 5EA
Length
500mm 700mm 500mm 700mm
Drain Pipe
In case of the installation of drain pan, drain pipe should be located below the SVC valve.
This unit does not cover water drops of the outside product Connect drain hose to drain pipe for drain condensate
Piping Accessory
Model name
Model
PRODX20 PRODX30
L
920mm 1240mm
Remark
UX2 UX3
80 /81
Header Branch
R410A
Models Gas pipe Liquid pipe
(Unit : mm)
Header Branch
Y Branch
FEATURES
Various Y-branch pipe of different capacities make MULTI V installation much easier. Y-branch and header branch for both gas and liquid are provided. Insulation material is also provided for covering the branches.
Mechanical Accessory
PIPING DIAGRAM
10 branch / ARBL1010 (under 44.8kW) Y- branch Header Branch 10 branch / ARBL2010 (under 95.2kW)
Outdoor unit
MODELS APPLIED TO
Piping Accessory
82 /83
PIPING ACCESSORY
R410A /
2 Outdoor Units Models Gas pipe Liquid pipe Models 3 Outdoor Units Gas pipe Liquid pipe Models
(Unit : mm)
R410A /
2 Outdoor Units Low Pressure Gas pipe Liquid pipe High Pressure Gas pipe Models 3 Outdoor Units Low Pressure Gas pipe Liquid pipe
(Unit : mm)
V-net
R410A /
2 Outdoor Units Models Low Pressure Gas pipe
416 408 416 408 I.D.28.58 I.D.28.58 111 I.D.28.58
R410A /
3 Outdoor Units Liquid pipe
C C
416 408
I.D.28.58
2 Outdoor Units
I.D.15.88
Liquid pipe
I.D.22.2 O.D.19.05 I.D.12.7 I.D.12.7 70 I.D.15.88
I.D.28.58
I.D.22.2 O.D.19.05
Models
Liquid pipe
Models
Liquid pipe
Mechanical Accessory
70 298 334 334 281 I.D.34.9 I.D.34.9 111 I.D.41.3 O.D.34.9 111 I.D.22.2 I.D.28.58 I.D.28.58 125 I.D.15.88 I.D.12.7 334 334 281 134 I.D.22.2 I.D.22.2 I.D.19.05 I.D.25.4 O.D.22.2 I.D.28.58 I.D.28.58 80 I.D.15.88 I.D.12.7 80 I.D.19.05 I.D.19.05 I.D.25.4 O.D.22.2 83 I.D.15.88 I.D.12.7 I.D.19.05 83 I.D.19.05 83 281
I.D.28.58
I.D.28.58
331 314
I.D.15.88 I.D.15.88
331 314
I.D.31.8 I.D.34.9
I.D.22.2
I.D.41.3 I.D.38.1 O.D.34.9 I.D.41.3 I.D.38.1 O.D.34.9 I.D.28.58 130 416 408 341 298 130 416 408 I.D.28.58 I.D.28.58 341 298 111
I.D.28.58
I.D.22.2 O.D.19.05
I.D.12.7
I.D.15.88
298 I.D.41.3
I.D.22.2
I.D.19.05 I.D.19.05 83
I.D.19.05
I.D.28.58
416 408
I.D.28.58 111
I.D.15.88 I.D.19.05
331 314
