Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Hard Terrain
SIZE LOAD/ SPEED INDEX SIDEWALL PART # APPLICABLE RIMS
RECOMMENDED RIM
OVERALL DIAMETER
GEOMAX MX71 Front 70/100-17 40M 70/100-19 42M 80/100-21 51M 90/100-21 57M GEOMAX MX71 Rear 90/100-14 49M 90/100-16 52M 110/90-18 61M 120/90-18 65M 100/90-19 57M 110/80-19 59M 100/90-19 62M 120/80-19 63M 32HP27 32HP28 32HP30 32HP06 32HP32 32HP55 32HP36 32HP77 1.60 1.85 1.85 2.15 1.85 2.15 2.15 2.15 21.38 23.46 26.10 26.81 26.89 27.44 27.44 27.13 4.13 4.21 4.88 5.20 4.69 5.08 5.08 5.31 16/32 16/32 20/32 20/32 20/32 20/32 20/32 20/32 32HP18 32HP20 32HP26 32HP10 1.40 1.40 1.60 1.60 22.83 24.84 27.72 27.99 3.31 3.27 3.66 3.82 12/32 12/32 14/32 14/32
Intermediate Terrain
SIZE LOAD/ SPEED INDEX SIDEWALL PART # APPLICABLE RIMS
RECOMMENDED RIM
OVERALL DIAMETER
GEOMAX MX51 FRONT 2.50-10 2.50-12 60/100-14 70/100-17 70/100-19 80/100-21 90/100-21 33J 39J 30M 40M 42M 51M 57M 32CS17 32CS18 32CS15 32CS11 32CS13 32CS01 32CS02 1.50 1.50 1.40 1.40 1.40 1.60 1.60 15.08 17.17 18.94 22.87 24.88 27.87 28.03 2.76 2.80 2.80 3.27 3.23 3.66 3.86 10/32 10/32 12/32 13/32 13/32 15/32 15/32
GEOMAX MX51 REAR 2.75-10 80/100-12 90/100-14 90/100-16 110/90-18 120/90-18 38J 41M 49M 52M 61M 65M 32CS19 32CS16 32CS12 32CS14 32CS05 32CS06 32CS09 32CS10 32CS07 32CS03 32CS08 32CS04 1.50 1.60 1.60 1.85 1.85 2.15 1.85 2.15 1.85 1.85 2.15 2.15 15.39 18.39 21.42 23.50 26.14 26.85 26.30 27.09 26.46 26.73 27.13 27.13 2.99 3.66 4.13 4.21 4.80 5.20 4.61 5.00 4.65 4.96 5.04 5.12 11/32 15/32 16/32 17/32 20/32 20/32 20/32 21/32 20/32 20/32 20/32 20/32
100/100-18 59M 110/100-18 64M 100/90-19 110/80-19 110/90-19 120/80-19 57M 59M 62M 63M
Soft/Mud Terrain
SIZE
SIDEWALL PART #
APPLICABLE RIMS
RECOMMENDED RIM
OVERALL DIAMETER
OVERALL WIDTH
GEOMAX MX31 FRONT 2.50-10 2.50-12 33J 39J 32SE66 32SE67 32SE64 32SE60 32SE62 32SE55 1.50 1.50 1.40 1.40 1.40 1.60 15.35 17.20 19.06 22.91 24.88 27.91 2.80 2.83 2.80 3.27 3.27 3.70 10/32 10/32 12/32 14/32 14/32 15/32
60/100-14 30M 70/100-17 40M 70/100-19 42M 80/100-21 51M GEOMAX MX31 REAR 2.75-10 38J
80/100-12 41M 90/100-14 49M 90/100-16 52M 110/90-18 61M 120/90-18 65M 110/80-19 59M 120/80-19 63M
Hard-to-Intermediate Terrain
SIZE LOAD/ SPEED INDEX SIDEWALL PART # APPLICABLE RIMS
RECOMMENDED RIM
OVERALL DIAMETER
D739 Front 70/100-17 70/100-19 D739 Rear 90/100-14 90/100-16 49M 52M BW BW 32SB-27 32SB-28 1.60 1.60 21.20 23.50 4.13 4.33 16/32 16/32 40M 42M BW BW 32SB-18 32SB-20 1.40 1.40 23.00 25.10 3.27 3.31 12/32 12/32
D739 A/T Rear 110/100-18 64M 120/90-19 66M BW BW BW 32TM-38 32TM-33 32TM-42 2.15 2.50 2.50 27.00 27.50 27.40 5.00 5.39 5.19 21/32 21/32 21/32
120/100-18 68M
D739FA-J Front (four stroke) 80/100-21 51M BW 32TP-26 1.60 27.80 3.60 14/32
Hard-to-Intermediate Terrain
SIZE LOAD/ SPEED INDEX SIDEWALL PART # APPLICABLE RIMS
RECOMMENDED RIM
OVERALL DIAMETER
OVERALL WIDTH
D745F Front 80/100-21 51M 90/100-21 57M D745 Rear 110/80-19 59M 120/80-19 63M 110/80-19 59M 120/80-19 63M BW BW BW BW 32RB-55 32RB-77 32RB-55 32RB-77 1.85 2.15 1.85 2.15 26.70 27.10 26.70 27.10 4.84 5.24 4.84 5.24 20/32 20/32 20/32 20/32 BW BW 32RB-26 32RB-10 1.60 1.60 27.90 28.00 3.58 3.70 14/32 14/32
Intermediate-to-Soft Terrain
SIZE LOAD/ SPEED INDEX SIDEWALL PART # APPLICABLE RIMS
RECOMMENDED RIM
OVERALL DIAMETER
D756 Front 80/100-21 D756 Rear 100/100-18 59M 110/100-18 64M 100/90-19 110/90-19 57M 62M BW BW BW BW 32SC-34 32SC-38 32SC-32 32SC-36 1.85 2.15 1.85 2.15 26.60 27.10 26.90 27.10 4.90 5.20 4.80 5.10 20/32 21/32 20/32 20/32 51M BW 32SC-26 1.60 27.80 3.60 15/32
