Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Stress Office
Damage Tolerance & Fatigue substantiations, Static & Fatigue Tests
Airworthiness Authorities
Maintenance Certification
Customer Services
In-service experience Engineering / Repairs Scheduled Maintenance Technical data
Customers /
Airlines
Mce Engineering Mce Planning
MROs
1st EIS
M6/M7 M12 M13
1st A/C operational life # 30 years A/C Production # 20 years Last EIS Last A/C operational life # 30 years
MSG-3 Document Objective = To present a means for developing the scheduled maintenance tasks and intervals which will be acceptable to the regulatory authorities, the operators, and the manufacturers.
The working portions of MSG-3 document are contained in 4 sections, each of which contains its own explanatory material and decision logic. Systems / Powerplant, including components and APUs Aircraft structure Zonal inspections Lightning / High Intensity Radiated Field (L / HIRF)
Revision 2002.1
The ATA MSG-3 document is not a document that contains all the procedures / details necessary for analysis A Policy and Procedures Handbook should be prepared prior to the commencement of the activities, considering guidelines coming from MSG3 methodology, AC 121-22A, JAA GM (Sect.2-Part 2-Sect.16),
ISC
Industry Steering Committee
MRBR
Proposal
MSG3 Analysis MSG3 Analysis
MRB
Maint Review Board
PPH
MWG 4
MPDS
data base
MPD
Maintce Planning Document
10
MSI-Analyses SSI-Analyses
AIRBUS S.A.S. All rights reserved. Confidential and proprietary document.
Zonal-Analyses
12
13
MRB Report
(25.1529 Appx H)
3.Systems CMRs (25.1309 SSA 25.1529 App.H) 4.Ageing Systems Maintenance 5.Fuel ALIs
(SFAR 88 / CS25-981)
MPD
ALS Parts 1 to 6 *
ALS : Airworthiness Limitation
Section (* : Parts depending on the a/c program)
14
6.Aircraft ISS
(25.1301)
Structure
CS/FAR 25-571
Scheduled Maintenance
CS/FAR 25-1529
Fatigue Analysis
Safe Life
15
16
Maintenance Program
Component Maintenance Program: Airworthiness Limitation Items (ALS)
17
Maintenance Program
Component Maintenance Program: Airworthiness Limitation Items (ALS)
18
Maintenance Program
Component Maintenance Program: Airworthiness Limitation Items (ALS)
19
March 2011
AIRBUS S.A.S. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of AIRBUS S.A.S. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of AIRBUS S.A.S. This document and its content shall not be used for any purpose other than that for which it is supplied. The statements made herein do not constitute an offer. They are based on the mentioned assumptions and are expressed in good faith. Where the supporting grounds for these statements are not shown, AIRBUS S.A.S. will be pleased to explain the basis thereof. AIRBUS, its logo, A300, A310, A318, A319, A320, A321, A330, A340, A350, A380, A400M are registered trademarks.
Page 20
AIRBUS S.A.S. All rights reserved. Confidential and proprietary document.