341 298
334 281
I.D.28.58
I.D.22. 2 I.D.19.05 I.D.19.05 83
416 408
I.D.28.58 111
I.D.41.3
O.D.34.9
I.D.15.88 I.D.12.7
ARCNB21
I.D.22. 2
I.D.12.7 I.D.9.52
83
I.D.22. 2
I.D.19.05
I.D.19.05
83
ARCNB31
I.D.34.9
111
I.D.31.8 I.D.34.9
I.D.15.88 I.D.12.7
I.D.22. 2
I.D.28.58
I.D.22. 2 O.D.19.05
I.D.28.58
331 314
331 314
I.D.12.7
I.D.15.88
I.D.15.88 I.D.12.7
125
I.D.28.58
I.D.28.58
281
130
70
C B C B
C C
I.D.31.8 I.D.34.9
I.D.22.2
I.D.41.3 I.D.34.9 I.D.34.9 111 111 I.D.41.3 I.D.38.1 O.D.34.9 I.D.41.3 I.D.38.1 O.D.34.9 I.D.22.2 I.D.28.58 I.D.28.58 I.D.41.3 O.D.34.9 I.D.41.3 O.D.34.9
I.D.22.2 O.D.19.05 83 I.D.19.05 I.D.19.05 I.D.15.88 I.D.19.05 I.D.15.8883 I.D.12.7 I.D.12.7 70 I.D.15.88 I.D.12.7
(Unit : mm) A
A B
4 Outdoor Units
130 130 I.D.28.58 125 341 I.D.28.58 125 341 415 375 298 415 375 298 I.D.41.3 I.D.41.3 I.D.34.9 111 I.D.34.9 I.D.41.3
70
A A ARCNN41 ARCNN41
375
130
I.D.44.48 I.D.53.98
134
I.D.41.3
I.D.15.88 I.D.12.7
(Unit : mm)
C B A C B
334
334
4 Outdoor Units
83 I.D.19.05 83 I.D.19.05 83 83
134 O.D.34.9
Liquid pipe
I.D.25.4 O.D.22.2 I.D.15.88 I.D.12.7 I.D.15.88 I.D.12.7 80
I.D.28.58
I.D.28.58 I.D.28.58
I.D.25.4 O.D.22.2
Models
Liquid pipe
80 334 281
334
281
A C
I.D.44.48 I.D.53.98
134
I.D.41.3
I.D.22.2 134
I.D.19.05
I.D.22.2
83
I.D.19.05
83
415 375
334 281
341 298
I.D.25.4 O.D.22.2
I.D.15.88 I.D.12.7
ARCNB41
I.D.44.48 I.D.53.98
I.D.41.3
134
I.D.19.05
83
I.D.34.9
111
I.D.15.88 I.D.12.7
I.D.28.58
80
I.D.28.58 125
84 /85
Piping Accessory
PIPING ACCESSORY
R410A /
(Unit : mm)
R410A /
(Unit : mm)
R410A /
Models Low Pressure Gas pipe Liquid pipe
(Unit : mm)
V-net
Models
Gas pipe
I.D12.7 I.D15.88 I.D15.88
Liquid pipe
I.D9.52 I.D9.52 I.D6.35
Models
Gas pipe
I.D19.05 I.D28.58 I.D22.2 I.D15.88 I.D12.7
Liquid pipe
I.D. 19.05
I.D12.7
I.D19.05 I.D15.88 I.D15.88 I.D12.7
I.D. 15.88
I.D9.52
I.D15.88
I.D. 15.88
ARBLB01620
ARBLN01621
(under 22.4kW)
I.D15.88 I.D19.05 O.D15.88 I.D12.7 I.D15.88
I.D6.35
ARBLN07121
I.D. 9.52 I.D6.35
I.D12.7 I.D31.8 I.D19.05 O.D22.2 I.D28.58 O.D31.8 O.D19.05 I.D28.58 I.D15.88 O.D12.7 I.D6.35 I.D9.52 O.D12.7 I.D19.05
I.D12.7
ARBLB01621
(under 22.4kW)
I.D15.88
I.D. 19.05 I.D. 19.05 I.D. 15.88 I.D. 15.88 I.D. 12.7 I.D. 19.05
