Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
0
Install and configure a DHCP server in April 29, 2008
By Steven S. Warren
Dynamic Host Configuration Protocol (DHCP) is an invaluable service when you have a network larger than a handful
of computers. It's also a standard component of enterprise networks and sub networks. Microsoft Windows Server
2008's built-in DHCP server allows Windows machines (and any other TCP/IP-based machines and devices) to
obtain their IP addresses and network settings automatically, which can vastly simplify network configuration. In this
document, we'll discuss how to install and configure a DHCP server in Windows Server 2008, and we'll explore
some of the advanced features DHCP has to offer.
Create a plan
Before you configure your DHCP server, it is a good idea to have all your ducks in a row. Prepare and have all the
necessary information up front before sitting down and configuring your server. For example, you may need to
know:
The scope of IP addresses that your server will manage (e.g., 192.168.1.50 to 192.168.1.200).
Which machines require static IP addresses (i.e., those machines such as servers and routers that will not
use DHCP to receive their IP addresses but will be set manually).
Which network information you want to send out to DHCP clients when they get their IP addresses (e.g., the
addresses for your default gateway, DNS servers, and WINS servers).
It is much easier to configure your DHCP server with this information in hand rather than scrambling for it at
implementation time.
Installing DHCP
Installing a DHCP server in Windows 2008 is a snap. They created a very simple wizard that walks you through
the entire process. Follow me on this journey.
To install a DHCP server from the Control Panel, follow these steps:
1. From the Start menu, select | Control Panel | Administrative Tools | Server Manager.
2. Expand and click Roles (Figure A).
3. Choose Add Roles and follow the wizard by selecting the DHCP role (Figure B).
4. A new DHCP wizard appears to help you configure a DHCP server.
Page 1
Copyright ©2008 CNET Networks, Inc. All rights reserved.
For more downloads and a free TechRepublic membership, please visit http://techrepublic.com.com/2001-6240-0.html
How do I: Install and configure a DHCP server in Windows Server 2008?
Figure A
Server Manager
Figure B
Page 2
Copyright ©2008 CNET Networks, Inc. All rights reserved.
For more downloads and a free TechRepublic membership, please visit http://techrepublic.com.com/2001-6240-0.html
How do I: Install and configure a DHCP server in Windows Server 2008?
Figure C
Figure D
Page 3
Copyright ©2008 CNET Networks, Inc. All rights reserved.
For more downloads and a free TechRepublic membership, please visit http://techrepublic.com.com/2001-6240-0.html
How do I: Install and configure a DHCP server in Windows Server 2008?
Figure E
About scopes
When you create a scope, you must select the range of IP addresses and you must specify the appropriate scope
options to include. These options are what we were referring to above when we mentioned that you can assign
other network information to your clients at the time they are given an IP address.
There are two types of scope options: Global and Scope. Global options are propagated to all the scopes that you
create on that DHCP server, while Scope options are only for the individual scope that you are working with.
For example, if you have different scopes for several different subnets and each subnet will have a different
default gateway but will share the same DNS servers, you would want to set the DNS servers as a Global option
while the default gateways would be set separately in each scope as a Scope option.
On the DHCP scope window, you will create your scope. Depending on the size of your network and the amount
of users that will be assigned IP addresses, some thought must be given to the parameters of your scope
selections. In my example (Figure F), I created a simple scope.
Page 4
Copyright ©2008 CNET Networks, Inc. All rights reserved.
For more downloads and a free TechRepublic membership, please visit http://techrepublic.com.com/2001-6240-0.html
How do I: Install and configure a DHCP server in Windows Server 2008?
Figure F
Figure G
Page 5
Copyright ©2008 CNET Networks, Inc. All rights reserved.
For more downloads and a free TechRepublic membership, please visit http://techrepublic.com.com/2001-6240-0.html
How do I: Install and configure a DHCP server in Windows Server 2008?
With Windows Server 2008, if you have a router (Figure H) that supports and is configured to take advantage of
IPv6, you can enable this functionality on your network.
Figure H
In previous versions of Windows Server, you had to install and configure your DHCP server and then authorize it
in the DHCP MMC snap-in. Authorizing your DHCP server allows you to prevent hackers from configuring rogue
DHCP servers. In Windows Server 2008, you have the ability to either authorize the server in the Wizard or
authorize it after the fact in the DHCP MMC-snap-in (Figure I).
Figure I
Page 6
Copyright ©2008 CNET Networks, Inc. All rights reserved.
For more downloads and a free TechRepublic membership, please visit http://techrepublic.com.com/2001-6240-0.html
How do I: Install and configure a DHCP server in Windows Server 2008?
You are now ready to review (Figure J) and confirm your settings before applying your DHCP settings (Figure
K).
Figure J
Figure K
Page 7
Copyright ©2008 CNET Networks, Inc. All rights reserved.
For more downloads and a free TechRepublic membership, please visit http://techrepublic.com.com/2001-6240-0.html
How do I: Install and configure a DHCP server in Windows Server 2008?
Once you have installed the DCHP server, you can manage it from the DHCP MMC snap-in (Figure O) located in
Administrative tools. On this screen you can create additional exclusions and reservations.
Adding reservations
In addition to specifying exclusions, you can add reservations to your DHCP server. By adding a reservation, you
ensure that a machine always receives the same IP address from the DHCP server.
1. Right-click on Reservations and choose new reservation.
2. Enter a friendly name for the reservation and the IP address you want to assign to the computer or device.
3. Enter the MAC address of the computer or device. (For Windows machines, you can find the MAC address by
running ipconfig/all from the command prompt of the machine.)
4. Enter a description and then choose the following reservation type: DHCP, BOOTP (going across a router), or
both, as shown in Figure L. Click Add.
Figure L
Adding a reservation
Adding exclusions
In addition to specifying reservations, you can add exclusions to your DHCP server (Figure M). By adding
exclusions, you ensure that machines never receive a DHCP lease for that range of IP addresses. This is very
useful to block IP addresses for your servers and routers.
Page 8
Copyright ©2008 CNET Networks, Inc. All rights reserved.
For more downloads and a free TechRepublic membership, please visit http://techrepublic.com.com/2001-6240-0.html
How do I: Install and configure a DHCP server in Windows Server 2008?
Figure M
Adding an exclusion
In order to add Exclusions, right-click on Address Pools and choose New Exclusion Range as shown in Figure N
and Figure O.
Figure N
Figure O
Troubleshooting DHCP
After configuring DHCP, the easiest way to troubleshoot it is to use Ipconfig from a command prompt. To view all
TCP/IP information on a machine just type ipconfig/all. To release a DHCP lease, type ipconfig/release; to renew
a lease, type ipconfig/renew.
Page 9
Copyright ©2008 CNET Networks, Inc. All rights reserved.
For more downloads and a free TechRepublic membership, please visit http://techrepublic.com.com/2001-6240-0.html
How do I: Install and configure a DHCP server in Windows Server 2008?
Additional resources
TechRepublic's Downloads RSS Feed
Sign up for TechRepublic's Downloads Weekly Update newsletter
Check out all of TechRepublic's free newsletters
Catch up with all the How do I articles on TechRepublic.
Version history
Version: 1.0
Published: April 29, 2008
Thanks!
Page 10
Copyright ©2008 CNET Networks, Inc. All rights reserved.
For more downloads and a free TechRepublic membership, please visit http://techrepublic.com.com/2001-6240-0.html