Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
www.getotec.de
GETOtec
Content
Ordering key Trapezoidal threaded bars - GTRPTS Trapezoidal rolled threaded bars - GTRTS Trapezoidal rolled threaded bars - GTRATS Trapezoidal rolled threaded bars 2 4 6 1
Trapezoidal threaded nuts - GTVKM Trapezoidal threaded nuts - GTSKM Trapezoidal threaded nuts - GTKSM Trapezoidal threaded nuts - GTLSM Trapezoidal threaded nuts - GTLRM Trapezoidal threaded nuts - GTBFM Trapezoidal threaded nuts - GTFMR Trapezoidal threaded nuts - GTLKM Trapezoidal threaded nuts 8 9 10 11 12 13 14 15
GETOtec
Ordering key
GTRPTS . 16 . 4 . 1000 . RG . C
Type Customized
Editing the spindle after drawing.
Diameter of spindle
GTESKM . 16 . 4 . EG . RG . C
Type Customized
Editing the nut after drawing.
Diameter of nut
Thread direction
RG: right-hand thread LG: left-hand thread
GETOtec
GTRPTS Trapezoidal rolled threaded bars
Abmae
! Material: C35E ! Type of thread: Trapezoidal rolled threaded ISO 2901/2903 and DIN 103 tolerance 7e. ! Complete length: 3000 mm up to 28 mm, by 28 3000 mm and 6000 mm.
These precision threaded bars are for mechanical applications for transmission. They are made of C35E which makes it possible to obtain better performances in use and also better machining conditions. On request we can supply bars cut to length and also machined according to your drawings. Our bars are carefully packed in wooden boxes to protect them during transport and thus preserve their quality.
GETOtec
* avalaible in left-hand
GETOtec
GTRTS Trapezoidal rolled threaded bars
! Material: C15E ! Type of thread: Trapezoidal rolled threaded ISO 2901/2903 and DIN 103 tolerance 7e. ! Complete length: 3000 mm
These current quality threaded bars are for simple applications. On request we can supply bars cut to length and also machined according to your drawings. Our bars are carefully packed in wooden boxes to protect them during transport and thus preserve their quality.
GETOtec
GETOtec
GTRATS Trapezoidal rolled threaded bars
! Material: X2CrNiMo17.12.2 ! Type of thread: Trapezoidal rolled threaded ISO 2901/2903 and DIN 103 tolerance 7e. ! Complete length: 3000 mm
These threaded bars are obtained by rolling and are meant to be used in wet or corrosive environment. They are made of X2CrNiMo17.12.2 which ensures their resistance to nearly all types of corrosion. On request we can supply bars cut to length and also machined according to your drawings. Our bars are carefully packed in wooden boxes to protect them during transport and thus preserve their quality.
GETOtec
* avalaible in left-hand
GETOtec
GTVKM Trapezoidal threaded nut
! For manual control ! For low rotation speeds ! For clamping or locking functions ! For receiving dead weights
! Material: Steel 11SMnPb37 ! Type of thread after ISO 2901/2903 and DIN 103 tolerance 7H.
The use of steel/steel contact surface is not suitable for motorised motions!
Two starts
GETOtec
GTSKM Trapezoidal threaded nut
! For manual control ! For low rotation speeds ! For clamping or locking functions ! For receiving dead weights
! Material: Steel 11SMnPb37 ! Type of thread after ISO 2901/2903 and DIN 103 tolerance 7H.
The use of steel/steel contact surface is not suitable for motorised motions!
Two starts
GETOtec
GTKSM Trapezoidal threaded nut
! For manual control ! For low rotation speeds ! For clamping or locking functions ! For receiving dead weights
! Material: Steel 11SMnPb37 ! Type of thread after ISO 2901/2903 and DIN 103 tolerance 7H.
The use of steel/steel contact surface is not suitable for motorised motions!
Two starts
10
GETOtec
GTLSM Trapezoidal threaded nut
! For manual control ! For low rotation speeds ! For clamping or locking functions ! For receiving dead weights
! Material: Steel 11SMnPb37 ! Type of thread after ISO 2901/2903 and DIN 103 tolerance 7H.
The use of steel/steel contact surface is not suitable for motorised motions!
Two starts
11
GETOtec
GTLRM Trapezoidal threaded nut
! For manual or powered control ! For low and medium rotation speeds ! For working under load
! Material: Bronze CuSn8P ! Type of thread after ISO 2901/2903 and DIN 103 tolerance 7H.
The use with steel or stainless steel screws gives good results, especially if lubrication is correctly Ensured.
Two starts
12
GETOtec
GTBFM Trapezoidal threaded nut
! For manual or powered control ! For low and medium rotation speeds ! For working under load
! Material: Bronze CuSn8P ! Type of thread after ISO 2901/2903 and DIN 103 tolerance 7H.
The use with steel or stainless steel screws gives good results, especially if lubrication is correctly ensured.
Two starts
13
GETOtec
GTFMR Trapezoidal threaded nut
! For manual or powered control ! For low and medium rotation speeds ! For working under load
! Material: Bronze CuSn8P ! Type of thread after ISO 2901/2903 and DIN 103 tolerance 7H.
The use with steel or stainless steel screws gives good results, especially if lubrication is correctly Ensured.
Two starts
14
GETOtec
GTLKM Trapezoidal threaded nut
! For manual or powered control ! For medium and high rotation speeds ! For working under moderate load ! Very low sound level
! Material: Plastic PA 6.6 ! Type of thread after ISO 2901/2903 and DIN 103 tolerance 7
The use with steel or stainless steel screws gives very good results. Can be used without lubrication, but the service life will be reduced.
Two starts
15
GETOtec
All rights reserved. Reprinting, in whole or in part, is not permitted without our approval. Note: We always strive to ensure that the contents of our publications are of the highest quality. However, although the greatest care is exercised in this regard, we cannot warrant or accept liability for the accuracy, up-todate status or completeness of the content and information in this catalog. We reserve the right to update the content and the technical characteristics of the products in this catalog at any time. Version: TGW 0211
16
GETOtec
Schwindstrae 9 D-80798 Munich Telephone: +49 (0)89/ 954164-10 Fax: +49 (0)89/ 954164-11 E-Mail: info@getotec.de www.getotec.de