Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
L := 0.8m bB := 150mm h := 100mm cover := 30mm fck := 30MPa fyk := 500MPa fck fcd := C fyk fyd := y C := 1.5 y := 1.15
= 17.5
kN m
1 10
1 10
M( x)
V ( x)
1 10
0.2
0.4 x
0.6
0.8
1 10
0.2
0.4 x
0.6
0.8
M d.hB := Vd.B :=
1 12
q L = 0.933 kN m AsB_t := = 7 kN
d bar_t1 4
n barB_t1 = 235.619 mm
q L 2
1 Design for Flexure Effective depth (8.8.1.1 (iii) - Design of Structural Elements, Third Edition. Arya) Ultimate moment of resistance Lever arm (eq.8.22 - Design of Structural Elements, Third Edition. Arya) Area of steel required in tension layer deffB_h := h cover 0.5 dbar_t1 d s = 59 mm KoB_h := M d.hB b B deffB_h fck
2 2
= 0.06
0.25
3KoB_h 3.4
= 0.056 m
M d.hB 2 AsB_h1 := = 38.51 mm 0.87 fyk zhB AsB_h1 UFM_hB := = 0.163 AsB_t
Utilisation Factor
2 Design for Shear The design value for the shear resistance of the concrete is given by the following expression (Eq. 6.2a [10]):
The design resistance is calculated for each thickness of concrete. The reinforcement is the same in orthogonal directions. 0.18 CRd.c := = 0.12 Coefficient CRdc C Factor with effective depth, k (cl.6.2.2 - Design of Structural Elements, Third Edition. Arya) Area of tensile reinforcement l - (cl.6.2.2 - Design of Structural Elements, Third Edition. Arya) kB := min 2 , 1 +
200mm deffB_h
=2
2
The concrete shear capacity is less than the design shear load in the beam. Shear reinforcement will be required in areas.
Coefficient for compression chord (6.2.3 (3) Note 3 [1]) Strength reduction factor for concrete cracked in shear (6.2.3 (3) Note 2 [1]) Angle between shear reinforcement and longitudinal axis
cw := 1
:= 0.6 1
= 0.528 250MPa
fck
:= 21.8
Maximum shear capacity Minimum reinforcement ratio (cl.9.2.2 [1]) Minimum area of shear links/ spacing Maximum spacing of shear links
VRd.max :=
= 29.004 kN
w.min :=
= 0.00088
Ashear_smin := w.min bB sin( ) = 0.131 mm smax := min 0.75 d effB_h , 600mm = 44.25 mm ds 1 As := 2 = 0.377 mm 4 s
2 ds 2 z fyd cot Vcaplink := min VRd.max , = 21.759 kN 4 s 2
Capacity of links