I.D6.35
I.D. 9.52 I.D. 12.7 I.D. 12.7 I.D9.52 I.D6.35 I.D. 15.88 I.D. 15.88 I.D. 12.7 I.D. 12.7 I.D. 9.52 I.D. 9.52 I.D. 12.7 I.D. 12.7 I.D. 6.35 I.D. 15.88 I.D. 12.7 I.D. 12.7 I.D. 9.52 I.D. 6.35 I.D. 6.35 I.D. 12.7 I.D. 6.35 I.D. I.D. 9.52 12.7 I.D. 12.7 I.D6.35 I.D. 15.88 I.D. 15.88 I.D. 12.7
I.D. 12.7
I.D. 12.7
I.D. 12.7
I.D. 15.88
I.D. 15.88
I.D. 12.7
I.D12.7
O.D9.52
(under 95.2kW)
I.D31.8 I.D34.9
I.D15.88
I.D19.05
I.D. 12.7
I.D12.7 O.D9.52
I.D. 15.88
I.D9.52 I.D22.2
I.D. 6.35 I.D. 9.52 I.D. I.D. 6.35 6.35 I.D.9.52 9.52 I.D. I.D. 6.35 I.D. 9.52
I.D. 15.88
I.D. 15.88 I.D. 12.7 I.D. 9.52 I.D. 6.35 I.D. I.D. 12.712.7 I.D. 6.35 I.D. 9.52 I.D. 9.52 I.D. 6.35 I.D. 12.7 I.D. 9.52 I.D. 6.35 I.D. 12.7 I.D. 15.88 I.D. 12.7
I.D. 15.88
I.D22.2
I.D19.05
I.D15.88
I.D19.05
I.D9.52
I.D9.52
I.D6.35
ARBLN03321
(under 44.8kW)
I.D12.7
I.D12.7
I.D12.7
I.D12.7
I.D9.52 I.D12.7
I.D6.35
I.D38.1
I.D28.58
ARBLB03320
I.D22.2 I.D19.05 I.D15.88 I.D19.05
I.D22.2
ARBLB03320 ARBLB03320
ARBLB03321
(under 44.8kW)
I.D25.4
I.D12.7
I.D19.05
I.D22.2
I.D28.58
I.D. 19.05 I.D. 15.88 I.D. 19.05 I.D. 22.2 I.D. 19.05 I.D. 15.88 I.D. 22.2 I.D. 9.52 I.D. 12.7 I.D. 22.2 I.D. 19.05 I.D. 15.88 I.D. 22.2 I.D. 22.2 I.D. 19.05 I.D. 9.52 I.D. 12.7 I.D. 19.05 I.D. 9.52 I.D. 9.52 I.D. 12.7 I.D. 15.88 I.D. 15.88 I.D. 9.52 I.D. 19.05 I.D. 15.88 I.D. 22.2 I.D. 22.2 I.D9.52 I.D9.52 ARBLB03320 I.D6.35 6.35 I.D. 9.52 I.D. I.D. 12.7 I.D. 15.88 I.D. 9.52 I.D. 6.35 I.D. 15.88 I.D. 6.35 I.D. 15.88 I.D. 12.7 I.D. 9.52 I.D. 12.7 I.D. 15.88 O.D. 22.2 O.D. 28.58 O.D. 22.2 I.D12.7 I.D. 15.88 O.D. 28.58 I.D12.7 I.D. 25.4 I.D. 25.4 I.D. 12.7 I.D. 6.35 O.D. 22.2 O.D. 28.58 I.D. 15.88 I.D. 25.4 I.D. 12.7 I.D9.52 I.D6.35 O.D. 22.2 O.D. 28.58 I.D. 25.4 I.D12.7
I.D. 22.2 I.D. 19.05
I.D. 9.52 I.D. 6.35 I.D. 9.52 I.D. 6.35 I.D. 6.35 I.D. 9.52 I.D. 9.52 I.D. 6.35 I.D. 9.52 I.D. 6.35 I.D. 9.52
I.D. 19.05 I.D. 15.88I.D. 12.7 I.D. 15.88 I.D. 19.05 I.D. I.D. 19.05 12.7 I.D. 15.88
I.D. 19.05 I.D. 12.7 I.D. 12.7 I.D. 6.35 I.D. 9.52 I.D. 6.35 I.D. 9.52 I.D. 12.7 I.D. 22.2 I.D. 22.2 I.D. 9.52 I.D. 6.35 O.D. 19.05 O.D. 19.05 I.D. 12.7 I.D. 22.2 I.D. 6.35 O.D. 19.05 I.D. 9.52 I.D. 22.2 O.D. 19.05
