Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Use: Terminate and seal liquidtight flexible metal conduit to either oiltight, liquidtight or raintight box or enclosure. Connectors can be used with tapered thread female entry or unthreaded knockout using the provided sealing washer and locknut. Features: Furnished with locknut and sealing ring Liquidtight/Raintight/Oiltight Suitable for grounding (through 1-1/4) Suitable for wet locations Material/Finish: Zinc Die Cast Applicable Third Party Standards: UL Standard: 514B CSA Standard: C22.2 No. 18 NEMA: FB-1 Fed. Spec: W-F-406D, Type 1, Class 3, Style 1
Type LMM-01
Insulated Throat Catalog Number LMM-02 LMM-12 LMM-22 LMM-32 LMM-42 LMM-52 LMM-62 LMM-72 LMM-82 LMM-86 LMM-92
Trade Size
(inches)
Catalog Number LMM-01 LMM-11 LMM-21 LMM-31 LMM-41 LMM-51 LMM-61 LMM-71 LMM-81 LMM-85 LMM-91
Dimensions in Inches
A 1.58 1.52 1.69 2.06 2.06 2.09 2.15 3.54 4.05 4.44 4.99
B 0.53 0.53 0.53 0.58 0.61 0.63 0.63 1.02 1.07 1.09 1.15
C Dia. 1.18 1.29 1.57 1.81 2.18 2.51 3.03 3.68 4.38 4.98 5.54
TW
TW
Zinc Liquidtight Connectors
For Liquidtight Flexible Metal Conduit & Type B Flexible Non-Metallic Conduit Type LML
90
Use: Terminate and seal liquidtight flexible metal conduit, at 90 angle, to either oiltight, liquidtight or raintight box or enclosure. Connectors can be used with tapered thread female entry or unthreaded knockout using the provided sealing washer and locknut. Features: Furnished with locknut and sealing ring Liquidtight/Raintight/Oiltight Suitable for grounding (through 1-1/4) Suitable for Wet Locations Material/Finish: Zinc Die Cast Applicable Third Party Standards: UL Standard: 514B CSA Standard: C22.2 No. 18 NEMA: FB-1 Fed. Spec: W-F-406D, Type 1, Class 3, Style K Trade Size
(inches)
Type LML-01
Catalog Number LML-01 LML-11 LML-21 LML-31 LML-41 LML-51 LML-61 LML-71 LML-81 LML-85 LML-91
Insulated Throat Catalog Number LML-02 LML-12 LML-22 LML-32 LML-42 LML-52 LML-62 LML-72 LML-82 LML-86 LML-92
Dimensions in Inches
A 2.11 2.24 2.47 3.46 3.37 4.28 4.21 5.75 6.00 7.88 8.75
B 0.53 0.53 0.55 0.58 0.67 0.61 0.71 1.03 0.99 1.18 1.17
C 2.53 2.46 2.79 3.86 3.99 5.04 5.06 7.00 7.25 9.00 10.00
TW
Effective September, 2005 Copyright 2005 PAGE 32 800-621-1506 www.appletonelec.com
TW
Nylon Liquidtight Connectors
For Type B Flexible Non-Metallic Conduit Type NMM
Straight
Use: Terminate and seal liquidtight flexible nonmetallic conduit, Type B, to either oiltight, liquidtight, or raintight box or enclosure. Connectors can be used with tapered thread female entry or unthreaded knockout using the provided sealing washer and locknut. Material/Finish: Nylon - Gray
Trade Size Catalog (inches) Number 3/8* 1/2 3/4 1 NMM-01 NMM-11 NMM-21 NMM-31
Dimensions in Inches
Type NMM-01
Applicable Third Party Standards: UL Standard: 514B CSA Standard: C22.2 No. 18 NEMA: FB-1 Note:
All nylon construction resists salt water, weak acids,gasoline, alcohol, oil, grease and common solvents. No disassembly is required, the installer simply pushes the conduit or tubing onto the ferrule, then tightens the domed sealing nut. This completed assembly can then be assembled to the box or enclosure with the sealing washer and locknut provided. These connectors are reusable.
Type NML
90
Use: Terminate and seal liquidtight flexible nonmetallic conduit, Type B, at a 90 angle, to either oiltight, liquidtight, or raintight box or enclosure. Connectors can be used with tapered thread female entry or unthreaded knockout using the provided sealing washer and locknut. Material/Finish: Nylon - Gray Applicable Third Party Standards: UL Standard: 514B CSA Standard: C22.2 No. 18 NEMA: FB-1
Trade Size Catalog (inches) Number 3/8* 1/2 3/4 1 NML-01 NML-11 NML-21 NML-31
Dimensions in Inches
TW
Type NML-01
TW
Zinc Raintight Pulling Ells & PVC Entrance Caps
Threaded for Rigid Conduit & IMC Type HL
90 Female/Female
1/2 3/4 Use: Threaded 90 corner pulling elbows are used to facilitate pulling conductors through a sharp bend in a run of threaded rigid conduit or IMC. The removable cover gives ample access so that wire pulling can be achieved without any obstructions. Features: Raintight Material/Finish: Zinc Die Cast Applicable Third Party Standards: UL Standard: 514B CSA Standard: C22.2 No. 18 NEMA: FB-1 HL-500 HL-750 2.10 2.29 2.10 2.29 Trade Size
(inches)
Catalog Number
Dimensions in Inches
Type HL-500
Type PVC
Use: Weather resistant plastic entrance caps for rigid conduit, IMC, EMT, or PVC conduit service mast. Cover releases with screwdriver twist, no screws to back out. U-slots eliminate cumbersome 2-piece insulator. Complete with E.M.T. adapter. Material/Finish: PVC
Trade Size
(inches)
Dimensions in Inches
TW
Type PVC-100
Applicable Third Party Standards: UL Standard: 514B NEMA: FB-1
800-621-1506 www.appletonelec.com
TW
Aluminum Entrance Caps
Type ECO
Clamp-on Aluminum
Use: Clamp type weather resistant aluminum entrance caps for threaded or unthreaded rigid conduit, IMC or EMT service masts. Material/Finish: Aluminum/Natural Applicable Third Party Standards: UL Standard: 514B NEMA: FB-1 Trade Size
(inches)
Catalog Number ECO-100* ECO-101* ECO-102 ECO-103 ECO-104 ECO-105 ECO-106 ECO-107 ECO-108 ECO-109
Dimensions in Inches
A 2.70 2.80 3.40 3.32 4.75 5.75 7.00 8.50 8.50 8.75
B 3.25 3.64 4.15 4.61 5.79 6.90 10.50 11.75 12.25 12.50
Type ECO-100
Type ECS
Use: Set-screw type weather resistant aluminum entrance caps for unthreaded rigid conduit or IMC service masts. Material/Finish: Aluminum/Natural Applicable Third Party Standards: UL Standard: 514B NEMA: FB-1
Trade Size
(inches)
Dimensions in Inches
2 2-1/2 3 3-1/2 4
TW
Type ECS-105