Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
CAD STANDARDS FOR LYNAS ADVANCED MATERIALS PROJECT CONTRACT NO. 600035
DOCUMENT NO. 600035-WI-EN-2-3-1
OBJECTIVE
This CAD standard establishes the settings for modelling and drawing production using :- Microstation V7 for 3D models used in conjunction with PDS models. - Microstation XM for all other drawing documentation.
LampsOn Alliance is between UGL Resources and Lynas Malaysia SDN.BHD. 600035-WI-EN-2-3-1 Cad Standards Rev: 0 Date: 11/06/2010
Page: 1 of 14
LampsOn Alliance is between UGL Resources and Lynas Malaysia SDN.BHD. 600035-WI-EN-2-3-1 CAD Standards Rev: 0 Date:11/06/2010
Page: 2 of 14
WORK INSTRUCTION
1.0
DEFINITIONS
Definition Computer Aided Design. Microstation format graphics files and suffix. Microstation. Intelligent 3 Dimensional Information Structural Design Information model
2.0
2.1
GENERAL
Software
Microstation Microstation J XM V07.01.05.03 shall be used for all 3D modelling. V08.09.04.51 shall be used for all other drawing documentation.
2.2
Drawing Numbering
Refer Project Numbering Specification document 4219298-PM-GS-001.
2.3
2.4
Seed Files
The Project Seed Files shall be used for the creation of all models and drawings. The seed files contain the default settings described in this document. The following seed files are available. Note: Perth Base (Not the same in Mumbai) uStn Ver mu 7 7 7 7 7 7 8 m
su mm
mm mm m m m m m mm mm
5 Drawing Manager G:\<proj>\PDS\PDS3D\drwsdz.dgn 6 USTN 3D Models G:\<proj>\PDS\PDS3D\eqpsdz.dgn 7 Other Drawings G:\UGLRCAD\XM\projects\Lynas\ seed\3Dm1000mm80.dgn
LampsOn Alliance is between UGL Resources and Lynas Malaysia SDN.BHD. 600035-WI-EN-2-3-1 Cad Standards Rev: 0 Date: 11/06/2010
Page: 3 of 14
The correct seed file for Items 1 to 5 above are selected by the PDS/Frameworks software. Items 6, 7 & 8 require the user to select the correct seed file for the task.
2.5
Drawing Border
The Project Drawing Border shall be referenced into the drawing. The title block shall be filled out at the start of the drawing using the tags provided within the border cells. The first revision shall be filled in, Rev A PRELIMINARY / UNCHECKED A Preliminary Not For Construction stamp shall be placed in the bottom right hand corner of the border sheet above the title block.
2.6
Drawing Revisions
Refer Project Numbering Specification document 4219298-PM-GS-001. Contractual issue revisions shall be flagged with a Revision Triangle and the area revised clouded. Refer Level Allocation Table for settings. Subsequent issues shall remove the previous Revision Triangle and revision cloud. Refer WI-EN-2-3-5 Drawing Issue & Approvals.
2.7
Holds
Holds shall be placed on contractual issue drawings where information is not ready for release. The default Hold Designator shall be placed adjacent to the area on hold and clouded with a reverse cloud. Refer Level Allocation Table for settings. The Hold Designator shall also be placed below the notes area with a description of the hold. All holds shall be allocated from the Project Hold Register. Refer document 600035-WIEN-3-3-3.
2.8
2.9
LampsOn Alliance is between UGL Resources and Lynas Malaysia SDN.BHD. 600035-WI-EN-2-3-1 CAD Standards Rev: 0 Date:11/06/2010
Page: 4 of 14
2.10
Element Settings
a) Text Level Font Style Justification Sizes Refer Level Allocation Table MicroStation font 235 (v7 & XM) Top left for single line and multi line text Title Notes 5mm Colour 0, Weight 3 2.5mm Colour 0, Weight 1 (A3 drawings only) 3.5mm Colour 0, Weight 2
Alternative
All fonts shall be placed with Text height / Text width ratio equal to 1. Title Text shall be underlined when in body of drawing. b) Dimensions Dimensions shall be placed as dimensional elements and with association lock enabled. Dimensions shall only be dropped in extreme circumstances. Level Font Text size Alternative Other Symbology Terminator Extension Lines Orientation
V7
Refer Level Allocation Table MicroStation font 235 (v7 & XM) 3.5mm 2.5mm Colour 0, Weight 2 Colour 0, Weight 1 (A3 drawings only) Colour 5, Weight 1 Filled Arrow, Width = 1.0, Height = 0.3 Offset = 0.5, Extension = 0.5 Above Centre View
XM
Justification Alignment
2.11
Standard Symbols
Symbols shall be as selected from the pull down menu.