Desert inflation pressures vary, but generally 14 psi is the minimum and 18 psi is the maximum. Dunlop offers two excellent desert tires: the D739 Desert A/T rear and the D606 front. Tires for enduro and hare scrambles are similar since both are primarily run in softer, wetter, muddier terrain with slippery rocks and areas with exposed tree roots. Since some areas of these courses can be hard and slippery, the tires must account for this as well. The tread compound used in these tires must provide an optimum balance between wet and muddy terrain traction and long-wearing durability. Casing constructions must flex readily for riding over slippery rocks and tree roots, yet provide ample resistance to punctures. The tread pattern should clean well, even under the worst conditions, yet offer predictable handling in dry terrain.
Inflation pressures for enduro/hare scrambles vary, but generally 14 psi is a minimum and 18 psi is a maximum. Dunlop's D739 (Hard to Intermediate) will be a great choice for the courses that are a little more hard packed while the D756 (Soft to Intermediate) is an excellent choice for the muddier courses.
Installation Instructions: 1. Apply about 3/4 of the supplied tube of lubricant sparingly to the outside of the mousse for a uniform, thin coating. 2. Insert lubed mousse into tire casing. 3. Apply the remainder of the lubricant to the part of the innertube that contacts the mousse. 4. Insert the innertube into the mousse. 5. Inflate the innertube slightly to help hold it in place. 6. When orienting tire/mousse assembly on the rim, position the rim lock cutout area on the mousse so that it lines up with the rim lock. 7. Line up innertube value stem with valve stem hole in rim while holding mousse so that rim lock cutout remains in place. 8. Lubricate both sides of the tire bead with a soap/water solution. 9. Pull innertube out slightly so that the valve stem can be positioned in the hole on the rim and secure stem loosely with nut. 10. Using tire iron, slip the first side of the tire over the rim. 11. Once one side is in all the way on the rim, pull that same tire bead over the second side of the rim only at rim lock area. 12. Push rim lock up and release tire lever to allow bead to slip back over rim and under the rim lock. 13. Make sure to push edge of mousse down inside rim to protect it from the tire irons when positioning remainder of bead. 14. Starting between the valve stem and the rim lock, begin levering the second bead over the rim working toward the rim lock. 15. Position the supplied Dunlop tire hold tool between tire and rim and push down over spoke and slide to hold in place. 16. Push the rim lock up and the lever bead over the rim. 17. Begin levering the bead on the rim continuing back toward the valve stem. 18. Place a tire lever between rim and tire and push down. This will keep tire in rim center. 19. Slowly continue to lever the tire onto the rim in small increments. 20. For ease of mounting, push as much of the bead down to the center of the rim as possible. 21. Once both beads are on, remove the tire tool and levers and inflate tire until beads are seated fully (up to maximum 40 psi). 22. Release air to allow the innertube to relax and center itself. 23. Inflate to 16 psi operating pressure. NOTE: If tire beads do not seat properly, release air, relubricate beads and reinflate. Never exceed a pressure of 40 psi to seat tire beads. Before using, be sure to reduce pressure to 16 psi operating pressure.