O.D19.05
ARBLN23220
(over 168kW)
I.D. 22.2 I.D. 28.58
I.D19.05 I.D28.58
Mechanical Accessory
I.D. 22.2
I.D22.2 I.D15.88
I.D12.7
ARBLB07121
(under 95.2kW)
I.D12.7 I.D31.8
ARBLB07120
I.D19.05 I.D15.88 I.D31.8 O.D22.2 I.D28.58 O.D19.05 I.D22.2 I.D28.58
I.D. 28.58
I.D19.05
I.D. 25.4
ARBLB07120 ARBLB07120
I.D34.9 O.D31.8
I.D. 34.9 O.D. 28.58 I.D. 19.05 I.D15.88 22.2 I.D. O.D. 28.58 X 2 I.D. 15.88 I.D19.05 I.D. 31.8 I.D. I.D. 25.4 I.D.19.05 22.2 I.D. 15.88 I.D6.35 I.D. 34.9 O.D12.7 O.D. 28.58 O.D. 22.2 I.D. 15.88 X2 I.D. 31.8I.D9.52 I.D. 19.05 I.D9.52 I.D. 22.2 O.D. 19.05 I.D. 34.9 O.D. 28.58 I.D. 15.88 O.D. 22.2 I.D. 12.7 O.D12.7 I.D. 15.88 X2 I.D. 31.8 I.D. 19.05
I.D. 25.4 I.D. 22.2 I.D. 19.05 I.D. 25.4I.D. 28.58 I.D19.05 I.D. I.D.12.7 19.05 I.D. 28.58 I.D. 22.2 I.D. 12.7 I.D15.88 I.D12.7 I.D. 25.4 I.D. 19.05 I.D. 28.58 I.D. 19.05 I.D. 28.58 I.D. 22.2 I.D. 15.88 I.D. 12.7 I.D. 28.58 I.D. 25.4I.D. 19.05 I.D. 19.05 I.D12.7 I.D. 15.88 I.D. 22.2 I.D. 28.58 I.D. 12.7 I.D. 28.58 I.D. 19.05 X2 I.D. 15.88 I.D. 22.2
I.D. 12.7
I.D. 12.7
I.D. 15.88
I.D. 9.52
19.05 I.D. 22.2 12.7 I.D. 34.9 O.D. O.D. 28.58 O.D. I.D. 15.88 I.D. 31.8 I.D. 15.88 I.D. 19.05 O.D. 19.05 I.D. 12.7 I.D. 15.88 O.D. 19.05 I.D. 12.7 I.D. 15.88
I.D. 41.3
I.D34.9 I.D34.9 I.D41.3 I.D38.1 I.D28.58
I.D. 19.05 I.D. 19.05 I.D. 28.58 I.D. 28.58 I.D. 25.4 I.D. 6.35I.D. 19.05 I.D. 15.88 I.D. 9.52 I.D. I.D. 15.88 I.D. 28.58 19.05 I.D. 28.58 I.D. 12.7 I.D. 6.35 22.2 I.D.I.D. 19.05 I.D. 25.4 I.D. 15.88 I.D.9.52 9.52 I.D. I.D. 15.88 I.D. 12.7 I.D. 6.35 I.D. 22.2 I.D. 28.58 I.D. 19.05 28.58 I.D. I.D. 19.05 I.D. I.D. 15.88 12.7 I.D. 9.52 I.D. 12.7 I.D. 22.2 I.D. 19.05 I.D. 6.35 I.D. 12.7 I.D. 9.52 I.D. 15.88 I.D. 9.52 I.D. 12.7 O.D. 19.05 I.D. O.D. 19.05 I.D. 9.52 19.05 I.D. 22.2 O.D. 12.7 I.D. 12.7 I.D. 12.7 I.D. 12.7 I.D. 9.52 I.D. 9.52 O.D. 19.05 O.D. 19.05 I.D. 12.7 I.D. 9.52 I.D. 19.05 O.D. 12.7 I.D. 12.7 I.D. 12.7 I.D. 12.7 I.D. 9.52 O.D. 19.05 O.D. 19.05 I.D. 9.52 O.D. 12.7 I.D. 12.7 I.D. 12.7 I.D. 9.52 O.D. 19.05 O.D. 19.05 I.D. 9.52 O.D. 12.7 I.D. 12.7 I.D. 12.7
I.D. 34.9
I.D. 19.05
I.D. 34.9
ARBLB14521
(under 168kW)
I.D41.3 O.D38.1
I.D38.1