LampsOn Alliance is between UGL Resources and Lynas Malaysia SDN.BHD. 600035-WI-EN-2-3-1 CAD Standards Rev: 0 Date:11/06/2010
Page: 5 of 14
Contour Surfaces Roads, Parking, Laydown Railway Signs Trees, Natural Features Existing Buildings Existing Utilities / Services Miscellaneous
SDIM Plan, Text SDIM Alpha Grid Text SDIM Number Grid Text SDIM Holes SDIM Plate Structural Beams Columns Bracing Handrail 25mm Webgrate 32mm Webgrate Grating
LampsOn Alliance is between UGL Resources and Lynas Malaysia SDN.BHD. 600035-WI-EN-2-3-1 CAD Standards Rev: 0 Date:11/06/2010
Page: 6 of 14
27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
Mechanical
Piping
Electrical, Instrument
52 53 54 55 56 57 58 59 60 SYSTEM LEVELS
Pipe Supports Electrical Cable Tray Layout Instrument Cable Tray Layout Distribution Boards
LampsOn Alliance is between UGL Resources and Lynas Malaysia SDN.BHD. 600035-WI-EN-2-3-1 CAD Standards Rev: 0 Date:11/06/2010
Page: 7 of 14
LampsOn Alliance is between UGL Resources and Lynas Malaysia SDN.BHD. 600035-WI-EN-2-3-1 CAD Standards Rev: 0 Date:11/06/2010
Page: 8 of 14
LEV EL
DISCIPLINE
LEVEL DESCRIPTION 300 Dia 400 Dia 300 Dia 400 Dia 300 Dia 400 Dia
Line weight 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Piles broken 8 CONCRETE Pile Out of position Piles 9 10 11 12 13 14 15 16 17 18 19 20 25 26 30 31 Pre cast drain
Pre cast open U drain Precast covered culvert Brick / Block work Brick drains concrete base
Brick drain
40
Grids
55
MISCELLANEOUS
LampsOn Alliance is between UGL Resources and Lynas Malaysia SDN.BHD. 600035-WI-EN-2-3-1 CAD Standards Rev: 0 Date:11/06/2010
Page: 9 of 14
Blinding Footings, Pile caps <=5m3 Footings, pile caps >5m3 and <=50m3 Footings, pile caps >50m3 Ground beams Ground Slabs, Ramps Plinths, Pedestals, Columns Kerbs <=450 high Walls >450 high Liquid retaining Slabs Liquid retaining Walls Suspended Beams Suspended Slabs
LampsOn Alliance is between UGL Resources and Lynas Malaysia SDN.BHD. 600035-WI-EN-2-3-1 CAD Standards Rev: 0 Date:11/06/2010
Page: 10 of 14
LampsOn Alliance is between UGL Resources and Lynas Malaysia SDN.BHD. 600035-WI-EN-2-3-1 CAD Standards Rev: 0 Date:11/06/2010
Page: 11 of 14
Users may create additional level filters if required on a per drawing basis so that they can restrict the displayed level names. Note that level filters only filter the display of the levels for selection in the level pull down box and in the level manager. Level Filters do not affect the display of any graphics. Use the Level Display dialog for that. Standard level names for MicroStation XM are as shown in fig.1 below. These levels will be available in any CAD file that is opened and should be used where appropriate. The naming scheme is also a guideline so that where more levels are required for any purpose; they should be named using the same consistent naming scheme. This allows any new levels to be included in the existing level filters as the filters are defined as the first three characters of the level name, followed by wild card for the rest of the level name e.g. levels that start with the characters Me_ will be included in the Mechanical level filter. 1.3 The following discipline based level filters exist. Each filter includes the discipline specific levels plus the standard annotation levels (named An_...). FIG 1
LampsOn Alliance is between UGL Resources and Lynas Malaysia SDN.BHD. 600035-WI-EN-2-3-1 CAD Standards Rev: 0 Date:11/06/2010
Page: 12 of 14
On the Recall Filter dialog, select the name of the required filter.
LampsOn Alliance is between UGL Resources and Lynas Malaysia SDN.BHD. 600035-WI-EN-2-3-1 CAD Standards Rev: 0 Date:11/06/2010
Page: 13 of 14
With Filter: set to CONCRETE, only Co_ and An_ levels are displayed.
LampsOn Alliance is between UGL Resources and Lynas Malaysia SDN.BHD. 600035-WI-EN-2-3-1 CAD Standards Rev: 0 Date:11/06/2010
Page: 14 of 14