I.D28.58
I.D. 34.9
ARBLB14520
O.D28.58 I.D22.2 I.D19.05
O.D22.2
I.D15.88 I.D19.05
I.D12.7 O.D15.88
ARBLB14520 ARBLB14520
I.D.53.98 1 I.D.44.48 420 490 I.D.34.9 O.D.38.1 2 3 175 I.D12.7 3 O.D15.88 70 I.D31.8 I.D.28.58 X2
I.D. 25.4 I.D. 19.05 I.D. 34.9 I.D. 15.88 I.D. 19.05 I.D. 19.05 I.D. 28.58 I.D. 9.52 I.D. 28.58 I.D. 15.88 I.D. 12.7 I.D. 34.9 I.D. 22.2 I.D. 19.05 I.D. 19.05 I.D. 34.9 I.D. 28.58 I.D. 15.88 I.D. 19.05 I.D. 31.8I.D. 41.3 I.D. 28.58 I.D. 25.4 I.D. 28.58 I.D. 12.7 I.D. 28.58 O.D. 34.9 I.D. 28.58 I.D. 38.1 I.D. 41.3 I.D. 22.2 I.D. 19.05 I.D. 34.9 I.D. 15.88 I.D. 19.05 I.D. 34.9 I.D. 25.4 19.05 I.D. 31.8 O.D. 28.58 I.D. 31.8 I.D. 41.3 I.D. 22.2 I.D. 15.88 I.D.I.D. 9.52 I.D. 34.9 I.D.15.88 19.05 12.7 I.D. I.D. 25.4 I.D. 28.58 I.D. 28.58 I.D. 38.1 I.D. 12.7 I.D. 28.58 I.D. 22.2 X2 O.D. 9.52I.D. 19.05 I.D. 19.05 O.D. 28.58 O.D. 19.05 I.D. 9.52 I.D. 9.52 I.D. 12.7 I.D. 31.8 O.D. 19.05 I.D. 15.88 I.D. 6.35 I.D. 25.4 I.D. 28.58 O.D. I.D. 19.05 I.D. 22.2 28.58 34.9 O.D. 25.4 I.D.I.D. 12.7 I.D. 15.88 I.D. 15.88 I.D. 38.1 I.D. 28.58 X2 I.D. 31.8 I.D. O.D. 28.58 I.D. 22.2 I.D.25.4 19.05 9.52 I.D.I.D. 12.7 I.D. 15.88 I.D. 28.58 O.D. 34.9 I.D. 28.58 I.D. 15.88 I.D. 28.58 I.D. 31.8 X 2 O.D. 28.58 I.D. 22.2 I.D. 25.4 O.D. 9.52 O.D. 19.05 I.D. 9.52 I.D. 12.7 O.D. 28.58 I.D. 12.7 O.D. 19.05 I.D. 6.35 I.D. 28.58 O.D. I.D. 19.05 I.D. 22.2 25.4 I.D. 28.58 O.D. 34.9 I.D. 12.7 I.D. 15.88 I.D. 15.88 O.D. 9.52 I.D. 31.8 I.D.9.52 25.4 O.D. 28.58 O.D. 28.58 O.D. 19.05 I.D. I.D. 12.7 O.D. 19.05 I.D. 22.2 I.D. 6.35 I.D. 12.7 I.D.25.4 I.D. 19.05 O.D. 25.4 I.D. 22.2 I.D. 12.7 I.D34.9 I.D. 15.88 I.D25.4 I.D22.2 I.D.22.2 I.D.19.05 I.D34.9 O.D. 9.52 O.D. 28.58 O.D. 19.05 I.D38.1 I.D28.58 I.D. 9.52 I.D41.3 I.D. 12.7 O.D. 19.05 I.D. 6.35 2 I.D. 19.05 O.D. 25.4 I.D. 22.2 2 I.D. 12.7 I.D. 15.88 I.D. 38.1
I.D. 41.3
I.D. 41.3
X2
I.D.25.4 I.D.22.2 I.D.19.05 96 346 379 I.D.15.88 I.D.12.7 X2 110 3 110 I.D9.52 O.D12.7 I.D6.35 3
I.D38.1 471 517 I.D19.05 I.D15.88 O.D38.1 I.D41.3 O.D22.2 3 120 I.D12.7 70 2 90 O.D28.58 2
125
ARBLB23220
(over 168kW)
O.D.44.48 2 3
I.D.53.98 X2
O.D.19.05 2 3
O.D34.9 3
I.D.15.88
Piping Accessory
3 O.D15.88
120
86 /87